Biostar A770L3 Owners Manual A78XB A3S

2014-07-31

: Biostar Biostar-A770L3-Owners-Manual biostar-a770l3-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 49

Download
Open PDF In Browser	View PDF

A770L3 Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5

Before You Start ................................................................................ 1
Package Checklist ............................................................................. 1
Motherboard Features...................................................................... 2
Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5
2.1
2.2
2.3
2.4

Installing Central Processing Unit (CPU)....................................... 5
FAN Headers...................................................................................... 7
Installing System Memory ................................................................ 8
Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 13
3.1
3.2

How to Setup Jumpers .................................................................... 13
Detail Settings.................................................................................. 13

Chapter 4: RAID Functions .................................. 17
4.1
4.2
4.3

Operating System............................................................................ 17
Raid Arrays ...................................................................................... 17
How RAID Works............................................................................. 17

Chapter 5: Useful Help ........................................ 20
5.1
5.2
5.3
5.4
5.5

Driver Installation Note.................................................................. 20
Software............................................................................................ 21
Extra Information............................................................................ 25
AMI BIOS Beep Code....................................................................... 27
Troubleshooting............................................................................... 28

Appendix: SPEC In Other Languages ................... 30
German.................................................................................................................. 30
French .................................................................................................................... 32
Italian..................................................................................................................... 34
Spanish ................................................................................................................... 36
Portuguese ............................................................................................................ 38
Polish...................................................................................................................... 40
Russian ................................................................................................................... 42
Arabic..................................................................................................................... 44
Japanese ................................................................................................................ 46

A770L3

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.

PACKAGE CHECKLIST
HDD Cable X 1 (optional)
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
Serial ATA Power Cable X 1 (optional)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC

CPU

FSB

Chipset

Socket AM3

AMD 64 Architecture enables 32 and 64 bit

AMD Sempron / Athlon II / Phenom II

computing

processors (Maximum Watt: 95W)

Supports Hyper Transport 3.0

Support HyperTransport 3.0
Supports up to 5.2 GT/s Bandwidth
Northbridge: AMD 770
Southbridge: AMD SB710
Low Pin Count Interface

ITE 8721
Super I/O

Provides the most commonly used legacy
Super I/O functionality

H/W Monitor
ITE's "Smart Guardian" function

DDR3 DIMM Slots x 2

Dual Channel Mode DDR3 memory module

Main

Max Memory Capacity 8GB

Supports DDR3 800 / 1066 / 1333

Memory

Each DIMM supports 512MB/

Supports DDR3 1600 (OC)

1GB/2GB/4GB DDR3

Registered DIMM and ECC DIMM is not supported

IDE

Integrated IDE Controller

SATA II

Integrated Serial ATA Controller

LAN

Realtek RTL 8102EL

Sound

ALC662 / VT1708B
PCI Express Gen2 x16 slot

Multi-word DMA, and Ultra DMA 33/66/100/133
modes
Data transfer rates up to 3 Gb/s
SATA Version 2.5 specification compliant
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
5.1 channels audio out
High Definition Audio
x1

Supports PCI-E Gen2 x16 expansion card

PCI Express Gen2 x1 slot

Supports PCI-E Gen2 x1 expansion card

PCI slot

Supports PCI expansion cards

On Board

Floppy Connector

Each connector supports 1 Floppy drive

Connector

IDE Connector

Each connector supports 2 IDE device

SATA Connector

Each connector supports 1 SATA devices

Front Panel Connector

Supports front panel facilities

Front Audio Connector

Supports front panel audio function

Slots

Environment Control initiatives

A770L3
SPEC
S/PDIF Out Connector

Supports digital audio out function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

CMOS Clear Header

Restore CMOS data to factory default

USB Connector

Each connector supports 2 front panel USB ports

Power Connector (24pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

Printer Port Connector

Each connector supports 1 Printer port

PS/2 Keyboard

Connects to PS/2 Keyboard

PS/2 Mouse

Connects to PS/2 Mouse

Back Panel Serial Port

Connects to RS-232 Port

I/O

LAN Port

Connect to RJ-45 ethernet cable

USB Port

Connect to USB devices

Audio Jack

Provide Audio-In/Out and microphone connection

Board Size
Special
Features

182 mm(W) x 305 mm(L)

ATX

RAID 0 / 1 / 10 support
Biostar reserves the right to add or remove support

OS Support Windows XP / Vista / 7

1.4

for any OS with or without notice.

REAR PANEL CONNECTORS

PS/2
Mouse

LAN

Line In/
Surround
Lin e Out
Mic In 1/
Ba ss/ Center

PS/2
Ke yboard

COM1

USBX2

Motherboard Manual

1.5

MOTHERBOARD LAYOUT
JUSBV1

KBMS1

CPU_FAN1

ATXPWR1

DDR3_B1

S oc ket A M3

C OM1

DDR3_A1

ATXPWR 2

IDE1

USB1

RJ45USB1

AU DIO1

AMD
770
JCMOS1

BAT

BIOS

LAN

PEX16_1

PEX1_1
Super I/O

AMD
SB710
PCI1
SYS_FAN1

PCI3
JUSBV2

F_AUD IO1
FDD1
J_PRINT1

Note: ■ represents the 1st pin.
4

F_U SB1 F_U SB2
PAN EL1

SATA4

JSPDIFOUT1

SATA3

SATA1

Codec

SATA2

PCI2

A770L3

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.

A770L3

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

Pin
1
2
3
4

Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)

SYS_FAN1: System Fan Header

Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense

Note:
The CPU_FAN1 and SYS_FAN1 support 4-pin and 3-pin head connector. When
connecting with wires onto connectors, please note that the red wire is the positive and
should be connected to pin#2, and the black wire is Ground and should be connected to
GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

DDR3_B 1

DDR3_A 1

A. DDR3 Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

A770L3

B. Memory Capacity
DIMM Socket
Location

DDR3 Module

DIMMA1

512MB/1GB/2GB/4GB

DIMMB1

512MB/1GB/2GB/4GB

Total Memory Size
Max is 8GB.

C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table..
Dual Channel Status DDR3_A1 DDR3_B1
Disabled

Disabled

Enabled

(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.

IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode
0~4, Bus Master, Multi-word DMA, and Ultra DMA 33/66/100/133 functionality.
40

SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interface,
it satisfies the SATA 2.5 spec and with transfer rate of 3.0Gb/s.

4
1

SATA 1
SATA 2
SATA 3
SATA 4

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

A770L3

ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
12

Assignment

13
14
15
16
17
18
19
20
21
22
23
24

+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

1
2
3
4
5
6
7
8
9
10
11
12

+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

ATXPWR2: ATX Power Source Connector
This connector provides +12V to CPU power circuit.
1

Pin
1
2
3
4

Assignment
+12V
+12V
Ground

Ground

Motherboard Manual

PEX16_1: PCI-Express Gen2 x16 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.

PEX1_1: PCI-Express Gen2 x1 Slot
-

PCI-Express 2.0 compliant.
Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express Gen2 supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.0 architecture.

PEX1 6_1

PEX1 _1

PCI1~PCI3: Peripheral Component Interconnect Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1
PCI2

PCI3

A770L3

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
+ + -

9
1

16
8

+ -

RST

SPK

HLED

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function

Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function

N/A
N/A
Power LED
Power-on button

Motherboard Manual

F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.

Assignment
Left Channel Input
Ground
Ground
Right Channel Input

Pin
1
2
3
4
3

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

F_US B1 F_USB2

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

A770L3

JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB1/RJ45USB1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB1/RJ45USB1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.
1
3

JUSBV1

JUSBV2
1

Pin 1-2 close

Pin 2-3 close

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

Pin 1-2 Close:
Normal Operation (Default).

3
1

Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.
15

Motherboard Manual

J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13

Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5

Pin
14
15
16
17
18
19
20
21
22
23
24
25
26

Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key

A770L3

CHAPTER 4: RAID FUNCTIONS
4.1

OPERATING SYSTEM

Supports Windows XP, Windows Vista, and Windows 7.

4.2

RAID ARRAYS

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.

4.3

HOW RAID WORKS

RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Motherboard Manual

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.

Features and Benefits

Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.

Block 1
Block 2
Block 3

A770L3

RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.

Features and Benefits

Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Motherboard Manual

CHAPTER 5: USEFUL HELP
5.1

DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
20

A770L3

5.2

SOFTWARE

Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you

must provide. Wi thout
this information, you may
not be able to send out
the mail.

This bl ock will show
the i nformation which
would be collected in
the mail .

conditi on
*Describe
of your system.

your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.

Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.

Exi t thi s dialog.

Save these in forma tion to a .txt file

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

A770L3

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS

Show current BIOS information

AMI BIOS

Clear CMOS function
(Only for AWARD BIOS)

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
24

A770L3

5.3

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

Motherboard Manual

BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

A770L3

5.4

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
27

Motherboard Manual

5.5

TROUBLESHOOTING
Probable

There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.

Solution
1.
2.
3.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

A770L3

This page is intentionally left blank.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen

CPU

FSB

Sockel AM3

Die AMD 64-Architektur unterstützt eine 32-Bit- und

AMD Sempron / Athlon II / Phenom II

64-Bit-Datenverarbeitung

Prozessoren (Maximales Watt: 95W)

Unterstützt Hyper Transport 3.0

Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s

Chipsatz

AMD 770
AMD SB710
Umgebungskontrolle,

ITE 8721
Super E/A

Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.

Lüfterdrehzahl-Controller

Low Pin Count-Schnittstelle

"Smart Guardian"-Funktion von ITE
Dual-Kanal DDR3 Speichermodul

DDR3 DIMM-Steckplätze x 2

Unterstützt DDR3 800 / 1066 / 1333

Arbeitsspeich Max. 8GB Arbeitsspeicher
er

Unterstützt DDR3 1600 (OC)

Jeder DIMM unterstützt 512MB/

registrierte DIMMs. ECC DIMMs werden nicht

1GB/2GB/4GB DDR3.

IDE

unterstützt.
Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus

Integrierter IDE-Controller

Unterstützt PIO-Modus 0~4,
Datentransferrate bis zu 3Gb/s
SATA II

Integrierter Serial ATA-Controller

Konform mit der SATA-Spezifikation Version 2.0.
Unterstützt RAID 0,1,10

LAN

10 / 100 Mb/s Auto-Negotiation

Realtek RTL 8102EL

Halb-/ Vollduplex-Funktion
5.1-Kanal-Audioausgabe

Audio-Codec ALC662 / VT1708B

Unterstützt High-Definition Audio

Steckplätze

PCI Steckplatz

PCI Express Gen2 x16 Steckplatz

PCI Express Gen2x1 Steckplatz

A770L3
Spezifikationen

Onboard-Ans
chluss

Diskettenlaufwerkanschluss

Jeder Anschluss unterstützt 1 Diskettenlaufwerke

Druckeranschluss Anschluss

Jeder Anschluss unterstützt 1 Druckeranschluss

IDE-Anschluss

Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss

Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

S/PDIF- Ausgangsanschluss

Unterstützt die digitale Audioausgabefunktion

CPU-Lüfter-Sockel

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

Stromanschluss (24-polig)

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus

Rückseiten-E Serieller Anschluss

LAN-Anschluss

USB-Anschluss

Audioanschluss

Platinengröße 182 mm (B) X 305 mm (L)
OS-Unterstüt
zung

System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse

ATX
Biostar behält sich das Recht vor, ohne Ankündigung

Windows XP / Vista / 7

die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
Socket AM3
UC

Processeurs AMD Sempron / Athlon II /
Phenom II (Watt maximum : 95W)

Bus frontal

L'architecture AMD 64 permet le calcul 32 et 64 bits
Prend en charge Hyper Transport 3.0

Prend en charge Hyper Transport 3.0 jusqu'à
une bande passante de 5.2 GT/s

Chipset

AMD 770
AMD SB710

Super E/S

ITE 8721

Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S

Moniteur de matériel

patrimoniales la plus utilisée.

Contrôleur de vitesse de ventilateur

Interface à faible compte de broches

Fonction "Gardien intelligent" de l'ITE
Module de mémoire DDR3 à mode à double voie

Fentes DDR3 DIMM x 2
Mémoire

Capacité mémoire maximale de 8 Go

principale

Chaque DIMM prend en charge des DDR3 de
512Mo/1Go/2Go/4Go

Prend en charge la DDR3 800 / 1066 / 1333
Prend en charge la DDR3 1600 (OC)
Les DIMM à registres et DIMM avec code correcteurs
d'erreurs ne sont pas prises en charge
Mode principale de Bus Ultra DMA 33 / 66 / 100 /

IDE

Contrôleur IDE intégré

133
Prend en charge le mode PIO 0~4,
Taux de transfert jusqu'à 3 Go/s.

SATA II

Conforme à la spécification SATA Version 2.0

Contrôleur Serail ATA intégré

Prise en charge RAID 0,1,10
LAN

10 / 100 Mb/s négociation automatique

Realtek RTL 8102EL

Half / Full duplex capability
Sortie audio à 5.1 voies

Codec audio ALC662 / VT1708B

Fentes

Prise en charge de l'audio haute définition

Fente PCI

Fente PCI Express Gen2 x16

Fente PCI Express Gen2 x1

A770L3
SPEC

Connecteur
embarqué

Chaque connector prend en charge 1 lecteur de

Connecteur de disquette

Connecteur de Port d'imprimante

Connecteur IDE

Connecteur SATA

Connecteur du panneau avant

Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1

Prend en charge la fonction audio du panneau avant

Connecteur de sortie S/PDIF

Prend en charge la fonction de sortie audio numérique

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

Connecteur d'alimentation

disquette
Chaque connector prend en charge 1 Port
d'imprimante
Chaque connecteur prend en charge 2 périphériques
IDE
Chaque connecteur prend en charge 1 périphérique
SATA

Alimentation électrique du ventilateur UC (avec
fonction de ventilateur intelligent)
Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB de
panneau avant

(24 broches)
Connecteur d'alimentation

(4 broches)

E/S du
panneau
arrière

Dimensions
de la carte

Clavier PS/2

Souris PS/2

Port série

Port LAN

Port USB

Fiche audio

182 mm (l) X 305 mm (H)

Support SE Windows XP / Vista / 7

ATX
Biostar se réserve le droit d'ajouter ou de supprimer
le support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
SPECIFICA

CPU

FSB

Socket AM3

L’architettura AMD 64 abilita la co mputazione 32

Processori AMD Sempron / Athlon II /

e 64 bit

Phenom II (Watt massimo: 95W)

Supporto di Hyper Transport 3.0

Supporto di HyperTransport 3.0 fino a
5.2 GT/s di larghezza di banda

Chipset

AMD 770
AMD SB710
ITE 8721

Super I/O

Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super Monitoraggio hardware
I/O usate più comunemente.

Controller velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Modulo di memoria DDR3 a canale doppio

Memoria

Capacità massima della memoria 8GB

Supporto di DDR3 800 / 1066 / 1333

principale

Ciascun DIMM supporta DDR3

Supporto di DDR3 1600 (OC)

512MB/1GB/2GB/4GB

DIMM registrati e DIMM ECC non sono supportati
Modalità Bus Master Ultra DMA 33 / 66 / 100 /

IDE

133

Controller IDE integrato

Supporto modalità PIO Mode 0-4
Velocità di trasferimento dei dati fino a 3 Gb/s.
SATA II

Controller Serial ATA integrato

Compatibile specifiche SATA Versione 2.0.
Supporto RAID 0,1,10

LAN

Negoziazione automatica 10 / 100 Mb/s
Realtek RTL 8102EL
Capacità Half / Full Duplex

Codec
audio

Uscita audio 5.1 canali
ALC662 / VT1708B
Supporto audio High-Definit ion (HD)
Alloggio PCI

Alloggi

Alloggio PCI Express Gen2 x16 x1
Alloggio PCI Express Gen2x1

A770L3
SPECIFICA
Connettore floppy

Ciascun connettore supporta 1 unità Floppy

Connettore Porta stampante

Ciascun connettore supporta 1 Porta stampante

Connettore IDE

Ciascun connettore supporta 2 unità IDE

Connettore SATA

Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale

Supporta i servizi del pannello frontale

Connettore audio frontale

Supporta la funzione audio pannello frontale

Connettore output SPDIF

Supporta la funzione d’output audio digitale
Alimentazione ventolina CPU (con funzione Smart

Connettori Collettore ventolina CPU

x1
Fan)

su scheda
Collettore ventolina sistema

Collettore cancellaz ione CMOS

Connettore USB

Alimentazione ventolina di sistema

Ciascun connettore supporta 2 porte USB
pannello frontale
Connettore alimentazione

(24 pin)
Connettore alimentazione

(4 pin)

I/O
pannello
posteriore

Dimension
i scheda

Tastiera PS/2

Mouse PS/2

Porta seriale

Porta LAN

Porta USB

Connettore audio

182 mm (larghezza) x 305 mm
ATX
(altezza)
Biostar si riserva il diritto di aggiungere o

Sistemi
operativi
supportati

Windows XP / Vista / 7

rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
Conector AM3
CPU

La arquitectura AMD 64 permite el procesado de 32 y

Procesadores AMD Sempron / Athlon II / 64 bits
Phenom II (Vatio máximo: 95W)

FSB

Soporta las tecnologías Hyper Transport 3.0

Admite HyperTransport 3.0 con un ancho
de banda de hasta 5.2 GT/s

Conjunto de AMD 770
chips

AMD SB710
ITE 8721

Súper E/S

Iniciativas de control de entorno,

Le ofrece las funcionalidades heredadas de Monitor hardware
uso más común Súper E/S.

Controlador de velocidad de ventilador

Interfaz de cuenta Low Pin

Función "Guardia inteligente" de ITE
Módulo de memoria DDR3 de canal Doble

Ranuras DIMM DDR3 x 2
Admite DDR3 de 800 / 1066 / 1333
Memoria

Capacidad máxima de memoria de 8GB

principal

Cada DIMM admite DDR de

Admite DDR3 de 1600 (OC)
No admite DIMM registrados o DIMM compatibles con
512MB/1GB/2GB/4GB
ECC

IDE

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Controlador IDE integrado
Soporte los Modos PIO 0~4,
Tasas de transferencia de hasta 3 Gb/s.

SATA II

Controlador Serial ATA integrado

Compatible con la versión SATA 2.0.
Admite RAID 0,1,10

Red Local

Negociación de 10 / 100 Mb/s
Realtek RTL 8102EL
Funciones Half / Full dúplex

Códecs de
sonido

Ranuras

Salida de sonido de 5.1 canales
ALC662 / VT1708B
Soporte de sonido de Alta Definición
Ranura PCI

Ranura PCI Express Gen2 x16

Ranura PCI express Gen2 x1

A770L3
Especificación
Conector disco flexible

Cada conector soporta 1 unidade de disco flexible

Conector Puerto de impresora

Cada conector soporta 1 Puerto de impresora

Conector IDE

Cada conector soporta 2 dispositivos IDE

Conector SATA

Cada conector soporta 1 dispositivos SATA

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

Conector de salida S/PDIF

Soporta función de salida de sonido digital

Fuente de alimentación de ventilador de CPU (con

Conectores Cabecera de ventilador de CPU
en placa

función Smart Fan)
Cabecera de ventilador de sistema X2
Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

Fuente de alimentación de ventilador de sistema

Cada conector soporta 2 puertos USB frontales

(24 patillas)
Conector de alimentación

(4 patillas)

Panel
trasero de
E/S

Teclado PS/2

Ratón PS/2

Puerto serie

Puerto de red local

Puerto USB

Conector de sonido

Tamaño de
la placa

182 mm. (A) X 305 mm. (H)

Soporte de
sistema
operativo

ATX

Biostar se reserva el derecho de añadir o retirar el
Windows XP / Vista / 7
soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES
Socket AM3
CPU

A arquitectura AMD 64 permite uma computação de 32

Processadores AMD Sempron / Athlon II / e 64 bits
Phenom II (Watt máximo: 95W)

FSB

Suporta as tecnologias Hyper Transport 3.0

Suporta a tecnologia HyperTransport 3.0
com uma largura de banda até 5.2 GT/s

Chipset

AMD 770
AMD SB710
ITE 8721

Iniciativas para controlo do ambiente

Proporciona as funcionalidades mais
Especificaçã
o Super I/O

Monitorização do hardware

utilizadas em termos da especificação
Super I/O.

Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE

Interface LPC (Low Pin Count).
Módulo de memória DDR3 de canal duplo

Ranhuras DIMM DDR3 x 2
Memória

Capacidade máxima de memória: 8GB

principal

Cada módulo DIMM suporta uma

Suporta módulos DDR3 800 / 1066 / 1333
Suporta módulos DDR3 1600 (OC)

memória DDR3 de 512MB/ 1GB/2GB/4GB

Os módulos DIMM registados e os DIMM ECC não são
suportados

IDE

Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Controlador IDE integrado

Suporta o modo PIO 0~4,
Velocidades de transmissão de dados até 3 Gb/s.

SATA II

Controlador Serial ATA integrado

Compatibilidade com a especificação SATA versão 2.0.
Suporta as funções RAID 0,1,10

LAN

Codec de
som

Ranhuras

Auto negociação de 10 / 100 Mb/s
Realtek RTL 8102EL

Capacidade semi/full-duplex
Saída de áudio de 5.1 canais

ALC662 / VT1708B

Suporta a especificação High-Definition Audio

Ranhura PCI

Ranhura PCI Express Gen2 x16

Ranhura PCI Express Gen2 x1

A770L3
ESPECIFICAÇÕES

Conectores
na placa

Conector da unidade de disquetes

Cada conector suporta 1 unidade de disquete

Conector da para impressora

Cada conector suporta 1 Porta para impressora

Conector IDE

Cada conector suporta 2 dispositivos IDE

Conector SATA

Cada conector suporta 1 dispositivo SATA

Conector do painel frontal

Para suporte de várias funções no painel frontal

Conector de áudio frontal

Suporta a função de áudio no painel frontal

Conector de saída S/PDIF

Suporta a saída de áudio digital

Conector da ventoinha da CPU

Alimentação da ventoinha da CPU (com a função Smart
Fan)
Conector da ventoinha do sistema

Conector para limpeza do CMOS

Conector USB

Conector de alimentação

Alimentação da ventoinha do sistema

Cada conector suporta 2 portas USB no painel frontal

(24 pinos)
Conector de alimentação

(4 pinos)
Teclado PS/2

Entradas/S Rato PS/2

aídas no

Porta série

painel

Porta LAN

Porta USB

Tomada de áudio

traseiro

Tamanho
da placa

182 mm (L) X 305 mm (A)

A Biostar reserva-se o direito de adicionar ou remover

Sistemas
operativos
suportados

ATX

Windows XP / Vista / 7

suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC
Architektura AMD 64 umożliwia przetwarzanie

Socket AM3
Procesor

AMD Sempron / Athlon II / Phenom II Procesory 32 i 64 bitowe
Obsługa Hyper Transport 3.0

(Maksymalny Watt: 95W)
FSB

Obsługa HyperTransport 3.0 o szerokości pasma
do 5.2 GT/s

Chipset

AMD 770
AMD SB710
Moduł pamięci DDR3 z trybem podwójnego

Gniazda DDR3 DIMM x 2

kanału

Pamięć

Maks. wielkość pamięci 8GB

główna

Każde gniazdo DIMM obsługuje moduły
512MB/1GB/2GB/4GB DDR3

IDE

Obsługa DDR3 1600 (OC)
Brak obsługi Registered DIMM oraz ECC DIMM
Funkcje kontroli warunków pracy,

ITE 8721
Super I/O

Obsługa DDR3 800 / 1066 / 1333

Zapewnia najbardziej powszechne funkcje Super Monitor H/W
I/O.

Kontroler prędkości wentylatora

Interfejs Low Pin Count

Funkcja ITE "Smart Guardian"
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

Zintegrowany kontroler IDE

obsługa PIO tryb 0~4,
Transfer danych do 3 Gb/s.
SATA II

Zintegrowany kontroler Serial ATA

Zgodność ze specyfikacją SATA w wersji 2.0.
Obsługa RAID 0,1,10
10 / 100 Mb/s z automatyczną negocjacją

LAN

szybkości

Realtek RTL 8102EL

Działanie w trybie połowicznego/pełnego
dupleksu

Kodek
dźwiękowy

Gniazda

5.1 kanałowe wyjście audio

ALC662 / VT1708B

Obsługa High-Definition Audio

Gniazdo PCI

Gniazdo PCI Express Gen2 x16

Gniazdo PCI Express Gen2 x1

A770L3
SPEC

Złącza

Złącze napędu dyskietek

Każde złącze obsługuje 1 napędy dyskietek

Złącze Port drukarki

Każde złącze obsługuje 1 Port drukarki

Złącze IDE

Każde złącze obsługuje 2 urządzenia IDE

Złącze SATA

Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącze wyjścia S/PDIF

Obsługa funkcji cyfrowego wyjścia audio

Złącze główkowe wentylatora

wbudowane procesora

Zasilanie wentylatora procesora (z funkcją Smart
x1

Fan)

Złącze główkowe wentylatora systemowego x2 Zasilanie wentylatora systemowego
Złącze główkowe kasowania
CMOS

Złącze USB

Każde złącze obsługuje 2 porty USB na panelu
przednim

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Back Panel Port szeregowy

I/O

Port LAN

Port USB

Gniazdo audio

Wymiary
płyty

182 mm (S) X 305 mm (W)

Obsluga
systemu
operacyjne
go

ATX

Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7

odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU
(центральн
ый

Гнездо AM3

Архитектура AMD 64 разрешать обработка

Процессоры AMD Sempron / Athlon II /

данных на 32 и 64 бит

процессор) Phenom II (Максимальный ватт: 95W)
FSB

Поддержка Hyper Transport 3.0

Поддержка HyperTransport 3.0 с
пропускной способностью до 5.2 GT/s

Набор

AMD 770

микросхем AMD SB710
Модуль памяти с двухканальным режимом DDR3

Слоты DDR3 DIMM x 2

Поддержка DDR3 800 / 1066 / 1333

Основная

Максимальная ёмкость памяти 8ГБ

память

Каждый модуль DIMM поддерживает

Не поддерживает зарегистрированные модули

512МБ/1ГБ/2ГБ/4ГБ DDR3

Super I/O

Поддержка DDR3 1600 (OC)

DIMM and ECC DIMM

ITE 8721

Инициативы по охране окружающей среды,

Обеспечивает наиболее используемые

Аппаратный монитор

действующие функциональные

Регулятор скорости

возможности Super I/O.

Функция ITE "Smart Guardian"

Интерфейс с низким количеством выводов (Интеллектуальная защита)

IDE

SATA II

Встроенное устройство управления
встроенными интерфейсами устройств

Режим "хозяина" шины Ultra DMA 33 / 66 / 100 /
133
Поддержка режима PIO 0~4,
скорость передачи данных до 3 гигабит/с.
Соответствие спецификации SATA версия 2.0.
Поддержка RAID 0,1,10

Локальная
сеть
Звуковой
кодек

Частичная / полная дуплексная способность
Звуковая поддержка High-Definition

ALC662 / VT1708B
Слот PCI

Слоты

Автоматическое согласование 10 / 100 Мб/с

Realtek RTL 8102EL

5.1канальный звуковой выход
x3

Слот PCI Express Gen2 x16

Слот PCI Express Gen2 x1

A770L3
СПЕЦ
Разъём НГМД

Разъём Порт подключения

Каждый разъём поддерживает 1 накопителя на
гибких магнитных дисках
Каждый разъём поддерживает 1 Порт

принтера

Разъём IDE

Разъём SATA

Каждый разъём поддерживает 1 устройство SATA

Разъём на лицевой панели

Поддержка устройств на лицевой панели

Входной звуковой разъём

Встроенны Разъём вывода для S/PDIF

й разъём

Каждый разъём поддерживает 2 встроенных
интерфейса накопителей

Поддержка звуковых функций на лицевой
панели
Поддержка вывода цифровой звуковой функции
Источник питания для вентилятора центрального

Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы

подключения принтера

процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы

Открытое контактирующее
приспособление CMOS

USB-разъём

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Клавиатура PS/2

Мышь PS/2

панель

Последовательный порт

средств

Порт LAN

USB-порт

Задняя

ввода-выв
ода

панели

лицевой панели

Гнездо для подключения
наушников

Размер

Каждый разъём поддерживает 2 USB-порта на

182 мм (Ш) X 305 мм (В)

x3
ATX
Biostar сохраняет за собой право добавлять или

Поддержка
OS

Windows XP / Vista / 7

удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪AM3‬ﻡﻘﺒﺲ‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬

‫‪AMD Sempron / Athlon II / Phenom II‬ﻡﻌﺎﻟﺠﺎت‬

‫اﻟﻤﺮآﺰﻳﺔ‬

‫و ‪Hyper Transport3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫)و‪: 95‬ﻗﺼ ﻮى واط(‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ‬

‫‪ 5.2 GT/s‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪AMD 770‬‬

‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬

‫‪AMD SB710‬‬

‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻋﺪد‪2‬‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬

‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬

‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬

‫ﺳﻌﺎت ‪ 1600‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ)‪DDR3(OC‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬

‫و‪ /1‬و‪ /2‬و‪ 4‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬

‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪ITE 8721‬‬
‫‪Super I/O‬‬

‫ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬

‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬

‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻡﺘﻜﺎﻡﻞ ‪IDE‬ﻡﺘﺤﻜﻢ‬

‫‪SATA II‬‬

‫ﻡﺘﺤﻜﻢ ‪ Serial ATA‬ﻡﺘﻜﺎﻡﻞ‬

‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬

‫‪Realtek RTL 8102EL‬‬

‫آﻮدﻳﻚ اﻟﺼﻮت‬

‫‪ALC662 / VT1708B‬‬

‫وﺿﻊ رﺋﻴﺴﻲ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪ 2.0.‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪RAID 0,1,10‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫ﻓﺘﺤﺔ ‪PCI‬‬
‫اﻟﻔﺘﺤﺎت‬

‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬

‫ﻋﺪ‪3‬‬

‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x1‬‬

‫ﻋﺪد ‪1‬‬
‫‪44‬‬

‫‪A770L3‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫‪IDE‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺝﻬﺰة‬

‫ﻡﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد‪4‬‬

‫‪SATA‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة‬

‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬

‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬

‫ﻋﺪد ‪1‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬

‫ﻳﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺣﺔ‬

‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪ‪2‬‬

‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺏﺎﺏﻴﺲ(‬

‫ﻋﺪد‪12‬‬

‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬

‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬

‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪3‬‬

‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫‪Windows XP / Vista / 7‬‬

‫ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬

‫ﻋﺪ‪1‬‬
‫ﻋﺪد ‪4‬‬

‫‪ 182‬ﻡﻢ )ﻋﺮض( ‪ 305 X‬ﻡﻢ )ارﺗﻔﺎع(‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫‪ATX‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬

‫‪45‬‬

Motherboard Manual

JAPANESE
仕様
Socket AM3
CPU

AMD 64アーキテクチャでは、32ビットと64ビット計算が

AMD Sempron / Athlon II / Phenom II プロセ 可能です
ッサ (最高のワット: 95W)

FSB

ハイパートランスポート3.0サポートします

5.2 GT/sのバンド幅までハイパートランスポート
3.0をサポートします
AMD 770

チップセット
AMD SB710
DDR3 DIMMスロット x 2

デュアル チャンネルモードDDR3メモリモジュール

最大メモリ容量8GB

DDR3 800 / 1066 / 1333 をサポート

メインメモリ
各DIMMは 512MB/1GB/2GB/4GB DDR3をサ DDR3 1600 をサポート (OC)

Super I/O

IDE

ポート

登録済みDIMMとECC DIMMはサポートされません

ITE 8721

環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O機

H/Wモニター

能を採用しています。

ファン速度コントローラ/ モニター

低ピンカウントインターフェイス

ITEの「スマートガーディアン」機能
Ultra DMA 33 / 66 / 100 / 133バスマスタモード

統合IDEコントローラ
PIO Mode 0~4のサポート、
最高3 Gb/秒のデータ転送速度

SATA II

統合Serial ATAコントローラ

SATAバージョン2.0仕様に準拠。
RAID 0,1,10のサポート

LAN

10 / 100 / 1000 Mb/秒のオートネゴシエーション
Realtek RTL 8102EL
半/全二重機能

サウンド
Codec

スロット

ハイデフィニションオーディオのサポート
ALC662 / VT1708B
5.1 チャンネルオーディオアウト
PCIスロット

PCI Express Gen2 x16スロット

PCI Express Gen2 x1スロット

A770L3
仕様
フロッピーコネクタ

各コネクタは1つのフロッピードライブをサポートします

プリンタポートコネクタ

各コネクタは1つのプリンタポートをサポートします

IDEコネクタ

各コネクタは2つのIDEデバイスをサポートします

SATAコネクタ

各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

オンボードコ S/PDIFアウトコネクタ

デジタルオーディオアウト機能をサポートします

ネクタ

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ

システムファン電源装置

CMOSクリアヘッダ

USBコネクタ

各コネクタは2つのフロントパネルUSBポートをサポート
します
電源コネクタ(24ピン)

電源コネクタ(4ピン)

PS/2キーボード

PS/2マウス

背面パネル

シリアルポート

I/O

LANポート

USBポート

オーディオジャック

ボードサイズ 182 mm (幅) X 305 mm (高さ)

OSサポート Windows XP / Vista / 7

ATX
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。

2010/02/05

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2010:02:05 10:59:18+08:00
Modify Date                     : 2010:02:05 10:59:18+08:00
Page Count                      : 49
Creation Date                   : 2010:02:05 02:59:18Z
Mod Date                        : 2010:02:05 02:59:18Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 97031
Metadata Date                   : 2010:02:05 02:59:18Z
Creator                         : 97031
Title                           : Microsoft Word - A78XB-A3S.doc

EXIF Metadata provided by EXIF.tools

Biostar A770L3 Owners Manual A78XB A3S

Navigation menu

Versions of this User Manual:

Views

Navigation