BenQ Mobile and OHG HHB130 Headset Bluetooth Clip User Manual Manual page 1

Download:
Mirror Download [FCC.gov]
Document ID	658514
Application ID	NA+YWvZ2nafzyxP9vcHYwQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.87kB (435846 bits)
Date Submitted	2006-05-16 00:00:00
Date Available	2006-05-16 00:00:00
Creation Date	2006-05-13 11:39:02
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-05-15 14:46:42
Document Title	Microsoft Word - Manual page 1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Teresa

Headset Bluetooth Clip
Brand Name: BenQ-Siemens
Model Name: HHB-130
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
Headset Bluetooth Clip (en)
Safety precautions
Please read the user guide and safety
precautions carefully before use!
Explain the content to your children
and the hazards associated with
using the device.
Remember to comply with
legal requirements and local restrictions when using
the device. For example in
aeroplanes, petrol stations, hospitals or while
driving.
The functioning of medical
devices such as hearing
aids or pacemakers can be
impaired. Keep at least
20cm/9 inches between
the clip and the pacemaker. For more information
consult your doctor.
Caution! Young children
may choke on small parts.
The device must therefore
be stored out of the reach
of small children.
The mains voltage specified on the power adapter
must not be exceeded.
Otherwise the charger may
be destroyed.
To charge the battery, plug
the power adapter into an
easily accessible mains
power socket. The only
way to turn off the charger
after charging the battery is
to unplug it.
Do not throw the device
into an open fire.
Use only original charging
devices. Otherwise serious
damage to health or property may result. The battery could explode, for
example.
The device may only be
opened by authorised
service partners. Any
changes to this device are
strictly prohibited and will
invalidate the operating
licence.
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
left page (2) of Headset Bluetooth Clip HHB-130/131 en, A31008-XXXX (25.04.2006,
Headset Bluetooth® Stereo (en)
Important:
Dispose of unusable devices and their accessories according to the legal
regulations.
The device may cause interference in the vicinity of
TV sets, radios and PCs.
Use only original accessories. This will avoid potential damage to health or
property and ensure compliance with all relevant
regulations.
Improper use will invalidate the
guarantee!
Permanent hearing loss may occur if
you use ear- or headphones at high
volume.You can adapt over time to a
higher volume, which may sound normal but can be damaging to your hearing. Set your volume to a safe level. If
you experience ringing in your ears,
reduce the volume or discontinue use
of your system.
In some countries there may be restrictions to the use of Bluetooth® devices. Please make enquiries at the
authorities responsible.
Compatibility
The Headset Bluetooth® Clip (referred
to hereafter as "headset") is suitable for
telephoning with mobile phones with
the Bluetooth Profile (Headset Profile or
Handsfree Profile).
Bluetooth®
technology
The rights to the Bluetooth® wordmark and the Bluetooth® logos are
owned by the Bluetooth® SIG, Inc.
Any use of such marks by BenQ
Corp. is under license.
Other trademarks and trade names
are those of their respective owners.
The headset and the mobile phone
communicate by means of Bluetooth®,
a short-range radio link.
To enable this communication, the
headset and mobile phone must be
paired with each other. For more information please read "Establishing the
first connection with the mobile phone
(pairing)", (page 7).
Please also read the notes on
Bluetooth® links in your mobile phone
user guide as the controls and display messages differ between
phones.
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
right page (3) of Headset Bluetooth Clip HHB-130/131 en A31008-XXXX (25.04.2006,
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
Headset Bluetooth Clip (en)
Overview of headset
1 Earphone
2 a On/Off button/
Multifunction button
Press briefly:
Activate voice dialling or
Accept a call
Press and hold:
End a call
3 Microphone
4 LED
signals different headset states
(page 8)
5 Volume buttons
Press – button: quieter
Press + button: louder
6 Clip
Please ensure that the clip is securely attached to the garment.
The place where the clip is attached should not be too thick.
7 Charger socket
8 Parking position for the
earphone
9 Charger
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
left page (4) of Headset Bluetooth Clip HHB-130/131 en, A31008-XXXX (25.04.2006,
Headset Bluetooth® Stereo (en)
Getting started
Wearing the headset
correctly
Wear the headset as shown in
the diagram. The microphoneopening must always point
towards your mouth.
Charging the headset
The battery is not fully charged
when delivered.
To charge the headset you will
need the charger included in the
delivery package. Please remember that the power socket must
be close by and freely accessible.
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
right page (5) of Headset Bluetooth Clip HHB-130/131 en A31008-XXXX (25.04.2006,
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
Headset Bluetooth Clip (en)
The battery should only be charged in
an ambient temperature of 0°C to
45°C, otherwise it will wear out prematurely. Please remember that
batteries are subject to wear.
1. Plug the charger 9 into the
headset 7 as shown.
2. Plug the power connector of
the charger into a mains power socket.
The device is not ready for operation while charging. It switches
off automatically during charging and must be switched on
again when charging is
completed.
Charging time
After two hours the battery is approximately 80% charged; the
device needs about 3.5 hours to
charge fully.
Display when charging is in
progress
The LED lights continuously during the charging process. When
the battery is fully charged, the
LED goes out.
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
left page (6) of Headset Bluetooth Clip HHB-130/131 en, A31008-XXXX (25.04.2006,
Headset Bluetooth® Stereo (en)
Switching the headset on
and off
• Switch on:
a Press for about
2 seconds. The LED
flashes at short intervals for 1 second, then
at long intervals. A
low and a high tone
can be heard.
If no connectable mobile phone can be
found, please repeat
pairing.
• Switch off:
a Press for about
3 seconds. The LED
lights continuously
for 1 second and then
goes out. A high and a
low tone can be
heard.
Establishing the first
connection with the mobile
phone (pairing)
The headset must be switched
off.
1. Press the a button for
at least 3 seconds. The LED
lights continuously, and two
high tones can be heard. Your
mobile phone can now "look
for" the headset.
2. Activate the search mode of
your mobile phone. Please
read the notes on this in the
user guide of your mobile
phone.
3. If your mobile phone finds
your headset, this is shown on
the mobile phone display
beneath the device name
HHB-130.
If your mobile phone does not find the
headset within 3 minutes, activate the
search mode again (repeat step 1).
4. If requested, enter the code
(PIN) of the headset on the
mobile phone:
0000
The headset is now registered to
your mobile phone.
For additional information
please consult your mobile
phone's user guide.
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
right page (7) of Headset Bluetooth Clip HHB-130/131 en A31008-XXXX (25.04.2006,
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
Headset Bluetooth Clip (en)
Meaning of the LED display
Calling
The flash sequence of the LED indicates the different operating
states of the headset:
The operating steps described
below apply only to selected Siemens and BenQ-Siemens mobile
phones; see compatibility table
on the package. Mobile phones
from other manufacturers may
be operated differently.
... (when the charg-
er is connected)
The headset is
charging.
Off
(when the charger is connected)
The headset
is fully charged.
Battery is empty.
...
... During pairing.
Pairing
successfully
completed.
... The headset is
switched on but
no connection
has been established with a mobile phone.
...
Incoming call.
...
...
Off
The headset is
ready for
operation.
During the
conversation.
The headset is
switched off.
• Switch the headset on (see
page 7).
Accepting/rejecting a call
a Press briefly: Accept
call.
a Press and hold: Reject
call, or end call.
Dialling via the mobile phone
Dial as usual on the mobile
phone.
Voice dialling
(if supported by the mobile
phone)
a Press briefly: Activate
voice dialling on the
mobile phone.
For additional information
please consult your mobile
phone's user guide.
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
left page (8) of Headset Bluetooth Clip HHB-130/131 en, A31008-XXXX (25.04.2006,
Headset Bluetooth® Stereo (en)
During calls
Louder.
–
Quieter.
The volume set here does not affect
the setting on the mobile phone.
a Press 2 x briefly : Hold
call. Press again
2 x briefly: Continue
call.
a Press and hold: End
call.
a Press and hold: End
Second call
the current call.
a Press briefly: Hold the
current call and accept the waiting call.
a Press 2 x briefly: Swap
between two calls.
a Press 2 x and hold: End
all calls.
Transferring a call
a Press briefly: Take the
current call on the
headset.
a Press briefly: Transfer
current call to phone
(if supported by the
phone).
For additional information
please consult your mobile
phone's user guide.
Troubleshooting
Headset does not work
• When the battery is becoming empty,
the headset gives a warning tone
¢ Charge the device.
Bluetooth® connection problems
• The Bluetooth Profile of your mobile
phone and your headset are not compatible, see page 3.
• No mobile phone is connected, see
page 7.
• You can recognise the threat of a call
being cut off by the poor audioquality.
¢ Reduce the distance between
headset and mobile phone.
• If the mobile phone is not connected
to the network, you will hear a recurring beep tone in the headset.
If the Bluetooth® connection to the
mobile phone is interrupted for several seconds during a call, you can
only continue the call with the
mobile phone.
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
right page (9) of Headset Bluetooth Clip HHB-130/131 en A31008-XXXX (25.04.2006,
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
10
Headset Bluetooth Clip (en)
Technical data and
approval
Headset
Li-Ion battery
110 mAh
Charging time up to 3.5 hours
Talktime
up to 8 hours
Standby time
up to 240 hours
Bluetooth®
range
max. 10 metres, less
in buildings
Operating
temperature
–0°C to +55°C
Total weight
approx. 20 g
CE:
BenQ Mobile hereby declares
that the device described in this
user guide is in compliance with
the essential requirements and
other relevant provisions of European Directive 1999/5/EC
(R&TTE). The relevant declaration of conformity (DoC) has
been signed. Please call the
company hotline if you require a
copy of the original, or visit:
www.BenQMobile.com/conformity
Power supply
Input
Output
110 V or
230 V AC, 50/60 Hz
FCC ID: PWX-HHB130
5 V DC/0.4 A
Declaration of conformity
FCC:
This device conforms to Part 15
of the FCC rules. Operation of
the device is subject to the following conditions: (1) this device does not generate any dangerous interference and (2) this
device is not impaired by any interference, even if such interference could have undesired effects.
N626
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
left page (10) of Headset Bluetooth Clip HHB-130/131 en, A31008-XXXX (25.04.2006,
Headset Bluetooth® Stereo (en)
Care
The product should be cleaned
with a soft cloth that is damp but
not wet.
Do not use cleaning agents, colorants or other chemical substances.
Protect the device from dampness and shock. Do not expose
the device to direct sunlight.
Accessories
Products can be obtained in specialist shopsor you can visit our
online shop at:
Original Accessories
www.BenQMobile.com/
shop
Travel Charger EU ETC-100
Travel Charger UK ETC-110
Car Charger Plus ECC-100
Both can be used in conjunction
with the Charger Adapter ECA-100
Customer service
See Customer Care, XX.
11
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
© Siemens AG 2005, C:\_Christine\Accessories\neuer Projektordner\HHB-130_131_Headset_B_Clip\05GUW00103
right page (11) of Headset Bluetooth Clip HHB-130/131 en A31008-XXXX (25.04.2006,
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
－ Reorient or relocate the receiving antenna.
－ Increase the separation between the equipment and receiver.
－ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
－ Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. To maintain compliance with
FCC RF exposure compliance requirements, please avoid direct
contact to the transmitting antenna during transmitting. End users
must follow the specific operating instructions for satisfying RF
exposure compliance.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2006:05:13 11:39:02Z
Modify Date                     : 2006:05:15 14:46:42+08:00
Page Count                      : 12
Creation Date                   : 2006:05:13 11:39:02Z
Mod Date                        : 2006:05:15 14:46:42+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Teresa
Metadata Date                   : 2006:05:15 14:46:42+08:00
Creator                         : Teresa
Title                           : Microsoft Word - Manual page 1.doc

EXIF Metadata provided by EXIF.tools