BenQ Mobile and OHG M75 GSM 1900 Mobile phone with BT User Manual SIR

BenQ Mobile GmbH & Co. OHG GSM 1900 Mobile phone with BT SIR

User Guide

Table of Contents 1See also Index at the end of this User Guide© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRIVZ.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (1) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Legal notices .............................. 3Safety precautions  ..................... 5Antenna care  ........................... 7Phone operation  ...................... 7Electronic devices  .................... 8Overview of phone  .................. 12Display symbols  ....................... 14Getting started ......................... 16Insert SIM card/battery  ........... 16Inserting anRS MultiMediaCard ................. 17Charge battery ....................... 18Switch on/off, PIN entry  ........... 19Entering the PIN ..................... 19Emergency number (SOS)  ...... 19General instructions  ................ 20Standby mode  ....................... 20Signal strength  ...................... 20Digital Rights Mgmt. (DRM) .... 20Main menu  ............................ 20Standard functions  .................. 22Highlighting mode  ................. 23Menu speed dialling ............... 23Security .................................... 24PIN code  ................................ 24Preventing accidentalactivation ............................... 25Text entry ................................. 26Calling ...................................... 30My items  .................................. 36Default book  ............................ 37Address book  ........................... 38New entry .............................. 38Change entry  ......................... 40Call entry  ............................... 40Groups ................................... 41Phonebook ...............................42New entry  ..............................42Call (search for an entry)  ........ 43Change entry  ......................... 43<Special books>  ..................... 44Call records ............................... 45Dur./charges ............................. 46Camera ..................................... 47Photo mode  ........................... 48Video mode ............................ 48Main Inbox  ............................... 50SMS ........................................... 51Write/send ..............................51Read .......................................53Setting ...................................55MMS ......................................... 57Create ....................................57Templates .............................. 59Send ...................................... 60Receive ..................................61Read ....................................... 62Setting ...................................63E-mail ........................................ 65Write ......................................65Receive/read ...........................66Setting ...................................67Voice message/mailbox ............ 68Chat room ................................. 69Start menu  .............................69Login ..................................... 70Contact lists  ...........................70Start Chat room ......................73Msg. history  ...........................74Setting ...................................74CB services ................................76Zoom in  .................................76Table of ContentsSee also In-dex at the end of this User Guide
2 Table of ContentsSee also Index at the end of this User Guide© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRIVZ.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (2) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Surf & fun ................................. 77Internet ................................. 77Bookmarks ............................. 79Games and Applications ......... 80Download wiz.  ....................... 80Settings .................................... 82Profiles .................................. 82Topics .................................... 84Display setup  ......................... 85Ring tones  ............................. 87Call setup ............................... 89Phone setup ........................... 91Clock ..................................... 93Connectivity .......................... 94Security ............................... 100Network .............................. 102Accessories .......................... 104My menu  ................................ 105Fast access  ............................. 106Speed dialling keys ............... 107Organizer ............................... 108Calendar .............................. 108Appointments ...................... 109Tasks ................................... 110Notes ................................... 111Missed appts. ....................... 111Dictat.machine .................... 112Time zones  .......................... 113Extras ..................................... 114SIM services (optional)  ......... 114Music player  ........................ 114PoC ...................................... 115Alarm clock .......................... 120Sound recorder  .................... 121Calculator ............................ 122Unit converter  ......................123Stopwatch ............................ 124Countdown .......................... 124Remote synchronisation  .......125Device manag.  ..................... 126Media player ........................... 127My stuff  .................................. 128RS MultiMediaCard  ............... 129Mobile Phone Manager  .......... 130Questions & Answers  ............. 132Customer Care ........................ 135Care and maintenance  ........... 137Product data  ........................... 138Accessories ............................. 139SAR (M75) ............................... 141Quality .................................... 143U.S. FDA .................................. 144FCC/Industry Canada Notice ..... 150Ten Driving Safety Tips ........... 151Intellectual Property ............... 153End user license agreement .................. 154Menu tree ............................... 158Index ....................................... 164
3Legal notices© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_LegalNotices.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (3) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:04)Legal noticesThe mobile phone described in this guide is approved for use on the GSM and GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries.© 2005 Siemens Information and Communication Mobile, LLC.All rights reserved.Siemens and the M75 model phone are trademarks or registered trade-marks of Siemens AG and/or its affili-ates in the United States and/or other countries.T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trade-marks and logos are trademarks or registered trademarks of Sun Micro-systems, Inc. in the U.S and other countries. The names of actual com-panies and products mentioned herein may be the trademarks of their respective owners. DisclaimerThe information contained in the User Guide is written for the M75 phone. Siemens reserves the right to make changes and improvements to the products and any of the features of the products described in this doc-ument without prior notice. The con-tents of the user guide are provided "AS IS". Except as required by appli-cable law, no warranties of any kind, either express or implied, including, but not limited to, the implied war-ranties of merchantability and fit-ness for a particular purpose, are made in relation to the accuracy, reliability or contents of this docu-ment. Siemens reserves the right to revise the user guide or withdraw it at any time without prior notice. Un-der no circumstances shall Siemens be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.Export InformationThe mobile phone may be subject to export regulation of the United States and other countries. Diversion contrary to law is prohibited. You must comply with all applicable export laws, restrictions and regula-tions of the United States foreign agencies or authorities, and may not export, or transfer for the purpose of re-export, the mobile phone or any part of the phone in violation of any applicable restrictions, laws or regu-lations, or without all necessary approvals.
Legal notices4© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_LegalNotices.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (4) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:04)Network ServicesA number of features included in this guide are called Network Services. They are special services provided by wireless service providers. In or-der to use any of these Network Services, you must subscribe to these service(s) from your service provider and obtain instructions for their use. Some of these Network Services may not be available when roaming on a network other than your home network.Standby andTalk Time InformationThe mobile phone incorporates fea-tures that are new to the mobile phone world. These may include col-or displays and lighting, graphic games, music reproduction and browsing the Internet. The way you use the display and the features will affect the performance of the bat-tery and how long it lasts between charge cycles. The quoted standby times and talk times show the mini-mum and maximum performance that can be expected from the bat-tery under normal network condi-tions and with the default settings as set by the factory. However, playing games (particularly with the back-light continuously switched on) and listening to music will shorten the time available for standby and to make and receive telephone calls. Operation times also vary depending on network conditions, SIM settings, charging and battery condition, how you use your phone and other factors. MemoryThe mobile phone contains an inter-nal memory device that stores the software required to operate the mobile phone, communicate with the GSM/GPRS network and provide the user interface. Some features in the internal memory run additional devices and some additional games and utilities. The amount of memory available in the mobile phone is fi-nite and may be insufficient to store large numbers of applications and files. Warning!Remember to back up your data and to do so frequently. Always back up all data and programs before sending the mobile phone in for repair.
5Safety precautions© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (5) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Safety precautionsInformation for parentsPlease read the operating instructions and safety precautions carefully before use.Explain the content and the hazards associated with using the phone to your children.Remember to comply with legal requirements and local restric-tions when using the phone. For example in aeroplanes, petrol stations, hospitals or while driving.Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Keep at least 20 cm/9 inches between phone and pacemaker. When using the mobile phone hold it to the ear which is further away from the pacemaker. For more infor-mation consult your doctor.Small parts such as the SIM card, sealing stop, lens ring and lens cap can be dismantled and swallowed by small children. The phone must therefore be stored out of the reach of small children.Do not use an optical magnifier to look at the activated infrared interface [Class 1 LED product (classification as per IEC 60825-1)].The mains voltage specified on the power supply unit (V) must not be exceeded. Otherwise the charging device may be destroyed.The power supply must be plugged into an easily accessi-ble AC mains power socket when charging the battery. The only way to turn off the charging device after charging the bat-tery is to unplug it. The ringtones (p. 87), message tones (p. 91) and handsfree (p. 32) talking are reproduced through the loudspeaker. Do not hold the phone to your ear when it rings or when you have switched on the handsfree func-tion (p. 32). Otherwise you risk serious permanent damage to your hearing.Only use original Siemens bat-teries (100% mercury-free) and -charging devices. Otherwise you risk serious damage to health and property. The bat-tery could explode, for instance.
Safety precautions6© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (6) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Bluetooth®Your phone has a Bluetooth interface. This makes it possible to establish a wireless connection of your phone with a headset of a car kit, or with other Bluetooth-enabled devices.In order to establish a secure link between the devices and to prevent a third party from having access to your phone, you should ob-serve the following points:• The initial connection between two devic-es, what is called "pairing", should take place in familiar surroundings. • Both devices must be able to identify themselves one time by using a password/PIN. To ensure sufficient security, you should choose a 16-digit number combina-tion for a password that would be difficult to guess (if a PIN has not been assigned).• An automatic connection acceptance ("connection without confirmation") should only be used in exceptional cases. • In general, only trustworthy devices should be linked in order to minimize security risks. • The name of your phone is transmitted in a Bluetooth connection. The factory de-fault is the "Bluetooth ID". The first time Bluetooth is activated, or later in the Bluetooth menu, you can change this name (My BT name (p. 97)).• If Bluetooth is not needed, this function should be deactivated.Before using Bluetooth accessories, or a mobile phone inside a vehicle, check the vehicle user guide for any limitations on the use of these products. You may only open the phone to replace the battery (100% mercury-free) or SIM card. You must not open the battery under any circumstances. All other changes to this device are strictly prohibited and will invali-date the guarantee.Please dispose of unwanted batteries and phones as permit-ted by the laws in your country.The phone may cause interfer-ence in the vicinity of TV sets, radios and PCs.Use only Siemens original ac-cessories. This will avoid poten-tial risks to health or property and ensure compliance with all relevant regulations.Improper use will invalidate the guarantee! These safety instructions also apply to Siemens original accessories.Product attributes are subject to changes in technology, design and availability. Siemens reserves the right to modify prod-ucts without prior notice.Improved data transmission In order for your phone to be able to trans-mit data at higher speeds, it is necessary to have a good connection to the network. Transmitting data can be delayed by the process of establishing a connection. To comply with guidelines on the effects of radio waves, you should keep the phone a distance of 0.59 inches (1.5 cm) from your body while transmitting data.
7Safety precautions© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (7) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Antenna careUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attach-ments could damage the phone and may violate FCC regulations.Phone operationNormal positionHold the phone as you would any other telephone with the antenna pointed up and over your shoulder.Tips on efficient operationFor your phone to operate most efficiently:• Extend your antenna fully (if applicable).• Do not touch the antenna unnec-essarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.PoC operationDepending on the service options of-fered by your service provider, you may be able to use the M75 phone as a two-way radio (push-and-talk over cellular "PoC" mode). In order to maintain compliance with FCC RF ex-posure guidelines while using the M75 phone in PoC mode, the phone must be held in a vertical position at least one inch (2.5 cm) from the lips.DrivingLaws pertaining to the use of mobile phones while driving vary signifi-cantly from state to state and some-times even from locality to locality within states. For example, some ar-eas may allow persons to use their mobile phones only if they employ a hands-free device, and some areas may prohibit the use of cell phones entirely. Accordingly, Siemens rec-ommends that persons check the laws for the areas in which they drive or will be driving. For areas where the use of mobile phones while driv-ing is permitted, Siemens encourag-es persons to use their phones re-sponsibly and to employ hands-free devices. Also, if using your phone while driving, please:• Give full attention to driving – driving safely is your first responsibility;• Use hands-free operation;ImportantRead this information before using your wireless handheld phone.As this mobile phone is equipped with a fixed (non-retractable) an-tenna, some paragraphs in the text below may not be applicable.
Safety precautions8© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (8) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)• Pull off the road and park before making or answering a call, if driving conditions so require.For vehicles equipped with air bagsAn air bag inflates with great force. DO NOT place objects, including ei-ther installed or portable wireless equipment, in the area over the air bag or in the air bag deployment ar-ea. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.PacemakersThe Health Industry Manufacturers' Association recommends that a min-imum separation of 6 inches (21 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommenda-tions are consistent with the inde-pendent research by and recommen-dations of Wireless Technology Research.Persons with pacemakers• should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;• should not carry the phone in a breast pocket;• should use the ear opposite the pacemaker to minimize the poten-tial for interference;• should turn the phone OFF imme-diately if there is any reason to suspect that interference is taking place.Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider or your hearing aid manu-facturer to discuss alternatives.Other medical devicesIf you use any other personal medi-cal devices, consult the manufactur-ers of your devices to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtain-ing this information.Turn your phone OFF in health care facilities when any regulations post-ed in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
9Safety precautions© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (9) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehi-cle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted facilitiesTurn your phone OFF in any facility where posted notices so require.AirplanesFCC and Airline Regulations prohibit using your phone while in the air. Turn your phone OFF when request-ed by the airline.Check and comply with the policy of your airline regarding the use of your phone while the airplane is on the ground.Blasting areasTo avoid interfering with blasting op-erations, turn your phone OFF when in a “blasting area” or in areas post-ed: “Turn off two-way radio”. Obey all signs and instructions.Potentially explosive atmospheresTurn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive at-mosphere are often but not always clearly marked. They include: fueling areas such as gasoline stations; be-low deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or parti-cles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.Emergency calls (SOS)Your wireless phone can be used to make emergency calls. You can make an emergency call from the main display screen. Enter the local emergency number such as 911 and then press the A key.
Safety precautions10© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (10) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)This phone, like any wireless phone, operates using radio signals, wire-less and landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential commu-nications (for example, medical emergencies). Remember – to make or receive any calls, the phone must be switched on and be used in a ser-vice area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network services or phone features are in use. Check with local service providers re-garding their network features. Always make certain that your phone is properly charged before attempting any emergency calls. If you allow your battery to discharge, you will be unable to receive or make calls, including emergency calls. You must then wait a few minutes after the charging begins to place any emergency calls.When making an emergency call, remember to give all of the neces-sary information as accurately as possible. Remember that your wire-less phone might be the only means of communication at the scene of an accident, therefore you should not terminate the call until given permis-sion to do so.Batteries and ChargersOnly use original Siemens batteries (100% mercury-free) and charging devices. Use of non-Siemens batter-ies and/or charging devices may cause explosion resulting in serious injury and/or property damage. Use original Siemens accessories in order to avoid possible injury and property damage and to ensure compliance with applicable laws and regula-tions. Improper use invalidates the warranty.Battery safety precautionsTo reduce the risk of fire, injury or electric shock, and to properly dis-pose of batteries, please read and understand the following instruc-tions. CONTAINS LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE IN MUNICIPAL WASTE.1. Only use the batteries specified for use with this mobile phone.2. Do not use batteries of different sizes or from different manufac-turers in this mobile phone.3. Do not dispose of the battery in a fire; it may explode. Dispose of used batteries and phones in accordance with applicable laws and safety regulations. Do not expose battery to water. Check with local codes for special dis-posal instructions.
11Safety precautions© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (11) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)4. Do not open or mutilate the bat-tery. Doing so may cause damage to the eyes or skin.5. Exercise care in handling the bat-tery in order not to short the bat-tery with conducting materials such as rings, bracelets, and keys. The battery or conducting mate-rial may overheat and cause burns or fire.6. Charge the battery provided with, or identified for use with, this product only in accordance with the instructions and limitations specified in the User's Guide. Do not attempt to charge the battery by any means other than those specified in the User's Guide.
Overview of phone12© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Overview.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (12) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Overview of phone1 A Call keyDial displayed/highlighted phone num-bers/names, take calls. In standby mode, show last phone numbers dialled. 2 B On/Off/End key• Switched off: press and hold to switch on.• During a conversation or in an appli-cation: press briefly to finish. • In menus: press briefly to go back a level. Press and hold to return to standby mode.• In standby mode: press and hold to switch off phone.3 JoystickC Press the joystick down vertical-ly to start an application or func-tion. The current function is displayed between the softkeys (p. 21).In standby modeC Open main menu.G Open user profiles.H Open Phonebook/ Addressbook.E Open Main Inbox.D Start the camera.In lists, messages and menusI Scroll up and down.D Back one level.During a callI Set volume.E Call options. 4 < > SoftkeysThe current functions of this key are shown in the bottom line of the displays as §Text§/symbol (e.g. p).5 InternetAccess to the Internet portal.Z £  XService provider01.05.2005 10:10Inbox í New SMS
13Overview of phone© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Overview.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (13) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)1 Integrated antennaDo not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality.2 Loudspeaker3 Sidekeysa Camera• Press in standby mode: Start the camera.• During a call: Decrease volume.b PoC•Press in standby mode: Start PoC.• During a call: Increase volume.4 Display5 Infrared interface (IrDA)6 * Ringtone• Press and hold in standby mode: switch acoustic signals on/off (except for alarm clock). • Press and hold when incoming call is received: switch off ringtone for this call only.7 # Key lockPress and hold in standby mode or when playing a music file: Switch key lock on/off.8 Connection socketFor charger, headset, flash, etc.9  Slot for RS MultiMediaCard:  Car kit holder!  Connection for external antenna" Camera lens§ MirrorZ £  XService provider01.05.2005 10:10Inbox í New SMS
Display symbols14© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Displaysymbols.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (14) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Display symbolsDisplay symbols (selection)Z Strength of receiving signalY ChargingW Battery charge level, e.g. 50%L PhonebookP Call recordsO Surf & fun/Service provider portalQ OrganizerM MessagesR CameraS ExtrasN My stuffT SettingsÇ All calls are diverted¿ Ringer (beep) off¾ Short ring (beep) only¼ Ringtone only if the caller is stored in the Phonebook¹ Alarm setÄ Keypad lockedÅ Auto answer feature on£ Activated and available¢ Registered¤ Temporarily interrupted± Internet offline² Internet online³ Internet via GPRS online´ Internet no network¯ IrDA activated® IrDA transmission¨ Bluetooth activatedª Bluetooth transmissionEvents (selection)ã SMS memory fullä MMS memory fullå Phone memory fullÆ No network access Missed callÊ Memory assistant
15Display symbols© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Displaysymbols.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (15) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Message symbols (selection)p Unreadq Readr Drafts Sentt MMS not sentw MMS notification receivedx MMS notification ready MMS with DRM contents (p. 20)z E-mail forwarded{ E-mail with attachmentÀ Voice mail receivedCamera symbolsÈ Switch to photo modeÉ Switch to video modeÙ BrightnessÚ Zoom factorÛ White balance× Flash connected
Getting started16© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (16) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Getting startedThe phone is packaged in dismantled form and must be re-assembled prior to using for the first time. In rare cases, static discharge may cause discolouration at the edges of the display. However, this will disap-pear within approx. 10 minutes.Insert SIM card/batteryThe service provider supplies you with a SIM card on which all the im-portant data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.• Place the SIM card flat in front of the slot with the contact surface facing downwards. Then push the SIM card in using gentle pres-sure 1 (ensure that the cham-fered corner is in the correct position). • To remove the SIM card push the latch downwards 2 and pull out the SIM card in shown direction 3. Please do not use any tools.• Insert the battery sideways into the phone 4, then press it down-wards 5 until it clicks into position. • To remove the battery, pull it out with the retaining tab on the side.Your phone's display is sup-plied with a protective film. Remove this film slowly be-fore assem-bling the phone.31245
17Getting started© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (17) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)• Place the cover in position and push it towards the front 6.• Close the cover by turning the locking catch ninety degrees clockwise 7. Inserting anRS MultiMediaCardWhen delivered, the RS MultiMedia-Card is not yet in the phone. • To insert the RS MultiMediaCard, gently push the card right in until it clicks into place 1.• If necessary, use the plug 2.•Before removing the RS MultiMedia-Card, carry out the Eject card func-tion in the My stuff options menu. This prevents any possible data loss.• To remove the RS MultiMedia-Card, open the cover and press the card briefly (if necessary, use the plug). The card will pop out a little and you can remove it. Finally, close the cover again.Additional informationPlease switch off your phone before re-moving the battery!The phone supports 1.8 V and 3 V SIM cards. Please contact your service provider if you have an older card.6712
Getting started18© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (18) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Charge batteryCharging procedureThe battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours. YDisplay during charging.Charging timeAn empty battery is fully charged af-ter about 2 hours. Charging is only possible within a temperature range of +5 °C to 45 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded. Operating timesThe operating time depends upon the respective conditions of use. Ex-treme temperatures considerably re-duce the phone’s standby time. Avoid placing the phone in the sun or on a heater.Talktime: up to 300 minutes Standby time: up to 250 hoursCharge icon not visibleIf the battery has been discharged fully, the charge icon is not immedi-ately visible when the power supply is plugged in. It will appear after up to two hours. In this case, the battery is fully charged after 3 to 4 hours.Only use the plug-in power supply unit included in delivery!Display while in serviceCharge level display during opera-tion (empty – full):V W X A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly af-ter an uninterrupted charging/dis-charging cycle. Therefore do not re-move the battery unnecessarily, and where possible, do not end the charging process prematurely. Additional informationThe power supply unit heats up when used for long periods. This is normal and not dangerous.If the battery is removed for longer than 30 seconds, the clock must be reset.
19Switch on/off, PIN entry© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (19) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Switch on/off, PIN entrySwitching phone on/offBPress and hold the On/Off/End key.Entering the PINThe SIM card can be protected with a4to 8-digit PIN.JEnter the PIN using the number keys. The charac-ters **** appear to en-sure nobody can read your PIN on the display. Correct with]. CConfirm. Logging on to the network will take a few seconds.Emergency number (SOS)Only to be used in real emergencies!By pressing the §SOS§ softkey you can make an emergency call on any net-work without a SIM card and without entering a PIN (not available in all countries).Switching your phone on for the first timeTime/dateSet the clock correctly on a one-off basis when getting started.CPress this key, then select §Change§.JFirst enter the date (day/month/year), then the time (24 hours, including seconds).CPress. The time and date are updated.Time zonesSet the time zone for your area.ISelect the city in the de-sired time zone from the list ...§Set§ ... and set it.Copy SIM addressesThe first time the SIM card is insert-ed, the entries on it can be copied to the Addressbook. Please do not inter-rupt this procedure. During this time, do not accept incoming calls. Follow the instructions in the display.You can also copy data from the SIM card at a later time (p. 43).Additional informationChange PIN.......................................p. 24Clear SIM card barring ......................p. 25
General instructions20© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (20) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)General instructionsStandby modeThe phone is in standby mode and is ready for use when the name of the service provider appears on the display.BPress and hold the On/Off/End key to return to standby mode from any situation.Signal strengthZStrong receiving signal.[A weak signal reduces the voice quality, can cause the connection to be lost, and consumes more cur-rent. Change your location.Digital Rights Mgmt. (DRM)Remember that your phone has Digi-tal Rights Management. The use of downloaded pictures, sounds or ap-plications can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, the number of times it can be used etc. (see also p. 81).Main menuThe main menu is displayed graphi-cally with symbols:CCall main menu up from standby mode.F/ISelect the application symbols.CStart an application.Main menu options§Options§ Open menu.Different functions are available de-pending on the context.Large letters Select one of two font sizes.Illumination Set display illumination to brighter/darker.Eject card Allows the RS MultiMedia-Card to be removed without loss of data.
21General instructions© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (21) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)User guideMenu controlsThe steps needed to reach a function are shown in a condensed form in the user guide, e.g. to display record of dialled calls in condensed form:C¢P¢Calls dialedThis comprises the following steps:COpen main menu.GSelect P.CConfirm.HSelect Calls dialed function.CConfirm.SymbolsThe following symbols are used to explain operation:CPress joystickThe symbol in the centre of the low-er line of the display shows the cur-rent function when the joystick is pressed down vertically.í Display menuî Take photosï Zoomð  Call, accept callì OKñ/ ò  Play/Pause for sounds & videos.J Enter numbers or letters.B On/Off/End keyA Call key< > Softkeys§Menu§ Displays a softkey function.C Press vertically down on the joystick (to call up the menu, for example).D F E H I G Press the joystick in the direction indicated.= Function dependent on service provider. May re-quire special registration.
Standard functions22© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (22) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Standard functionsOption menusFunctions which appear repeatedly in the options menu are listed here.§Options§ Open menu.Edit Open the entry to edit.View Display entry.Delete/Delete all Delete entry/delete all entries after confirmation.New entry Create new entry.Send... Select transmission service and medium for sending or printing e.g. IrDA or Bluetooth.Reply/Reply to all The sender becomes the recipient, “Re:” is placed in front of the subject matter and the received text is transferred to the new message.Save Save entry.Save to 9Save recipients in the cur-rent address directory.Sort Set sort criteria (alphabeti-cal order, type, time).Text input (p. 26)T9 preferred: Activate/deactivate T9 input.Input language: Select language for text.Rename Rename selected entry.Capacity Display memory capacity.Properties Display properties of the highlighted object.Help Display help text.
23Standard functions© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (23) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Highlighting modeWith some applications (e.g. Phone-book/Addressbook), you can high-light one or more entries in a list in order to carry out a function jointly. §Options§ Open menu.Mark Activate highlighting mode. ISelect entry/entries.CHighlight or delete highlighting.§Mark§ The current entry is highlighted.§Unmark§ Unhighlight the current entry.Additional highlighting functions:§Options§ Open menu.Menu speed diallingAll menu functions are numbered in-ternally. A function may be selected directly by entering these numbers in sequence.E.g., to write new SMS (from stand-by mode):CPress to display the main menu. Then press5for Messages, then 1for Create new, then1for SMS.Mark all Highlight all entries.Deselect all Delete highlighting on all highlighted entries.Delete marked All highlighted entries are deleted.
Security24© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (24) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)SecurityThe phone and SIM card are protect-ed against misuse by several security codes.PIN codeC¢T¢Security¢PIN code¢Select function.PIN controlThe PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not per-mit deactivating the control.§Change§ Press.JEnter PIN.CConfirm entry.Change PINYou can change the PIN to any 4 to 8-digit number you find easier to remember.§Selection§ Press.JEnter current PIN.CPress.J, CEnter new PIN.J, CRepeat new PIN.Keep these security codes in a safe place where you can access them again if required. PIN Protects your SIM card (Personal Identification Number).PIN2 This is needed to set the charge detail display and to access ad-ditional functions on special SIM cards.PUKPUK2 Key code. Used to unlock SIM cards after the wrong PIN has been entered repeatedly.Phone code Protects your phone. Must be entered at the first security setting.
25Security© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (25) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)C¢T¢Security¢PIN code¢Select function.Change PIN2(Display only if PIN2 is available). Proceed as for Change PIN.Chg.phonecode(Change phone code)You define the phone code (4 to 8 digits) when you call up a phone-code protected function for the first time (e.g. Direct call, p. 34). It is then valid for all phone-code protected functions. Following the third unsuccessful at-tempt, access to the phone code and the functions that use it is denied. If this occurs, contact Siemens Service (p. 135).Clear SIM card barringIf the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN) provided by your service provider with the SIM card in accordance with the instruc-tions. If the PUK (MASTER PIN) has been lost, please contact your ser-vice provider.Preventing accidentalactivationEven if PIN control is deactivated (p. 24) confirmation is required to switch on the phone.This prevents accidental activation of the phone, e.g. when you are car-rying it in a bag or when you are trav-elling in an aircraft.BPress and hold. §OK§ Press. The phone switches on.§Cancel§ Press this key or take no action. The phone does not switch on.
Text entry26© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (26) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Text entryText entry without T9Press the number key repeatedly un-til the required character appears. After a brief interval the cursor will advance. Example:2Press once briefly to write the letter a, twice to write b etc.Press and hold to write the number.Ä, ä, 1–9 Unusual characters and numbers are displayed af-ter the relevant letters.]Press briefly to delete the letter before the cursor. Press and hold to erase the whole word.FMove the cursor (forwards/back).#Press briefly: Swap be-tween abc, Abc, T9abc, T9Abc, 123. Status shown in top line of display.Press and hold: all input-variants are displayed.*Press briefly: special char-acters are shown.Press and hold: open input menu.0Press once/repeatedly:. , ? ! ’ " 0 + - ( ) @ / : _ Press and hold: writes 0.1Writes blank. Press twice = line break.Special characters*Press briefly. The symbols chart is displayed:1) Line breakI, FNavigate to characters.CPress.1)¿¡_; . ,?!+-"’ :*/()¤¥$£€@\&#[]{}%~<=>|^`§ Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω
27Text entry© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (27) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Input menuFor text input:*Press and hold. The input menu is displayed:Text format (SMS only)Input language Mark Copy/Insert Text entry with T9“T9” deduces the correct word from the individual key entries by making comparisons with an extensive dictionary.Activate, deactivate T9§Options§ Open text menu.T9 input Select.§Change§ Activate T9.Select input languageSelect the language in which you want to compose your message.§Options§ Open text menu.Input languageSelect.ISelect language.§Selection§ Confirm. The new lan-guage is set. Languages with T9 support are marked with the T9 symbol. Writing with T9The display changes as you proceed.It is therefore best if you finish a word without looking at the display.Simply press the keys once where the relevant letter is located. For “hotel”, for example:#Press briefly for T9Abc then46835 1A blank ends a word.Do not use special characters such as Ä. Use standard characters instead, e.g. A; T9 will do the rest for you.T9® Text Input is licensed under one or more of the following:U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928 and 6,011,554;Canadian Pat. No. 1,331,057;United Kingdom Pat. No. 2238414B;Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383;Euro.Pat. No. 0 842 463 (96927260.8)DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;and additional patents are pending worldwide.
Text entry28© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (28) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)T9 word suggestionsIf several options are found in the dictionary for a key sequence (a word), the most probable is dis-played first. If the word you want has not been recognised, the next sug-gestion from T9 may be correct.The word must be shown §highlighted§. Then press^Press. The displayed word is replaced with a differ-ent word. If this word is al-so incorrect, press again.^Press. Repeat until the correct word is displayed.If the word you want is not in the dic-tionary, it can also be written with-out T9.To add a word to the dictionary:§Learn§ Select.The last suggestion is deleted and the word may now be entered with-out T9 support. Press §Save§ to add it automatically to the dictionary.Correct a wordFMove left or right, word by word, until the re-quired word is §highlighted§.^Scroll through the T9 word suggestions again.]Deletes the character to the left of the cursor and displays a new possible word.Additional informationWithin a “T9 word“, individual letters may not be edited without first removing the T9 status. In most cases it is better to rewrite the complete word.0Set a full stop. The word is concluded if it is followed by a space. Within a word, a full stop represents an apostro-phe or hyphen:e.g. §provider.s§ = provider’s.EMoving the cursor to the right ends the word.#Press briefly: switch be-tween: abc, Abc, T9abc, T9Abc, 123. Status shown in top line of display.Press and hold: all input vari-ants are displayed.*Press briefly: select special characters (p. 26).Press and hold: opens input menu (p. 27).
29Text entry© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (29) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Text modulesText modules can be stored in the phone for adding to your messages (SMS, MMS, e-mail). Write text modulesC¢M¢Text modules<New entry>Select.CThe input field is opened.JWrite text.§Options§ Open menu and select Save. Accept the suggest-ed name or allocate a new one.CSave.Use text modulesJWrite message (SMS, MMS, e-mail).§Options§ Open text menu.Insert from Select.ISelect Text module. ISelect text module from the list.§Selection§ Confirm. The text module is displayed.CConfirm. The text module is inserted in the message to the right of the cursor.
Calling30© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (30) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)CallingDialling with number keysThe phone must be switched on (standby mode).JEnter the number (always with area/international dialling code). ] A short press clears the last digit, a long press clears the entire phone number.APress the Call key. The dis-played phone number is dialled.End callBPress the End key briefly. Press this key even if the person on the other end of the line has hung up first.Set volumeIt is only possible to adjust the vol-ume during a call.IWith the joystick or with the sidekeys.If a car kit is used, its volume setting will not affect the usual setting on the phone.Redial previous numbersTo redial the phone number last called:APress the Call key twice.To redial other numbers that were dialled previously:APress the Call key once.IPick out the phone num-ber from the list, then to dial press the …A... key.
31Calling© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (31) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)If the number is busyIf the called number is busy or can-not be reached because of network problems several options are avail-able (depending on the service pro-vider). An incoming call or any other use of the phone interrupts these functions.EitherAuto. redial§Auto dial§ The phone number is automatically dialled ten times at increasing time intervals. End with:B End key.Or Call back b§Call back§ Your phone rings when the busy number is free. Press the Call key to dial the number. Reminder§Prompt§ A beep reminds you to re-dial the displayed phone number after 15 minutes.Additional informationÐStore phone number in the Addressbook/Phonebook.§Handsfr.§ Switch on Handsfree (play-back from loudspeaker).*Press and hold to switch microphone off.International dialling codes0Press and hold until a “+” is displayed.§Country§ Press and select country.Phone number memoYou can enter a phone number during the call. The person to whom you are speaking can hear these entries. When the connec-tion has ended you can save or dial the phone number.
Calling32© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (32) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Accept callThe phone must be switched on. An incoming call will interrupt any other use of the phone.CPress.Or APress.A phone number transmitted by the network plus the corresponding name (possibly with a picture) are displayed if they are stored in the Phonebook/Addressbook (p. 39).Reject call§Reject§ Press.Or B Press briefly.HandsfreeYou can put the phone down during a call. You can then hear the caller via the loudspeaker. §Handsfr.§ Activate handsfree talking.CSwitch on.IRegulate the volume with the joystick.§Handsfr.§ Deactivate.Swap between 2 calls bEstablish a second connectionYou can call another number during a call.COpen call menu.Hold The current call is put on hold. JNow dial the new phone number or selectC Open the call menu, then select Default book, and then select the phone number.When the new connection is established:§Toggle§ Swap between calls.Warning!Please make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.Additional information*Press and hold to switch off the ringtone and silent alert.ÂMissed call display.Warning!Always switch off “handsfree talking” before holding the phone to your ear! Otherwise, you will damage your hearing!
33Calling© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (33) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Incoming calls during a callYou may need to register for this ser-vice with your service provider and set your phone accordingly (p. 89). Dur-ing a call, you may be advised that there is another call waiting. You will hear a special tone during the call. You have the following options:•Accept the waiting call in addition to the first §Toggle§ Accept the waiting call, putting the current call on hold to do so. Always proceed as above to swap be-tween the two calls.•Reject the waiting call §Reject§ Press. Or §Forward§ The waiting call is divert-ed, for example, to the mailbox.•Accept the waiting call and end the current call BEnd the current call.CAccept new call.End call(s)BPress the End key. After the Return to held call? display, you have the following selection:§Yes§ You accept the call on hold.§No§ You end the second call too.Conference b Call up to 5 parties one by one and link them together in a multiparty call. Some of the functions described may not be supported by your ser-vice provider or may have to be en-abled specially. A connection has already been established: COpen the call menu and select Hold. The current connection is maintained.JNow dial a new number. When the new connec-tion is established ...C... Open the call menu and select Conference. The held call is joined.Repeat procedure until all partici-pants are linked together (up to 5participants).
Calling34© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (34) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)EndBAll calls in the conference are ended when you press the End key. Call optionsThe following functions are only available during a call:CPress. Direct callIf this is active, only one number can be dialled.Switch onC¢T¢Security¢Direct callCConfirm selection.JEnter phone code.When first prompted you define and enter the phone code (4 to 8 digits).CConfirm selection.Please do not forget this code (p. 24)! Ï/JSelect phone number from the Phonebook/Addressbook or enter it. CConfirm.Hold Hold current call.Microphone on If switched off, the person on the other end of the line cannot hear you (muting). Also: * Press and hold.Handsfree Playback through the loudspeaker. Volume Adjust handset volume.Default book Phonebook/Addressbook.Conference (p. 33)Time/charges Display talktime that has elapsed so far and (if set) charges incurred during the connection (p. 46).Send DTMF Enter tone sequences (numbers) for remote in-quiries to an answering machine.Call transfer = Connect the original call to a second call. For you, both calls are now ended.Main menu Access to the main menu.Call status List all held and active calls (e.g. participants in a con-ference).
35Calling© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (35) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Apply§Carola§ To dial the phone number (e.g. Carola’s phone num-ber), press and hold the right softkey. Switch off#Press and hold.JEnter phone code.CConfirm input.Tone sequences (DTMF)You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists. These entries are transmitted directly as DTMF codes (control codes).COpen the call menu.Send DTMFSelect.Using the Phonebook/AddressbookStore phone numbers and control codes (DTMF codes) in the Phone-book/Addressbook in the same way as a normal entry.JEnter phone number.0Press until a “+” appears in the display (wait for the connection to be established).JEnter DTMF codes (numbers).0If necessary, wait again for three seconds at a time for the receiver to process the entries safely.JEnter a name.§Save§ Store entry.You may also store just the DTMFcodes (numbers) and then send them during the call.
My items36© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyPhone.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (36) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)My itemsSet your phone as you wish for the following items:Ringtones (p. 87)Assign individual ringtones to caller groups or special dates.Pictures (p. 128)Assign individual pictures or photos to your Addressbook entries.Animations (p. 86)Choose a start up and shut down animation as well as a personal greeting.Themes (p. 84)Load a completely new visual pre-sentation onto your phone.Screensaver (p. 85)Choose an analogue or digital clock, or a personal picture.(Operator) Logo (p. 85)Choose an individual picture (to be displayed in standby mode)Wallpaper (p. 85)Choose your own permanent back-ground image.Colour skin (p. 85)Select a colour skin for the user interface.Applications (p. 80)Download your own applications from the Internet.Where do I get what?You can purchase additional ring-tones, logos, animations and Java applications from your service pro-vider or directly from Siemens.Service provider portalDepending on your service provider, you will find direct access to his por-tal on your telephone via menu items or bookmarks. Please contact your service provider for more infor-mation on these services.Siemens Mobile PortalYou will find additional ringtones, logos, animations and screensavers as well as more applications, games and services on the Internet at:www.siemens.com/mobilephonesor you can download them directly from the Internet:wap.siemens-mobile.com You will also find a service for saving data here as well as a list of the coun-tries in which these services are available.My menuCreate your own menu (p. 105) with frequently used functions, phone numbers or Internet pages.
37Default book© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Pref_Book.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (37) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Default book C¢L¢Select function.Show entriesThe entries in the default book (Addressbook or Phonebook) are shown.J/ISelect a name with the first letter and/or scroll. New entryCreate new entry.Address book (see also p. 38)Phonebook (see also p. 42)Default bookYou can set which directory you pre-fer to use. The selected default book is opened in standby mode with the joystick.HOpen Phonebook or AddressbookAddress bookA lot of data can be saved in the Addressbook for each entry and ad-ditional functions (e.g., Birthday:, Picture:, Chat room) can be used.PhonebookThe Phonebook is located on the SIM card. Only one phone number can be entered per entry. The Phonebook on the SIM card can easily be trans-ferred into a different phone.Business cardCreate your own business card to send to a different GSM-phone. If no business card has been created yet, you will be asked for your input.HMove from field to field to enter your details. §Save§ Press.GroupsSee p. 41.<Info numbers>See p. 44.Additional informationThe content of the business card corre-sponds to international standards (vCard).ÏCopy numbers from Address-book/Phonebook.
Address book38© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (38) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Address bookThe Addressbook can store up to 1,000 entries, each with a variety of phone and fax numbers as well as additional address details. These en-tries are managed in the phone memory separately from those in the Phonebook. However, you can ex-change data between the Address-book and the Phonebook on the SIM card.New entryThe Addressbook is set as standard:HOpen Addressbook (in standby mode).CDisplay input fields.ISelect required input fields.JFill in input fields. The maximum number of characters available is shown at the top of the display. At least one name must be entered. Always enter phone number with dialling code. Possible input fieldsAdditional informationGroup: Allocation to a group (p. 41).Address: Extension to enter the complete address:Street:, ZIP:, City:, Country: Com. servicesInformation if the entry is being used as an Inst. Mes-sage contact (p. 69) or for Walky Talky:Nickname:, Push to talk ID:, Push to talk type:, WV user ID:, ICQ number:, AIM screen name: Last name: URL:First name: Chat room >> Phone number: Group:Phone no./office: Company:Phone no./cell: Address: >> Fax: Birthday: >> Fax #2: Picture:E-mail:Email #2: All fields
39Address book© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (39) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Birthday: After activation, the date of birth is entered. Reminder: The phone re-minds you at the time you set one day before the birthday.Picture: Assign a picture to the en-try. This is displayed when you are called by a corre-sponding phone number.All fields/Reduced fieldsDisplays the number of input fields.§Save§ Save the entry.Display/find entryHOpen Addressbook (in standby mode).J/ISelect a name with the first letter and/or scroll.CDisplay.Display options§Options§ The options menu only ever offers the functions for the currently selected input field.Additional informationÎTemporary switch to Phonebook.SynchronisationWith the mobile phone manager (p. 130) you can synchronise your Addressbook with Outlook®, Lotus Notes™ and other Siemens phones. Using Remote sync. you can synchronise your mobile with an organiser stored on the Internet (see also p. 125).Move to ... Assign current entry or highlighted entries to a group.View Display an assigned picture.Copy to SIM Copy name and one phone number to the SIM card (Phonebook).New SMS, New MMS, New e-mailCreate a message with the selected entry.Browser  Start browser and visit URL.Inst. Msg. Start a dialogue with the selected entry (p. 69).(For standard functions see p. 22)
Address book40© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (40) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Change entryHOpen Addressbook (in standby mode).ISelect required entry.§Edit§ Press.ISelect input field.§Edit§ Open entry. JMake changes.§Save§ Save.Call entryHOpen Addressbook (in standby mode).J/ISelect a name with the first letter and/or scroll. AThe number is dialled.If there are several numbers in the Addressbook entry, these are of-fered for selection.ISelect phone number.AThe number is dialled.Addressbook optionsDepending on the actual situation, different functions will be offered. These functions can be applied to the entry currently selected as well as to multiple selected entries:§Options§ Open menu. Move to ... Assign current or highlight-ed entries to a group.Copy to SIM Copy name and phone number to the SIM card (Phonebook).Filter Only those entries which match the filter criteria are displayed.Import Set up readiness to receive for a Phonebook entry via IrDA (p. 94) or SMS (p. 51).Search Enter search term.(For standard functions see p. 22)
41Address book© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (41) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)GroupsNine groups are specified in your phone to enable you to arrange your Addressbook entries clearly. You can rename seven groups.HOpen Addressbook (in standby mode).<Groups> Select (the number of entries is listed after the group name). ISelect group. CList entries in the group for viewing and editing.Groups menu§Options§ Open menu.Ringtone for groupAssign a ringtone to a group that plays when one of its members calls you. C¢T¢Ring tones¢Group callsISelect group.CConfirm. If a ringtone has already been set, it will be played. Otherwise, the ringtone list will be dis-played and you can select one.I If necessary, select a ringtone.CConfirm. Rename Change name of group.Group symbol Assign a symbol to a group. The symbol will then appear in the display when one of the group members calls.Additional informationNo group: Contains all Addressbook entries that do not belong to a group (name cannot be changed).Received: Contains Addressbook entries received by IrDA (p. 94), Bluetooth (p. 95) or SMS (p. 51) (name cannot be changed).
Phonebook42© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phonebook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (42) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)PhonebookEntries in the Phonebook (on the SIM card) are managed separately from those in the Addressbook. You can, however, exchange data between the Phonebook and the Addressbook.New entryIf the Phonebook has been selected as the default book:HOpen Phonebook (in standby mode).<New entry>Select.CDisplay input fields.ISelect input field.JFill in input fields. The maximum number of characters available is shown at the top of the display. Number: Always enter phone number with dialling code. An entry will not be saved without a phone number.Name: Enter first and/or last names.Group:Default: No groupImportant phone numbers can be put in one group (VIP). This group is independent from groups in the Addressbook.Location: Default: SIMSpecial SIM cards can save phone numbers in a protected area (SIM pro-tected) (PIN2 required).Record #: Each entry is automatically assigned a record number. You can also dial using the record number. §Save§ Press to store the new entry.Additional informationÎTemporary switch to Address-book.§Country§ International dialling code...p. 31Functions concerning Text entry.........p. 26
43Phonebook© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phonebook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (43) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Call (search for an entry)HOpen Phonebook.J/ISelect a name with the first letter and/or scroll.APhone number is dialled.Call using record no.A record number is automatically as-signed to every new entry in the Phonebook.JEnter record number.#Press.APress.Change entryISelect entry in Phonebook.§Edit§ Press.ISelect desired input field.JMake changes.§Save§ Press.Phonebook optionsThe following functions are avail-able, depending on the current situation. §Options§ Open menu.Copy to 9Copy all highlighted entries to the Address-book.Copy all to 9Copy all entries to the Addressbook.Delete all The whole Phonebook is deleted (PIN-protect-ed).Import Set up readiness to re-ceive for a Phonebook entry via IrDA (p. 94) or SMS (p. 51).(For standard functions see p. 22)
Phonebook44© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phonebook.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (44) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)<Special books>HOpen Phonebook (in standby mode).<Special books>Select.<Own numbers>Enter “own” phone numbers in Phone-book (e.g., fax) for information. These numbers can be changed, deleted and also sent as an SMS message.<VIP numbers>Display the phone numbers saved in the VIP group.<SIM phonebook> Entries stored in the Phonebook on the SIM card can also be used on oth-er GSM phones.<Protected SIM>  bOn special SIM cards, phone num-bers can be stored in a protected lo-cation. PIN2 is required for editing. <Service nos.>/<Info numbers>There might be phone numbers saved in your Phonebook that have been provided by your service pro-vider. They may be used to call local or national information services or to use services offered by your service provider.Completing phone numbers in the PhonebookDigits may be replaced by a “?” when phone numbers are entered in the Phonebook:#Press and hold.These wildcards must be replaced with numbers before dialling (e.g., with the ex-tension numbers in a phone system). To make a call, select the phone number from the Phonebook.APress.JReplace “?” with numbers.AThe phone number is dialled.
45Call records© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Records.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (45) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Call recordsThe phone number of a caller is dis-played if• the caller has switched off the Hide ID function and• the network supports the “Caller Identity” function.Alternatively, a caller’s name is dis-played if it is stored in the Phone-book/Addressbook.Your phone stores the phone numbers of calls for convenient redialling. C¢P ISelect record.COpen call record.ISelect phone number.ADial phone number.Or§View§ Display information on the phone number.Up to 500 entries are stored in the records:Missed calls  bThe phone numbers of calls that you have received but not answered are stored for call back purposes.ÂSymbol for missed call (in standby mode). Press the softkey beneath the symbol to bring up the Main Inbox (p. 50). Calls received Accepted calls are listed. Calls dialed Access to the last numbers you have dialled.AFast access in standby mode.Delete records The records are deleted. Records menuThe records menu can be called up if an entry is highlighted.§Options§ Open menu.Copy to 9Copy the currently select-ed phone number into the preferred directory.(For standard functions see p. 22)
Dur./charges46© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_TimeCharge.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (46) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Dur./chargesYou can display the charges and du-ration during a call. You can set a unit limit for outgoing calls. C¢P¢Dur./chargesSelect:Last call All outg. calls All incom.calls Remain. units Charge setting IScroll through the display.COpen item.§Reset§ Reset the currently select-ed setting.Charge settingCOpen menu.CurrencyEnter desired currency.Charge/Unit (PIN2 prompt)Enter the currency as well as the charge per unit and time.Account limit (PIN2 prompt)Special SIM cards allow you or the service provider to define a credit limit or a period after which the phone is barred for outgoing calls.§Edit§ Press.JEnter PIN2.Account limitSwitch on.JEnter number of units.§OK§ Confirm.Then confirm the credit or reset the counter. The status display for pre-paid cards may vary depending on the service provider.Auto displayCall duration and charges are displayed automatically.
47Camera© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Camera.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (47) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)CameraYou can view photos/videos record-ed on the integrated camera imme-diately and• use the photo as a background image, logo, a start-up/shutdown animation or a screensaver;• assign the photo to an Address-book entry;• send the photo/video via MMS or e-mail;• save the photo in My stuff (p. 128) or on the RS MultiMediaCard (p. 129).Switch onC¢R Or aPressing the sidekey to start the camera in stand-by mode.ÈSwitch to single image.Éand video recording.The current (preview) image is dis-played. You will see the following in the first line from left to right:ÙBrightnessÚZoom factorÛWhite balance (p. 49)×Flash connectedThe number of photos which can still be taken in the selected resolution is displayed in the top right-hand cor-ner of the preview image. This number varies considerably depend-ing on the subject matter and how much storage space is required. The selected resolution is indicated beneath the preview image or, if video mode has been selected, there is an indication as to how much re-cording time has already been used and how much time is still available for a video.èCameraÙÚ  ×PremiumÉ î Options
Camera48© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Camera.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (48) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Photo modeCTake a photo.CDisplay the preview im-age for the next photo.The photo is saved with a name, the date and the time. To enter the name, see Settings in the options menu.Settings prior to taking a photo:FSet the brightness.ISet the zoom factor.Image resolutionThe quality of the image can be set in four stages regardless of the preview image resolution. The highest possi-ble resolution is 1280 × 960 pixels.To create your own display back-ground, select the Wallpaper resolu-tion (p. 85).The resolution may decrease depending on the selected digital zoom.Video modeThe video mode resolution is the same as the preview image resolu-tion. You can set two different resolutions.CStart the video recording.CEnd the video recording.A red dot appears in the top right of the display while the video recording is being made. §Play§ Plays the video recording.Flash (accessories)If the flash is active, this is shown by a symbol in the display. The flash is constantly charged while connected to the phone and switched on. This reduces the stand-by time.×This symbol appears when the flash is being charged.For settings, see options menu.
49Camera© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Camera.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (49) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Camera optionsThe following functions are avail-able, depending on the current situation.§Options§ Open menu.Settings • Name for recordings• Image resolution• Colour mode: normal, sepia, grey tones.• Storage medium: My stuff (p. 128) or RS MultiMediaCard (p. 129) Pictures Display list of photos.Other videos Display list of videos.Microphone on Switch microphone on or off. Use flash Choose between: Automatic, Off, Red-eye Auto-timer The photo is taken approx. 15 seconds after trigger-ing. For the last 5 seconds, you will hear a beep each second.White bal-ance Choose between: Automatic, Indoor, Outdoor (For standard functions see p. 22)Additional informationÊInsufficient memory available. Start the memory assistant to delete specific data (p. 91). Alternatively, you can transfer data to the RS MultiMedia-Card.
Main Inbox50© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_UnifiedInbox.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (50) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Main InboxThe inbox folder offers immediate access to the messages currently re-ceived. This means that you no long-er have to look through all inbox folders for the various message types. The entries are marked with a symbol to indicate their type and sta-tus. You will find an overview of the symbols on p. 14.To call up the inbox folder, e.g. if you have received a new SMS:çPress the softkey beneath the symbol.Or EPress in standby mode.In the inbox folder you will find the following message types:SMS, MMS, E-mail System messagesNotification about MMS, Missed alarm, Missed appts., Missed calls, WAP push, Voice message Data objectsRing tones, Pictures and Video, calen-dar entries, Notes and Business card. CWhen you open an entry, the relevant application also starts. After a set period, entries which have already been read and opened are only displayed in the message-related incoming lists (see Settings in the options menu).Main Inbox options§Options§ Open menu.Receive emails Select set account and send all e-mails.Settings If entries have been read, remove them from the Main Inbox:Daily, Never, Immediately If Daily has been select-ed, specify the time.(For standard functions see p. 22)Additional informationWhere applicable you will receive WAP push messages from special servers. These may contain information from the service provider or important data such as how to set up a connection profile.§Accept§ For example, start setting up a connection profile automatically.
51SMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (51) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)SMSYou can use your phone to transmit and receive very long messages (up to 760 characters). They are automatically composed of several “normal” SMS messages (note higher charges).Additionally, you can insert pictures and sounds in an SMS.Write/sendC¢M¢Create new¢SMSJEnter text. You will find information on writing texts with and without T9 in the chapter “Text entry” (p. 26). The following is displayed in the display line: text en-try status, number of SMS required, number of char-acters still available.AStart sending procedure.Ï/JSelect phone number from the Phonebook/Addressbook or enter it.§Group§ If necessary, select a group.CConfirm. The SMS is trans-mitted to the service cen-tre to be sent and saved in the Sent items list.Text options§Options§ Open menu.Save Save composed text in draft list.Picture&sound Add pictures, anima-tions and sounds to message (see following text).Insert from Text module (p. 29), Bookmarks, From 9 (Addressbook/Phone-book).Format Font size: Small font, Medium font, Large font Underline Alignment: Default alignm., Left, Center, Right Mark (highlight text with the joystick)Delete text Delete the whole text.Send with... Select SMS profile so the SMS can be sent.(For standard functions see p. 22)
SMS52© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (52) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)Picture&soundSend pictures and sounds with or without accompanying text. Remember that these may be pro-tected (DRM, p. 20).With the text input field open:§Options§ Open menu.ISelect Picture&sound. The menu contains:Def animations Def. sounds My anim. My pictures My sounds ISelect list.CConfirm. The first entry of the selected section is displayed.IScroll to entry required.For Def animations/Def. sounds:CThe selection is added to the SMS.For My anim./My pictures/My sounds:CThe selection is displayed/played back.CThe selection is added to the SMS.The pictures which have been added are displayed. Sounds are displayed in the form of “wildcards”.SMS to groupYou can send an SMS message as a “circular” to a recipient group.AStart sending procedure.§Group§ The Addressbook is opened.<Groups> The list of groups is displayed.ISelect group.COpen group and highlight all/individual entries.CTransmission is started af-ter a security prompt.
53SMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (53) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)ReadpArrival of a new SMS an-nounced in the display. Open Main Inbox (p. 50) with the softkey beneath it.CReading the SMS.IScroll through message line by line.ReplyYou can answer the SMS that is cur-rently open immediately. The newly added text is placed above the re-ceived text.CReply immediately.Reply options§Reply§ Open reply menu.Read options§Options§ Open reply menu.çSMS01.05.2005         19:42+ 12398765431SMS text. . .Reply ì Options  Write message Create a new reply text.Edit Edit received SMS or add new text.Answer is YES Add Answer is YES to the SMS.Answer is NO Add Answer is NO to the SMS.Please call back, Delay, Thank youAdd a standard text as a reply to the SMS.Reply See “Reply options” above.Picture&sound Save picture/sound contained in the SMS.Zoom in Enlarge or reduce text display.Archive Move SMS message to archive.(For standard functions see p. 22)
SMS54© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (54) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)ListsAll SMS messages are archived in dif-ferent lists, according to their status. (For overview of message symbols, see p. 14):InboxC¢M¢Inbox¢SMSThe list of received SMS messages is displayed.DraftC¢M¢Draft¢SMSThe list of not yet transmitted SMS messages is displayed.UnsentC¢M¢Unsent¢SMSThe list of concatenated SMS mes-sages not yet sent is displayed. Transmission can be restarted.Sent itemsC¢M¢Sent¢SMSThe list of sent SMS messages is displayed.SMS archiveC¢M¢SMS archiveThe list of SMS messages stored in the phone is displayed. List optionsDifferent functions are offered de-pending on the list.§Options§ Open menu.Send Send or forward entry.Send with... Select an SMS profile for transmission.Archive Move SMS message to archive.(For standard functions see p. 22)
55SMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (55) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)SettingSMS signatureC¢M¢Msg settings¢SMS setup¢SMS signatureYou can enter a “signature” with up to 16 characters. This signature will then be attached to each SMS except for a §Reply§ and when changes are made to an existing SMS.SMS profilesC¢M¢Msg settings¢SMS setup¢SMS profilesUp to 5 SMS profiles can be set. These define the transmission char-acteristics of an SMS. The pre-setting depends on the SIM card inserted.Activate profileISelect profile.CActivate.Set profileISelect profile.§Edit§ Open to edit the profile.Service center Enter the phone numbers for the service centre as provided by the service provider.Recipient Enter a standard recipient for the profile.Message type •Manual: Inquiry for all mes-sages.•Standard text: Normal SMS message.•Fax: Transmission via SMS.•E-mail: Transmission via SMS.•New: You may need to ob-tain the required code num-ber from your service provider.Validity period Period in which the service centre is to try to deliver the message:Manual, 1 hour, 3 hours, 6 hours, 1 day, 1 week, Maximum* * Maximum period that the service provider permits.Status report = Receive confirmation of suc-cessful/failed transmission of a message. This service may be subject to a charge.Direct reply = If activated, the reply to your SMS message is handled via your service centre (for infor-mation, please contact your service provider).SMS via GPRS = Send SMS automatically via GPRS (p. 94).Save aft. send Sent SMS messages are saved in the Sent items list.
SMS56© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (56) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)More information on SMSSMS status reportIf the message cannot be transmit-ted to the service centre you are of-fered the chance to repeat the trans-mission. If this also fails, contact your service provider. The Message sent. message only indicates trans-mission to the service centre. This will then attempt to relay the mes-sage within a certain period.See also Validity period (p. 55).Phone number in SMSPhone numbers displayed §highlighted§ in the text can be dialled (A) or saved in the Phonebook/Ad-dressbook.Downloading ringtones and logosYou can receive links for download-ing ringtones, logos, screensavers, animations and information about applications with an SMS. Please highlight this link and, by pressing the Call key A, start the download. Please check that the dial-in access is configured (p. 97).Remember that these may be pro-tected (DRM, p. 20).ãSIM memory fullIf the message symbol flashes the SIM memory is full. No more SMS messages can be received. You need to delete messages or move them to the RS MultiMediaCard.
57MMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (57) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)MMSThe Multimedia Messaging Service enables you to send texts, pictures/videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a “slide show”.Depending on your phone's settings, you will receive either the complete message automatically or notifica-tion that an MMS has been saved in the network, giving sender and size details. You may then download it to your phone to read it. Ask your service provider whether this service is available. You may need to register for this service sepa-rately.CreateC¢M¢Create new¢MMSAn MMS consists of the address header and the content. An MMS may consists of a series of pages. Each page may contain a text, a picture/video and a sound. Re-member that pictures and sounds may be protected (DRM, p. 20).Write texts with the help of T9 (p. 26).Pictures and videos can be recorded with the integrated camera and/or loaded from My stuff (p. 128).Sounds can be recorded with the sound recorder and/or loaded from My stuff (p. 128). First select an object for processing to be added to the first page of the MMS:Pictures/videosLimits on picture size can be set in the user settings.CDisplay picture/video functions:Insert pictureOpen list to select a picture.Insert videoOpen list to select a video.CameraActivate the camera to take a photo or record a video for the MMS (p. 47). RAlso possible.Open Display picture.Delete itemDelete inserted picture/video.Save picture/Save videoSave picture/video for use later on.Rights detailsDisplay properties, including any user right restrictions (p. 20).
MMS58© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (58) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)SoundsSOUND Select. CDisplay sound functions:Insert soundOpen list to select a sound.RecordActivate sound recording to record sounds (p. 121).mAlso possible.OpenPlay back sound.Delete itemDelete inserted sound.Save sound Save sound to use later on.Rights detailsDisplay properties, including any user right restrictions (p. 20).TextTEXT Select and write the text.CThe text functions are dis-played (see also p. 26):InsertChoose any of the following for insertion: Text module, Bookmark, From 9 Delete textDelete text on current page.Save textSave text on the page as a text module.T9 inputT9 settings: T9 preferred, Input language MarkText processing together with Copy and Insert.
59MMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (59) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Generation options§Options§ Open menu.TemplatesC¢M¢MMS templatesMMS templates are MMS messages that are saved without an address. They can be sent as new MMS mes-sages or used as part of a new MMS. A maximum of 10 templates can be saved.Create templates by writing a new MMS or using an MMS which you have already received. §Options§ Open menu and select Save as templ.Send Send MMS.Preview Play entire MMS on the display.Picture... See p. 57.Sound... See p. 58.Text... See p. 58.Page... Add page: Insert new page after current one.Delete Page: Delete cur-rent page.Page list: Display available pages.Timing: Enter the lifespan of a page in seconds.Properties Enter sending parameters (p. 61).Save as templ. Save created MMS as a template. See also below.Layout Select one of four possible layouts:Text above, beneath, beside (on left or right of) picture.Color... Select the colours for:•Pict. backgrd. •Text backgrd. •Text color (For standard functions see p. 22)
MMS60© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (60) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)SendThe page(s) of the new MMS is (are) already created and the MMS is displayed.AOpen address entry.Subject: Enter a brief description.Send to: Enter one or more phone number(s)/e-mail address(es). Ï Insert from Address-book.Size: Display the size of the current MMS in kilobytes (KB).Attachments:Insert attachments.AStart sending procedure. CThe MMS is sent after confirmation.Expanded address fieldsHScroll downwards.FMore: Provide additional address fields.Cc: Address(es) of copy recipient(s).Bcc: Address(es) of copy recip-ient(s) who are not visible to the other recipients.Date: Creation date.Use delivery time:Use specified send time. If §Yes§:Delivery date: Send date.Delivery time: Send time.Symbols for status informationÞPriorityßSend reportáContains DRM (p. 20)çMMSSubject:Greetings from LondonTo:+1234567654321 | Size:85 KB Þßá Ð í Options
61MMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (61) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Sending options§Options§ Open menu.ReceiveDepending on the setting (p. 63), an MMS can be received in two ways:Complete transmissionThe complete MMS is sent to your phone. This can take quite a while if the MMS is large.çShown in the display.<Start reception. The MMS is sent.Preliminary notificationYou are notified that an MMS is wait-ing to be received.wShown in the display.<Open the notification. Display sender/date.CDisplay the properties of the MMS.§Accept§ The complete MMS is sent.§OK§ Display in Main Inbox.Send Send MMS.Play Play entire MMS on the display.Edit Display object selection so that object can be changed.Add addressee Add recipient from the cur-rent address directory.Del. addressee Delete individual recipient.Add attchmnt. Add attachment:•Business card •Appointments •Picture •Video •Audio •File Page list Display MMS pages for viewing and/or changing.Save as templ. Save created MMS as a template.(For standard functions see p. 22)
MMS62© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (62) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)ReadAn MMS has been received in full.ISelect the MMS.CStart automatic playing of the MMS.Key functions for playback:ETo the next page.DPress briefly once to re-turn to the start of the current page; press briefly twice to return to the start of the previous page.ISet volume.C/BEnd.The message details are displayed when the MMS is complete.Subject: Description of the MMS.From: Information about the sender.Size: Size of the MMS in KB.Expanded address fieldsIScroll downwards.More: Additional input fields.Cc: Copy recipient.Attachments:Save attachments.Date: Date received.Symbols for status information(see p. 60).ListsAll MMS messages are saved in four different lists (for overview of mes-sage symbols, see p. 14):InboxC¢M¢Inbox¢MMSThe list of MMS messages and notifi-cations received is displayed. To re-ceive an MMS at a later time, open notification and press §Accept§. DraftC¢M¢Draft¢MMSThe list of stored drafts is displayed.UnsentC¢M¢Unsent¢MMSThe list of the MMS messages not yet fully transmitted is displayed.Sent itemsC¢M¢Sent¢MMSThe list of sent MMS messages is displayed.
63MMS© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (63) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)List optionsDifferent functions are offered de-pending on the list/situation.§Options§ Open menu.SettingC¢M¢Msg settings¢MMS settings¢Select function.Connection profile:Six MMS profiles can be set (5 in the telephone memory, one on the SIM card). The send properties can be specified in them. In most cases, they have already been set. If neces-sary, check with your service provid-er for details.Activate profileFSelect profile.§OK§ Profile is activated.Set profile§Change§ Display list of profiles. ISelect profile.§Edit§ Press. Make settings.Play Play MMS on the display.Edit Display MMS for pro-cessing.View Display MMS for viewing only (write-protected).Send all Send MMS.Reply to all Reply to MMS immediately.Forward Enter recipient(s) for forwarding.Properties Display message parameters.Receiv.all MMS Send all new MMS messages immediately.(For standard functions see p. 22)
MMS64© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (64) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)User settingsSet the MMS dispatch to suit your requirements:Delivery report: Request delivery confirma-tion for sent messages.Default priority: Send priority: Normal, High, Low Expiry time: Select the period of time in which the service centre is to try to deliver the message:Manual, 1 hour, 3 hours,6 hours, 1 day, 1 week, Maximum* * Maximum period that the service provider permits.Page duration: Enter the lifespan of a page in seconds (standard re-quirement).Scroll forward in Manual or Automatic mode.Retrieval: Receive complete MMS or only notification of arrival.Automatic Receive complete MMS immediately.Auto.homenet Receive complete MMS im-mediately in home network.Manual Only receive the notification.Create mode: Free, Limited, WarningMay be used to receive a warning message or to limit the size of a message.Size indica-tion: = Set max. message size and message handling.
65E-mail© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Email.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (65) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)E-mailYour phone has an e-mail program (client). You can use it to create and receive e-mails.WriteC¢M¢Create new¢E-mailEnter the address details for the e-mail:To: Enter one or more e-mail address(es). Ï Insert from Address-book/Phonebook.Subject: Enter e-mail heading (up to 255 characters).Text: Enter text. Expanded address fieldsMore: Open additional input fields. Cc: Address(es) of copy recipient(s).Bcc: Address(es) of copy recip-ient(s) who are not visible to the other recipients.Attachments:Add attachments such as images and sounds.To sendAPress.OptionsDifferent functions are offered depending on the position of the cursor.§Options§ Open menu.Send Send e-mail.Send later Transfer e-mail into the Unsent list.Save Save e-mail in the Draft list.Add addressee Add recipient from the current address directory.Delete line Delete current line.Insert from Text module Bookmark From 9 insert from the Addressbook/Phonebook.Add attchmnt. My stuff Open to make a selection. Remember that pictures and sounds may be protect-ed (DRM, p. 20).Delete text Delete the whole text.Text input •T9 preferred •Input language
E-mail66© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Email.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (66) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Receive/readC¢M¢Inbox¢Select function.Before an e-mail can be read, it must be retrieved from the server. You have two options:Retrieve emailOnly the message header in the Main Inbox (p. 50) is sent. You can then decide if you also want to receive the contents:§Options§ Open menu and select Ret. content.or if you want to delete the e-mail on the server:§Options§ Open menu and select Del. on server.Send/receiveThe set access is selected and all e-mails transferred to the Main Inbox (p. 50). At the same time, completed e-mails are transferred from the Unsent list. AttachmentsContains the e-mail attachments; these can be saved in My stuff (p. 128).§Options§ Open menu and select Save attach.ListsAll e-mails are saved in different lists depending on their status (for over-view of message symbols, see p. 14):InboxC¢M¢Inbox¢E-mailThe list of received e-mails is displayed. DraftC¢M¢Draft¢E-mailThe list of e-mails not yet transmit-ted is displayed.UnsentC¢M¢Unsent¢E-mailThe list of e-mails not yet transmit-ted is displayed. Sent itemsC¢M¢Sent¢E-mailThe list of transmitted e-mails is displayed.
67E-mail© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Email.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (67) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)List optionsDifferent functions are offered de-pending on the list.§Options§ Open menu.SettingC¢M¢Msg settings¢E-mail setup¢Select function.AccountsBefore using this service you must set the server access and your e-mail parameters. You will receive the necessary data from the service provider.ISelect account.Activate accessCActivate an account that has already been created.Set access§Edit§ Start editing. Fill in the-data fields as specified by your service provider.General sett.Enter an e-mail address to which a Bcc (blind carbon copy) is always sent.Retrieve email Only transfer the message header into the Main Inbox (p. 50).Ret. content Retrieve the contents from the server if only the mes-sage header was received.Del. on server Delete the contents on the server if only the message header was received.(For standard functions see p. 22)
Voice message/mailbox68© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Mailbox.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (68) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Voice message/mailboxC¢M¢Msg settings¢Voice messageMost service providers provide a mailbox in which a caller can leave a voice mail for you• if your phone is switched off or not ready to receive,• if you do not want to answer,• if you are making a phone call (and if Call waiting (p. 89) is not activated).If the voice mail service is not part of your service provider's standard package, you will need to register, and possibly adjust the settings man-ually. The following sequence may vary from service provider to service provider.Settings bThe service provider supplies you with two phone numbers:Save mailbox numberYou call this phone number to listen to the voice mails left for you. C¢M¢Msg settings¢Voice messageÏ/JSelect number from Phonebook/Addressbook or enter/change it. §OK§ Confirm.Save call divert numberCalls are diverted to this phone number. C¢T¢Call setup¢Divert ¢e.g. Unanswered¢SetJEnter phone number.Or §Mailbox§ Press to divert call to the mailbox number.§OK§ Registration with the net-work is confirmed a few seconds later.Listen to message bA new voice message can be an-nounced as follows, depending on the service provider:ÀSymbol plus beep.Or çNotification via SMS.Or You receive a call with an automatic announcement.Call your mailbox and play the mes-sage(s) back.1Press and hold (if neces-sary enter mailbox num-ber once). Confirm with §OK§ and §Mailbox§ depend-ing on your service pro-vider.
69Chat room© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (69) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Chat room bWith Chat room you can transfer text, audio clips, pictures and files straight to and from one or more terminals (mobile phone, PC). This function is not offered by all service providers. Please ask your service provider about this.Your dialogue partners are entered in contact lists. When a connection has been established, these lists show who is available, whether he/she wants to be disturbed and what mood he/she is in at present. GPRS must be switched on.C¢M¢Chat roomStart menuLogin Select the access through which the dialogue is to take placeor select Account (p. 74).Msg. historyRead the messages from the last session.Settings Settings for your repre-sentation, the applica-tions and servers.Exit End application.Fast access ...Select account (p. 74)C¢M¢Chat room¢LoginThe current contact list or the over-view is displayed (if necessary, set account first, p. 74).Specify your own status (p. 75)§Options§ Open menu.My settingsSelect and make entries. BReturn to contact list.Enter new contact§Options§ Open menu.Set Press, then:Add contactselect and enter at least the user ID.BReturn to contact list.Hold dialogue with new contact (p. 73)ISelect the contact.CStart dialogue.COpen editor.
Chat room70© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (70) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)JWrite text. CSend text ...... and so on. LoginC¢M¢Chat room¢LoginSelect the last account used (see also Automatic login: p. 75).Contact listsWhen the connection has been es-tablished, the contact list or the overview of the contact lists is shown for selection.In the contact list, you will find a list of the most recently used contacts. The first time you log in, an “empty” contact list will be generated by the server if necessary.Displays in the list:-ConversationDisplays online contacts for whom there are messages.-OnlineOnline contacts with whom no con-versations are being held at present.-Group bGroups for Inst. Messaging with several contacts.-OfflineContacts who are not online at present.Manage contactsISelect a contact.§Options§ Open menu.Set Select. ContactsDifferent functions are offered depending on the selection:Add contact User ID: Enter an unambiguous user (login) name.Nickname: Enter your own nick-name for the contact.Friend: The contact receives the status Friend: and access to personal infor-mation (p. 75).Find contact Search for contact.Delete contact Delete contact from the list.Block contact No more messages are received from the con-tact and the contact receives no status infor-mation from you. This function works for all your lists.
71Chat room© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (71) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Manage groups bISelect one of the groups you set up yourself.§Options§ Open menu.Set Select. Group settingsDifferent functions are offered de-pending on the selection:Add member Add a new group member, see also Add contact.Find member Search for group member.Invite Invitation to the contacts in your own group to Inst. Message.Delete member Delete contact from the group member list.Add group Add new group.Find group Search for group on the server (also groups no longer managed in the list). Create group Group ID: Enter an unambiguous group name.Name: Name of group.Topic: Topic of group.Searchable: Other people can look for the group.Welcome msg.: Enter own greeting.Create group Delete group.
Chat room72© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (72) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Create a new contact listThe current contact list is displayed.§Options§ Open menu.Contact listsAvailable contact lists are displayed. §Options§ Open menu.Create Select. Contact list ID:Give the contact list an unambiguous name.Name: Allocate self-explanatory name.CConfirm.Contact list options§Options§ Open menu.Details = Additional information about the contact or the group.My settings Information on your cur-rent personal status (p. 75).Set Functions for managing a contact or a group.Contact lists Display contact lists for selection.Block listtp Display all blocked con-tacts. Can be unblocked.App. settings Set the application (p. 75).Exclude End the application; the server remains connected.Logout Log off from the server and return to start menu.Help Display help text.
73Chat room© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (73) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Start Chat roomA contact list must be displayed.ISelect a contact or a group. CStart communication with the contact. The page with the Chat room is displayed. When a group is engaged in a dia-logue, the name of the sender is placed in front of each contribution.COpen editor.JWrite text. CSend text. The text ap-pears in the Chat room soon afterwards.Naturally, you can also receive mes-sages from contacts you do not know. This will be pointed out to you in the display, and you can either switch to Inst. Message or ignore/block the contact.Options (individual contact)§Options§ Open menu.Send sound = Select and send a melody/sound from the list (DRM, p. 20).Send picture = Select and send a picture from the list (DRM, p. 20).Send other = Send any file.Details Information about the con-tact, if they authorise this.Clear all Delete all texts in the cur-rent Inst. Message.Block contact No more messages are re-ceived from the contact and the contact receives no status information from you. This function works for all your lists.
Chat room74© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (74) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Options (group contact) b§Options§ Open menu.Receiving objects bIf sounds or pictures are sent to you during a dialogue, you will be in-formed of such in the display. §Accept§ Accept objector §Reject§ Reject object.Msg. historyC¢M¢Chat room¢Msg. historyThe messages from the last meeting are displayed. You can read and de-lete the contributions.Requirement: The server must be disconnected, see Exclude (p. 72) and Automatic login: (p. 75).SettingC¢M¢Chat room¢Settings ¢Select function.AccountThe list of available accounts is displayed.I/CSelect an account to es-tablish a connection.Or <New entry>/Account sett. bSet up an account or change the set-tings as specified by the service pro-vider. Depending on the service pro-vider, the settings may not be changeable.Leave group Exit group.Details Information about the group:Group ID:, Name:, Topic:, Owner: Clear all Delete all texts in the cur-rent Inst. Message.Name: Name of account.URL: Enter URL, e.g.www.abc.comUser ID: Enter an unambiguous us-er (login) name.Password: Enter password (shown as a series of asterisks).
75Chat room© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (75) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)My settingsInformation on your current person-al status:§Options§ For each setting, specify who is allowed to view your personal information:PublicAll contacts.PrivateContacts designated as Friend: (p. 70).HideNobody.App. settingsSettings for the application used:Alias: Your own alias under which you can be found on the server.Screen name: Name to be displayed in the group.Mood: Information about your own mood, e.g.Happy, Sad, Tired etc.Status text: General text information, e.g. “Am at home”.Availability: Availability:Available, ,  Cellphone: Enter the phone number with international dialling code.Automatic login: Auto-reconnect to the last account used.Timeout: Time without action after which the application is terminated. However, the server remains connected.Message info:/Online info: Signal the receipt of messages: Yes/No Signal given as:•Audio •Silent alert •Pop-upPopup windows authorised: Yes/No
CB services76© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_CB.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (76) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)CB servicesC¢M¢Msg settings¢CB servicesSome service providers offer infor-mation services (info channels, Cell Broadcast). If reception is activated, you will receive messages on the ac-tivated topics in your Topic list. CB messages are displayed in stand-by mode; longer messages are scrolled automatically.Receive CBYou can activate and deactivate the CB service. If the CB service is activat-ed, standby time for the phone will be reduced.Topic listYou can add any topics to this per-sonal list from the topic index. You can preset 10 entries with their channel numbers (ID) and, if applica-ble, with their names. New topic Select.• If no topic index is available, enter a topic with its channel number and confirm with §OK§.• If the topic index has already been transmitted, select a topic and ac-tivate it with §Options§.Topic Select§Options§ Open list menu.If a topic is selected in the list you can view it, activate/ deactivate it, edit it or delete it.CB languagesReceive Cell Broadcast messages in only one specific language or in all languages.Zoom inYou can set three fixed sizes for the presentation of the display texts across the entire message range:Default Medium font sizeZoom + Large fontZoom - Small fontDisplaysÖ, ÕTopic activated/deactivated.pNew messages received on the topic.qMessages already read.
77Surf & fun© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Internet.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (77) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:15)Surf & funObtain the latest information from the Internet that is specifically adapt-ed to the display options of your phone. In addition, you can down-load games and applications to your phone. Internet access may re-quire registration with the service provider.Access to the service providerDirect call-up of the browser with the URL from your service provider.InternetC¢O¢InternetThe browser is activated with the pre-set option as soon as you call up the function (Browser settings, p. 78; may be specified/pre-assigned by service provider). Browser menu§Options§ Open menu.Homepage Call up the pre-set home-page for the current pro-file.Bookmarks List bookmarksDisplay list of bookmarks stored in the phone. Bookmark siteThe current page is saved as a bookmark.Go to... Enter URL to dial an Inter-net address directly, e.g.wap.siemens.com Reload Reload current page.Show URL Display the URL of the page currently loaded for sending via SMS/MMS/e-mail.History Display most recently vis-ited Internet sites.Disconnect Disconnect the Internet.File Save object on the current page or save the com-plete page; display saved pages.Settings Set or reset browser (p. 78).Exit browser Close the browser.
Surf & fun78© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Internet.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (78) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:15)End connectionB Press and hold to clear down the connection and close the browser.Navigation in the browserDisplay symbols in the browser (selection)Enter special characters*Table of special characters (p. 26).0List of special characters, depending on the situation.Browser settingsC¢O¢Internet§Options§ Open menu.Settings Select.C • Select a link.• Settings, status on/off.B •Press briefly: one page back.I • One input field/link forward/back.• Scroll one line.² Connect ´ No network± Network ³ GPRS onlineBrowser Set start option as well as handling of pictures and sounds plus send options.Profiles The list of profiles is dis-played for activation/setting. For more information, con-tact your service provider.Protocol parameters Set protocol parameters, push messages and abort time as well as handling of cookies.Security Set encryption.Context Reset session; delete cache, history and cookies.Your Internet browser is licensed by:
79Surf & fun© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Internet.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (79) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:15)ProfilesPreparation of the phone for Internet access depends on the service pro-vider concerned:Profil pre-setIn most cases, access profiles have already been created for one or more service provider(s).ISelect profile.CActivate profile.Set profile manuallyIf necessary, please contact your ser-vice provider.§Options§ Open menu.BookmarksC¢O¢BookmarksDisplay URL/call up pageList bookmarksDisplay list of bookmarks stored in the phone.ISelect bookmark.CCall up URL.SaveBookmark siteThe current page is saved in the phone as a bookmark.Bookmark options§Options§ Open menu.Here you will find functions for changing and managing bookmarks and their folders. This includes edit-ing individual entries with the corre-sponding URLs as well as deleting and moving them to other folders.Edit Start processing. For the Internet-specific settings below, please contact your service provider.Delete Delete selected profile.
Surf & fun80© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Games&Apps.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (80) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Surf & fun Games and ApplicationsGames and applications are offered on the Internet. Once downloaded, you can access these via the phone. Most applications include instruc-tions. Some applications and games are already pre-installed on your phone. You will find these described underwww.siemens.com/m75RequirementsBrowser profile (p. 78) and access (p. 97) must be configured already.DownloadSelect the correct access depending on whether you are loading games or applications:C¢O¢Games orC¢O¢ApplicationsLoad or start games, or else start applications or reload them with Download-Assistant.Description file onlyÌThe description file is loaded for information purposes only. The appli-cation/game itself must be loaded separately. or complete downloadËThe application/game is completely loaded.ApplyRemember that applications/games may be protected (DRM, p. 20).ÍThe executable applica-tion is saved on the phone and can be started immediately.Download wiz.C¢O¢Download wiz.You will not be left on your own during the download!
81Surf & fun© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Games&Apps.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (81) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Games&More optionsProcessing and managing your appli-cations and folders:Move Move applications between folders. New folder Create and name new folder.Update Reinstall an application (update).Security Select a security level.Reinstall Repeat after transmission error.Properties Show details of the applica-tion/folder (name, version, size, path, producer, date).HTTP profile Display profile list for activation/setting(For standard functions see p. 22)Additional informationYou can use the browser to download applica-tions (e.g. ringtones, games, pictures, anima-tions) from the Internet. Siemens excludes all warranty and liability claims in respect of or in connection with any applica-tions subsequently installed by the customer and any software not included in the original delivery package. This also applies to functions enabled subsequently at the customer's instigation. The purchaser bears sole risk for the loss of, damage to, and any defects arising in, this device or the applications and for any direct damage or conse-quential damage of whatever nature resulting from the use of this application. For technical rea-sons, such applications and subsequent enabling of certain functions are lost in the event of the de-vice being replaced/re-supplied and may be lost if it is repaired. In such cases, the buyer is required to download or enable the application again. Please ensure that your phone has Digital Rights Management (DRM) so that downloaded applica-tions are protected from unauthorised reproduc-tion. These applications are then exclusively intended for your phone and cannot be trans-ferred from this even to create a backup. Siemens offers no warranty or guarantee nor does it accept any liability for the customer's abil-ity to download or enable applications again or to do so free of charge. We recommend that you carry out a backup from time to time of the appli-cations on your Windows® PC using the “Mobile Phone Manager” (www.siemens.com/m75), p. 130.
Settings82© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Profiles.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (82) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)SettingsProfilesC¢T¢ProfilesSeveral settings can be stored in a phone profile in order, for example, to adapt the phone to the surround-ing level of noise.• Six standard profiles are provided with default settings. They can be changed however: Normal environment Quiet environment Noisy environment Car Kit Headset  • You can set two personal profiles (<Name>).• The special profile Airplane mode is fixed and cannot be changed.Switch onISelect default profile or personal profile.CSwitch on profile.Profile settingsEdit a default profile or create a new personal profile:ISelect profile.§Options§ Open menu.Change sett.Select.The list of available functions is displayed.When you have finished setting a function, return to the profile menu where you can change a further setting.Additional informationCall up the list in standby mode:GThe profile list is displayed.The active profile is identified with ·.
83Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Profiles.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (83) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Profile options§Options§ Open menu.Car Kit If an original Siemens car kit is used, the profile is switched on automati-cally when the phone is inserted into the cradle (see also p. 140). HeadsetThe profile is only switched on auto-matically if an original Siemens headset is used (see also p. 139).Airplane modeAll alarms (appointments, alarm clock) are deactivated. This profile cannot be modified. Switch onHScroll to Airplane mode.CConfirm selection.CConfirm safety inquiry again in order to activate the profile. The phone switches itself off auto-matically.Normal modeWhen you switch on your phone again, the previously set profile will be reactivated automatically.Activate Activate selected profile.Change sett. Change profile settings.Copy from Copy settings from another profile.Rename Change personal profile (except default profiles).
Settings84© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Themes.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (84) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings TopicsC¢T¢TopicsLoad a completely new visual pre-sentation onto your phone. At the press of a key various functions are re-organised on a theme basis, e.g.:Start up/shut down animation, wallpaper, screensaver, start up/shutdown melody, additional animations.Theme files are compressed to save memory space. After being down-loaded or called up from My stuff, these are automatically unzipped when activated. Activating a new themeISelect theme.CDisplay theme preview.CActivate new theme.
85Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Display.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (85) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings Display setupC¢T¢Display setup¢Select function.LanguageSet the language for the display text. When “automatic” is set, the lan-guage of your home service provider is used. If a language that you do not under-stand happens to be set, the phone can be reset to the language of your home service provider with the fol-lowing input (in standby mode):* # 0 0 0 0 # A Text inputT9 preferredActivate/deactivate intelligent text entry.Input languageSelect language for text entry. Lan-guages with T9 support are marked with the T9 symbol.WallpaperSet wallpaper graphic for the display.LogoChoose graphic to be displayed in-stead of the provider logo.Color schemeSelect colour skin, incl. background image for the entire user interface. ScreensaverAfter a specifiable time, the screen-saver shows a picture in the display. An incoming call and/or pressing any key will end the function except if the code protection is activated. Change settings:§Change§ Settings are displayed:PreviewDisplay the screensaver.Style:Select Analog clock, Digital clock, Bitmap, Energy saving Picture:Select image in My stuff.
Settings86© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Display.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (86) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Timeout:Set period after which the screen-saver starts.Code protection:The phone code is requested to close the screensaver.Auto key lock:Automatic keypad locking if no key has been pressed for one minute in standby mode.Unlocking:#Press and hold.Start up anim.Select animation to be shown when phone is switched on.Shutdn anim.Select animation to be shown when phone is switched off.GreetingEnter greeting to be displayed in-stead of animation when phone is switched on.Large lettersYou can choose between two font sizes for the display.IlluminationSet display illumination to brighter/darker. The darker the setting the longer the standby time.IPress the joystick repeat-edly at the top/bottom to adjust up or down.NoteThe animated Bitmap screensaver and the Digital clock considerably reduce the phone’s standby time.
87Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Ringtones.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (87) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Settings Ring tonesC¢T¢Ring tones¢Select function.Set the signal tones on the phone to suit your requirements.Ringer settingOn/off Activate/deactivate all tones. Beep Reduce ringtone to a short signal (beep).Silent alertTo avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alterna-tive. The silent alert can also be acti-vated in addition to the ringtone (e.g. in noisy environments). This function is deactivated when the battery is being charged and acces-sories are connected (except the headset).CSettings are displayed for changing.ISelect from several silent alert versions. CConfirm setting.VolumeSet different volumes for types of call/functions.CSettings are displayed for changing.ISelectCalls PoC Messages CB services Alarm clock Organizer System Applications §OK§ The ringtone sounds again.ISet volume.CConfirm setting.Additional informationPlease make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.
Settings88© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Ringtones.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (88) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Assign ringtoneA ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection.d CallsAssign a single ringtone to all phone numbers in the Addressbook.Group callsAssign a different ringtone to each group.Other callsAssign one ringtone to the remain-ing calls.PoCAssign one ringtone to PoC calls.More melodiesAssign further ringtones for:Messages Alarm clock Organizer Startup melody Shutdown mel. or record new with:Sound recorder (p. 121) You will find a list of all supported formats for ringtones in My stuff (p. 129).
89Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_CallSetup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (89) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Settings Call setupC¢T¢Call setup¢Select function.Hide ID bWhen you make a call, your phone number can be displayed on the re-cipient's display (depending on the service providers).To suppress this display, you can en-able the “Hide ID” mode for all subse-quent calls or just for the next call. You may need to register separately with your service provider for these functions.Call waiting bIf you are registered for this service, you can check whether it is set and you can activate/deactivate it.DivertYou can specify the conditions under which calls should be diverted to your mailbox or other numbers.Status checkYou can check the current divert status for all conditions. After a short pause, the current situation is transmitted by the network and displayed.ÖCondition set.ÕNot set.ÔDisplay if status is un-known (e.g. with a new SIM card). Clear all bAll set diversions are cleared.Set up call divert (example)The most common condition for call divert is, for example:Unanswered  bISelect Unanswered. (Includes the conditions Not reachable, No reply, Busy, see below)CConfirm.Set Select.CConfirm.Ï/JSelect or enter the phone number to which the calls are to be diverted.§Mailbox§ Use existing mail-box phone numbers, or enter them if necessary.§OK§ Confirm. After a short pause, the setting is con-firmed by the network.
Settings90© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_CallSetup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (90) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)All calls bAll calls are diverted.ÇSymbol in the top line of the display in standby mode.Not reachableDivert occurs if phone is switched off or is out of range.No replyA call is only diverted after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5-second intervals.BusyDivert occurs if a call is in progress. If Call waiting is activated (p. 31), you will hear the call waiting tone during a call (p. 33).Receiving fax bFax calls are diverted to a number with a fax connection.Receiving data bData calls are diverted to a phone number with a PC connection. Call screening bOnly calls from phone numbers that are in the Phonebook/Addressbook or assigned to a group are signalled. Other calls are only displayed.Any keyIncoming calls can be accepted by pressing any key (except for B).Minute beepDuring the call, you will hear a beep after each minute as a reminder of the time elapsed. The person you are talking to does not hear this beep.Additional informationNote that the divert is stored in the network and not in the phone (e.g. when the SIM card is changed).Reactivate divertThe last divert has been stored. Proceed as with “Set divert”. The stored phone number is displayed. Confirm number.
91Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneSetup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (91) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings Phone setupC¢T¢Phone setup¢Select function.Key tonesSet the type of acoustic key acknowledgement.Info tonesSet service and alarm tones:On/off Activate/deactivate tones.Extended If switched on, a wider range of service tones is available, e.g. end of menu reached, network connection interrupted.Auto offThe phone switches off each day at the set time.Activate§Time§ Press.JEnter time (24-hour clock).§OK§ Confirm.Deactivate§Manual§ Press.§OK§ Confirm.Phone identityThe phone identity number (IMEI) is displayed. This information may be useful for customer service. Device checkAfter the last information page, a self-test as well as individual tests are offered. If you select Self test, all individual test are carried out.Memory assis.The memory assistant will help you if there is insufficient phone memory. If required it can also be started au-tomatically from applications.After their capacities have been checked, all files and folders are dis-played along with their size and may be viewed/opened and, if necessary, deleted.Software versionDisplay the software version for your phone in standby mode:* # 0 6 #, then press §More§.
Settings92© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneSetup.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (92) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)File systemFormat(Phone-code protected)The telephone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted.Formatting may take longer than one minute.Clean upCreate more memory by deleting temporary files no longer required.Format cardAll saved dataon the RS MultiMedia-Card are deleted.Eject cardAllows the RS MultiMediaCard to be removed without loss of data. Fact. settingsThe phone is reset to default values (factory setting). This does not affect the SIM card or the network settings.Alternatively, in standby mode enter:* # 9 9 9 9 # A
93Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Clock.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (93) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings ClockC¢T¢Clock¢Select function.Time/dateThe clock must be set correctly once, at start-up.§Change§ Press.JFirst enter the date (day/month/year), then the time (hours/minutes/sec-onds).Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired time zone.City listISelect a city in the select-ed time zone.§Options§ Open menu.Date formatSelect the display format for the date.Time formatSelect 24h or 12h.Buddhist dateSwitch to the Buddhist year (not on all phone models). Show clockActivate/deactivate time display in standby mode.Auto time bThe timezone is identified automatically.Additional informationIf the battery is removed for longer than 30 seconds, the clock must be reset. Set Set time zone.Auto time zone = Have the time zone automatically set by the network.Search city Search for a city.Help Operating instructions.
Settings94© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (94) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Settings ConnectivityC¢T¢Connectivity¢Select function.GPRS b(General Packet Radio Service)CSwitch GPRS on/off.GPRS is a method for transmitting data faster in the mobile network. Use GPRS and if the network has suf-ficient capacity, you can be connect-ed to the Internet permanently. The network provider charges only for the volume of data transmitted. Some service providers do not yet support this service. Shown in the display:GPRS infoDisplay the transmitted volume.IrDACActivate/deactivate IrDA.Your phone has an infrared inter-face. With this interface, you can ex-change data such as pictures, ring-tones, Addressbook entries, business cards or organiser data with other devices which also have an in-frared interface. The infrared interface is on the left side of the phone. The distance be-tween the two devices must not ex-ceed 30 cm. The infrared windows in both appliances must be aligned as accurately as possible with each other.Shown in the display:¯IrDA activated.®During transmission.If IrDA is activated, standby time for the phone will be reduced.£ Activated and available.¢ Registered.¤ Temporarily interrupted.
95Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (95) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Bluetooth® (BT)Bluetooth is a short-range radio con-nection by means of which a headset or car kit, for example, can be con-nected without the need for wires. Using the Send/print function in the options menu for the application concerned you can also use this route to send data. With SAP (SIM Access Profile) a car phone GSM module can, for exam-ple, use the access data from the SIM card on your phone. There is no need to swap the SIM card. It is possible that SAP might not be supported by your service provider.Each Bluetooth device has its own specific address and can be given a self-explanatory name as an option. Password protection ensures the se-curity of a Bluetooth connection, as does including the BT partner in a list as a “confidential” device.To establish a Bluetooth connection between your phone and other Bluetooth devices you must activate Bluetooth.CActivate/deactivate Bluetooth. My BT name: You can give the phone a name when you activate Bluetooth for the first time.If Bluetooth is activated, IrDA (infra-red) is not active and vice versa. If Bluetooth is activated, standby time for the phone will be reduced.B-tooth setupCCall up the setting func-tions (Bluetooth must be activated). •Search/Search all Specify which BT devices are to be searched for:All All BT devicesAudio E.g. headset, car kitPhone Other BT phonesPC Personal computer with BT connectionCStart searchThe number and name of the most recently found BT device are displayed. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Siemens are under license. Other trademarks and trade names are those of their respective owners.
Settings96© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (96) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)CThe search is ended and the first 10 devices found are shown in a list.§Repeat§ Start new search.IScroll to entry required.CDial the device or start the procedure for acceptance as a “confidential” device (see below).§Options§ Open menu.•Known devices To make selection easier, frequent BT partners can be recorded in the known device list. If entries are “confidential”, no password query is made. •Last connect. List of most recently and/or still con-nected devices. •Black list Attempts to make connections to devices in this list are rejected.List optionsEach list offers different functions.§Options§ Open menu.Details Display the name and ad-dress of the BT device.Trusted dev. Add the device as confiden-tial to the list of known de-vices. To do this, enter the password for the other de-vice. The device must first be set to a “confidential mode”. If the list is full it is not possible to add another device.to known list Add to the list of known de-vices (see below). to black list Add to the black list (see below). Retry Start new search.Mark as audio If not possible automatical-ly, specify device as an “au-dio” device.Higher priority Move entry up the list so that, for example, a specific audio device is used first.Lower priority Move entry down the list.to known list Move entry to the list of known devices. to black list Move entry to the black list.(For standard functions see p. 22)
97Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (97) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)•My BT name The phone is given a name (max. 16 characters) – this is the name the partner sees. If no name is given, the phone uses the non-changeable de-vice address.•Visib.to others Set how your phone should respond to other BT devices. This means (if “visible”) for example that the device address or the BT name of your phone is shown to other BT devices if they request this in order to receive or send data.•Not visible Your phone is not “visible” to other BT devices. Known devices such as Bluetooth-Headset/Car Kit continue operating.•Auto mode Your phone is “visible” to other BT devices for several minutes. You will then be asked if “visibility” should continue.Data servicesBasic setting and activation of the connection profiles for data trans-mission such as MMS, WAP. The phone default setting varies from service provider to service pro-vider:• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be con-figured manually.If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet atwww.siemens.com/mobilephones-customercare in the FAQ section.Select profileISelect the profile.CConfirm selection.Set profileISelect the profile.§Options§ Open menu.§Edit§ Open the selection.ISelect CSD settings, and/or GPRS settings.§Edit§ Make the settings as specified by your service provider. Shown in the display¨Bluetooth activated.©Bluetooth visible to others.ªBluetooth during data transfer.«Call to Bluetooth device accepted.
Settings98© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (98) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)HTTP profileThe phone default setting varies from service provider to service provider:• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be con-figured manually.If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at www.siemens.com/mobilephonescustomercarein the FAQ section.IMake the settings.AuthenticationActivate or deactivate encrypted dial-up (CSD connections only) for Internet access.Fax/dataFax/data mode using a PCWith the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone. Fax and data services must be en-abled by the service provider. There are variations in fax and data recep-tion, depending on the network. Please ask your service provider about this.Send voice/fax bSet this function on the phone before transmission so that you can switch from voice mode to fax mode.
99Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (99) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Rec voice/fax  b(Only if no special fax or data number is available) Start the required communication program on your PC and activate the function on the phone during the call (the PC will take over the connection).End transmissionEnd transmission with PC software and/or press B.Rcve fax/data  bYour service provider has given you a number for telephoning and a fax/data number.The call is signalled by a special ring-tone and the type of call (fax or data) is displayed. Now start the commu-nication program on your PC to re-ceive the fax/data.
Settings100© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Security.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (100) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Settings SecurityC¢T¢Security¢Select function.Auto key lockThe keypad is locked automatically if no key has been pressed for one minute in standby mode. This pre-vents the phone from being used ac-cidentally. However, you can still be called and you can still make an emergency call.Direct call(Phone-code protected)Only one phone number can be dialled (see also p. 34). Only ‚b(PIN2 or phone-code protected)Dialling options are restricted to SIM-protected phone numbers in the Phonebook. If only area codes are entered, relevant phone numbers can be added to these manually be-fore dialling.If the SIM card does not support PIN2 input, the whole Phonebook can be protected with the phone code.PIN codeFor description, see p. 24:PIN control, Change PIN, Change PIN2, Chg.phonecode This SIM only b(Phone-code protected)The phone can be connected to a SIM card once the phone code is en-tered. Unless the phone code is known the phone will not operate with a different SIM card. If the phone is to be used with a dif-ferent SIM card, enter the phone code when requested.Additional informationThe keypad can also be directly locked and unlocked in standby mode.In each case:#Press and hold.
101Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Security.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (101) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Barring bBarring restricts the use of your SIM card (not supported by all service providers). You need a 4-digit net-work password for network barring. Your service provider will give you this password. You may need to be registered separately for each barring.All outgoingAll outgoing calls except emergency numbers are barred.Outgoing intl.(International outgoing)Only national calls can be made.Out.int.x home(International outgoing without home country)International calls are not permitted. However you can make calls to your home country when abroad.All incomingThe phone is barred for all incoming calls (forwarding all calls to mailbox provides a similar effect).When roamingYou do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.Status checkThe following information can be displayed after a status check:ÖBarring set.ÕBarring not set.ÔStatus unknown (e. g. new SIM card).Clear allAll barrings are deleted. A password which the service provider will give you is necessary for this function.
Settings102© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Network.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (102) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings NetworkC¢T¢Network¢Select function.Line bThis function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone.Select lineSelect the currently used phone number.\Display current phone number.Protected(Phone-code protected)You may limit usage to one phone number.Network infoThe list of GSM networks currently available is displayed.ÆIndicates non-authorised service providers (de-pending on SIM card).Choose netwrkNetwork search is restarted. This is useful if you are not on your home network or want to register on a dif-ferent network. The network list is re-built when Auto network is set.Auto network Activate/deactivate, see also Choose netwrk above. If “Automatic network” is activated, the next network on the list is dialled in ranking order of your “preferred networks”. Otherwise a different network can be selected manually from the list of the avail-able GSM networks.Preferred net Enter your preferred service provid-ers here for when you leave your home network (e.g. if there are dif-ferences in price).Additional informationSpecial settings may be made for each phone number (e.g., melody, call divert etc.) To do this, first switch to the required phone number. Switch from phone number/connection in standby mode:0Press. §Line 1§ Press.
103Settings© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Network.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (103) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Your service provider is displayed:§List§ Display list of preferred networks.Create/change entry: <Empty> or select an existing entry, then select a new service provider in the list and confirm.Record new service provider (last entry in the list):Furth.networkSelect, enter the provider data and save it.Band selection bSelect either GSM 900, GSM 1800 or GSM 1900.Fast searchWhen this function is active, net-work reconnection is speeded up (standby time is reduced).User group bDepending on the service provider, you can create groups with this ser-vice. These can have access to inter-nal (company) information, for ex-ample, or special rates apply. Please check with your service provider for details.ActiveActivate/deactivate function. “User group” must be deactivated for nor-mal phone use.Select groupYou can select or add groups other than preferred groups (see below). Code numbers for the groups are ob-tained from your service provider.All outgoingIn addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted.Pref. groupIf activated, calls may only be made within this standard user group (depending on the network configuration).Additional informationIf you are outside your home network, your phone automatically dials another GSM network.If the signal strength of the preferred net-work is inadequate when you switch on the phone, the phone may register in a differ-ent network. This can change when the telephone is next switched on or if another network is selected manually.
Settings104© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SetupAccessory.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (104) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Settings AccessoriesC¢T¢Accessories¢Select function.Car KitOnly in combination with an original Siemens handsfree car kit (see p. 140). The car kit profile is activat-ed automatically when the phone is inserted into the cradle.Auto answer (factory default: off)Calls are accepted automatically af-ter a few seconds. Eavesdropping is possible!ÅShown on the display.Automatic switch off(factory default: 2 hours)The phone is powered by the car's power supply. You can adjust the time between switching off the igni-tion and the time at which the phone switches off automatically.Car loudspk.Improves playback in certain circumstances.Automatic settings• Permanent illumination: switched on.• Key lock: switched off. • Charging the phone battery.• Auto. activation of the car kit pro-file when phone is inserted in the cradle.HeadsetOnly in conjunction with an original Siemens headset (see p. 139). If an original Siemens headset is used the profile is automatically activated when the headset is plugged in. Auto answer (factory default: off)Calls are accepted automatically af-ter a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset. Automatic settingAccept call with Call key or PTT key (Push-To-Talk), even when the auto key lock is activated.Auto answerIf you do not notice that your phone has ac-cepted a call, there is the danger that the caller may eavesdrop.
105My menu© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyMenu.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (105) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)My menuCPress.§My menu§ Press.Create your own menu with fre-quently used functions, phone num-bers or Internet pages. The list of 10 entries is preset. You can, however, change it as you wish.UseISelect the required entry.CConfirm.Or AIf the entry selected is a phone number, you can also dial it with the Call key.Change menuYou can replace each entry (1–10) with another entry from the selec-tion list.ISelect the required entry.§Change§ The function list is opened for selection.ISelect the new entry from the list.CConfirm. The entry is saved.If Phonebook is selected, the phone number must also be selected; if Internet is selected, the bookmark must also be selected.Reset all(Phone code required)§Reset all§ Select. After a security prompt, the pre-assign-ment is reset.
Fast access106© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FastDial.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (106) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:20)Fast accessYou can assign one important phone number or function to each of the two softkeys and number keys 2 to 9 (speed-dial numbers). The phone number can then be dialled or the function can be started at the touch of a button. SoftkeysChangeFor example, the Internet function is assigned to the softkey. To change this (in standby mode):§Internet§ Press briefly.§Change§ Scroll to new assignment in the list.CConfirm.• Special case Phone number. Choose a name from the Phonebook/Addressbook for assignment to the key.•Special case Bookmark. Scroll to a URL in the bookmark list for as-signment to the key.ApplyIn standby mode:ApplicationThe “Internet” is just used as an example here.§Internet§ Press and hold; the appli-cation is started.Phone numberThe assignment “Carola” is used here only as an example.§Carola§ Press and hold. The phone number is dialled.Additional informationThe service provider may have already as-signed functions to a softkey (e.g. access to “SIM services” or direct call-up of the Inter-net portal). It may not be possible to modify this key assignment.The left softkey may sometimes be re-placed automatically by p/À to access a new message for example.Z £  XService provider01.05.2005 10:10Internet ì Help
107Fast access© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FastDial.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (107) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:20)Speed dialling keysNumber keys 2 to 9 can be used as speed dialling numbers for fast ac-cess. Number key 1 is reserved for the mailbox phone number (p. 68) and number key 0 is reserved for switching between two connections during use (p. 102).ChangeIn standby mode:3Press number key briefly (e.g. the 3). If this number is still free:§Set§ Press.Select a new function from the list and confirm with §OK§.Or If an assignment has al-ready been made to this key (assignment dis-played above the right softkey): e.g. Games.§Games§ Press briefly.§Change§ Scroll to application in the list.CConfirm.• Special case Phone number. Choose a name from the Phonebook/Addressbook for assignment to the key.•Special case Bookmark. Scroll to a URL in the bookmark list for assignment to the key.ApplySelect a stored phone number or start a stored application (e.g. Calendar).In standby mode:3Press briefly.The assignment of the number key 3 is displayed above the right softkey e.g.:§Calendar§ Press and hold.Or simply 3Press and hold.
Organizer108© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (108) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)OrganizerCalendarC¢Q¢CalendarYou can enter appointments in the calendar. Time and date must be set for the calendar to work correctly.The calendar offers you three views:Monthly viewSpecial colour coding:Day with entries for appointments, day-long appointments, weekends.Navigation:FOne day forward/back.IOne week forward/back.CDaily view open.Weekly viewSpecial displays:Appointments are shown as a hori-zontal colour bar on the vertical hour division.Navigation:FOne day forward/back.IForward/backward by the hour through the day.Daily viewSpecial displays:Description of appointment. Navigation:FOne day forward/back.ITo the start/end of the day or next/last entry.Calend. setupC¢Q¢Calend. setupStart of day:Time when the working day begins.Start of week:Weekday on which the monthly and weekly view on the left starts.WeekendSet the days for the weekend.Show birthdays:Shown in the displaySynchronising with a PCWith the mobile phone manager (p. 130) you can synchronise appointments, tasks and memos with Outlook® or Lotus Notes™.
109Organizer© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (109) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)AppointmentsC¢Q¢AppointmentsAppointments are displayed in chro-nological order in a list.Enter new appointment<New entry>Select.Category:cMemo Text input for description.dVoice memo Enter voice memo. Shown with alarm.eCall Enter phone number to be displayed with the alarm.fMeeting Text input for description.gVacation Enter start and end date.hBirthday Enter name and date.Different input/selection fields are displayed depending on the type. The number of fields can be restrict-ed, see Default, p. 110. Description:Description of nature of appointment.Phone number:Enter a phone number or select one from the Addressbook.Voice memo:Enter a voice recording, see Dictat.machine, p. 112.Location:Location of appointment.Whole day:All-day appointment: Yes/NoStart date:Date when appointment starts.Start time:Time when appointment starts.End date:Date when appointment ends.End time:Time when appointment ends.
Organizer110© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (110) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Alarm:On/off or Silent alert.JEnter the period of time before the appointment and select the time unit:Minutes, Hours, DaysRecurrence:Select a timeframe for repeating the appointment:No, Daily, Weekly, Monthly, YearlyEnter a parameter for repeating:Forever, Until, Events (number)If Weekly is selected, certain week-days can be highlighted. All fields/Reduced fieldsIn the list, select those fields which are to be offered for future entries.Information on the alarmWhen the set date and time are reached there is an audio and a visu-al alarm. If an alarm is missed it ap-pears in the list of missed appoint-ments (p. 111).Alarm type Memo:Meeting: The text is shown in the display.Alarm type Call: The phone number is displayed and can be dialled im-mediately.Alarm type Birthday: You can send special birthday greetings by SMS, MMS, e-mail or a call via §Options§. Use Pause to set the alarm to repeat.TasksC¢Q¢TasksA task is displayed like an appoint-ment in the agenda of the selected day. However, unlike an appoint-ment it does not require a time. When no time is entered the task ap-pears at the top of the list every day until it is marked as completed.The entries are made in the same way as Appointments (see “Appoint-ments”). Then:Status:Select Done or Outstanding.Additional informationDisplay above set alarms:¹Alarm clock»AppointmentAn alarm sounds even when the phone is switched off (except in aircraft mode, p. 83). The phone does not go to standby mode. Press any button to switch the alarm off.
111Organizer© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (111) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Priority:Select 5 levels from Lowest to Highest. Date used:If activated with Yes, the following time input option is offered.Date due:/Due time:Enter the date and time by which the task is to be completed.Alarm: As for Appointments.NotesC¢Q¢NotesWrite and manage brief text notes.Enter a new note<New entry>Select.JEnter text. The first line is displayed as a “title” in the notes list. Total length: max. 160 characters.§Options§ Open menu.Save Save note. When Confiden-tial is selected, a note is protected with the phone code.Missed appts.C¢Q¢Missed appts.Events with an alarm (Appointments, Tasks) to which you have not reacted are listed for reading.Organiser optionsDepending on the application used (Calendar, Appointments, Tasks, Notes) and the current situation, different functions are offered.§Options§ Open menu.Delete  Delete entry.Delete by Delete all entries prior to a certain date.Delete all Delete all entries after confirmation.Delete done Delete all completed tasks.Activate/Deactivate Switch alarm on/off.Filter Display all entries with the selected feature.Confiden-tial Protect note with phone code. We recommend that you do not store any pass-words (PIN, TAN etc.) as notes.(For standard functions see p. 22)
Organizer112© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (112) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Dictat.machineC¢Q¢Dictat.machineUse the dictating machine to record short voice memos. • Use your phone as a dictating ma-chine when on the move.• Record a memo as a reminder or as a note for others.• Add a voice memo to an appoint-ment in the calendar.New recording<Record again>Select.The remaining time avail-able, as well as the record-ing time, are shown in the display.CA brief beep sounds when the recording starts. Now dictate the text.CSwitch between pause/record.DEnd recording.The recording is automat-ically saved with a time stamp.Rename with §Options§.PlaybackISelect the desired recording.CSwitch between playback/pause.D/EPress and hold for rapid re-wind and fast forward.Dictating machine options§Options§ Open menu.Handsfree Playback through the built-in loudspeaker.(For standard functions see p. 22)
113Organizer© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (113) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Time zonesC¢Q¢Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired time zone.City listISelect a city in the select-ed time zone.Time zone options§Options§ Open menu.Set Specify the time zone.Auto time zone = The time zone is switched automatically to local time by the network.Search city Search for a city.Help Operating instructions.
Extras114© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (114) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)ExtrasSIM services (optional)C¢S¢SIM servicesYour service provider may offer spe-cial applications such as mobile banking, share prices, etc. via the SIM card.If you have such a SIM card, the SIM services will appear in the main menu under “Extras” or directly above the softkey (on the left).USymbol for SIM services.Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone can support future addi-tions to your service provider's user package. For further information, please contact your service provider.Music playerC¢S¢Music playerWith the Music Player, you can play music files, e.g. in AAC format, and group together several tracks as a playlist. Music files and playlists are stored by default in My stuff/Sounds. Music files can, for example, be downloaded from the Internet or transferred to the telephone via a PC connection (p. 20).Playing musicYou can play music by• Starting the Music player and se-lecting a track or a playlist.• Selecting a music file directly from My stuff and opening it. #Press and hold to lock/un-lock keypad, when a mu-sic file is playing.DisplaysMusic Player entries appear in the following order:Folder – Playlists – Music filesNew play list<New Play list>Select.JEnter a name for the playlist.ISelect the required track.Repeat the process until the playlist is complete.
115Extras© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (115) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Music Player options§Options§ Open menu.Different functions are offered depending on the situation.PoC bThis application can be used to si-multaneously connect multiple sub-scribers. Like a normal Walkie-Talkie, only one subscriber can speak at a time. The others can only listen until the speaker allows others to talk.A recipient is selected using their PoC address (PoC ID) or their phone number. Groups created in advance (p. 118) can be invited to a session. Your service provider will supply you with your own PoC address.The recipient can also use a mobile phone, as well as a PC with an Inter-net connection and headset (de-pending on service provider). To use the application, GPRS (p. 94) must be switched on and PoC (p. 120) activated. Preparing a sessionFrom the AddressbookHOpen Addressbook (in standby mode).ISelect an entry with a PoC ID(Com. services).bThe session with the se-lected subscriber is start-ed. For details of how to invite additional subscrib-ers, see p. 116.From standby modeC¢S¢PoC<New session>Select. The possible functions as well as already added subscribers are displayed.You have several options to combine the subscribers:Shuffle Random playback of tracks in the current directory.Repeat Repeat tracks in a playlist.New play list Create a new playlist.Add to play list Add a track to the playlist.Properties Display information about a track or a playlist.(For standard functions see p. 22)
Extras116© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (116) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)<Add from d>ISearch and mark recipient in Addressbook.CAdd recipient.Or <Add f. sess.>ISelect a subscriber from an earlier session. Or <Enter ptt ID>JEnter PoC ID of a recipient.§Selection§ Add entries.Or <Add from grp>ISelect group.COpenISelect and mark recipient.§Selection§ Add recipient.Starting a sessionIf all the desired subscribers are com-bined, start the session:bThe subscribers are dis-played, and the autho-rised speaker is shown in bold.Speaking rights The list of subscribers is displayed. The current authorised speaker is shown in bold.bRequest speaking rights. The delegation of speak-ing rights is displayed and then the requester can talk.bReturning speaking rights.Inviting additional subscribers You can invite additional subscribers during a session. §Options§ Open menu, select Invite and mark new subscribers.You are being invitedThe invitation is shown in a window. You can accept/refuse this invitation.CAccept the invitation.The list of subscribers is displayed.Additional informationDepending on the setting for Hold mode (p. 120) b must be pressed and held as long as one speaks.If the person with speaking rights takes a long pause, the speaking rights are auto-matically released again.
117Extras© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (117) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Leaving the session and endingOnly if you yourself started the session.§Options§ Open menu.End session Select. You will leave and end the current session.Letting the session run in the backgroundThe current session remains open in the background and you can listen to the calls. A phone call ends the session.BPress and hold. Request speaking rights:bPress.View the session again:C¢S¢PoC ¢SessionsPoC options§Options§ Open menu.Different functions are offered depending on the situation.History view Display of subscribers in order of speaking.Session view Display of subscribers for the current session.End session End session.Session details Start time, Status, Duration, Type etc.User details Display subscriber prop-erties (see also My presence, p. 119).Add to dSave PoC ID in Address-book.Invite user Invite a subscriber to a session.Add to group Add subscriber to the group.Clear Delete the list except for the last entry.Handsfree Switch on handsfree talk-ing (loudspeaker).Request pres. Request information about the readiness to re-ceive for a subscriber.Volume Set volume. I is also possible.(For standard functions see p. 22)
Extras118© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (118) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)SessionsC¢S¢PoC ¢SessionsDisplay subscriber list for the current session. The authorised speaker is shown in bold.Records C¢S¢PoC¢RecordsSelect the list of received and made PoC calls as well as the option to de-lete all lists.You can mark subscribers for one session in the list.bStart session.The function Save as group in §Options§ can be used to combine entries in the list into a new group.GroupsC¢S ¢PoC¢GroupsOnly your groups are displayed and can be edited.Setting up a new group<New entry>Select.JFill in input fields:PoC ID: Subscriber ID.Name: Group name.Type Now or Chat.Max users: Maximum number of group members ("0" means "no limit").Membership:Set if membership in this group is open to everyone (Open) or if the subscriber is limited to the member list (Limited).Memberlist Add member to the group.Reject list List of subscribers which may not become mem-bers of this group.§Save§ Save group.
119Extras© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (119) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)<Rejectlist>List of subscribers with whom a session is not desired. Invitations from this list are always refused automatically.<Acceptlist>List of subscribers whose invitation is automatically accepted (see also Auto answer p. 119).Starting a session (group conversation)ISelect group.bStart session.Viewing group propertiesISelect group.CView properties.§Options§ Open menu. My presenceC¢S¢PoC¢Presence¢My presenceThe following properties (yours) can be set:InterruptionAllow, forbid interruptionMood Display your mood.Notes Note.SettingsC¢S¢PoC¢SettingsSome settings must be made by the user or can be copied from your ser-vice provider.ISelect and confirm the function, area.Load settingsDownload settings from the server of the service provider.PoC onlineLog in/out, status information for login.Block PoC callsAllow/block PoC calls.Auto answerAutomatically accept invitations be-cause of the Accept list (p. 119).Use Acc.& Rej.Activate/deactivate the use of Accept list/Reject list (p.119/p.119).Add to dCopy group ID to the Addressbook.Edit Edit (your own) group.Copy ID to clip Save group ID (PoC ID) in the clipboard.Memberlist Display the member list.Reject list Display the refused subscribers.
Extras120© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (120) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)PoC •PoC enabled Activate/deactivate PoC.•History length: Number of entries in the list.•Timeout(min.): PoC is put in the background if not used after an adjustable amount of time.•Hold mode Depending on the setting, b must be pressed and held to speak. •Default view Session view or History view.•Request pres. The saved properties are dis-played.ServerSettings for the server. Please check with your service provider.AdvancedFurther settings. Please check with your service provider.Alarm clockC¢S¢Alarm clockThe alarm will ring at the time set by you, even when the phone is switched off. §Edit§ Press to set.FActivate/deactivate the alarm.HSwitch to time setting.JSet alarm call time (hh:mm).HSwitch to week days.FNavigate to the various days.CDisplay options: alarm call time and days.Additional informationIf an accessory such as the car kit is con-nected, its PTT key also functions as aPoC-key.éAlarm clock¹ §On§ 07:30Mo Tu We Th Fr Sa SuEdit ì OK
121Extras© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (121) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)CSet days for alarm calls. Press again to delete the highlighting.Press and hold to high-light/unhighlight all the days.§OK§ Confirm setting.Sound recorderUse the sound recorder to record noises and sounds for use as ring-tones. The sound recorder is usually started from other applications/func-tions such as assigning a ringtone.New recordingStart from main menuC¢S¢Sound recorderor also start from another application:<Record again>Select.The remaining time avail-able, as well as the record-ing time, are shown in the display.CA brief beep sounds when the recording starts. CSwitch between pause/record.DEnd recording.The recording is saved with a timestamp in the Sounds folder.Rename with §Options§.If starting from another application, e.g. create MMS:§Insert§ Transfer the recording into the application.PlaybackISelect the desired recording.CSwitch between playback/pause.D/EPress and hold for rapid re-wind and fast forward.§Options§ Open menu.Additional information¹Screen display in standby mode: alarm clock activated.Use Pause to set the alarm to repeat.Handsfree Playback through the built-in loudspeaker.Set as... Set the recording as a ringtone.(For standard functions see p. 22)
Extras122© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (122) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)CalculatorC¢S¢CalculatorThe calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the ma-trix with the calculation functions) are located in the top half of the display. JEnter digit(s).F/INavigate functions.CUse function.JEnter digit(s).CUse function. The result is calculated and displayed immediately.Calculator options§Options§ Open menu.Basic functions+, -, *, / Basic calculation types=Result1/x Reversion%Convert to percentage.Decimal point.±Sign change “+”/“–”§Options§ Expansion of the range of functions: Square rootSquareeExponentMS Save displayed numberMR Call up saved numberM+ Insert number from memoryxx2Convert Call up the unit con-verter with the current result.Clear all Delete all units.Extended mode/Basic mode Convert calculation functions.Memory save, Memory recall, Memory clearSave or recall result; delete memory.(For standard functions see p. 22)
123Extras© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (123) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Unit converterC¢S¢Unit converter You can convert various measure-ment units into other measurement units.The following types are offered with various units: Example for Velocity units: Converting the units/currencyFSelect the source unit/currency.HSwitch to the input field.JEnter the quantity to be converted. HSwitch to the selection field.FSelect the target mea-surement unit/currency. The result is displayed.You can use both input fields alternately. COpens the calculator with the current converted value.Special key functions:*Set decimal point.#Change sign. CurrencyWhen you call up the function, you must enter a base currency into which the conversions are to be made. JEnter currency (e.g. Euro).§Save§ Store entry.Now enter the name and exchange rate of the currency to be converted. §Options§ Open menu.Velocity Energy Mass Pressure Time Volume Area Length Power Temperature Currency Type UnitsVelocity Kilometers/h, Meters/sec, Miles/h, Miles/sec, Knots, Mach Add currency Enter new currency and exchange rate.Set as base Use entered currency as base currency.Edit rate Change the exchange rate of the base currency.Calc. Start calculator.(For standard functions see p. 22)
Extras124© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (124) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)StopwatchC¢S¢StopwatchTwo intermediate times can be recorded and saved. Display, also in standby mode.§Start§/§Stop§*Save intermediate time.After a stop:§Reset  Reset to zero.Stopwatch options§Options§ Open menu.CountdownC¢S¢CountdownA set time elapses. The last 3 sec-onds are indicated by a beep. At the end a special beep sounds. Display, also in standby mode.If no time has been entered:COpen input window.JSet period of time.CConfirm.CStart countdown.If a countdown time is specified:CStart countdown.While the time is elapsing:CInterrupt counter.CLet counter continue running.§Reset§ Reset counter to starting time.§Edit§ Enter new period of time and confirm with §OK§.Stopwatch list Display saved entries.(For standard functions see p. 22)
125Extras© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (125) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Remote synchronisationC¢S¢Remote sync.You can use this function remotely to access externally filed data (ad-dresses, calendar, etc.) and synchro-nise these with the data on your phone. The data can, for example, be saved on a company computer or the Internet e.g.:www.siemens-mobile.com/syncmlSynchronise§Sync§ The computer is selected and synchronisation start-ed. When completed, the actions which have been performed are displayed.§Next§ Scroll through the various displays.Sync. settingThe following settings can be made prior to synchronisation:Active profileYou can choose between 5 profiles. ISelect profile.CActivate profile.Or §Edit§ Set profile.Server sett.Last sync:Time of the last synchronisation.Sync. mode•Sync data: Modified data or All data •Sync instruction: Two-way, Device up-date or Server update Sync items: Highlight database areas to be synchronised:Calendar, Contacts, Notes, Tasks CSave settings.Providers Display the current service provider.Homepage: e.g. www.siemens-mobile.com/syncml Port: Enter port number e.g. 80.User name: Enter user name (login name).Password: Enter password (shown as a series of asterisks).Calendar path:, Contacts path:, Notes path:, Tasks path:HTTP au-thentica-tion.Confirmation required;Yes/No (if No, the input fields are not visible).HTTP name: Enter name.HTTP password: Enter password.
Extras126© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (126) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Device manag.C¢S¢Device manag.If you were informed about software updates by a push message, you can establish a connection to the provid-er's server using the Device manag-er, so you can download them. When downloading is finished, you will be asked to switch the phone off and on again. Afterwards, the soft-ware of your phone will be updated. Please follow the instructions in the display.The phone default setting varies from service provider to service pro-vider:• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then se-lect and activate profile.• The access profiles must be con-figured manually. If necessary, check with your service provider for details. You will find the cur-rent settings for the service pro-vider on the Internet at www.siemens.com/mobilephonescustomercareunder "FAQ".Active profileA standard profile for downloading the current software of the operat-ing system is displayed. §Sync§ Establish a connection to the active profile.Or§Edit§ Call up profile list.ISelect profile.CActivate profile.Or§Edit§ Set profile.Last connect.Display last connection.
127Media player© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MediaPlayer.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (127) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Media playerThe Media Player is started by the ap-plication if you play a media file that has been received by SMS/MMS or downloaded from the Internet. FPress briefly to scroll to the next media file.0–9Switch on display illumination. PicturesThe following functions can be ap-plied to a displayed picture:CZoom function if the dis-played picture has a high-er resolution than the display. FThe joystick moves the picture detail.5 Centre the picture.#Switch to full screen mode and back again.§Send§ Send via MMS or e-mail, for example.Melodies/playlists/videoThe media playback offers the fol-lowing functions for music, playlist and video playback:CPlay or stop, depending on the situation.ISet volume.*Switch to mute.§Stop§ Pause function.BEnd playback.Options§Options§ Open menu.Different functions are offered de-pending on the starting situation and the object.Volume Set the volume with the joystick.Set as... Set picture as Wallpaper, Logo, for example, and sounds, for example, for Incoming call, Startup melody.Slideshow Automatic run-through in full screen mode. Change individual picture with joystick.Edit Access to picture editing.(For standard functions see p. 22)
My stuff128© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyStuff.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (128) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)My stuffTo organise your files, you can use the file system like a PC file manager. There are separate folders for the various data types in My stuff. If, for example, you want to download new pictures or sounds, the down-load function is contained in the rel-evant folder.Remember that pictures and sounds may be protected (DRM, p. 20).C¢N The list of the folders and files is displayed. The first entry in My stuff is always the RS MultiMediaCard (p. 129). NavigationISelect file/folder in lists.F/IThe cursor can be moved as required in the preview.COpen folder and start download or start file with the related application.My stuff options§Options§ Open menu.Move Place highlighted file(s) or folder in temporary memory.Copy Place highlighted file(s) or folder in temporary memory.Paste Transfer content of tempo-rary memory into current folder. New folder Create a new folder and name it.Preview/List view Switch over to miniature view/view of list.Properties Display information on file or folder selected.Format card Format inserted RS MultiMediaCard.Eject card Allows the RS MultiMedia-Card to be removed with-out loss of data. (For standard functions see p. 22)
129My stuff© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyStuff.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (129) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Directory structureSeparate folders have already been created for different data types inMy stuff. These folders cannot be changed. RS MultiMediaCardThe RS MultiMediaCard gives your phone a very large memory capacity. This allows you to save picture/video files, and sound recordings, for example. However, you can also use this memory card like a floppy disk to save any other files you may wish to save.C¢N¢C The list of the folders and files is displayed. The first entry is always My stuff. The folders and files on the memory card are managed in the same way as in My stuff. If the memory card as-signs a file to a function in the phone such as a ringtone, this is copied to My stuff.Folder Description FormatMultiMedia-Card Access to the cardPictures Pictures bmpbmxjpg/jpegpnggifVideos Videos 3gpAnimations Start up/shut down animationsbmxgifSounds Melodies, music mp3m3uaac(+)midamrwavTopics Loaded theme (zipped)Theme configura-tion (unzipped)sdtstcColor skins Colour skins for the user interfacescsGames Java archiveDownload infojarjadApplica-tions Applications *Other Text modulesVoice recordingstmovmoDepending on the service provider, the structure, content and range of functions in My stuff may vary.Additional informationRS MultiMediaCard is a trademark of the MultiMediaCard Association.Changing the RS MultiMediaCard (p. 17)New RS MultiMediaCard™1. Create a backup copy on a PC of the data on the old memory card.2. Format the new memory card.3. Copy the data from the PC onto the new memory card.
Mobile Phone Manager130© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneManager.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (130) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Mobile Phone ManagerThe Windows® PC program, Mobile Phone Manager, enables you to use extended phone functions from your PC. For example, you can update your Addressbook in the phone, read, save and send SMS and MMS messages, or synchronise your phone with Outlook® or Lotus Notes™. The phone and PC communicate via a data cable (see p. 139). You can download the software from the Internet: www.siemens.com/m75Contacts managementYou can use contacts management to manage the personal contacts you have stored in your phone, to add new ones and to delete and edit them. You can compare and copy contacts between your phone, Outlook®, Lotus Notes™ and other Siemens phones (including Gigaset).SMS and MMS management (messages)Write MMS and SMS messages from the convenience of your PC. Use all the options your PC offers you and use your sounds and pictures to cre-ate MMS and EMS messages. You can read, forward, print, delete and archive your messages.Backup and restoreWith the back-up function, you can regularly make a back-up copy of your telephone data on the PC. If you ever lose the data on your phone or replace the phone, you can quickly re-instate all data with the restore function. Please observe any possi-ble restrictions for DRM-protected data (p. 20).
131Mobile Phone Manager© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneManager.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (131) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Bookmark management (browser & bookmarks)Use your PC to browse through the Internet and define your preferred sites. Save the Internet addresses as bookmarks on your phone so that you can quickly call them up at a lat-er time when you are on the move. Phone explorerYou can use the phone explorer to read your phone’s file system. Files such as pictures, sounds and much more can easily be copied between the phone and PC by dragging and dropping.GPRS modemThe GPRS modem establishes an In-ternet connection via your mobile phone so that you can surf the Inter-net on your laptop while on the move and at the touch of a button. Processing pictures and photos (images)Picture/photo processing offers the user the opportunity to conveniently create, edit and manage pictures and photos. Filters and effects are offered to help create colourful, at-tractive graphics. The user-friendly interface makes child’s play of trans-ferring pictures/photos from or to the mobile phone, and of changing the graphic settings.Ringtone management (sound)The sound module allows the user to manage nearly all sound formats easily and to save them on the phone.
Questions & Answers132© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FAQ.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (132) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Questions & AnswersIf you have any questions on the use of your phone, you can contact us atwww.siemens.com/mobilephonescustomercare around the clock. As further help we have listed below some frequently asked questions and answers.Problem Possible causes Possible solutionPhone cannot be switched on.On/Off key not pressed long enough.Press On/Off key for at least 2 seconds.Flat battery. Charge battery. Check charging indicator in the display.Battery contacts dirty. Clean contacts.See also below under “Charging error”.Standby time is too short.Frequent use of organiser and games.Restrict use if applicable.Fast search activated. Deactivate speed search (p. 103).Display illumination switched on. Switch off display illumination (p. 86).Unintentional keystrokes (illumi-nation!).Activate key lock (p. 100).Charging error (charge icon not displayed).Battery totally discharged. 1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours.3) Charge battery.Temperature out of range: +5 °C to +40 °C.Make sure the ambient temperature is right, wait for a while, then recharge.Contact problem Check power supply and connection to the phone. Check battery contacts and telephone connection socket, clean them if necessary, then insert battery again.No mains voltage. Use different mains power socket, check mains voltage.Wrong charger. Only use original Siemens accessories.Battery faulty. Replace battery.SIM error. SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 16).Dirty SIM card contacts. Clean SIM card with a dry cloth.SIM card with wrong voltage. Use 1.8 or 3 V SIM cards only.SIM card damaged (e.g. broken).Carry out a visual check. Have service provider change the SIM card.
133Questions & Answers© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FAQ.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (133) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)No network connection.Weak signal. Move higher, to a window or an open space.Outside GSM range. Check service provider's coverage area.Invalid SIM card. Complain to the service provider.New network not authorised. Try manual selection or select a different network (p. 102).Network call barring is set. Check network barrings (p. 101).Network overloaded. Try again later.Phone loses network. Signal too weak. Reconnection to another service provider is automatic (p. 102). Switching phone off and on again can speed this up.Calls not possible. Second line set. Set first line \ (p. 103).New SIM card inserted. Check for new barrings.Charge limit reached. Reset limit with PIN2 (p. 46).Credit used up. Load credit.Some calls not possible.Call restrictions are in place. Barrings can be set by service provider. Check barrings (p. 101).Impossible to make entries in Phonebook/Addressbook.Phonebook/Addressbook is full. Delete entries in the Addressbook/Phonebook (see standard functions, p. 22).Voice message not functioning.Call divert to mailbox not set. Set call divert to mailbox (p. 68).ã flashes to indicate an SMS.SMS memory full. Delete SMS messages (see standard functions, p. 22) or archive them (p. 53).ä flashes to indicate an MMS.MMS memory full. Delete MMS messages (see standard functions, p. 22).å flashes to indicate an MMS.Phone memory full. Delete messages, pictures, videos, games or applications.Function cannot be set.Not supported by service provid-er or registration required.Contact your service provider.Capacity problems with, for example, Games & More, ring-tones, pictures, vid-eos, SMS archive.Phone memory full. Delete files in the relevant areas. You can use the memory assistant to delete specific files (p. 91).No Internet access; downloading not possible.Profile not activated, profile set-tings wrong/incomplete.Activate or set browser profile (p. 78). If neces-sary ask your service provider.Problem Possible causes Possible solution
Questions & Answers134© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FAQ.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (134) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Text message cannot be sent.Service provider does not sup-port this service.Contact your service provider.Phone number for service cen-tre not set or incorrectly set.Set service centre (p. 55).SIM card contract does not sup-port this service.Contact your service provider.Service centre overloaded. Repeat message.Recipient does not have a com-patible phone.Check.EMS pictures are not displayed on the desti-nation phone.Destination phone does not sup-port the EMS standard.No Internet access possible.Incorrect browser profile set, or wrong or incomplete settings.Check browser settings (p. 78), or contact your service provider.PIN error/PIN2 error.Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If you have lost the PUK (MASTER PIN), contact your service provider.Phone code error. Three wrong entries. Contact Siemens Service (p. 135).Service provider code error.No authorisation for this service. Contact your service provider.Too few/too many menu entries.Functions may have been add-ed or deleted by the service pro-vider via the SIM card.Check with your service provider.No fax possible. Wrong settings in the PC. Check settings (p. 98).No authorisation for this service. Contact your service provider.Charge meter does not work.Charge pulse is not being trans-mitted.Contact your service provider.DamageSevere shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry connector contacts thoroughly. Stand mobile upright in an air current. Do not dis-mantle the phone!Problem Possible causes Possible solutionReset all settings to factory default, p. 92: * # 9 9 9 9 # A
135Customer Care© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Hotline.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (135) of M75 SIRIUS FUG en, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Customer CareQualified Siemens employees are waiting to offer you expert information about our products and installation.In some countries repair and replace servic-es are impossible where the products are not sold through our authorised dealers.If repair work is necessary, please contact one of our service centres:Abu Dhabi .........................................0 26 42 38 00Argentina .....................................0 80 08 88 98 78Australia..........................................13 00 66 53 66Austria.............................................05 17 07 50 04Bahrain .................................................... 40 42 34Bangladesh.......................................0 17 52 74 47Belgium.............................................0 78 15 22 21Bolivia ...............................................0 21 21 41 14Bosnia Herzegovina..........................0 33 27 66 49Brunei ................................................. 02 43 08 01Bulgaria............................................... 02 73 94 88Cambodia ........................................... 12 80 05 00Canada ........................................1 88 87 77 02 11Chile..................................................8 00 53 06 62China ...........................................0 21 23 01 71 88Colombia....................................01 80 07 00 66 24Croatia ..............................................0 16 10 53 81Czech Republic.................................2 33 03 27 27Denmark ............................................. 35 25 86 00Dubai ................................................0 43 96 64 33Ecuador ..........................................18 00 10 10 00Egypt.................................................0 23 33 41 11Estonia.................................................. 6 30 47 97Finland............................................09 22 94 37 00France.............................................01 56 38 42 00Germany ......................................0 90 01 00 77 00Greece ............................................80 11 11 11 16Hong Kong.......................................... 28 61 11 18Hungary ..........................................06 14 71 24 44Iceland .................................................. 5 11 30 00India.............................22 24 98 70 00 Extn: 70 40Indonesia .....................................0 21 46 82 60 81Ireland.............................................18 50 77 72 77Italy .................................................02 24 36 44 00Ivory Coast.......................................... 05 02 02 59Jordan...............................................0 64 39 86 42Kenya.................................................... 2 72 37 17Kuwait ................................................... 2 45 41 78Latvia .................................................... 7 50 11 18Lebanon.............................................. 01 44 30 43Libya ...............................................02 13 50 28 82Lithuania ...........................................8 70 07 07 00Luxembourg........................................ 43 84 33 99Macedonia .......................................... 02 13 14 84Malaysia....................................+ 6 03 77 12 43 04Malta.......................................+ 35 32 14 94 06 32Mauritius ............................................... 2 11 62 13Mexico .......................................01 80 07 11 00 03Morocco .............................................. 22 66 92 09Netherlands .................................0 90 03 33 31 00New Zealand...................................08 00 27 43 63Nigeria ..............................................0 14 50 05 00Norway................................................ 22 70 84 00We offer fast, individual advice! You have several options:Our online support on the Internet:www.siemens.com/mobilephonescustomercare We can be reached any time, any place. You are given 24 hour support on all as-pects of our products. Here you will find an interactive fault-finding system, a compila-tion of the most frequently asked ques-tions and answers, plus user guides and current software updates to download.When calling customer service, please have ready your receipt and the phone identity number (IMEI, to display press *#06#), the software version (to display, press *#06#, then §More§) and if available, your Siemens Service customer number.You will also find the most frequently asked questions and answers in the sec-tion entitled "Questions & Answers" in this user guide on (p. 132).
Customer Care136© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Hotline.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (136) of M75 SIRIUS FUG en, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Oman....................................................... 79 10 12Pakistan..........................................02 15 66 22 00Paraguay ..........................................8 00 10 20 04Peru ..................................................0 80 05 24 00Philippines ........................................0 27 57 11 18Poland.............................................08 01 30 00 30Portugal ............................................8 08 20 15 21Qatar....................................................04 32 20 10Romania .........................................02 12 09 99 66Russia..........................................8 80 02 00 10 10Saudi Arabia .....................................0 22 26 00 43Serbia .............................................01 13 07 00 80Singapore ............................................62 27 11 18Slovak Republic ..............................02 59 68 22 66Slovenia............................................0 14 74 63 36South Africa ....................................08 60 10 11 57Spain.................................................9 02 11 50 61Sweden.............................................0 87 50 99 11Switzerland .....................................08 48 21 20 00Taiwan ............................................02 23 96 10 06Thailand............................................0 27 22 11 18Tunisia .................................................71 86 19 02Turkey..........................................0 21 64 59 98 98Ukraine ........................................8 80 05 01 00 00United Arab Emirates........................0 43 66 03 86United Kingdom ...........................0 87 05 33 44 11USA .............................................1 88 87 77 02 11Venezuela....................................0 80 01 00 56 66Vietnam...........................................84 89 20 24 64Zimbabwe ............................................04 36 94 24
137Care and maintenance© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Maintenance.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (137) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Care and maintenanceYour phone has been designed and crafted with great care and attention and should also be treated with care. The suggestions below will help you to enjoy your phone for many years.• Protect your phone from moisture and humidity! Precipitation, hu-midity and liquids contain miner-als that will corrode electronic circuits. Should your phone none-theless become wet, disconnect it immediately from any power sup-ply and/or remove the battery, and leave the open phone to dry at room temperature!• Do not use or store the phone in dusty, dirty areas. Its moving parts may become damaged.• Do not store your phone in hot ar-eas. High temperatures can short-en the life of electronic devices, damage batteries and warp or melt certain plastics. • Do not store your phone in cold ar-eas. When the phone warms up again (to its normal ambient tem-perature), moisture can form in-side the phone, which may damage electronic components. • Do not drop, knock or shake your phone. Rough handling can damage components inside the device!• Do not use harsh chemicals, clean-ing solvents, or strong detergents to clean the phone!The suggestions given above apply equally to your phone, battery, charger and all accessories. If any of these parts are not working properly, take them to your nearest qualified service outlet. The personnel there will assist you and, if necessary, re-pair the device.
Product data138© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Data.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (138) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Product dataDeclaration of conformitySiemens Information and Communi-cation mobile hereby declares that the phone described in this user guide is in compliance with the es-sential requirements and other rele-vant provisions of European Direc-tive 1999/5/EC (R&TTE). The declaration of conformity (DoC) con-cerned has been signed. Please call the company hotline if you require a copy of the original or visit:www.siemens.com/mobiledocs Technical data Operating timesThe operating time depends upon the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time. Avoid placing the phone in the sun or on a heater.Talktime: up to 300 minutesStandby time: up to 250 hoursGSM class: 4 (2 watt)Frequency range: 880– 960 MHzGSM class: 1 (1 watt)Frequency range: 1,710– 1,880 MHzGSM class: 1 (1 watt)Frequency range: 1,850– 1,990 MHzWeight: 110 gSize: 110.5 × 51.5 × 21 mm (104 ccm)Li-Ion battery: 750 mAhOperating temp.: –10 °C to +55 °C(+14°F to +131°F)SIM card: 1.8 or 3.0 VPhone IDYou will need the following information if you lose your phone or SIM card: the number of the SIM card (on the card):..............................................................15-digit serial number of the phone (under the battery):..............................................................the customer service number of the service provider:..............................................................Lost phoneIf you lose your phone or SIM card contact your service provider immediately to pre-vent misuse.Action taken Time (min)Reduction of stand-by time byCalling 1 30 – 90 minutesLight * 1 40 minutesNetwork search1 5 – 10 minutes* Key input, games, organiser etc.
139Accessories© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Accessory.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (139) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)AccessoriesFashion & CarryCarrying CasesA range of carry cases is available at spe-cialist shops or you can visit the Siemens Mobile Store online at:EnergyLi-Ion Battery (750 mAh) EBA-660Spare battery.Travel ChargerTravel Charger EU ETC-500tTravel Charger UK ETC-510Travel charger with an extended input voltage range of 100–240 V.Car Charger Plus ECC-600Charger for the cigarette lighter socket in the car. It is possible to make phone calls during charging.Handsfree portableHeadset Basic HHS-500Simple headset without PTT (Push-To-Talk) keyHeadset HHS-510 Headset with PTT (Push-To-Talk) key to accept and end calls.Headset Purestyle HHS-610 High quality headset with removable ear-piece and PTT (Push-To-Talk) key.Headset Stereo HHS-700Stereo headset with PTT (Push-To-Talk) key for listening to music and making calls.Headset Bluetooth®HHB-600 with EU power supply unitHHB-610 with UK power supply unitHHB-620 with Australian power supply unitElegant, small, easy to wear Bluetooth headset.OfficeData Cable DCA-500For connecting the phone to the serial RS232 port of the PC.Data Cable USB DCA-510For connecting the phone to the USB port of the PC. With charging functionData Cable USB DCA-540For connecting the phone to the USB port of the PC. Siemens Original Accessorieswww.siemens.com/shop
Accessories140© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Accessory.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (140) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)MultitainmentFlash IFL-600Plug-in flash module for taking photos in areas with low ambient light.Mobile Music Set IMS-700The portable Mobile Music Set allows to lis-ten to the music of the mobile phone in ex-cellent sound quality everywhere and share it with others via active loudspeakers.Bike-o-Meter IBS-700The innovative Bike-o-Meter with additional water protection cap for non-outdoor phones and included altimeter combines a robust and handy cradle for the mobile phone with a powerful bike computer.Car Solutions Mobile Holder Antenna HMH-710The cradle for connecting an external anten-na. Ideal for use with headset or car kit portable.Can also be used as cradle for retrofitting your handsfree car kit (series 55).Car Kit Comfort Basic HKC-710 Handsfree kit with first-class digital call qual-ity and supreme ease of use. The phone specific Mobile Holder Antenna is necessary in additionCar Kit Easy HKP-700Facilitates convenient handsfree talking with high call quality. With the integrated, rotating cradle and the flexible microphone position-ing, the telephone can be optimally adjusted to suit any vehicle interior. The power is sup-plied via the cigarette lighter socket.Car Kit Portable HKP-500With the Car Kit Portable hands-free com-munication is easily transferred from one vehicle to the next. Simply plug into the ciga-rette lighter, connect and speak.Car Kit Bluetooth® Portable HKW-700Bluetooth high-tech handsfree kit without cable connection to the mobile phone. Plugs into cigarette lighter socket – no installation effort.Car Kit Bluetooth® HKW-600Innovative Bluetooth handsfree kit with an external display for making in-car calls safely and conveniently.Optional car kit accessoriesCar Data Adapter HKO-690Phone-In Adapter Cable HKO-570Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online: Siemens Original Accessorieswww.siemens.com/shop
141SAR (M75)© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_SAR.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (141) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)SAR (M75)RF EXPOSURE/SPECIFIC ABSORPTION RATE (SAR) INFORMATIONTHIS SIEMENS M75 PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO ELECTROMAGNETIC FIELDS.Your cell phone is a radio transmitter and receiver. It is designed and man-ufactured not to exceed the emission limits for exposure to radio frequen-cy (RF) energy established by the Federal Communications Commis-sion (FCC) of the U.S. Government and by Health Canada. These limits are part of comprehensive guide-lines and establish permitted levels of RF energy for the general popula-tion. The guidelines were developed and confirmed by independent sci-entific organizations through period-ic and thorough evaluation of scien-tific studies*. The limits include a substantial safety margin designed to assure the safety of all persons, re-gardless of age and health.The exposure standard for cell phones employs a unit of measure-ment known as the Specific Absorp-tion Rate, or SAR. The SAR limit es-tablished by the FCC and by Health Canada is 1.6 W/kg**. Tests for SAR are conducted using standard oper-ating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest cer-tified power level in all tested fre-quency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base sta-tion, the lower the power output. Before a phone model is available for sale to the public, it must be tested and the manufacturer must certify to the FCC and Industry Canada that it does not exceed the limit estab-lished by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body), reported to the FCC and available for review by Industry Canada. The highest SAR value for this Siemens M75 when tested for use at the ear is0.80 W/kg***and when worn on the body+ is0.70 W/kg***Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Internet Association (CTIA) web-site at www.phonefacts.net or the Canadi-an Wireless Telecommunications Association (CWTA) websitewww.cwta.ca
SAR (M75)142© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_SAR.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (142) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)SAR information on this Siemens M75 phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/fccid after searching on FCC ID PWX-M75.While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the governmental requirements for safe RF exposure. +  This cell phone has been tested for body worn operation and meets FCC RF exposure guidelines when used with a Siemens accessory designated for this product, where available, or when used with a carry accessory that contains no metal and that positions the handset at least 1.5 cm/0.69 in in is the correct test-ing distance from the body. Use of other carry accessories may not ensure compli-ance with FCC RF exposure guidelines.* The World Health Organization (WHO, CH-1211 Geneva 27, Switzerland), on the basis of the current knowledge, does not see any necessity for special precau-tionary measures when using cell phones.Further information: www.who.int/peh-emf, www.mmfai.org, www.siemens.com/mobilephones** averaged over 1 g of tissue.***SAR values may vary depending on na-tional requirements and network bands. SAR information for different regions can be found atwww.siemens.com/mobilephones
143Quality© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Quality.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (143) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)QualityBattery quality declarationThe capacity of your mobile phone battery will reduce each time it is charged/discharged. Storage at too high or low temperatures will also result in a gradual capacity loss. As a result the operating time of your mobile phone may be considerably reduced, even after a full recharge of the battery.Regardless of this, the battery has been designed and manufactured so that it can be recharged and used for six months after the purchase of your mobile phone. After six months, if the battery is clearly suffering from loss of performance, we recommend that you replace it. Please buy only Siemens original batteries.Display quality declaration For technological reasons, some small dots in other colours may ap-pear in the display in rare cases. Please remember that if some dots appear brighter or darker in the dis-play, this generally does not mean that a fault has occurred.
U.S. FDA144© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (144) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)U.S. FDAThe U.S. Food and Drug Administration's (FDA) Center for Devices and Radiological Health Consumer Update on Mobile PhonesFDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is know – and what remains unknown – about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This in-formation may be used to respond to questions.Why the concern?Mobile phones emit low levels of ra-dio frequency energy (i.e., radio fre-quency radiation) in the microwave range while being used. They also emit very low levels of radio frequen-cy energy (RF), considered non-sig-nificant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these ques-tions, no clear picture of the biologi-cal effects of this type of radiation has emerged to date. Thus, the avail-able science does not allow us to conclude that mobile phones are ab-solutely safe, or that they are unsafe. However, the available scientific evi-dence does not demonstrate ad-verse health effects associated with the use of mobile phones.What kinds of phones are in question?Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversa-tion. These types of mobile phones are of concern because of the short distance between the phone's an-tenna – the primary source of the RF – and the person's head. The expo-sure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a per-son's RF exposure decreases rapidly with distance from the source. The safety of so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned.
145U.S. FDA© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (145) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)How much evidence is there that hand-held mobile phones might be harmful?Briefly, there is not enough evidence to know for sure, either way; howev-er, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments inves-tigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results. A few ani-mal studies, however, have suggest-ed that low levels of RF could accel-erate the development of cancer in laboratory animals. In one study, mice genetically altered to be predis-posed to developing one type of can-cer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether re-sults obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the stud-ies showed increased tumor devel-opment used animals that had al-ready been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtu-ally continuously – up to 22 hours per day.For the past five years in the United States, the mobile phone industry has supported research into the safe-ty of mobile phones. This research has resulted in two findings in partic-ular that merit additional study:1. In a hospital-based, case-control study, researchers looked for an as-sociation between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a be-nign tumor of the nerve sheath). No statistically significant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of gliomas were considered together. It should be noted that the average length of mobile phone ex-posure in this study was less than three years.When 20 types of glioma were con-sidered separately, however, an as-sociation was found between mobile phone use and one rare type of glio-ma, neuroepithelliomatous tumors. It is possible with multiple compari-sons of the same sample that this as-sociation occurred by chance. More-over, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents in-crease risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is ex-pected to bear on the accuracy and repeatability of these results.1
U.S. FDA146© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (146) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)2. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of ab-normalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural chang-es in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after expo-sure to simulated cell phone radia-tion, but only after 24 hours of expo-sure. It is possible that exposing the test cells to radiation for this long re-sulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the abnormalities to occur. The data al-ready in the literature on the re-sponse of the micronucleus assay to RF are conflicting. Thus follow-up research is necessary. 2FDA is currently working with gov-ernment, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cel-lular Telecommunications Industry Association (CTIA) in particular is ex-pected to lead to FDA providing re-search recommendations and scien-tific oversight of new CTIA-funded research based on such recommen-dations.Two other studies of interest have been reported recently in the litera-ture:• Two groups of 18 people were ex-posed to simulated mobile phone signals under laboratory condi-tions while they performed cogni-tive function tests. There were no changes in the subjects' ability to recall words, numbers, or pic-tures, or in their spatial memory, but they were able to make choic-es more quickly in one visual test when they were exposed to simu-lated mobile phone signals. This was the only change noted among more than 20 variables com-pared.3• In a study of 209 brain tumor cas-es and 425 matched controls, there was no increased risk of brain tumors associated with mo-bile phone use. When tumors did exist in certain locations, howev-er, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small num-ber of cases, the increased likeli-hood was too small to be statistically significant.4In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems as-sociated with use of mobile phones. FDA continues to work with all par-ties, including other federal agencies
147U.S. FDA© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (147) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)and industry, to assure that research is undertaken to provide the neces-sary answers to the outstanding questions about the safety of mobile phones.What is known about cases of human cancer that have been reported in users of hand-held mobile phones?Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. popu-lation at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increas-ing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to com-pare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched peo-ple without brain cancer. This is called a case-control study. The cur-rent case-control study of brain can-cers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information.What is FDA's role concerning the safety of mobile phones?Under the law, FDA does not review the safety of radiation emitting con-sumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manu-facturers of mobile phones to notify users of the health hazard and to re-pair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mo-bile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:• Support needed research into pos-sible biological effects of RF of the type emitted by mobile phones;• Design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
U.S. FDA148© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (148) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)• Cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health.At the same time, FDA belongs to an interagency working group of the federal agencies that have responsi-bility for different aspects of mobile phone safety to ensure a coordinat-ed effort at the federal level. These agencies are:• National Institute for Occupation-al Safety and Health• Environmental Protection Agency• Federal Communications Com-mission• Occupational Health and Safety Administration• National Telecommunications and Information AdministrationThe National Institutes of Health also participates in this group.In the absence of conclusive information about any possible risk, what can con-cerned individuals do?If there is a risk from these products – and at this point we do not know that there is – it is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a per-son receives. Those persons who spend long periods of time on their hand-held mobile phones could con-sider holding lengthy conversations on conventional phones and reserv-ing the hand-held models for shorter conversations or for situations when other types of phones are not avail-able.People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance be-tween their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:• a mobile phone in which the an-tenna is located outside the vehi-cle,• a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or• a headset with a remote antenna to a mobile phone carried at the waist.Where can I find additional information?For additional information, see the following websites:• Federal Communications Com-mission (FCC) RF Safety Program (select “Information on Human Ex-posure to RF Fields from Cellular and PCS Radio Transmitters”): http://www.fcc.gov/oet/rfsafety
149U.S. FDA© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (149) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)• World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf• United Kingdom, National Radio-logical Protection Board: http://www.nrpb.org.uk• Cellular Telecommunications In-dustry Association (CTIA): http://www.wow-com.com• U.S. Food and Drug Administra-tion (FDA) Center for devices and Radiological Health: http://www.fda.gov/cdhr/consumer/1 Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Sympo-sium; 1999 June 20; Long Beach, California.2 Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environ-mental Mutagen Society; March 29, 1999, Washington, DC; and personal communica-tion, unpublished results.3 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915- MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.4 Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular telephones and the risk for brain tumors; a case-control study. Int. J. Oncol, 15:113–116, 1999.
FCC/Industry Canada Notice150© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FMTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (150) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)FCC/Industry Canada NoticeYour phone may cause TV or radio in-terference (for example, when using a telephone in close proximity to re-ceiving equipment). The FCC or In-dustry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, please con-tact your local service facility.This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
151Ten Driving Safety Tips© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_Driving_Tips.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (151) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Ten Driving Safety TipsYour Siemens wireless phone gives you the power to communicate by voice – almost anywhere, anytime. But an important responsibility ac-companies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:Get to know your phone and its features such as speed dial and redial.Carefully read your instruction man-ual and learn to take advantage of valuable features most phones offer including, automatic redial and memory dial – most phones can store up to 99 numbers in memory dial. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.When available, use a hands-free device.A number of hands-free wireless phone accessories are readily avail-able today. Whether you choose an installed mounted device for your phone or a speaker phone accessory, take advantage of these devices if they are available to you.Position your phone within easy reach.Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voicemail answer it for you.Suspend conversations during hazard-ous driving conditions or situations.Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazard-ous, but so is heavy traffic. As a driv-er, your first responsibility is to pay attention to the road.Do not take notes or look up phone numbers while driving.If you are reading an address book or business card while driving a car, or writing a “to do” list, then you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not pay-ing attention to the road or nearby vehicles.
Ten Driving Safety Tips152© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_Driving_Tips.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (152) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Dial sensibly and assess the traffic.If possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip, or attempt to co-incide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this sim-ple tip – dial only a few numbers, check the road and your mirrors, then continue.Do not engage in stressful or emotional conversations that may be distracting.Stressful or emotional conversations and driving do not mix – they are dis-tracting and even dangerous when you are behind the wheel. Make peo-ple you are talking with aware you are driving and if necessary, suspend phone conversations that have the potential to divert your attention from the road.Use your phone to call for help.Your wireless phone is one of the greatest tools you can own to pro-tect yourself and your family in dan-gerous situations – with your phone at your side, help is only three num-bers away. Dial 9-1-1 in the case of fire, traffic accident, road hazard, or medical emergency. Remember, it is a free call on your wireless phone.Use your phone to help others in emergencies.Your wireless phone provides you a perfect opportunity to be a “good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergen-cies where lives are in danger, call 9-1-1, as you would want others to do for you.Call roadside assistance or a special wireless non-emergency assistance number when necessary.Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call to 9-1-1. But you can still use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless numbers.Provided by the Cellular Telecommunica-tions Industry Association (CTIA)“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1 (888) 901-SAFE, or visit our Web site at: www.wow-com.com
153Intellectual Property© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (153) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)Intellectual PropertyIntellectual Property RestrictionsAll Intellectual Property, as defined below, which is owned by or other-wise the property of Siemens Infor-mation and Communications Mo-bile, LLC (“Siemens”), its affiliates, partners or suppliers, relating to the Phone, including but not limited to accessories, parts or software relat-ing thereto (the “Phone System”), is proprietary under federal laws, state laws and International treaty provi-sions. Intellectual Property includes, but is not limited to, inventions (pat-entable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. More-over, you agree that you will not (and will not attempt to) disassem-ble, decompile, reverse engineer, prepare derivative works from, mod-ify or make any other effort to create source code from the software. No title to ownership in the Intellectual Property is transferred to you through purchase or possession of the Phone or its components. All ap-plicable rights of the Intellectual Property shall remain with Siemens, its affiliates, partners or suppliers.Siemens will have no liability with re-spect to any claim of patent infringe-ment which is based upon the com-bination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by Siemens, nor will Siemens have any liability for the use of ancillary equipment or software not fur-nished by Siemens which is attached to or used in connection with the Product, The foregoing states the en-tire liability of Siemens with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for Siemens cer-tain exclusive rights for copyrighted Siemens software, such as the exclu-sive rights to reproduce and distrib-ute copies of such Siemens software. Siemens software may be used only in the Product in which the software was originally embodied when pur-chased, and such software in such Product may not be replaced, cop-ied, distributed. modified in any way, or used to produce any deriva-tive thereof. No other use including, without limitation, alteration, modi-fication, reproduction, distribution. or reverse engineering of such Siemens software or exercise of rights in such Siemens software is permitted. No license is granted by implication, estoppel or otherwise under Siemens patent rights or copy-rights.
End user license agreement154© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (154) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)End user license agreementThis Software License Agreement ("Agreement") is between You and Siemens Information and Communi-cation Mobile, LLC and/or one of its affiliates ("Licensor"). The Agree-ment authorizes You to use the Soft-ware specified in Clause 1 below, which may be included on Your phone, stored on a CD-ROM, sent to You by electronic mail, downloaded from Licensor's Web pages or servers or from other sources under the terms and conditions set forth be-low. This is an agreement on end us-er rights and not an agreement for sale. Licensor continues to own the copy of the Software and any other copy that You are authorized to make pursuant to this Agreement. Read this Agreement carefully be-fore installing, downloading or using the Software. Further, by installing, downloading and/or using the Soft-ware, You agree to the terms and conditions of this Agreement.1. Software.As used in this Agreement, the term "Software" means, collectively:(i) all the software in Your phone, all of the contents of the disk(s), CD-ROM(s), electronic mail and its file attachments, or other media with which this Agreement is provid-ed;(ii) related Licensor or third party software; (iii) digital images, stock photographs, clip art or other artistic works ("Stock Files");(iv) related explanatory written materials ("Documentation");(v) fonts;(vi) upgrades, modified versions, updates, additions and copies of the Software, if any, licensed to You by Licensor (collectively "Updates") and(vii) any other possible documenta-tion related thereto.2. End user rights and use.Licensor grants to You a non-exclu-sive, non-transferable end user right to install the Software or use the Software installed on the phone. The Software is licensed with the phone as a single integrated product and may be used with the phone only as set forth in these licensing terms.3. Limitations on end user rights.(a) You may not copy, distribute, or make derivative works of the Soft-ware.(b) You may not use, modify, trans-late, reproduce or transfer the right to use the Software or copy the Soft-ware except as expressly provided in this Agreement.(c) You may not resell, sublicense, rent, lease or lend the Software; ex-cept You may permanently transfer all of Your rights as set forth in the Agreement only as part of a perma-
155End user license agreement© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (155) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)nent sale or transfer of the phone, provided the recipient agrees to the terms of this Agreement.(d) You may not reverse engineer, reverse compile, disassemble or oth-erwise attempt to discover the source code of the Software (except to the extent that this restriction is expressly prohibited by law) or cre-ate derivative works based on the Software.(e) You shall not display, modify, reproduce or distribute any of the Stock Files included with the Software.(f) You shall not display, modify, re-produce or distribute any of the pre-loaded content included with the software unless permitted as stated in the User Guide or in the prompts in the Software. In the event that You are allowed to display, modify, reproduce or distribute certain parts of the pre-loaded content, You shall review the "Readme" files associated with the pre-loaded content (con-tained on the CD) to ascertain what rights You have with respect to such materials. Pre-loaded content may not be used in the production of li-belous, defamatory, fraudulent, in-fringing, lewd, obscene or porno-graphic material or in any otherwise illegal manner. You agree that You shall only use the pre-loaded content in a manner that complies with all applicable laws, including, but not limited to, applicable restrictions concerning copyright and other in-tellectual property rights. You may not register or claim any rights in the pre-loaded content or derivative works thereof.(g) You agree that You shall only use the Software in a manner that com-plies with all applicable laws in the jurisdiction in which You use the Software, including, but not limited to, applicable restrictions concern-ing copyright and other intellectual property rights.4. Copyright.Licensor and/or its software suppli-ers and their respective affiliates own the Software and all rights, in-cluding without limitation including proprietary rights therein, are pro-tected by international treaty provi-sions and other applicable national laws of the country in which it is be-ing used. The structure, organization and code of the Software are the valuable trade secrets and confiden-tial information.5. Multiple copies/updates.If the Software supports multiple platforms or languages, if You re-ceive the Software on multiple me-dia, of if You otherwise receive mul-tiple copies of the Software, the number of phones on which all ver-sions of the Software are installed shall be one phone. If the Software is an Update to a previous version of the Software, You must possess a valid end user right to such previous
End user license agreement156© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (156) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)version in order to use the Update and You may use the previous ver-sion for ninety (90) days after You receive the Update in order to assist You in the transition to the Update. After such time You no longer have a right to use the previous version, ex-cept for the sole purpose of enabling You to install the Update.6. Commencement & termination.This Agreement is effective from the first date You use or install the Soft-ware. Your end user rights automati-cally and immediately terminate without notice from Licensor if You fail to comply with any provision of this Agreement. In such event, You must immediately delete, destroy or return at Your own cost and ex-pense, and without entitlement to any refund of the purchase price, the phone and the Software, and all re-lated material to Licensor.7. Except as expressly provided in the limited warranty for the phone, you acknowledge the Software is provid-ed "as is" without warranty of any kind express or implied. To the maxi-mum extent permitted by applicable law neither Licensor, Licensor's Soft-ware suppliers or their respective af-filiates, nor the copyright holders make any representations or warran-ties, express or implied, including but not limited to the warranties of merchantability or fitness for a par-ticular purpose or that the Software will not infringe any third party pat-ents, copyrights, trademarks or oth-er rights. There is no warranty by Li-censor or by any other party that the functions contained in the Software will meet your requirements or that the operation of the Software will be uninterrupted or error free.8. Not fault tolerant.The Software may contain technoloy that is not fault tolerant and is not designed, manufactured, or intend-ed for use in environments or appli-cations in which the failure of the li-censed Software could lead direclty to death, personal injury, or severe physical or environmental damage or financial loss.9. Limitation of liability.To the maximum extent permitted by applicable law, in no event shall Licensor or Licensor's Software sup-pliers or their respecitve affiliates and employees be liable for any lost profits, revenue, sales, data or costs of procurement of substitute goods or services, property damage, per-sonal injury, interruption of busi-ness, loss of business information or for any special, direct, indirect, inci-dental, economic, cover, punitive, special or consequential damages, however caused and whether arising under contract, tort, negligence, or other theory of liability arising out of the use of or inability to use the Soft-ware, even if Licensor or its Software suppliers are advised of the possibili-ty of such damages. Because some
157End user license agreement© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (157) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)countries/states/jurisdictions do not allow the exclusion or limitation of li-ability, but may allow liability to be limited, in such cases, the liability of Licensor, its Software suppliers and their respective affiliates and em-ployees shall be limited to, at Licen-sor's option, either (a) return of the price paid less a reasonable amount for usage, or (b) repair or replacment of the Software that does not meet the limited warranty provided with the phone and which is returned in accordance with the requirements of the limited warranty.Nothing contained in this Agree-ment shall prejudice the statutory rights of any party dealing as a con-sumer. Nothing contained in this Agreement limits Licensor's liability to You in the event of death or per-sonal injury resulting from Licensor's negligence if law prohibits such a limitation. Licensor is acting on be-half of its software suppliers and their respective employees and affili-ates for the purpose of disclaiming, excluding and/or restricting obliga-tions, warranties and liability as pro-vided in this clause 9, but in no other respects and for no other purpose.10. Technical support.Licensor has no obligation to furnish You with technical support except as agreed in writing between You and Licensor in the Limited Warranty pro-vided with the phone.11. Export control.The Software may be subject to ex-port regulations of the United States and other countries. You agree that You shall comply with all applicable export laws, restrictions and regula-tions of the United States or foreign agencies or authorities, and shall not export, or transfer for the purpose of re-export, any Software, product or technical data received under this Agreement or any Software or prod-uct produced by use of such techni-cal data, including processes and services, in violation of any applica-ble restrictions, laws or regulations, or without all necessary approvals.12. Applicable law & general provisions.This Agreement shall be governed by and construed in accordance with the laws of the State of California without regard to its conflicts of laws rules. This is the entire agreement between Licensor and You relating to the Software and it supersedes any prior representations, discus-sions, undertakings, end user agree-ments, communications or advertis-ing relating to the Software.
Menu tree158© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (158) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Menu treeDefault book >Show entriesNew entryBusiness cardGroupsDefault book<Info numbers>Call records >Missed callsCalls receivedCalls dialedDelete recordsTime/charges >Last callAll incom.callsAll outg. callsRemain. unitsCharge setting >Charge/UnitCharge limitSurf & fun >URL/service provider Auto displayGamesApplicationsDownload wiz.BookmarksInternetCameraMessages >Create new >SMSMMSE-mailChat room
159Menu tree© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (159) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Messages >Inbox >SMSMMSE-mailWAP pushRetrieve emailSend/receiveCB messagesDraft >SMSMMSE-mailUnsent >SMSMMSE-mailSend e-mailSend/receiveSent >SMSMMSMMS templates E-mailSMS archiveText modulesMsg settings >Zoom inSMS setup >SMS profilesSMS signatureMMS settings >Connection profile:User settingsHelpE-mail setup >AccountsGeneral sett.Help
Menu tree160© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (160) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Messages >Msg settings >WAP push set. >Security sett.HelpVoice messageCB services >Receive CBOrganizer >Calendar Topic listAppointments CB languagesTasksNotesMissed appts.Dictat.machineTime zonesCalend. setupExtras >SIM servicesMusic PlayerPoCAlarm clockSound recorderCalc.Unit converterStopwatchCountdownRemote sync.My stuff Device manag.Settings >ProfilesTopicsDisplay setup >LanguageText input >T9 preferredWallpaper Input languageLogoColor schemeScreensaverStart up anim.
161Menu tree© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (161) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings >Display setup >Shutdn anim.GreetingLarge lettersIlluminationContrast Ring tones >Ringer settingSilent alertVolume >CallsPoCMessagesCB servicesAlarm clockd Calls OrganizerGroup calls SystemOther calls ApplicationsPoCMore melodies >MessagesAlarm clockOrganizerStartup melodyShutdown mel.Call setup >Hide ID Sound recorderCall waitingDivert >All callsCall screening UnansweredAny key Not reachableMinute beep No replyBusyReceiving faxReceiving dataStatus checkClear all
Menu tree162© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (162) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings >Phone setup >Key tonesInfo tonesAuto off  Phone identityMemory assis.File system >FormatFact. settings Clean upFormat cardClock >Time/date Eject cardTime zonesDate formatTime formatBuddhist dateShow clockAuto timeConnectivity >GPRSGPRS infoIrDABluetooth >SearchSearch allKnown devicesLast connect.Black listMy BT nameData services Visib.to othersHTTP profile HelpAuthenticationFax/data >Send voice/faxRec voice/faxSecurity >Auto key lock Rcve fax/dataDirect callOnly ‚
163Menu tree© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (163) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Settings >Security >PIN code >PIN controlThis SIM only Change PINChange PIN2Chg.phonecodeBarring >All outgoingOutgoing intl.Out.int.x homeAll incomingWhen roamingStatus checkClear allNetwork >Line >Select lineNetwork info ProtectedChoose netwrkAuto networkPreferred netBand selectionFast searchUser group >ActiveSelect groupAll outgoingPref. groupAccessories >Car Kit >Auto answerAutomatic switch offCar loudspk.Headset >Auto answer
Index164© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (164) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)IndexAAccessories....................................... 139AddressbookDial entry........................................40Groups ........................................... 41New entry ...................................... 38Read entry...................................... 40Aircraft mode...................................... 83AlarmAlarm clock................................... 120Type............................................. 110Alarm clock....................................... 120All calls (diversion).............................. 90All incoming (barrings) ..................... 101Answering service (external)............... 68Any key to answer ..............................90Appointments................................... 109Authentication.................................... 99Auto displayClock.............................................. 93Duration/charges ............................ 46Auto key lock.................................... 100Auto time zone ........................... 93, 113Auto. network dialling....................... 102Auto. redial......................................... 31Automobile accessories..................... 140BBand selection .................................. 103BatteryCharge ........................................... 18Insert.............................................. 16Operating times...................... 18, 138Quality Declaration....................... 143Big letters ........................................... 86Bluetooth ........................................... 95Bookmarks (WAP) ......................... 77, 79Browser .............................................. 78Buddh. year ........................................ 93Business card...................................... 37Busy number ......................................31CCalculator......................................... 122Calendar .......................................... 108CallAccept/end..................................... 32Barring......................................... 101Charges ......................................... 46Conference .................................... 33Divert............................................. 89End................................................ 30Hold............................................... 32Menu............................................. 34Reject............................................. 32Swap between calls (change) ......... 32Call back............................................. 31Call divert........................................... 89Call screening..................................... 90Call transfer........................................ 34Call waiting ...................................33, 89Calling................................................ 30Calls dialled (call record)..................... 45Calls received (call record) .................. 45Camera .............................................. 47Car KitAccessories .................................. 140Setting......................................... 104Car kit accessories ............................ 140Care of phone .................................. 137Cell Broadcast (CB) ............................. 76Charges.............................................. 46Charges/units ..................................... 46Charging the battery .......................... 18Clock.................................................. 93Colour skin ......................................... 85Conference ........................................ 33Connection profiles ............................ 97Connectivity....................................... 94Contact list......................................... 70Control code (DTMF) .......................... 35Converter......................................... 123Countdown ...................................... 124Credit limit ......................................... 46CSD settings....................................... 97Currency converter........................... 123
165Index© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (165) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)DDate format ........................................ 93Default book.......................................37Device manag...................................126Dialling code....................................... 30Dialling with number keys................... 30Dictating machine.............................112Digital Rights Management ................. 20Direct reply (SMS)............................... 55DisplayIllumination.................................... 86Language ....................................... 85Symbols ......................................... 14Wallpaper image.............................85Divert ................................................. 89Download........................................... 80Driving safety ................................... 151DTMF tones (tone sequences) .............35Duration/charges ................................ 46EE-mailLists................................................ 66Settings.......................................... 67Write .............................................. 65Emergency number ............................ 19End user license agreement ..............154Extras ............................................... 114FFast access........................................ 106Fast network search..........................103Fax/data mode.................................... 98Flash .................................................. 48Formatting (phone memory)...............92Formatting (SMS text).........................51Forwarding (call) ................................ 34Frequency range...............................103GGames and applications ...................... 80GPRS................................................... 94Groups ............................................... 41HHandset volume.................................. 30Handsfree talking................................ 32HeadsetAccessories................................... 139Setting ......................................... 104Hide ID ............................................... 89Highlighting mode.............................. 23Hold call........................................32, 34Home network ................................. 102Hotline............................................. 135HTTP profile........................................ 98IIdentity number (IMEI) ....................... 91IMEI number ...................................... 91Inbox ................................................. 50Info tones........................................... 91Information services (CB).................... 76Infrared (IrDA) .................................... 94Input language (T9)............................ 27Inst. Message ..................................... 69International dialling code .................. 31Internet.............................................. 77JJoystick .............................................. 12KKey tones ........................................... 91LLanguage ........................................... 85Legal notices ........................................ 3Limit (duration/charges) ..................... 46Logo .................................................. 85Loss of phone, SIM card.................... 138MMailbox.............................................. 68Maintenance of phone ..................... 137Master reset ....................................... 92Media player .................................... 127Memory assistant ............................... 91MenuControls ......................................... 21My menu ..................................... 105Speed dialling ................................ 23Menu speed dialling ........................... 23Menu tree ........................................ 158MessageCB.................................................. 76E-mail ............................................ 65MMS .............................................. 57SMS ..........................................51, 53Message memory full ......................... 56Message type ..................................... 55Microphone on/off.........................34, 49Minute beep....................................... 90Missed appointments ....................... 111
Index166© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524left page (166) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)Missed calls (call record) .....................45MMSLists................................................ 62Receive........................................... 61Send............................................... 60Write .............................................. 57Mobile Phone Manager ..................... 130MultiMediaCard ................................ 129Muting (microphone).................... 34, 49My items ............................................36My menu..........................................105My stuff............................................128NNetworkBarring ......................................... 101Connection................................... 102Settings........................................ 102Notes................................................ 111OOne number only................................ 34Only ‚........................................... 100Operating times (battery)............ 18, 138Organiser.......................................... 108Own (phone) numbers........................44Own greeting ..................................... 86PPhone code......................................... 24Phone data .......................................138Phone identity number (IMEI) ............. 91Phone number memo .........................31Phone number transmission on/off...... 89Phone setup .......................................91PhonebookCall an entry ................................... 43New entry ...................................... 42Protected SIM ................................. 44Special books.................................. 44VIP numbers ................................... 44Photo ................................................. 47Pictures & sounds (SMS)......................52PINChange........................................... 24Control........................................... 24Enter ..............................................19Error............................................. 134PIN2 ................................................... 24PoC...................................................115Preferred network.............................102Preventing accidental activation..........25Product data..................................... 138ProfilesMMS .............................................. 63Phone ............................................ 82SMS ............................................... 55WAP............................................... 79Prompt............................................... 31Provider logo...................................... 85PUK, PUK2.......................................... 24QQuestions & Answers........................ 132RRecords .............................................. 45Redial................................................. 30Reminder ........................................... 31Remote synchronisation ................... 125Ringtone setting................................. 87Ringtones......................................41, 87SSafety precautions................................ 5Screensaver........................................ 85Second phone number ..................... 102Security.............................................. 24Security codes .................................... 24Service centre (SMS)........................... 55Service provider portal........................ 36Service tones...................................... 91Set time/date...................................... 93Settings.............................................. 82Short message (SMS).......................... 51Shown in the display .......................... 14Shut down animation ......................... 86Siemens City Portal............................. 36Signal strength................................... 20Silent alert.......................................... 87SIM cardClear barring .................................. 25Insert ............................................. 16Problems...................................... 132SIM services (optional) ..............114, 119
167Index© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fmTemplate: X75, Version 2.2; VAR Language: am; VAR issue date: 050524right page (167) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)SMSArchive........................................... 54Lists................................................ 54Profiles ........................................... 55Read............................................... 53Settings.......................................... 55Signature .......................................55T9 input .........................................27To group ........................................ 52Write .............................................. 51Software version................................. 91SOS ................................................ 9, 19Sound recorder.................................121Special books...................................... 44Special characters ...............................26Speech time (battery) ....................... 138Speed dialling keys ...........................107Standard functions..............................22Standby mode ....................................20Standby time .............................. 18, 138Start up animation..............................86Stopwatch ........................................ 124Storage location (Phonebook).............42Surf & fun........................................... 77Swap .................................................. 32Switch off phoneAutomatic ...................................... 91Manually ........................................ 19Switch on phone.................................19Symbols.............................................. 14Synchronisation................................ 125TT9 text input....................................... 27Tasks ................................................ 110Technical data .................................. 138Text entryWith T9 .......................................... 27Without T9 .....................................26Text module .......................................29Themes .............................................. 84This SIM only .................................... 100Time zones ........................... 19, 93, 113UUnanswered....................................... 89Upper and lowercase letters (T9) ........ 26User group ....................................... 103VValidity (SMS)..................................... 55Video mode........................................ 48Video playback ................................. 127Voice message (mailbox).................... 68VolumeHandset volume............................. 30Profiles........................................... 82Ringtone ........................................ 87WWallpaper (display)............................. 85WAP push........................................... 50

Navigation menu