Belkin F9K1007V1 N300 Wi-Fi Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2136580
Application ID	2y9FVXRSIrGBIDRloOITkg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.61kB (1107625 bits)
Date Submitted	2013-12-09 00:00:00
Date Available	2013-12-09 00:00:00
Creation Date	2017-10-24 19:20:50
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 19:20:50
Document Title	Microsoft Word - User Manual_8820np00774_rev_a00_f9k1007v1_1112-2013-ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	VeraHsu

N300 Wi-Fi ROUTER
USER MANUAL
Model Name: N300 Wi-Fi Router
Model Number: F9K1007V1
TABLE OF CONTENTS
Getting Started
What’s in the Box
Initial Setup
Manually Set Up Your Internet Connection
Additional Capabilities
Guest Access
Content Filtering by Norton
Getting to Know Your Router
Technical Details
Technical Features
System Requirements
Using Your Router
Enabling Auto Update on Your Router
Updating the Router’s Firmware via the Web Interface
Resetting the Router
Restoring your Router to Factory Default
Troubleshooting, Support, and Warranty
Troubleshooting
Technical Support
Belkin International, Inc., Limited 2-Year Product Warranty
Regulatory Information
FCC Statement
Getting Started
What’ s in the Box
N300 Wi-Fi Router
Ethernet cable (attached to router)
Power supply (attached to router)
Network information card (attached to router)
Quick Setup Guide
Initial Setup
Where to Place Your Router
For the best results, place the Router next to your modem in an
open location, away from large metal objects and magnets such as
those found in speakers. Raising the Router above floor level can
improve the strength of your wireless signal.
How to Set It Up
Connect Your N300 Router
Turn off your modem by disconnecting its power supply. Some modems have a battery
backup; this will need to be disconnected at this time as well.

Connect your Router to your modem using the cable (already attached).

Power up your modem by plugging in its power supply. If your modem has a battery
backup, it can be reconnected at this time; you may need to hold the reset button for
10 seconds.
Power up your Router by plugging in its power supply.

Connect to Your Router
The default network ID and password information for your Router
can be found on the product label on the bottom of the Router.

Use your computer, tablet, or smartphone to connect to the
wireless network shown on the router product label.
For information on how to connect your wireless devices, please see the “Connect Your
Wireless Devices” section on page 20.
When requested, please enter the password (security key) provided
on the card.
When your device has connected to the Router, use a
browser to visit http://router/. The router homepage will
appear.
If the page does not load, then try visiting http://192.168.2.1 to see
the router homepage.
Click the “Detect my connection” button in green. (If you would
rather set up the Router manually, click the “set it up manually”
link and proceed to page 10.)
After several moments, your Router should automatically detect
your Internet connection and restart. This can take anywhere from
30 seconds to 3 minutes depending on your connection type.
If your Router is unable to establish an Internet connection on its
own, you may be asked to restart your modem or provide a
username and password if your connection requires one. Follow
the on-screen instructions provided.
Once your Router is online, it will determine if there is a firmware
update available and offer to install it. Please allow up to 5 minutes
for the firmware to update.
If there are no updates available, then setup will proceed.
At the next screen you will be invited to change your network
name and password. Re-using your previous network name (SSID)
and password makes connecting your existing devices to the new
router much easier.
If you decide to change these settings, then enter the new values
and click “Save and Continue.” (Note: The password must be at
least 8 characters long.)
If you changed your network name and password, make note of it
on the service card located on the foot of the Router. You will then
have to connect to the new network.
Please take this opportunity to register your Router. This will help
technical support if there is a problem with your Router.
Simply complete each of the required fields and click “Complete
Registration.” If you don’t want to register right now, click
“Register Later” to proceed.
At the next screen you can download optional software that was
bundled with your Router.
This screen shows you optional software that is available for your
Router, such as the Belkin Wi-Fi app used to access your router’s
homepage quickly. If you wish to download and install this
software program, simply click on the button appropriate for your
device.
When finished installing optional software, click “Thanks, take me
to the dashboard.”
Congratulations! You are now at your Router’s dashboard. Your
Router is set up and ready to use.
Using the WPS Button
1) Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi‐Fi device that you would like to
connect wirelessly to your Router. Often there will be a
button for this purpose in software that came with the device,
or a physical “WPS,” “PBC,” or “Security” button on the device
itself.
2) Within two minutes, press the WPS button on your Router
and hold for two seconds.
The WPS light (small light above WPS button) will blink blue
while it listens for your Wi‐Fi device. Once a connection is
established, the light will turn solid blue and then go out. If a
connection is not established, the light will blink amber. You
may repeat the process to try again.
You can repeat this process for each WPS‐enabled device you’d
like to add to your network.
Manually Set Up Your Internet
Connection
Use a browser to visit http://router/. You can also try visiting http://192.168.2.1/. The
Router’s Welcome page should appear.
Click the “Set it up manually” link. Please select the type of connection your ISP
provides. Refer to page 16 for a description of the connection types.

If the selected connection type requires additional information
(such as an ISP username and password), the system will ask you
for it.
At the next screen you will be invited to change your network
name and password. Reusing your previous network name (SSID)
and password makes connecting your existing devices to the new
router much easier.
If you decide to change these settings, then enter the new values
and click “Save and Continue.” (Note: The password must be at
least 8 characters long.)
If you changed your network name and password, make note of it
on the service card located on the foot of the Router. You will then
have to connect to the new network. Please refer to page 20 to do
this.
Click “Great, what’s next?”
Please take this opportunity to register your Router. This will help
technical support if there is a problem with your Router.
Simply complete each of the required fields and click “Complete
Registration.” If you don’t want to register right now, click
“Register Later” to proceed.
At the next screen you can download optional software that was
bundled with your Router.
This screen shows you optional software that is available for your
Router, such as the Belkin Wi-Fi App to allow you to access the
Router’s homepage with ease. If you wish to download and install
any of these software programs, simply click on the button
appropriate for your device.
When finished installing optional software, click “Thanks, take me
to the dashboard.”
Congratulations! You are now at your Router’s dashboard. Your
Router is now set up and ready to use.
The status of your Internet connection is shown in the
upper left corner of the Router’s homepage.
If it does not say “Online,” troubleshooting information will be
displayed.
Manually Configuring Your Router’s
Internet from the Dashboard
To set up your ISP connection manually, select “ISP Connection
Type” from the list under the header “WAN Settings.”
Dynamic Connection
Cable and fiber customers generally require a dynamic
connection. Some DSL customers require a PPPoE
connection. Let’s try dynamic first. Select “Dynamic” from the
menu that appears and press “Next.”
A host name is generally not required. Hit “Save.” The Router will
restart.
If after a few minutes your Internet Status says “Online,” you’re
done! You can surf the Internet.
If these steps do not work, try restarting your modem and
repeating the process.
If not, we’ll try a PPPoE connection next.
PPPoE Connection
Some DSL customers require a PPPoE connection. Select
PPPoE this time and press Next.
Enter the username and password supplied by your Internet
provider and click “Save.” Ignore the other fields unless required
by your ISP. The Router will restart.
If after a few minutes your Internet Status says “Connected,”
you’re done! You can surf the Internet.
If these steps do not work, try restarting your modem and
repeating the process.
Con n e ct You r W ir e le ss D e vice s
iOS < Add iOS icon fr om w e lcom e ca r d>
( iPhone, iPad, and iPod t ouch)
1. Open t he Set t ings app and select t he Wi- Fi m enu it em .
2. Select your wireless net w ork from t he list t hat appears t here. I f
asked t o do so, ent er t he net w ork passw ord.
M a c OS® X < a dd M a c icon fr om w e lcom e ca r d>
Your Mac® provides a m enu of available wireless net w orks at t he right
end of t he m enu bar.
1. Click on t he icon show ing wireless w aves.
2. Select your wireless net w ork from t he list t hat appears t here. I f
asked t o do so, ent er t he net w ork passw ord.
An dr oid™ < a dd a n dr oid icon fr om w e lcom e ca r d>
( phones and t ablet s)
1. Open t he Set t ings app and select Wireless and Net work.
2. From t here, select Wi- Fi t o see t he list of available net w orks.
3. Select your wireless net w ork from t he list . I f asked t o do so, ent er
your net work password.
W indow s® 7 < a dd w in7 icon fr om w e lcom e ca r d>
Your com put er provides a m enu of available wireless net w orks at t he
right end of t he t ask bar.
1. Left - click on t he icon t hat looks like signal st rengt h bars.
2. Select your wireless net w ork from t he list . I f asked, ent er your
net work password ( net w ork key) .
W in dow s Vist a ® a n d W in dow s XP
Your device provides a m enu of available wireless net w orks at t he
right end of t he t ask bar.
1. Right - click on t he icon t hat show s a com put er w it h wireless
w aves ( XP) or t w o com put ers ( Windows Vist a) .
2. Choose “ View Available Wireless Net w orks ( XP) ” or “ Connect t o a
net w ork ( Vist a) ” from t he m enu.
3. Select your wireless net w ork from t he list . I f asked, ent er your
net work password ( net w ork key) .
Additional Capabilities
Optional Software
Belkin Wi‐Fi App
For easy access to your Router’s dashboard, download the Belkin Wi‐Fi app
from Google play or the App Store.
Guest Access
You can allow guests to use your Internet connection without
joining your personal network. The network name and password
for the guest network is located on the network information card
found under the foot of your Router.
A person using your guest network will be able to join without a
password, but will be shown a login page when they attempt to surf
the Web. They will need to enter the guest password into this page
to continue.
Website Filters. Powered by Norton
Web filters provide a first layer of whole-home Internet protection to guard you
from unsafe and inappropriate websites on any device on your network.
There are four different filtering options:
1. Block malicious, adult, and other non-family-friendly sites
2. Block malicious and adult sites
3. Block malicious sites
4. No filters
If you think a site should be added to the filtering list, submit a request at
safeweb.norton.com.
Content filtering may not work as intended if:
1. You are connecting through a VPN router.
2. You are routing traffic through a proxy server.
3. You have previously visited the site and it has been stored in your cache.
4. You manually set the DNS servers on your computer, tablet, or
smartphone.
Getting to Know Your Router
A) Wired (LAN) Connectors
Connect computers and other wired network devices to these ports
using Ethernet cables.
B) Modem (WAN) Connector
Connect your modem to this port using an Ethernet cable.
C) Power Connector
Connect the included power supply to this jack.
D) Reset Button
This button is used to restart your Router in rare cases when it
functions incorrectly. Resetting the Router will preserve your
settings. This button may also be used to restore the factory default
settings. Please see the Troubleshooting section for more
information.
E) Wi‐Fi Protected Setup (WPS) Light
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Router is listening for a WPS‐enabled computer or
other device.
Solid Blue: The Router has made a secure connection with the computer or
other device.
Amber: A connection was not created.
F) Wi‐Fi Protected Setup (WPS) Light and Button
The WPS button on the front of your Router can be used to help
establish a secure connection between your Router and other WPS‐
enabled Wi‐Fi devices such as computers. To use WPS, refer to
page 9.
G) Router Status Light
Your Router’s status is shown by the light on the front.
Off: The Router is not plugged into a power source.
Blinking Blue: The Router is starting up.
Solid Blue: The Router is connected to the Internet.
Blinking Amber: The Router can’t detect the modem. Either the modem is off, is not
plugged into the Router, or is unresponsive.
Technical Details
Technical Features
Integrated 802.11n Wireless Access Point
The N150 technology enhances your Router’s wireless capabilities,
allowing for data transfer speeds of up to 150Mbps across your network.
NAT IP Address Sharing
To save you the cost of adding IP addresses per computer in your house,
your Belkin Router uses Network Address Translation (NAT) technology,
allowing you to share a single IP address across your network.
SPI Firewall
Your Router is equipped with a firewall that will protect your network
from a wide array of common attacks and viruses.
Universal Plug-and-Play (UPnP) Compatibility
UPnP offers seamless operation of voice and video messaging, games, and
other applications that are UPnP-compliant.
Web-Based Advanced User Interface
You can easily make changes to your Router’s advanced settings through
your web browser. These changes can be made from any computer on your
network.
Integrated 4-Port 10/100 Switch
Your Router has a built-in, 4-port network switch to allow your wired
computers to share: printers, data, MP3 files, digital photos, and much
more.
System Requirements
Router
Broadband Internet connection such as a cable or DSL modem with RJ45
(Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
Setup
A computer running Internet Explorer® 8 or higher, Firefox®, Google
Chrome™, or Safari®
Minimum 1GHz processor and 512MB RAM
Or a smart device running iOS or Android operating systems
Using Your Router
Enabling Auto Update on Your Belkin Router
The Router will automatically check for a newer version of firmware every time you log into the
dashboard and alert you with a message at the top of the screen if there is an update
available. You can choose to download the new version or ignore it.
You will see a series of prompts warning you that the firmware is about to be updated. Please
do not disconnect the power from the Router at this time as it could cause the system to fail.
Updating the Router’s Firmware via the Web Interface
The following steps show you how to update your Router’s firmware using its web interface.
You do not need to be connected to the Internet as this interface is built into the Router
itself.
Setup steps:
1.
Locate and download the firmware file from the Belkin support site. (Type your part
number into the search box in the top right corner and look for “Firmware” in the title.)
2.
Save the file to a location on your computer where you can get to it easily, such as your
desktop.
3.
Connect the computer to one of the four LAN ports on the Router (refer to image).
4.
Open a web browser on the computer.
5.
In the address bar of the web browser, type “http://router” or “http://192.168.2.1” and
press “Enter” on your keyboard.
6. Click on “Firmware Update” toward the bottom.
7.
Click the “Choose File” button toward the middle of the screen to search for the file you
saved previously.
Note: The firmware version in the image above is depicted as an example. Your file name will
vary depending on your model and version.
8.
9.
Select the firmware file by left-clicking on it and then click the “Open” button in the lowerright corner of the window. This will take you back into the Router’s interface.
Click the “Update” button.
10.
A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click
“OK”.
11.
A second prompt will open telling you the Router will not respond during the upgrade and
warning you not to remove the power supply from the Router. Click “OK” once more.
Congratulations. The firmware has been updated successfully.
Resetting the Router
Reset Button – Red
The “Reset” button is used in rare cases when the Router may function improperly. Resetting the
Router will restore the Router’s normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the “Reset” button. Use the restore option in
instances where you may have forgotten your custom password.
Resetting the Router
Push and release the “Reset” button. The lights on the Router will momentarily flash. The
“Router” light will begin to blink. When the “Router” light becomes solid again, the reset is
complete.
Restoring Your Router to Factory Defaults
Press and hold the “Reset” button for at least 5 seconds, and then release it. The lights on the
Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light
becomes solid again, the restore is complete.
Restoring the Router to Default Settings Using the Web Interface
Symptoms
You need to restore the factory defaults using the web interface. This may be because the
Router is not performing as expected or you wish to remove all previously configured
settings.
Setup steps:
1.
Open a web browser on the computer.
2.
In the address bar of the web browser, type “http://router” or “http://192.168.2.1”.
3.
4.
5.
Click on “Restore Factory Defaults” in the left-hand column under the “Utilities”
heading.
Click on the “Restore Defaults” button.
A warning box will open that says, “Warning: All your settings will be lost. Are you sure
you want to do this?” Click “OK”.
6.
The Router will begin the restoring process. Once the restore is complete, the Router will
reboot.
Note: This may take several minutes.
Your Router has successfully been restored to its factory settings.
Troubleshooting, Support, and Warranty
Troubleshooting
I can’t connect to the Internet wirelessly.
If the light on the front of the Router is solid blue, then your Router
is connected to the Internet. You may not be connected to the
Router’s wireless network. Please refer to “Connect Your Wireless
Devices” on page 20 of this manual for instructions.
If your Windows XP computer is running SP2, you will not be able to set up the Router
via the wireless setup process. You will need to either update to Windows XP SP3 or
complete the setup via a wired connection.
I can’t connect to the Internet wirelessly and my network name is not listed in
Available Networks.
1) Verify that your Router is on and the front‐panel light shows
solid blue.
2) If you are far from the Router, you might try moving closer to
see if you might have been out of range.
3) Using a computer attached to the Router via a network cable,
visit http://router/ and ensure that “Broadcast SSID” is ON.
This setting is found on the “Channel and SSID” page.
My wireless network performance is slow, inconsistent, suffers from weak
signal, or I’m having difficulty maintaining a VPN connection.
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors that
will cause signal degradation (metal is generally the worst
culprit) are obstructions such as walls and metal appliances.
Note also that connection speed may decrease as you move
farther away from the Router.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer within 10 feet from
the Router if possible.
Changing the wireless channel—Depending
on local wireless traffic and
interference, switching the wireless channel of your network can
improve performance and reliability. See the section titled
“Changing the Wireless Channel” for instructions on how to
choose other channels.
Limiting the wireless transmit rate—Limiting
the wireless transmit rate can
help improve range and connection stability. Most wireless
cards have the ability to limit the transmission rate. To change
this property in Windows, go to the Windows Control Panel,
open “Network Connections”, and double-click on your wireless
card’s connection. In the properties dialog, select the
“Configure” button on the “General” tab, then choose the
“Advanced” tab and select the rate property.
Wireless client cards are usually set to automatically adjust the
wireless transmit rate for you, but doing so can cause periodic
disconnects when the wireless signal is too weak; as a rule,
slower transmission rates are more stable. Experiment with
different connection rates until you find the best one for your
environment. Note that all available transmission rates should
be acceptable for browsing the Internet. For more assistance,
see your wireless card’s user manual.
I’ve installed this new Router and some of my network clients (computers,
game consoles, etc.) are now unable to connect.
Your new Router came pre‐configured with a network name and
password, found printed on an attached card. All clients must use
this network name and password to connect wirelessly to your
Router. You will need to find the network settings on your client,
select the network name printed on the card from the list of
available networks, and enter the password when prompted to join
the wireless network.
Does the Router support Wireless Protected Access (WPA) security?
The Router ships with WPA/WPA2 security turned on. Windows XP
and some older network hardware may require a software update
to support WPA/WPA2.
I am having difficulty setting up WPA security on my Router.
1) Log in to your Router by visiting “http://router/” or
“http://192.168.2.1” with your web browser. Click “Security”
under the WiFi heading. You should now be on the Security
page.
2) Under Security Mode, select WPA/WPA2‐Personal (PSK).
3) Select “WPA/WPA2” from the drop‐down menu under the
Authentication heading.
4) Enter a password. This can be from 8–63 characters of your
choice, including spaces and punctuation, OR a 64‐digit
hexadecimal number (using only the numbers 0–9 and letters
A–F).
5) Click “Save” to finish. Your wireless connection is now
encrypted. Each computer using your wireless network will
need to use the new key.
Note: If you are configuring the Router over a wireless
connection, you will have to re‐connect to the Router after
changing any security settings.
Note: Some older networking hardware supports only WEP
encryption. If your older computers cannot connect to your
network, try 128‐bit or 64‐bit WEP, or seek software updates
from their manufacturers.
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my
Router.
1) Log in to your Router. Visit “http://router/” or
“http://192.168.2.1” with your web browser. Click
“Security” under the WiFi heading. You should now be on
the Security page.
2) Under Security Mode, select the “128‐bit WEP” option.
3) You may type in a WEP key manually, or generate one from a
passphrase. Type a phrase in the “Passphrase” field and click
the “Generate” button. A WEP key is composed of 26
hexadecimal digits (0–9, A–F). For example, C3 03 0F AF 4B
B2 C3 D4 4B C3 D4 EE 74 is a valid 128‐bit WEP key.
4) Click “Save” to finish. Your wireless activity is now encrypted.
Each computer using your wireless network will need to use
the new key.
Note: If you are configuring the Router over a wireless
connection, you will have to re‐connect to the Router after
changing any security settings.
Note: Some older networking hardware supports only 64‐bit
WEP encryption. If your older computers cannot connect to
your network, try 64‐bit WEP.
[pull trans. for Tech Support and Warrant statement from 8820np00774_RevA00]
Technical Support
US
http://www.belkin.com/support
UK
http://www.belkin.com/uk/support
Australia
http://www.belkin.com/au/support
New Zealand
http://www.belkin.com/au/support
Singapore
1800 622 1130
Europe
http://www.belkin.com/uk/support
Belkin International, Inc., Limited 2-Year Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this
Belkin product that the product shall be free of defects in design, assembly,
material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for two years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge
(except for shipping charges for the product). Belkin reserves the right to
discontinue any of its products without notice, and disclaims any limited warranty
to repair or replace any such discontinued products. In the event that Belkin is
unable to repair or replace the product (for example, because it has been
discontinued), Belkin will offer either a refund or a credit toward the purchase of
another product from Belkin.com in an amount equal to the purchase price of the
product as evidenced on the original purchase receipt as discounted by its
natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to
Belkin for inspection upon Belkin’s request at the sole expense of the purchaser,
or if Belkin determines that the Belkin product has been improperly installed,
altered in any way, or tampered with. The Belkin Product Warranty does not
protect against acts of God such as flood, lightning, earthquake, war, vandalism,
theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse,
damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.
How to get service.
To get service for your Belkin product you must take the following steps:
1.
Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa
Vista, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days
of the Occurrence. Be prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2.
Your Belkin Customer Service Representative will then instruct you on
how to forward your receipt and Belkin product and how to proceed with your
claim.
Belkin reserves the right to review the damaged Belkin product. All costs of
shipping the Belkin product to Belkin for inspection shall be borne solely by the
purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship
the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an
equipment repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from such repair
facility and of such estimate shall be borne solely by the purchaser. Damaged
equipment must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be subrogated under
any existing insurance policies the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED
BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION
OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN
DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS,
BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE
SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do not
allow the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
*Regulatory Information
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA
90094, declare under our sole responsibility that the device, F9K1007V1,
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Caution: Exposure to Radio Frequency Radiation. The radiated output power of
this device is far below the FCC radio frequency exposure limits. Nevertheless,
the device shall be used in such a manner that the potential for human contact
during normal operation is minimized. When connecting an external antenna to
the device, the antenna shall be placed in such a manner to minimize the
potential for human contact during normal operation. In order to avoid the
possibility of exceeding the FCC radio frequency exposure limits, human
proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the distance between the equipment and the receiver.
 Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance with
FCC RF exposure compliance requirements, please follow operation instructions
as documented in this manual.
This device and it's antennas(s) must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures.
The availability of some specific channels and/or operational frequency bands is
country-dependent and firmware is programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
Modifications
The FCC requires the user to be notified that any changes or modifications to this
device that are not expressly approved by Belkin International, Inc., may void the
user’s authority to operate the equipment.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may
cause undesired operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance with
IC RF exposure compliance requirements, please follow operation instructions as
documented in this manual.
IMPORTANT NOTICE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and your body.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
Industry Canada Statement:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour
un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11
peuvent être exploités. Sélection d'autres canaux n'est pas possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with IC multi-transmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en
association avec une autre antenne ou transmetteur.
This radio transmitter (IC: 3623A-F9K1007V1/ Model: F9K1007V1) has been approved by
Industry Canada to operate with the antenna types listed below with the maximum permissible
gain and required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
This device has been designed to operate with the antennas listed below, and having a maximum
gain of [2.52] dBi. Antennas not included in this list or having a gain greater than [x] dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de
PCB dipole antenne avec dBi [2.52]. Une antenne à gain plus élevé est strictement
interdite par les règlements d'Industrie Canada. L'impédance d'antenne requise est de 50
ohms.
Antenna List:
Connector Gain (dBi)
Ant.
Brand
Model Name
P/N
Antenna Type
Arcadyan
AR-08-302-0001
120300022800J
Dipole Antenna
N/A
1.6
Arcadyan
AR-07-302-0003
120300044600J
Dipole Antenna
I-PEX
2.52
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio
peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectriqueà l'intention des autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire àl'établissement d'une communication satisfaisante.
Le présent émetteur radio (IC: 3623A-F9K1007V1/ Model: F9K1007V1) a été approuvé par
Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant
un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
*Back cover

© 2012 Belkin International, Inc. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed. iPad, iPhone, iPod
touch, Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the
U.S. and other countries. Windows, Windows Vista, Internet Explorer, and
DirectX are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries. Android and Google Chrome are
trademarks of Google Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : VeraHsu
Create Date                     : 2013:12:09 11:52:11+08:00
Modify Date                     : 2013:12:09 11:53:32+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:12:09 11:53:32+08:00
Producer                        : Acrobat Distiller 9.5.3 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - User Manual_8820np00774_rev_a00_f9k1007v1_1112-2013-ok.doc
Creator                         : VeraHsu
Document ID                     : uuid:fa52ccf8-f026-4716-87f5-e95cd6578a3d
Instance ID                     : uuid:2ca605e9-a233-47f3-8579-42cba7157efd
Page Count                      : 44

EXIF Metadata provided by EXIF.tools