Bilian Electronic WR2000 300Mbps Wireless N Router User Manual

Shenzhen Bilian Electronic Co., Ltd. 300Mbps Wireless N Router Users Manual

Users Manual

300Mbps Wireless N RouterModel:BL-WR2000Quick Installation Guide
1.Connecting the deviceNote: Please use wired network connections only to configure the Router.Connect the WAN port on your Router to the Modem's LAN port with an Ethernet cable.（If there is no Modem, please use the incoming cable directly into the router's WAN port）.Connect your computer to the Port labeled 1~4 on the Router with an Ethernet cable.Plug the provided power adapter into the power jack on the back of the router and theother end to a standard electrical wall socket.Wireless N RouterCable/DSL ModemInternet123Wireless N RouterCable/DSL ModemInternetPCWireless N RouterCable/DSL ModemInternetPC123Poweroutlet1
Check the router's LED indicator lights display status is the same as described.42Note: If the LED indicator light display abnormal, please check whether theconnection is correct.WAN:Flashing or solid lightLAN:Flashing or solid light if the corresponding port is connectedSYS Flashing: Power: Solid lightWPS: FlashingWLAN: Flashing~
2.Configuring the deviceNote: First of all, please configure your computer's IP address to automaticallyobtain, if not clear, please refer to FAQ3.LoginOpen your web browser,input192.168.16.1 in the address field and press Enter.A dialog box will prompt you forthe User name and Password.Enter the default values and clickOK.User name:adminPassword: adminThe web management page willdisplay after a successful loginClick OK1about:blank - Microsoft Internet ExplorerAddress 192.168.16.1 Goabout:blank - Microsoft Internet ExplorerNetwork Wireless Firewall Virtual Server QOSQuick SetupStatus Time Zone Export/import Restore FirmwarePasswordSystem informationRun time System timeSoftware version00:30:0107:32:24v2.0.10.Click Quick Setup3
2Internet Paremeters ConfigurationThis page will then displayHow to select a connection type?User name and password A static IP address, subnet mask, gateway and DNS server Static IP addressThe Internet parameters provided by ISP when users apply for Internet accessNo parameters, don't use any router and don't do any setting1.Make sure the cable is securely plugged 2.If the connection type your ISP provided is PPTP,L2TP,you must go to “Network-WAN” into Configuration for DynamicWhen you choose the Dynamic IP no change required. Click “Next” to go on the next setting.Configuration for Static ModeThis page will then displayNetwork Wireless Firewall Virtual Server QOSQuick SetupQuick SetupQucik SetupDHCP (Auto Config)Static Mode (fixed IP)PPPOE (ADSL)BackBack CancelCancel ApplyApplyNextSelect a connection typeClick NextNote:to configure your connection type manually.the WAN port before detection.Connection typeStatic ModeDynamicPPPoEABNetwork Wireless Firewall Virtual Server QOSQuick SetupQuick SetupQucik SetupIP addressSubnet MaskGatewayPrimary DNS ServerSecondary DNS ServerBackBack CancelCancel ApplyApplyNext(Opt ional )Enter the IP address,subnet Mask,Gateway,DNS provided by your ISPManually.Click NextConfiguration for PPPOEThis page will then displayCNetwork Wireless Firewall Virtual Server QOSQuick SetupQuick SetupQucik SetupBackBack CancelCancel ApplyApplyNextAccess AccountPasswordEnter the Access Account and Password provided by your ISP.Click Next4
Wireless Settings ConfigurationThis page will then displayNote: The basic setting for your Router is completed. You will be able to access to the Internet, if not, please refer to the troubleshooting3Network Wireless Firewall Virtual Server QOSQuick SetupQuick SetupQucik SetupNetwork n ame (SSID)Securit yWPA Al gorithmsKeyBackBack CancelCancel ApplyApplyAES TKIP&AESNextNextB-LINK_ 90E09FWPA2-PSKCreate a unique and easy-to-remember name for your wireless network.You can also keep default settings without the device being affected.Select Security and WPA Algorithms,Suggest to choose “AES”.Set up a wireless Key,the length is more than 8 characters. Click Apply5
3.TroubleshootingFAQ1: What should I do if I forget the user name and password? (How to restore the router 's configuration to its factory default settings.)Answer: If you forget the user name and password, the only way to solve this problem is to reset the router. Press and hold the RESET button on the rear panel for 5 to 8 seconds before releasing it.FAQ2: What can I do if I cannot access the Internet?MAC Address CloneClone MACCancelCancel ApplyApplyRestoreMAC Address: 44:33:4C:90:E0:98Hold for 5 to 8 secondsFAQ3: How to configure the IP address of the computer?For Windows XP OS Go to Start > Control Panel,you will then see the following page. Click Network andInternet Connections 62.Disconnect the Router and directly connect your computer to the Modem and try to access the Internet. If you still cannot access to the Internet, please contact your ISP or the Modem'smanufacturer; otherwise, please reconnect the physical connection between your Modem, 3.Make sure that you are connected to the Router with the computer that was originallyconnected to your modem, then login to the web-based management page and browse to"Network > MAC Clone", click "Clone MAC" and then click "Apply". Reboot the Router andtry to access the Internet from your computer, if the problem still, please go to the next step.1.Check to see if all the connectors are connected well, including the telephone line (for your modem), Ethernet cables and power adapter.Router and the computer, then continue to follow the next step.
Click Network Connections Right-click Local Area Connection Click Properties 7Double-click Internet Protocol (TCP/IP) For Windows XP OS
Select Obtain an IP address automaticallySelect Obtain DNS server address automaticallyClick OK8Click OKFor Windows XP OS
Click View network status and tasks Click Properties Right-click Local Area Connection Go to Start > Control Panel,you will then see the following page. For Windows 7 OS9Click Change adapter settings
Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK10For Windows 7 OSClick OK
Click OKFor Windows 7 OS11
Press the Keyboard WIN( )+X to popup the menu on the Win8 Desktop, then select Control PanelClick View network status and tasks Click Change adapter settingsFor Windows 8 OS12
Double-Click Internet Protocol Version4(TCP/Ipv4)Click Properties Right-click EthernetFor Windows 8 OS13
Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OKClick OKFor Windows 8 OS14
is the registered trademark of Shenzhen BILIAN Electronic CO ,Ltd.All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders 2012 All Rights Reserved..Ver 2.0http://www.lefen.com

Navigation menu