Biostar A780L3L Owners Manual A78LC M3S_111003

2014-07-31

: Biostar Biostar-A780L3L-Owners-Manual biostar-a780l3l-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 49

Download
Open PDF In Browser	View PDF

A780L3L Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5

Before You Start ................................................................................ 1
Package Checklist ............................................................................. 1
Motherboard Features...................................................................... 2
Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5
2.1
2.2
2.3
2.4

Installing Central Processing Unit (CPU)....................................... 5
FAN Headers...................................................................................... 7
Installing System Memory ................................................................ 8
Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup ................... 13
3.1
3.2

How to Setup Jumpers .................................................................... 13
Detail Settings.................................................................................. 13

Chapter 4: RAID Functions .................................. 18
4.1
4.2
4.3

Operating System............................................................................ 18
Raid Arrays ...................................................................................... 18
How RAID Works............................................................................. 18

Chapter 5: Useful Help ........................................ 21
5.1
5.2
5.3
5.4

Driver Installation Note.................................................................. 21
Software............................................................................................ 22
Extra Information............................................................................ 26
Troubleshooting............................................................................... 28

Appendix: SPEC In Other Languages ................... 30
German.................................................................................................................. 30
French .................................................................................................................... 32
Italian..................................................................................................................... 34
Spanish ................................................................................................................... 36
Portuguese ............................................................................................................ 38
Polish...................................................................................................................... 40
Russian ................................................................................................................... 42
Arabic..................................................................................................................... 44
Japanese ................................................................................................................ 46

A780L3L

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.

PACKAGE CHECKLIST
HDD Cable X 1 (optional)
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
Socket AM3

CPU

AMD 64 Architecture enables 32 and 64 bit

AMD Sempron / Athlon II / Phenom II
processors

Supports Hyper Transport 3.0

(Maximum Watt: 95W)
FSB

Chipset

Support HyperTransport 3.0
Supports up to 3.2 GT/s Bandwidth
AMD RS780L
AMD SB710
Low Pin Count Interface

ITE 8721
Super I/O

Provides the most commonly used legacy
Super I/O functionality

Main

Max Memory Capacity 8GB

Memory

Each DIMM supports 512MB/

Integrated in AMD RS780L Chipset

IDE

Integrated IDE Controller

SATA II

Integrated Serial ATA Controller

LAN

Realtek RTL 8103EL

Sound

ALC662

On Board

Supports DDR3 800 / 1066 / 1333
Registered DIMM and ECC DIMM is not supported
Max Shared Video Memory is 512MB
DVI/HDCP support
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
Data transfer rates up to 3 Gb/s
SATA Version 2.0 specification compliant
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
5.1 channels audio out
High Definition Audio

PCI Express Gen2 x16 slot

Supports PCI-E Gen2 x16 expansion cards

PCI slot

Supports PCI expansion cards

Floppy Connector

Each connector supports 2 Floppy drives

Each connector supports 2 IDE devices

Each connector supports 1 SATA device

Connectors IDE Connector
SATA Connector

H/W Monitor

Dual Channel Mode DDR3 memory module

1GB/2GB/4GB DDR3
Graphics

Environment Control initiatives

ITE's "Smart Guardian" function

DDR3 DIMM Slots x 2

Slots

computing

Front Panel Connector

Supports front panel facilities

Front Audio Connector

Supports front panel audio function

A780L3L
SPEC

Back Panel
I/O

Board Size
Special
Features

S/PDIF out Connector

Supports digital audio out function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

CMOS clear Header

Restore CMOS data to factory default

USB Connector

Each connector supports 2 front panel USB ports

Power Connector (24pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

Printer Port Connector

Each connector supports 1 Printer port

Serial Port Connector

Connects to RS-232 Port

PS/2 Keyboard

Connects to PS/2 Keyboard

PS/2 Mouse

Connects to PS/2 Mouse

DVI port

Connect to DVI-D monitor

VGA port

Connect to D-SUB monitor

LAN port

Connect to RJ-45 Ethernet cable

USB Port

Connect to USB devices

Audio Jack

Provide Audio-In/Out and microphone connection

182 mm(W) x 235 mm(L)
RAID 0 / 1 / 1+0 support
Biostar reserves the right to add or remove support

OS Support Windows XP / Vista / 7

1.4

for any OS With or without notice.

REAR PANEL CONNECTORS

PS/2
Mouse

LAN

Line In/
Surround
Line Out
Mic In 1/
Bass/ Center

PS/2
Keyboard

VGA

DVI-D

USBX2

Motherboard Manual

1.5

MOTHERBOARD LAYOUT
CPU_FAN1

KBMS1

ATXPWR2
VGA1

D DR 3_A1

S o ck et A M3

DVI1

D DR3_ B1

ATXPWR1

USB1

IDE1

RJ45USB1

AMD
RS780L

AUDIO1

B ATTERY

JUSBV1

F_AUDIO1
PEX16_1
BIOS

LAN

PCI1
Super
I/O

JSPDIFOUT1
JCMOS1

PCI2

SATA4

SATA3

F_USB1

FDD1

F_USB2
JUSBV2

Codec
J_COM1

J_PRINT1

Note: ■ represents the 1st pin.

AMD
SB710

PANEL1

SATA1

SATA2

SYS_FAN1

A780L3L

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.

A780L3L

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different due to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header
4
1

Pin
1
2
3
4

Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)

SYS_FAN1: System Fan Header

Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense

3
1

Note:
The CPU_FAN1 supports 4-pin head connector. The SYS_FAN1 supports 3-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

D DR 3_A1
D DR3_ B1

A. Memory Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

A780L3L

B. Memory Capacity
DIMM Socket
Location

DDR3 Module

DDR3_A1

512MB/1GB/2GB/4GB

DDR3_B1

512MB/1GB/2GB/4GB

Total Memory
Size
Max is 8GB.

C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table
Dual Channel Status DDR3_A1 DDR3_B1
Disabled

Disabled

Enabled

(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.

IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4channels SATA interface, it
satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.

SATA4
SATA3
SATA 1 SATA2
1

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

A780L3L

ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

ATXPWR2: ATX Power Source Connector
Connecting this connector provides +12V to CPU power circuit.
2

Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
11

Motherboard Manual

PEX16_1: PCI-Express Gen2 x16 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.

PEX16_1

PCI1~PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

A780L3L

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
+ + -

9
1

+ SPK

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

16
8

RST
HLED

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function
N/A
N/A
Power LED
Power-on button

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
Pin
1
2
3
4
5
6
7
8
9
10

F _ US B 1
F _ US B 2
2

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
NC
Key

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data.lPease carefully follow the procedures to avoid damaging the
motherboard.
1

Pin 1-2 Close:
Normal Operation (default).

1
1

3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.

A780L3L

F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.

Pin
1
2
3

Assignment
+5V
SPDIF_OUT
Ground

Motherboard Manual

J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13

Assignment

Pin
14
15
16
17
18
19
20
21
22
23
24
25
26

-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5

Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key

J_COM1: Serial port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.

Assignment

1
2
3
4
5
6
7
8
9
10

Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC

A780L3L

JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB1/RJ45USB1.
JUSBV2: +5V for USB ports at front panel (F_USB1/F_USB2).
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB1/RJ45USB1.
JUSBV2: +5V STB for USB ports at front panel (F_USB1/F_USB2).

JUS BV1
3

3
1

Pin 1-2 close

1
1

3
1

Pin 2-3 close

JUSB V2

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS
4.1
z

OPERATING SYSTEM

Supports Windows XP , Windows Vista, and Windows 7.

4.2

RAID ARRAYS

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1.

4.3

HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment.
This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits
-

Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files.
No capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

A780L3L

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on
a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if
the active volume or drive is corrupted or becomes unavailable because of a hardware
failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and less
reliable media.

Features and Benefits
-

Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.

Block 1
Block 2
Block 3

Motherboard Manual

RAID 1+0:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0
solution for improved resiliency, performance and rebuild performance.

Features and Benefits
-

Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID
levels in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

A780L3L

CHAPTER 5: USEFUL HELP
5.1

DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
21

Motherboard Manual

5.2

SOFTWARE

Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you

must provide. Wi thout
this information, you may
not be able to send out
the mail.

This bl ock will show
the i nformation which
would be collected in
the mail .

conditi on
*Describe
of your system.

your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.

Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.

Exi t thi s dialog.

Save these in forma tion to a .txt file

A780L3L

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

Motherboard Manual

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS

Show current BIOS information

Clear CMOS function
(Only for AWARD BIOS)

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

AMI BIOS

A780L3L

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
25

Motherboard Manual

5.3

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

A780L3L

BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

Motherboard Manual

5.4

TROUBLESHOOTING
Probable

There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.

Solution
1.
2.
3.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

A780L3L

This page is intentionally left blank.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Sockel AM3
CPU

AMD Sempron / Athlon II / Phenom II
Prozessoren

64-Bit-Datenverarbeitung
Unterstützt Hyper Transport 3.0

(Maximales Watt: 95W)
FSB

Die AMD 64-Architektur unterstützt eine 32-Bit- und

Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 3.2 GT/s

Chipsatz

AMD RS780L
AMD SB710
Low Pin Count-Schnittstelle

ITE8721
Super E/A

Bietet die häufig verwendeten alten Super
E/A-Funktionen.

Umgebungskontrolle,
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE

DDR3 DIMM-Steckplätze x 2

Dual-Kanal DDR3 Speichermodul

Arbeitsspeich Max. 8GB Arbeitsspeicher

Unterstützt DDR3 800 / 1066 / 1333

Jeder DIMM unterstützt 512MB/

registrierte DIMMs. ECC DIMMs werden nicht

1GB/2GB/4GB DDR3.

unterstützt.

Grafik

IDE

SATA

LAN

Max. 512MB gemeinsam benutzter Videospeicher

Integrierter AMD RS780L-Chipsatz

Unterstützt DVI/HDCP
Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus

Integrierter IDE-Controller

Unterstützt PIO-Modus 0~4,
Datentransferrate bis zu 3 Gb/s

Integrierter Serial ATA-Controller

Konform mit der SATA-Spezifikation Version 2.0.
10 / 100 Mb/s Auto-Negotiation

Realtek RTL 8103EL

Halb-/ Vollduplex-Funktion

5.1-Kanal-Audioausgabe

Audio-Unters ALC662

Unterstützt High-Definition Audio

tützung
Steckplätze

PCI Express Gen2 x16 Steckplatz

PCI-Steckplatz

A780L3L
Spezifikationen

Onboard-Ans
chluss

Rückseiten-E
/A

Platinengröß
e
Sonderfunkti
onen
OS-Unterstü
tzung

Diskettenlaufwerkanschluss

Jeder Anschluss unterstützt 2 Diskettenlaufwerke

IDE-Anschluss

Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss

Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

S/PDIF Ausgangsanschluss

Unterstützt die digitale Audioausgabefunktion

CPU-Lüfter-Sockel

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

Stromanschluss (24-polig)

Stromanschluss (4-polig)

Druckeranschluss Anschluss

Serieller Anschluss

PS/2-Tastatur

PS/2-Maus

VGA-Anschluss

LAN-Anschluss

USB-Anschluss

Audioanschluss

DVI-Anschluss

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse

Jeder Anschluss unterstützt 1 Druckeranschluss

182 mm (B) X 235 mm (L)

Unterstützt RAID 0 / 1 / 1+0
Biostar behält sich das Recht vor, ohne Ankündigung
Windows XP / Vista / 7

die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
Sockel AM3
UC

Processeurs AMD Sempron / Athlon II /

L'architecture AMD 64 permet le calcul 32 et 64 bits

Phenom II

Prend en charge Hyper Transport 3.0

(Watt maximum : 95W)
Bus frontal

Chipset

Prend en charge Hyper Transport 3.0
jusqu'à une bande passante de 3.2 GT/s
AMD RS780L
AMD SB710
Interface à faible compte de broches

ITE 8721
Super E/S

Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.

Initiatives de contrôle environnementales,
Moniteur de matériel
Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 2

Module de mémoire DDR3 à mode à double voie

Mémoire

Capacité mémoire maximale de 8 Go

Prend en charge la DDR3 800 / 1066 / 1333

principale

Chaque DIMM prend en charge des DDR3 Les DIMM à registres et DIMM avec code correcteurs
d'erreurs ne sont pas prises en charge

de 512Mo/1Go/2Go/4Go
Graphiques Integré dans la chipset AMD RS780L

IDE

Contrôleur IDE intégré

SATA

Contrôleur Serial ATA intégré

LAN

Prend en charge le mode PIO 0~4,
Taux de transfert jusqu'à 3 Go/s.
Conforme à la spécification SATA Version 2.0
10 / 100 Mb/s négociation automatique

Realtek RTL 8103EL

Half / Full duplex capability
Sortie audio à 5.1 voies

ALC662

Prise en charge de l'audio haute définition

audio HD
Fentes
Connecteur
embarqué

Prise en charge DVI/HDCP
Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133

Prise en
charge

Mémoire vidéo partagée maximale de 512 Mo

Fente PCI Express Gen2 x16

Fente PCI

Connecteur de disquette

Connecteur IDE

Chaque connector prend en charge 2 lecteurs de
disquettes
Chaque connecteur prend en charge 2 périphériques
IDE

A780L3L
SPEC
Connecteur SATA

Connecteur du panneau avant

Connecteur Audio du panneau avant x1
Connecteur de sortie S/PDIF

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

Connecteur d'alimentation

Chaque connecteur prend en charge 1 périphérique
SATA
Prend en charge les équipements du panneau avant
Prend en charge la fonction audio du panneau avant
Prend en charge la fonction de sortie audio numérique
Alimentation électrique du ventilateur UC (avec
fonction de ventilateur intelligent)
Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB de
panneau avant

(24 broches)
Connecteur d'alimentation

(4 broches)
Connecteur de Port d'imprimante

Connecteur de Port série

Clavier PS/2

Souris PS/2

E/S du

Port VGA

panneau

Port LAN

arrière

Port USB

Fiche audio

Port DVI

Chaque connector prend en charge 1 Port
d'imprimante

Dimension
s de la

182 mm (l) X 235 mm (H)

carte
Fonctionnal
ités

Prise en charge RAID 0 / 1 / 1+0

spéciales
Support SE Windows XP / Vista / 7

Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
SPECIFICA
Sockel AM3
CPU

Processori AMD Sempron / Athlon II /

e 64 bit

Phenom II

Supporto di Hyper Transport 3.0

(Watt massimo: 95W)
FSB

Chipset

Supporto di HyperTransport 3.0 fino a
3.2 GT/s di larghezza di banda
AMD RS780L
AMD SB710
Interfaccia LPC (Low Pin Count)

ITE 8721
Super I/O Fornisce le funzionalità legacy Super
I/O usate più comunemente.

Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2
Memoria

Capacità massima della memoria 8GB

principale

Ciascun DIMM supporta DDR3

Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800 / 1066 / 1333
DIMM registrati e DIMM ECC non sono supportati

512MB/1GB/2GB/4GB
Grafica

L’architettura AMD 64 abilita la co mputazione 32

Integrata nel Chipset AMD RS780L

La memoria video condivisa massima è di 512 MB
Supporto DVI/HDCP
Modalità Bus Master Ultra DMA 33 / 66 / 100 /

IDE

Controller IDE integrato

133
Supporto modalità PIO Mode 0-4

SATA

Controller Serial ATA integrato

LAN

Realtek RTL 8103EL

Supporto
audio HD
Alloggi

Velocità di trasferimento dei dati fino a 3 Gb/s.
Compatibile specifiche SATA Versione 2.0.
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
Uscita audio 5.1 canali

ALC662

Supporto audio High-Definit ion (HD)

Alloggio PCI Express Gen2 x16 x1
Alloggio PCI

Connettori Connettore floppy

Ciascun connettore supporta 2 unità Floppy

su scheda Connettore IDE

Ciascun connettore supporta 2 unità IDE

Connettore SATA

Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale

Supporta i servizi del pannello frontale

A780L3L
SPECIFICA
Connettore audio frontale

Supporta la funzione audio pannello frontale

Connettore output S/PDIF

Supporta la funzione d’output audio digitale

Collettore ventolina CPU

Collettore ventolina sistema

Collettore cancellaz ione CMOS

Connettore USB

Connettore alimentazione

Alimentazione ventolina CPU (con funzione Smart
Fan)
Alimentazione ventolina di sistema

Ciascun connettore supporta 2 porte USB
pannello frontale

(24 pin)
Connettore alimentazione

(4 pin)
Connettore Porta stampante

Connettore Porta seriale

Tastiera PS/2

Mouse PS/2

I/O

Porta VGA

pannello

Porta LAN

posteriore Porta USB

Dimension
i scheda

Connettore audio

Porta DVI

Ciascun connettore supporta 1 Porta stampante

182 mm (larghezza) x 235 mm
(altezza)

Caratterist
iche

Supporto RAID 0 / 1 / 1+0

speciali
Sistemi
operativi
supportati

Biostar si riserva il diritto di aggiungere o
Windows XP / Vista / 7

rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
Conector AM3
CPU

La arquitectura AMD 64 permite el procesado de 32 y

Procesadores AMD Sempron / Athlon II /
Phenom II

Soporta las tecnologías Hyper Transport 3.0

(Vatio máximo: 95W)
FSB

Admite HyperTransport 3.0 con un ancho
de banda de hasta 3.2 GT/s

Conjunto

AMD RS780L

de chips

AMD SB710
Interfaz de cuenta Low Pin

ITE 8721
Súper E/S

64 bits

Le ofrece las funcionalidades heredadas
de uso más común Súper E/S.

Iniciativas de control de entorno,
Monitor hardware
Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 2

Módulo de memoria DDR3 de canal Doble

Memoria

Capacidad máxima de memoria de 8GB

Admite DDR3 de 800 / 1066 / 1333

principal

Cada DIMM admite DDR de

No admite DIMM registrados o DIMM compatibles con

512MB/1GB/2GB/4GB

ECC

Integrados en el conjunto de chips AMD

Memoria máxima de vídeo compartida de 512 MB

RS780L

Admite DVI/HDCP

Gráficos

IDE

Controlador IDE integrado

SATA

Controlador ATA Serie Integrado

Red Local

Realtek RTL 8103EL

Soporte de
sonido HD
Ranuras

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2.0.
Negociación de 10 / 100 Mb/s
Funciones Half / Full dúplex
Salida de sonido de 5.1 canales

ALC662

Soporte de sonido Alta Definición

Ranura PCI Express Gen2 x16

Ranura PCI

Conectores Conector disco flexible

Cada conector soporta 2 unidades de disco flexible

en placa

Conector IDE

Cada conector soporta 2 dispositivos IDE

Conector SATA

Cada conector soporta 1 dispositivos SATA

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

A780L3L
Especificación
Conector de salida S/PDIF

Soporta función de salida de sonido digital

Cabecera de ventilador de CPU

Fuente de alimentación de ventilador de CPU (con
función Smart Fan)

Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

Fuente de alimentación de ventilador de sistema

Cada conector soporta 2 puertos USB frontales

(24 patillas)
Conector de alimentación

(4 patillas)
Conector Puerto de impresora

Conector Puerto serie

Teclado PS/2

Ratón PS/2

Panel

Puerto VGA

trasero de

Puerto de red local

E/S

Puerto USB

Conector de sonido

Puerto DVI

Tamaño de
la placa
Funciones
especiales

182 mm. (A) X 235 Mm. (H)

Admite RAID 0 / 1 / 1+0

Soporte de
sistema
operativo

Cada conector soporta 1 Puerto de impresora

Windows XP / Vista / 7

Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES
Sockel AM3
CPU

Processadores AMD Sempron / Athlon II /
Phenom II

Chipset

Especificaç
ão Super
I/O

Suporta a tecnologia HyperTransport 3.0
com uma largura de banda até 3.2 GT/s
AMD RS780L
AMD SB710
ITE 8721

Interface LPC (Low Pin Count).

Proporciona as funcionalidades mais

Iniciativas para controlo do ambiente

utilizadas em termos da especificação

Monitorização do hardware

Super I/O.

Função "Smart Guardian" da ITE

Ranhuras DIMM DDR3 x 2
Capacidade máxima de memória: 8GB
Memória
principal

Cada módulo DIMM suporta uma

Memória de vídeo máxima partilhada: 512 MB

Integrada no chipset AMD RS780L

IDE

Controlador IDE integrado

SATA

Controlador Serial ATA integrado

LAN

Realtek RTL 8103EL

Suporta módulos DDR3 800 / 1066 / 1333

suportados

1GB/2GB/4GB

gráfica

Módulo de memória DDR3 de canal duplo

Os módulos DIMM registados e os DIMM ECC não são

memória DDR3 de 512MB/

Placa

32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0

(Watt máximo: 95W)
FSB

A arquitectura AMD 64 permite uma computação de

Suporta as funções DVI/HDCP
Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,
Velocidades de transmissão de dados até 3 Gb/s.
Compatibilidade com a especificação SATA versão 2.0.
Auto negociação de 10 / 100 Mb/s
Capacidade semi/full-duplex

Suporte
para áudio
de alta

Saída de áudio de 5.1 canais

ALC662

Suporta a especificação High-Definition Audio

definição
Ranhuras

Ranhura PCI Express Gen2 x16

Ranhura PCI

Conectores Conector da unidade de disquetes

Cada conector suporta 2 unidades de disquetes

na placa

Conector IDE

Cada conector suporta 2 dispositivos IDE

Conector SATA

Cada conector suporta 1 dispositivo SATA

Conector do painel frontal

Para suporte de várias funções no painel frontal

A780L3L
ESPECIFICAÇÕES
Conector de áudio frontal

Conector de saída S/PDIF

Conector da ventoinha da CPU

Conector da ventoinha do sistema x1
Conector para limpeza do CMOS

Suporta a função de áudio no painel frontal
Suporta a saída de áudio digital
Alimentação da ventoinha da CPU (com a função
Smart Fan)
Alimentação da ventoinha do sistema

Conector USB

Conector de alimentação

Cada conector suporta 2 portas USB no painel frontal

(24 pinos)
Conector de alimentação

(4 pinos)
Conector da para impressora

Entradas/S
aídas no
painel
traseiro

Tamanho
da placa

Conector da Porta série

Teclado PS/2

Rato PS/2

Porta VGA

Porta LAN

Porta USB

Tomada de áudio

Porta DVI

Cada conector suporta 1 Porta para impressora

182 mm (L) X 235 mm (A)

Característi
cas

Suporta as funções RAID 0 / 1 / 1+0

especiais
Sistemas
operativos
suportados

A Biostar reserva-se o direito de adicionar ou remover
Windows XP / Vista / 7

suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC
Sockel AM3
Procesor

AMD Sempron / Athlon II / Phenom II
Procesory

Chipset

Obsługa HyperTransport 3.0 o szerokości
pasma do 3.2 GT/s
AMD RS780L
AMD SB710
Gniazda DDR3 DIMM x 2

Moduł pamięci DDR3 z trybem podwójnego kanału

Pamięć

Maks. wielkość pamięci 8GB

główna

Każde gniazdo DIMM obsługuje moduły
512MB/1GB/2GB/4GB DDR3

Obsługa DDR3 800 / 1066 / 1333
Brak obsługi Registered DIMM oraz ECC DIMM
Interfejs Low Pin Count

ITE 8721
Super I/O

bitowe
Obsługa Hyper Transport 3.0

(Maksymalny Watt: 95W)
FSB

Architektura AMD 64 umożliwia przetwarzanie 32 i 64

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne

Monitor H/W

funkcje Super I/O.

Funkcja ITE "Smart Guardian"
Maks. wielkość współdzielonej pamięci video wynosi

Grafika

Zintegrowana w chipsecie AMD RS780L

512 MB
Obsługa DVI/HDCP

IDE

Zintegrowany kontroler IDE

SATA

Zintegrowany kontroler Serial ATA

LAN

Realtek RTL 8103EL

Obsługa
audio HD
Gniazda

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsługa PIO tryb 0~4,
Transfer danych do 3 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0.
10 / 100 Mb/s z automatyczną negocjacją szybkości
Działanie w trybie połowicznego/pełnego dupleksu
5.1 kanałowe wyjście audio

ALC662

Obsługa High-Definition Audio

Gniazdo PCI Express Gen2 x16

Gniazdo PCI

Złącza

Złącze napędu dyskietek

Każde złącze obsługuje 2 napędy dyskietek

wbudowan

Złącze IDE

Każde złącze obsługuje 2 urządzenia IDE

Złącze SATA

Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego

Obsługa elementów panela przedniego

A780L3L
SPEC
Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącze wyjścia S/PDIF

Obsługa funkcji cyfrowego wyjścia audio

Złącze główkowe wentylatora procesora
x1
Złącze główkowe wentylatora

Zasilanie wentylatora procesora (z funkcją Smart Fan)

Zasilanie wentylatora systemowego

systemowego x1
Złącze główkowe kasowania CMOS x1

Back Panel
I/O

Wymiary
płyty
Funkcje
specjalne

Złącze USB

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Złącze Port drukarki

Złącze Port szeregowy

Klawiatura PS/2

Mysz PS/2

Port VGA

Port LAN

Port USB

Gniazdo audio

Port DVI

operacyjne
go

przednim

Każde złącze obsługuje 1 Port drukarki

182 mm (S) X 235 mm (W)

Obsługa RAID 0 / 1 / 1+0

Obsluga
systemu

Każde złącze obsługuje 2 porty USB na panelu

Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7

odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU
(централь
ный
процессор
)
FSB
Набор

Гнездо AM3
Процессоры AMD Sempron / Athlon II /
Phenom II

Архитектура AMD 64 разрешать обработка данных
на 32 и 64 бит
Поддержка Hyper Transport 3.0

(Максимальный ватт: 95W)
Поддержка HyperTransport 3.0 с
пропускной способностью до 3.2 GT/s
AMD RS780L

микросхем AMD SB710
Слоты DDR3 DIMM x 2

Модуль памяти с двухканальным режимом DDR3

Основная

Максимальная ёмкость памяти 8ГБ

Поддержка DDR3 800 / 1066 / 1333

память

Каждый модуль DIMM поддерживает

Не поддерживает зарегистрированные модули

512МБ/1ГБ/2ГБ/4ГБ DDR3

DIMM and ECC DIMM
Интерфейс с низким количеством выводов

ITE 8721
Super I/O

Обеспечивает наиболее используемые
действующие функциональные

Функция ITE "Smart Guardian" (Интеллектуальная

возможности Super I/O.

Графика

IDE
SATA
Локальная
сеть

Инициативы по охране окружающей среды,
Аппаратный монитор
защита)

Встроенная в набор микросхем AMD
RS780L

Максимальная совместно используемая видео
память составляет 512 МБ
Поддержка DVI/HDCP

Встроенное устройство управления

Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133

встроенными интерфейсами устройств Поддержка режима PIO 0~4,
Встроенное последовательное

скорость передачи данных до 3 гигабит/с.

устройство управления ATA

Соответствие спецификации SATA версия 2.0.
Автоматическое согласование 10 / 100 Мб/с

Realtek RTL 8103EL

Частичная / полная дуплексная способность

Звуковая
поддержка
жесткого

Звуковая поддержка High-Definition

ALC662

5.1канальный звуковой выход

диска
Слоты
Встроенны
й разъём

Слот PCI Express Gen2 x16

Слот PCI

Разъём НГМД

Разъём IDE

Разъём SATA

Каждый разъём поддерживает 2 накопителя на
гибких магнитных дисках
Каждый разъём поддерживает 2 встроенных
интерфейса накопителей
Каждый разъём поддерживает 1 устройство SATA

A780L3L
СПЕЦ
Разъём на лицевой панели

Поддержка устройств на лицевой панели

Входной звуковой разъём

Поддержка звуковых функций на лицевой панели

Разъём вывода для S/PDIF

Поддержка вывода цифровой звуковой функции

Контактирующее приспособление

Источник питания для вентилятора центрального

вентилятора центрального

процессора (с функцией интеллектуального

процессора

Контактирующее приспособление
вентилятора системы

вентилятора)
Источник питания для вентилятора системы

Открытое контактирующее
приспособление CMOS

USB-разъём

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Разъём Порт подключения

Задняя
панель
средств
ввода-выв
ода

Размер
панели

Каждый разъём поддерживает 2 USB-порта на
лицевой панели

Каждый разъём поддерживает 1 Порт подключения

принтера

Разъём Последовательный порт

Клавиатура PS/2

Мышь PS/2

Порт VGA

Порт LAN

USB-порт

принтера

Гнездо для подключения
наушников

Порт DVI

182 мм (Ш) X 235 мм (В)

Специальн
ые
техническ
ие

Поддержка RAID 0 / 1 / 1+0

характери
стики
Поддержк
а OS

Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7

удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪AM3‬ﻡﻘﺒﺲ‬
‫وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫‪AMD Sempron / Athlon II‬ﻡﻌﺎﻟﺠﺎت‬

‫إﺟﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺑﻴﺔ ﺑﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺑﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬

‫اﻟﻤﺮآﺰیﺔ‬

‫‪Phenom II‬‬

‫و ‪Hyper Transport3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫)و‪: 95‬ﻗﺼ ﻮى واط(‬
‫اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ‪ 3.2 GT/s‬ﺑﺘﺮدد یﺼﻞ إﻟﻰ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬

‫‪AMD RS780L‬‬
‫‪AMD SB710‬‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫‪Super I/O‬‬

‫‪ITE 8721‬‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺡﺎﻟﺔ اﻷﺟﻬﺰة‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬

‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻋﺪد‪2‬‬
‫ﻡﺰدوﺟﺔ اﻟﻘﻨﺎة‪DDR3‬وﺡﺪة ذاآﺮة‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺟﻴﺠﺎ ﺑﺎیﺖ‬
‫ﻡﻴﺠﺎ ﺑﺎیﺖ ‪ /512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫و‪ /1‬و‪ /2‬و‪ 4‬ﺟﻴﺠﺎ ﺑﺎیﺖ‬

‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬

‫‪ AMD RS780L‬ﻡﺪﻡﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬

‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬

‫‪SATA‬‬

‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬

‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻡﻴﺠﺎ ﺑﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫ﻡﻴﺠﺎ ﺑﺎیﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫‪DVI/HDCP‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬

‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﺟﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬

‫‪Realtek RTL 8103EL‬‬

‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬

‫‪ALC662‬‬

‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻡﻦ‬

‫اﻟﺘﻌﺮیﻒ‬

‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد‪2‬‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬

‫اﻟﻠﻮﺡﺔ‬

‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫‪IDE‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺟﻬﺰة‬

‫ﻡﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد‪4‬‬

‫‪SATA‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺡﺪ ﻡﻦ أﺟﻬﺰة‬

‫اﻟﻔﺘﺤﺎت‬

‫‪44‬‬

‫‪A780L3L‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﻡﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺧﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬

‫وﺹﻠﺔ ﻡﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬

‫ﻋﺪد ‪1‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬

‫وﺹﻠﺔ ﻡﺮوﺡﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ اﻟﻨﻈﺎم‬

‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺡﺔ ﻡﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪VGA‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد‪4‬‬

‫ﻡﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪ‪3‬‬

‫ﻡﻨﺎﻓﺬ ‪DVI‬‬

‫ﻋﺪد ‪1‬‬

‫ﺡﺠﻢ اﻟﻠﻮﺡﺔ‬

‫‪ 182‬ﻡﻢ )ﻋﺮض( ‪ 235 X‬ﻡﻢ )ارﺗﻔﺎع(‬

‫ﻡﺰایﺎ ﺥﺎﺹﺔ‬

‫‪RAID 0 / 1 / 1+0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫‪Windows XP / Vista / 7‬‬

‫‪45‬‬

‫ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬

‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺑﺪون إﺥﻄﺎر‪.‬‬

Motherboard Manual

JAPANESE
仕様
Sockel AM3
CPU

FSB

AMD 64アーキテクチャでは、32ビットと64ビット計算が可

AMD Sempron / Athlon II / Phenom II プロセッ 能です
サ

ハイパートランスポート3.0とクールアンドクワイアットを

(最高のワット: 95W)

サポートします

3.2 GT/sのバンド幅までハイパートランスポ
ート3.0をサポートします

チップセッ

AMD RS780L

ト

AMD SB710
DDR3 DIMMスロット x 2
デュアル チャンネルモードDDR3メモリモジュール

メインメモ

最大メモリ容量8GB

リ

各DIMMは 512MB/1GB/2GB/4GB DDR3

DDR3 800 / 1066 / 1333 をサポート
登録済みDIMMとECC DIMMはサポートされません

をサポート
低ピンカウントインターフェイス

ITE 8721
Super I/O

もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。

グラフィッ

最大の共有ビデオメモリは512MBです
DVI/HDCPのサポート

クス
統合IDEコントローラ

SATA

統合シリアルATAコントローラ

LAN

Realtek RTL 8103EL

H/Wモニター
ITEの「スマートガーディアン」機能

AMD RS780Lチップセットに統合

IDE

環境コントロールイニシアチブ、

Ultra DMA 33 / 66 / 100 / 133バスマスタモード
PIO Mode 0~4のサポート、
最高3Gb/秒のデータ転送速度
SATAバージョン2.0仕様に準拠。
10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能

HDオーディ
オのサポー

5.1チャンネルオーディオアウト

ALC662

ハイデフィニションオーディオのサポート

ト
PCI Express Gen2 x16スロット

PCIスロット

オンボード

フロッピーコネクタ

各コネクタは2つのフロッピードライブをサポートします

コネクタ

IDEコネクタ

各コネクタは2つのIDEデバイスをサポートします

SATAコネクタ

各コネクタは1つのSATAデバイスをサポートします

スロット

A780L3L
仕様
フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

S/PDIFアウトコネクタ

デジタルオーディオアウト機能をサポートします

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ

システムファン電源装置

CMOSクリアヘッダ

USBコネクタ

電源コネクタ(24ピン)

電源コネクタ(4ピン)

プリンタポートコネクタ

各コネクタは2つのフロントパネルUSBポートをサポートし
ます

背面パネル
I/O

ボードサイ

シリアルポートコネクタ

PS/2キーボード

PS/2マウス

VGAポート

LANポート

USBポート

オーディオジャック

DVIポート

各コネクタは1つのプリンタポートをサポートします

182 mm (幅) X 235 mm (高さ)

ズ
特殊機能

RAID 0 / 1 / 1+0 のサポート

OSサポート Windows XP / Vista / 7

Biostarは事前のサポートなしにOSサポートを追加または削
除する権利を留保します。

2011/10/03

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2011:10:03 10:41:11+08:00
Modify Date                     : 2011:10:03 10:41:11+08:00
Page Count                      : 49
Creation Date                   : 2011:10:03 02:41:11Z
Mod Date                        : 2011:10:03 02:41:11Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 100031
Metadata Date                   : 2011:10:03 02:41:11Z
Creator                         : 100031
Title                           : Microsoft Word - A78LC-M3S_111003.doc

EXIF Metadata provided by EXIF.tools

Biostar A780L3L Owners Manual A78LC M3S_111003

Navigation menu

Versions of this User Manual:

Views

Navigation