Bilian Electronic W1200 1200Mbps Wireless Dual Band 11AC Gigabit Router User Manual
Shenzhen Bilian Electronic Co., Ltd. 1200Mbps Wireless Dual Band 11AC Gigabit Router Users Manual
User Manual
Quick Installation Guide 1200Mbps Wireless Dual Band 11AC Gigabit Router Model:BL-W1200 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Operations in the 5.15-5.25GHz band are restricted to indoors usage only. 1.Hardware Connection Wall Socket Wall Socket Ethernet cable To LAN port Cable/DSL Modem Internet To WAN port To LAN port Ethernet cable Power off your modem. Connect the WAN port on your router to the modemâs LAN port with an Ethernet cable. Connect your computer to one of the LAN ports labeled 1~4 on the router with an Ethernet cable. Power on the modem and wait for one minute. Plug the provided power adapter into the Power Jack on the back of the router and the other end to a standard electrical wall socket. 2.Configuration for Windows with setup Wizard 1. Insert the LB-LINK Resource CD into the CD-ROM drive. 2. Please choose your language and click START to continue. Easy Set Assistant Wireless N Router 01 3. After confirming the hardware connection and the status of LEDs, please click NEXT to continue. 4. After the connectivity is checked successfully, please click NEXT. Easy Set Assistant Easy Set Assistant Wireless N Router Wireless N Router 6. You can rename your wireless network on this page. The default wireless name is MYWIFI. Click NEXT to continue. 5. Select the connection type your ISP provides and click NEXT. Here we take Dynamic IP for example. Easy Set Assistant Easy Set Assistant Wireless N Router Wireless N Router 8.After confirming the configurations, click NEXT to continue. 7. You are recommended to select Most Security (WPA2-PSK) to secure your wireless network. Easy Set Assistant Easy Set Assistant Wireless N Router Wireless N Router 02 9. After the configuration is completed successfully, please click NEXT. 10. Click FINISH to complete the setup. Easy Set Assistant Easy Set Assistant Wireless N Router Wireless N Router 03 is the registered trademark of Shenzhen BILIAN Electronic CO.,Ltd.All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders 2012 All Rights Reserved. http://www.lb-link.cn Ver 1.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Create Date : 2015:11:25 17:03:48+08:00 Creator Tool : CorelDRAW X7 Modify Date : 2016:02:25 14:03:11+08:00 Metadata Date : 2016:02:25 14:03:11+08:00 Format : application/pdf Creator : 123 Title : (10018841)多国语言工具快速安装指南(十二国单频系列).cdr Producer : Corel PDF Engine Version 17.1.0.572 Document ID : uuid:607939b2-f4f3-4828-ac32-84627d88938a Instance ID : uuid:678ef17d-da36-4afb-a636-375b35a4b210 Page Count : 6 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Author : 123EXIF Metadata provided by EXIF.tools