Beyerdynamic AVENTHO Bluetooth Headset User Manual Layout 1

Download:
Mirror Download [FCC.gov]
Document ID	3581943
Application ID	JbRcrq9yMHrvG+jImMhAxw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.72kB (559023 bits)
Date Submitted	2017-09-27 00:00:00
Date Available	2017-09-27 00:00:00
Creation Date	2017-09-26 10:43:28
Producing Software	QuarkXPress(R) 12.22
Document Lastmod	2017-09-26 11:29:53
Document Title	Layout 1
Document Creator	QuarkXPress(R) 12.22

MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 1
AVENTHO
WIRELESS
––
HEADPHONES
KOPFHÖRER
Manual
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 4
Aventho wireless – Headphones
Thank you for choosing Aventho wireless Bluetooth headphones. To ensure an optimum
listening experience, we would like to give you a brief instruction on how to use Aventho
wireless.
Safety instructions
Caution:
When you connect the headphones, please make sure that the volume level is
set to minimum. Adjust the volume level only after putting on the headphones.
We would like to point out that excessively high volumes and long listening times
may cause hearing damage. Hearing defects always constitute an irreversible
impairment of hearing ability.
Always ensure an adequate volume level. It is advisable to keep listening times as short
as possible at high volume levels. According to the Occupational Health and Safety
Regulations of German trade associations BGV B3, noise pollution e.g. in the workplace
must not exceed 85 dB (room volume level) during a maximum permissible listening
time of 8 hours. If the volume level is increased by 3 dB respectively, the permissible
listening time is cut in half, i.e. at 88 dB, the listening time is 4 hours, at 91 dB
2 hours, etc.
Danger to life!
Headphones drastically reduce perception of external sounds. Using headphones in road
traffic can be potentially dangerous. The user’s hearing must not be impaired to the
extent that it causes road safety risks. Please also make sure that you do not use the
in-ear headphones within an area of potentially dangerous machines and tools.
Risk of injury!
Avoid sudden movements when using wired headphones. You might seriously hurt
yourself especially if you wear piercings, earrings, glasses, etc., where the wire can get
caught.
Box contents
•
•
•
•
•
•
Aventho wireless headphones
Jack connection audio cable 3.5 mm
Charging cable USB-A to USB-C
Soft bag
Warranty booklet
This Quick Start Guide
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 5
Aventho wireless – Headphones
Storage and removal from the packaging
english
Removal from the packaging
Hold the Aventho wireless on the headband and pull it out of the soft bag. Rotate
the two ear cups inward so that the ear
pads are facing each other. Refer to the
illustration.
Storage
Rotate the two ear cups as indicated by
the arrows. Hold the Aventho wireless and
put it into the soft bag with the ear cups
first. Refer to the illustration.
How to adjust the headband
Before wearing the Aventho wireless for the first time you should adjust it properly to
achieve the best sound and ambient noise attenuation.
Please refer to the following tips:
• Select the appropriate lock-in position on both sides of the headband.
• Adjust the angle of the ear pads.
• Place the Aventho wireless centrally on your ears as shown in the middle picture.
Headphone is too high
Perfect fit of the headphone
Headphone is too low
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 6
Aventho wireless – Headphones
beyerdynamic MIY app
By using the beyerdynamic MIY app you can personalise your Aventho wireless. The app
is available for Apple iOS and Android and can be downloaded from both the Apple App
Store and the Google Play Store.
Note firmware version 1.0
The following descriptions refer to the firmware version 1.0 installed on the present
Bluetooth headphones.
Controls and indicators
Microphone
USB connection for charging cable
(USB-C)
LED
Button
Jack connector 3.5 mm for audio
cable
Touch pad
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 7
Aventho wireless – Headphones
The functions listed below refer to the Aventho wireless when it has already been paired
with a Bluetooth enabled device.
• Turning on:
Hold down the button  for approx. 2 seconds.
The LED  will illuminate red once.
• Turning off:
Hold down the button  for approx 6 seconds.
The LED  will illuminate red once and then go out.
Pairing with the player
Before you use the Aventho wireless for the first time, you have to pair it with your mobile
phone or another Bluetooth enabled device. The pairing process may be different with
various players. Please refer to the appropriate manual of the player.
• When the Aventho wireless is turned off, press the button  for 6 seconds to start
the Bluetooth mode. The LED  will rapidly flash blue and red in turns.
• Activate the Bluetooth function on your player and, if necessary, search for new
devices.
• Select “beyerdynamic Aventho wireless” under the available devices in the Bluetooth
menu of your player and pair both devices. Each time when turning on, both devices
are paired automatically.
Pairing and clearing the list of players
If there are already several players in the list of your Aventho wireless and your Aventho
wireless cannot be paired with another new player, the list is full and should be cleared
so that the new player can be added.
This is how to clear the list:
• Hold down the button  of the turned off Aventho wireless for more than 10 seconds,
so that the Aventho wireless will switch into the pairing mode and clear the list of
players simultaneously.
english
Turning on / off
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 8
Aventho wireless – Headphones
Media playback
Please note that the functions described below, depend on the player and the player
software and may not be available. The Aventho wireless only transmits control signals
that comply with the Bluetooth standard.
Important: To avoid malfunction, use only one finger when you use the touch pad .
• Start / stop media playback:
Briefly tap the touch pad  twice.
• Play next track:
Drag your finger forwards on the touch
pad .
• Play previous track:
Drag your finger backwards on the touch
pad .
2x
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 9
Aventho wireless – Headphones
• Rewind:
Drag your finger backwards on the touch
pad  and hold it for at least one
second.
• Increase volume:
Drag your finger upwards on the touch
pad . When you drag your finger
upwards and hold it, the volume is
gradually increased until the maximum
is achieved. An acoustic signal indicates
the achieved maximum.
• Decrease volume:
Drag your finger downwards on the touch
pad . When you drag your finger
downwards and hold it, the volume is
gradually decreased until the minimum
is achieved. An acoustic signal indicates
the achieved minimum.
Hold
Hold
english
• Fast forward:
Drag your finger forwards on the touch
pad  and hold it for at least one
second.
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 10
10
Aventho wireless – Headphones
Call personal assistant
• To call the personal assistant on your
smartphone or tablet such as Siri,
Google Assistant etc.:
Press the centre of the touch pad  for
approx. two seconds.
2 sec
Call control
The following functions are used to control
calls.
2x
• Accept / end a call:
Briefly tap the touch pad  twice.
• Reject a call:
Press the centre of the touch pad  for
approx. two seconds.
• Toggle between two callers:
Tap the touch pad  once and hold it.
2 sec
1 x + Hold
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 11
Aventho wireless – Headphones
11
• For charging the rechargeable battery use the supplied USB charging cable only.
• Connect the Aventho wireless with this USB charging cable to any USB compliant
USB port supplying voltage (e.g. USB power supply).
• During charging the LED  is flashing red.
• As soon as the LED  is permanently illuminated red, the rechargeable battery is
completely recharged.
• Detach the USB charging cable after the charging process.
Technical specifications
RF frequency range . . . . . . .
Transmission power . . . . . . .
Operating temperature range .
Charging temperature range. .
2.4000 – 2.4835 GHz
10 mW
0 to 40 °C
10 to 40 °C
Detailed technical specifications can be found on the internet at:
www.beyerdynamic.com/aventho-wireless
Disposal
This symbol on the product, in the instructions or on the packaging means
that your electrical and electronic equipment should be disposed at the end
of its life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
Battery disposal
This symbol means that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste. When
this product reaches its end of life, take it to a collection point designated by
local authorities. The separate collection and recycling of your product and/or
its battery at the time of disposal will help conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment.
• Old batteries may contain substances that are harmful to your health and
environment.
• Dispose used batteries always according to the applicable disposal
regulations. Please do not throw used battery packs into the fire (danger
of explosion) or your household rubbish, take them to your local collection
points. The return is free and required by law. Please dispose discharged
batteries only.
• All batteries are recycled to reclaim valuable material such as iron, zinc or
nickel.
english
Charging
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 12
12
Aventho wireless – Headphones
Simplified EU Declaration of Conformity
Hereby, beyerdynamic declares that the radio equipment is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address:
http://www.beyerdynamic.com/cod
FCC / IC Regulation
FCC ID: OSDAVENTHO
Canada IC: 3628A-AVENTHO
NOTICE:
This device complies with Part 15 of the FCC Rules and with Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) his device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
NOTICE:
Changes or modifications made to this equipment not expressly approved by
beyerdynamic may void the FCC authorization to operate this equipment.
Radiofrequency radiation exposure information:
This device has been tested and meets the FCC / ISED exposure guidelines.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 13
13
to
–
–
–
correct the interference by one or more of the following measures:
Reorient or relocte the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Made in Germany
The FCC/IC registration number is found under the left ear pad. Refer to the
“Maintenance” section on how you can remove the ear pad.
FCC/IC registration number
This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese
Telecommunications Business Law (電気通信事業法)
This device should not be modified (otherwise the granted designation number will
become invalid.
english
Aventho wireless – Headphones
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 24
www.beyerdynamic.com
beyerdynamic GmbH & Co. KG . Theresienstraße 8 . 74072 Heilbronn . Germany
Phone +49 7131 617-0 . Fax +49 7131 617-204 . info@beyerdynamic.de
For further distributiors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice.
Weitere Vertriebspartner weltweit finden Sie im Internet unter www.beyerdynamic.com
Abbildungen nicht vertragsbindend. Änderungen vorbehalten.
EN-DE 1 / Aventho wireless (08.17) 667.463

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:09:26 10:43:28+01:00
Creator                         : QuarkXPress(R) 12.22
Modify Date                     : 2017:09:26 11:29:53+02:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : QuarkXPress(R) 12.22
Metadata Date                   : 2017:09:26 11:29:53+02:00
Producer                        : QuarkXPress(R) 12.22
Format                          : application/pdf
Title                           : Layout 1
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Document ID                     : uuid:7a7b52c7-006d-7c48-8a92-9ca5f614438d
Instance ID                     : uuid:0da5eecf-7048-724a-8729-686a37b7eba5
Page Count                      : 12

EXIF Metadata provided by EXIF.tools