Benway Technology BW GPS TRACKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3544119
Application ID	om2bhA9AEOpEGj48zlHtLQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.73kB (146673 bits)
Date Submitted	2017-09-05 00:00:00
Date Available	2017-09-05 00:00:00
Creation Date	2017-07-27 19:19:35
Producing Software	pdfFactory Pro 5.01 (Windows 7 Ultimate x64 Chinese (Simplified))
Document Lastmod	2017-08-30 17:26:40
Document Title	ET300英文背面-Manual user of ET300.doc
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	LP

GPS Tracker
（GPS+SMS+GPRS+GSM）
User Manual
(Version 2.3)
1. Appearance Design
（PIC. 1）
2. Specification
● GSM 850/900/1800/1900 Quad band for global world
● GPRS: CLASS12,TCP/IP
● Voltage input range: 9–100V
● Sleeping Current：2.0mA@12V
● GPS positioning time：Cold start -38S (OPEN SKY）
Hot start -2S (OPEN SKY）
● GPS positioning precision：10m（2DRMS)
● Temperature ：-20℃ ~ +70℃
● Humidity：20% - 80% RH
● Dimension：67(L)mm*38.8(W)mm*11.5(H)mm
● Weight: 0.125kg
Please read this manual carefully before attempting installation and online activation. Pictures are for
indication and illustration purposes only.
3.Function
◇ GPS satellite & LBS base station dual model positioning
◇ Vibration alarm (sensitivity is adjustable from 1 to 5 grade)
◇ GEO-fence
◇ Max voltage 100V，Support battery voltage-detection
◇ Low current consumption sleep mode。
◇ ACC detection
◇ Remote control cut-off/on engine (petrol / electricity) ( need extra add relay)
◇ Cut off power alarm (built-in battery ,optional)
◇ Waterproof
4. Indicating Led Light
（PIC.2）
NOTE：For covert protective , the LED status will be invisible after installing the back cover.
(1).Red Led -Power status indicator
Led status
Meaning
Quick flashing
Working normally (working by backup car battery ).
Slow plashing
Working normally (working by battery of device)
the device will change to work by own battery
while backup battery had been cut down and it will
alarm .
Continuously in bright status
Device error
(2).Blue LED-GSM status indicator
LED Status
Meaning
Quick flashing
Working normally ,uploading GPRS data to
platform server
Slow flashing
Working normally ,receive GSM signal normally
Continuously in bright status
No GSM signal
(3).Green LED- GPS status indicator
LED Status
Quick flashing
Continuously in bright status
Meaning
Working normally , GPS Located
Searching GPS signal
5. Installation:
5.1 preparation before installation :
5.1.1 Open the packing box to check whether the type of device is correct and whether the accessories are
included ,or else please contact with your distributor.
5.1.2 To test SIM card, please install it into a normal GSM mobile and ensure it can send and receive SMS,
and enables for GPRS.
5.1.3 SIM installation, refer to below pictures.
Note：Power off before installing or removing the SIM card.
（PIC.3）
5.2 Notice of Installation:
To prevent theft of the Device, the device should be installed as covertly as possible.Notice as following:
5.2.1 Avoid placing the Device close to higher power electrical devices ,such as reversing radar,anti-theft
device or other vehicle communication equipment.
5.2.2 The Device should be fixed into position with cable ties or wide double-side tape.
5.2.3 Device has built-in GSM antenna and GPS antenna. During installation, please make sure the receiving
side face is up, with no metal object above the device to interfere with GPS reception.
5.2.4 For safety , do NOT remove the fuse of device cable.
5.3 Device wiring diagram
FOR Electric Bike
FOR Car
（PIC.4）
5.4
Steps of installation
5.4.1 Open the back cover ,insert a SIM card to SIM card slot .
5.4.2 Switch power button up(power on) .
5.4.3 Connect the power code with the interface of device. Now three LED lights will lighting .Make sure the
receiving side face up,without any metal object shelter. The LED lights will flashing after 1 to 5mins.
It shows working normally.
5.4.4 Close the back cover.
5.4.5 Please ask professional technical to connect wires and install to the vehicle. After correct installation,
the RED led will flashing, 1 min. Later the BLUE led will flashing too. That shows installing completely.
6. Cautions of device wiring:
6.1 Power code wiring:
The standard voltage is 9V-100V. Please use the power line which provided by the manufacturer. The red line
is the positive. The black line is the negative. The negative should earth alone or link iron during installing. Do
not connect it to other ground wire. And please make sure the device is powered on status. (Power button on
down position)
Red Led light will flashing while device installed correctly, GSM blue led light and GPS Green led light will
flashing around 1 minutes later after getting signal.
6.2 Usage of Device
Our GPS Tracker is used for motorcycle, electric-bike two wheels,electric-bike three wheels. As well
as for car ,truck etc four wheels vehicle.
7. Message commends:
User can set different kinds of function commands via sending message, including check position, cut
engine, etc., Below commands and punctuation marks must be putted under English status. All commands
will get auto replies according to the message sent.
Note device with initial password 6666
NO
Features
Commands
Add administrator
#6666#AAD#1#Cell
No 1
No#
Replies from device
Remarks
For example：
ADD admin account 1 ok!
#6666#AAD#1#15988888888#
Means administrator1 number is ：
Add administrator
#6666#AAD#2#Cell
No 2
No#
ADD admin account 2 ok!
#6666#DAD#1#
Delete admin account 1 OK!
15988888888，can add 2 administrator
Delete
Administrator No 1
For example： #6666#DAD#1#
Administrator No 2
Cut engine
#6666#DAD#2#
#6666#CF#
Restore engine
#6666#OF#
for delet the
administrator 2
Fuel cut has already been
For example：#6666#CF# ，only apply
completed,OK!
for administrator
has already
been completed,OK!
For example：#6666#OF# ，Start engine
only apply for administrator.
Setting time
;#6666#DAD#2#
Delete admin account 2 OK!
Open fuel
for
delet the administrator
Delete
total
#6666#SMT#30#
distance in moving
#6666#SMT#sendcon
Set
movement
status
ds#
time,OK!
upload
For example：
#6666#SMT#10#，Here the unit is
senconds 10 to 200s
Setting time
For example：#6666#SST#3#，Here the
distance in steady
unit is minutes
status
#6666#SST#minutes#
#6666#sst#3#ok!
For example：#6666#SLEEP#10#
this
mean setting sleep mode and every 10
minutes device will exit sleep mode and
Setting sleep mode
time
send
#6666#SLEEP#TIME#
data
to
server
time
rang:1-99999，0=disable sleep mode
For example：#6666#SSA#1#，Here
Active vibration
10
alarm
Levels, 1: most fexible 2: standard level
#6666#SSA#levels#
Set alarm level, OK!
Cancel vibration
11
alarm
3. lowest level .
For example：#6666#CSA#，cancel
#6666#CSA#
Close vibration Alarm, OK!
vibration alarm
1= allow sms alarm
12
SMS Alarm
#6666#SMSA#1#
alarm,
For example: #6666#SMSA#1#
1= allow call alarm
13
Call Alarm
#6666#CALLA#1#
0=Disable sms
0=Disable call
alarm
For example：#6666#RESET#，The
device will restart after 8~18 mins.
Device will not reply message to
14
Re-start device
#6666#Reset#
Start Reset System, OK!
administrator again .
For example：
#6666#sapn#CMNET##### if user
name and password are blank, Or
#6666#sapn#CMNET#AA#123456###
15
Set APN
#0613#sapn#apn name#user#password###
,# can not be missed
Simply Commands:In order to make the steps easy, below you can find our simply commands,
the function is same as per above detailed commands. Remarks: SMS must be text under English
status.
Features
Simple commands
Remarks:
Getting Location
Reply with google
of longitude and
links of longitude and
latitude
1234
latitude
DY
Engine engine
RELAY,1#
RELAY,0#
Anybody
Only
Cut off the engine
KY
Restore engine
Authority
administrator
Only
Restore the engine
administrator
CS
PARAM#
Checking IMEI,IP，
View information
STATUS#
Etc,
Anybody
Re-start
CQ
Re-start the device
Anybody
Vibration alarm specifications:
If you need vibration alarm, please follow below instructions:
1）Add admin number: please use your mobile phone to send a SMS to the device according to the 1st
command as above commands list(make sure to text the SMS under English status). After add your
number as administrator, device will reply you a SMS with OK or failed.
2） Setting vibrate alert level: text a SMS to active vibration alarm and send to the device(make sure to
text the SMS under English status), and set the vibration alert level, detailed please refer the 10th
command as above commands list.
3）After finished above 2 steps, vibration alarm had been actived. As long as the car stopped for more
than 1minute, if somebody gets in touch with the car and didnt turn on the ACC in 10seconds(ACC=0), the
device will send SMS and call the administrator. If the ACC was turned on in 10seconds, the device will
judge it as the car owner himself and will not alert the car owner. This is for not sending wrong vibration
alert, active and close the vibration alarm smartly.
Sleeping Mode with power saving Specifications:
The sleeping mode had been activated and defaulted inside the device in the factory：After the car has
switched off more than 5 minutes, the device will shut off all the led lights, turn off GPS module and goes to
sleeping mode to save the power of the vehicle’s battery. There are 2 methods to exit the sleeping mode:
1)，Switch on the ACC，at this time , the green ACC cable is high level up, this will lead device exit sleeping
mode.。If ACC is always on high level up,(means ACC is always on) the device will not goes to sleeping mode.
2)，Shake the device to make it exit from sleeping mode.
During the first time testing, it is better to connect the ACC wire to high level up to locate the GPS signal
fast in the opening area as well as to avoid the device goes to sleeping mode and could not locate the GPS
after 5 minutes. (note: please do not test in room as no GPS signal inside room). If client need to turn off the
sleeping mode, please send SMS to the device #6666#SLEEP#0# to close this function.
8. Logging on platform to track devices via Internet globally
Platform Web domain：
If you are registered user arleady, you can logging in platform directly, or please contact with your
distributor to open an account for you.
Please contact your distributor and get the platform user manual.
Please enter your user name and password to logging in.
9.Trouble shooting :
9.1 After installing it in the first time, if device can not get connected with platform server, at this time it is
“logged off” status in platform. Please check the installation of device:
1) Check whether the connection of power-line is correct, please do not connect it with the car control
line.
2) Check whether SIM card is installed correctly, please refer to the installation manual;
3) Check whether the power switch is toggled to “ON”, the switch is in the left of the SIM card’s slot.
4) Whether ACC ignition cable is connected, please turn on the ACC with key after it is connected.
5) Check the LEDs’ status. In normal working status, the red LED is in solid bright or flashing; green
LED and blue LED are both in solid bright.
6) Check whether GPS is located, if not, please drive to the open areas for positioning.
9.2 If it is “offline” status in platform:
First of all, check the three LED’s status. If it is not convenient to check that，please check the SIM card
status :
1) Call the SIM card number of the device to check whether you can get through;
2) Check whether the vehicle is in no GSM area, such as basement;
3) Check the GSM/GPS disconnection area, whether it is all disconnected or few of them disconnected,
to make sure whether it is the fault of operator’s internet.
4) Check whether your SIM card charge is overdue;
5) Check whether the SIM card supports GPRS;
6) Check the parameter setup, whether the device IMEI number, GPRS sending interval is correct;
9.3 If the device’ GPS function is normal, but can not locate for a long time, please check whether the
installation setup of device is correct:
1) Please make sure the GPS antenna face is up;
2) Please make sure there is no electromagnetic wave- absorbent object (metal) above the device,
especially the thermal-protective coating on the windshield, it may affect the GPS reception of the device;
9.4 If GPS can not receive the signals normally (there is high building around to interfere with GPS reception),
please drive to the open areas for positioning. Generally, it needs 1-2 minutes to receive the first coordinates.
9.5 If GSM can not receive the signals normally, please check whether SIM card is installed correctly or there
is no GSM signal at the location you are, such as basement parking, please drive to a place covered by GSM
signal reception.
9.6 When cellphone with special number receives tele- cutoff alarm sms, please make sure whether it is
illegal wire cutoff, or the FUSE on power line is blown. If the FUSE in it is blown, please contact your
distributor to exchange with the same model FUSE, after the internal trouble is shoot, it can be power on to
work again.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : LP
Title                           : ET300英文背面-Manual user of ET300.doc
Create Date                     : 2017:07:27 19:19:35+08:00
Creator Tool                    : pdfFactory Pro www.pdffactory.com
Modify Date                     : 2017:08:30 17:26:40+08:00
Metadata Date                   : 2017:08:30 17:26:40+08:00
Producer                        : pdfFactory Pro 5.01 (Windows 7 Ultimate x64 Chinese (Simplified))
Document ID                     : uuid:ac5af69c-80c4-404c-b257-a298a17dbe51
Instance ID                     : uuid:1e04412e-6bdf-4129-b375-f5a5963b007d
Page Layout                     : SinglePage
Page Count                      : 9
Author                          : LP

EXIF Metadata provided by EXIF.tools