Belkin F8Z919 TuneStage® 2 for iPod® User Manual

Belkin International, Inc. TuneStage® 2 for iPod®

a href="https://usermanual.wiki/Belkin" itemprop="url"> Belkin >

User Manual

IntroductionUser ManualTuneStage® 2 for iPod®
Setup Instructions | 02Introduction | 01IntroductionTuneStage 2 provides a stylish, easy way to play your iPod tunes through your home stereo—without wires. Setup takes only minutes and requires no software or custom configuration. Just plug it in and enjoy your music.TuneStage 2 from Belkin delivers the pristine, CD-quality sound that iPod users demand. Featuring advanced Bluetooth 2.0 technology for enhanced audio quality, the TuneStage 2 provides improved rejection of interference, and lower power consumption compared to the Bluetooth 1.2 standard. TuneStage 2 transmits wirelessly from up to 10m away from your stereo, even through walls. Please review this User Manual carefully so that you can be sure to get the most from your TuneStage 2.The TuneStage 2 works with any iPod that has a dock connector on the bottomPackage IncludesSTEP 1: TuneStage 2 Receiver Setup1. Power off your stereo system.2. Plug the TuneStage 2 Receiver into one of your home-stereo, audio-source inputs using the supplied audio cable, usually the “aux” input is a good choice. Do not connect TuneStage 2 to your receiver’s “phono” input. 3. Plug the included power adapter into the TuneStage 2 Receiver and then plug the other end into an AC outlet.4. Press in the power button located at the back of the TuneStage 2 Receiver. 5. Power on your home stereo and select the audio-source input to which the TuneStage 2 Receiver is connected. Setup Instructions1.8m Dual RCA-to-3.5mm Stereo Cable12V/1.0A AC Power AdapterTuneStage 2 Bluetooth™ TransmitterTuneStage 2 Bluetooth Receiver2 RCA or 3.5mm Mini-Jack Stereo ConnectionsDC-Power-Adapter Connection ^EdY^EdYb^c^bV`^c\XdccZXi^dch XdccZXii]ZIjcZHiV\ZIgVchb^iiZgidi]Z^EdY jcYZghiVcY^c\i]ZA:9h"dg"e^X`dcZ/IjcZHiV\ZbVcjVa^aajhigVi^dch7Za`^c>9<%)$%*$%*dYh0.9m USB A-to-Mini-B CableiPod with video 30GB
Setup Instructions | 03 Operating Instructions | 04Wall-Mounting the TuneStage 2 Receiver (Optional)1. Make sure the antenna is pointed upward.2. You can hang the Receiver on a wall using two screws (not included).3. The cables should run through the channel on the bottom of the Receiver, so they are held securely to the wall.Setup InstructionsSTEP 2: TuneStage 2 Transmitter Setup1. For best results, the Transmitter should be close to the Receiver when first making the wireless connection. 2. Power on your iPod, and then insert the TuneStage 2 Transmitter into the bottom of the iPod. Wait approximately two seconds and press “PLAY” on the iPod. 3. The Transmitter will power on automatically, and the blue LED will begin to blink rapidly while it searches for the Receiver to which to pair. The Receiver LED will also blink rapidly during this search mode. 4. The Transmitter and Receiver will pair with each other within 60 seconds. When the devices are paired and ready, the LED on the Receiver will remain on and the LED on the Transmitter will blink slowly. NOTE: The next time you start up the TuneStage 2, it will pair much faster as the Receiver remembers the last device with which it paired. This will usually happen in less than 10 seconds. 5. You can now play any song on your iPod through your stereo. For the best audio quality, adjust the volume level on your stereo to less than 50-percent full, and use just the iPod to change the volume up or down.Operating Instructions80mmiPod with video 30GB
Download:
Mirror Download [FCC.gov]
Document ID756209
Application ID1hLtxobr6pmUykpYqoIi6A==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize45.63kB (570336 bits)
Date Submitted2007-02-07 00:00:00
Date Available2007-02-07 00:00:00
Creation Date2006-12-08 09:29:46
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2007-02-07 10:20:25
Document TitleUser Manual
Document CreatorAdobe InDesign CS2 (4.0)
FCC ID Filing: K7SF8Z919

Navigation menu