BenQ Mobile and OHG M75 GSM 1900 Mobile phone with BT User Manual SIR

Download:
Mirror Download [FCC.gov]
Document ID	550423
Application ID	T8fM0oBNXl52MvCN3iMPdw==
Document Description	User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	218.12kB (2726554 bits)
Date Submitted	2005-06-13 00:00:00
Date Available	2005-06-13 00:00:00
Creation Date	2005-06-01 08:01:02
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-06-01 08:21:33
Document Title	SIR.book
Document Creator	FrameMaker 7.0
Document Author:	Thomas Euchner

right page (1) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRIVZ.fm
Legal notices .............................. 3
Safety precautions ..................... 5
Antenna care ........................... 7
Phone operation ...................... 7
Electronic devices .................... 8
Overview of phone .................. 12
Display symbols ....................... 14
Getting started ......................... 16
Insert SIM card/battery ........... 16
Inserting an
RS MultiMediaCard ................. 17
See also InCharge battery ....................... 18
dex at the end Switch on/off, PIN entry ........... 19
of this User
Entering the PIN ..................... 19
Guide
Emergency number (SOS) ...... 19
General instructions ................ 20
Standby mode ....................... 20
Signal strength ...................... 20
Digital Rights Mgmt. (DRM) .... 20
Main menu ............................ 20
Standard functions .................. 22
Highlighting mode ................. 23
Menu speed dialling ............... 23
Security .................................... 24
PIN code ................................ 24
Preventing accidental
activation ............................... 25
Text entry ................................. 26
Calling ...................................... 30
My items .................................. 36
Default book ............................ 37
Address book ........................... 38
New entry .............................. 38
Change entry ......................... 40
Call entry ............................... 40
Groups ................................... 41
Table of
Contents
Phonebook ............................... 42
New entry .............................. 42
Call (search for an entry) ........ 43
Change entry ......................... 43
 ..................... 44
Call records ............................... 45
Dur./charges ............................. 46
Camera ..................................... 47
Photo mode ........................... 48
Video mode ............................ 48
Main Inbox ............................... 50
SMS ........................................... 51
Write/send .............................. 51
Read ....................................... 53
Setting ................................... 55
MMS ......................................... 57
Create .................................... 57
Templates .............................. 59
Send ...................................... 60
Receive .................................. 61
Read ....................................... 62
Setting ................................... 63
E-mail ........................................ 65
Write ...................................... 65
Receive/read ........................... 66
Setting ................................... 67
Voice message/mailbox ............ 68
Chat room ................................. 69
Start menu ............................. 69
Login ..................................... 70
Contact lists ........................... 70
Start Chat room ...................... 73
Msg. history ........................... 74
Setting ................................... 74
CB services ................................ 76
Zoom in ................................. 76
See also Index at the end of this User Guide
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Table of Contents
left page (2) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Table of Contents
Surf & fun ................................. 77
Internet ................................. 77
Bookmarks ............................. 79
Games and Applications ......... 80
Download wiz. ....................... 80
Settings .................................... 82
Profiles .................................. 82
Topics .................................... 84
Display setup ......................... 85
Ring tones ............................. 87
Call setup ............................... 89
Phone setup ........................... 91
Clock ..................................... 93
Connectivity .......................... 94
Security ............................... 100
Network .............................. 102
Accessories .......................... 104
My menu ................................ 105
Fast access ............................. 106
Speed dialling keys ............... 107
Organizer ............................... 108
Calendar .............................. 108
Appointments ...................... 109
Tasks ................................... 110
Notes ................................... 111
Missed appts. ....................... 111
Dictat.machine .................... 112
Time zones .......................... 113
Extras ..................................... 114
SIM services (optional) ......... 114
Music player ........................ 114
PoC ...................................... 115
Alarm clock .......................... 120
Sound recorder .................... 121
Calculator ............................ 122
Unit converter ...................... 123
Stopwatch ............................ 124
Countdown .......................... 124
Remote synchronisation ....... 125
Device manag. ..................... 126
Media player ........................... 127
My stuff .................................. 128
RS MultiMediaCard ............... 129
Mobile Phone Manager .......... 130
Questions & Answers ............. 132
Customer Care ........................ 135
Care and maintenance ........... 137
Product data ........................... 138
Accessories ............................. 139
SAR (M75) ............................... 141
Quality .................................... 143
U.S. FDA .................................. 144
FCC/Industry Canada Notice ..... 150
Ten Driving Safety Tips ........... 151
Intellectual Property ............... 153
End user
license agreement .................. 154
Menu tree ............................... 158
Index ....................................... 164
See also Index at the end of this User Guide
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRIVZ.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Legal notices
Legal notices
The mobile phone described in this guide is approved for use on the GSM and
GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS)
bands. It is approved for use in the country where it was originally sold and
may be approved for use in other countries.
© 2005 Siemens Information and Communication Mobile, LLC.
All rights reserved.
Siemens and the M75 model phone
are trademarks or registered trademarks of Siemens AG and/or its affiliates in the United States and/or
other countries.
T9® is a registered trademark of
America Online, Inc. in the United
States. Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S and other
countries. The names of actual companies and products mentioned
herein may be the trademarks of
their respective owners.
Disclaimer
The information contained in the
User Guide is written for the M75
phone. Siemens reserves the right to
make changes and improvements to
the products and any of the features
of the products described in this document without prior notice. The contents of the user guide are provided
"AS IS". Except as required by applicable law, no warranties of any kind,
either express or implied, including,
but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are
made in relation to the accuracy,
reliability or contents of this document. Siemens reserves the right to
revise the user guide or withdraw it
at any time without prior notice. Under no circumstances shall Siemens
be responsible for any loss of data or
income or any special, incidental,
consequential or indirect damages
howsoever caused.
Export Information
The mobile phone may be subject to
export regulation of the United
States and other countries. Diversion
contrary to law is prohibited. You
must comply with all applicable
export laws, restrictions and regulations of the United States foreign
agencies or authorities, and may not
export, or transfer for the purpose of
re-export, the mobile phone or any
part of the phone in violation of any
applicable restrictions, laws or regulations, or without all necessary
approvals.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_LegalNotices.fm
right page (3) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:04)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Legal notices
Network Services
A number of features included in this
guide are called Network Services.
They are special services provided
by wireless service providers. In order to use any of these Network
Services, you must subscribe to
these service(s) from your service
provider and obtain instructions for
their use. Some of these Network
Services may not be available when
roaming on a network other than
your home network.
Standby and
Talk Time Information
The mobile phone incorporates features that are new to the mobile
phone world. These may include color displays and lighting, graphic
games, music reproduction and
browsing the Internet. The way you
use the display and the features will
affect the performance of the battery and how long it lasts between
charge cycles. The quoted standby
times and talk times show the minimum and maximum performance
that can be expected from the battery under normal network conditions and with the default settings as
set by the factory. However, playing
games (particularly with the backlight continuously switched on) and
listening to music will shorten the
time available for standby and to
make and receive telephone calls.
Operation times also vary depending
on network conditions, SIM settings,
charging and battery condition,
how you use your phone and other
factors.
Memory
The mobile phone contains an internal memory device that stores the
software required to operate the
mobile phone, communicate with
the GSM/GPRS network and provide
the user interface. Some features in
the internal memory run additional
devices and some additional games
and utilities. The amount of memory
available in the mobile phone is finite and may be insufficient to store
large numbers of applications and
files.
Warning!
Remember to back up your data and to do
so frequently. Always back up all data and
programs before sending the mobile phone
in for repair.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_LegalNotices.fm
left page (4) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:04)
Safety precautions
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal
requirements and local restrictions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while
driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more information consult your doctor.
Small parts such as the SIM
card, sealing stop, lens ring and
lens cap can be dismantled and
swallowed by small children.
The phone must therefore be
stored out of the reach of small
children.
Do not use an optical magnifier
to look at the activated infrared
interface [Class 1 LED product
(classification as per
IEC 60825-1)].
The mains voltage specified on
the power supply unit (V) must
not be exceeded. Otherwise
the charging device may be
destroyed.
The power supply must be
plugged into an easily accessible AC mains power socket
when charging the battery. The
only way to turn off the charging
device after charging the battery is to unplug it.
The ringtones (p. 87), message
tones (p. 91) and handsfree
(p. 32) talking are reproduced
through the loudspeaker. Do
not hold the phone to your ear
when it rings or when you have
switched on the handsfree function (p. 32). Otherwise you risk
serious permanent damage to
your hearing.
Only use original Siemens batteries (100% mercury-free) and
-charging devices. Otherwise
you risk serious damage to
health and property. The battery could explode, for instance.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
right page (5) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Safety precautions
You may only open the phone
to replace the battery (100%
mercury-free) or SIM card. You
must not open the battery under
any circumstances. All other
changes to this device are
strictly prohibited and will invalidate the guarantee.
Please dispose of unwanted
batteries and phones as permitted by the laws in your country.
The phone may cause interference in the vicinity of TV sets,
radios and PCs.
Use only Siemens original accessories. This will avoid potential risks to health or property
and ensure compliance with all
relevant regulations.
Improper use will invalidate the guarantee!
These safety instructions also apply to
Siemens original accessories.
Product attributes are subject to changes in
technology, design and availability.
Siemens reserves the right to modify products without prior notice.
Bluetooth®
Your phone has a Bluetooth interface. This
makes it possible to establish a wireless
connection of your phone with a headset of
a car kit, or with other Bluetooth-enabled
devices.
In order to establish a secure link between
the devices and to prevent a third party from
having access to your phone, you should observe the following points:
• The initial connection between two devices, what is called "pairing", should take
place in familiar surroundings.
• Both devices must be able to identify
themselves one time by using a password/
PIN. To ensure sufficient security, you
should choose a 16-digit number combination for a password that would be difficult
to guess (if a PIN has not been assigned).
• An automatic connection acceptance
("connection without confirmation") should
only be used in exceptional cases.
• In general, only trustworthy devices should
be linked in order to minimize security
risks.
• The name of your phone is transmitted in
a Bluetooth connection. The factory default is the "Bluetooth ID". The first time
Bluetooth is activated, or later in the
Bluetooth menu, you can change this
name (My BT name (p. 97)).
• If Bluetooth is not needed, this function
should be deactivated.
Before using Bluetooth accessories, or a
mobile phone inside a vehicle, check the
vehicle user guide for any limitations on the
use of these products.
Improved data transmission
In order for your phone to be able to transmit data at higher speeds, it is necessary to
have a good connection to the network.
Transmitting data can be delayed by the
process of establishing a connection. To
comply with guidelines on the effects of
radio waves, you should keep the phone a
distance of 0.59 inches (1.5 cm) from your
body while transmitting data.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
left page (6) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Safety precautions
Important
Read this information before using
your wireless handheld phone.
As this mobile phone is equipped
with a fixed (non-retractable) antenna, some paragraphs in the text
below may not be applicable.
Antenna care
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and
may violate FCC regulations.
Phone operation
Normal position
Hold the phone as you would any
other telephone with the antenna
pointed up and over your shoulder.
Tips on efficient operation
For your phone to operate most
efficiently:
• Extend your antenna fully
(if applicable).
• Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects
call quality and may cause the
phone to operate at a higher
power level than otherwise
needed.
PoC operation
Depending on the service options offered by your service provider, you
may be able to use the M75 phone as
a two-way radio (push-and-talk over
cellular "PoC" mode). In order to
maintain compliance with FCC RF exposure guidelines while using the
M75 phone in PoC mode, the phone
must be held in a vertical position at
least one inch (2.5 cm) from the lips.
Driving
Laws pertaining to the use of mobile
phones while driving vary significantly from state to state and sometimes even from locality to locality
within states. For example, some areas may allow persons to use their
mobile phones only if they employ a
hands-free device, and some areas
may prohibit the use of cell phones
entirely. Accordingly, Siemens recommends that persons check the
laws for the areas in which they drive
or will be driving. For areas where
the use of mobile phones while driving is permitted, Siemens encourages persons to use their phones responsibly and to employ hands-free
devices. Also, if using your phone
while driving, please:
• Give full attention to driving –
driving safely is your first
responsibility;
• Use hands-free operation;
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
right page (7) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Safety precautions
• Pull off the road and park before
making or answering a call, if
driving conditions so require.
For vehicles equipped with
air bags
An air bag inflates with great force.
DO NOT place objects, including either installed or portable wireless
equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air
bag inflates, serious injury could
result.
Electronic devices
Most modern electronic equipment
is shielded from radio frequency (RF)
signals. However, certain electronic
equipment may not be shielded
against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers'
Association recommends that a minimum separation of 6 inches (21 cm)
be maintained between a handheld
wireless phone and a pacemaker to
avoid potential interference with the
pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology
Research.
Persons with pacemakers
• should ALWAYS keep the phone
more than six inches from their
pacemaker when the phone is
turned ON;
• should not carry the phone in a
breast pocket;
• should use the ear opposite the
pacemaker to minimize the potential for interference;
• should turn the phone OFF immediately if there is any reason to
suspect that interference is taking
place.
Hearing aids
Some digital wireless phones may
interfere with some hearing aids. In
the event of such interference, you
may want to consult your service
provider or your hearing aid manufacturer to discuss alternatives.
Other medical devices
If you use any other personal medical devices, consult the manufacturers of your devices to determine if
they are adequately shielded from
external RF energy. Your physician
may be able to assist you in obtaining this information.
Turn your phone OFF in health care
facilities when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities
may be using equipment that could
be sensitive to external RF energy.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
left page (8) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Safety precautions
Vehicles
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles.
Check with the manufacturer or its
representative regarding your vehicle. You should also consult the
manufacturer of any equipment that
has been added to your vehicle.
Posted facilities
Turn your phone OFF in any facility
where posted notices so require.
Airplanes
FCC and Airline Regulations prohibit
using your phone while in the air.
Turn your phone OFF when requested by the airline.
Check and comply with the policy of
your airline regarding the use of your
phone while the airplane is on the
ground.
Blasting areas
To avoid interfering with blasting operations, turn your phone OFF when
in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey
all signs and instructions.
Potentially explosive
atmospheres
Turn your phone OFF when in any
area with a potentially explosive
atmosphere and obey all signs and
instructions. Sparks in such areas
could cause an explosion or fire
resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include: fueling
areas such as gasoline stations; below deck on boats; fuel or chemical
transfer or storage facilities; vehicles
using liquefied petroleum gas (such
as propane or butane); areas where
the air contains chemicals or particles, such as grain, dust or metal
powders; and any other area where
you would normally be advised to
turn off your vehicle engine.
Emergency calls (SOS)
Your wireless phone can be used
to make emergency calls. You can
make an emergency call from the
main display screen. Enter the local
emergency number such as 911 and
then press the A key.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
right page (9) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
10
Safety precautions
This phone, like any wireless phone,
operates using radio signals, wireless and landline networks, and userprogrammed functions. Because of
this, connections in all conditions
cannot be guaranteed. Therefore,
you should never rely solely on any
wireless phone for essential communications (for example, medical
emergencies). Remember – to make
or receive any calls, the phone must
be switched on and be used in a service area that has adequate signal
strength. Emergency calls might not
be possible on all wireless phone
networks or when certain network
services or phone features are in use.
Check with local service providers regarding their network features.
Always make certain that your
phone is properly charged before
attempting any emergency calls. If
you allow your battery to discharge,
you will be unable to receive or make
calls, including emergency calls. You
must then wait a few minutes after
the charging begins to place any
emergency calls.
When making an emergency call,
remember to give all of the necessary information as accurately as
possible. Remember that your wireless phone might be the only means
of communication at the scene of an
accident, therefore you should not
terminate the call until given permission to do so.
Batteries and Chargers
Only use original Siemens batteries
(100% mercury-free) and charging
devices. Use of non-Siemens batteries and/or charging devices may
cause explosion resulting in serious
injury and/or property damage. Use
original Siemens accessories in order
to avoid possible injury and property
damage and to ensure compliance
with applicable laws and regulations. Improper use invalidates the
warranty.
Battery safety precautions
To reduce the risk of fire, injury or
electric shock, and to properly dispose of batteries, please read and
understand the following instructions. CONTAINS LITHIUM-ION OR
NICKEL-METAL HYDRIDE BATTERY.
BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY. DO NOT
DISPOSE IN MUNICIPAL WASTE.
1. Only use the batteries specified
for use with this mobile phone.
2. Do not use batteries of different
sizes or from different manufacturers in this mobile phone.
3. Do not dispose of the battery in a
fire; it may explode. Dispose of
used batteries and phones in
accordance with applicable laws
and safety regulations. Do not
expose battery to water. Check
with local codes for special disposal instructions.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
left page (10) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Safety precautions
4. Do not open or mutilate the battery. Doing so may cause damage
to the eyes or skin.
5. Exercise care in handling the battery in order not to short the battery with conducting materials
such as rings, bracelets, and keys.
The battery or conducting material may overheat and cause burns
or fire.
6. Charge the battery provided with,
or identified for use with, this
product only in accordance with
the instructions and limitations
specified in the User's Guide. Do
not attempt to charge the battery
by any means other than those
specified in the User's Guide.
11
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SecurityInfo.fm
right page (11) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
12
Overview of phone
Overview of phone
During a call
A Call key
Dial displayed/highlighted phone numbers/names, take calls. In standby
mode, show last phone numbers
dialled.
B On/Off/End key
• Switched off: press and hold to
switch on.
• During a conversation or in an application: press briefly to finish.
• In menus: press briefly to go back a
level.
Press and hold to return to standby
mode.
• In standby mode: press and hold to
switch off phone.
Joystick
Press the joystick down vertically to start an application or function. The current function is
displayed between the softkeys
(p. 21).
In standby mode
Open main menu.
Set volume.
Call options.
£
Service provider
01.05.2005
10:10
Inbox í New SMS
G Open user profiles.
Phonebook/
H Open
Addressbook.
E Open Main Inbox.
D Start the camera.
In lists, messages and menus
I Scroll up and down.
D Back one level.
< > Softkeys
The current functions of this key are
shown in the bottom line of the displays
as §Text§/symbol (e.g. p).
Internet
Access to the Internet portal.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Overview.fm
left page (12) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Overview of phone
1 Integrated antenna
Do not obstruct the phone above the
battery cover unnecessarily. This
reduces the signal quality.
Loudspeaker
Sidekeys
a Camera
£
Service provider
• Press in standby mode:
Start the camera.
• During a call: Decrease volume.
b PoC
§
• Press in standby mode:
Start PoC.
• During a call: Increase volume.
Display
Infrared interface (IrDA)
* Ringtone
• Press and hold in standby mode:
switch acoustic signals on/off
(except for alarm clock).
• Press and hold when incoming call is
received: switch off ringtone for this
call only.
# Key lock
Press and hold in standby mode or
when playing a music file:
Switch key lock on/off.
Connection socket
For charger, headset, flash, etc.
Slot for RS MultiMediaCard
Car kit holder
Connection for external antenna
Camera lens
Mirror
01.05.2005
10:10
Inbox í New SMS
13
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Overview.fm
right page (13) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
14
Display symbols
Display symbols
Display symbols (selection)
Ç
¿
¾
¼
¹
Ä
Strength of receiving signal
Charging
Battery charge level, e.g. 50%
Phonebook
Call records
Surf & fun/
Service provider portal
Organizer
Messages
Å
£
¢
¤
±
²
³
´
¯
Camera
®
Extras
¨
ª
My stuff
Settings
All calls are diverted
Ringer (beep) off
Short ring (beep) only
Ringtone only if the caller is
stored in the Phonebook
Alarm set
Keypad locked
Auto answer feature on
Activated and available
Registered
Temporarily interrupted
Internet offline
Internet online
Internet via GPRS online
Internet no network
IrDA activated
IrDA transmission
Bluetooth activated
Bluetooth transmission
Events (selection)
ã
ä
å
Æ
Â
Ê
SMS memory full
MMS memory full
Phone memory full
No network access
Missed call
Memory assistant
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Displaysymbols.fm
left page (14) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Display symbols
Message symbols (selection)
Camera symbols
Unread
È Switch to photo mode
Read
É Switch to video mode
Draft
Ù Brightness
Sent
Ú Zoom factor
MMS not sent
Û
White balance
MMS notification received
×
Flash connected
MMS notification read
MMS with DRM contents
(p. 20)
E-mail forwarded
E-mail with attachment
À
Voice mail received
15
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Displaysymbols.fm
right page (15) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
16
Getting started
Getting started
The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
Your phone's
display is supplied with a
protective film.
Remove this
film slowly before assembling the
phone.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disappear within approx. 10 minutes.
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the important data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card flat in front of
the slot with the contact surface
facing downwards. Then push
the SIM card in using gentle pressure 1 (ensure that the chamfered corner is in the correct
position).
• To remove the SIM card push the
latch downwards 2 and pull out
the SIM card in shown direction
3. Please do not use any tools.
• Insert the battery sideways into
the phone 4, then press it downwards 5 until it clicks into
position.
• To remove the battery, pull it out
with the retaining tab on the side.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
left page (16) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Getting started
• Place the cover in position and
push it towards the front 6.
17
Inserting an
RS MultiMediaCard
When delivered, the RS MultiMediaCard is not yet in the phone.
• To insert the RS MultiMediaCard,
gently push the card right in until
it clicks into place 1.
• Close the cover by turning the
locking catch ninety degrees
clockwise 7.
• If necessary, use the plug 2.
Additional information
Please switch off your phone before removing the battery!
The phone supports 1.8 V and 3 V SIM
cards. Please contact your service provider
if you have an older card.
• Before removing the RS MultiMediaCard, carry out the Eject card function in the My stuff options menu.
This prevents any possible data
loss.
• To remove the RS MultiMediaCard, open the cover and press the
card briefly (if necessary, use the
plug). The card will pop out a little
and you can remove it. Finally,
close the cover again.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
right page (17) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
18
Getting started
Charge battery
Charging procedure
The battery is not fully charged
when delivered. Plug the charger
cable into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours.
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immediately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case, the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit
included in delivery!
Display while in service
Charge level display during operation (empty – full):
VWX
Display during charging.
Charging time
An empty battery is fully charged after about 2 hours. Charging is only
possible within a temperature range
of +5 °C to 45 °C. If the temperature
rises/falls 5 °C above/below this, the
charge symbol flashes a warning.
The mains voltage specified on
the power supply unit must not be
exceeded.
Operating times
The operating time depends upon
the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Talktime: up to 300 minutes
Standby time: up to 250 hours
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly after an uninterrupted charging/discharging cycle. Therefore do not remove the battery unnecessarily, and
where possible, do not end the
charging process prematurely.
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
left page (18) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Switch on/off, PIN entry
19
Switch on/off, PIN entry
Switching phone on/off
Press and hold the On/Off/
End key.
Entering the PIN
The SIM card can be protected with
a 4 to 8-digit PIN.
Enter the PIN using the
number keys. The characters **** appear to ensure nobody can read
your PIN on the display.
Correct with].
Confirm. Logging on to
the network will take a
few seconds.
Additional information
Change PIN.......................................p. 24
Clear SIM card barring ......................p. 25
Emergency number
(SOS)
Only to be used in real emergencies!
By pressing the §SOS§ softkey you can
make an emergency call on any network without a SIM card and without
entering a PIN (not available in all
countries).
Switching your phone on
for the first time
Time/date
Set the clock correctly on a one-off
basis when getting started.
Press this key, then select
§Change§.
First enter the date (day/
month/year), then the
time (24 hours, including
seconds).
Press. The time and date
are updated.
Time zones
Set the time zone for your area.
Select the city in the desired time zone from the
list ...
§Set§
... and set it.
Copy SIM addresses
The first time the SIM card is inserted, the entries on it can be copied to
the Addressbook. Please do not interrupt this procedure. During this time,
do not accept incoming calls. Follow
the instructions in the display.
You can also copy data from the
SIM card at a later time (p. 43).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
right page (19) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
20
General instructions
General instructions
Standby mode
Main menu
The phone is in standby mode and
is ready for use when the name of
the service provider appears on the
display.
The main menu is displayed graphically with symbols:
Press and hold the On/Off/
End key to return to
standby mode from any
situation.
Signal strength
Strong receiving signal.
A weak signal reduces the
voice quality, can cause
the connection to be lost,
and consumes more current. Change your
location.
Digital Rights Mgmt.
(DRM)
Remember that your phone has Digital Rights Management. The use of
downloaded pictures, sounds or applications can be restricted by the
suppliers, e.g. copy protection, use
for a limited period of time only, the
number of times it can be used etc.
(see also p. 81).
F/I
Call main menu up from
standby mode.
Select the application
symbols.
Start an application.
Main menu options
§Options§
Open menu.
Different functions are available depending on the context.
Large
letters
Select one of two font
sizes.
Illumination Set display illumination to
brighter/darker.
Eject card
Allows the RS MultiMediaCard to be removed without
loss of data.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
left page (20) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
General instructions
User guide
Symbols
Menu controls
The following symbols are used to
explain operation:
The steps needed to reach a function
are shown in a condensed form in the
user guide, e. g. to display record of
dialled calls in condensed form:
C ¢P¢Calls dialed
This comprises the following steps:
<>
Open main menu.
Select Calls dialed
function.
Confirm.
On/Off/End key
Call key
Softkeys
Press vertically down on
the joystick (to call up the
menu, for example).
DFE
HIG
Press the joystick in the
direction indicated.
Function dependent on
service provider. May require special registration.
Enter numbers or letters.
Displays a softkey
function.
§Menu§
Select P.
Confirm.
21
Press joystick
The symbol in the centre of the lower line of the display shows the current function when the joystick is
pressed down vertically.
í
î
ï
ð
ì
ñ/ ò
Display menu
Take photos
Zoom
Call, accept call
OK
Play/Pause for sounds &
videos.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
right page (21) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
22
Standard functions
Standard functions
Option menus
Functions which appear repeatedly
in the options menu are listed here.
§Options§
Open menu.
Edit
Open the entry to edit.
View
Display entry.
Delete/
Delete all
Delete entry/delete all
entries after confirmation.
New entry
Create new entry.
Send...
Select transmission service
and medium for sending
or printing e.g. IrDA or
Bluetooth.
Reply/
Reply to all
The sender becomes the
recipient, “Re:” is placed in
front of the subject matter
and the received text is
transferred to the new
message.
Save
Save entry.
Save to 9
Save recipients in the current address directory.
Sort
Set sort criteria (alphabetical order, type, time).
Text input
(p. 26)
T9 preferred: Activate/
deactivate T9 input.
Input language: Select
language for text.
Rename
Rename selected entry.
Capacity
Display memory capacity.
Properties
Display properties of the
highlighted object.
Help
Display help text.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
left page (22) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Standard functions
23
Highlighting mode
Menu speed dialling
With some applications (e.g. Phonebook/Addressbook), you can highlight one or more entries in a list in
order to carry out a function jointly.
All menu functions are numbered internally. A function may be selected
directly by entering these numbers
in sequence.
§Options§
Open menu.
Mark
Activate highlighting
mode.
E.g., to write new SMS (from standby mode):
Select entry/entries.
Highlight or delete
highlighting.
§Mark§
The current entry is
highlighted.
§Unmark§
Unhighlight the current
entry.
Additional highlighting functions:
§Options§
Mark all
Open menu.
Highlight all entries.
Deselect all Delete highlighting on all
highlighted entries.
Delete
marked
All highlighted entries are
deleted.
Press to display the main
menu. Then press
for Messages, then
for Create new, then
for SMS.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
right page (23) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
24
Security
Security
The phone and SIM card are protected against misuse by several security
codes.
Keep these security codes in a safe
place where you can access them again
if required.
PIN code
PIN
Protects your SIM card
(Personal Identification
Number).
PIN2
This is needed to set the charge
detail display and to access additional functions on special
SIM cards.
C ¢T¢Security¢PIN code
¢Select function.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not permit deactivating the control.
§Change§
Press.
Enter PIN.
Confirm entry.
Change PIN
PUK
PUK2
Key code. Used to unlock SIM
cards after the wrong PIN has
been entered repeatedly.
You can change the PIN to any 4 to
8-digit number you find easier to
remember.
Phone
code
Protects your phone. Must be
entered at the first security
setting.
§Selection§ Press.
Enter current PIN.
Press.
J , C Enter new PIN.
J , C Repeat new PIN.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
left page (24) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Security
C ¢T¢Security¢PIN code
¢Select function.
Change PIN2
(Display only if PIN2 is available).
Proceed as for Change PIN.
Chg.phonecode
(Change phone code)
You define the phone code (4 to
8 digits) when you call up a phonecode protected function for the first
time (e.g. Direct call, p. 34). It is then
valid for all phone-code protected
functions.
Following the third unsuccessful attempt, access to the phone code and
the functions that use it is denied. If
this occurs, contact Siemens Service
(p. 135).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instructions. If the PUK (MASTER PIN) has
been lost, please contact your service provider.
25
Preventing accidental
activation
Even if PIN control is deactivated
(p. 24) confirmation is required to
switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are carrying it in a bag or when you are travelling in an aircraft.
Press and hold.
§OK§
Press. The phone switches
on.
§Cancel§
Press this key or take no
action. The phone does
not switch on.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Startup.fm
right page (25) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
26
Text entry
Text entry
Text entry without T9
Press the number key repeatedly until the required character appears.
After a brief interval the cursor will
advance. Example:
Ä, ä, 1–9
Press briefly: special characters are shown.
Press and hold: open input
menu.
Press once/repeatedly:
.,?!’"0+-()@/:_
Press once briefly to write
the letter a, twice to write
b etc.
Press and hold: writes 0.
Writes blank. Press
twice = line break.
Press and hold to write the
number.
Unusual characters and
numbers are displayed after the relevant letters.
Special characters
Press briefly to delete the
letter before the cursor.
Press and hold to erase the
whole word.
Move the cursor
(forwards/back).
Press briefly: Swap between abc, Abc, T9abc,
T9Abc, 123. Status shown
in top line of display.
Press and hold: all inputvariants are displayed.
Press briefly. The symbols
chart is displayed:
1)
¿
¡
’
¤ ¥ $ £ € @ \
& #
} % ~ < = >
§ Γ ∆ Θ Λ Ξ
Π Σ Φ Ψ Ω
1) Line break
I, F
Navigate to characters.
Press.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fm
left page (26) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Text entry
27
Input menu
Writing with T9
For text input:
The display changes as you proceed.
Press and hold. The input
menu is displayed:
Text format (SMS only)
Input language
Mark
Copy/Insert
Text entry with T9
“T9” deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
Activate, deactivate T9
§Options§
Open text menu.
T9 input
Select.
§Change§
Activate T9.
Select input language
Select the language in which you
want to compose your message.
§Options§
Open text menu.
Input language
Select.
Select language.
§Selection§ Confirm. The new language is set. Languages
with T9 support are
marked with the T9
symbol.
It is therefore best if you finish a word
without looking at the display.
Simply press the keys once where the
relevant letter is located. For “hotel”,
for example:
# Press briefly for Abc then
46835
1 A blank ends a word.
T9
Do not use special characters such as
Ä. Use standard characters instead,
e.g. A; T9 will do the rest for you.
T9® Text Input is licensed under one or more
of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541,
5,187,480, 5,945,928 and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fm
right page (27) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
28
Text entry
T9 word suggestions
If several options are found in the
dictionary for a key sequence (a
word), the most probable is displayed first. If the word you want has
not been recognised, the next suggestion from T9 may be correct.
The word must be shown
§highlighted§. Then press
Press. The displayed word
is replaced with a different word. If this word is also incorrect, press again.
Press. Repeat until the
correct word is displayed.
If the word you want is not in the dictionary, it can also be written without T9.
To add a word to the dictionary:
§Learn§
Select.
The last suggestion is deleted and
the word may now be entered without T9 support. Press §Save§ to add it
automatically to the dictionary.
Correct a word
Move left or right, word
by word, until the required word is
§highlighted§.
Scroll through the T9
word suggestions again.
Deletes the character to
the left of the cursor and
displays a new possible
word.
Additional information
Within a “T9 word“, individual letters may
not be edited without first removing the T9
status. In most cases it is better to rewrite
the complete word.
Set a full stop. The word is
concluded if it is followed by a
space. Within a word, a full
stop represents an apostrophe or hyphen:
e.g. §provider.s§ = provider’s.
Moving the cursor to the right
ends the word.
Press briefly: switch between: abc, Abc, T9abc,
T9Abc, 123. Status shown in
top line of display.
Press and hold: all input variants are displayed.
Press briefly: select special
characters (p. 26).
Press and hold: opens input
menu (p. 27).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fm
left page (28) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Text entry
Text modules
Use text modules
Text modules can be stored in the
phone for adding to your messages
(SMS, MMS, e-mail).
Write message
(SMS, MMS, e-mail).
§Options§
Open text menu.
Write text modules
C ¢M¢Text modules

Select.
The input field is opened.
Write text.
§Options§
Open menu and select
Save. Accept the suggested name or allocate a new
one.
Save.
29
Insert from Select.
Select Text module.
Select text module from
the list.
§Selection§ Confirm. The text module
is displayed.
Confirm. The text module
is inserted in the message
to the right of the cursor.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Text.fm
right page (29) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
30
Calling
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
Enter the number (always
with area/international
dialling code).
] A short press clears the
last digit, a long press
clears the entire phone
number.
Press the Call key. The displayed phone number is
dialled.
End call
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
It is only possible to adjust the volume during a call.
With the joystick or with
the sidekeys.
If a car kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial previous numbers
To redial the phone number last
called:
Press the Call key twice.
To redial other numbers that were
dialled previously:
Press the Call key once.
Pick out the phone number from the list, then to
dial press the …
... key.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fm
left page (30) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Calling
If the number is busy
Reminder
If the called number is busy or cannot be reached because of network
problems several options are available (depending on the service provider). An incoming call or any other
use of the phone interrupts these
functions.
§Prompt§
Either
Auto. redial
A beep reminds you to redial the displayed phone
number after 15 minutes.
Additional information
Store phone number in the
Ð
Addressbook/Phonebook.
§Handsfr.§ Switch on Handsfree (playback from loudspeaker).
Press and hold to switch
microphone off.
§Auto dial§ The phone number is
automatically dialled ten
times at increasing time
intervals. End with:
B End key.
Or
Call back
31
§Call back§ Your phone rings when
the busy number is free.
Press the Call key to dial
the number.
International dialling codes
Press and hold until a “+” is
displayed.
§Country§ Press and select country.
Phone number memo
You can enter a phone number during the
call. The person to whom you are speaking
can hear these entries. When the connection has ended you can save or dial the
phone number.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fm
right page (31) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
32
Calling
Accept call
Handsfree
The phone must be switched on. An
incoming call will interrupt any other
use of the phone.
You can put the phone down during
a call. You can then hear the caller
via the loudspeaker.
Press.
Or
Press.
A phone number transmitted by the
network plus the corresponding
name (possibly with a picture) are
displayed if they are stored in the
Phonebook/Addressbook (p. 39).
Reject call
§Reject§
Press.
Or
Press briefly.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Additional information
Press and hold to switch off
the ringtone and silent alert.
Missed call display.
§Handsfr.§ Activate handsfree
talking.
Switch on.
Regulate the volume with
the joystick.
§Handsfr.§ Deactivate.
Warning!
Always switch off “handsfree talking”
before holding the phone to your ear!
Otherwise, you will damage your hearing!
Swap between 2 calls
Establish a second connection
You can call another number during
a call.
Hold
Â
Open call menu.
The current call is put on
hold.
Now dial the new phone
number or select
C Open the call menu,
then select Default book,
and then select the phone
number.
When the new connection is
established:
§Toggle§
Swap between calls.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fm
left page (32) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Calling
Incoming calls during a call
You may need to register for this service with your service provider and set
your phone accordingly (p. 89). During a call, you may be advised that
there is another call waiting. You will
hear a special tone during the call.
You have the following options:
• Accept the waiting call in addition to
the first
§Toggle§
Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap between the two calls.
• Reject the waiting call
§Reject§
§Forward§
Press.
End call(s)
Press the End key.
After the Return to held call? display,
you have the following selection:
§Yes§
You accept the call on
hold.
§No§
You end the second call
too.
Conference
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your service provider or may have to be enabled specially.
Or
A connection has already been
established:
The waiting call is diverted, for example, to the
mailbox.
Open the call menu and
select Hold. The current
connection is maintained.
Now dial a new number.
When the new connection is established ...
... Open the call menu and
select Conference. The
held call is joined.
• Accept the waiting call and end the
current call
33
End the current call.
Accept new call.
Repeat procedure until all participants are linked together (up to
5 participants).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fm
right page (33) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
34
Calling
End
All calls in the conference
are ended when you press
the End key.
Call options
The following functions are only
available during a call:
Press.
Hold
Hold current call.
Microphone
on
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also: * Press and hold.
Call transfer Connect the original call to
a second call. For you,
both calls are now ended.
Main menu
Access to the main menu.
Call status
List all held and active calls
(e.g. participants in a conference).
Direct call
If this is active, only one number can
be dialled.
Switch on
Handsfree
Playback through the
loudspeaker.
C ¢T¢Security
¢Direct call
C Confirm selection.
Volume
Adjust handset volume.
Default book Phonebook/Addressbook.
Conference
(p. 33)
Time/
charges
Display talktime that has
elapsed so far and (if set)
charges incurred during
the connection (p. 46).
Send DTMF
Enter tone sequences
(numbers) for remote inquiries to an answering
machine.
Enter phone code.
When first prompted you define and
enter the phone code (4 to 8 digits).
Confirm selection.
Please do not forget this code (p. 24)!
Ï / J Select phone number
from the Phonebook/
Addressbook or enter it.
Confirm.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fm
left page (34) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Calling
Apply
§Carola§
To dial the phone number
(e.g. Carola’s phone number), press and hold the
right softkey.
Switch off
Using the Phonebook/
Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phonebook/Addressbook in the same way
as a normal entry.
Press and hold.
Enter phone code.
Confirm input.
Tone sequences (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists. These
entries are transmitted directly as
DTMF codes (control codes).
Send DTMF
35
Enter phone number.
Press until a “+” appears
in the display (wait for
the connection to be
established).
Enter DTMF codes
(numbers).
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
Open the call menu.
Enter a name.
§Save§
Store entry.
Select.
You may also store just the
DTMFcodes (numbers) and then
send them during the call.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phone.fm
right page (35) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
36
My items
My items
Set your phone as you wish for the
following items:
Ringtones (p. 87)
Assign individual ringtones to caller
groups or special dates.
Pictures (p. 128)
Assign individual pictures or photos
to your Addressbook entries.
Animations (p. 86)
Choose a start up and shut down
animation as well as a personal
greeting.
Themes (p. 84)
Load a completely new visual presentation onto your phone.
Screensaver (p. 85)
Choose an analogue or digital clock,
or a personal picture.
(Operator) Logo (p. 85)
Choose an individual picture (to be
displayed in standby mode)
Wallpaper (p. 85)
Choose your own permanent background image.
Colour skin (p. 85)
Select a colour skin for the user
interface.
Applications (p. 80)
Download your own applications
from the Internet.
Where do I get what?
You can purchase additional ringtones, logos, animations and Java
applications from your service provider or directly from Siemens.
Service provider portal
Depending on your service provider,
you will find direct access to his portal on your telephone via menu
items or bookmarks. Please contact
your service provider for more information on these services.
Siemens Mobile Portal
You will find additional ringtones,
logos, animations and screensavers
as well as more applications, games
and services on the Internet at:
www.siemens.com/mobilephones
or you can download them directly
from the Internet:
wap.siemens-mobile.com
You will also find a service for saving
data here as well as a list of the countries in which these services are
available.
My menu
Create your own menu (p. 105) with
frequently used functions, phone
numbers or Internet pages.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyPhone.fm
left page (36) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Default book
Default book
C ¢L¢Select function.
Show entries
The entries in the default book
(Addressbook or Phonebook) are
shown.
J /I
Select a name with the
first letter and/or scroll.
New entry
Create new entry.
Address book (see also p. 38)
Phonebook (see also p. 42)
Default book
You can set which directory you prefer to use.
The selected default book is opened
in standby mode with the joystick.
Open Phonebook or
Addressbook
Address book
A lot of data can be saved in the
Addressbook for each entry and additional functions (e.g., Birthday:,
Picture:, Chat room) can be used.
37
Phonebook
The Phonebook is located on the SIM
card. Only one phone number can be
entered per entry. The Phonebook
on the SIM card can easily be transferred into a different phone.
Business card
Create your own business card to
send to a different GSM-phone. If no
business card has been created yet,
you will be asked for your input.
Move from field to field to
enter your details.
§Save§
Press.
Additional information
The content of the business card corresponds to international standards (vCard).
Copy numbers from AddressÏ
book/Phonebook.
Groups
See p. 41.

See p. 44.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Pref_Book.fm
right page (37) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
38
Address book
Address book
The Addressbook can store up to
1,000 entries, each with a variety of
phone and fax numbers as well as
additional address details. These entries are managed in the phone
memory separately from those in the
Phonebook. However, you can exchange data between the Addressbook and the Phonebook on the
SIM card.
Possible input fields
New entry
E-mail:
The Addressbook is set as standard:
Open Addressbook
(in standby mode).
Display input fields.
Select required input
fields.
Fill in input fields. The
maximum number of
characters available is
shown at the top of the
display.
At least one name must
be entered. Always enter
phone number with
dialling code.
Last name:
URL:
First name:
Chat room >>
Phone number:
Group:
Phone no./office:
Company:
Phone no./cell:
Address: >>
Fax:
Birthday: >>
Fax #2:
Picture:
Email #2:
All fields
Additional information
Group:
Allocation to a group
(p. 41).
Address:
Extension to enter the
complete address:
Street:, ZIP:, City:, Country:
Com. services
Information if the entry is
being used as an Inst. Message contact (p. 69) or for
Walky Talky:
Nickname:, Push to talk ID:,
Push to talk type:, WV user
ID:, ICQ number:, AIM screen
name:
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fm
left page (38) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Address book
Birthday:
Picture:
After activation, the date
of birth is entered.
Display/find entry
Reminder: The phone reminds you at the time you
set one day before the
birthday.
Open Addressbook
(in standby mode).
J/I
Select a name with the
first letter and/or scroll.
Display.
Assign a picture to the entry. This is displayed when
you are called by a corresponding phone number.
Display options
§Options§
All fields/Reduced fields
Displays the number of
input fields.
§Save§
Save the entry.
Additional information
switch to
Î Temporary
Phonebook.
Synchronisation
With the mobile phone manager (p. 130)
you can synchronise your Addressbook
with Outlook®, Lotus Notes™ and other
Siemens phones.
Using Remote sync. you can synchronise
your mobile with an organiser stored on the
Internet (see also p. 125).
39
The options menu only
ever offers the functions
for the currently selected
input field.
Move to ...
Assign current entry or
highlighted entries to a
group.
View
Display an assigned
picture.
Copy to SIM Copy name and one phone
number to the SIM card
(Phonebook).
New SMS,
New MMS,
New e-mail
Create a message with the
selected entry.
Browser
Start browser and visit
URL.
Inst. Msg.
Start a dialogue with the
selected entry (p. 69).
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fm
right page (39) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
40
Address book
Change entry
Open Addressbook
(in standby mode).
Select required entry.
§Edit§
Press.
Select input field.
§Edit§
Open entry.
Make changes.
§Save§
Save.
Call entry
Addressbook options
Depending on the actual situation,
different functions will be offered.
These functions can be applied to
the entry currently selected as well
as to multiple selected entries:
§Options§
Move to ...
Open menu.
Assign current or highlighted entries to a group.
Copy to SIM Copy name and phone
number to the SIM card
(Phonebook).
Filter
Only those entries which
match the filter criteria are
displayed.
Import
Set up readiness to receive
for a Phonebook entry via
IrDA (p. 94) or SMS (p. 51).
Enter search term.
Open Addressbook
(in standby mode).
J /I
Select a name with the
first letter and/or scroll.
Search
The number is dialled.
(For standard functions see p. 22)
If there are several numbers in the
Addressbook entry, these are offered for selection.
Select phone number.
The number is dialled.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fm
left page (40) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Address book
41
Groups
Ringtone for group
Nine groups are specified in your
phone to enable you to arrange your
Addressbook entries clearly. You can
rename seven groups.
Assign a ringtone to a group that
plays when one of its members calls
you.
Open Addressbook
(in standby mode).
 Select (the number of
entries is listed after the
group name).
C ¢T¢Ring tones
¢Group calls
Select group.
List entries in the group
for viewing and editing.
Open menu.
Rename
Change name of group.
Group
symbol
Assign a symbol to a group.
The symbol will then appear
in the display when one of the
group members calls.
Additional information
No group: Contains all Addressbook
entries that do not belong to a group
(name cannot be changed).
Received: Contains Addressbook entries
received by IrDA (p. 94), Bluetooth (p. 95)
or SMS (p. 51) (name cannot be changed).
Confirm. If a ringtone has
already been set, it will be
played. Otherwise, the
ringtone list will be displayed and you can select
one.
I If necessary, select a
ringtone.
Groups menu
§Options§
Select group.
Confirm.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Adressbook.fm
right page (41) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
42
Phonebook
Phonebook
Entries in the Phonebook (on the
SIM card) are managed separately
from those in the Addressbook.
You can, however, exchange data
between the Phonebook and the
Addressbook.
New entry
If the Phonebook has been selected
as the default book:
Open Phonebook
(in standby mode).

Select.
Display input fields.
Select input field.
Fill in input fields. The
maximum number of
characters available is
shown at the top of the
display.
Number:
Always enter phone number with
dialling code. An entry will not be
saved without a phone number.
Name:
Enter first and/or last names.
Group:
Default: No group
Important phone numbers can be
put in one group (VIP). This group is
independent from groups in the
Addressbook.
Location:
Default: SIM
Special SIM cards can save phone
numbers in a protected area (SIM protected) (PIN2 required).
Record #:
Each entry is automatically assigned
a record number. You can also dial
using the record number.
§Save§
Press to store the new
entry.
Additional information
switch to AddressÎ Temporary
book.
§Country§ International dialling code...p. 31
Functions concerning Text entry.........p. 26
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phonebook.fm
left page (42) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Phonebook
Call (search for an entry)
Open Phonebook.
J/I
Select a name with the
first letter and/or scroll.
Phone number is dialled.
Call using record no.
A record number is automatically assigned to every new entry in the
Phonebook.
Enter record number.
Phonebook options
The following functions are available, depending on the current
situation.
§Options§
Change entry
Select entry in
Phonebook.
§Edit§
Press.
Select desired input field.
Make changes.
§Save§
Press.
Open menu.
Copy to 9
Copy all highlighted
entries to the Addressbook.
Copy all to 9
Copy all entries to the
Addressbook.
Delete all
The whole Phonebook
is deleted (PIN-protected).
Import
Set up readiness to receive for a Phonebook
entry via IrDA (p. 94) or
SMS (p. 51).
Press.
Press.
43
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phonebook.fm
right page (43) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
44
Phonebook

/
Open Phonebook
(in standby mode).

Select.

Enter “own” phone numbers in Phonebook (e.g., fax) for information. These
numbers can be changed, deleted
and also sent as an SMS message.

Display the phone numbers saved in
the VIP group.

Entries stored in the Phonebook on
the SIM card can also be used on other GSM phones.

On special SIM cards, phone numbers can be stored in a protected location. PIN2 is required for editing.
There might be phone numbers
saved in your Phonebook that have
been provided by your service provider. They may be used to call local
or national information services or to
use services offered by your service
provider.
Completing phone numbers in the
Phonebook
Digits may be replaced by a “?” when
phone numbers are entered in the
Phonebook:
Press and hold.
These wildcards must be replaced with
numbers before dialling (e.g., with the extension numbers in a phone system).
To make a call, select the phone number
from the Phonebook.
Press.
Replace “?” with numbers.
The phone number is dialled.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Phonebook.fm
left page (44) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Call records
45
Call records
The phone number of a caller is displayed if
• the caller has switched off the
Hide ID function and
• the network supports the
“Caller Identity” function.
Alternatively, a caller’s name is displayed if it is stored in the Phonebook/Addressbook.
Your phone stores the phone
numbers of calls for convenient
redialling.
C ¢P
Select record.
C Open call record.
Select phone number.
A Dial phone number.
Or
§View§
Display information on
the phone number.
Up to 500 entries are stored in the
records:
Missed calls
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
Â
Symbol for missed call
(in standby mode). Press
the softkey beneath the
symbol to bring up the
Main Inbox (p. 50).
Calls received
Accepted calls are listed.
Calls dialed
Access to the last numbers you have
dialled.
Fast access in standby
mode.
Delete records
The records are deleted.
Records menu
The records menu can be called up if
an entry is highlighted.
§Options§
Open menu.
Copy to 9
Copy the currently selected phone number into the
preferred directory.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Records.fm
right page (45) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
46
Dur./charges
Dur./charges
You can display the charges and duration during a call. You can set a
unit limit for outgoing calls.
C ¢P¢Dur./charges
Select:
Last call
All outg. calls
All incom.calls
Remain. units
§Reset§
(PIN2 prompt)
Special SIM cards allow you or the
service provider to define a credit
limit or a period after which the
phone is barred for outgoing calls.
§Edit§
Press.
Enter PIN2.
Charge setting
Account limit
Switch on.
Scroll through the display.
Enter number of units.
Open item.
§OK§
Confirm.
Reset the currently selected setting.
Then confirm the credit or reset the
counter. The status display for prepaid cards may vary depending on
the service provider.
Charge setting
Account limit
Open menu.
Currency
Enter desired currency.
Charge/Unit
(PIN2 prompt)
Enter the currency as well as the
charge per unit and time.
Auto display
Call duration and charges are
displayed automatically.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_TimeCharge.fm
left page (46) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Camera
47
Camera
You can view photos/videos recorded on the integrated camera immediately and
• use the photo as a background
image, logo, a start-up/shutdown
animation or a screensaver;
• assign the photo to an Addressbook entry;
• send the photo/video via MMS or
e-mail;
• save the photo in My stuff (p. 128)
or on the RS MultiMediaCard
(p. 129).
Switch on
C ¢R
The number of photos which can still
be taken in the selected resolution is
displayed in the top right-hand corner of the preview image. This
number varies considerably depending on the subject matter and how
much storage space is required.
The selected resolution is indicated
beneath the preview image or, if
video mode has been selected, there
is an indication as to how much recording time has already been used
and how much time is still available
for a video.
è Camera
ÙÚ
Or
È
É
Pressing the sidekey to
start the camera in standby mode.
Switch to single image.
and video recording.
The current (preview) image is displayed. You will see the following in
the first line from left to right:
Ù
Ú
Û
×
Brightness
Zoom factor
White balance (p. 49)
Flash connected
Premium
î Options
É
×
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Camera.fm
right page (47) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
48
Camera
Photo mode
Take a photo.
Display the preview image for the next photo.
The photo is saved with a name, the
date and the time. To enter the
name, see Settings in the options
menu.
Settings prior to taking a photo:
Set the brightness.
Set the zoom factor.
Image resolution
The quality of the image can be set in
four stages regardless of the preview
image resolution. The highest possible resolution is 1280 × 960 pixels.
To create your own display background, select the Wallpaper resolution (p. 85).
The resolution may decrease
depending on the selected digital
zoom.
Video mode
The video mode resolution is the
same as the preview image resolution. You can set two different
resolutions.
Start the video recording.
End the video recording.
A red dot appears in the top right of
the display while the video recording
is being made.
§Play§
Plays the video recording.
Flash (accessories)
If the flash is active, this is shown by
a symbol in the display. The flash is
constantly charged while connected
to the phone and switched on. This
reduces the stand-by time.
×
This symbol appears
when the flash is being
charged.
For settings, see options menu.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Camera.fm
left page (48) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Camera
Camera options
The following functions are available, depending on the current
situation.
§Options§
Open menu.
Settings
• Name for recordings
• Image resolution
• Colour mode: normal,
sepia, grey tones.
• Storage medium:
My stuff (p. 128) or
RS MultiMediaCard
(p. 129)
Pictures
Display list of photos.
Other videos Display list of videos.
Microphone Switch microphone on
on
or off.
Use flash
Choose between:
Automatic, Off, Red-eye
Auto-timer
The photo is taken approx.
15 seconds after triggering. For the last 5 seconds,
you will hear a beep each
second.
White balance
Choose between:
Automatic, Indoor,
Outdoor
(For standard functions see p. 22)
49
Additional information
Insufficient memory available.
Start the memory assistant to
delete specific data (p. 91).
Alternatively, you can transfer
data to the RS MultiMediaCard.
Ê
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Camera.fm
right page (49) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
50
Main Inbox
Main Inbox
The inbox folder offers immediate
access to the messages currently received. This means that you no longer have to look through all inbox
folders for the various message
types. The entries are marked with a
symbol to indicate their type and status. You will find an overview of the
symbols on p. 14.
To call up the inbox folder, e.g. if you
have received a new SMS:
ç
Press the softkey beneath
the symbol.
Or
Press in standby mode.
In the inbox folder you will find the
following message types:
SMS, MMS, E-mail
System messages
Notification about MMS, Missed alarm,
Missed appts., Missed calls, WAP push,
Voice message
Data objects
Ring tones, Pictures and Video, calendar entries, Notes and Business card.
When you open an entry,
the relevant application
also starts.
After a set period, entries which
have already been read and opened
are only displayed in the messagerelated incoming lists (see Settings in
the options menu).
Main Inbox options
§Options§
Open menu.
Receive
emails
Select set account and
send all e-mails.
Settings
If entries have been
read, remove them from
the Main Inbox:
Daily, Never,
Immediately
If Daily has been selected, specify the time.
(For standard functions see p. 22)
Additional information
Where applicable you will receive WAP
push messages from special servers.
These may contain information from the
service provider or important data such as
how to set up a connection profile.
§Accept§
For example, start setting
up a connection profile
automatically.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_UnifiedInbox.fm
left page (50) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
SMS
51
SMS
You can use your phone to transmit
and receive very long messages
(up to 760 characters). They are
automatically composed of several
“normal” SMS messages (note higher
charges).
Additionally, you can insert pictures
and sounds in an SMS.
Write/send
Text options
§Options§
Open menu.
Save
Picture&sound Add pictures, animations and sounds to
message (see following
text).
Insert from
Text module (p. 29),
Bookmarks, From 9
(Addressbook/Phonebook).
Format
The following is displayed
in the display line: text entry status, number of SMS
required, number of characters still available.
Font size: Small font,
Medium font, Large
font
Underline
Alignment: Default
alignm., Left, Center,
Right
Mark (highlight text with
the joystick)
Delete text
Delete the whole text.
Start sending procedure.
Send with...
Select SMS profile so
the SMS can be sent.
C ¢M¢Create new
¢SMS
Enter text.
You will find information
on writing texts with and
without T9 in the chapter
“Text entry” (p. 26).
Ï / J Select phone number
from the Phonebook/
Addressbook or enter it.
§Group§ If necessary, select
a group.
Save composed text in
draft list.
Confirm. The SMS is transmitted to the service centre to be sent and saved in
the Sent items list.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fm
right page (51) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
52
SMS
Picture&sound
Send pictures and sounds with or
without accompanying text.
Remember that these may be protected (DRM, p. 20).
With the text input field open:
§Options§
Open menu.
Select Picture&sound.
The selection is added to
the SMS.
The pictures which have been added
are displayed. Sounds are displayed
in the form of “wildcards”.
SMS to group
Def. sounds
You can send an SMS message as a
“circular” to a recipient group.
My anim.
Select list.
Confirm. The first entry
of the selected section is
displayed.
Scroll to entry required.
For Def animations/Def. sounds:
The selection is displayed/
played back.
Def animations
My sounds
The menu contains:
My pictures
For My anim./My pictures/
My sounds:
The selection is added to
the SMS.
§Group§
Start sending procedure.
The Addressbook is
opened.
 The list of groups is
displayed.
Select group.
Open group and highlight
all/individual entries.
Transmission is started after a security prompt.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fm
left page (52) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)
SMS
Read
53
Reply options
Arrival of a new SMS announced in the display.
Open Main Inbox (p. 50)
with the softkey beneath
it.
Reading the SMS.
Scroll through message
line by line.
ç SMS
01.05.2005
19:42
+ 12398765431
SMS text. . .
§Reply§
Open reply menu.
Write message
Create a new reply
text.
Edit
Edit received SMS or
add new text.
Answer is YES
Add Answer is YES to
the SMS.
Answer is NO
Add Answer is NO to
the SMS.
Please call back, Add a standard text as
Delay, Thank
a reply to the SMS.
you
Read options
§Options§
Reply
ì Options
Reply
You can answer the SMS that is currently open immediately. The newly
added text is placed above the received text.
Reply immediately.
Open reply menu.
Reply
See “Reply options”
above.
Picture&sound
Save picture/sound
contained in the SMS.
Zoom in
Enlarge or reduce text
display.
Archive
Move SMS message
to archive.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fm
right page (53) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
54
SMS
Lists
List options
All SMS messages are archived in different lists, according to their status.
(For overview of message symbols,
see p. 14):
Different functions are offered depending on the list.
Inbox
C ¢M¢Inbox¢SMS
The list of received SMS messages is
displayed.
Draft
C ¢M¢Draft¢SMS
The list of not yet transmitted SMS
messages is displayed.
Unsent
C ¢M¢Unsent¢SMS
The list of concatenated SMS messages not yet sent is displayed.
Transmission can be restarted.
Sent items
C ¢M¢Sent¢SMS
The list of sent SMS messages is
displayed.
SMS archive
C ¢M¢SMS archive
The list of SMS messages stored in
the phone is displayed.
§Options§
Send
Open menu.
Send or forward entry.
Send with... Select an SMS profile for
transmission.
Archive
Move SMS message to
archive.
(For standard functions see p. 22)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fm
left page (54) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)
SMS
Setting
SMS signature
C ¢ M¢Msg settings
¢SMS setup¢SMS signature
You can enter a “signature” with up
to 16 characters. This signature will
then be attached to each SMS except
for a §Reply§ and when changes are
made to an existing SMS.
SMS profiles
Message • Manual: Inquiry for all mestype
sages.
• Standard text: Normal SMS
message.
• Fax: Transmission via SMS.
• E-mail: Transmission via
SMS.
• New: You may need to obtain the required code number from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual, 1 hour, 3 hours,
6 hours, 1 day, 1 week,
Maximum*
* Maximum period that the
service provider permits.
Status
report
Receive confirmation of successful/failed transmission of a
message. This service may be
subject to a charge.
C ¢M¢Msg settings
¢SMS setup¢SMS profiles
Up to 5 SMS profiles can be set.
These define the transmission characteristics of an SMS. The pre-setting
depends on the SIM card inserted.
Activate profile
55
Select profile.
Select profile.
Direct
If activated, the reply to your
reply = SMS message is handled via
your service centre (for information, please contact your
service provider).
§Edit§
Open to edit the profile.
SMS via
GPRS
Service
center
Enter the phone numbers for
the service centre as provided
by the service provider.
Activate.
Set profile
Recipient Enter a standard recipient for
the profile.
Send SMS automatically via
GPRS (p. 94).
Save aft.
send
Sent SMS messages are
saved in the Sent items list.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fm
right page (55) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
56
SMS
More information on SMS
SMS status report
If the message cannot be transmitted to the service centre you are offered the chance to repeat the transmission. If this also fails, contact
your service provider. The Message
sent. message only indicates transmission to the service centre. This
will then attempt to relay the message within a certain period.
See also Validity period (p. 55).
Phone number in SMS
Phone numbers displayed
§highlighted§ in the text can be dialled
(A) or saved in the Phonebook/Addressbook.
Downloading ringtones
and logos
You can receive links for downloading ringtones, logos, screensavers,
animations and information about
applications with an SMS. Please
highlight this link and, by pressing
the Call key A, start the download.
Please check that the dial-in access is
configured (p. 97).
Remember that these may be protected (DRM, p. 20).
ã
SIM memory full
If the message symbol flashes the
SIM memory is full. No more SMS
messages can be received. You need
to delete messages or move them to
the RS MultiMediaCard.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SMS.fm
left page (56) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:21)
MMS
57
MMS
The Multimedia Messaging Service
enables you to send texts, pictures/
videos and sounds in a combined
message to another mobile phone or
to an e-mail address. All elements of
an MMS message are merged to
form a “slide show”.
Sounds can be recorded with the
sound recorder and/or loaded from
My stuff (p. 128).
Depending on your phone's settings,
you will receive either the complete
message automatically or notification that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Pictures/videos
Ask your service provider whether
this service is available. You may
need to register for this service separately.
Create
C ¢M¢Create new¢MMS
An MMS consists of the address
header and the content.
First select an object for processing
to be added to the first page of the
MMS:
Limits on picture size can be set in
the user settings.
Display picture/video
functions:
Insert picture
Open list to select a picture.
Insert video
Open list to select a video.
Camera
Activate the camera to take a photo
or record a video for the MMS
(p. 47).
Also possible.
An MMS may consists of a series of
pages. Each page may contain a text,
a picture/video and a sound. Remember that pictures and sounds
may be protected (DRM, p. 20).
Open
Display picture.
Write texts with the help of T9
(p. 26).
Save picture/Save video
Save picture/video for use later on.
Pictures and videos can be recorded
with the integrated camera and/or
loaded from My stuff (p. 128).
Rights details
Display properties, including any
user right restrictions (p. 20).
Delete item
Delete inserted picture/video.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
right page (57) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
58
MMS
Sounds
Text
SOUND
Select.
TEXT
Select and write the text.
Display sound functions:
The text functions are displayed (see also p. 26):
Insert sound
Open list to select a sound.
Record
Activate sound recording to record
sounds (p. 121).
Also possible.
Open
Play back sound.
Delete item
Delete inserted sound.
Save sound
Save sound to use later on.
Rights details
Display properties, including any
user right restrictions (p. 20).
Insert
Choose any of the following for
insertion: Text module, Bookmark,
From 9
Delete text
Delete text on current page.
Save text
Save text on the page as a text
module.
T9 input
T9 settings:
T9 preferred, Input language
Mark
Text processing together with Copy
and Insert.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
left page (58) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
MMS
Generation options
§Options§
Open menu.
Send
Send MMS.
Preview
Play entire MMS on the
display.
Picture...
See p. 57.
Sound...
See p. 58.
Text...
See p. 58.
Page...
Add page: Insert new page
after current one.
Delete Page: Delete current page.
Page list: Display available
pages.
Timing: Enter the lifespan
of a page in seconds.
Properties
Enter sending parameters
(p. 61).
Save as
templ.
Save created MMS as a
template. See also below.
Layout
Select one of four possible
layouts:
Text above, beneath,
beside (on left or right of)
picture.
Color...
Select the colours for:
• Pict. backgrd.
• Text backgrd.
• Text color
(For standard functions see p. 22)
59
Templates
C ¢M¢MMS templates
MMS templates are MMS messages
that are saved without an address.
They can be sent as new MMS messages or used as part of a new MMS.
A maximum of 10 templates can be
saved.
Create templates by writing a new
MMS or using an MMS which you
have already received.
§Options§
Open menu and select
Save as templ.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
right page (59) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
60
MMS
Send
Expanded address fields
The page(s) of the new MMS is (are)
already created and the MMS is
displayed.
Cc:
Address(es) of copy
recipient(s).
ç MMS
Subject:
Greetings from London
To:
+1234567654321 |
Size:
85 KB
Bcc:
Address(es) of copy recipient(s) who are not visible
to the other recipients.
Date:
Creation date.
Subject:
Enter a brief description.
Send to:
Enter one or more phone
number(s)/e-mail
address(es).
Ï Insert from Addressbook.
Display the size of
the current MMS in
kilobytes (KB).
Attachments:
Insert attachments.
More: Provide additional
address fields.
Open address entry.
Use delivery time:
Use specified send time.
If §Yes§:
Delivery date:
Send date.
Þ ß á
Ð í Options
Size:
Scroll downwards.
Start sending procedure.
The MMS is sent after
confirmation.
Delivery time:
Send time.
Symbols for status information
Þ
ß
á
Priority
Send report
Contains DRM (p. 20)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
left page (60) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
MMS
Sending options
§Options§
Open menu.
Send
Send MMS.
Play
Play entire MMS on the
display.
Edit
Display object selection so
that object can be changed.
Add
addressee
Add recipient from the current address directory.
Del.
addressee
Delete individual recipient.
Add
attchmnt.
Add attachment:
• Business card
• Appointments
• Picture
• Video
• Audio
• File
Receive
Depending on the setting (p. 63), an
MMS can be received in two ways:
Complete transmission
The complete MMS is sent to your
phone. This can take quite a while if
the MMS is large.
ç
Shown in the display.
Start reception. The MMS
is sent.
Preliminary notification
You are notified that an MMS is waiting to be received.
Shown in the display.
Page list
Display MMS pages for
viewing and/or changing.
Save as
templ.
Save created MMS as a
template.
§Accept§
The complete MMS is
sent.
§OK§
Display in Main Inbox.
(For standard functions see p. 22)
61
Open the notification.
Display sender/date.
Display the properties of
the MMS.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
right page (61) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
62
MMS
Read
Lists
An MMS has been received in full.
All MMS messages are saved in four
different lists (for overview of message symbols, see p. 14):
Select the MMS.
Start automatic playing of
the MMS.
Key functions for playback:
To the next page.
Press briefly once to return to the start of the
current page; press briefly
twice to return to the start
of the previous page.
Set volume.
C/ B
End.
The message details are displayed
when the MMS is complete.
Subject:
Description of the MMS.
From:
Information about the
sender.
Size:
Size of the MMS in KB.
Expanded address fields
Scroll downwards.
More:
Additional input fields.
Cc:
Copy recipient.
Attachments:
Save attachments.
Date:
Date received.
Symbols for status information
(see p. 60).
Inbox
C ¢M¢Inbox¢MMS
The list of MMS messages and notifications received is displayed. To receive an MMS at a later time, open
notification and press §Accept§.
Draft
C ¢M¢Draft¢MMS
The list of stored drafts is displayed.
Unsent
C ¢M¢Unsent¢MMS
The list of the MMS messages not yet
fully transmitted is displayed.
Sent items
C ¢M¢Sent¢MMS
The list of sent MMS messages is
displayed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
left page (62) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
MMS
List options
Setting
Different functions are offered depending on the list/situation.
C ¢M¢Msg settings
§Options§
¢MMS settings
¢Select function.
Open menu.
Play
Play MMS on the
display.
Edit
Display MMS for processing.
View
Display MMS for viewing
only (write-protected).
Send all
Send MMS.
Reply to all
Reply to MMS
immediately.
Forward
Enter recipient(s) for
forwarding.
Properties
Display message
parameters.
63
Connection profile:
Six MMS profiles can be set (5 in the
telephone memory, one on the SIM
card). The send properties can be
specified in them. In most cases,
they have already been set. If necessary, check with your service provider for details.
Activate profile
Select profile.
§OK§
Profile is activated.
Set profile
§Change§ Display list of profiles.
Receiv.all MMS Send all new MMS
messages immediately.
Select profile.
(For standard functions see p. 22)
§Edit§
Press. Make settings.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
right page (63) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
64
MMS
User settings
Retrieval:
Receive complete MMS or
only notification of arrival.
Automatic
Receive complete MMS
immediately.
Auto.homenet
Receive complete MMS immediately in home network.
Manual
Only receive the
notification.
Create
mode:
Free, Limited, Warning
May be used to receive a
warning message or to limit
the size of a message.
Set the MMS dispatch to suit your
requirements:
Delivery
report:
Request delivery confirmation for sent messages.
Default
priority:
Send priority:
Normal, High, Low
Expiry time: Select the period of time
in which the service centre
is to try to deliver the
message:
Manual, 1 hour, 3 hours,
6 hours, 1 day, 1 week,
Maximum*
* Maximum period that the
service provider permits.
Page
duration:
Enter the lifespan of a page
in seconds (standard requirement).
Scroll forward in Manual or
Automatic mode.
Size indica- Set max. message size and
tion: =
message handling.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MMS.fm
left page (64) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
E-mail
65
E-mail
Your phone has an e-mail program
(client). You can use it to create and
receive e-mails.
Write
Options
Different functions are offered
depending on the position of the
cursor.
§Options§
C ¢M¢Create new¢E-mail
Enter the address details for the
e-mail:
Open menu.
Send
Send e-mail.
Send later
Transfer e-mail into the
Unsent list.
Save
Save e-mail in the Draft
list.
To:
Enter one or more e-mail
address(es).
Ï Insert from Addressbook/Phonebook.
Subject:
Enter e-mail heading
(up to 255 characters).
Add addressee Add recipient from
the current address
directory.
Text:
Enter text.
Delete line
Delete current line.
Expanded address fields
More:
Open additional input
fields.
Insert from
Text module
Bookmark
From 9 insert from
the Addressbook/
Phonebook.
Add attchmnt.
My stuff Open to make
a selection. Remember
that pictures and
sounds may be protected (DRM, p. 20).
Delete text
Delete the whole text.
Text input
• T9 preferred
• Input language
Cc:
Address(es) of copy
recipient(s).
Bcc:
Address(es) of copy recipient(s) who are not visible
to the other recipients.
Attachments:
Add attachments such
as images and sounds.
To send
Press.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Email.fm
right page (65) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
66
E-mail
Receive/read
Attachments
C ¢M¢Inbox
Contains the e-mail attachments;
these can be saved in My stuff
(p. 128).
¢Select function.
Before an e-mail can be read, it must
be retrieved from the server. You
have two options:
§Options§
Open menu and select
Save attach.
Retrieve email
Lists
Only the message header in the Main
Inbox (p. 50) is sent. You can then
decide if you also want to receive the
contents:
All e-mails are saved in different lists
depending on their status (for overview of message symbols, see
p. 14):
§Options§
Open menu and select
Ret. content.
or if you want to delete the e-mail on
the server:
§Options§
Open menu and select
Del. on server.
Send/receive
The set access is selected and all
e-mails transferred to the Main Inbox
(p. 50). At the same time, completed
e-mails are transferred from the
Unsent list.
Inbox
C ¢M¢Inbox¢E-mail
The list of received e-mails is
displayed.
Draft
C ¢M¢Draft¢E-mail
The list of e-mails not yet transmitted is displayed.
Unsent
C ¢M¢Unsent¢E-mail
The list of e-mails not yet transmitted is displayed.
Sent items
C ¢M¢Sent¢E-mail
The list of transmitted e-mails is
displayed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Email.fm
left page (66) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
E-mail
List options
Setting
Different functions are offered depending on the list.
C ¢M¢Msg settings
§Options§
Retrieve
email
Ret. content Retrieve the contents from
the server if only the message header was received.
Del. on
server
¢E-mail setup
¢Select function.
Open menu.
Only transfer the message
header into the Main Inbox
(p. 50).
Delete the contents on the
server if only the message
header was received.
(For standard functions see p. 22)
67
Accounts
Before using this service you must
set the server access and your e-mail
parameters. You will receive the
necessary data from the service
provider.
Select account.
Activate access
Activate an account that
has already been created.
Set access
§Edit§
Start editing. Fill in thedata fields as specified by
your service provider.
General sett.
Enter an e-mail address to which a
Bcc (blind carbon copy) is always
sent.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Email.fm
right page (67) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
68
Voice message/mailbox
Voice message/mailbox
Save call divert number
C ¢M¢Msg settings
¢Voice message
Calls are diverted to this phone
number.
Most service providers provide a
mailbox in which a caller can leave
a voice mail for you
C ¢T¢Call setup¢Divert
• if your phone is switched off or
not ready to receive,
• if you do not want to answer,
• if you are making a phone call
(and if Call waiting (p. 89) is not
activated).
If the voice mail service is not part of
your service provider's standard
package, you will need to register,
and possibly adjust the settings manually. The following sequence may
vary from service provider to service
provider.
Settings
¢e.g. Unanswered¢Set
Or
§Mailbox§
§OK§
Enter phone number.
Press to divert call to the
mailbox number.
Registration with the network is confirmed a few
seconds later.
Listen to message
A new voice message can be announced as follows, depending on
the service provider:
The service provider supplies you
with two phone numbers:
À
Symbol plus beep.
Or
Save mailbox number
You call this phone number to listen
to the voice mails left for you.
ç
Notification via SMS.
Or
C ¢M¢Msg settings
Call your mailbox and play the message(s) back.
¢Voice message
Ï/ J Select number from
Phonebook/Addressbook
or enter/change it.
§OK§
Confirm.
You receive a call with an automatic
announcement.
Press and hold (if necessary enter mailbox number once). Confirm with
§OK§ and §Mailbox§ depending on your service provider.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Mailbox.fm
left page (68) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Chat room
Chat room
With Chat room you can transfer text,
audio clips, pictures and files straight
to and from one or more terminals
(mobile phone, PC). This function is
not offered by all service providers.
Please ask your service provider
about this.
Your dialogue partners are entered
in contact lists. When a connection
has been established, these lists
show who is available, whether he/
she wants to be disturbed and what
mood he/she is in at present.
GPRS must be switched on.
Fast access ...
C ¢M¢Chat room
¢Login
The current contact list or the overview is displayed (if necessary, set
account first, p. 74).
Specify your own status (p. 75)
§Options§
My settings
Open menu.
Select and make entries.
Start menu
Enter new contact
Select the access through
which the dialogue is to
take place
or
select Account (p. 74).
Msg. history
Read the messages from
the last session.
Settings
Exit
Settings for your representation, the applications and servers.
End application.
Select account (p. 74)
C ¢M¢Chat room
Login
69
Return to contact list.
§Options§
Open menu.
Set
Press, then:
Add contact
select and enter at least
the user ID.
Return to contact list.
Hold dialogue with new contact
(p. 73)
Select the contact.
Start dialogue.
Open editor.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
right page (69) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
70
Chat room
Write text.
Manage contacts
Send text ...
Select a contact.
... and so on.
§Options§
Open menu.
Set
Select.
Login
C ¢M¢Chat room¢Login
Select the last account used (see also
Automatic login: p. 75).
Contacts
Different functions are offered
depending on the selection:
Add contact
User ID:
Enter an unambiguous
user (login) name.
Nickname:
Enter your own nickname for the contact.
Friend:
The contact receives the
status Friend: and
access to personal information (p. 75).
Find contact
Search for contact.
Contact lists
When the connection has been established, the contact list or the
overview of the contact lists is
shown for selection.
In the contact list, you will find a list
of the most recently used contacts.
The first time you log in, an “empty”
contact list will be generated by the
server if necessary.
Displays in the list:
-Conversation
Displays online contacts for whom
there are messages.
-Online
Online contacts with whom no conversations are being held at present.
-Group
Groups for Inst. Messaging with
several contacts.
-Offline
Contacts who are not online at
present.
Delete contact Delete contact from the
list.
Block contact
No more messages are
received from the contact and the contact
receives no status information from you. This
function works for all
your lists.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
left page (70) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Chat room
Manage groups
Select one of the groups
you set up yourself.
§Options§
Open menu.
Set
Select.
Group settings
Different functions are offered depending on the selection:
Add member
Add a new group member,
see also Add contact.
Find member Search for group member.
Invite
Invitation to the contacts
in your own group to Inst.
Message.
Delete
member
Delete contact from the
group member list.
Add group
Add new group.
Find group
Search for group on the
server (also groups no
longer managed in the
list).
71
Create group Group ID:
Enter an unambiguous
group name.
Name:
Name of group.
Topic:
Topic of group.
Searchable:
Other people can look for
the group.
Welcome msg.:
Enter own greeting.
Create group Delete group.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
right page (71) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
72
Chat room
Create a new contact list
Contact list options
The current contact list is displayed.
§Options§
§Options§
Open menu.
Contact lists
Available contact lists are
displayed.
§Options§
Open menu.
Create
Select.
Contact list ID:
Give the contact list an
unambiguous name.
Name:
Allocate self-explanatory
name.
Open menu.
Details =
Additional information
about the contact or the
group.
My settings
Information on your current personal status
(p. 75).
Set
Functions for managing a
contact or a group.
Contact lists
Display contact lists for
selection.
Block listtp
Display all blocked contacts. Can be unblocked.
Confirm.
App. settings Set the application
(p. 75).
Exclude
End the application;
the server remains
connected.
Logout
Log off from the server
and return to start menu.
Help
Display help text.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
left page (72) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Chat room
Start Chat room
Options (individual contact)
A contact list must be displayed.
§Options§
Select a contact or a
group.
Start communication with
the contact.
The page with the Chat
room is displayed. When a
group is engaged in a dialogue, the name of the
sender is placed in front
of each contribution.
Open editor.
Write text.
Send text. The text appears in the Chat room
soon afterwards.
Naturally, you can also receive messages from contacts you do not
know. This will be pointed out to you
in the display, and you can either
switch to Inst. Message or ignore/
block the contact.
Open menu.
Send sound
73
Select and send a melody/
sound from the list (DRM,
p. 20).
Send picture Select and send a picture
from the list (DRM, p. 20).
Send other
Send any file.
Details
Information about the contact, if they authorise this.
Clear all
Delete all texts in the current Inst. Message.
Block
contact
No more messages are received from the contact
and the contact receives
no status information from
you.
This function works for all
your lists.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
right page (73) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
74
Chat room
Options (group contact)
§Options§
Open menu.
C ¢M¢Chat room
Leave group Exit group.
Details
Clear all
Setting
¢Settings
¢Select function.
Information about the
group:
Group ID:, Name:, Topic:,
Owner:
Account
Delete all texts in the current Inst. Message.
I/ C
Receiving objects
The list of available accounts is
displayed.
Select an account to establish a connection.
Or
§Accept§
Accept object
or
/Account sett.
Set up an account or change the settings as specified by the service provider. Depending on the service provider, the settings may not be
changeable.
§Reject§
Reject object.
Name:
Name of account.
Msg. history
URL:
Enter URL, e.g.
www.abc.com
C ¢M¢Chat room
User ID:
Enter an unambiguous user (login) name.
The messages from the last meeting
are displayed. You can read and delete the contributions.
Password:
Enter password (shown as
a series of asterisks).
If sounds or pictures are sent to you
during a dialogue, you will be informed of such in the display.
¢Msg. history
Requirement: The server must be
disconnected, see Exclude (p. 72)
and Automatic login: (p. 75).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
left page (74) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Chat room
My settings
App. settings
Information on your current personal status:
Settings for the application used:
Alias:
Your own alias under which
you can be found on the
server.
Screen
name:
Name to be displayed in
the group.
Mood:
Information about your own
mood, e.g.
Happy, Sad, Tired etc.
Status text:
General text information,
e.g. “Am at home”.
Availability: Availability:
Available, ,
Cellphone:
§Options§
Enter the phone number
with international dialling
code.
For each setting, specify
who is allowed to
view your personal
information:
Public
All contacts.
Private
Contacts designated as
Friend: (p. 70).
Hide
Nobody.
75
Automatic
login:
Auto-reconnect to the
last account used.
Timeout:
Time without action after
which the application is
terminated. However,
the server remains
connected.
Message info:/ Signal the receipt of
Online info:
messages: Yes/No
Signal given as:
• Audio
• Silent alert
• Pop-up
Popup windows
authorised: Yes/No
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Instantmsg.fm
right page (75) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
left page (76) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
CB services
CB services
C ¢M¢Msg settings
¢CB services
Some service providers offer information services (info channels, Cell
Broadcast). If reception is activated,
you will receive messages on the activated topics in your Topic list.
CB messages are displayed in standby mode; longer messages are
scrolled automatically.
Receive CB
You can activate and deactivate the
CB service. If the CB service is activated, standby time for the phone will
be reduced.
Topic list
You can add any topics to this personal list from the topic index. You
can preset 10 entries with their
channel numbers (ID) and, if applicable, with their names.
Topic
Select
§Options§
Open list menu.
If a topic is selected in the list you
can view it, activate/ deactivate it,
edit it or delete it.
CB languages
Receive Cell Broadcast messages in
only one specific language or in all
languages.
Displays
Ö, Õ
Topic activated/deactivated.
New messages received on
the topic.
Messages already read.
Zoom in
You can set three fixed sizes for the
presentation of the display texts
across the entire message range:
New topic Select.
Default
Medium font size
• If no topic index is available, enter
a topic with its channel number
and confirm with §OK§.
Zoom +
Large font
Zoom -
Small font
• If the topic index has already been
transmitted, select a topic and activate it with §Options§.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_CB.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
76
Surf & fun
77
Surf & fun
Obtain the latest information from
the Internet that is specifically adapted to the display options of your
phone. In addition, you can download games and applications to
your phone. Internet access may require registration with the service
provider.
Browser menu
§Options§
Open menu.
Homepage
Call up the pre-set homepage for the current profile.
Bookmarks
List bookmarks
Display list of bookmarks
stored in the phone.
Bookmark site
The current page is saved
as a bookmark.
Go to...
Internet
Enter URL to dial an Internet address directly, e.g.
wap.siemens.com
Reload
C ¢O¢Internet
Reload current page.
Show URL
Display the URL of the
page currently loaded for
sending via SMS/MMS/
e-mail.
History
Display most recently visited Internet sites.
Disconnect
Disconnect the Internet.
File
Save object on the current
page or save the complete page; display saved
pages.
Settings
Set or reset browser
(p. 78).
Exit browser
Close the browser.
Access to the service
provider
Direct call-up of the browser with
the URL from your service provider.
The browser is activated with the
pre-set option as soon as you call up
the function (Browser settings, p. 78;
may be specified/pre-assigned by
service provider).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Internet.fm
right page (77) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:15)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
78
Surf & fun
End connection
Browser settings
Press and hold to clear
down the connection and
close the browser.
Navigation in the browser
• Select a link.
• Settings, status on/off.
• Press briefly: one page back.
Connect
Network
´
³
No network
GPRS online
Enter special characters
§Options§
Open menu.
Settings
Select.
Browser
Set start option as well as
handling of pictures and
sounds plus send options.
Profiles
The list of profiles is displayed for activation/setting.
For more information, contact your service provider.
• One input field/link forward/back.
• Scroll one line.
Display symbols in the browser
(selection)
²
±
C ¢O¢Internet
Table of special characters
(p. 26).
List of special characters,
depending on the
situation.
Protocol
Set protocol parameters,
parameters push messages and abort
time as well as handling of
cookies.
Security
Set encryption.
Context
Reset session; delete
cache, history and cookies.
Your Internet browser is licensed by:
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Internet.fm
left page (78) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:15)
Surf & fun
79
Profiles
Bookmarks
Preparation of the phone for Internet
access depends on the service provider concerned:
C ¢O¢Bookmarks
Profil pre-set
In most cases, access profiles have
already been created for one or more
service provider(s).
List bookmarks
Display list of bookmarks
stored in the phone.
Select profile.
Activate profile.
Set profile manually
If necessary, please contact your service provider.
§Options§
Edit
Delete
Open menu.
Start processing. For the
Internet-specific settings
below, please contact your
service provider.
Delete selected profile.
Display URL/call up page
Select bookmark.
Call up URL.
Save
Bookmark site
The current page is
saved in the phone as
a bookmark.
Bookmark options
§Options§
Open menu.
Here you will find functions for
changing and managing bookmarks
and their folders. This includes editing individual entries with the corresponding URLs as well as deleting
and moving them to other folders.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Internet.fm
right page (79) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:15)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Surf & fun
80
Surf & fun
Games and Applications
Games and applications are offered
on the Internet. Once downloaded,
you can access these via the phone.
Most applications include instructions. Some applications and games
are already pre-installed on your
phone. You will find these described
under
www.siemens.com/m75
Requirements
Browser profile (p. 78) and access
(p. 97) must be configured already.
Download
Select the correct access depending
on whether you are loading games
or applications:
C ¢O¢Games
or
C ¢O¢Applications
Load or start games, or else start
applications or reload them with
Download-Assistant.
Description file only
Ì
The description file is
loaded for information
purposes only. The application/game itself must
be loaded separately.
or complete download
The application/game is
completely loaded.
Ë
Apply
Remember that applications/games
may be protected (DRM, p. 20).
Í
The executable application is saved on the phone
and can be started
immediately.
Download wiz.
C ¢O¢Download wiz.
You will not be left on your own
during the download!
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Games&Apps.fm
left page (80) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Surf & fun
Games&More options
Processing and managing your applications and folders:
Move
Move applications between
folders.
New folder Create and name new
folder.
Update
Reinstall an application
(update).
Security
Select a security level.
Reinstall
Repeat after transmission
error.
Properties
Show details of the application/folder (name, version,
size, path, producer, date).
HTTP
profile
Display profile list for
activation/setting
(For standard functions see p. 22)
81
Additional information
You can use the browser to download applications (e.g. ringtones, games, pictures, animations) from the Internet.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applications subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications and for any direct damage or consequential damage of whatever nature resulting
from the use of this application. For technical reasons, such applications and subsequent enabling
of certain functions are lost in the event of the device being replaced/re-supplied and may be lost if
it is repaired. In such cases, the buyer is required
to download or enable the application again.
Please ensure that your phone has Digital Rights
Management (DRM) so that downloaded applications are protected from unauthorised reproduction. These applications are then exclusively
intended for your phone and cannot be transferred from this even to create a backup.
Siemens offers no warranty or guarantee nor
does it accept any liability for the customer's ability to download or enable applications again or to
do so free of charge. We recommend that you
carry out a backup from time to time of the applications on your Windows® PC using the “Mobile
Phone Manager” (www.siemens.com/m75),
p. 130.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Games&Apps.fm
right page (81) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
82
Settings
Settings
Profiles
Profile settings
C ¢T¢Profiles
Edit a default profile or create a new
personal profile:
Several settings can be stored in a
phone profile in order, for example,
to adapt the phone to the surrounding level of noise.
• Six standard profiles are provided
with default settings. They can be
changed however:
Normal environment
Quiet environment
Noisy environment
Car Kit
Headset
• You can set two personal profiles
().
• The special profile Airplane mode is
fixed and cannot be changed.
Switch on
Select default profile or
personal profile.
Switch on profile.
Select profile.
§Options§
Open menu.
Change sett.
Select.
The list of available functions is
displayed.
When you have finished setting a
function, return to the profile menu
where you can change a further
setting.
Additional information
Call up the list in standby mode:
The profile list is displayed.
The active profile is identified with ·.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Profiles.fm
left page (82) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
Profile options
Open menu.
Airplane mode
Activate
Activate selected profile.
All alarms (appointments, alarm
clock) are deactivated. This profile
cannot be modified.
Change sett.
Change profile settings.
Switch on
Copy from
Copy settings from
another profile.
Rename
Change personal profile
(except default profiles).
§Options§
Car Kit
If an original Siemens car kit is used,
the profile is switched on automatically when the phone is inserted into
the cradle (see also p. 140).
Headset
The profile is only switched on automatically if an original Siemens
headset is used (see also p. 139).
83
Scroll to Airplane mode.
Confirm selection.
Confirm safety inquiry
again in order to activate
the profile. The phone
switches itself off automatically.
Normal mode
When you switch on your phone
again, the previously set profile will
be reactivated automatically.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Profiles.fm
right page (83) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
84
Settings
Topics
C ¢T¢Topics
Load a completely new visual presentation onto your phone. At the
press of a key various functions are
re-organised on a theme basis, e.g.:
Start up/shut down animation,
wallpaper, screensaver, start up/
shutdown melody, additional
animations.
Theme files are compressed to save
memory space. After being downloaded or called up from My stuff,
these are automatically unzipped
when activated.
Activating a new theme
Select theme.
Display theme preview.
Activate new theme.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Themes.fm
left page (84) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Settings
Settings
85
Display setup
Wallpaper
C ¢T¢Display setup
Set wallpaper graphic for the display.
Language
Choose graphic to be displayed instead of the provider logo.
¢Select function.
Set the language for the display text.
When “automatic” is set, the language of your home service provider
is used.
If a language that you do not understand happens to be set, the phone
can be reset to the language of your
home service provider with the following input (in standby mode):
*#0000# A
Text input
T9 preferred
Activate/deactivate intelligent text
entry.
Input language
Select language for text entry. Languages with T9 support are marked
with the T9 symbol.
Logo
Color scheme
Select colour skin, incl. background
image for the entire user interface.
Screensaver
After a specifiable time, the screensaver shows a picture in the display.
An incoming call and/or pressing any
key will end the function except if
the code protection is activated.
Change settings:
§Change§
Settings are displayed:
Preview
Display the screensaver.
Style:
Select Analog clock, Digital clock,
Bitmap, Energy saving
Picture:
Select image in My stuff.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Display.fm
right page (85) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
86
Settings
Timeout:
Greeting
Set period after which the screensaver starts.
Enter greeting to be displayed instead of animation when phone is
switched on.
Code protection:
The phone code is requested to close
the screensaver.
Auto key lock:
Automatic keypad locking if no key
has been pressed for one minute in
standby mode.
Unlocking:
Press and hold.
Note
The animated Bitmap screensaver and the
Digital clock considerably reduce the
phone’s standby time.
Start up anim.
Select animation to be shown when
phone is switched on.
Shutdn anim.
Select animation to be shown when
phone is switched off.
Large letters
You can choose between two font
sizes for the display.
Illumination
Set display illumination to brighter/
darker. The darker the setting the
longer the standby time.
Press the joystick repeatedly at the top/bottom to
adjust up or down.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Display.fm
left page (86) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Settings
Settings
Ring tones
Volume
C ¢T¢Ring tones
Set different volumes for types of
call/functions.
Set the signal tones on the phone to
suit your requirements.
¢Select function.
Ringer setting
Settings are displayed for
changing.
Select
Calls
On/off
Activate/deactivate all
tones.
PoC
Beep
Reduce ringtone to a
short signal (beep).
CB services
Messages
Alarm clock
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alternative. The silent alert can also be activated in addition to the ringtone
(e.g. in noisy environments). This
function is deactivated when the
battery is being charged and accessories are connected (except the
headset).
Settings are displayed for
changing.
Select from several silent
alert versions.
Confirm setting.
87
Organizer
System
Applications
§OK§
The ringtone sounds
again.
Set volume.
Confirm setting.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Ringtones.fm
right page (87) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
88
Settings
Assign ringtone
A ringtone which has already been
selected will be played or the list of
possible ringtones will be displayed
for selection.
d Calls
Assign a single ringtone to all phone
numbers in the Addressbook.
Group calls
Assign a different ringtone to each
group.
Other calls
Assign one ringtone to the remaining calls.
PoC
Assign one ringtone to PoC calls.
More melodies
Assign further ringtones for:
Messages
Alarm clock
Organizer
Startup melody
Shutdown mel.
or record new with:
Sound recorder (p. 121)
You will find a list of all supported
formats for ringtones in My stuff
(p. 129).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Ringtones.fm
left page (88) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
Settings
Call setup
Ö
Õ
Ô
C ¢T¢Call setup
¢Select function.
Hide ID
89
Condition set.
Not set.
Display if status is unknown (e.g. with a new
SIM card).
When you make a call, your phone
number can be displayed on the recipient's display (depending on the
service providers).
Clear all
All set diversions are cleared.
To suppress this display, you can enable the “Hide ID” mode for all subsequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
The most common condition for call
divert is, for example:
Call waiting
Set up call divert (example)
Unanswered
Select Unanswered.
(Includes the conditions
Not reachable, No reply,
Busy, see below)
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Confirm.
Set
Select.
Divert
Confirm.
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
Status check
You can check the current divert
status for all conditions. After a
short pause, the current situation
is transmitted by the network and
displayed.
Ï/J Select or enter the phone
number to which the calls
are to be diverted.
§Mailbox§ Use existing mailbox phone numbers, or
enter them if necessary.
§OK§
Confirm. After a short
pause, the setting is confirmed by the network.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_CallSetup.fm
right page (89) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
90
Settings
All calls
All calls are diverted.
Ç
Symbol in the top line of
the display in standby
mode.
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated (p. 31), you
will hear the call waiting tone during
a call (p. 33).
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g. when the SIM
card is changed).
Reactivate divert
The last divert has been stored. Proceed as
with “Set divert”. The stored phone number
is displayed. Confirm number.
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for B).
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The person you are
talking to does not hear this beep.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_CallSetup.fm
left page (90) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
Settings
91
Phone setup
Phone identity
C ¢T¢Phone setup
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
Key tones
Device check
After the last information page, a
self-test as well as individual tests
are offered. If you select Self test, all
individual test are carried out.
¢Select function.
Set the type of acoustic key
acknowledgement.
Info tones
Set service and alarm tones:
On/off
Activate/deactivate tones.
Extended If switched on, a wider
range of service tones is
available, e.g. end of
menu reached, network
connection interrupted.
Auto off
The phone switches off each day at
the set time.
Activate
§Time§
Press.
Enter time
(24-hour clock).
§OK§
Confirm.
Deactivate
§Manual§ Press.
§OK§
Confirm.
Software version
Display the software version for your phone
in standby mode:
# 0 6 #, then press §More§.
Memory assis.
The memory assistant will help you if
there is insufficient phone memory.
If required it can also be started automatically from applications.
After their capacities have been
checked, all files and folders are displayed along with their size and may
be viewed/opened and, if necessary,
deleted.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneSetup.fm
right page (91) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
92
Settings
File system
Fact. settings
Format
(Phone-code protected)
The telephone memory is formatted
and all saved data such as ringtones,
pictures, games, etc. is deleted.
The phone is reset to default values
(factory setting). This does not affect
the SIM card or the network settings.
Formatting may take longer than
one minute.
Clean up
Create more memory by deleting
temporary files no longer required.
Format card
All saved dataon the RS MultiMediaCard are deleted.
Eject card
Allows the RS MultiMediaCard to be
removed without loss of data.
Alternatively, in standby mode
enter:
*#9999#A
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneSetup.fm
left page (92) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Settings
Settings
Clock
§Options§
C ¢T¢Clock
Set
Set time zone.
Auto time
zone =
Have the time zone
automatically set by the
network.
Search city
Search for a city.
Help
Operating instructions.
¢Select function.
Time/date
The clock must be set correctly once,
at start-up.
§Change§
Press.
First enter the date (day/
month/year), then the
time (hours/minutes/seconds).
Additional information
If the battery is removed for longer than
30 seconds, the clock must be reset.
Time zones
The time zone can be selected in the
world map or a city list:
World map
Select the desired time
zone.
City list
Select a city in the selected time zone.
93
Open menu.
Date format
Select the display format for the
date.
Time format
Select 24h or 12h.
Buddhist date
Switch to the Buddhist year (not on
all phone models).
Show clock
Activate/deactivate time display in
standby mode.
Auto time
The timezone is identified
automatically.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Clock.fm
right page (93) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
94
Settings
Connectivity
IrDA
C ¢T¢Connectivity
¢Select function.
GPRS
(General Packet Radio Service)
Switch GPRS on/off.
GPRS is a method for transmitting
data faster in the mobile network.
Use GPRS and if the network has sufficient capacity, you can be connected to the Internet permanently. The
network provider charges only for
the volume of data transmitted.
Some service providers do not yet
support this service.
Shown in the display:
£
¢
¤
Activated and available.
Registered.
Temporarily interrupted.
GPRS info
Display the transmitted volume.
Activate/deactivate IrDA.
Your phone has an infrared interface. With this interface, you can exchange data such as pictures, ringtones, Addressbook entries,
business cards or organiser data with
other devices which also have an infrared interface.
The infrared interface is on the left
side of the phone. The distance between the two devices must not exceed 30 cm. The infrared windows in
both appliances must be aligned as
accurately as possible with each
other.
Shown in the display:
¯
®
IrDA activated.
During transmission.
If IrDA is activated, standby time for
the phone will be reduced.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fm
left page (94) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
Bluetooth® (BT)
Bluetooth is a short-range radio connection by means of which a headset
or car kit, for example, can be connected without the need for wires.
Using the Send/print function in the
options menu for the application
concerned you can also use this
route to send data.
With SAP (SIM Access Profile) a car
phone GSM module can, for example, use the access data from the SIM
card on your phone. There is no need
to swap the SIM card. It is possible
that SAP might not be supported by
your service provider.
Each Bluetooth device has its own
specific address and can be given a
self-explanatory name as an option.
Password protection ensures the security of a Bluetooth connection, as
does including the BT partner in a list
as a “confidential” device.
To establish a Bluetooth connection
between your phone and other
Bluetooth devices you must activate
Bluetooth.
The Bluetooth® word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Siemens are under
license. Other trademarks and trade
names are those of their respective
owners.
95
Activate/deactivate
Bluetooth.
My BT name: You can give
the phone a name when
you activate Bluetooth for
the first time.
If Bluetooth is activated, IrDA (infrared) is not active and vice versa.
If Bluetooth is activated, standby
time for the phone will be reduced.
B-tooth setup
Call up the setting functions (Bluetooth must be
activated).
• Search/Search all
Specify which BT devices are to be
searched for:
All
All BT devices
Audio
E.g. headset, car kit
Phone
Other BT phones
PC
Personal computer with
BT connection
Start search
The number and name of the
most recently found BT device are
displayed.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fm
right page (95) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
96
Settings
The search is ended and
the first 10 devices found
are shown in a list.
§Repeat§ Start new search.
§Options§
Scroll to entry required.
• Last connect.
Open menu.
Attempts to make connections to
devices in this list are rejected.
Display the name and address of the BT device.
Trusted
dev.
Add the device as confidential to the list of known devices. To do this, enter the
password for the other device. The device must first
be set to a “confidential
mode”. If the list is full it is
not possible to add another
device.
Add to the list of known devices (see below).
to black list Add to the black list (see
below).
Retry
To make selection easier, frequent
BT partners can be recorded in the
known device list. If entries are
“confidential”, no password query is
made.
Dial the device or start the
procedure for acceptance
as a “confidential” device
(see below).
Details
to known
list
• Known devices
Start new search.
List of most recently and/or still connected devices.
• Black list
List options
Each list offers different functions.
§Options§
Open menu.
Mark as
audio
If not possible automatically, specify device as an “audio” device.
Higher
priority
Move entry up the list so
that, for example, a specific
audio device is used first.
Lower
priority
Move entry down the list.
to known
list
Move entry to the list of
known devices.
to black list Move entry to the black list.
(For standard functions see p. 22)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fm
left page (96) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
• My BT name
Data services
The phone is given a name (max.
16 characters) – this is the name the
partner sees. If no name is given, the
phone uses the non-changeable device address.
Basic setting and activation of the
connection profiles for data transmission such as MMS, WAP.
• Visib.to others
Set how your phone should respond
to other BT devices. This means (if
“visible”) for example that the device
address or the BT name of your
phone is shown to other BT devices if
they request this in order to receive
or send data.
• Not visible
Your phone is not “visible” to other
BT devices. Known devices such as
Bluetooth-Headset/Car Kit continue
operating.
• Auto mode
Your phone is “visible” to other BT
devices for several minutes. You will
then be asked if “visibility” should
continue.
Shown in the display
Bluetooth activated.
Bluetooth visible to others.
Bluetooth during data transfer.
Call to Bluetooth device
accepted.
¨
©
ª
«
97
The phone default setting varies
from service provider to service provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be configured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens.com/mobilephonescustomercare in the FAQ section.
Select profile
Select the profile.
Confirm selection.
Set profile
Select the profile.
§Options§
Open menu.
§Edit§
Open the selection.
Select CSD settings, and/or
GPRS settings.
§Edit§
Make the settings as
specified by your service
provider.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fm
right page (97) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
98
Settings
HTTP profile
Fax/data
The phone default setting varies
from service provider to service
provider:
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be configured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens.com/
mobilephonescustomercare
in the FAQ section.
Make the settings.
Authentication
Activate or deactivate encrypted
dial-up (CSD connections only) for
Internet access.
Fax and data services must be enabled by the service provider. There
are variations in fax and data reception, depending on the network.
Please ask your service provider
about this.
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fm
left page (98) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
Rec voice/fax
(Only if no special fax or data number
is available)
Start the required communication
program on your PC and activate
the function on the phone during
the call (the PC will take over the
connection).
End transmission
End transmission with PC software
and/or press B.
Rcve fax/data
Your service provider has given you a
number for telephoning and a fax/
data number.
The call is signalled by a special ringtone and the type of call (fax or data)
is displayed. Now start the communication program on your PC to receive the fax/data.
99
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Connectivity.fm
right page (99) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
100
Settings
Security
Only ‚
C ¢T¢Security
(PIN2 or phone-code protected)
Dialling options are restricted to SIMprotected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually before dialling.
¢Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This prevents the phone from being used accidentally. However, you can still be
called and you can still make an
emergency call.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
In each case:
Press and hold.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (see also p. 34).
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
PIN code
For description, see p. 24:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card once the phone code is entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a different SIM card, enter the phone
code when requested.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Security.fm
left page (100) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Settings
Barring
101
When roaming
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit network password for network barring.
Your service provider will give you
this password. You may need to be
registered separately for each
barring.
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
All outgoing
All outgoing calls except emergency
numbers are barred.
Ö
Õ
Ô
Outgoing intl.
(International outgoing)
Only national calls can be made.
Out.int.x home
(International outgoing without home
country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
All incoming
The phone is barred for all incoming
calls (forwarding all calls to mailbox
provides a similar effect).
Status check
The following information can be
displayed after a status check:
Barring set.
Barring not set.
Status unknown
(e. g. new SIM card).
Clear all
All barrings are deleted. A password
which the service provider will give
you is necessary for this function.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Security.fm
right page (101) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
102
Settings
Network
Network info
C ¢T¢Network
The list of GSM networks currently
available is displayed.
¢Select function.
Line
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Select line
Select the currently used phone
number.
Display current phone
number.
Protected
(Phone-code protected)
You may limit usage to one phone
number.
Additional information
Special settings may be made for each
phone number (e.g., melody, call divert
etc.) To do this, first switch to the required
phone number.
Switch from phone number/connection in
standby mode:
Press.
§Line 1§
Press.
Æ
Indicates non-authorised
service providers (depending on SIM card).
Choose netwrk
Network search is restarted. This is
useful if you are not on your home
network or want to register on a different network. The network list is rebuilt when Auto network is set.
Auto network
Activate/deactivate, see also Choose
netwrk above. If “Automatic network”
is activated, the next network on the
list is dialled in ranking order of your
“preferred networks”. Otherwise a
different network can be selected
manually from the list of the available GSM networks.
Preferred net
Enter your preferred service providers here for when you leave your
home network (e.g. if there are differences in price).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Network.fm
left page (102) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Settings
Your service provider is displayed:
§List§
Display list of preferred
networks.
Create/change entry:

or select an existing entry,
then select a new service
provider in the list and
confirm.
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and
save it.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred network is inadequate when you switch on the
phone, the phone may register in a different network. This can change when the
telephone is next switched on or if another
network is selected manually.
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, network reconnection is speeded up
(standby time is reduced).
User group
103
Depending on the service provider,
you can create groups with this service. These can have access to internal (company) information, for example, or special rates apply. Please
check with your service provider for
details.
Active
Activate/deactivate function. “User
group” must be deactivated for normal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are obtained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be
made within this standard user
group (depending on the network
configuration).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Network.fm
right page (103) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
104
Settings
Accessories
C ¢T¢Accessories
¢Select function.
Automatic settings
• Permanent illumination:
switched on.
• Key lock: switched off.
Car Kit
• Charging the phone battery.
Only in combination with an original
Siemens handsfree car kit (see
p. 140). The car kit profile is activated automatically when the phone is
inserted into the cradle.
• Auto. activation of the car kit profile when phone is inserted in the
cradle.
Auto answer
(factory default: off)
Calls are accepted automatically after a few seconds. Eavesdropping is
possible!
Å
Shown on the display.
Automatic switch off
(factory default: 2 hours)
The phone is powered by the car's
power supply. You can adjust the
time between switching off the ignition and the time at which the phone
switches off automatically.
Car loudspk.
Improves playback in certain
circumstances.
Headset
Only in conjunction with an original
Siemens headset (see p. 139). If an
original Siemens headset is used the
profile is automatically activated
when the headset is plugged in.
Auto answer
(factory default: off)
Calls are accepted automatically after a few seconds (except where the
ringer is switched off or set to beep).
You should therefore be wearing the
headset.
Automatic setting
Accept call with Call key or PTT key
(Push-To-Talk), even when the auto
key lock is activated.
Auto answer
If you do not notice that your phone has accepted a call, there is the danger that the
caller may eavesdrop.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_SetupAccessory.fm
left page (104) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
My menu
My menu
C Press.
§My menu§ Press.
Create your own menu with frequently used functions, phone numbers or Internet pages.
The list of 10 entries is preset. You
can, however, change it as you wish.
Use
Select the required entry.
Confirm.
Or
If the entry selected is a
phone number, you can
also dial it with the
Call key.
105
Change menu
You can replace each entry (1–10)
with another entry from the selection list.
§Change§
Select the required entry.
The function list is opened
for selection.
Select the new entry from
the list.
Confirm. The entry is
saved.
If Phonebook is selected,
the phone number must
also be selected; if Internet
is selected, the bookmark
must also be selected.
Reset all
(Phone code required)
§Reset all§ Select. After a security
prompt, the pre-assignment is reset.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyMenu.fm
right page (105) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
106
Fast access
Fast access
You can assign one important phone
number or function to each of the
two softkeys and number keys 2 to 9
(speed-dial numbers). The phone
number can then be dialled or the
function can be started at the touch
of a button.
£
Service provider
Softkeys
Change
For example, the Internet function is
assigned to the softkey. To change
this (in standby mode):
§Internet§
Press briefly.
§Change§
Scroll to new assignment
in the list.
Confirm.
• Special case Phone number. Choose
a name from the Phonebook/
Addressbook for assignment to
the key.
01.05.2005
Internet
ì
10:10
Help
Additional information
The service provider may have already assigned functions to a softkey (e.g. access to
“SIM services” or direct call-up of the Internet portal). It may not be possible to modify
this key assignment.
The left softkey may sometimes be replaced automatically by p/À to access
a new message for example.
• Special case Bookmark. Scroll to a
URL in the bookmark list for assignment to the key.
Apply
In standby mode:
Application
The “Internet” is just used as an
example here.
§Internet§
Press and hold; the application is started.
Phone number
The assignment “Carola” is used here
only as an example.
§Carola§
Press and hold. The phone
number is dialled.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FastDial.fm
left page (106) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:20)
Fast access
Speed dialling keys
Number keys 2 to 9 can be used as
speed dialling numbers for fast access. Number key 1 is reserved for
the mailbox phone number (p. 68)
and number key 0 is reserved for
switching between two connections
during use (p. 102).
Change
In standby mode:
Press number key briefly
(e.g. the 3).
If this number is still free:
§Set§
Press.
Select a new function
from the list and confirm
with §OK§.
Or
If an assignment has already been made to this
key (assignment displayed above the right
softkey): e.g. Games.
§Games§
Press briefly.
§Change§
Scroll to application in the
list.
Confirm.
107
• Special case Phone number. Choose
a name from the Phonebook/
Addressbook for assignment to
the key.
• Special case Bookmark. Scroll to
a URL in the bookmark list for
assignment to the key.
Apply
Select a stored phone number or
start a stored application (e.g.
Calendar).
In standby mode:
Press briefly.
The assignment of the number key 3
is displayed above the right softkey
e.g.:
§Calendar§ Press and hold.
Or simply
Press and hold.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FastDial.fm
right page (107) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:20)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
108
Organizer
Organizer
Calendar
Daily view
C ¢Q¢Calendar
Special displays:
You can enter appointments in the
calendar. Time and date must be set
for the calendar to work correctly.
The calendar offers you three views:
Monthly view
Special colour coding:
Day with entries for appointments,
day-long appointments, weekends.
Navigation:
One day forward/back.
One week forward/back.
Daily view open.
Weekly view
Special displays:
Appointments are shown as a horizontal colour bar on the vertical hour
division.
Navigation:
One day forward/back.
Forward/backward by the
hour through the day.
Description of appointment.
Navigation:
One day forward/back.
To the start/end of the day
or next/last entry.
Calend. setup
C ¢Q¢Calend. setup
Start of day:
Time when the working day begins.
Start of week:
Weekday on which the monthly and
weekly view on the left starts.
Weekend
Set the days for the weekend.
Show birthdays:
Shown in the display
Synchronising with a PC
With the mobile phone manager (p. 130)
you can synchronise appointments, tasks
and memos with Outlook® or Lotus
Notes™.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fm
left page (108) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Organizer
Appointments
109
C ¢Q¢Appointments
Different input/selection fields are
displayed depending on the type.
The number of fields can be restricted, see Default, p. 110.
Enter new appointment
Description:
Description of nature of
appointment.
Appointments are displayed in chronological order in a list.

Select.
Category:
Memo
Text input for description.
Voice memo
Location:
Location of appointment.
Call
Whole day:
All-day appointment: Yes/No
Enter phone number to
be displayed with the
alarm.
Text input for description.
Vacation
Enter start and end date.
Voice memo:
Enter a voice recording, see
Dictat.machine, p. 112.
Enter voice memo.
Shown with alarm.
Meeting
Phone number:
Enter a phone number or select one
from the Addressbook.
Birthday
Enter name and date.
Start date:
Date when appointment starts.
Start time:
Time when appointment starts.
End date:
Date when appointment ends.
End time:
Time when appointment ends.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fm
right page (109) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
110
Organizer
Information on the alarm
Alarm:
On/off or Silent alert.
Enter the period of time
before the appointment
and select the time unit:
Minutes, Hours, Days
Recurrence:
Select a timeframe for repeating the
appointment:
No, Daily, Weekly, Monthly, Yearly
Enter a parameter for repeating:
Forever, Until, Events (number)
If Weekly is selected, certain weekdays can be highlighted.
All fields/Reduced fields
In the list, select those fields which
are to be offered for future entries.
Additional information
Display above set alarms:
¹
Alarm clock
»
Appointment
An alarm sounds even when the phone is
switched off (except in aircraft mode,
p. 83). The phone does not go to standby
mode. Press any button to switch the alarm
off.
When the set date and time are
reached there is an audio and a visual alarm. If an alarm is missed it appears in the list of missed appointments (p. 111).
Alarm type Memo:
Meeting: The text is shown in the
display.
Alarm type Call: The phone number
is displayed and can be dialled immediately.
Alarm type Birthday: You can send
special birthday greetings by SMS,
MMS, e-mail or a call via §Options§.
Use Pause to set the alarm to repeat.
Tasks
C ¢Q¢Tasks
A task is displayed like an appointment in the agenda of the selected
day. However, unlike an appointment it does not require a time.
When no time is entered the task appears at the top of the list every day
until it is marked as completed.
The entries are made in the same
way as Appointments (see “Appointments”). Then:
Status:
Select Done or Outstanding.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fm
left page (110) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Organizer
Priority:
Select 5 levels from Lowest to Highest.
Date used:
If activated with Yes, the following
time input option is offered.
Date due:/Due time:
Enter the date and time by which the
task is to be completed.
Alarm: As for Appointments.
Notes
111
Missed appts.
C ¢Q¢Missed appts.
Events with an alarm (Appointments,
Tasks) to which you have not reacted
are listed for reading.
Organiser options
Depending on the application used
(Calendar, Appointments, Tasks, Notes)
and the current situation, different
functions are offered.
C ¢Q¢Notes
§Options§
Open menu.
Write and manage brief text notes.
Delete
Delete entry.
Enter a new note
Delete by

Select.
Delete all entries prior to a
certain date.
Delete all
Delete all entries after
confirmation.
Delete
done
Delete all completed tasks.
Enter text. The first line is
displayed as a “title” in the
notes list. Total length:
max. 160 characters.
§Options§
Open menu.
Save
Save note. When Confidential is selected, a note is
protected with the phone
code.
Activate/
Switch alarm on/off.
Deactivate
Filter
Display all entries with the
selected feature.
Confidential
Protect note with phone
code. We recommend that
you do not store any passwords (PIN, TAN etc.) as
notes.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fm
right page (111) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
112
Organizer
Dictat.machine
C ¢Q¢Dictat.machine
Use the dictating machine to record
short voice memos.
• Use your phone as a dictating machine when on the move.
• Record a memo as a reminder or
as a note for others.
• Add a voice memo to an appointment in the calendar.
New recording

Select.
The remaining time available, as well as the recording time, are shown in the
display.
A brief beep sounds when
the recording starts. Now
dictate the text.
Switch between pause/
record.
End recording.
The recording is automatically saved with a time
stamp.
Rename with §Options§.
Playback
D/E
Select the desired
recording.
Switch between playback/
pause.
Press and hold for rapid rewind and fast forward.
Dictating machine options
§Options§
Handsfree
Open menu.
Playback through the
built-in loudspeaker.
(For standard functions see p. 22)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fm
left page (112) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Organizer
Time zones
C ¢Q¢Time zones
The time zone can be selected in the
world map or a city list:
World map
Select the desired time
zone.
City list
Select a city in the selected time zone.
Time zone options
§Options§
Open menu.
Set
Specify the time zone.
Auto time
zone =
The time zone is switched
automatically to local time
by the network.
Search city
Search for a city.
Help
Operating instructions.
113
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Organizer.fm
right page (113) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
114
Extras
Extras
SIM services (optional)
Playing music
C ¢S¢SIM services
You can play music by
Your service provider may offer special applications such as mobile
banking, share prices, etc. via the
SIM card.
If you have such a SIM card, the SIM
services will appear in the main
menu under “Extras” or directly
above the softkey (on the left).
Symbol for SIM services.
Where there are several applications,
these are displayed in a SIM services
menu. With the SIM services menu,
your phone can support future additions to your service provider's user
package. For further information,
please contact your service provider.
• Starting the Music player and selecting a track or a playlist.
• Selecting a music file directly from
My stuff and opening it.
Displays
Music Player entries appear in the
following order:
Folder – Playlists – Music files
New play list

Select.
Music player
C ¢S¢Music player
With the Music Player, you can play
music files, e.g. in AAC format, and
group together several tracks as a
playlist. Music files and playlists are
stored by default in My stuff/Sounds.
Music files can, for example, be
downloaded from the Internet or
transferred to the telephone via a PC
connection (p. 20).
Press and hold to lock/unlock keypad, when a music file is playing.
Enter a name for the
playlist.
Select the required track.
Repeat the process until the playlist
is complete.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (114) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Extras
Music Player options
§Options§
The recipient can also use a mobile
phone, as well as a PC with an Internet connection and headset (depending on service provider).
Open menu.
Different functions are offered
depending on the situation.
To use the application, GPRS (p. 94)
must be switched on and PoC
(p. 120) activated.
Shuffle
Random playback of
tracks in the current
directory.
Repeat
Repeat tracks in a playlist.
New play list
Create a new playlist.
Add to play
list
Add a track to the playlist.
Properties
Display information about
a track or a playlist.
(For standard functions see p. 22)
PoC
115
This application can be used to simultaneously connect multiple subscribers. Like a normal Walkie-Talkie,
only one subscriber can speak at a
time. The others can only listen until
the speaker allows others to talk.
A recipient is selected using their
PoC address (PoC ID) or their phone
number. Groups created in advance
(p. 118) can be invited to a session.
Your service provider will supply you
with your own PoC address.
Preparing a session
From the Addressbook
Open Addressbook
(in standby mode).
Select an entry with a PoC
ID(Com. services).
The session with the selected subscriber is started. For details of how to
invite additional subscribers, see p. 116.
From standby mode
C ¢S¢PoC

Select.
The possible functions as well as
already added subscribers are
displayed.
You have several options to combine
the subscribers:
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
right page (115) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
116
Extras

Search and mark recipient
in Addressbook.
Add recipient.
Speaking rights
The list of subscribers is displayed.
The current authorised speaker is
shown in bold.
Or

Select a subscriber from
an earlier session.
Or

Enter PoC ID of a
recipient.
§Selection§ Add entries.
Or

Returning speaking
rights.
Additional information
Depending on the setting for Hold mode
(p. 120) b must be pressed and held as
long as one speaks.
If the person with speaking rights takes
a long pause, the speaking rights are automatically released again.
Select group.
Inviting additional subscribers
Open
You can invite additional subscribers
during a session.
Select and mark recipient.
§Options§
§Selection§ Add recipient.
Starting a session
If all the desired subscribers are combined, start the session:
Request speaking rights.
The delegation of speaking rights is displayed and
then the requester can
talk.
The subscribers are displayed, and the authorised speaker is shown in
bold.
Open menu, select Invite
and mark new subscribers.
You are being invited
The invitation is shown in a window.
You can accept/refuse this invitation.
Accept the invitation.
The list of subscribers is displayed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (116) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Extras
Leaving the session and ending
PoC options
Only if you yourself started the
session.
§Options§
§Options§
Open menu.
End session
Select. You will leave and
end the current session.
Letting the session run in the
background
The current session remains open in
the background and you can listen
to the calls. A phone call ends the
session.
Press.
View the session again:
C ¢S¢PoC ¢Sessions
Open menu.
Different functions are offered
depending on the situation.
History view
Display of subscribers in
order of speaking.
Session view Display of subscribers for
the current session.
End session
End session.
Session
details
Start time, Status,
Duration, Type etc.
User details
Display subscriber properties (see also
My presence, p. 119).
Add to d
Save PoC ID in Addressbook.
Invite user
Invite a subscriber to
a session.
Press and hold.
Request speaking rights:
117
Add to group Add subscriber to the
group.
Clear
Delete the list except for
the last entry.
Handsfree
Switch on handsfree talking (loudspeaker).
Request
pres.
Request information
about the readiness to receive for a subscriber.
Volume
Set volume. I is also
possible.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
right page (117) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
118
Extras
Sessions
Groups
C ¢S¢PoC ¢Sessions
C ¢S ¢PoC
Display subscriber list for the current
session. The authorised speaker is
shown in bold.
Records
C ¢S¢PoC
¢Records
Select the list of received and made
PoC calls as well as the option to delete all lists.
You can mark subscribers for one
session in the list.
Start session.
The function Save as group in §Options§
can be used to combine entries in
the list into a new group.
¢Groups
Only your groups are displayed and
can be edited.
Setting up a new group

Select.
Fill in input fields:
PoC ID:
Subscriber ID.
Name:
Group name.
Type
Now or Chat.
Max users: Maximum number of
group members ("0"
means "no limit").
Membership:
Set if membership in this
group is open to everyone
(Open) or if the subscriber
is limited to the member
list (Limited).
Memberlist Add member to the
group.
Reject list List of subscribers which
may not become members of this group.
§Save§
Save group.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (118) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Extras

My presence
List of subscribers with whom a
session is not desired. Invitations
from this list are always refused
automatically.
C ¢S¢PoC

List of subscribers whose invitation
is automatically accepted (see also
Auto answer p. 119).
Starting a session (group conversation)
§Options§
¢Presence¢My presence
The following properties (yours) can
be set:
Interruption
Allow, forbid interruption
Mood
Display your mood.
Notes
Note.
Select group.
Settings
Start session.
C ¢S¢PoC
Viewing group properties
Select group.
View properties.
Open menu.
Add to d
Copy group ID to the
Addressbook.
Edit
Edit (your own) group.
Copy ID to clip Save group ID (PoC ID)
in the clipboard.
Memberlist
Display the member list.
Reject list
Display the refused
subscribers.
119
¢Settings
Some settings must be made by the
user or can be copied from your service provider.
Select and confirm the
function, area.
Load settings
Download settings from the server
of the service provider.
PoC online
Log in/out, status information for
login.
Block PoC calls
Allow/block PoC calls.
Auto answer
Automatically accept invitations because of the Accept list (p. 119).
Use Acc.& Rej.
Activate/deactivate the use of Accept
list/Reject list (p. 119/p. 119).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
right page (119) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
120
Extras
PoC
• PoC enabled
Activate/deactivate PoC.
• History length:
Number of entries in the list.
• Timeout(min.):
PoC is put in the background if not
used after an adjustable amount
of time.
• Hold mode
Depending on the setting, b must
be pressed and held to speak.
• Default view
Session view or History view.
• Request pres.
The saved properties are displayed.
Server
Settings for the server. Please check
with your service provider.
Alarm clock
C ¢S¢Alarm clock
The alarm will ring at the time set by
you, even when the phone is
switched off.
§Edit§
Press to set.
Activate/deactivate the
alarm.
Switch to time setting.
Set alarm call time
(hh:mm).
Switch to week days.
Navigate to the various
days.
Display options: alarm call
time and days.
é Alarm clock
Advanced
Further settings. Please check with
your service provider.
Additional information
If an accessory such as the car kit is connected, its PTT key also functions as
a PoC-key.
¹
§On§
07:30
Mo Tu We Th Fr Sa Su
Edit
ì
OK
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (120) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Extras
Set days for alarm calls.
Press again to delete the
highlighting.
Press and hold to highlight/unhighlight all the
days.
§OK§
¹
Sound recorder
Use the sound recorder to record
noises and sounds for use as ringtones. The sound recorder is usually
started from other applications/functions such as assigning a ringtone.
New recording
Start from main menu
A brief beep sounds when
the recording starts.
Switch between pause/
record.
End recording.
The recording is saved
with a timestamp in the
Sounds folder.
Rename with §Options§.
Confirm setting.
Additional information
Screen display in standby
mode: alarm clock activated.
Use Pause to set the alarm to repeat.
121
If starting from another application,
e.g. create MMS:
§Insert§
Transfer the recording
into the application.
Playback
D/E
Select the desired
recording.
Switch between playback/
pause.
Press and hold for rapid rewind and fast forward.
Open menu.
C ¢S¢Sound recorder
§Options§
or also start from another
application:
Handsfree
Playback through the
built-in loudspeaker.

Select.
Set as...
Set the recording as a
ringtone.
The remaining time available, as well as the recording time, are shown in the
display.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
right page (121) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
122
Extras
Calculator
Calculator options
C ¢S¢Calculator
§Options§
The calculator can be used in a basic
version and with an advanced range
of functions. The input line and two
calculation lines (including the matrix with the calculation functions)
are located in the top half of the
display.
F/I
Enter digit(s).
Navigate functions.
Use function.
Enter digit(s).
Use function. The result is
calculated and displayed
immediately.
Basic functions
+, -, *, /
Basic calculation types
Result
1/x
Reversion
Convert to percentage
Decimal point.
±
Sign change “+”/“–”
§Options§ Expansion of the range of
functions:
Square root
Square
Exponent
MS
Save displayed number
MR
Call up saved number
M+
Insert number from memory
Open menu.
Convert
Call up the unit converter with the current
result.
Clear all
Delete all units.
Extended mode/
Basic mode
Convert calculation
functions.
Memory save,
Memory recall,
Memory clear
Save or recall result;
delete memory.
(For standard functions see p. 22)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (122) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Extras
Unit converter
C ¢S¢Unit converter
You can convert various measurement units into other measurement
units.
The following types are offered with
various units:
123
You can use both input fields
alternately.
Opens the calculator with
the current converted
value.
Special key functions:
Set decimal point.
Change sign.
Velocity
Energy
Mass
Pressure
Currency
Time
Volume
Area
Length
Power
Temperature
When you call up the function, you
must enter a base currency into
which the conversions are to be
made.
Currency
Example for Velocity units:
Type
Units
Velocity
Kilometers/h, Meters/sec,
Miles/h, Miles/sec, Knots,
Mach
Converting the units/currency
Enter currency
(e.g. Euro).
§Save§
Store entry.
Now enter the name and exchange
rate of the currency to be converted.
§Options§
Open menu.
Add currency Enter new currency and
exchange rate.
Select the source unit/
currency.
Set as base
Use entered currency as
base currency.
Switch to the input field.
Edit rate
Enter the quantity to be
converted.
Change the exchange
rate of the base currency.
Calc.
Start calculator.
Switch to the selection
field.
Select the target measurement unit/currency.
The result is displayed.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
right page (123) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
124
Extras
Stopwatch
C ¢S¢Stopwatch
Two intermediate times can be
recorded and saved.
Display, also in standby mode.
§Start§/§Stop§
Save intermediate time.
After a stop:
§Reset
Reset to zero.
Stopwatch options
§Options§
Stopwatch
list
Open menu.
Display saved entries.
(For standard functions see p. 22)
Countdown
C ¢S¢Countdown
A set time elapses. The last 3 seconds are indicated by a beep. At the
end a special beep sounds.
Display, also in standby mode.
If no time has been entered:
Open input window.
Set period of time.
Confirm.
Start countdown.
If a countdown time is specified:
Start countdown.
While the time is elapsing:
Interrupt counter.
Let counter continue
running.
§Reset§
Reset counter to starting
time.
§Edit§
Enter new period of time
and confirm with §OK§.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (124) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Extras
Remote synchronisation
Server sett.
C ¢S¢Remote sync.
Providers
You can use this function remotely
to access externally filed data (addresses, calendar, etc.) and synchronise these with the data on your
phone. The data can, for example,
be saved on a company computer or
the Internet e.g.:
www.siemens-mobile.com/syncml
Synchronise
§Sync§
§Next§
The computer is selected
and synchronisation started. When completed, the
actions which have been
performed are displayed.
Scroll through the various
displays.
125
Display the current service
provider.
Homepage: e.g. www.siemensmobile.com/syncml
Port:
Enter port number e.g. 80.
User name: Enter user name (login
name).
Password:
Enter password (shown as a
series of asterisks).
Calendar path:, Contacts path:,
Notes path:, Tasks path:
HTTP authentication.
Confirmation required;
Yes/No (if No, the input
fields are not visible).
HTTP name: Enter name.
HTTP
password:
Enter password.
Sync. setting
The following settings can be made
prior to synchronisation:
Last sync:
Time of the last synchronisation.
Active profile
You can choose between 5 profiles.
Sync. mode
• Sync data: Modified data or All data
Select profile.
Activate profile.
Or
§Edit§
Set profile.
• Sync instruction: Two-way, Device update or Server update
Sync items:
Highlight database areas to be
synchronised:
Calendar, Contacts, Notes, Tasks
Save settings.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
right page (125) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
126
Extras
Device manag.
Active profile
C ¢S¢Device manag.
A standard profile for downloading
the current software of the operating system is displayed.
If you were informed about software
updates by a push message, you can
establish a connection to the provider's server using the Device manager, so you can download them.
When downloading is finished, you
will be asked to switch the phone off
and on again. Afterwards, the software of your phone will be updated.
Please follow the instructions in the
display.
The phone default setting varies
from service provider to service provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then select and activate profile.
• The access profiles must be configured manually. If necessary,
check with your service provider
for details. You will find the current settings for the service provider on the Internet at
www.siemens.com/
mobilephonescustomercare
under "FAQ".
§Sync§
Or
§Edit§
Or
§Edit§
Establish a connection to
the active profile.
Call up profile list.
Select profile.
Activate profile.
Set profile.
Last connect.
Display last connection.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Extras.fm
left page (126) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Media player
127
Media player
The Media Player is started by the application if you play a media file that
has been received by SMS/MMS or
downloaded from the Internet.
Press briefly to scroll to the
next media file.
0– 9 Switch on display
illumination.
Pictures
§Send§
Play or stop, depending
on the situation.
Set volume.
Switch to mute.
Pause function.
Zoom function if the displayed picture has a higher resolution than the
display.
End playback.
The joystick moves the
picture detail.
Different functions are offered depending on the starting situation
and the object.
5 Centre the picture.
The media playback offers the following functions for music, playlist
and video playback:
§Stop§
The following functions can be applied to a displayed picture:
Melodies/playlists/video
Switch to full screen
mode and back again.
Send via MMS or e-mail,
for example.
Options
§Options§
Open menu.
Volume
Set the volume with the
joystick.
Set as...
Set picture as Wallpaper,
Logo, for example, and
sounds, for example, for
Incoming call, Startup
melody.
Slideshow
Automatic run-through in
full screen mode. Change
individual picture with
joystick.
Edit
Access to picture editing.
(For standard functions see p. 22)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MediaPlayer.fm
right page (127) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
128
My stuff
My stuff
To organise your files, you can use
the file system like a PC file manager.
There are separate folders for the
various data types in My stuff. If, for
example, you want to download
new pictures or sounds, the download function is contained in the relevant folder.
§Options§
Open menu.
Move
Place highlighted file(s)
or folder in temporary
memory.
Copy
Place highlighted file(s)
or folder in temporary
memory.
Paste
Transfer content of temporary memory into current
folder.
New folder
Create a new folder and
name it.
Preview/
List view
Switch over to miniature
view/view of list.
Select file/folder in lists.
Properties
The cursor can be moved
as required in the preview.
Display information on file
or folder selected.
Format card
Format inserted
RS MultiMediaCard.
Eject card
Allows the RS MultiMediaCard to be removed without loss of data.
Remember that pictures and sounds
may be protected (DRM, p. 20).
C ¢N
The list of the folders and files is
displayed. The first entry in My stuff
is always the RS MultiMediaCard
(p. 129).
Navigation
F/ I
My stuff options
Open folder and start
download or start file with
the related application.
(For standard functions see p. 22)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyStuff.fm
left page (128) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
My stuff
Directory structure
Separate folders have already been
created for different data types in
My stuff. These folders cannot be
changed.
Folder
Description
Format
MultiMedia- Access to the
Card
card
Pictures
Pictures
bmp
bmx
jpg/jpeg
png
gif
Videos
Videos
3gp
Animations Start up/shut
down animations
bmx
gif
Sounds
Melodies, music
mp3
m3u
aac(+)
mid
amr
wav
Topics
sdt
Loaded theme
(zipped)
Theme configura- stc
tion (unzipped)
Color skins Colour skins for scs
the user interface
Games
Java archive
Download info
jar
jad
Applications
Applications
Other
Text modules
Voice recordings
tmo
vmo
129
Depending on the service provider, the
structure, content and range of functions
in My stuff may vary.
RS MultiMediaCard
The RS MultiMediaCard gives your
phone a very large memory capacity.
This allows you to save picture/video
files, and sound recordings, for
example. However, you can also
use this memory card like a floppy
disk to save any other files you may
wish to save.
C ¢N ¢C
The list of the folders and files is
displayed. The first entry is always
My stuff.
The folders and files on the memory
card are managed in the same way
as in My stuff. If the memory card assigns a file to a function in the phone
such as a ringtone, this is copied to
My stuff.
Additional information
RS MultiMediaCard is a trademark of the
MultiMediaCard Association.
Changing the RS MultiMediaCard (p. 17)
New RS MultiMediaCard™
1. Create a backup copy on a PC of the
data on the old memory card.
2. Format the new memory card.
3. Copy the data from the PC onto the new
memory card.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MyStuff.fm
right page (129) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
130
Mobile Phone Manager
Mobile Phone Manager
The Windows® PC program, Mobile
Phone Manager, enables you to use
extended phone functions from your
PC. For example, you can update your
Addressbook in the phone, read, save
and send SMS and MMS messages,
or synchronise your phone with
Outlook® or Lotus Notes™. The
phone and PC communicate via a
data cable (see p. 139).
SMS and MMS management
(messages)
You can download the software
from the Internet:
Backup and restore
Write MMS and SMS messages from
the convenience of your PC. Use all
the options your PC offers you and
use your sounds and pictures to create MMS and EMS messages. You
can read, forward, print, delete and
archive your messages.
www.siemens.com/m75
Contacts management
You can use contacts management
to manage the personal contacts you
have stored in your phone, to add
new ones and to delete and edit
them. You can compare and copy
contacts between your phone,
Outlook®, Lotus Notes™ and other
Siemens phones (including Gigaset).
With the back-up function, you can
regularly make a back-up copy of
your telephone data on the PC. If you
ever lose the data on your phone or
replace the phone, you can quickly
re-instate all data with the restore
function. Please observe any possible restrictions for DRM-protected
data (p. 20).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneManager.fm
left page (130) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Mobile Phone Manager
131
Bookmark management
(browser & bookmarks)
Processing pictures and photos
(images)
Use your PC to browse through the
Internet and define your preferred
sites. Save the Internet addresses as
bookmarks on your phone so that
you can quickly call them up at a later time when you are on the move.
Picture/photo processing offers the
user the opportunity to conveniently
create, edit and manage pictures
and photos. Filters and effects are
offered to help create colourful, attractive graphics. The user-friendly
interface makes child’s play of transferring pictures/photos from or to
the mobile phone, and of changing
the graphic settings.
Phone explorer
Ringtone management (sound)
You can use the phone explorer to
read your phone’s file system. Files
such as pictures, sounds and much
more can easily be copied between
the phone and PC by dragging and
dropping.
GPRS modem
The GPRS modem establishes an Internet connection via your mobile
phone so that you can surf the Internet on your laptop while on the
move and at the touch of a button.
The sound module allows the user to
manage nearly all sound formats
easily and to save them on the
phone.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_PhoneManager.fm
right page (131) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
132
Questions & Answers
Questions & Answers
If you have any questions on the use of your phone, you can contact us at
www.siemens.com/mobilephonescustomercare around the clock. As further help we
have listed below some frequently asked questions and answers.
Problem
Possible causes
Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Flat battery.
Press On/Off key for at least 2 seconds.
Standby time is too
short.
Charging error
(charge icon not
displayed).
SIM error.
Battery contacts dirty.
See also below under
“Charging error”.
Frequent use of organiser and
games.
Fast search activated.
Display illumination switched on.
Unintentional keystrokes (illumination!).
Battery totally discharged.
Charge battery. Check charging indicator in the
display.
Clean contacts.
Restrict use if applicable.
Deactivate speed search (p. 103).
Switch off display illumination (p. 86).
Activate key lock (p. 100).
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
Make sure the ambient temperature is right, wait
+5 °C to +40 °C.
for a while, then recharge.
Contact problem
Check power supply and connection to the
phone. Check battery contacts and telephone
connection socket, clean them if necessary, then
insert battery again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Only use original Siemens accessories.
Battery faulty.
Replace battery.
SIM card not inserted correctly. Check that the SIM card is inserted correctly
(p. 16).
Dirty SIM card contacts.
Clean SIM card with a dry cloth.
SIM card with wrong voltage.
Use 1.8 or 3 V SIM cards only.
SIM card damaged
Carry out a visual check. Have service provider
(e.g. broken).
change the SIM card.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FAQ.fm
left page (132) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Questions & Answers
Problem
Possible causes
No network
connection.
Weak signal.
Outside GSM range.
Invalid SIM card.
New network not authorised.
133
Possible solution
Move higher, to a window or an open space.
Check service provider's coverage area.
Complain to the service provider.
Try manual selection or select a different
network (p. 102).
Network call barring is set.
Check network barrings (p. 101).
Network overloaded.
Try again later.
Phone loses network. Signal too weak.
Reconnection to another service provider is
automatic (p. 102). Switching phone off and on
again can speed this up.
Calls not possible.
Second line set.
Set first line \ (p. 103).
New SIM card inserted.
Check for new barrings.
Charge limit reached.
Reset limit with PIN2 (p. 46).
Credit used up.
Load credit.
Call restrictions are in place.
Barrings can be set by service provider. Check
Some calls not
possible.
barrings (p. 101).
Impossible to make
Phonebook/Addressbook is full. Delete entries in the Addressbook/Phonebook
entries in Phonebook/
(see standard functions, p. 22).
Addressbook.
Voice message not
Call divert to mailbox not set.
Set call divert to mailbox (p. 68).
functioning.
Delete SMS messages (see standard functions,
ã flashes to indicate SMS memory full.
an SMS.
p. 22) or archive them (p. 53).
Delete MMS messages (see standard functions,
ä flashes to indicate MMS memory full.
an MMS.
p. 22).
å flashes to indicate Phone memory full.
Delete messages, pictures, videos, games or
an MMS.
applications.
Function cannot be
Not supported by service provid- Contact your service provider.
set.
er or registration required.
Capacity problems
Phone memory full.
Delete files in the relevant areas. You can use
with, for example,
the memory assistant to delete specific files
Games & More, ring(p. 91).
tones, pictures, videos, SMS archive.
No Internet access;
Profile not activated, profile set- Activate or set browser profile (p. 78). If necesdownloading not
tings wrong/incomplete.
sary ask your service provider.
possible.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FAQ.fm
right page (133) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
134
Questions & Answers
Problem
Possible causes
Possible solution
Text message cannot Service provider does not supbe sent.
port this service.
Phone number for service centre not set or incorrectly set.
SIM card contract does not support this service.
Service centre overloaded.
Recipient does not have a compatible phone.
EMS pictures are not Destination phone does not supdisplayed on the desti- port the EMS standard.
nation phone.
No Internet access
Incorrect browser profile set, or
possible.
wrong or incomplete settings.
PIN error/
Three wrong entries.
PIN2 error.
Contact your service provider.
Set service centre (p. 55).
Contact your service provider.
Repeat message.
Check.
Check browser settings (p. 78), or contact your
service provider.
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If you
have lost the PUK (MASTER PIN), contact your
service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (p. 135).
Service provider code No authorisation for this service. Contact your service provider.
error.
Too few/too many
Functions may have been add- Check with your service provider.
menu entries.
ed or deleted by the service provider via the SIM card.
No fax possible.
Wrong settings in the PC.
Check settings (p. 98).
No authorisation for this service. Contact your service provider.
Charge meter does
Charge pulse is not being trans- Contact your service provider.
not work.
mitted.
Damage
Severe shock.
Phone became wet.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
connector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the phone!
Reset all settings to factory default, p. 92:
*#9999#A
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_FAQ.fm
left page (134) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
right page (135) of M75 SIRIUS FUG en, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Hotline.fm
135
Customer Care
We offer fast, individual advice! You have
several options:
Our online support on the Internet:
www.siemens.com/
mobilephonescustomercare
We can be reached any time, any place.
You are given 24 hour support on all aspects of our products. Here you will find an
interactive fault-finding system, a compilation of the most frequently asked questions and answers, plus user guides and
current software updates to download.
When calling customer service, please
have ready your receipt and the phone
identity number (IMEI, to display press
#06#), the software version (to display,
press #06#, then §More§) and if available,
your Siemens Service customer number.
You will also find the most frequently
asked questions and answers in the section entitled "Questions & Answers" in this
user guide on (p. 132).
Qualified Siemens employees are waiting to
offer you expert information about our
products and installation.
In some countries repair and replace services are impossible where the products are
not sold through our authorised dealers.
If repair work is necessary, please contact
one of our service centres:
Abu Dhabi .........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brunei ................................................. 02 43 08 01
Bulgaria............................................... 02 73 94 88
Cambodia ........................................... 12 80 05 00
Canada ........................................1 88 87 77 02 11
Chile..................................................8 00 53 06 62
China ...........................................0 21 23 01 71 88
Colombia....................................01 80 07 00 66 24
Croatia ..............................................0 16 10 53 81
Czech Republic.................................2 33 03 27 27
Denmark ............................................. 35 25 86 00
Dubai ................................................0 43 96 64 33
Ecuador ..........................................18 00 10 10 00
Egypt.................................................0 23 33 41 11
Estonia.................................................. 6 30 47 97
Finland ............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany ......................................0 90 01 00 77 00
Greece ............................................80 11 11 11 16
Hong Kong .......................................... 28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland .................................................. 5 11 30 00
India .............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast.......................................... 05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.................................................... 2 72 37 17
Kuwait ................................................... 2 45 41 78
Latvia .................................................... 7 50 11 18
Lebanon.............................................. 01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 70 07 07 00
Luxembourg........................................ 43 84 33 99
Macedonia .......................................... 02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta .......................................+ 35 32 14 94 06 32
Mauritius ............................................... 2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco .............................................. 22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway................................................ 22 70 84 00
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Customer Care
left page (136) of M75 SIRIUS FUG en, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
Customer Care
Oman ....................................................... 79 10 12
Pakistan ..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Peru ..................................................0 80 05 24 00
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 09 99 66
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia ............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand ............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 64 59 98 98
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Venezuela....................................0 80 01 00 56 66
Vietnam...........................................84 89 20 24 64
Zimbabwe ............................................04 36 94 24
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Hotline.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
136
Care and maintenance
137
Care and maintenance
Your phone has been designed and
crafted with great care and attention
and should also be treated with care.
The suggestions below will help you
to enjoy your phone for many years.
• Protect your phone from moisture
and humidity! Precipitation, humidity and liquids contain minerals that will corrode electronic
circuits. Should your phone nonetheless become wet, disconnect it
immediately from any power supply and/or remove the battery,
and leave the open phone to dry
at room temperature!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store your phone in hot areas. High temperatures can shorten the life of electronic devices,
damage batteries and warp or
melt certain plastics.
• Do not store your phone in cold areas. When the phone warms up
again (to its normal ambient temperature), moisture can form inside the phone, which may
damage electronic components.
• Do not drop, knock or shake
your phone. Rough handling can
damage components inside the
device!
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the phone!
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary, repair the device.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Maintenance.fm
right page (137) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
138
Product data
Product data
Declaration of conformity
Siemens Information and Communication mobile hereby declares that
the phone described in this user
guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The
declaration of conformity (DoC) concerned has been signed. Please call
the company hotline if you require a
copy of the original or visit:
www.siemens.com/mobiledocs
Technical data
GSM class:
4 (2 watt)
Frequency range: 880 – 960 MHz
GSM class:
1 (1 watt)
Frequency range: 1,710 – 1,880 MHz
GSM class:
1 (1 watt)
Frequency range: 1,850 – 1,990 MHz
Weight:
110 g
Size:
110.5 × 51.5 × 21 mm
(104 ccm)
Phone ID
You will need the following information if
you lose your phone or SIM card:
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone
(under the battery):
..............................................................
the customer service number of the service
provider:
..............................................................
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to prevent misuse.
Operating times
The operating time depends upon
the respective conditions of use.
Extreme temperatures considerably
reduce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Talktime: up to 300 minutes
Standby time: up to 250 hours
Action taken Time Reduction of stand(min) by time by
Calling
30 – 90 minutes
Li-Ion battery:
750 mAh
Light *
40 minutes
Operating temp.:
–10 °C to +55 °C
(+14°F to +131°F)
5 – 10 minutes
SIM card:
1.8 or 3.0 V
Network
search
* Key input, games, organiser etc.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Data.fm
left page (138) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Accessories
139
Accessories
Fashion & Carry
Headset Purestyle HHS-610
Carrying Cases
A range of carry cases is available at specialist shops or you can visit the Siemens
Mobile Store online at:
High quality headset with removable earpiece and PTT (Push-To-Talk) key.
Siemens Original Accessories
www.siemens.com/shop
Energy
Li-Ion Battery (750 mAh) EBA-660
Spare battery.
Travel Charger
Travel Charger EU ETC-500t
Travel Charger UK ETC-510
Travel charger with an extended input
voltage range of 100–240 V.
Car Charger Plus ECC-600
Charger for the cigarette lighter socket in
the car. It is possible to make phone calls
during charging.
Handsfree portable
Headset Basic HHS-500
Simple headset without PTT (Push-To-Talk)
key
Headset HHS-510
Headset with PTT (Push-To-Talk) key to
accept and end calls.
Headset Stereo HHS-700
Stereo headset with PTT (Push-To-Talk) key
for listening to music and making calls.
Headset Bluetooth®
HHB-600 with EU power supply unit
HHB-610 with UK power supply unit
HHB-620 with Australian power supply unit
Elegant, small, easy to wear Bluetooth
headset.
Office
Data Cable DCA-500
For connecting the phone to the serial
RS232 port of the PC.
Data Cable USB DCA-510
For connecting the phone to the USB port of
the PC. With charging function
Data Cable USB DCA-540
For connecting the phone to the USB port of
the PC.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Accessory.fm
right page (139) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
140
Accessories
Multitainment
Flash IFL-600
Plug-in flash module for taking photos in
areas with low ambient light.
Car Kit Portable HKP-500
With the Car Kit Portable hands-free communication is easily transferred from one
vehicle to the next. Simply plug into the cigarette lighter, connect and speak.
Mobile Music Set IMS-700
The portable Mobile Music Set allows to listen to the music of the mobile phone in excellent sound quality everywhere and share
it with others via active loudspeakers.
Car Kit Bluetooth® Portable HKW-700
Bluetooth high-tech handsfree kit without
cable connection to the mobile phone. Plugs
into cigarette lighter socket – no installation
effort.
Bike-o-Meter IBS-700
The innovative Bike-o-Meter with additional
water protection cap for non-outdoor phones
and included altimeter combines a robust
and handy cradle for the mobile phone with a
powerful bike computer.
Car Kit Bluetooth® HKW-600
Innovative Bluetooth handsfree kit with an
external display for making in-car calls safely
and conveniently.
Car Solutions
Mobile Holder Antenna HMH-710
The cradle for connecting an external antenna. Ideal for use with headset or car kit
portable.
Can also be used as cradle for retrofitting
your handsfree car kit (series 55).
Car Kit Comfort Basic HKC-710
Handsfree kit with first-class digital call quality and supreme ease of use. The phone
specific Mobile Holder Antenna is necessary
in addition
Car Kit Easy HKP-700
Facilitates convenient handsfree talking with
high call quality. With the integrated, rotating
cradle and the flexible microphone positioning, the telephone can be optimally adjusted
to suit any vehicle interior. The power is supplied via the cigarette lighter socket.
Optional car kit accessories
Car Data Adapter HKO-690
Phone-In Adapter Cable HKO-570
Products can be obtained in specialist shops
or you can visit the Siemens Mobile Store
online:
Siemens Original Accessories
www.siemens.com/shop
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_Accessory.fm
left page (140) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
right page (141) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_SAR.fm
141
SAR (M75)
RF EXPOSURE/SPECIFIC ABSORPTION
RATE (SAR) INFORMATION
THIS SIEMENS M75 PHONE MEETS
THE GOVERNMENT'S
REQUIREMENTS FOR EXPOSURE TO
ELECTROMAGNETIC FIELDS.
Your cell phone is a radio transmitter
and receiver. It is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy established by the
Federal Communications Commission (FCC) of the U.S. Government
and by Health Canada. These limits
are part of comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines were developed
and confirmed by independent scientific organizations through periodic and thorough evaluation of scientific studies*. The limits include a
substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for cell
phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit established by the FCC and by Health
Canada is 1.6 W/kg**. Tests for SAR
are conducted using standard operating positions accepted by the FCC
and by Industry Canada with the
phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified
power level, the actual SAR level of
the phone while operating can be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a wireless base station, the lower the power output.
Before a phone model is available for
sale to the public, it must be tested
and the manufacturer must certify to
the FCC and Industry Canada that it
does not exceed the limit established by each government for safe
exposure. The tests are performed in
positions and locations (e.g., at the
ear and worn on the body), reported
to the FCC and available for review
by Industry Canada. The highest SAR
value for this Siemens M75 when
tested for use at the ear is
0.80 W/kg***
and when worn on the body is
0.70 W/kg***
Additional information on Specific
Absorption Rates (SAR) can be found
on the Cellular Telecommunications
Internet Association (CTIA) web-site
at www.phonefacts.net or the Canadian Wireless Telecommunications
Association (CWTA) website
www.cwta.ca
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
SAR (M75)
left page (142) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
SAR (M75)
SAR information on this Siemens
M75 phone is on file with the FCC
and can be found under the Display
Grant section of
www.fcc.gov/oet/fccid
after searching on FCC ID PWX-M75.
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the
governmental requirements for safe
RF exposure.
This cell phone has been tested for body
worn operation and meets FCC RF
exposure guidelines when used with a
Siemens accessory designated for this
product, where available, or when used
with a carry accessory that contains no
metal and that positions the handset at
least 1.5 cm/0.69 in in is the correct testing distance from the body. Use of other
carry accessories may not ensure compliance with FCC RF exposure guidelines.
* The World Health Organization (WHO,
CH-1211 Geneva 27, Switzerland), on
the basis of the current knowledge, does
not see any necessity for special precautionary measures when using cell
phones.
Further information:
www.who.int/peh-emf,
www.mmfai.org,
www.siemens.com/mobilephones
** averaged over 1 g of tissue.
*** SAR values may vary depending on national requirements and network bands.
SAR information for different regions can
be found at
www.siemens.com/mobilephones
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_SAR.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
142
right page (143) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\Quality.fm
143
Quality
Battery quality
declaration
Display quality
declaration
The capacity of your mobile phone
battery will reduce each time it is
charged/discharged. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As
a result the operating time of your
mobile phone may be considerably
reduced, even after a full recharge of
the battery.
For technological reasons, some
small dots in other colours may appear in the display in rare cases.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six months,
if the battery is clearly suffering from
loss of performance, we recommend
that you replace it. Please buy only
Siemens original batteries.
Please remember that if some dots
appear brighter or darker in the display, this generally does not mean
that a fault has occurred.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Quality
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
144
U.S. FDA
U.S. FDA
The U.S. Food and Drug
Administration's (FDA) Center
for Devices and Radiological
Health Consumer Update on
Mobile Phones
FDA has been receiving inquiries
about the safety of mobile phones,
including cellular phones and PCS
phones. The following summarizes
what is know – and what remains
unknown – about whether these
products can pose a hazard to
health, and what can be done to
minimize any potential risk. This information may be used to respond
to questions.
Why the concern?
Mobile phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave
range while being used. They also
emit very low levels of radio frequency energy (RF), considered non-significant, when in the stand-by mode.
It is well known that high levels of RF
can produce biological damage
through heating effects (this is how
your microwave oven is able to cook
food). However, it is not known
whether, to what extent, or through
what mechanism, lower levels of RF
might cause adverse health effects
as well. Although some research has
been done to address these questions, no clear picture of the biological effects of this type of radiation
has emerged to date. Thus, the available science does not allow us to
conclude that mobile phones are absolutely safe, or that they are unsafe.
However, the available scientific evidence does not demonstrate adverse health effects associated with
the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about
hand-held mobile phones, the kind
that have a built-in antenna that is
positioned close to the user's head
during normal telephone conversation. These types of mobile phones
are of concern because of the short
distance between the phone's antenna – the primary source of the RF
– and the person's head. The exposure to RF from mobile phones in
which the antenna is located at
greater distances from the user (on
the outside of a car, for example) is
drastically lower than that from
hand-held phones, because a person's RF exposure decreases rapidly
with distance from the source. The
safety of so-called “cordless phones,”
which have a base unit connected to
the telephone wiring in a house and
which operate at far lower power
levels and frequencies, has not been
questioned.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
left page (144) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
U.S. FDA
How much evidence is there that handheld mobile phones might be harmful?
Briefly, there is not enough evidence
to know for sure, either way; however, research efforts are on-going.
The existing scientific evidence is
conflicting and many of the studies
that have been done to date have
suffered from flaws in their research
methods. Animal experiments investigating the effects of RF exposures
characteristic of mobile phones have
yielded conflicting results. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in
laboratory animals. In one study,
mice genetically altered to be predisposed to developing one type of cancer developed more than twice as
many such cancers when they were
exposed to RF energy compared to
controls. There is much uncertainty
among scientists about whether results obtained from animal studies
apply to the use of mobile phones.
First, it is uncertain how to apply the
results obtained in rats and mice to
humans. Second, many of the studies showed increased tumor development used animals that had already been treated with cancercausing chemicals, and other studies
exposed the animals to the RF virtually continuously – up to 22 hours
per day.
For the past five years in the United
States, the mobile phone industry
has supported research into the safe-
145
ty of mobile phones. This research
has resulted in two findings in particular that merit additional study:
1. In a hospital-based, case-control
study, researchers looked for an association between mobile phone use
and either glioma (a type of brain
cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No
statistically significant association
was found between mobile phone
use and acoustic neuroma. There
was also no association between
mobile phone use and gliomas when
all types of gliomas were considered
together. It should be noted that the
average length of mobile phone exposure in this study was less than
three years.
When 20 types of glioma were considered separately, however, an association was found between mobile
phone use and one rare type of glioma, neuroepithelliomatous tumors.
It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with
how often the mobile phone was
used, or the length of the calls. In
fact, the risk actually decreased with
cumulative hours of mobile phone
use. Most cancer causing agents increase risk with increased exposure.
An ongoing study of brain cancers by
the National Cancer Institute is expected to bear on the accuracy and
repeatability of these results.1
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
right page (145) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
146
U.S. FDA
2. Researchers conducted a large
battery of laboratory tests to assess
the effects of exposure to mobile
phone RF on genetic material. These
included tests for several kinds of abnormalities, including mutations,
chromosomal aberrations, DNA
strand breaks, and structural changes in the genetic material of blood
cells called lymphocytes. None of
the tests showed any effect of the RF
except for the micronucleus assay,
which detects structural effects on
the genetic material. The cells in this
assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the
test cells to radiation for this long resulted in heating. Since this assay is
known to be sensitive to heating,
heat alone could have caused the
abnormalities to occur. The data already in the literature on the response of the micronucleus assay to
RF are conflicting. Thus follow-up
research is necessary. 2
FDA is currently working with government, industry, and academic
groups to ensure the proper followup to these industry-funded research
findings. Collaboration with the Cellular Telecommunications Industry
Association (CTIA) in particular is expected to lead to FDA providing research recommendations and scientific oversight of new CTIA-funded
research based on such recommendations.
Two other studies of interest have
been reported recently in the literature:
• Two groups of 18 people were exposed to simulated mobile phone
signals under laboratory conditions while they performed cognitive function tests. There were no
changes in the subjects' ability to
recall words, numbers, or pictures, or in their spatial memory,
but they were able to make choices more quickly in one visual test
when they were exposed to simulated mobile phone signals. This
was the only change noted among
more than 20 variables compared.3
• In a study of 209 brain tumor cases and 425 matched controls,
there was no increased risk of
brain tumors associated with mobile phone use. When tumors did
exist in certain locations, however, they were more likely to be on
the side of the head where the
mobile phone was used. Because
this occurred in only a small number of cases, the increased likelihood was too small to be
statistically significant.4
In summary, we do not have enough
information at this point to assure
the public that there are, or are not,
any low incident health problems associated with use of mobile phones.
FDA continues to work with all parties, including other federal agencies
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
left page (146) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
U.S. FDA
and industry, to assure that research
is undertaken to provide the necessary answers to the outstanding
questions about the safety of mobile
phones.
What is known about cases of human
cancer that have been reported in users
of hand-held mobile phones?
Some people who have used mobile
phones have been diagnosed with
brain cancer. But it is important to
understand that this type of cancer
also occurs among people who have
not used mobile phones. In fact,
brain cancer occurs in the U.S. population at a rate of about 6 new cases
per 100,000 people each year. At
that rate, assuming 80 million users
of mobile phones (a number increasing at a rate of about 1 million per
month), about 4800 cases of brain
cancer would be expected each year
among those 80 million people,
whether or not they used their
phones. Thus it is not possible to tell
whether any individual's cancer
arose because of the phone, or
whether it would have happened
anyway. A key question is whether
the risk of getting a particular form
of cancer is greater among people
who use mobile phones than among
the rest of the population. One way
to answer that question is to compare the usage of mobile phones
among people with brain cancer
with the use of mobile phones
among appropriately matched people without brain cancer. This is
147
called a case-control study. The current case-control study of brain cancers by the National Cancer Institute,
as well as the follow-up research to
be sponsored by industry, will begin
to generate this type of information.
What is FDA's role concerning the safety
of mobile phones?
Under the law, FDA does not review
the safety of radiation emitting consumer products such as mobile
phones before marketing, as it does
with new drugs or medical devices.
However, the agency has authority
to take action if mobile phones are
shown to emit radiation at a level
that is hazardous to the user. In such
a case, FDA could require the manufacturers of mobile phones to notify
users of the health hazard and to repair, replace or recall the phones so
that the hazard no longer exists.
Although the existing scientific data
do not justify FDA regulatory actions
at this time, FDA has urged the mobile phone industry to take a number
of steps to assure public safety. The
agency has recommended that the
industry:
• Support needed research into possible biological effects of RF of the
type emitted by mobile phones;
• Design mobile phones in a way
that minimizes any RF exposure to
the user that is not necessary for
device function; and
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
right page (147) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
148
U.S. FDA
• Cooperate in providing mobile
phone users with the best possible
information on what is known
about possible effects of mobile
phone use on human health.
At the same time, FDA belongs to an
interagency working group of the
federal agencies that have responsibility for different aspects of mobile
phone safety to ensure a coordinated effort at the federal level. These
agencies are:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Health and Safety
Administration
• National Telecommunications and
Information Administration
The National Institutes of Health also
participates in this group.
In the absence of conclusive information
about any possible risk, what can concerned individuals do?
If there is a risk from these products
– and at this point we do not know
that there is – it is probably very
small. But if people are concerned
about avoiding even potential risks,
there are simple steps they can take
to do so. For example, time is a key
factor in how much exposure a person receives. Those persons who
spend long periods of time on their
hand-held mobile phones could consider holding lengthy conversations
on conventional phones and reserving the hand-held models for shorter
conversations or for situations when
other types of phones are not available.
People who must conduct extended
conversations in their cars every day
could switch to a type of mobile
phone that places more distance between their bodies and the source of
the RF, since the exposure level
drops off dramatically with distance.
For example, they could switch to:
• a mobile phone in which the antenna is located outside the vehicle,
• a hand-held phone with a built-in
antenna connected to a different
antenna mounted on the outside
of the car or built into a separate
package, or
• a headset with a remote antenna
to a mobile phone carried at the
waist.
Where can I find additional information?
For additional information, see the
following websites:
• Federal Communications Commission (FCC) RF Safety Program
(select “Information on Human Exposure to RF Fields from Cellular
and PCS Radio Transmitters”):
http://www.fcc.gov/oet/rfsafety
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
left page (148) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
U.S. FDA
• World Health Organization (WHO)
International Commission on
Non-Ionizing Radiation Protection
(select Qs & As):
http://www.who.int/emf
• United Kingdom, National Radiological Protection Board:
http://www.nrpb.org.uk
• Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
• U.S. Food and Drug Administration (FDA) Center for devices and
Radiological Health:
http://www.fda.gov/cdhr/
consumer/
1 Muscat et al. Epidemiological Study of
Cellular Telephone Use and Malignant Brain
Tumors. In: State of the Science Symposium; 1999 June 20; Long Beach, California.
2 Tice et al. Tests of mobile phone signals for
activity in genotoxicity and other laboratory
assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999,
Washington, DC; and personal communication, unpublished results.
3 Preece, AW, Iwi, G, Davies-Smith, A,
Wesnes, K, Butler, S, Lim, E, and Varey, A.
Effect of a 915- MHz simulated mobile
phone signal on cognitive function in man.
Int. J. Radiat. Biol., April 8, 1999.
4 Hardell, L, Nasman, A, Pahlson, A,
Hallquist, A and Mild, KH. Use of cellular
telephones and the risk for brain tumors;
a case-control study. Int. J. Oncol, 15:
113–116, 1999.
149
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
right page (149) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
150
FCC/Industry Canada Notice
FCC/Industry
Canada Notice
Your phone may cause TV or radio interference (for example, when using
a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to
stop using your telephone if such
interference cannot be eliminated.
If you require assistance, please contact your local service facility.
This device complies with part 15 of
the FCC rules. Operation is subject to
the condition that this device does
not cause harmful interference.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_FDA.FM
left page (150) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Ten Driving Safety Tips
151
When available, use a hands-free device.
Ten Driving Safety
Tips
Your Siemens wireless phone gives
you the power to communicate by
voice – almost anywhere, anytime.
But an important responsibility accompanies the benefits of wireless
phones, one that every user must
uphold.
When driving a car, driving is your
first responsibility. When using your
wireless phone behind the wheel of
a car, practice good common sense
and remember the following tips:
Get to know your phone and its features
such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of
valuable features most phones offer
including, automatic redial and
memory dial – most phones can
store up to 99 numbers in memory
dial. Also, work to memorize the
phone keypad so you can use the
speed dial function without taking
your attention off the road.
A number of hands-free wireless
phone accessories are readily available today. Whether you choose an
installed mounted device for your
phone or a speaker phone accessory,
take advantage of these devices if
they are available to you.
Position your phone within easy reach.
Make sure you place your wireless
phone within easy reach and where
you can grab it without removing
your eyes from the road. If you get
an incoming call at an inconvenient
time, let your voicemail answer it for
you.
Suspend conversations during hazardous driving conditions or situations.
Let the person you are speaking to
know you are driving; if necessary,
suspend the call in heavy traffic or
hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay
attention to the road.
Do not take notes or look up phone
numbers while driving.
If you are reading an address book or
business card while driving a car, or
writing a “to do” list, then you are not
watching where you are going. It’s
common sense. Don’t get caught in
a dangerous situation because you
are reading or writing and not paying attention to the road or nearby
vehicles.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_Driving_Tips.fm
right page (151) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
152
Ten Driving Safety Tips
Dial sensibly and assess the traffic.
If possible, place calls when you are
not moving or before pulling into
traffic. Try to plan your calls before
you begin your trip, or attempt to coincide your calls with times you may
be stopped at a stop sign, red light or
otherwise stationary. But if you need
to dial while driving, follow this simple tip – dial only a few numbers,
check the road and your mirrors,
then continue.
Do not engage in stressful or emotional
conversations that may be distracting.
Stressful or emotional conversations
and driving do not mix – they are distracting and even dangerous when
you are behind the wheel. Make people you are talking with aware you
are driving and if necessary, suspend
phone conversations that have the
potential to divert your attention
from the road.
Use your phone to call for help.
Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous situations – with your phone
at your side, help is only three numbers away. Dial 9-1-1 in the case of
fire, traffic accident, road hazard, or
medical emergency. Remember, it is
a free call on your wireless phone.
Use your phone to help others in
emergencies.
Your wireless phone provides you a
perfect opportunity to be a “good
Samaritan” in your community. If
you see an auto accident, crime in
progress or other serious emergencies where lives are in danger, call
9-1-1, as you would want others to
do for you.
Call roadside assistance or a special
wireless non-emergency assistance
number when necessary.
Certain situations you encounter
while driving may require attention,
but are not urgent enough to merit a
call to 9-1-1. But you can still use
your wireless phone to lend a hand.
If you see a broken-down vehicle
posing no serious hazard, a broken
traffic signal, a minor traffic accident
where no one appears injured, or a
vehicle you know to be stolen, call
roadside assistance or other special
non-emergency wireless numbers.
“The wireless industry reminds you to
use your phone safely when driving.”
For more information, please call
1 (888) 901-SAFE, or visit our Web site
at: www.wow-com.com
Provided by the Cellular Telecommunications Industry Association (CTIA)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\am_Driving_Tips.fm
left page (152) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
right page (153) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:01)
153
Intellectual Property
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-
Intellectual Property Restrictions
All Intellectual Property, as defined
below, which is owned by or otherwise the property of Siemens Information and Communications Mobile, LLC (“Siemens”), its affiliates,
partners or suppliers, relating to the
Phone, including but not limited to
accessories, parts or software relating thereto (the “Phone System”), is
proprietary under federal laws, state
laws and International treaty provisions. Intellectual Property includes,
but is not limited to, inventions (patentable or unpatentable), patents,
trade secrets, copyrights, software,
computer programs, and related
documentation and other works of
authorship. You may not infringe or
otherwise violate the rights secured
by the Intellectual Property. Moreover, you agree that you will not
(and will not attempt to) disassemble, decompile, reverse engineer,
prepare derivative works from, modify or make any other effort to create
source code from the software. No
title to ownership in the Intellectual
Property is transferred to you
through purchase or possession of
the Phone or its components. All applicable rights of the Intellectual
Property shall remain with Siemens,
its affiliates, partners or suppliers.
Siemens will have no liability with respect to any claim of patent infringe-
ment which is based upon the combination of the Product or parts
furnished hereunder with software,
apparatus or devices not furnished
by Siemens, nor will Siemens have
any liability for the use of ancillary
equipment or software not furnished by Siemens which is attached
to or used in connection with the
Product, The foregoing states the entire liability of Siemens with respect
to infringement of patents by the
Product or any parts thereof.
Laws in the United States and other
countries preserve for Siemens certain exclusive rights for copyrighted
Siemens software, such as the exclusive rights to reproduce and distribute copies of such Siemens software.
Siemens software may be used only
in the Product in which the software
was originally embodied when purchased, and such software in such
Product may not be replaced, copied, distributed. modified in any
way, or used to produce any derivative thereof. No other use including,
without limitation, alteration, modification, reproduction, distribution.
or reverse engineering of such
Siemens software or exercise of
rights in such Siemens software is
permitted. No license is granted by
implication, estoppel or otherwise
under Siemens patent rights or copyrights.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Intellectual Property
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
154
End user license agreement
End user license agreement
This Software License Agreement
("Agreement") is between You and
Siemens Information and Communication Mobile, LLC and/or one of its
affiliates ("Licensor"). The Agreement authorizes You to use the Software specified in Clause 1 below,
which may be included on Your
phone, stored on a CD-ROM, sent to
You by electronic mail, downloaded
from Licensor's Web pages or servers
or from other sources under the
terms and conditions set forth below. This is an agreement on end user rights and not an agreement for
sale. Licensor continues to own the
copy of the Software and any other
copy that You are authorized to
make pursuant to this Agreement.
Read this Agreement carefully before installing, downloading or using
the Software. Further, by installing,
downloading and/or using the Software, You agree to the terms and
conditions of this Agreement.
1. Software.
As used in this Agreement, the term
"Software" means, collectively:
(i) all the software in Your phone,
all of the contents of the disk(s),
CD-ROM(s), electronic mail and its
file attachments, or other media
with which this Agreement is provided;
(ii) related Licensor or third party
software; (iii) digital images, stock
photographs, clip art or other artistic
works ("Stock Files");
(iv) related explanatory written
materials ("Documentation");
(v) fonts;
(vi) upgrades, modified versions,
updates, additions and copies of the
Software, if any, licensed to You by
Licensor (collectively "Updates") and
(vii) any other possible documentation related thereto.
2. End user rights and use.
Licensor grants to You a non-exclusive, non-transferable end user right
to install the Software or use the
Software installed on the phone. The
Software is licensed with the phone
as a single integrated product and
may be used with the phone only as
set forth in these licensing terms.
3. Limitations on end user rights.
(a) You may not copy, distribute, or
make derivative works of the Software.
(b) You may not use, modify, translate, reproduce or transfer the right
to use the Software or copy the Software except as expressly provided in
this Agreement.
(c) You may not resell, sublicense,
rent, lease or lend the Software; except You may permanently transfer
all of Your rights as set forth in the
Agreement only as part of a perma-
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fm
left page (154) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
End user license agreement
nent sale or transfer of the phone,
provided the recipient agrees to the
terms of this Agreement.
(d) You may not reverse engineer,
reverse compile, disassemble or otherwise attempt to discover the
source code of the Software (except
to the extent that this restriction is
expressly prohibited by law) or create derivative works based on the
Software.
(e) You shall not display, modify,
reproduce or distribute any of the
Stock Files included with the
Software.
(f) You shall not display, modify, reproduce or distribute any of the preloaded content included with the
software unless permitted as stated
in the User Guide or in the prompts
in the Software. In the event that
You are allowed to display, modify,
reproduce or distribute certain parts
of the pre-loaded content, You shall
review the "Readme" files associated
with the pre-loaded content (contained on the CD) to ascertain what
rights You have with respect to such
materials. Pre-loaded content may
not be used in the production of libelous, defamatory, fraudulent, infringing, lewd, obscene or pornographic material or in any otherwise
illegal manner. You agree that You
shall only use the pre-loaded content
in a manner that complies with all
applicable laws, including, but not
limited to, applicable restrictions
155
concerning copyright and other intellectual property rights. You may
not register or claim any rights in the
pre-loaded content or derivative
works thereof.
(g) You agree that You shall only use
the Software in a manner that complies with all applicable laws in the
jurisdiction in which You use the
Software, including, but not limited
to, applicable restrictions concerning copyright and other intellectual
property rights.
4. Copyright.
Licensor and/or its software suppliers and their respective affiliates
own the Software and all rights, including without limitation including
proprietary rights therein, are protected by international treaty provisions and other applicable national
laws of the country in which it is being used. The structure, organization
and code of the Software are the
valuable trade secrets and confidential information.
5. Multiple copies/updates.
If the Software supports multiple
platforms or languages, if You receive the Software on multiple media, of if You otherwise receive multiple copies of the Software, the
number of phones on which all versions of the Software are installed
shall be one phone. If the Software is
an Update to a previous version of
the Software, You must possess a
valid end user right to such previous
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fm
right page (155) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
156
End user license agreement
version in order to use the Update
and You may use the previous version for ninety (90) days after You
receive the Update in order to assist
You in the transition to the Update.
After such time You no longer have a
right to use the previous version, except for the sole purpose of enabling
You to install the Update.
6. Commencement & termination.
This Agreement is effective from the
first date You use or install the Software. Your end user rights automatically and immediately terminate
without notice from Licensor if You
fail to comply with any provision of
this Agreement. In such event, You
must immediately delete, destroy or
return at Your own cost and expense, and without entitlement to
any refund of the purchase price, the
phone and the Software, and all related material to Licensor.
7. Except as expressly provided in the
limited warranty for the phone, you
acknowledge the Software is provided "as is" without warranty of any
kind express or implied. To the maximum extent permitted by applicable
law neither Licensor, Licensor's Software suppliers or their respective affiliates, nor the copyright holders
make any representations or warranties, express or implied, including
but not limited to the warranties of
merchantability or fitness for a particular purpose or that the Software
will not infringe any third party pat-
ents, copyrights, trademarks or other rights. There is no warranty by Licensor or by any other party that the
functions contained in the Software
will meet your requirements or that
the operation of the Software will be
uninterrupted or error free.
8. Not fault tolerant.
The Software may contain technoloy
that is not fault tolerant and is not
designed, manufactured, or intended for use in environments or applications in which the failure of the licensed Software could lead direclty
to death, personal injury, or severe
physical or environmental damage
or financial loss.
9. Limitation of liability.
To the maximum extent permitted
by applicable law, in no event shall
Licensor or Licensor's Software suppliers or their respecitve affiliates
and employees be liable for any lost
profits, revenue, sales, data or costs
of procurement of substitute goods
or services, property damage, personal injury, interruption of business, loss of business information or
for any special, direct, indirect, incidental, economic, cover, punitive,
special or consequential damages,
however caused and whether arising
under contract, tort, negligence, or
other theory of liability arising out of
the use of or inability to use the Software, even if Licensor or its Software
suppliers are advised of the possibility of such damages. Because some
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fm
left page (156) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
End user license agreement
countries/states/jurisdictions do not
allow the exclusion or limitation of liability, but may allow liability to be
limited, in such cases, the liability of
Licensor, its Software suppliers and
their respective affiliates and employees shall be limited to, at Licensor's option, either (a) return of the
price paid less a reasonable amount
for usage, or (b) repair or replacment
of the Software that does not meet
the limited warranty provided with
the phone and which is returned in
accordance with the requirements of
the limited warranty.
Nothing contained in this Agreement shall prejudice the statutory
rights of any party dealing as a consumer. Nothing contained in this
Agreement limits Licensor's liability
to You in the event of death or personal injury resulting from Licensor's
negligence if law prohibits such a
limitation. Licensor is acting on behalf of its software suppliers and
their respective employees and affiliates for the purpose of disclaiming,
excluding and/or restricting obligations, warranties and liability as provided in this clause 9, but in no other
respects and for no other purpose.
10. Technical support.
Licensor has no obligation to furnish
You with technical support except as
agreed in writing between You and
Licensor in the Limited Warranty provided with the phone.
157
11. Export control.
The Software may be subject to export regulations of the United States
and other countries. You agree that
You shall comply with all applicable
export laws, restrictions and regulations of the United States or foreign
agencies or authorities, and shall not
export, or transfer for the purpose of
re-export, any Software, product or
technical data received under this
Agreement or any Software or product produced by use of such technical data, including processes and
services, in violation of any applicable restrictions, laws or regulations,
or without all necessary approvals.
12. Applicable law & general provisions.
This Agreement shall be governed by
and construed in accordance with
the laws of the State of California
without regard to its conflicts of laws
rules. This is the entire agreement
between Licensor and You relating
to the Software and it supersedes
any prior representations, discussions, undertakings, end user agreements, communications or advertising relating to the Software.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_EndUserLic.fm
right page (157) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
158
Menu tree
Menu tree
Default book
> Show entries
New entry
Business card
Groups
Default book

Call records
> Missed calls
Calls received
Calls dialed
Delete records
Time/charges
> Last call
All incom.calls
All outg. calls
Remain. units
Charge setting
> Charge/Unit
Charge limit
Surf & fun
> URL/service provider
Auto display
Games
Applications
Download wiz.
Bookmarks
Internet
Camera
Messages
> Create new
> SMS
MMS
E-mail
Chat room
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fm
left page (158) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Menu tree
Messages
> Inbox
159
> SMS
MMS
E-mail
WAP push
Retrieve email
Send/receive
CB messages
Draft
> SMS
MMS
E-mail
Unsent
> SMS
MMS
E-mail
Send e-mail
Send/receive
Sent
> SMS
MMS
MMS templates
E-mail
SMS archive
Text modules
Msg settings
> Zoom in
SMS setup
> SMS profiles
SMS signature
MMS settings
> Connection profile:
User settings
Help
E-mail setup
> Accounts
General sett.
Help
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fm
right page (159) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
160
Menu tree
Messages
> Msg settings
> WAP push set.
> Security sett.
Help
Voice message
CB services
Organizer
> Calendar
> Receive CB
Topic list
Appointments
CB languages
Tasks
Notes
Missed appts.
Dictat.machine
Time zones
Calend. setup
Extras
> SIM services
Music Player
PoC
Alarm clock
Sound recorder
Calc.
Unit converter
Stopwatch
Countdown
Remote sync.
My stuff
Settings
Device manag.
> Profiles
Topics
Display setup
> Language
Text input
Wallpaper
Logo
Color scheme
Screensaver
Start up anim.
> T9 preferred
Input language
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fm
left page (160) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Menu tree
Settings
> Display setup
> Shutdn anim.
Greeting
Large letters
Illumination
Contrast
Ring tones
> Ringer setting
Silent alert
Volume
> Calls
PoC
Messages
CB services
Alarm clock
d Calls
Organizer
Group calls
System
Other calls
Applications
PoC
More melodies
> Messages
Alarm clock
Organizer
Startup melody
Shutdown mel.
Call setup
> Hide ID
Sound recorder
Call waiting
Divert
> All calls
Call screening
Unanswered
Any key
Not reachable
Minute beep
No reply
Busy
Receiving fax
Receiving data
Status check
Clear all
161
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fm
right page (161) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
162
Settings
Menu tree
> Phone setup
> Key tones
Info tones
Auto off
Phone identity
Memory assis.
File system
Fact. settings
> Format
Clean up
Format card
Clock
> Time/date
Eject card
Time zones
Date format
Time format
Buddhist date
Show clock
Auto time
Connectivity
> GPRS
GPRS info
IrDA
Bluetooth
> Search
Search all
Known devices
Last connect.
Black list
My BT name
Data services
Visib.to others
HTTP profile
Help
Authentication
Fax/data
> Send voice/fax
Rec voice/fax
Security
> Auto key lock
Direct call
Only ‚
Rcve fax/data
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fm
left page (162) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Menu tree
Settings
> Security
> PIN code
This SIM only
163
> PIN control
Change PIN
Change PIN2
Chg.phonecode
Barring
> All outgoing
Outgoing intl.
Out.int.x home
All incoming
When roaming
Status check
Clear all
Network
> Line
Network info
> Select line
Protected
Choose netwrk
Auto network
Preferred net
Band selection
Fast search
User group
> Active
Select group
All outgoing
Pref. group
Accessories
> Car Kit
> Auto answer
Automatic switch off
Car loudspk.
Headset
> Auto answer
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIR_MenuTree.fm
right page (163) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
left page (164) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Index
Index
Accessories ....................................... 139
Addressbook
Dial entry........................................ 40
Groups ........................................... 41
New entry ...................................... 38
Read entry ...................................... 40
Aircraft mode...................................... 83
Alarm
Alarm clock................................... 120
Type ............................................. 110
Alarm clock....................................... 120
All calls (diversion).............................. 90
All incoming (barrings) ..................... 101
Answering service (external) ............... 68
Any key to answer .............................. 90
Appointments................................... 109
Authentication.................................... 99
Auto display
Clock .............................................. 93
Duration/charges ............................ 46
Auto key lock .................................... 100
Auto time zone ........................... 93, 113
Auto. network dialling....................... 102
Auto. redial......................................... 31
Automobile accessories..................... 140
Band selection .................................. 103
Battery
Charge ........................................... 18
Insert.............................................. 16
Operating times...................... 18, 138
Quality Declaration ....................... 143
Big letters ........................................... 86
Bluetooth ........................................... 95
Bookmarks (WAP) ......................... 77, 79
Browser .............................................. 78
Buddh. year ........................................ 93
Business card ...................................... 37
Busy number ...................................... 31
Calculator......................................... 122
Calendar .......................................... 108
Call
Accept/end..................................... 32
Barring......................................... 101
Charges ......................................... 46
Conference .................................... 33
Divert............................................. 89
End ................................................ 30
Hold............................................... 32
Menu ............................................. 34
Reject............................................. 32
Swap between calls (change) ......... 32
Call back............................................. 31
Call divert........................................... 89
Call screening..................................... 90
Call transfer........................................ 34
Call waiting ...................................33, 89
Calling................................................ 30
Calls dialled (call record) ..................... 45
Calls received (call record) .................. 45
Camera .............................................. 47
Car Kit
Accessories .................................. 140
Setting ......................................... 104
Car kit accessories ............................ 140
Care of phone .................................. 137
Cell Broadcast (CB) ............................. 76
Charges.............................................. 46
Charges/units ..................................... 46
Charging the battery .......................... 18
Clock.................................................. 93
Colour skin ......................................... 85
Conference ........................................ 33
Connection profiles ............................ 97
Connectivity ....................................... 94
Contact list ......................................... 70
Control code (DTMF) .......................... 35
Converter ......................................... 123
Countdown ...................................... 124
Credit limit ......................................... 46
CSD settings ....................................... 97
Currency converter ........................... 123
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
164
right page (165) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fm
Date format ........................................ 93
Default book....................................... 37
Device manag................................... 126
Dialling code....................................... 30
Dialling with number keys................... 30
Dictating machine............................. 112
Digital Rights Management ................. 20
Direct reply (SMS) ............................... 55
Display
Illumination.................................... 86
Language ....................................... 85
Symbols ......................................... 14
Wallpaper image............................. 85
Divert ................................................. 89
Download........................................... 80
Driving safety ................................... 151
DTMF tones (tone sequences) ............. 35
Duration/charges ................................ 46
E-mail
Lists................................................ 66
Settings.......................................... 67
Write .............................................. 65
Emergency number ............................ 19
End user license agreement .............. 154
Extras ............................................... 114
Fast access........................................ 106
Fast network search .......................... 103
Fax/data mode .................................... 98
Flash .................................................. 48
Formatting (phone memory)............... 92
Formatting (SMS text)......................... 51
Forwarding (call) ................................ 34
Frequency range............................... 103
Games and applications ...................... 80
GPRS................................................... 94
Groups ............................................... 41
Handset volume.................................. 30
Handsfree talking................................ 32
Headset
Accessories................................... 139
Setting ......................................... 104
Hide ID ............................................... 89
Highlighting mode.............................. 23
165
Hold call ........................................32, 34
Home network ................................. 102
Hotline ............................................. 135
HTTP profile........................................ 98
Identity number (IMEI) ....................... 91
IMEI number ...................................... 91
Inbox ................................................. 50
Info tones........................................... 91
Information services (CB).................... 76
Infrared (IrDA) .................................... 94
Input language (T9)............................ 27
Inst. Message ..................................... 69
International dialling code .................. 31
Internet.............................................. 77
Joystick .............................................. 12
Key tones ........................................... 91
Language ........................................... 85
Legal notices ........................................ 3
Limit (duration/charges) ..................... 46
Logo .................................................. 85
Loss of phone, SIM card .................... 138
Mailbox .............................................. 68
Maintenance of phone ..................... 137
Master reset ....................................... 92
Media player .................................... 127
Memory assistant ............................... 91
Menu
Controls ......................................... 21
My menu ..................................... 105
Speed dialling ................................ 23
Menu speed dialling ........................... 23
Menu tree ........................................ 158
Message
CB.................................................. 76
E-mail ............................................ 65
MMS .............................................. 57
SMS ..........................................51, 53
Message memory full ......................... 56
Message type ..................................... 55
Microphone on/off.........................34, 49
Minute beep....................................... 90
Missed appointments ....................... 111
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Index
left page (166) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
Index
Missed calls (call record) ..................... 45
MMS
Lists................................................ 62
Receive........................................... 61
Send............................................... 60
Write .............................................. 57
Mobile Phone Manager ..................... 130
MultiMediaCard ................................ 129
Muting (microphone).................... 34, 49
My items ............................................ 36
My menu .......................................... 105
My stuff ............................................ 128
Network
Barring ......................................... 101
Connection................................... 102
Settings........................................ 102
Notes................................................ 111
One number only................................ 34
Only ‚ ........................................... 100
Operating times (battery)............ 18, 138
Organiser.......................................... 108
Own (phone) numbers........................ 44
Own greeting ..................................... 86
Phone code......................................... 24
Phone data ....................................... 138
Phone identity number (IMEI) ............. 91
Phone number memo ......................... 31
Phone number transmission on/off...... 89
Phone setup ....................................... 91
Phonebook
Call an entry ................................... 43
New entry ...................................... 42
Protected SIM ................................. 44
Special books.................................. 44
VIP numbers ................................... 44
Photo ................................................. 47
Pictures & sounds (SMS)...................... 52
PIN
Change........................................... 24
Control ........................................... 24
Enter .............................................. 19
Error............................................. 134
PIN2 ................................................... 24
PoC................................................... 115
Preferred network............................. 102
Preventing accidental activation.......... 25
Product data..................................... 138
Profiles
MMS .............................................. 63
Phone ............................................ 82
SMS ............................................... 55
WAP............................................... 79
Prompt ............................................... 31
Provider logo...................................... 85
PUK, PUK2 .......................................... 24
Questions & Answers........................ 132
Records .............................................. 45
Redial................................................. 30
Reminder ........................................... 31
Remote synchronisation ................... 125
Ringtone setting ................................. 87
Ringtones......................................41, 87
Safety precautions................................ 5
Screensaver........................................ 85
Second phone number ..................... 102
Security.............................................. 24
Security codes .................................... 24
Service centre (SMS)........................... 55
Service provider portal........................ 36
Service tones...................................... 91
Set time/date...................................... 93
Settings.............................................. 82
Short message (SMS).......................... 51
Shown in the display .......................... 14
Shut down animation ......................... 86
Siemens City Portal............................. 36
Signal strength ................................... 20
Silent alert.......................................... 87
SIM card
Clear barring .................................. 25
Insert ............................................. 16
Problems...................................... 132
SIM services (optional) ..............114, 119
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
166
right page (167) of M75 SIRIUS FUG am, A31008-H7430-A40-1-4A19 (01.06.2005, 08:09)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\M75_SIRIUS_1\Output\M75_1_FUG_FCC_us-en_050531_te_correction\SIRSIX.fm
SMS
Archive........................................... 54
Lists................................................ 54
Profiles ........................................... 55
Read............................................... 53
Settings.......................................... 55
Signature ....................................... 55
T9 input ......................................... 27
To group ........................................ 52
Write .............................................. 51
Software version................................. 91
SOS ................................................ 9, 19
Sound recorder ................................. 121
Special books...................................... 44
Special characters ............................... 26
Speech time (battery) ....................... 138
Speed dialling keys ........................... 107
Standard functions.............................. 22
Standby mode .................................... 20
Standby time .............................. 18, 138
Start up animation .............................. 86
Stopwatch ........................................ 124
Storage location (Phonebook) ............. 42
Surf & fun ........................................... 77
Swap .................................................. 32
Switch off phone
Automatic ...................................... 91
Manually ........................................ 19
Switch on phone................................. 19
Symbols.............................................. 14
Synchronisation ................................ 125
T9 text input ....................................... 27
Tasks ................................................ 110
Technical data .................................. 138
Text entry
With T9 .......................................... 27
Without T9 ..................................... 26
Text module ....................................... 29
Themes .............................................. 84
This SIM only .................................... 100
Time zones ........................... 19, 93, 113
167
Unanswered ....................................... 89
Upper and lowercase letters (T9) ........ 26
User group ....................................... 103
Validity (SMS)..................................... 55
Video mode........................................ 48
Video playback ................................. 127
Voice message (mailbox) .................... 68
Volume
Handset volume ............................. 30
Profiles........................................... 82
Ringtone ........................................ 87
Wallpaper (display)............................. 85
WAP push........................................... 50
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Index

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Modify Date                     : 2005:06:01 08:21:33Z
Create Date                     : 2005:06:01 08:01:02Z
Page Count                      : 167
Creation Date                   : 2005:06:01 08:01:02Z
Mod Date                        : 2005:06:01 08:21:33Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Thomas Euchner
Metadata Date                   : 2005:06:01 08:21:33Z
Creator                         : Thomas Euchner
Title                           : SIR.book
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools