Billionton Systems GCKBTBO Bluetooth Handsfree Car Kit User Manual
Billionton Systems, Inc. Bluetooth Handsfree Car Kit
Users Manual
Bluetooth Car kit (GCKBTBO)
Quick Start Guide
Product Parts
1. Talk button
2. Stop button
3. Volume up button
4. Volume down button
5. OLED Display
6. Power ON/OFF
1
2
3
4
6
5
2
Man Machine Interface
1. Switch Power Function
Switch Power Action Function
Power ON Switch Up System Power ON
Power OFF Switch Down System Power OFF
2. Button Function
Button Action Function
Volume UP Short Click To increase the volume
Volume Down Short Click To decrease the volume
Press and hold for
longer than 2
seconds
MIC Mute function
Short Click Answer an incoming call
Short Click Voice recognition dial
Short Click To establish an RFCOMM with a paired AG if the
Car kit is in standby mode.
Short Click Audio Transfer from AG to Car kit or from Car kit
to AG
Talk
Press and hold for
longer than 2
seconds
To send “Last Number Redial” request to AG if
RFCOMM is established.
Short Click Enter pairing mode if the Car kit is in standby mode.
Short Click Hang up an active call
Stop
Short Click To Reject the incoming call if the Car kit is an
incoming call
3
2. OLED Display
# Display Icon Function COMMENT
1 Bluetooth Icon Standby mode.
2 Caller ID If exceed 10 digits, display each 3 sec
3 Connection established
4 Connecting As Master Soon disappear if connecting
fail/Success,
5 Ring or SCO connection
established
6 Pairing mode Pairing Success/Timeout, it
disappear
7
Adjusting volume 6 sec display time
3. Sound Indicator
# Action Sound played
1 Connecting As Master is fail 1 beeps.
2 Volume level reaches the max/Min 2 beeps.
3 Press Talk button for 2 seconds 2 beeps. (Do Do).
4 Press Volume Down button for 2 seconds
(MIC Mute) 2 beeps. (Do Do).
5 Ring tone (Out-of-Band Ring) Ascending melodic; (Do-Ra-Mi-Fa-So-La-Si-Do)
4. LED Indicator
# Action Flashing Pattern COMMENT
1 TALK LED Always ON To easily indicate and operate TALK button in
the dark
4
# Action Flashing Pattern COMMENT
2 STOP LED Always ON To easily indicate and operate STOP button in
the dark
Operation
. System Power ON / OFF
Slide Switch to switch power ON/OFF.
. Pair with a cell phone AG
To Enter Pairing mode:
1. Make sure the car kit is in Standby Mode, it means the car kit didn’t connect with any AG
2. Press STOP button of the Car kit to enter pairing mode.
3. Operate the Cell phone AG to perform the pairing process. The PIN code is 0000
The Car kit will go into pairing mode when user press Stop button. User can then operate the Cell phone to
search available Bluetooth device, and the device name will be “GCKBTBO” ,and then do the bonding
process. The fixed PIN code for the HS/HF is 0000..
. Establish a RFCOMM Connection with a Paired AG
1. Make sure the Headset is in Standby Mode.
2. Press the TALK button of the Car kit.
. Answer an incoming voice call
1. The Car kit plays a RING tone whenever there is an incoming call. Press the TALK button will
answer the incoming call.
. Hang up an ongoing voice call
1. The car kit has an active call.
2. Press the STOP button of the Car kit will hang up the call.
5
. Voice recognition Dial
1. Make sure the Car kit has a RFCOMM connection with an AG.
2. Press the TALK button for will activate the voice dial functionality in AG -if it is supported in the cell
phone, and any voice record will be prepared in the cell phone in advance.
3. Speak the name on Car kit.
. Disconnect an established RFCOMM Connection
1. Press the STOP button of the Car kit.
. Adjust the Volume
1. Make sure the Car kit has an RFCOMM connection with an AG (in HandsFree mode) OR there is an
SCO connection with an AG (in Headset mode).
2. Press the Volume UP or Volume Down Button to adjust the volume.
. Audio Transfer from Car kit to AG
1. Make sure the Car kit is on an active call.
2. Press the TALK button of the Car kit.
. Audio Transfer from AG to Car kit
1. Make sure the Cell phone AG is on an active call.
2. Press TALK button of the Car kit.
. Last Number Redial in HF mode
1. Make sure the Headset has an RFCOMM connection with an AG (in HandsFree mode) OR there is
an SCO connection with an AG (in Headset mode).
2. Press and hold the TALK button for 2 seconds will request the Cell phone AG to perform the last
number redial functionality. The feature is only supported in HF mode.
6
. Reject Incoming Call in HF mode
1. The Car kit plays a RING tone whenever there is an incoming call.
2. Press the STOP button of the Car kit will reject the incoming call.
. MIC MUTE
1. Make sure the Car kit is on an active call.
2. Press and hold the V- button for 2 seconds will Mute the microphone, and then press and hold the V-
button for 2 seconds again to no mute the microphone
FCC Caution
1. The device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
FCC statement in User's Manual (for class B)
"Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.