Billionton Systems GCKBTBO Bluetooth Handsfree Car Kit User Manual

Download:
Mirror Download [FCC.gov]
Document ID	698783
Application ID	W61Hpyxjgcpa+cDKy+B7OA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.22kB (77772 bits)
Date Submitted	2006-08-29 00:00:00
Date Available	2006-08-29 00:00:00
Creation Date	2006-02-13 10:39:40
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-08-23 13:18:25
Document Title	untitled

Bluetooth Car kit (GCKBTBO)
Quick Start Guide
Product Parts
1. Talk button
2. Stop button
3. Volume up button
4. Volume down button
5. OLED Display
6. Power ON/OFF
Man Machine Interface
1. Switch Power Function
Switch Power
Action
Function
Power ON
Switch Up
System Power ON
Power OFF
Switch Down
System Power OFF
Button
Action
Function
Volume UP
Short Click
To increase the volume
Volume Down
Short Click
To decrease the volume
2. Button Function
Press and hold for MIC Mute function
longer than 2
seconds
Talk
Short Click
Answer an incoming call
Short Click
Voice recognition dial
Short Click
To establish an RFCOMM with a paired AG if the
Car kit is in standby mode.
Short Click
Audio Transfer from AG to Car kit or from Car kit
to AG
Press and hold for To send “Last Number Redial” request to AG if
longer than 2 RFCOMM is established.
seconds
Stop
Short Click
Enter pairing mode if the Car kit is in standby mode.
Short Click
Hang up an active call
Short Click
To Reject the incoming call if the Car kit is an
incoming call
2. OLED Display
Display Icon
Function
COMMENT
Bluetooth Icon
Standby mode.
Caller ID
If exceed 10 digits, display each 3 sec
Connection established
Connecting As Master
Soon disappear
fail/Success,
if
connecting
Ring or SCO connection
established
Pairing mode
Pairing
disappear
Success/Timeout,
Adjusting volume
6 sec display time
it
3. Sound Indicator
Action
Sound played
Connecting As Master is fail
1 beeps.
Volume level reaches the max/Min
2 beeps.
Press Talk button for 2 seconds
2 beeps. (Do Do).
Press Volume Down button for 2 seconds 2 beeps. (Do Do).
(MIC Mute)
Ring tone (Out-of-Band Ring)
Ascending melodic; (Do-Ra-Mi-Fa-So-La-Si-Do)
4. LED Indicator
Action
Flashing Pattern
COMMENT
TALK LED
Always ON
To easily indicate and operate TALK button in
the dark
#
Action
Flashing Pattern
COMMENT
STOP LED
Always ON
To easily indicate and operate STOP button in
the dark
Operation
. System Power ON / OFF
Slide Switch to switch power ON/OFF.
. Pair with a cell phone AG
To Enter Pairing mode:
1.
Make sure the car kit is in Standby Mode, it means the car kit didn’t connect with any AG
2.
Press STOP button of the Car kit to enter pairing mode.
3.
Operate the Cell phone AG to perform the pairing process. The PIN code is 0000
The Car kit will go into pairing mode when user press Stop button. User can then operate the Cell phone to
search available Bluetooth device, and the device name will be “GCKBTBO” ,and then do the bonding
process. The fixed PIN code for the HS/HF is 0000..
. Establish a RFCOMM Connection with a Paired AG
1.
Make sure the Headset is in Standby Mode.
2.
Press the TALK button of the Car kit.
. Answer an incoming voice call
1.
The Car kit plays a RING tone whenever there is an incoming call. Press the TALK button will
answer the incoming call.
. Hang up an ongoing voice call
1.
The car kit has an active call.
2.
Press the STOP button of the Car kit will hang up the call.
. Voice recognition Dial
1.
Make sure the Car kit has a RFCOMM connection with an AG.
2.
Press the TALK button for will activate the voice dial functionality in AG -if it is supported in the cell
phone, and any voice record will be prepared in the cell phone in advance.
3.
Speak the name on Car kit.
. Disconnect an established RFCOMM Connection
1. Press the STOP button of the Car kit.
. Adjust the Volume
1.
Make sure the Car kit has an RFCOMM connection with an AG (in HandsFree mode) OR there is an
SCO connection with an AG (in Headset mode).
2.
Press the Volume UP or Volume Down Button to adjust the volume.
. Audio Transfer from Car kit to AG
1.
Make sure the Car kit is on an active call.
2.
Press the TALK button of the Car kit.
. Audio Transfer from AG to Car kit
1.
Make sure the Cell phone AG is on an active call.
2.
Press TALK button of the Car kit.
. Last Number Redial in HF mode
1.
Make sure the Headset has an RFCOMM connection with an AG (in HandsFree mode) OR there is
an SCO connection with an AG (in Headset mode).
2.
Press and hold the TALK button for 2 seconds will request the Cell phone AG to perform the last
number redial functionality. The feature is only supported in HF mode.
. Reject Incoming Call in HF mode
1.
The Car kit plays a RING tone whenever there is an incoming call.
2.
Press the STOP button of the Car kit will reject the incoming call.
. MIC MUTE
1.
Make sure the Car kit is on an active call.
2. Press and hold the V- button for 2 seconds will Mute the microphone, and then press and hold the Vbutton for 2 seconds again to no mute the microphone
FCC Caution
1.
The device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2.
This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
3.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
FCC statement in User's Manual (for class B)
"Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9877ae41-5cba-4d7f-af83-898dc77bedd4
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2006:02:13 10:39:40+08:00
Modify Date                     : 2006:08:23 13:18:25+08:00
Metadata Date                   : 2006:08:23 13:18:25+08:00
Document ID                     : uuid:1fb147e9-aabc-4e5a-b02d-0bedec562abe
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools