Billionton Systems MHSBTC Bluetooth Stereo Headset User Manual MHSBTC

Billionton Systems, Inc. Bluetooth Stereo Headset MHSBTC

Users Manual

MHSBTC BILLIONTON SYSTEMS INC. No. 21, Sui-Lih Rd, Hsin-Chu, 300, Taiwan.Bluetooth Stereo HeadsetQuick Guide
2 Product shape 1. Play/Pause Press this button to play or pause the music playback. When the headset is in standby mode press this button once to wake the headset up. Volume +/- Press this button up/down to increase or decrease the volume level. 2. Stop Press this button to stop the playing audio track. Press the Play/Pause button again to start from the beginning of the audio track. Forward/Backward Press the forward/backward button once while playing an audio track to play the next or previous one. 3. Power switch Press this button to power on/off the device. 4. Battery compartment Slide the battery cover to insert AAA size batteries. 5. Paring LED indicator Flashes red and blue alternatively when the Bluetooth Stereo Headset is in paring mode. When the pairing process is completed successfully, the paring LED indicator will return to its normal periodic blue flashing. 6. Power LED indicator Illuminates when the Bluetooth Stereo Headset is powered on. Bluetooth Stereo Headset
3 Inserting a battery 1. Slide the battery cover open. 2. Insert the AAA batteries and verify that they are inserted correctly. 3. Side the battery cover closed. . Pairing with Bluetooth device Before using your headset for the first time, you must pair it with a Bluetooth enabled device prior to usage. The “Pairing” process creates a unique wireless link between two devices. Once paired the communications between the paired devices does not need any further authentication or authorization. Please follow the instruction below to pair the headset with a Bluetooth enabled device: 1. Follow the operating instructions that came with your Bluetooth device to initiate the pairing process. 2. Press and hold the “Power Switch” on the headset for 3 seconds until a single blue LED illuminates to power on the headset. 3. After powering on the headset, it enters the pairing mode automatically with the “Pairing LED indicator” blinking red and blue alternatively and waiting to be paired with another Bluetooth device for 60 seconds. 4. Your Bluetooth device will indicate that it has found a headset named “CSR-bc3”, please select it for pairing. 5. Once pairing is successful between the stereo headset and the Bluetooth device, the stereo headset will exit the pairing mode and will be ready to use. ＊Note: The pairing mode for the stereo headset is 60 seconds after powering on. To enter the pairing mode again please reset the headset .
4FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment." FCC Caution "This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter." "Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment."

Navigation menu