Benq H10 Module User Manual H10 Manual 20070813

Download:
Mirror Download [FCC.gov]
Document ID	833354
Application ID	lbKfx9r283l1F3zPJW+zkA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.86kB (635725 bits)
Date Submitted	2007-08-24 00:00:00
Date Available	2007-08-24 00:00:00
Creation Date	2007-08-14 16:40:21
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-08-14 16:40:21
Document Title	Microsoft Word - H10 Manual 20070813.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Nicole.lin

Datasheet
H10 (Data-Only)
HSDPA PCI Express mini card module
Datasheet
Rev. 0.2 (Preliminary)
2007/06/22
COPYRIGHT BENQ Corporation
This document contains proprietary technical information which is the property of BenQ Corporation
and is issued in strict confidential and shall not be disclosed to others parties in whole or in parts
without written permission of BenQ Corporation
The documents contain information on a product, which is under development and is issued for
customer evaluation purposes only.
BENQ may make changes to product specifications at any time, without notice.
BenQ Corporation
Mobile Communications BG
18 JiHu Road, Nei-Hu, Taipei 114, Taiwan, R.O.C.
Tel: +886-2-2799-8800
Fax: +886-2-2656-6390
http://www.BenQ.com
HISTORY
Version
Date
Notes
VER: 0.1
2007-APR-24
FIRST RELEASE
VER: 0.2
2007-JUN-22
Update characteristic of RF
1. INTRODUCTION..................................................................................................... 4
1.1 Description.........................................................................................................4
1.2 Application Device..............................................................................................4
2. FEATURES ............................................................................................................... 5
2.1 General Characteristics .......................................................................................5
2.2 RF Functionalities...............................................................................................6
Maximum TX Power ........................................................................................6
Parametric Performance ...................................................................................6
Sensitivity .........................................................................................................7
Radio Frequency...............................................................................................7
3. HARDWARE DESCRIPTION..................................................................................... 9
3.1 System Interface..................................................................................................9
3.2 Functional Diagram.......................................................................................... 10
3.3 Pin Description................................................................................................. 11
3.4 Terminal Definition .......................................................................................... 13
3.5 Electrical Characteristics ................................................................................... 15
DC characteristics........................................................................................... 15
Digital interface .............................................................................................. 16
USB Transceiver DC characteristics................................................................. 16
USIM Interface ............................................................................................... 17
3.6 Environmental.................................................................................................. 17
3.7 Physical Package ............................................................................................... 18
4. SOFTWARE CHARACTERISTICS ............................................................................ 21
4.1 Introduction ..................................................................................................... 21
4.2 Software Architecture........................................................................................ 21
5.1 Compliance with FCC Rules and Regulations
1. INTRODUCTION
1.1 Descrip便ion
Overview
This document describes all the functions, features, and interfaces of the HSDPA
PCI Express Mini Card Module -- H10 from BenQ. BenQ H10
HSDPA
module supports
Tri-band
WCDMA/HSDPA
and
Quad-band
GSM/GPRS/EDGE network connection capability.
BenQ H10 HSDPA card can provides high speed data connection, and the
data speed of downlink path is up to 7.2Mbps. Furthermore, users can
ease to use this module by using the “Qsyncher” application software that we
provide for Windows XP and Vista system.
With the BENQ H10 HSDPA module, devices are enhanced in both functionality
and usability based on state of the art wireless technology.
1.2 Applica便ion Device
Scope
BenQ H10 module is a high speed modem card with PCI Express minicard form
factor and is focusing on the Notebook, UMPC, MID and other
portable device marketing.
汗
No便ebook
汗
Ul便ra Mobile PC
汗
Mobile In便erne便 Device
汗
Wireless Rou便er
汗
USB Modem
汗
Car Embedded Sys便em
2. FEATURES
2.1 General Charac便eris便ics
Band
BAND:
GSM850/EGSM900/DCS1800/PCS1900/WCDMA850/WCDMA1900/WCDMA2100
TX
RX
GSM850
824~849 MHz
869~894MHz
EGSM900
880~915 MHz
925~960MHz
DCS1800
1710~1785MHz
1805~1880MHz
PCS1900
1850~1910MHz
1930~1990MHz
WCDMA850
824~849 MHz
869~894MHz
WCDMA1900
1850~1910MHz
1930~1990MHz
WCDMA2100
1920~1980MHz
2110~2170MHz
Support SIM Interface: 1.8V/3V
Form factor
i. Dimension: 50.95 x 30 x 5.0 mm
ii. Weight: 12g
Power
Operation Voltage: 3.3V +/- 9%
Power Consumption:
Speech Mode:
Band
Typ
Max
Unit
GSM850 / PCL=5
385
400
mA
EGSM900 / PCL=5
395
410
mA
DCS / PCL=0
312
325
mA
PCS / PCL=0
280
295
mA
WCDMA (all band)
720
820
mA
Standby Mode:
Typ (Average)
Max (Average)
Unit
GSM / Page frame=2
3.5
4.5
mA
GSM / Page frame=9
2.0
mA
DCS / Page frame=2
3.5
4.5
mA
DCS / Page frame=9
2.0
mA
PCS / Page frame=2
3.5
4.5
mA
PCS / Page frame=9
2.0
mA
WCDMA / DRX=6 (0.64 S)
3.6
4.5
mA
WCDMA / DRX=9 (5.12 S)
1.5
mA
Hardware Interface:
52 Pins PCI Express Mini Card connector interface
2 RF Antenna Coaxial Connectors
Software Interface:
USB driver
Qsyncher software tool.
2.2 RF Func便ionali便ies
Maximum TX Power
The performance of the transmitter meets test requirement ETSI TS 151 010-1 chapter
13.3 for GSM, chapter 13.17.3 for EDGE and TS 34.121 chapter 5.2&5.4.3 for WCDMA,
chapter 5.2A for HSDPA
Band
Max
Min
GSM8S0
33 dBm ±2dBm
S dBm ±SdBm
EGSM
33 dBm ±2dBm
S dBm ±SdBm
DCS
30 dBm ±2dBm
0 dBm ±SdBm
PCS
30 dBm ±2dBm
0 dBm ±SdBm
GSM8S0(EDGE)
27 dBm ±3dBm
S dBm ±SdBm
EGSM(EDGE)
27 dBm ±3dBm
S dBm ±SdBm
DCS(EDGE)
26 dBm ±3dBm
2 dBm ±SdBm
PCS(EDGE)
26 dBm ±3dBm
2 dBm ±SdBm
UMTS-2100
24 dBm +1/-3dBm
Less than -S0dBm
UMTS-1900
24 dBm +1/-3dBm
Less than -S0dBm
UMTS-8S0
24 dBm +1/-3dBm
Less than -S0dBm
1/1S βo/βd 12/1S (HS-DPCCH)
24 dBm +1/-3dBm
13/1S βo/βd 1S/8 (HS-DPCCH)
23 dBm +2/-3dBm
1S/7 βo/βd 1S/0 (HS-DPCCH)
22 dBm +3/-3dBm
Parame便ric Performance
Tests carried out at -20ºC, 25ºC and 60ºC for each voltage 3V, 3.3V and
3.6V. The Measured Peak Phase, RMS Phase, frequency error, power level,
and static sensitivity meets ETSI TS 151 010-1 chapter 13.1 for GSM and TS 34.121
chapter 5.13.1 for WCDMA, chapter 5.13.1A for HSDPA
Band (GSM)
Peak Phase Error
RMS Phase Error
GSM8S0
<20°
 1 GHz)
EGSM (900 MHz)
Frequency Range
TX 880-91S MHz; RX 92S-960 MHz
Channel Spacing
200 KHz
Number of Channels
124 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
4S MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
33 dBm Class 8 (2 W peak) – S dBm
Output Impedance
S0 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
DCS (1800 MHz)
Frequency Range
TX 1710-178S MHz; RX 180S-1880 MHz
Channel Spacing
200 KHz
Number of Channels
374 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
9S MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
30 dBm – 0 dBm
Output Impedance
S0 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
Compatible with phase 2 feature
PCS (1900 MHz)
Frequency Range
TX: 18S0~1910MHz; RX: 1930~1990MHz
Channel Spacing
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
80 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
30 dBm – 0 dBm
Output Impedance
S0 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
Compatible with phase 2 feature
WCDMA_IMT (2100 MHz)
Frequency Range
TX: 1920~1980MHz; RX: 2110~2170MHz
Channel Raster
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
QPSK
Duplex Spacing
190 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
24 dBm +1/-3dBm - less than -S0dBm
Output Impedance
S0 Ohm
Spurious Emission
-67dBm(92S-93SMHz);-79dBm(93S-960MHz);-71dBm(180S-1880MHz)
;-60dBm(184S-1880MHz);-41dBm(188S-1920MHz)
WCDMA_PCS (1900 MHz)
Frequency Range
TX: 18S0~1910MHz; RX: 1930~1990MHz
Channel Raster
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
QPSK
Duplex Spacing
80 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
24 dBm +1/-3dBm - less than -S0dBm
Output Impedance
S0 Ohm
Spurious Emission
WCDMA_850 (850 MHz)
Frequency Range
TX 824-849 MHz; RX 869-894 MHz
Channel Raster
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
QPSK
Duplex Spacing
4S MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
24 dBm +1/-3dBm - less than -S0dBm
Output Impedance
S0 Ohm
Spurious Emission
-60dBm(869-894MHz;1930-1990MHz;2110-21SSMHz)
3. HARDWARE DESCRIPTION
3.1 Sys便em In便erface
The I/O connectors of H10 module are PCI EXPRESS MINI CARD and two RF antenna
connectors. Table 3-1 summarizes the 25 signals and 18 power lines that are supported by
the PCI Express Mini Card System Interface. Table 3-2 shows the antenna interface.
Signal Group
Pin no.
Table 3-1 System Interface
Description
Power
3.3V power source
GND
13
Return current path
USB
USB serial data interface compliant to the USB 2.0 specification
PERST#
Function reset to the card
W_DISABLE#
Shutdown the HSDPA module
UIM
SIM function
LED
Status indicators
Signal Group
ANT
Table 3-2 Antenna interface
Connector no.
Description
Antenna interface
3.2 Func便ional Diagram
3.3 Pin Descrip便ion
Pin
Signal name
Direction
Description
NC
No connect
+3.3Vaux
NC
GND
NC
No connect
NC
No connect
NC
No connect
UIM_PWR
Output
Power source for the USIM
GND
Power
Return current path
10
UIM_DATA
11
NC
12
UIM_CLK
13
NC
14
UIM_RESET
Output
USIM reset signal
15
GND
Power
Return current path
16
NC
No connect
17
NC
No connect
18
GND
19
NC
Power
3.3V power source
No connect
Power
Return current path
Input / Output
USIM data signal
No connect
Output
USIM clock signal
No connect
Power
Return current path
No connect
Active low signal.
20
W_DISABLE#
Input
This signal is used by the system to
shutdown the HSDPA module.
21
GND
Power
Return current path
22
PERST#
Input
23
NC
24
+3.3Vaux
25
NC
26
GND
Power
Return current path
27
GND
Power
Return current path
28
NC
29
GND
30
NC
No connect
31
NC
No connect
Active low signal.
Function reset to the card.
No connect
Power
3.3V power source
No connect
No connect
Power
Return current path
32
NC
No connect
33
NC
No connect
34
GND
Power
Return current path
35
GND
Power
Return current path
36
USB_D-
37
GND
38
USB_D+
Input / Output
39
+3.3Vaux
Power
3.3V power source
40
GND
Power
Return current path
41
+3.3Vaux
Power
3.3V power source
42
LED_WWAN#
Output
43
GND
Power
44
LED_WLAN#
Output
45
NC
46
LED_WPAN#
47
NC
No connect
48
NC
No connect
49
NC
No connect
50
GND
51
NC
52
+3.3Vaux
Input / Output
Power
USB serial data interface (negative)
Return current path
USB serial data interface (postive)
Active low signal.
WAN status LED driver.
Return current path
Active low signal.
LAN status LED driver.
No connect
Active low signal.
Output
PAN status LED driver.
Power
Return current path
No connect
Power
3.3V power source
3.4 Terminal Defini便ion
Recommend an便enna connec便
Hirose Coaxial Connectors
Sys便em connec便or
52 pins PCI Express Mini Card
3.5 Elec便rical Charac便eris便ics
DC charac便eris便ics
Pin
Function/ Name
NC
+3.3Vaux
NC
GND
NC
NC
NC
UIM_PWR
Direction
Parameter
Power
Power Supply Voltage
Power
Ground
Output
Supply Voltage
Min Typ
GND
Power
10
UIM_DATA
Input / Output
11
NC
12
UIM_CLK
13
NC
14
UIM_RESET
Output
1S
GND
Power
Ground
16
NC
17
NC
18
GND
Power
Ground
19
NC
20
W_DISABLE#
Unit
3.0
3.3
3.6
1.S
2.8S
3.0S
Current
Max
1S0
mA
Ground
Output
Logic High Input Voltage
1.69
2.6
2.9
Logic Low Input Voltage
-0.3
0.91
Logic High Input Voltage
1.69
2.6
2.9
Logic Low Input Voltage
-0.3
0.91
Power
Power Supply Voltage
3.0
3.3
3.6
Input
21
GND
Power
22
PERST#
Input
Ground
23
NC
24
+3.3Vaux
2S
NC
26
GND
Power
Ground
27
GND
Power
Ground
28
NC
29
GND
Power
Ground
30
NC
31
NC
32
NC
33
NC
34
GND
Power
Ground
3S
GND
Power
Ground
36
USB_D-
Input / Output
Termination Voltage
37
GND
Power
Ground
38
USB_D+
Input / Output
39
+3.3Vaux
40
3.0
3.3
3.6
Termination Voltage
3.0
3.3
3.6
Power
Power Supply Voltage
3.0
3.3
3.6
GND
Power
Ground
41
+3.3Vaux
Power
Power Supply Voltage
3.0
3.3
3.6
42
LED_WWAN#
Output
Driver current
1S0
mA
43
GND
Power
Ground
44
LED_WLAN#
Output
Driver current
1S0
mA
4S
NC
46
LED_WPAN#
Output
Driver current
300
mA
47
NC
48
NC
49
NC
S0
GND
Power
Ground
S1
NC
S2
+3.3Vaux
Power
Power Supply Voltage
3.6
3.0
3.3
Digi便al in便erface
Parameter
Min
Typ
Max
Unit
Logic High Input Voltage
1.69
2.6
2.9
Logic Low Input Voltage
-0.3
0.91
Logic High Output Voltage
2.1S
2.6
2.6
Logic Low Output Voltage
-0.3
0.4S
USB Transceiver DC charac便eris便ics
The USB interface is powered from 3.3V power source.
Parameter
Comments
Min
Input sensitivity (differential)
|D+ D-|, VIN=0.8 to 2.SV
Typ
Max
0.2
Unit
Output voltage
Logic LOW
RL=1.SKΩ
to 3.6V
Logic HIGH
RL=1.SKΩ
to GND, IO=1mA
Series output resistance
D+, D-
2.8
28
33
0.3
3.6
44
Ω
Internal pull-up resistor
3.3V to D+, 3.3V to D-
1.42S
1.S
1.S7S
KΩ
Internal pull-down resistor
D+ to GND, D- to GND
14.3
1S
24.8
KΩ
USIM In便erface
The USIM signals are defined on system connector to provide the interface between the
removable User Identity Module. USIM interface usually run off either 1.8V or 3.0V.
Pin
Name
Direction
Description
UIM_PWR
Output
Power source for the USIM
10
UIM_DATA
Input / Output
USIM data signal
12
UIM_CLK
Output
USIM clock signal
14
UIM_RESET
Output
USIM reset signal
Parameter
Min
Typ
Max
Unit
Logic High Input Voltage
1.8S2S
2.8S
3.1S
Logic Low Input Voltage
-0.3
0.997S
Logic High Output Voltage
2.4
2.8S
2.8S
Logic Low Output Voltage
-0.3
0.4S
Schmitt Hysteresis
1S0
Logic input leakage current
-200
200
nA
30
KΩ
Internal pull-up resistor
Comments
Programmable range
3.6 Environmen便al
Operational temperature: -20 ~ +60
Functional temperature: -20 ~ +70
Storage temperature: -40 ~ +85
mV
3.7 Physical Package
Top View
Bo便便om View
Side View
4. SOFTWARE CHARACTERISTICS
4.1 In便roduc便ion
We provide the PC Tool – Qsyncher for H10 HSDPA card. The main functions in this
tool are Contacts (only SIM card), SMS, Settings, and QMI.
QMI is the independent network software; user can run this service alone without
Qsycher active.
4.2 Sof便ware Archi便ec便ure
5 Compliance with FCC Rules and Regulations
15.21
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit
to which the receiver is connected.
different
from that
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void your authority to
operate the equipment.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
FCC RF Radiation Exposure Statement:
1.
This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
OEMs who install this module into an enclosure where the module’s FCC ID label is not
visible from the outside of the enclosure must label the enclosure with these words:
‘Contains Transmitter Module FCC ID: JVPH10.’ Failure to follow these labeling instructions
makes the OEM subject to sanctions from the FCC.”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 23
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f8d18445-1177-427d-8240-5ff2a2f1ccd9
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2007:08:14 16:40:21+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:08:14 16:40:21+08:00
Document ID                     : uuid:51f5fe65-2862-48cd-9000-5d127ecf1e00
Format                          : application/pdf
Title                           : Microsoft Word - H10 Manual 20070813.doc
Creator                         : Nicole.lin
Author                          : Nicole.lin

EXIF Metadata provided by EXIF.tools