Beyerdynamic AVENTHO Bluetooth Headset User Manual Layout 1

Beyerdynamic Bluetooth Headset Layout 1

User Manual

AVENTHOWIRELESS––HEADPHONES KOPFHÖRERManualMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 1
Aventho wireless – Headphones4Thank you for choosing Aventho wireless Bluetooth headphones. To ensure an optimumlistening experience, we would like to give you a brief instruction on how to use Aventhowireless. Safety instructionsCaution:When you connect the headphones, please make sure that the volume level isset to minimum. Adjust the volume level only after putting on the headphones. We would like to point out that excessively high volumes and long listening timesmay cause hearing damage. Hearing defects always constitute an irreversible impairment of hearing ability.Always ensure an adequate volume level. It is advisable to keep listening times as shortas possible at high volume levels. According to the Occupational Health and Safety Regulations of German trade associations BGV B3, noise pollution e.g. in the workplacemust not exceed 85 dB (room volume level) during a maximum permissible listeningtime of 8 hours. If the volume level is increased by 3 dB respectively, the permissiblelistening time is cut in half, i.e. at 88 dB, the listening time is 4 hours, at 91 dB 2 hours, etc.Danger to life!Headphones drastically reduce perception of external sounds. Using headphones in roadtraffic can be potentially dangerous. The user’s hearing must not be impaired to the extent that it causes road safety risks. Please also make sure that you do not use the in-ear headphones within an area of potentially dangerous machines and tools.Risk of injury!Avoid sudden movements when using wired headphones. You might seriously hurt yourself especially if you wear piercings, earrings, glasses, etc., where the wire can getcaught.Box contents• Aventho wireless headphones• Jack connection audio cable 3.5 mm• Charging cable USB-A to USB-C• Soft bag• Warranty booklet• This Quick Start GuideMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 4
How to adjust the headbandBefore wearing the Aventho wireless for the first time you should adjust it properly toachieve the best sound and ambient noise attenuation.Please refer to the following tips:• Select the appropriate lock-in position on both sides of the headband.• Adjust the angle of the ear pads.• Place the Aventho wireless centrally on your ears as shown in the middle picture.englishAventho wireless – Headphones 5Storage and removal from the packagingRemoval from the packagingHold the Aventho wireless on the head-band and pull it out of the soft bag. Rotatethe two ear cups inward so that the earpads are facing each other. Refer to the illustration.StorageRotate the two ear cups as indicated bythe arrows. Hold the Aventho wireless andput it into the soft bag with the ear cupsfirst. Refer to the illustration.Headphone is too high Perfect fit of the headphone Headphone is too lowMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 5
Aventho wireless – Headphones6Controls and indicatorsMicrophoneUSB connection for charging cable(USB-C)LEDButtonJack connector 3.5 mm for audiocableTouch padLRbeyerdynamic MIY appBy using the beyerdynamic MIY app you can personalise your Aventho wireless. The appis available for Apple iOS and Android and can be downloaded from both the Apple AppStore and the Google Play Store.Note firmware version 1.0The following descriptions refer to the firmware version 1.0 installed on the presentBluetooth headphones. MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 6
englishAventho wireless – Headphones 7Turning on / offThe functions listed below refer to the Aventho wireless when it has already been pairedwith a Bluetooth enabled device.•Turning on:Hold down the button  for approx. 2 seconds. The LED  will illuminate red once.•Turning off:Hold down the button  for approx 6 seconds. The LED  will illuminate red once and then go out.Pairing with the playerBefore you use the Aventho wireless for the first time, you have to pair it with your mobilephone or another Bluetooth enabled device. The pairing process may be different withvarious players. Please refer to the appropriate manual of the player.• When the Aventho wireless is turned off, press the button for 6 seconds to startthe Bluetooth mode. The LED  will rapidly flash blue and red in turns. • Activate the Bluetooth function on your player and, if necessary, search for new devices.• Select “beyerdynamic Aventho wireless” under the available devices in the Bluetoothmenu of your player and pair both devices. Each time when turning on, both devicesare paired automatically.Pairing and clearing the list of playersIf there are already several players in the list of your Aventho wireless and your Aventhowireless cannot be paired with another new player, the list is full and should be clearedso that the new player can be added. This is how to clear the list: • Hold down the button  of the turned off Aventho wireless for more than 10 seconds,so that the Aventho wireless will switch into the pairing mode and clear the list ofplayers simultaneously.MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 7
Aventho wireless – Headphones8Media playbackPlease note that the functions described below, depend on the player and the playersoftware and may not be available. The Aventho wireless only transmits control signalsthat comply with the Bluetooth standard.Important: To avoid malfunction, use only one finger when you use the touch pad .•Start / stop media playback:Briefly tap the touch pad  twice.•Play next track:Drag your finger forwards on the touchpad .•Play previous track:Drag your finger backwards on the touchpad .2 xMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 8
englishAventho wireless – Headphones 9•Fast forward:Drag your finger forwards on the touchpad  and hold it for at least one second.•Rewind:Drag your finger backwards on the touchpad and hold it for at least one second.•Increase volume:Drag your finger upwards on the touchpad . When you drag your finger upwards and hold it, the volume is gradually increased until the maximumis achieved. An acoustic signal indicatesthe achieved maximum. •Decrease volume:Drag your finger downwards on the touchpad . When you drag your fingerdownwards and hold it, the volume isgradually decreased until the minimumis achieved. An acoustic signal indicatesthe achieved minimum. HoldHoldMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 9
Aventho wireless – Headphones10Call personal assistant •To call the personal assistant on yoursmartphone or tablet such as Siri, Google Assistant etc.:Press the centre of the touch pad  for approx. two seconds. Call control The following functions are used to controlcalls. •Accept / end a call:Briefly tap the touch pad  twice.•Reject a call:Press the centre of the touch pad  for approx. two seconds. •Toggle between two callers:Tap the touch pad  once and hold it. 2 sec2 x1 x + Hold2 secMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 10
englishAventho wireless – Headphones 11Charging• For charging the rechargeable battery use the supplied USB charging cable only.• Connect the Aventho wireless with this USB charging cable to any USB compliantUSB port supplying voltage (e.g. USB power supply). • During charging the LED  is flashing red. • As soon as the LED  is permanently illuminated red, the rechargeable battery iscompletely recharged. • Detach the USB charging cable after the charging process.Technical specifications RF frequency range . . . . . . . . . . . . . . . 2.4000 – 2.4835 GHzTransmission power . . . . . . . . . . . . . . . 10 mWOperating temperature range . . . . . . . . . 0 to 40 °CCharging temperature range. . . . . . . . . . 10 to 40 °CDetailed technical specifications can be found on the internet at:www.beyerdynamic.com/aventho-wirelessDisposalThis symbol on the product, in the instructions or on the packaging meansthat your electrical and electronic equipment should be disposed at the endof its life separately from your household waste. There are separate collectionsystems for recycling in the EU. For more information, please contact thelocal authority or your retailer where you purchased the product.Battery disposalThis symbol means that according to local laws and regulations your productand/or its battery shall be disposed of separately from household waste. Whenthis product reaches its end of life, take it to a collection point designated bylocal authorities. The separate collection and recycling of your product and/orits battery at the time of disposal will help conserve natural resources and ensurethat it is recycled in a manner that protects human health and the environment.• Old batteries may contain substances that are harmful to your health and environment. • Dispose used batteries always according to the applicable disposal regulations. Please do not throw used battery packs into the fire (dangerof explosion) or your household rubbish, take them to your local collectionpoints. The return is free and required by law. Please dispose dischargedbatteries only. • All batteries are recycled to reclaim valuable material such as iron, zinc ornickel. MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 11
Aventho wireless – Headphones12Simplified EU Declaration of ConformityHereby, beyerdynamic declares that the radio equipment is in compliance with Directive2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.beyerdynamic.com/codFCC / IC RegulationFCC ID: OSDAVENTHOCanada IC: 3628A-AVENTHONOTICE:This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) his device must accept any interference received, including interference that maycause undesired operation.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareilsradioexempts de licence. L’exploitation est autorisée aux deux conditions suivantes:(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d’en compromettre le fonctionnement.NOTICE:Changes or modifications made to this equipment not expressly approved by beyerdynamic may void the FCC authorization to operate this equipment.Radiofrequency radiation exposure information:This device has been tested and meets the FCC / ISED exposure guidelines.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC RulesThese limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to tryMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 12
englishAventho wireless – Headphones 13to correct the interference by one or more of the following measures:– Reorient or relocte the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Made in GermanyThe FCC/IC registration number is found under the left ear pad. Refer to the “Maintenance” section on how you can remove the ear pad.This device is granted pursuant to the Japanese Radio Law (電波法) and the JapaneseTelecommunications Business Law (電気通信事業法)This device should not be modified (otherwise the granted designation number will become invalid.FCC/IC registration numberMAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 13
www.beyerdynamic.combeyerdynamic GmbH & Co. KG . Theresienstraße 8 . 74072 Heilbronn . GermanyPhone +49 7131 617-0 . Fax +49 7131 617-204 . info@beyerdynamic.deFor further distributiors worldwide, please go to www.beyerdynamic.comNon-contractual illustrations. Subject to change without notice.Weitere Vertriebspartner weltweit finden Sie im Internet unter www.beyerdynamic.comAbbildungen nicht vertragsbindend. Änderungen vorbehalten.EN-DE 1 / Aventho wireless (08.17) 667.463MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 24

Navigation menu