| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 293363 |
| Application ID | OGZJGO9U4du7H66Zr9/AkQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 148.66kB (1858259 bits) |
| Date Submitted | 2003-01-02 00:00:00 |
| Date Available | 2002-11-27 00:00:00 |
| Creation Date | 2003-01-02 13:56:20 |
| Producing Software | Acrobat 4.05 Scan Plug-in for Windows |
| Document Lastmod | 2003-01-02 14:19:17 |
| Document Title | Users Manual |
| Document Creator | Acrobat 4.05 Scan Plug-in for Windows |
FCC Caution:
L The device complies with Part I5 of the FCC ruler. Operation is subject to
the following two conditions:
(D This devicc may not cause harml-l interference, and
(2) this device must accept any interference received, including
intcrlerenee that may cause undesired operatiom
2. FCC RF Radiation Exposure Statement: The eqlipment complies with FCC RF
radiation exposure limits set forth [or an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of ll)
centimeters between the radiator and your body.
0 3. This Transmitter must nut he crloealed or operating in conjunction with
any other antenna or transmitteu
44 Changes or modifications to this unit not expressly approved by the party
responsible {or compliance could void the user authority to operate the
equipment.
Bluetooth Application Note
_l_o_rtallin llluetooth software for Windows
0 MgtggLuliLiu setting for Windows
_l1_i_l_‘emtranster setting for
Dial’up networking set} iug tor Windows
[AX setting for Windows
nigiilor Windowr
Information Exchange 1L
information VSflyfinchronizztfiiron rellingjer Windolr
Actingyne setting (or Windowi
Serial port urging for Windofiwr
Installing Bluetonlh softwar; for WinGE
Nclwnrk shargrgmsctting larrrvljncl’.
File transfcrisctling for Wifl
Dial—rig nrtworlring 5&qu Wincg
Serial port snttinxrfor WinCE
LelwirveSynchclling for anfl
lins‘talling Bluntouth on MMLO. 5.7
Hg! in pair with my mobile phone
How to_p_Mi_g_h_Nok_ia 631!)
How to pair wirh Nokia 8910
How to pair with Ericsson T39m
“w tn..p_ai_rLi..t..1.l. Britain!“
§1g_tgm1ynt with Ericssqn_1§5 viz XTNDConncclPG
(:> Trnnhlgshooting
l.Bluetnorh snftwarc installation
For CF Blnctouth card please inslall the driver bcfort installing
Bluetnoth software, the driver can he locatcd in BTCF of the driver
CD
For USE Bluctonth adapter picasc install Bluctuoth software beforc
inscrting the USB adaptrL
Installing lllnctooth softwar: for Wind":
Plaza installation CD intu PC and sci-p shnnld lalnthautnmatically.
Ii setup docs nnl launch, us: Winduwxlixplorcr to navigate to the apploprizlc
CDfROM drive and run "Butup".
Bluetoot TM
Install Drivers and Application Software
Application Note
Readme 5
Acrobat Reader in?»
Browse this CD
Plus: select your dcvic: and 045”
Install Drivers and Application Software
USB Dongle :
NOTE : Please install the application software
before plug in the Bluetooth USB Adapter
Windows 98/ME/2000/XP
CF Bluetooth :
NOTE : Please insert and install CF Biuetooth Driver
before Installing Bluetooth Software
Windows 98/ME/2000/XP
Illinf‘: 9 n 9 Dnnbnflnf" 9nn9
rvluv: 0.11 n rubncu‘v LUUL
Back Exit
Complete these steps to install llluetooti software:
Exit all applications.
lnstullShield Wizard setup dizlag box is displayed. if the setup program
doesn't auto-run, manually start the setup program.
Follow the instructions on the screen:
On the Welcome screen, click the Next button.
lllehroih Software 1.2.2.1 . lusttrllShield Wizard
Welcome to (he Instalshield wlzard for
Bluetuath Software 1.2. .15
The Installihieldtfl) Wizard will install Bluetnoth Software
liZiZi 15 on your computer. To continue, tlrtk Next.
WARNING: This program ls protected by copyright law and
international treaties.
When the License Agreement screen is displayed, rend the License Agreement,
then eliek the radio button to the left of “I accept the terms in the license
agreement and elicit the Next button.
Choose the Device Type for your system, and eliek Next.
if? Bluelnnlli Snftwarc 1.2.2.15 , InslallShirélrl Wizard
Device Information
Please entor Informatiun about your mmpuler as you want other pimple in the ~
Bluetuath Neighborhood to see it
Device Name:
MYNOTEBOOK
Device Type',‘
installfihislrfi
On the Deslinzlifln Faldcl streen, tlicl lilt Change billion inbrowse In a new
desiinziion folder far (he Blueloolh soil-rare. Otherwise> click ihe Next
buttnn to accept the default folder.
L:- llluciuullrSullwum1.7.) 1'.| Illslallslrmld Wis-rill
Destination Folder
Click Next to install to this folder, or click Change to Inflal to a efferent Folder.
install Bluetaath Software 1.22.15 to:
C :\Program Fries\BIuetooth Suftware\
The system is really to install the Blucluulh softwarel
change any rulings, click the "llcl' bullnn. Click the
the Wizard. Otherwise, click the "Insull' hullun.
If you need in review or
"Caneel"hullnn in cxii
if." Bluetufllh Suftware 1.17.15 , InslallShii-rld Wizard
Ready to Install the Program
The wizard is ready to begin installation.
Click Install to begin the installatlun'.
if you want to ravlaw or change any of your Installation settings, clitk Back, Clitkcahcel ta
exit the wizard.
When the installation is cnmplettd, click lhc "Finish" builon on the Comp/uni
SCIECH.
lllllmmlthSultwuu-1.7.7.15 || ltlllShit'lrI Wl/(II |I
lnstallShield wizard Completed
The lnstallShIsld leard has successfully installed Bluetuuth
Software 1.2.2.15. Click mm to exit the wizard,
Click "hi" to ”stint you! cnmputcr. ll you plan in restart latex, click "No".
‘Blueluuth Snflware 112.15 Inslaller Informuliun
You must restart yciur system for the configuration
changes made to Bluetunth Suftware 1.22 15 to take
effect. ClickiVas to restart nownr Nu if you plan to
rest/avilater.
After reboot and Windows tomes luck up Again, insrrl USB adapter into the PC’:
USB port and lhcsyslrm will insull the driver for your device autumnlically.
Du not reboot. Your dcvicr is now ready lo bc used.
Tn verify the inrtallaiinn was successful.
Right click the “ My Bluclaoth Placc” icon and stir“ ”Srlup“ toniigumiinn.
Undrr the ”Hardware" lab, verify the Bllcluulh address ix present alung with
the driver and firmware version lulu.
tCSFl USE Bluatuulh Devin
If such information is not present, please unplug then plug in the USB ndnpto
to initiate the driver.
For CF Bluetooth card, please reboot the system with the CF Bluetooth card securely inserted in the
PCMCIA slot.
Repeat the installation steps for other USB adapter: or CF card on other PCr.
2,Network sharing setting lor Windows
The Network Access service permits a Bllelooth enabled PC (tlient) to access
the Internet via another Blueloolh ennhled PC (Server) that already has
Ethernet ennneetinn.
Windows network sharing setting
PC to PC (Windows 1000 or Windows X?)
l. To enable Internet Connection Sharing on the server PC
1 Click nn Start menl-->Settin;s -->Netvorh and Dial—up Connections and find
your Loon] ArenConneetion (LAN) thnt is connected In the Internet.
3. Right [lick the active LAN cunnulion in open the ”Properties” dialog box.
4- Local Area Connection 4 Properties
General VAuthentication Advanced
Connect usi
H Intel 21143-éasod PEI Fast Ethernet Adapter (Germs)
This connection uses the lolluwing items:
v 3 File and Films! Sharing Ior Microsolt Networks
[2] Sons Packet Scheduler
El ‘e-M ro SDeveIo mama"
Install... LLnimtaII
D escription f
‘ Allows your computer to access resources on a Microsoft
network.
I] Show icon in notification area when connected
It Click on "Advanced" tab and select the 'lnrernet Connection Sharing",
checkbnx to enszc Internet sharing.
General; Authentioat r| Advanced
Internet Connection Firewall
Erotect my computer and network by limiting or we'venl'nn
access to this computer Irom the Internet
Learn more about Internet Connection Firewall.
Internet connection Sharing
1 Allow other network users to control or disable Ihe
shared Internet connection
Learn more about W9
II you‘re not sure how to set these properties, use ——
the Network Setug Wizard instead: ' Setting;
5. Click on "Settings..." button and stlecl Ihz service: ynu wish to provide
other Blnelnuth devices. Click "OK" In save the changes.
Advanced Settings
5 ervices
gelect the services running on your network that lntemel users can
access.
tisrvices
FT P S erver
El lnternet M Access Protocol Var n 4 [IMAPA]
v Internal M ail Salvo: (SMT P]
E Post-Ullice PrutocolVersian 3 [PEIPJ]
El Remote Desktop
IE SecureWeb Server [HTTPS]
E Telnet Server
Web S erver [HT TF']
6. Go back in the "Network and Dizl’up Connections" window, right slink the
”llluetrrntlt LAN Access Server Driver' and xclttl "Proprrlies"..
7. Under "General“ tab, click an "internist Protocol (TCP/ll’)"
"Properties".
4; lemml Area Currirectimr 3 Properties
Generel Authentication ‘Advanced
Connect usin '
fl Bluetoclh LAN Access Server Driver
Lon" rem
This cgnnection uses the following items:
3 nos Packet 5 cheduler
1- M icrosoll IPvS Developer E dition
and
Instal ,' final
D escription ~— —
Transmission Control Protoool/Internet Protocol The Ma: r
wide area network protocol that provides comrrmicatim i
across diverse interconnected networks. ;
x,
Shay icon in notification area when connected
8. Under "General" tah, “Sign a virtual ll’ as shown in the picture
below. Then eliek “0K" to save the changes.
lnternot Protocol rTCP/IP] Properties
General
You can get IP settings assigned automatically it you network smarts
this capability Otherwise, you need to ask your network adn'nisnelor lor
the appropriate IF settings.
0 thein an IP address automatically
Gills. l , f
P address: 192 r 158 . 0 . 1
Sybnet mark: 255 e 255 . 255 . U
neleult gateway:
Ugtarrr UNS server add alrlQmallCall)‘
(D Ur; the lollowing DNS server addresses: —
Erelerred DNS server:
Alternate DNS server:
ll. This allows the server PC to net as a DHCP server towards the client PCs.
NOTE: For WinHSE 1nd WinMe, please download and install Winkoole on the
Server PC to allow llllGl’ rerviee,
ll]. On the client PC, launch the llloelooth roltwnre stuck by clicking the "My
Blnetooth Placer“ icon located on the desktop.
llr Double click the "Entire Bloelonh Neighborhood" icon to scarrh for other
Bloeloorh devires nerrhyr
WWW
My Devlce
ll. Alter searching is cumplcnd, Ioezle the computer name of the rerver PC and
double click it to discover lhellluclooll: services it has lo oller. (Lei
Bluelonlh Serial Port, Dial-up Networking, File Transfer, Network Access,
C) etc.).
lrbox Public Foldev Network
Bluetooth
Across
Sevlal part
icon lo connect to the shlredlnlernet
13. Click on the "Network Aeeesx"
connection on the server PC.
14. Click OK without entering any nernme or password. ll one is already
presenl, click OK anyway and it will still connect.
[on ’ tBluetonthNuuflonnELtiOn
““Wiz
15. Now you can access the inluncl via Blutlnnlh.
Notc: If your PC accrrscx (he lnltlntl via a proxy rcrvcr‘ rrmemhcr 1»
configur: (hr proxy setting a! you browstr program in thc clirnr PCr Cnnrulr
your MIS pcrrunnel if you’re not sum whzl (05:1.
lr To set up proxy, right click "Internet Explorer", szltcl "Propertits',
select "Connections" tab. Sclccl 'Bl|etoothNnH Cunncninn“ and click on
"Sttlingr..r".
Internet Prupcrlies
Eensral “gammy; 1] Frivaco“ Conlenk! Cflflflediflm lProwanfllAdvan-zeal
To set up an Internet connection, click . 5555
Setup. ,,
C) Dial-up and Vinual Private Network sell'uggs *
a "r: r. r,
flame
Choose Sailings if you need to configure a nruxy I 5555 ., ‘
server for a connectlun.
0 Never dial a gonneclion
‘ 0 Die! flhenever a network connection is not plated
® A|ways did my default cgnnedian
Current BluekouthNu1| Cnnnectlon 590 pefaill
LocalAraaNelwurkiLAleeningsv — ~
LAN Settings do not apply to dial-up connections,
Choose Settings above fur dial-up settings
BlueionlllNull Cunncrziinn Sutlings
Automatic configuration
Automatic configuration may nynr’rlda manual 5m. To ensure the
use of manual settlngs, disable automatic cunflgwalim
Automatlcally detect settings
Use automatic cnnflguration geript
Addy-<5
Proxy survu ~ ~ , —
Use a proxy servav for thls connaetlon (ruse saws wl not
apply to other connecllons).
Address: ”2.18.01 Purg: aol
‘ gypass proxy server for local addresses
-~DiaI-up settings
User name:
Eessword:
numalm
3.File transfer setting for Windows
Thc Filc Transfer service allows one Blucloolh devitc in pcrlorm lile
operations on (he dcizull File Translcr dircclory land Ilir folders and iilex
it contain!) of anolhcr llluctnolh device.
File (ranslcr rctting for Windows
PC to PC
It Aitcr snceenlul UXB adapter ulup on lvro PCs, launch tthluctnnih software
slack on both PC; by clicking lhe 'Hy Blotlooth Places“ icon locatcd on the
deiktnp.
2. On one PC only, double clicl on '|!n|ire Blnctuoth Neighborhood" icon to
scratch for other Illnclootll devices nearhy.
lnulc [he name of PC Hill you with (0
lil lo discnvcr thtBIuelnnth scrvices it
FilcTrnnsicr,
3. Mlcr scanning is comnlnltd,
llflnsfcl (h: [ilc in and dnnblr. tlit
Blnclnnlh Suizl I‘ori, Dial up Nclwnrking,
ax tn offci (LL
0 Network Access, ctn.)<
Bluetooth
Serlal Poft
O 4. Bnnblc click the "Public Folder' icon to opcn the Blnzlnnlh shared fold” 011
(in: “he: PC.
5. Locate the fil: you wish in “and“ lo lhal PC and drag it inln [in "Public
Folder" window.
a window will pup up in indicate that a file transicr
6. A1 (his time,
d thtn Iiic transfer 111“ bcgin.
cnnncclinn is being establishcd, an
C)
74 The tile will be npened nnee the trnnster is completed, if the "Start
Automatieally" ehcckhox is selected.
My Eluetuoth Places\M{QeW(E
g |_-i , mum SeviaIPovt
4. Dial-up networking setting for Windows
The letl’llp Networking terviee permits a Blrletnoth clicttl to use it mndem that
is physically connected to a different Blnetooth deviee (the server). After the
Bluetnnth wirelerr cnnneetinn is established the client can use the server 5
mnilem as if it were a local device on the clienil
Tn establish a Dial-up Netwniliing sessinn.
Dial'np networking setting for Winduws
Connection: are initiated from the client:
1. On the client, in the Fnldeis pane nl My Blnetnnth Places“, select "Entire
Bluetooth Neighbnrhund".
24 In the right pane of "Entire Blnetonth Neighborhood", righl- elick anywhere
except an a device name and select Refresh irnm the pnp- up menu.
3. In the Folders pane ni“Mylil11etnnth Plates, righiwzlick the server that
will prnvide the Dial~np Networking Serviee and select Dircnvcr Available
Scrvicnt lrnrn the pup up menu to update the available services lisii The
available services w1ll be displayed in the right pane ni "My Bluetnnth
Placer".
Q? My Bl11etuoil1Places\intire Bluetnotli Neighhnrlinnd
Eile Edit flew BJuelonlh Favariles Louis flab
Quick . Q l? IO search 93mm
Agidrass Q My Bluetooth Places\Ent|re Eluetuoth Neiwmhood
El {a My Documents
8 My Computer
E Q My Netwakalaces
fi Recycle Bin
I5 9 My Bluetooth Places
@ My Devlce
if; BTW 1 29 Retail Packaga Engl
it In the right pane ol"MyBl11e|n11thP|ace1", donhlefnlick ”Dial‘np
Networking".
“7 My Bluetnnih Places\[niim Blucloulli Neighlim huntl\l39
“is fidit mew BJuetuuth Favorites Tools Help
em . if; g; psm aim $1
Address Q My Bluetuoth i’luces\Entive Bluetnnih Mi 139
F_u|1:lers , A ,, J x la fi a i Q
Inbox IYMC Sevial Part 1
Synchronize
E] if) My Documents
m £3 u. ’“._.ve,.
m 3 my eumputar
(B Q My Netwurk Places
x57 Recycle Bin
(3 My Bluetnuth Places
9 Q Entire Bluetonth Neiuhb
m (a Tag
m <3 NEC Adantev
@ My Device
“mm.
Serial Port 2
~=.
n n .,r, \
5. in the Connect To dialog hux, type in your user name, purrword, and the
phone number to he dialed, and then click the "Dial" button.
64 Select the “Save password" thechbux and the dining box will not zppcar for
subsequent connections to the same phone number. You run now open a web
browser and connect to the lnternett
Note: When using the Gl’RS Dial up fuuetion, you do not have to type
in the user name or password.
tunnecl BltlelonthConncclian
Ewe this user name and password In! the lulluwing um
GMeanb'
0 Anyone who use: this computer
Network Connectiu ns
Make the phone number change permanent?
Connecli rig BIuetnflthCn nnection,“
@ Dialing 034121234...
To close a Dinl’np Networking connection
I. On the client, in the Folder: pane of 'Hy Ilnetooth Places", select
(highlight) the device that is providing the Dial—op Networking service
1. In the right pane of "My lllnetooth Places", right-click "Dial-up
Networking" and then select "Disconnect Dixl’up Networking" from the pop-up
menu.
5.FAX setting
The Fax service allows a Bluetootl client to witelcsslv send a fax using a
device that is physically attached to a Bloetoolh serven
FAX setting for Windows
To send 1 Fox
Connections are initiated from the client
I. On the client, in the Folders pane of 'Hy Bloetouth Places", select "Entire
Blnetooth Neighborhoodfi
2. In the right pane of "Entire Blnetooth Neighborhood", right-click anywhere
except on a device name and select Refresh from the pnp’np menu
1 In the Foldcrs pane of "My Bloetooth Places", right—click the server that
will provide the Fax service and select 'Direover Available Services" [tom the
pop—up menu to update the available services list. The available services wi]
bcdisplayed in the right pane of my Ilnetooth Places".
4. In the right pane of “My hluctooth Places", double—click Fax. After the Fax
connection is established, open or create the document to he faxed and nscthe
“Print or “Send to Fax Recipient option available in most applications. Tm
Fax conncction closes automatically when the transmission is completed
6.Informntion Exchange setting
The Information Exchange service provides a way to send and receive Microsoft
Outlook items to and from another Blnetooth device, such as a Personal Digit“
Assistant or notebook computer
The supported Outlook items are
k Business cards (*.vcf and *_vch
* Calendar entries (*.vcs)
fr Notes (ch. vnt)
* Messages <*.vmgl
There are three types of operations:
* Send——sends an ohjett to another dcvieu
* Bcrcivc-—requests an object from another device
* Bxchlnge‘-scnds a client object and receives a server ohjecL
The default location of your business card and the location where received
items are placed can be configured in the Bluelooth Configuration PaneL
To send, receive or exchange an object: on the client, in the Folders pone of
"My Bluetooth Places", right-click the Inbox icon of the remote device and
select an option from the pup’up anL
Business cards are sent, received or exchanged without further intervention
To send Calendar Items, Notes, and Messages, navigate to the folder that
contains thcitem you want to send, select the item, and then elicit Open.
7.Informatiun Synchronization setting
The Information Synchronization service is used to synchronize information
(e.g., a Personal Information Manager database) hetween a Bluetuoth client and
a Bluetooth server. BTW supports synchronisation with devices that support
IrMC v1.1 and exchange the v1.1 vCard format.
The first time Information Synchronization is used with a new application it
may take a few minutes to synchronize the datahase; the data from both devices
must be merged, duplicate entries deleted, and then the updated database copied
hack to both deviceo
Subsequent uses oI Information Synchronization, for the same application, are
much laster——on|y the changes that have been made since the databases were last
synchronized must be exchanged. Microsoft Outlook is the only Personal
Information Manager supported in this release oIBTW. Outlook permits duplicate
entries, so all duplicator may not he exchanged in the synchronization process
Only Outlook 3 default contacts {older is synchronizedi Items in suh~lolders
are not synchronized. Items that are moved from the default folder to a sub-
folder will appear tohave been deleted the next synchronization takes place.
To use Information Synchronization
I. On the client, in the Folders pane of “My Bluetooth Placer", select "Entire
BluetoothNeighhorhood‘h
‘24 In the right pane of “Entire llluetoollr Neighborhood", right-click anywhere
except“ a device name and select Refresh from the pop>up menu.
34 In the Folders pane of "My Bluetoorh Places", rightfclich thc server you
want to synchronize with and select “Discover Available Services" from the pop-
up menu to update the available service: list. The available services will be
displayed in the right pane of "My Bluetooth Places",
to In the right pane of "My Bluetoolh Placer', double-click “Information
Synchronization" to start link
31 My Ellrelnnth l’laccszy Device
File Edit Vlew Bluetooth Favorites Tools Help
finch v 433 ha; pSsarch L]: Fddevs '
Address Q, My Bluetooth Places\My Devtce
Bluetnnkh Ta ks
Bluetuolh ' Fax File Transfer
Serial Park
Other Places , y
', Information
[a filtered Documents Exchange
it, My’ Blnetoqth elaceé
Prupertius
A dialog box displays synchronization progress and, when the process is
complete, indicates that synchronization has successfully completed.
The connection closes aulnmatically when synchronization is completed.
Note: if an error message similar to the one below appears when you try to
exchange business cards, please make sure a PIM is inrlalled, e. g. Microsoft
Outlook Exchange, and to select the 'Save Ohjeets in Personal Information
Manager" option in "Bluetuoth Contiguration'.
My Bluntnulh Plant-ts
Local service failed - Error code : The ‘Save objects in PIM‘ [5 not thanked in the Configuration Panel.
Ultwlnoth Configuration
1. linEoISarynzes ”foam/trimmers)? ll Hardware "Tammi{Notifications}
General Accessibility Discovery Information Exnhange
File Transter , fl
, ‘rfl
My Shared Directory
Send Business Card 7
[HO
y Businesx Ca
Receive Business Card 7 *'
n‘ Save Uhiects in Personal |nlolmali0n Manage
My Inbox Directory:
C:\Documents and Seltings\hn\8luelooth Soitward
Accept Business Cards
Accent Calendar Iloms
Accept E mail Messages
Accept Notes
——-:Ha ,
8. Serial port setting
The Bluetonth Serial Port service allows lwn Bluetooth devices to establish a
wireless connection through virtual eonnuniulinns ports and then use that
connection as if itwere a hardwired serial cable between thc devices.
To establish n Bluetnnth serial port ennneelion:
Connections are initiated from the client
It On the client, in the Folders pane of 'Iy lluetooth Places”, select ”Entire
hluetooth Neighborhood'I
24 In the right pane of "Entire llnctooth Neighborhood", right~cliek anywhere
creep! on a device name and select ‘lelrerh' from the pop-up menu
3. In the Folders pane of ”My Blnetooth Plaecr', right-click the server you
want to establish a connection with and select 'Dircover Available Services"
from the pnpupmenu to update the available service: list. The available
services will hedisplayed in the right pane of 'Ily Bluctootb Places“.
to In the right pane of “My Blletooth Plaees', doublc’clicl "Bluetooth Serial
Port". A dialog box appears that contains the communications port number
assigned to this connection hy the clientt The application that will use this
connection must be configured to send data to this porl
Depending on the security couliglration, the dialog box that provider
communications port information may not appear until after Authentication am
Authorization havc been accomplished
The application on the server must be configured to use the correct
communications port.
To determine the communications port being used by the service:
* On the server, in the Folders pane of “My Blletooth Places", right'click “My
Device" and select "Properties" from the pop-up menu
* In the ”hluetooth Configuration Panel', select the "Local Services” tab
k Doublc“click the "Bluetooth Serial Port' service to display its ”Service
Properties" dialog hoxc The "Service Properties' dialog box shows the
communications port the connection is using.
To close a Bluetooth serial port connection
Connection: are normally closed from the client
d On the client, in the Folders pane oI 'ly hluctooth Places", seleu
(highlight) the device that is providing the ‘Bluetooth Serial Port” service
* In the right pane of "My hlletooth Places', right—click "Bluctooth Serial
Port” and then select ”Dirconnect Bluetooth Serial Port" lrom the pop-up menu
Though not recommended, connections can also he closed from the serveu
* On the server, in the Foldcrs pane of "My Blletooth Places", select
(highlight) "My Devicefl
k In the right pane of "My Bluetooth Places", right—click "Bluetooth Serial
Port" and then select Stop to close the service. The service must he re—storted
before it will be availohle to remote devices (right-click Bluctooth Serial
PM! and select Start from the pop-up menu).
9.ActiveSync setting
AetiveSyne rotting for Windows
LRight-elick on Iiiuerootlr Configuration icon from the toolbar in the desktop
window. Select Setup 1nd then open Configuration window.
24 Select local Service toh from the Bluetooth Configuration window. In the
Servire Properties window, please learn by heart the current COM port this
computer uses, for exomp1e100ld 6, in order to identity this value with the
configuration of Microsoft ActiveSyne laterr
I'llurrtrmth Configuration
MM,“ ejzzsxbfltgh __°iS°W°'v,Jl_' Mo'mefimmmsz‘
Localsewices I communications ll Harm It Versionlnto it Notifications
Double click a service name to set its security and steam properties,
Specity the services that this computer wit provide to other Bhretoalh devtcex,
Encr CUM Potlr
File Treneter
Information Exchange
Dial-U p Networking
N etwark Access
Blustu th Serial Putt
in the Microsoft ActiveSyoc window, select Couuecriou Settings... from drop—
own list of File menu.
1:1 Microsoft ActiveSyni:
bile Device
Explore
mm P mersmp
Get Connected
t rm tint
to Choose the same COM pan (in this use, it is COM 6 that Blurlnnlh Serial
port uses shown in the Step 1.)
(unsustztinn Suiting:
Click Get Connected to connect your mobile device to this
fll computer.
Status: Waiting lor device to connect Get wacted.. 1
I7 Allow serial cable or inhared connection to this CUM port
CEIMS vl
Statux CEIM poll is not available
l: Allow uSB connection with this desktop computer.
Slalust USB is available
Ilow network [Ethernet] and Flemolc Acceu Senna: IRAS
' ' ' «duo
Status: Network is available
Status icon—Vic w v —— 77,”
l 17 Show status icon in Taxkbai. CE 1.2 2
Software nn your Wall
O f) 011 the hindhcld (FDA) dcvicc:
Tap "Yes" to accept thc dclault dircttory 2nd install lhc xnflwarc
g) A Welcnmc scrccn will be xhnwn with basic instructinn: In us: BTW-CE
h) Check all "Add a shortcut in the Start menu" in nrdcr lu havn acccsx tn 1m
"Bluctoolh Manager" from the Start ucnl
f Installing WIDEUMM E] 45 2:53 Q
lDEflMM BTW E
he stalla an was successful!
in order tn rumplete the installakinn,
please reset your device,
How to use Bluetouth (after reset):
I Cunnectiuns are established by uslng the
Bluetooth Manager, available me:
Start > Prourams > Bluetooth Manauer
E Add a shurtcut In the Start menu.
0 The Bluetooth icon at the huttom hi
the screen allows you to configure
Bluetuuth and adjust various settings.
- Within Bluetaath applications, help is
available via Start > Help
i) Perform a “soft use! to the hindhtld campuier. Refer ln your device:
documentalinn far the exact prucednrt.
NOTE:
A salt rrsel Iravrs ins/all“! appliutian: and slam! Ala“!
inlul, and simply res/an: 1h: dzvicct
() A hard rue! dale/er ALL dau'nludtd appll'tarinn: on [lit
' band/uh]. See lbr handlirld [nmpnlrl x durumznlarinn fnr
nddilianzl infnrmuian.
Blnctonth Cuntrnl Paul: Configuring BTW-CE
BTW-CE provide: a Control Panel ll) adjusl Blucloolh sailings,
To access the Control Panel, tap the Bllclnolh icon in the low:r~vigh! turner
of the Today screen.
liil aunt
‘Gllndny, mml Ul, zuui
itoday 5 ==
Tap here to set owner lnfarmatlun
(T
[M Na upcoming appointments
g Nu unread messages
NU unsent messages
Nu tasks
arc savcd in prnlilcs, which can be qlitkly loadcd to mac! Ihc appropiinte
BTW-CE can have multiple saved coniiglvalions. Individual cunfigulalion sets
silualinni
The Control Panel has seven tahs. All tahs are not visible on the Screen at
the tame time; use the arrows tn the right of the tab names to scroll hack‘
andrforth and expnre the different laha.
There ure server tuhs in the enutrul panel:
* General
User profile selection
Bluetnoth rtatur (ON/OFF) indicator
Hardware power contrnl (ON/OFT
Shnrtcut to the Bluetonth Managen
kAeecssihility
Set the device name
The card 3 Bluetooth Device Address (Bd_Addfl
Determine which remote devices are allowed to connect
Determine whether this PockelPC can be seen by other remote device»
* Service tabs——hTW-CE can provide four xervitesc They are:
File Transfer——Scts the highest-level of directory on this PocketPC that the
remote devices will have access (or
lulurmrtion Exehangc-—Sets the default business card (Pocket Outlook eontnet
entry)
Serial Porl‘—Bluetuoth serial port information
Dial-up Networking—‘configure the COM port, baud rate and flnw cunlrol.
k Ahoutvgthere are no configurable options on this tab.
Software verriun infnrmatiou
Copyright information
Website and Technical Support liuhs
There are three options on this sereer
if Current Profile: to change the active profile. tap the down-arrow in the
“Current profile: field and select the new profile from the drop-down list.
The current prufile will he saved, and the tettings from the selected profile
will be loaded. To add, delete, or rename a profile, up
7': Bluetooth Status:
Integrated Blnetnnth hardware.
External Blnetnoth hardware (Compact Flash or PC expansion card)
it Illuetnnth Manager:
Tapping nn this shortcut starts the Blnetooth Manager.
When Bluetooth is 0”, no eonneetinns, incoming or nutgning, are pnrsihle.
When Bluetoolh is ON, Eluctouth is always ‘Up' and battery drain is
significantly greater than when Bluetonth is disabled. To conserve battery
pawer, do not enable B/netanth when il fr not being used.
‘n-Ihnus t.
m. mk.
Bluetnnth: General
Current profile
—§a
Bluetnnth status
Bluetooth Is ON
Remove the Blustnnth card to tum it eff.
Use the BlunmuthMauaueL to set connections.
‘ e D
General
Accessibility page displays device information. Yuu can modify your device
name in here. This name will show on other Blnetooth devices.
Ill] information on this tab is saved with Ihc active profile, including the
device name.
The options on the Accessibility tab are:
it Device Identification:
Namerrthe name of this device, as displayed to remote devices when the
assoeiated profile is active. To change the device name associated with this
profile, highlight the name and enter the new name
Addressf—the Bluetooth Device Address (Bdidddr) of this device. This
information is permanently associated with the Bloctooth hardware during the
manufacturing process and cannot he changed
* Accessibility:
Allow other devices to connect, when this option is enabled, other devices are
permitted to connect tn this devicet Two mutually exclusive sub-options
provide additional refinement. They are:
frAll devicesffselect this option to allow all devices to connect.
kPaired devices only*’sclt[t this option to allow only devices that have a
paired relationship.
Other devices can discover me, when this option is enabled, other Bluetooth
devices can see and report this device. Even though remote devices cannot
discover this device unless this option is checked, if a remote device has
this device’s llluetooth Device Address, that device may still be able to
connect to this device.
m m-ttnup. 1:41“ -_ '
Bluetaneht Accustblllty
Devueldanflfleauon
Name: CE Devlce
Address: unavailable
Accessimllty
Allow other devices to connect
© All devices
O Palrad devices only
other devlces can discnvar me
Click File Transfer page it displayed your GE dcviee shared folder
information, you can modify your CE device shared foldcr here.
The options on this tab only affect ineoming File Transfer EnnnectlonL
There is one additional configurable item: “Ky shared folder which allows
you to specify the default File Transfer directory, the highest level
directory on this PocketPC that remote deriees havc access to.
To change the default File Transfer directory. tap folder navigate to the
desired directory, and then tap the 'OK' hntlom.
Bluetnnt e Transfer
About this service
V Enable service
Authorization required
Authentication (Passkey) requlred
fil Encryption required
My shared [alder
\My Ducumentflflustness
Information Exchange page displays your business card. You can set your
business card in here.
The Common Options on this tab only affeel incoming Information Exchange
connections.
There is one additionzl configurable ilen: “My business card (VCnrd)
The “My business card information comes from a selected record in the
Contacts list of Pocket Outlool‘ lnformnlion from the selected record is sen
to remote devices on request. [I is also the contact informltion that is sent
when you select “Send your business card to one or more recipients while
using Business Curd Exchange
The default selection is Knone (no information)
To select a vCard, tap , choose a conlact from the list, and then tap UK
To discontinue sending contact inlormztiou when it is requested, tnp , choose
“(none) from the list, and lhen Ilp OK
If you reach the contacts list by mislnke, tap 0K to return to the previous
screen
Bluetouth: Information Exchange
About th|s service
V Enable service
I: Authorization required
Authentization (Passkay) required
: Encryption required
My business card (vCard) EB
(None)
Information Exchange
Serial Port pnge displays your Serial Port selling.
The configurable option: on this “Ir only affect incoming Serial Port
ronncvtionil
All of the Common Options (see Seelion 1.3‘l) are uuailabln
There are two additional, non—configurable ilemu
* Inbound COM Porti the Ioczl communications port that is used for inbound
serial connectional
* Outbound COM Fort: the Inrzl eonnunitalioni porl that is used for outbound
serial connection;
C/ The Inbound and Outbound COM polls are permanently assigned and tnnnnl be
changed.
Bluetno
About this service
2! Enable service
Authorization required
Authentication (Passkey) required
Encryption required
Ports
Inbound COM Port:
outbound COM Port:
SerIaIPcrrt - 1 P l
Dlal’Up Netwnrking page displays ynur Dial*Up Networking setting. Yeu can
change your COM port, baud rate and Flow control here.
There are three additional items: l
k COM Purl: select the cummunicatinns port tn he usem
* Baud rate: tap the dnwn-arrnw and select 1 hzud rate frum the drop-dawn
liste The nptions range from 1,200 In II5,700 band, in nine Slch
7': Flow eunlrnl: tap the dawn-arrow and selttt the type of flow euntrnl to be
used from the drnp-duwn liste
C The nptinns are: ‘
) i
Off
Hardware (RU/Ctr).
H mm I|l|t|‘. li'rlln mgr
Bluetouth: DIaI-Up Networking ?
Ahnut thls service
D Enable servlce
D Authorlzatlon required
D Authentlcatlen (Pasikey) requtred
Encrypfionrequwed
Uptluns
C) COM Part: 1 .
Baud rate: 57500
Flaw control: Hardware (Rtsfcts) v
Up Netwurking
Cuuueetinu Open—Context Sensitive Menu Ontinux
Train the My Connections sereen, tap and held a cannertinn ienn that is
assneialcd with an OPEN eonnectinn to neceu the context sensitive menu.
The Menu uptiuns are:
>'< Disennncetfclose the open eauneclinn
% SIaIns——selert lhir option to display the Cnnneelinn Stains screen (double-
Iap default).
Bluetnnth Mana
Blueto oth
My Shuvtcuts
My Shortcuts
Connection Statue Sereen
This screen displays:
The canneclion name
The remote device 5 name
The canneelion status: Cunnerted/Nul Cnnneeled
The length of time (he cunnertion has been aclive
() Activily inl'crmalinn:
The amount of data sent
The amount of data received.
A graphic signal rrrenglh indiealnu
Iuluetnuth Manager <4 3:45 Q}
Bluetooth: Connectinn status
[nternet Via Rrflflllldfi
Davina: R_8001d5 [HZ-18.15.21]
Status: Connected
Duration: nu:05:20
—- Activity
Sent —§ifi— Received
..
239 K9 ' 32.3 KB
—Signal strength
Network tharing setting for WinCE
Explore Bluetooth deviee in your range
I. You ezn check all the available Bluctooth devices by using "Gnnneetinn
Wizard“. To start "Cnnnection wizard', please tap the "rt-r B“ icon at bottom
l bar of the "Bluetooth Managerh
Blunt aflrtnana er
Bluetooth
My Shortcuts
U card
Exchange
unnec xan
wizard
MyShurtcuts
, , ,
2. There are many connection types In choose from in the ”Cnnneetion Wizard“
The first eonneetinn type explore; all available Bluetnnth deviees within the
Bluetooth connectivity range. Other conneelion types explores specific
services in the Blnetuoth device, e.g. Dill’Up, Information Synehrunization
(AetiveSyne), File transler.. etc. Please cliek "Explore | Bluetnuth deviefi
then click "Nextfi
* Bluetooth
Connection leard
connect to the lnternet
Access the internet using a network
access paint, a cell phone or another
connectau muerontn uevtce.
@ Partner with a cell phune
Establish a partnership with a cell
phune and setup the Bluetuukh
services it nFFers.
Activesyn: vla Bluetuoth
3. Fallow the "Connection Wiuril', tap the device xeleetinn box in the middle
of the screen, it will jump tn the next Pigtl
E nne
* Bluetuuth Cnnnectiun Wizard
Explore a Blueiuulh device
Device:
Tap here to charm: a device
— Haw to use this screen
10 select a device] tan inside the device
sulectlon box above. After the Ilst anpeersl
choose a device.
Tap ‘Next' to continue or ‘Beck‘ to return to
the prevluus screen To exit thls wlzerd
without completlnq the connecttan‘ tap
'Cance|'l
4‘ All the Biuctooth enzbled devices within Ihe distuverablc range will be
shown.
In this example we will aclect Ihc anus point icon"R_80|Jld5[l72.18...".
Blustuuth Browser
Please select a device:
. as: '
®~ Est en
IDSEIAP- BIQDNI R_8001d5
28164Ub... [172.13....
T39
_ . _
5. All the available services for this device ire shown at below. Select the
service that you’d likc to use and create 3 connection rhnrtcnt for this
device, then tap "Next” to the next step.
nnoctum W
Bluetuoth Connection Wizard
Explore a Eluetooth device
la R_8001d5 [172.1832]
'— Service Selection
E—gtmv Access Using PPP
Q Dlalcup Networking
Please select the service(s) offered by thIs
device you would like to create connection
shortcuts For.
— security
_ Lise a secure, encrypted (unnoctlon
Q Cancel 0 Back Next I)
8. Tap "Finish" to create a shortcut to lhc Access Point on the Blvelooth
manager.
lllllll lull ledltl
Bluetooth Connection WIzard
Explore a Bluetooth devlce
@ R_8001d5 [17118312]
— Shortcuts created
Connection shortcut(s) for the service(s) you
C) selected were successfully created.
To connect:
From the Bluetooth Manaoer "My
Connections" screen, double-tap the
connection. Or tap-and-hnld the connection
icon and select 'Connect' from the menu.
Finish @
B. If you want to use this service, double-lap the icon, or tap—and-hnld the
connection icon and select "Connect' [ram the menu. Then you can access the
Internet.
Bluetnnth Manage
Bluetooth
My Shortcuts
R_BOE|1d5 T39: Dlal-
[172.18 . up
LAN ACE... Networki...
My Shurlcuts
Note: Consult the M15 personnel in your cumpnny (or proxy setting if
necessary.
For setting up the Proxy to surf lhe Internet via a Blueloolh Access Point;
L Click on ”Start“ button, click "Settings", and "Connttlions" tab, Click on
the ”Connections“ icon.
2. Change the "My network card tonncels loz' drop-down lixl It) "Work", change
(he "When needed, lutomztieally connect lo Work using these sellingn” drop-
down list to "Work Settings“, and click “Modify",
Cunnectmns
when neededJ automatically connect
to The Inkernet using these settings:
When needed, automatlcally connect
to Work using these semngs:
Work Settings v
is My network card connects to:
Work v
Cunnecticrns
3. Click on the “Proxy Sellings' lab, and selecl bnlh checkhoxes, Ihen enter
the Proxy IP address obtained from you 1118 personnel.
Work Settings
V This natwurk connects to the Internet
hls netwnrk uses a proxy server In
connect to the Internet
Proxy server:
172. 18. n. 11
Pruxy Sattlngm
123L‘1 2 a 4 5 e 7[j£|gln
Tahqw|e|r|t|y u I a
cape s|d|f g
h ] kl '
Sh'ft 1|x c thhrlelrJ. I
File trxnsfer setting for WiuCE
File transfer service lets you transfer yiclurts, documcnls nr music files in
athcr Blucloolh devices. Starling lilc transfer by using "Cnnnctlinn wirard"
from Bluciooth managcn
l. A! ”Connection wiurd", tap "Browse files on n remit device", lhcn up
"Next“.
\ * Blustunth
C) Connection Wizard
Partner with a cell phune
Establish a partnership with a cell
phune and setup the Bluetunth
services it offers.
ActiveSync via Bluetmrth
Setup an Actlvesyn: partnership wlth
a Eluetooth enabled computer.
t Browse files on a remote devlu:
h d»—
2. Follow lhc instructinns on (hr srrctn (0 [hr nrxl slap.
Ennnnctlon Wizard 4g 3:12 Q
$ Bluetooth Connection Wizard
Browse files on a remote device
Device:
Tap here to choose a device
— How to use this screen
Tap the selection box above and choose a
computer or handheld you would Ilke to
exchange files wlth.
Top Next' to Continue 01 ‘Back' to return to
the previous screen. To exit without
completlng the connection, too 'Cancel'.
__’.——
mun-um" wharul 45 fun QB
Bluetooth Browser Bluetooth Connection Wizard
Pleele Select a device: Brme fies on a remote devlce
e 3 “e“
' mTRYIl-MID
Bluetooth Nokia 8910 PORTATIL- Desktop (maker
Modem - Mio 00:10:so:00:z9:A5
Serlal No.
105772 —How to use this screen
no the selection box above and choose a
counter or hominid you would like to
exdunoe mes wth.
169 "Next' to confine or ‘Back’ to return to
me previous screen. To exit wlthout
O comoletiru; the convection, tap 'Cencel’.
4. Fullnw (lie instructians in cur-plclc Illc connection selling, and now you can
transfer files bclwecn the two devices.
onnectiun Wizard «15:22 G} cannemun W'lzurd
Bluetooth Connection WIzard $ Blimfl'l Connection Wizard
Browse Files on a remote device Browse "es in a remote device
PURTA'IlL-MID PCRTATIL-IVIID
— Securlty Settings —Ileadv to connect
Move the slider to set the security level for You are now ready to connect to the selected
connections wlth this remote device. devioe and start sent“; and receiving files!
Top "Fiish' to We H're connection.
* ' || ' “W —shnrm.t creatitm
.. one“... _
ALILI Itsl ILILuuul I utsduluu
Encrypflo" disabled lgl Create a shortut for this cmnsctlon tn
. . the W Cntltectbm’ screen of the
Connections can he made without “M “mg“
requiring a passkey. Carnelian mane:
' ' Fills on PORTATlL—MIO
Change the Remote Deviee Folder
To move down in the directory structure of the remote devise, tap the new
folder in the main portion of the Bluetoolh File Explorer window
To move up in the directory structure of the remote deviee, tap the ann-arrow
to the right of the currently seleeted [older and select the new folder from
the drop-down list.
File Menu
All of the following instructions in the subsections assume that there is no
open File Transfer connection with a remote devite.
Send I File to the Remote Device
To send a file to the remote device, from the File menu, tap Send a File - n
displsy the Open screen
The options on the Open screen are
* Folder——tap the down-arrow and select the lolder that contains the file to
be senL
* Type——the only option is “All Files (*. *)
k A list of files in the selected (older; tap the file to be sent
k Cnneel button-—ahorts the Send a File"~ operation
The seleeted file is sent automatieally when it is tapped, without further
intervention, and the Bluetonlh File Explorer main screen reappears
Create a Folder on the Remote Deriee
To create a (older on the remote deviee, navigate to the [older in which the
new folder will be placed, and then, from the File menu, tap Create a FDldCL
Enter a name (or the new folder while the default name (New Folder) is
highlighted.
Get a File From the Remote Device
To get a file from the remote derien
1. Navigate to the (older on the remote device that contains the file
‘Z. Tap the desired tile to highlight it
5. From the File menu, tap Get.
The file is copied to the local loldee listed in the Local Folder lield near
the top of the screen.
This operation can also he performed using the tap-and-hold technique: tape
and-hold the desired file and select Gel [run the pnp'up menu
nk
Cliffin Clouds-jag 07/26]... 122K
Dhgunalsandu.. 07/261”. 126K
Iceberngq 07/26/u. 177K
Sample-jag 07/26]... 9.66K
QThumbsdb 07/26]... LQJJK
____———
Local Folds
Delete o File on the Remote Device
To delete a file on the remote device: tap the file to be deleted to highlight
it, then, from the File menu, tap delete. Tap 0K in the eunlirmation dialog
bflL
This operation can also he performed oxin; the lap-nod—hold technique: tap-
andehold the desired tile and select Delete From the pup-up menu. Top UK in
the eonlirmation dialog box
Cliffin Clouds.ng 07/26]... 122K
DiagnnalSand.... 07/261... 126K
L7; Icebergjpg
Eil'l'llidEflng
Thumbs. db
19.0K
Get
Rename
Delete
Send a File
Erea e a Fulder
Dial-up netwurking setting for WinCE
Dial-up Networking allows you to annual lo a rrmule computer that is
connected tn 2 phone line. Oncc connected, you can browse the Internet, check
your email, etc.
The remote Bluctuuth device thlt will prnvidc lhc Dial’up Networking service
must have access to a tclcphnne syslcn (either a physital or cellular
(:> connection)
Devices that might prnvide the Dial-up Nelwnrling service include:
* Bluctnuthfenahlcd cellulzi tclcphnncs
* Bluethoth“cnahled desktop computers lhal llt allached lo a telephone system
* Bluetooth modemL
The remote computer tn whith you are tonneeling must also be attached in the
phone system and capable of answering 1 call.
1. Tu begin dial-up networking setup for uxing a cell phone, please tap
"Partner with a cell phone" lrum lllucloulh cunnrrliun wizard, ind click
"Nextfl
C) NOTE: For some mobile phones, eege Ericsson, we recommend you use the ” Explore a Bluetooth
device" option rather than the "Partner with a cell phone" option when pairing.
* Bluetuuth
Cunnectiun Wizard
Explore a Bluetuuth device
Discover the services another device
offers and create connection
shortcuts fnr them.
Ennnect tn the Internet
Access the Internet using a network
access paint, a cell phone or annther
connected Biuetooth device.
Partner with a tell phone
2. And prepare your cell phnnein Blnclnnth Ilnclion enable mode, (To enable
your cell phone’sliluctaoth function, plurc refer to the user’s guide of your
cell phone i and up "er!" lo ooniinlo.
Eflnnedlon Wixurd
* Biuetouth Connection Wizard
Partner with a cell phone
4:15:43 Q}
44 5:44 G}
* nineteenth Connection Wizard
Partner with a col phone
EonnEctmn Wizard
Prepare your phone
Stop 1 - Phone seloctlun
This wizard helps you to explore your
Bluetooth enabled cell phone and to create
connection shortcuts ior the services it has to
offer.
Phone selection:
v
Please select your Eluetooth enabled phone
from the list above and tap 'Next' to
continue.
Prenare yaw phone
Step 2 - preparing Mtooth
Before you can urine the services your phone
offers, you have to enable Eluetnoth on the
phone and “pai’ the devices,
In order to explore the services your phone
has to offer, 1 needs to be "Discoverable" and
‘Paiabie'. Please refer to your phone's
marimi to in! at how to enable these
homes.
Once the phone is ‘DIscoverabIs" and
‘Pa‘nbie", press nNext" to continue,
3. After searching, the Bluetoolh manager will display lht cell phoncx in
range. Double-tip the cell phone iton Ihal you wish to connrtl to and continue
to the next step to pair with Ihis ttll phonc‘
nnnt‘t Imn VII/4nd
Bluetooth Browser
Please Select a device:
45 111-13, 60
rmnll'tlltm Wl/mti
* sawtooth connection Wizard
Partner Mir 3 to! phone
Nokia 8910
-— How to use this ween
Device:
Nnkia SSH]
Phone
03:021EEz38168NB
Salad the piwne prepared in the previous
slows of the wizud by tmplnq the selection
box above and locdiio t in the list.
139 Next’ to cm or Eack' to return to
the Wevious screen. To exit this wizard
m compietinu fin connection, tap
i. Please ltcy in a passlrcy whcn prompted, and key in the same
toll phone to complete the psiring process.
passkey on tho
\/
{10:15 Q
* Bluetnuth Connection Wizard
Partner with a cell phone
@ Nukla 8910
Pesskey:
'— Hnw to use this screen
Please enter a passkny, which will he used to
authentlcate the cunnectlon and to encrypt
data transferred.
Ihe passkey needs to he numbers only (nu
lettErs), as you will have to enter it again on
your cell phone.
Check yuur phone after ynu hlt 'Next‘ and re-
enter the uasskey when prompted.
5. hp "Finish" to tomplctc this step.
Bluetuuth Connoctlcm Wizard
Partner wlth e cell phone
@ Nakla 9910
—Shortcuts created ——
Connection shortcut(s) have been created
for every supported servlce your phone
0 8151
To connect:
From the Bluetooth Manager "My
Connections" screen, doublevtap the
connection. Or tep-end-hold the connection
icon and select 'Connect' from the menu.
Great: 3 lllnctootli Dial-up connection
].Crcnte a cnnncclinn tn the device llral will pruvidc tclcphnnc access.
'2. From the Bluctnnth Manger, My Connections lob, Inp-and~hold the Dial-up
Networking connection shortcut, 1nd then select Conn”! firm the pop-up menu.
3. On the first Bluctooth: New Dill—ll]! Cnnncction scrccn, dnnblrtap New
Connection'“
‘ ilfulil’lflmutlfr «mm a:
Mulder: Dial-(In wnnzzllnn
Tap andrnnld—a
"“""“ “fl '“‘ m“ “the? man Dimer-1M: 951231
Salem 3 mnnemnn and tap a: m hggh default Hen
didingl or same ‘Nsw Carnelian to mm
mate a new phnnn hank why.
“an n- Isa this mun
rem any a name and phnm: number Far
me new um hnvk entry and an OK.
You ad mu an a tunnulion ad sclul 1m mflffiflm “W blank“ “I!
mm L x . CK "1 “M'
n mm a" "' W Thmrtly cm and yes axis file am
am
4. On the second lllnelnnlh: New Dial-up Conncclinn ecrtcn:
n) Enter a name for [he canncctian
b) If dialing outside or the dcrznll country selling, tnler [he country code
c) If dialing outside nl the delnnll nea codeszlting,en1erlheavez cnde
d) Enter the phone number (n he dialed.
5. Tap 0K
Please follaw (he Dial-Up connection procedures abnvc la complclc |hc Dial-Up
sellings‘
Refer ln lhe l’nckcll’C dacnmcnlzlinn [or assistance,
After (he cunncclion is active, npen a web Inn-is” on the Pncknll’C.
Alternatively, you tould let up Ihc tonnecliun lhe Iyzdi|innil way, if lhc
ahave method did no! work far you.
ll Click nn ”Slut" bullnn an the top 0! III: utnn bar.
2. Select "Settings", click on lhc 'Cnnntclinnx“ tub.
AvantGo Beam canneckiuns
Connect
is
Netwurk
Adapters
3. Click on the ”Cnnnectinni“ inn. On (it lop ‘lnicrncl Settings", click
”Mndify",
Connections
ta The Internet using these settings:
(j Internet Settings v
when needed, automatically connect
to Wurk using these settings:
intarnst Settings V
1! My nutwork card connects to:
Cunnuztlnns ' l r -
Q When needed. automatically connect
4, Click ”Newut” lo start a new tonnctlion.
Internet Setting!
0 Create a connactlon, or tap and hold on an
existing connection and select a desired action.
When dialing: Automatically dial the best
number
Modem
5. Give (h: ntw conntclian a “amt, sclnnl "Bluelooih Dialup Modem", and it!
(h: baud talc at "115100".
Sell gs
BT GPRS tnnnectiun
Enter a name for the cannectiunt
Select a mode .
Bluetnnth Dlaluu Modern v
Baud rate:
115200 v
6. Click "Advanccd..4", chznge the "Parily' In "Even", "Sianils"1n"l", and
"Flaw Control" In “Nnnc”.
m up 4
Advanced
Eunnedinn preferences
Data Blts: E]
Parlty: Er]
Stun Bits: 17]
Flow Control: El
Terminal ‘
El use terminal hefure cannectlnq
D Use terminal after cannectlnq
D Enter dlaling commands manually
Port Settings
7. Click an (he "TCP/ll’" lab, and nah: wt: bolh"Uscsoflw1r: cumplusion" ‘
and “Use IP header comprcssiqn" chctkhoxcs u: sclulcd. ‘
Advanced
0 Use specific IP address
I:
Use Slip
© Use server-assigned IP address
1 Use software compression ;
M Use lP header compression
Tcpnp
8. Click an the ”Name Servers" lube Snlnl‘ (INS scrvirr may require you to enter
the DNX nmlrcsxu, pIrasr check wilh rnnr GI’RS ISP Irrforr makingr m changes.
Otherwise, leave the radio huttnn selttlcd u 'llsc serveranigned addresses"
and click "OK".
Advanted
(\J 0 Use server-assigned addresses
© Use speziiic server address
ONE: 145. 93.192. 1
NEWS: 14593. 1 . 1
WINS: 0.0.0.0
AIEWINS: U‘g,qlq
Name Servers
9. Click "Next“, enter lhc phnnc numb“ [or you GPRS cunnctlinn. Then Nick
0 "Next".
57 films Connection
Country code:
Area code:
Phone number: ‘gg;
ll]. Leave the xeltings as it is in this page, and click "Finish'fi
Settlnga
BT GPRS Connection
v Cancel call if not connected within
120 secunds
1 Wait for dial tone before dialing
Wait For credit card tune E seconds
Extra dial-string mndem mmmands:
1]. Click "OK", and in the Connections page, click on the "Dialing Locations“
tab.
a) Change the ”lacaiiunz" to ”Hone'.
b) Delete the entries in "Area todez" and 'Cnunlry tndet".
c) Select the “Disable cell waiting;' ehetlrbox.
d) Enter the phone number of your 0?” service egain. Then tlieh on "Dialing
Pallernx...".
Ennnecllons
Location: HU|T|5 '
Lntal Settlngs
Area code: © Tune dialing
Country code: 0 Pulse dialing
Disable call waiting; dial *99# V
l2. Change all entries to "G", assuming you are making a local GPRS phone
call. Then click "OK'M
Dlt! 9 Patterns
For local calls, dial:
Furlong distance calls, dial:
For international calls‘ dial:
C:
(E.e = country code,- F.F - area coda; G,g =
number)
IS. Now you have set up a GPKS Blletooth Connection. Click the "Connect”
button and click “OK” without entering any user name or password, within a few
seconds you should be connected to the lnlerneL
14. Open ”lntcrnet Explorer" and start surfing the neL
Serial port ietting for that}!
The use of a Blnetnnth wireless serial port eonnection is identical to the use
of a physical cable serial port eonnection between two dCViCCL
As with a physical connection, lhc application that will use the connection
must he configured to use the correct serial port
To determine the COM port assigned to the lluelooth serial port
1. Frnm the Today Screen, tap the Illuetooth icon to open the Bluetooth Control
Panel.
2 Use the scroll arrow: at the bottom-right of the screen to expose the
Serial Port tab, and then select the Serial Port tab. The Outbound COM Port is
listed in the lower portion of the screen‘ Configure the application that will
use the Blnetooth Serial Port to send data to this port.
ActiveSynt setting for WinCE
1. To establish the ActiycSync eonneetinn on a PDA, please tap "AetiveSync via
Blnetnnth" from the Bluetoolh connection wizard, and click "Nextfl
.(onr\ccliun Wizard 46 2:05.
* Biuetooth
Connection Wizard
Partner with a cell phone
Establish a partnership with a cell
phone and setup the Bluetooth
services it offers.
AttivESync via l'lluetonth
, Browse files on a remote device
‘7 Connect to a remote Bluetooth device
to list, send and receive Files.
é
Qtancel Neut 0
C) ”if?“
1. Make sure your computer is capable ni accessing your PDA, and determine
which "COM" purl number ( For example 'COMfi") is used for incoming Blueloolh
cunncclinns (refer to Aclichync selling [orrflinflnws seclinnlt You will need
this infnrmnian later. Tap "Next" lo next slep.
* Bluotooth Connection Wizard
ActiveSync vla Blustooth
Prepare the computer
Step 1 - Biuetooth setup
To use Activesynz via Bluetooth. Your
computer has to be able to access Incoming
Serial Port Profile (onnections.
Determine which serial or "COM" port number
is used for incoming Bluetooth connections.
\ You will need this port number later. For
Q example "COM-r".
Consult Your computer's Bluetooth software
manual if necessary.
atancel Oflack Neut Q
3. Make sure your PC side’s Arlichync 'Gouucciiou Settiugi" is using the right
COM port, click "Next".
unnection Wizard 4
* Bluotooth Connection Wizard
ActiveSync vIa Bluetooth
Prepare the computer
Step 2 - ActiveSync setup
Open Activasync on the computer anti. select
“Connection Settings. . ." rrom the "File" menu.
Note: If the “Get Connected" wizard appears,
connect your handheld to the computer via
the cradle or a cable once and try again.
in the Connection Settlngs screen, enable
“Allow serial cable or Infrared connectlon to
this com port" and select the com port
assigned in Step 1.
Qtancel 0 Back Next 0
4. Tap screen and chnuse 1dtvinc on [he Iisir
* Bluetnnth Connection Wizard
Activesync via Bluetuuth
0 Device:
' W l
Tap here to choose a device
- How to use this screen
Select the computer prepared In the prevlous
steps of the wizard by tapping the selection
box above and locating It In the Ilst.
Tap 'Next' to contlnue or ‘Back‘ to return to
the previous screen To exlt thls wlzard
without completing the cunnectlonr tap
ecancel Qaack Next 0
5. Select a device you want In ust.
C) Bluotuoth Browser
Please select a device:
REDS-BSD
6. Follow the inslruetionx to create a shortcut for the Bluclnnth Aetichync
connection.
unnectiun Wizard 45 u Emineflmn Wizard 46 2:13
Bluetnuth Connectlnn Wizard * Bluetomh Connection Wizard
Activesyni: via Eluetaalh AattiveSyn: via filetnoth
REES-850
— Sim-(cut (nation
Create a shovmt for this (nnnBEtiUn
Connection "any
Ad‘ ASync win R50
~flii : I -.
Bluntnnth
Servlce dismvery
Discovering device 'R5EIE-flSEI'
5D
D use a secure, entryptad cnnnectinn
A — Ready to (nnnzct
the previous screen. To exit this wizard V0“ 3900"! ”My to stat; fiftivesvnc using
wlthqul cmnpleting the conneetlnn, tap tha devite abovel Tap IFinish tn inmat: the
C\ I " (Wm.
Qcancel 0 Back Next 0 eta-iced ¢ Back Finish 5}
lilm-Ioulh anu..~.
Bluctooth
My Shortcuts
£9
ActlveSyi-ic
wlth R505-
850
My Shortcuts
7. After the shortcut is created, ynu can see your device is connected with
your enmpiiter. You can tap "Active Conneciionx‘ to cheek the signal strength.
Eluelocith Manager <4 2:35 0
Bluetooth
Actlve Connections
— Outgnlnu Cunnectiuns
d REDS-BSD i
" Biuetonth Serial Port
— Incoming Ennnections
Install Bluetooth on MAC 0.&
The system requirement for using this USE Bluetooth adapter on MAC
O.S.,
fMac 0.8. X 10.1.4 or greater
-0ne free USB port
-Downluad Bluetooth upgrade path, "Technology Preview 2.1” from
um: //www._
the upgrade pack
How to pair with my mobile phone?
How to pair with Nolia 6310
(l). Tn activate Blueloolh on your Nnhia 63”), press "Menu”, select
"bluetooth" and “On“.
fl). From your notebook or PDA, begin a Blueloolh device search. A mobile
phone icon will show up in the right pane ol Ihe Bluetnnth software winduw
with the name of your Nokia 631&
H). Double click the mobile phone icon to discover the rervieex it pruVidDL
You should ree COM, Dial-up netwovling, Far, or more, depending on the model
of your Nnkia mobile phonn
(t). From your Nnhia 6510, select 'Se|rth for hluetooth accessories”, 1h
phone starts sezrehing fnr devices and accessorier
(5). Scroll to the device you wanl and press ‘Selcel".
(6). I! devices have nnt been paired, the user ir lsked to enter the parreode
of the desired device. (The ania Blnetnoth Passcode is a l to 16 character*
long numeric code of your choice)
(7), A Passkey dialog box will pop up on your notebook or PDA, type in the
same passkey you've entered on your mobile to complete pairing
(8). It pairing was successful, a 'Paired with k**‘ message box will pop up on
your mobile phone, You should also see a tick on the side of the mobile phone
icon in your notebook or Pllhe
U). You are now able to use the services of your mobile phone
How to pair with Nohia 8910
(1). To activate Bluetooth on your Nolia 8910, press "Menu“, select
“Bluemnth” and "On".
(1). From your notebook or PDA, begin a lllleIoolh deviee search for your Nokia
891&
(3). A mobile phone icon will show up in the right pane of the hluetooth
software window with the name of your Nohia hfllh
(4). Double click the mobile phone icon to discover the xerviees it providerr
You should see COM, Dial-up nelworhing, Fax, or more, depending on the model
of your Nohia mobile phone
(5). From your notebook or PDA, double click on the service you wish to use
and it will trigger a dialog box "Connect with ***?“ on your mobile phone
(where *** is the name of your notebook or PD”
(6). Push the ”Accept" button, and enter a paxxtode, e.gr 55 and push the OK
button, (The Nokia hluetooth Passcode is a I to lo character'long numeric code
of your ehnied
(i), A Passkey dialog box will pop up on your notebook or PDA, type in the
same passkey you’ve entered on your mobile.
(8). If pairing was successful, a “Paired with ***' message box will pop up on
your mobile phone. You should also see a lick on the side of the mobile phone
ieon in your notebook or PDA
(9). You are now able to use Ihe services of your mobile phone.
For further Bluetooth functions on your Nokia mobile phone, please refer to Nokia's User's Guide
How to pair with Erieuon Tflgm
(1). On your mobile phone, push the 'Meuu" button, seroll to ”Extras", "YesM
"Bluetooth", "Yes", "Disenverable', 'Yes' to make your Eriesson mobile phone
detectable by other Bluetoolh dCYlttL
(l), ”Diseoverable (or 3 minutes' message box will pop up
(3)4 From your notebook or PDA, begin a Bluelooth device search for your
Eriesson T“.
H). A mobile phone icon will show up in the right pane of the Bluetooth
software window with the name of you Ericsson Nils
6). Double click the mobile phone to discover the services it provides. You
should see Serial Port, Dial-up Networhing, Fax, and more, depending on the
model of your mobile phonh
(6). From your mobile phone, seroll to 'Extrar', lYes“, ”Bluetnoth", "Yesh
"Discover", “Yes"r A list of discovered deviees appearL
U). You can now choose the Blueloolh device you wish to connect to, then
select "Add to paired“, the mobile phone will prompt you for a “Passkey”. Type
in n passkey, Lg. 55 and push 'Yet".
(filo A Posshcy dialog box will pop up on your notebook or PDA, type in the
same passkey you’ve entered on your mobile. A IPairing Succeeded" message box
will pop up,
(9). On your mobile phone, enter a name for your notebook or PDA, or push the
Yes button to accept the default Name lap
(10). if the pairing process is suceesstol, you should see a tick on the side
of the mobile phone icon on your notebook or PDL
Hi). You should now be able to use the services of your mobile phone
For further Bluetooth functions on your Ericsson mobile phone, please refer to Ericsson's User's Guide
How to pair with Ericssou Tbs
(l)< On your mobile phone, scroll to 'Couuect“, 'Yes“, “Bluefooth”, “Yclfi
”Discoveruble", “Yes“ to make your Ericsson mobile phone detectable by other
Bluetooth devices.
(2L "Disooveruble for 3 minutes' message box will pop up.
(3). From your notebook or PDA, begin a Bluetootb device search for you
Ericsson T6&
U). A mobile phone icon will show up in the right pane of the bluetoolh
software window with the name of your Eritsson T6&
6). Double click the mobile phone to discover the services it provides. You
should see Serial Port, Dial-up Neluorling, For, and more, depending on the
model of your mobile phone
(6). From your mobile phone, scroll to 'Gonnect', 'Yes"> "Bluetooth", "Yes",
"Discover", "Yes‘h A list of discovered devices appears.
U). You can now choose the Bluetootb device you wish to connect to, then
select "Add to paired", the mobile phone will prompt you for n "Pusskey". Type
in a pnsskey, e.g. 55 and push "Yesfl
(8). A Passkcy dialog box will pop up on your notebook or PDA, type in tm
same passkey you’ve entered on your mobile. A 'Pniriug Succeeded” messagc box
will pop up.
(er On your mobile phone, enter n none [or your notebook or PDA, or push the
Yes button to accept the default Name tag
(10). If the pairing process is successful, you should see a lick on the side
of the mobile phone icon on your notebnol or PDL
Hi). You should now be able to use the services of your mobile pbunL
For further Bluctooth functions on your Ericsson mobile phone, please refer to
Ericsson’s User’s Guide
How to sync with Ericssou TGfl via XTNDGonnecIPC
(A) Assign COM port
(1) After you have installed Microsoft Outlook and XTNDConnectPChRZAOLEnglish, you would
need to install a new modem to communicate with your mobile phone.
(2) Go into Start->Settings~>Control Panel->Phone and Modem Options, under “Modems" tab
click on "Add" , tick the "Do not detect my modem, I will choose from list" and click
“Next" .
(3) Choose Ericsson and Ericsson TGS Bluctooth (TM) Modem, then click “Next" ,
Add Hartlwa re Wiza r l]
Install New Modem
Soloct the manulactuiei and model at your modem If you! modem is not listed. oi il you
haveoon installation disk, click Have Disk.
Monulaoluioi Medals
VthVtan aid Modemly‘ooislv W 7
E"Fm" Eiicsson TSB Cable Modem
W'dcc'm’" Eiicsson Tee m Modem Vasion. 1,239.1 [3/23/2001
7 i
C) (4) Selelct and assign a COM port (e.g COMlO) w the newly added Modem. Click "Next" .
Install New Modem
Select Iha poit[s] you want to install the modem on.
You have selected lhe following nudem:
Eiicsson TSG Bluetouth [TM] Modem
On which portsdo you wan! to inslal i’?
F Allpo'lls
G §olectnd poits
l’hune and Modem Options
Dialing HE}; Madems Advanéed]
% The iollowing madam are installed:
Q Bluetuulh Modem
m Bluetoulh Null Modem
(B) Configure Bluetooth software
(1) Check the COM ports used by the Bluetooth software are correct.
(2) Go to Start->Settings->Control Panel->Bluetooth Configuration, on the "Local Services" tab,
the COM port should be the one you' ve just assigned to your Ericsson phone (e.g. COMIO).
(3) To change the assigned COM port, double click the "Bluetooth Serial Port" and choose the
correct one from the “COM Pom" drop down list.
Bluuluulh Configuralion
[mammal 0 Accessibility l Discnvmy j IriorrnatinnExchange
W, M, , 4 __._,_.
Label—Services i‘EiieniAppiimians 1 Hardware 5 Versionlnio “Winn Aliens
Dnubla click a service name ta set its securiy and stamp pruperties.
Specify the services that this computer will provide ta other Binlooth devices.
‘ VSexvice Name
Information 5
Fax
File Transler
Information E xchange
Dial-Up Networking
Network Access
m ;—
(4) Check the COM port used by "Bluetooth Serial Pen" in the “Client Applications" tab (e.g.
COM/1), remember this COM port (00.
(5) T 0 change the assigned COM port, double click the "Bluetoolh Serial Port" and choose the
correct one from the "COM Pom" drop down list.
' 7, WW“)! l ,9i?99ve'3£_~,I “wivixchanue l
ClienlApnlicalinns Hardware | Versimwfl Nulilicetmns
Set the properties all the Bluetooth applications on this conquer,
Duuhle-click an applicatinn name to edit its properties.
Au! ' ' Encryption EQMsztr
‘ Not eq Nol Rm
File 1 ransfer Not Fleqiied Not Requied
lnlermatinn E xchange Nat Hequied No! new
Dial-Up Networking N at Heqlfied No! “WM
Network Access No! Fl squirted Nol Heqied
Bluetpnlh Serial Port N pt Fleqtied Not Ranked COM 4
Add can Pm 595m
(C) Configure Exicsson' 5 Phone Monitor
(1) Go to SLan->Senings->Control Panel->Phone Monitor Options.
E Cnntmli‘anol
Eile Edlt wow Favorites luals fleln
a i? pSeavch itl‘fiiders .-
"vii
\ w is o- e
Ericsson Folder Options Fonts Game lntarni
Mob“ Mod" Controllers Optlon
Address 9 Control Panel
C) e m. 04
Mouse Network Phone and Phone Mo
Connections Modem m Donor
(2) Enable the COM port you have just assign the Elicsson Bluelooih Modem (eg. COMlO). This
COM port is the one that you want to use to communicate with your phone. Make sure the COM
C) pon used by “Bluetooth Serial Port" in the "Client Applications" iab (eg. COM4) is enabled
as welL Click "OK" when finished
Dhune Monilur Options
Mobile Phonesl SIM Card: CUM Polls iAdvancedl Sou-vi
' You can slop or slat! Fhune Monflu Ivom
! searching Iaicqnnecked phones on specific CUM
' pelt! by Juabling'or gushing Iimn'nlhuhl
CUM Polls:
“E_
COM1 Enabled N a
I Enabled N o
Disabled No
Disabled No
Disabled No
Disabled No
Disabled No
EDM4 Enabled Nu
CDMS Enabled ND
CDMB Disabled No
CEIM'I Disabled Nu
COMB Disabled Nu
COMB Disabled Nu
fiasewe | ervczmve
(D) Configure Ericsson' s Mobile Modem Settings
(1) Go to “Stm->Senings—>Control Panel->Ericsson Mobile Modem Settings" , “Modem
Settings" tab and make sure the “Modem" dropdown list has the correct madam highlighted
Frin‘ssnn Muhilc Mu dam Settings
Modem Selling; I
Nule that those telling: do NOT allecl the GPHS
cannucliun,
Sailings for Ericsson TSS Blueloolh ll‘Ml Modem —
Erelerled connection speed: [GEM Data]
. 15.4 '. 2&3; kw:
Bearer sewice type:
QJAnalogue O [S D N Quiet!
, 7,7‘, ,— _|
"MN mun)”
(E) Configure Eticsson' s X'I'NDConnectPC
(I) Go to Start->Pr0gra.ms~>XTNDCOnnectPC->Synchronize Ericsson Phone with Outlook.
3] XTNDCnnneu DC
-->
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : No
Modify Date : 2003:01:02 14:19:17+01:00
Create Date : 2003:01:02 13:56:20+01:00
Creator : Acrobat 4.05 Scan Plug-in for Windows
Producer : Acrobat 4.05 Scan Plug-in for Windows
Page Count : 70
Page Mode : UseThumbs
EXIF Metadata provided by EXIF.tools