Biostar G31D M7 Owners Manual IG31G M7S_081022

2014-07-31

: Biostar Biostar-G31D-M7-Owners-Manual biostar-g31d-m7-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 47

Download
Open PDF In Browser	View PDF

G31D-M7 Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5

Before You Start ................................................................................ 1
Package Checklist ............................................................................. 1
Motherboard Features...................................................................... 2
Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 5
2.1
2.2
2.3
2.4

Installing Central Processing Unit (CPU)....................................... 5
FAN Headers...................................................................................... 7
Installing System Memory ................................................................ 8
Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 12
3.1
3.2

How to Setup Jumpers .................................................................... 12
Detail Settings.................................................................................. 12

Chapter 4: Useful Help ........................................ 18
4.1
4.2
4.3
4.4
4.5

Driver Installation Note.................................................................. 18
Software............................................................................................ 19
Extra Information............................................................................ 24
AMI BIOS Beep Code....................................................................... 26
Troubleshooting............................................................................... 27

Appendix: SPEC In Other Languages ................... 28
German.................................................................................................................. 28
French .................................................................................................................... 30
Italian..................................................................................................................... 32
Spanish ................................................................................................................... 34
Portuguese ............................................................................................................ 36
Polish...................................................................................................................... 38
Russian ................................................................................................................... 40
Arabic..................................................................................................................... 42
Japanese ................................................................................................................ 44

G31D-M7

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.

1.2

PACKAGE CHECKLIST
IDE Cable X 1
Serial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may be differed by area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
LGA 775
Intel Core2Duo / Pentium Dual-Core /

CPU

Celeron Dual-Core / Celeron 4xx

Technology

(Maximum Watt: 65W)

Chipset

Support 800 / 1066 / 1333 MHz
Intel G31
Intel ICH7
ITE 8712F

Super I/O

Environment Control initiatives,

Provides the most commonly used legacy Hardware Monitor Controller
Super I/O functionality.

Fan Speed Controller

Low Pin Count Interface

ITE's "Smart Guardian" function

DIMM Slots x 2
Main

Each DIMM supports 256MB / 512MB /

Memory

1GB / 2GB DDR2

Graphics

GMA 3100

IDE

Integrated IDE Controller

SATA 2

Integrated Serial ATA Controller

LAN

Realtek RTL 8102EL

Codec

Supports DDR2 800/667

Max Shared Video Memory is 256MB
Ultra DMA 33 / 66 / 100 Bus Master Mode
supports PIO Mode 0~4
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
5.1 channels audio out

ALC662

High Definition Audio

PCI slot

Supports PCI expansion cards

PCI Express x 16 slot

Supports PCI-E x16 expansion cards

On Board

Floppy connector

Each connector supports 2 Floppy drives

Connector

Printer Port Connector

Each connector supports 1 Printer port

Serial port Connector (Optional)

Connects to RS-232 Port

Slots

Dual Channel Mode DDR2 memory module

Registered DIMM and ECC DIMM is not supported

Max Memory Capicity 4GB

Sound

Enhanced Intel SpeedStep® / Intel Architecture-64 /
Extended Memory 64 Technology / Virtualization

processor

FSB

Supports Hyper-Threading / Execute Disable Bit /

G31D-M7
SPEC
IDE Connector

Each connector supports 2 IDE device

SATA Connector

Each connector supports 1 SATA devices

Front Panel Connector

Supports front panel facilities

Front Audio Connector

Supports front panel audio function

CPU Fan header

CPU Fan power supply (with Smart Fan function)

Clear CMOS header

Restore CMOS data to factory default

USB connector

Each connector supports 2 front panel USB ports

Power Connector (24pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

PS/2 Keyboard

Connects to PS/2 Keyboard

PS/2 Mouse

Connects to PS/2 Mouse

Back Panel VGA port

Connect to D-SUB monitor

I/O

LAN port

Connect to RJ-45 ethernet cable

USB Port

Connect to USB devices

Audio Jack

Provide Audio-In/Out and microphone connection

Board Size

170 (W) x 225 (L) mm

OS Support Windows 2000 / XP / VISTA 32/ VISTA 64

1.4

Biostar Reserves the right to add or remove support for
any OS with or without notice

REAR PANEL CONNECTORS

PS/2
Mouse

LAN

Line In/
Surr ound
Line Out
Mic In 1/
Bass/ Center

PS/2
Keyboar d

VGA

USBX2

Since the audio chip supports High Definition Audio Specification, the function of each audio
jack can be defined by software. The input / output function of each audio jack listed above
represents the default setting. However, when connecting external microphone to the audio port,
please use the Line In (blue) and Mic In (Pink) audio jack.

Motherboard Manual

1.5

MOTHERBOARD LAYOUT
JKBMS1

JCFAN1

LGA775

JATXPWR1

CPU1

DDR2_ B 1

DDR2_ A 1

J ATX PWR 2
J VGA 1

Intel
G31

BAT1

JRJ45USB1

IDE 1

JUSB V1

JUSB2

JAUDIO1
JAUDIOF1
PEX16_1

LAN
BIO S

JUSB3

Super
I/O

JCOM2

Intel
ICH7

FDD1
(Optional)

Codec

JPRNT1

JPANEL1
JCMOS1

Note: ■ represents the 1st pin.

S ATA 1

PCI1

SATA2

G31D-M7

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Pin-Cap

Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.

Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.

G31D-M7

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

JCFAN1: CPU Fan Header
4
1
Pin
1
2
3
4

Assignment
Ground
Power
FAN RPM rate sense
Smart Fan Control

Note:
The JCFAN1 supports 4-pin head connector. When connecting with wires onto the
connector, please note that the red wire is the positive and should be connected to pin#2,
and the black wire is Ground and should be connected to GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

DD R2_B1

DD R2_A1

A. DDR2 module

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot so that the notch on the DIMM matches the break
on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

G31D-M7

B. Memory Capacity
DIMM Socket
Location

DDR2 Module

DDR2_A1

256MB/512MB/1GB/2GB

DDR2_B1

256MB/512MB/1GB/2GB

Total Memory
Size
Max is 4GB.

C. Dual Channel Memory Installation
To activate the Dual Channel function of the motherboard, the memory
module must meet the following requirements:
Install memory module of the same density in pairs, shown in the
following table.
Dual Channel Status DDR2_A1 DDR2_B1
Disabled

Disabled

Enabled

(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same(x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.

IDE1: IDE/ATAPI Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100 functionality.
The IDE connector can connect a master and a slave drive, so you can connect
up to two drives.

G31D-M7

PEX16_1: PCI-Express x16 Slot
-

PCI-Express 1.0a compliant.
Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, for an aggregate of 8GB/s totally.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth over the traditional PCI architecture.

PEX16_1

PCI1: Peripheral Component Interconnect Slot
This motherboard is equipped with 1 standard PCI slot. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
++

9
1

16
8
RST

SPK

HLED

Assignment

+5V

N/A

Speaker

HDD LED (+)

HDD LED (-)

Ground

Reset control

Function

Speaker
Connector

Hard drive
LED
Reset button

Assignment

N/A

Power LED (+)

Power LED (-)

Power button

Ground

Function
N/A
N/A
Power LED

Power-on button

G31D-M7

JATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

JATXPWR2: ATX Power Source Connector
By connecting this connector, it will provide +12V to CPU power circuit.
3

Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

Note:
Before power on the system, please make sure that both JATXPWR1 and JATXPWR2
connectors have been plugged-in.
13

Motherboard Manual

JUSB3: Header for USB 2.0 Ports at Front Panel
This motherboard provides 1 USB 2.0 header, which allows user to connect
additional USB cable on the PC front panel, and also can be connected with
internal USB devices, like USB card reader.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

JAUDIOF1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

G31D-M7

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data, please carefully follow the procedures to avoid damaging the
motherboard.
3
1
Pin 1-2 Close:
Normal Operation
(Default).

3
1

3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.

Reset your desired password or clear the CMOS data.

SATA1/SATA2: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 2channels SATA interface, it
satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.
Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

SATA1
SATA2

Motherboard Manual

JUSBV1: Power Source Header for USB Ports
Pin 1-2 Close:
+5V for USB ports at JUSB2/JRJ45USB1.
Pin 2-3 Close:
+5V STB for USB ports at JUSB2/JRJ45USB1.
3
1
Pin 1-2 close

3
1
3
1
Pin 2-3 close

JCOM2: Serial port Connector (Optional)
The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
Key

G31D-M7

JPRNT1: Printer Port Connector
This header allows you to connector printer on the PC.

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13

Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5

Pin
14
15
16
17
18
19
20
21
22
23
24
25
26

Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key

Motherboard Manual

CHAPTER 4: USEFUL HELP
4.1

DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
18

G31D-M7

4.2

SOFTWARE

Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you

must provide. Wi thout
this information, you may
not be able to send out
the mail.

This bl ock will show
the i nformation which
would be collected in
the mail .

conditi on
*Describe
of your system.

your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.

Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.

Exi t thi s dialog.

Save these in forma tion to a .txt file

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

G31D-M7

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS

Show current BIOS information

AMI BIOS

Online Update function

Clear CMOS function

(Only for AMI BIOS)

(Only for AWARD BIOS)

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.
21

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

G31D-M7
(for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure
that the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.

If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.

Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.

The programming procedure may take minutes, please do not make any
operation during the programming process.

After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this manual.
23

Motherboard Manual

4.3

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

G31D-M7

BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

Motherboard Manual

4.4

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

G31D-M7

4.5

TROUBLESHOOTING
Probable

Solution

No power to the system at all
1.
Make sure power cable is
Power light don’t illuminate, fan
securely plugged in.
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on keyboard does
not turn on.
System inoperative. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard drive is spinning.
module snaps into place.
System does not boot from hard disk
1.
Check cable running from disk to
drive, can be booted from optical drive.
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from optical drive.
1.
Back up data and applications
Hard disk can be read and applications
files.
can be used but booting from hard disk 2.
Reformat the hard drive.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
LGA 775
Unterstützt Hyper-Threading / Execute Disable Bit /
Intel Core2Duo / Pentium Dual-Core /
Enhanced Intel SpeedStep® / Intel Architecture-64 /
CPU

Celeron Dual-Core / Celeron 4xx
Extended Memory 64 Technology / Virtualization
Prozessoren
Technology
(Maximales Watt: 65W)

FSB

800 / 1066 / 1333 MHz
Intel G31

Chipsatz
Intel ICH7
ITE 8712F

Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung
Super E/A
E/A-Funktionen.

Lüfterdrehzahl-Controller/-Überwachung

Low Pin Count-Schnittstelle

"Smart Guardian"-Funktion von ITE

DDR2 DIMM-Steckplätze x 2

Dual-Kanal DDR2 Speichermodul

Arbeitsspeich Jeder DIMM unterstützt 256MB / 512MB / Unterstützt DDR2 800/667
er

1GB / 2GB DDR2.

registrierte DIMMs. ECC DIMMs werden nicht

Max. 4GB Arbeitsspeicher

unterstützt.

Grafik

GMA 3100

Max. 256MB gemeinsam benutzter Videospeicher

IDE

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 Bus Master-Modus
Unterstützt PIO-Modus 0~4,
Datentransferrate bis zu 3.0Gb/s
SATA

Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0.
10 / 100 Mb/s Auto-Negotiation

LAN

Realtek RTL 8102EL
Halb-/ Vollduplex-Funktion

HD
Unterstützt High-Definition Audio
Audio-Unters ALC662
5.1-Kanal-Audioausgabe
tützung

G31D-M7
Spezifikationen
Steckplätze

PCI-Steckplatz

PCI Express x16 Steckplatz

Diskettenlaufwerkanschluss

Jeder Anschluss unterstützt 2 Diskettenlaufwerke

Druckeranschluss Anschluss

Jeder Anschluss unterstützt 1 Druckeranschluss

Serieller Anschluss (fakultativ)

IDE-Anschluss

Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss

Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Unterstützt die Fronttafel-Audioanschlussfunktion

Onboard-Ans Front-Audioanschluss
chluss

CPU-Lüfterstromversorgungsanschluss (mit Smart
CPU-Lüfter-Sockel

x1
Fan-Funktion)

"CMOS löschen"-Sockel

USB-Anschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse
Stromanschluss (24-polig)

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus

Rückseiten-E VGA-Anschluss

LAN-Anschluss

USB-Anschluss

Audioanschluss

Platinengröße 170 mm (B) X 225 mm (L)
Biostar behält sich das Recht vor, ohne Ankündigung
OS-Unterstüt
Windows 2000 / XP / VISTA 32/ VISTA 64 die Unterstützung für ein Betriebssystem
zung
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC

LGA 775

Prend en charge les technologies Hyper-Threading /

Processeurs Intel Core2Duo /Pentium

d'exécution de bit de désactivation / Intel SpeedStep®

Dual-Core / Celeron Dual-Core / Celeron

optimisée/ d'architecture Intel 64 / de mémoire

4xx (Watt maximum : 65W)

étendue 64 / de virtualisation

Bus frontal 800 / 1066 / 1333 MHz
Chipset

Super E/S

Intel G31
Intel ICH7
ITE 8712F

Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S

Moniteur de matériel

patrimoniales la plus utilisée.

Contrôleur /moniteur de vitesse de ventilateur

Interface à faible compte de broches

Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 2

Module de mémoire DDR2 à mode à double voie

Mémoire

Chaque DIMM prend en charge des DDR2 Prend en charge la DDR2 800/667

principale

de 256Mo / 512Mo / 1Go / 2Go

Les DIMM à registres et DIMM avec code correcteurs

Capacité mémoire maximale de 4Go

d'erreurs ne sont pas prises en charge

Graphiques GMA 3100

IDE
SATA

LAN

Mémoire vidéo partagée maximale de 256 Mo
Mode principale de Bus Ultra DMA 33 / 66 / 100

Contrôleur IDE intégré

Prend en charge le mode PIO 0~4,
Taux de transfert jusqu'à 3.0Go/s.

Contrôleur Serial ATA intégré

Conforme à la spécification SATA Version 2.0
10 / 100 Mb/s négociation automatique

Realtek RTL 8102EL

Half / Full duplex capability

Prise en
charge

Prise en charge de l'audio haute définition

ALC662

Sortie audio à 5.1 voies

audio HD
Fentes
Connecteur
embarqué

Fente PCI

Fente PCI Express x16

Connecteur de disquette

Connecteur de Port d'imprimante

Port série (optionnel)

Connecteur IDE

Chaque connector prend en charge 2 lecteurs de
disquettes
Chaque connector prend en charge 1 Port d'imprimante

Chaque connecteur prend en charge 2 périphériques
IDE

G31D-M7
SPEC
Chaque connecteur prend en charge 1 périphérique

Connecteur SATA

Connecteur du panneau avant

Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1

Prend en charge la fonction audio du panneau avant

Embase de ventilateur UC

Embase d'effacement CMOS

Connecteur USB

Connecteur d'alimentation

SATA

Alimentation électrique du ventilateur UC (avec fonction
de ventilateur intelligent)

Chaque connecteur prend en charge 2 ports USB de
panneau avant

(24 broches)
Connecteur d'alimentation

(4 broches)

E/S du
panneau
arrière

Dimensions
de la carte

Clavier PS/2

Souris PS/2

Port VGA

Port LAN

Port USB

Fiche audio

170 mm (l) X 225 mm (H)

Support SE Windows 2000 / XP / VISTA 32/ VISTA 64

Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
SPECIFICA
LGA 775

Supporto di Hyper-Threading / Execute Disable

Processore Intel Core2Duo /Pentium
CPU

Dual-Core / Celeron Dual-Core /
Celeron 4xx

Bit / Enhanced Intel SpeedStep® / Architettura
Intel 64 / Tecnologia Extended Memory 64 /
Tecnologia V irtualization

(Watt massimo: 65W)
FSB
Chipset

800 / 1066 / 1333 MHz
Intel G31
Intel ICH7
Funzioni di controllo dell’ambiente:

ITE 8712F
Super I/O

Fornisce le funzionalità legacy Super Monitoraggio hardware
I/O usate più comunemente.

Controller / Monitoraggio velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR2 x 2

Modulo di memoria DDR2 a canale doppio

Memoria

Ciascun DIMM supporta DDR2 256MB

principale

/ 512MB / 1GB / 2GB

Supporto di DDR2 800/667
DIMM registrati e DIMM ECC non sono supportati

Capacità massima della memoria 4GB
Grafica

GMA 3100

IDE

Controller IDE integrato

La memoria video condivisa massima è di 256MB
Modalità Bus Master Ultra DMA 33 / 66 / 100
Supporto modalità PIO Mode 0-4

SATA

Velocità di trasferimento dei dati fino a 3.0Gb/s.

Controller Serial ATA integrato

Compatibile specifiche SATA Versione 2.0.
LAN

Negoziazione automatica 10 / 100 Mb/s

Realtek RTL 8102EL

Capacità Half / Full Duplex
Supporto

Supporto audio High-Definition (HD)

ALC662

Uscita audio 5.1 canali

audio HD
Alloggi

Alloggio PCI

Alloggio PCI Express x16

Connettori Connettore floppy

Ciascun connettore supporta 2 unità Floppy

su scheda Connettore Porta stampante

Ciascun connettore supporta 1 Porta stampante

G31D-M7
SPECIFICA
Porta seriale (faco ltativo)

Connettore IDE

Ciascun connettore supporta 2 unità IDE

Connettore SATA

Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale

Supporta i servizi del pannello frontale

Connettore audio frontale

Supporta la funzione audio pannello frontale

Collettore ventolina CPU

Alimentazione ventolina CPU (con funzione Smart
Fan)

Collettore cancellaz ione CMOS

Connettore USB

Ciascun connettore supporta 2 porte USB
pannello frontale

Connettore alimentazione

(24 pin)
Connettore alimentazione

(4 pin)

I/O
pannello
posteriore

Dimension
i scheda
Sistemi
operativi
supportati

Tastiera PS/2

Mouse PS/2

Porta VGA

Porta LAN

Porta USB

Connettore audio

170 mm (larghezza) x 225 mm
(altezza)
Windows 2000 / XP / VISTA 32/ VISTA
64

Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación

CPU

FSB

LGA 775

Admite Hyper-Threading / Bit de deshabilitación de

Procesador Intel Core2Duo /Pentium

ejecución / Intel SpeedStep® Mejorado / Intel

Dual-Core / Celeron Dual-Core / Celeron

Architecture-64 / Tecnología Extended Memory 64 /

4xx (Vatio máximo: 95W)

Tecnología de virtualización

800 / 1066 / 1333 MHz

Conjunto de Intel G31
chips

Intel ICH7
Iniciativas de control de entorno,

ITE 8712F
Súper E/S

Le ofrece las funcionalidades heredadas de Monitor hardware
uso más común Súper E/S.

Controlador/monitor de velocidad de ventilador

Interfaz de cuenta Low Pin

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 2

Módulo de memoria DDR2 de canal Doble

Memoria

Cada DIMM admite DDR de 256MB /

Admite DDR2 de 800/667

principal

512MB / 1GB / 2GB

No admite DIMM registrados o DIMM compatibles con

Capacidad máxima de memoria de 4GB

ECC

Gráficos

GMA 3100

Memoria máxima de vídeo compartida de 256MB

IDE

Controlador IDE integrado

Modo bus maestro Ultra DMA 33 / 66 / 100
Soporte los Modos PIO 0~4,

SATA

Tasas de transferencia de hasta 3.0 Gb/s.

Controlador ATA Serie Integrado

Compatible con la versión SATA 2.0.
Red Local

Negociación de 10 / 100 Mb/s

Realtek RTL 8102EL

Funciones Half / Full dúplex
Soporte de

Soporte de sonido de Alta Definición

ALC662

Salida de sonido de 5.1 canales

sonido HD
Ranuras

Ranura PCI

Ranura PCI Express x16

Conectores Conector disco flexible

Cada conector soporta 2 unidades de disco flexible

en placa

Conector Puerto de impresora

Cada conector soporta 1 Puerto de impresora

Puerto serie (opcional)

G31D-M7
Especificación
Conector IDE

Cada conector soporta 2 dispositivos IDE

Conector SATA

Cada conector soporta 1 dispositivos SATA

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

Cabecera de ventilador de CPU

Fuente de alimentación de ventilador de CPU (con
función Smart Fan)

Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

Cada conector soporta 2 puertos USB frontales

(24 patillas)
Conector de alimentación

(4 patillas)

Panel
trasero de
E/S

Tamaño de

Teclado PS/2

Ratón PS/2

Puerto VGA

Puerto de red local

Puerto USB

Conector de sonido

170 mm. (A) X 225 Mm. (H)

la placa
Soporte de
sistema

Biostar se reserva el derecho de añadir o retirar el
Windows 2000 / XP / VISTA 32/ VISTA 64

soporte de cualquier SO con o sin aviso previo.

operativo

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES
LGA 775
CPU

Processador Intel Core2Duo /Pentium
Dual-Core / Celeron Dual-Core / Celeron
4xx (Watt máximo: 95W)

FSB
Chipset

o Super I/O

Intel ICH7
Iniciativas para controlo do ambiente

Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.

gráfica

memória DDR2 de 256 MB / 512 MB / 1GB
/ 2GB

GMA 3100

IDE

Controlador IDE integrado

SATA

Controlador Serial ATA integrado

LAN

Realtek RTL 8102EL

Controlador/Monitor da velocidade da ventoinha

Módulo de memória DDR2 de canal duplo

Cada módulo DIMM suporta uma

Capacidade máxima de memória:4 GB
Placa

Monitorização do hardware

Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x 2

principal

Arquitecture -64 / Extended Memory 64 / Virtualization

Intel G31

Interface LPC (Low Pin Count).

Memória

Disable Bit / Enhanced Intel SpeedStep® / Intel

800 / 1066 / 1333 MHz

ITE 8712F
Especificaçã

Suporta as tecnologias Hyper-Threading / Execute

Suporta módulos DDR2 800/667
Os módulos DIMM registados e os DIMM ECC não são
suportados

Memória de vídeo máxima partilhada: 256 MB
Modo Bus master Ultra DMA 33 / 66 / 100
Suporta o modo PIO 0~4,
Velocidades de transmissão de dados até 3.0 Gb/s.
Compatibilidade com a especificação SATA versão 2.0.
Auto negociação de 10 / 100 Mb/s
Capacidade semi/full-duplex

Suporte
para áudio
de alta

Suporta a especificação High-Definition Audio

ALC662

Saída de áudio de 5.1 canais

definição
Ranhuras

Ranhura PCI

Ranhura PCI Express x16

G31D-M7
ESPECIFICAÇÕES
Conector da unidade de disquetes

Cada conector suporta 2 unidades de disquetes

Conector da para impressora

Cada conector suporta 1 Porta para impressora

Porta série (opcional)

Conector IDE

Cada conector suporta 2 dispositivos IDE

Conector SATA

Cada conector suporta 1 dispositivo SATA

Conector do painel frontal

Para suporte de várias funções no painel frontal

Conector de áudio frontal

Suporta a função de áudio no painel frontal

Conectores Conector da ventoinha da CPU
na placa

Conector para limpeza do CMOS

Conector USB

Conector de alimentação

Alimentação da ventoinha da CPU (com a função Smart
Fan)

Cada conector suporta 2 portas USB no painel frontal

(24 pinos)
Conector de alimentação

(4 pinos)
Teclado PS/2

Entradas/S Rato PS/2

aídas no

Porta VGA

painel

Porta LAN

traseiro

Porta USB

Tomada de áudio

Tamanho
da placa
Sistemas
operativos
suportados

170 mm (L) X 225 mm (A)
A Biostar reserva-se o direito de adicionar ou remover
Windows 2000 / XP / VISTA 32/ VISTA 64 suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC

Procesor

FSB
Chipset

LGA 775

Obsługa Hyper-Threading / Execute Disable Bit /

Procesor Intel Core2Duo /Pentium

Enhanced Intel SpeedStep® / Intel Architecture-64 /

Dual-Core / Celeron Dual-Core / Celeron

Extended Memory 64 Technology / Virtualization

4xx (Maksymalny Watt: 95W)

Technology

800 / 1066 / 1333 MHz
Intel G31
Intel ICH7
Gniazda DDR2 DIMM x 2

Pamięć

Każde gniazdo DIMM obsługuje moduły

główna

256MB / 512MB / 1GB / 2GB

Maks. wielkość współdzielonej pamięci video wynosi

GMA 3100

256MB

ITE 8712F
Super I/O

Super I/O.

Kontroler/Monitor prędkości wentylatora

Interfejs Low Pin Count

Funkcja ITE "Smart Guardian"

Zintegrowany kontroler IDE

SATA

Zintegrowany kontroler Serial ATA

LAN

Realtek RTL 8102EL

audio HD
Gniazda
Złącza

Ultra DMA 33 / 66 / 100 Tryb Bus Master
obsługa PIO tryb 0~4,
Transfer danych do 3.0 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0.
10 / 100 Mb/s z automatyczną negocjacją szybkości
Działanie w trybie połowicznego / pełnego dupleksu
Obsługa High-Definition Audio

ALC662

5.1 kanałowe wyjście audio

Gniazdo PCI

Gniazdo PCI Express x16

Złącze napędu dyskietek

Każde złącze obsługuje 2 napędy dyskietek

Każde złącze obsługuje 1 Port drukarki

wbudowane Złącze Port drukarki
Port szeregowy (Dowolny)

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje Monitor H/W

IDE

Obsługa

Obsługa DDR2 800/667
Brak obsługi Registered DIMM oraz ECC DIMM

Maks. wielkość pamięci 4GB
Grafika

Moduł pamięci DDR2 z trybem podwójnego kanału

G31D-M7
SPEC
Złącze IDE

Każde złącze obsługuje 2 urządzenia IDE

Złącze SATA

Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącze główkowe wentylatora
procesora

Zasilanie wentylatora procesora (z funkcją Smart Fan)

Złącze główkowe kasowania CMOS x1
Złącze USB

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Back Panel Port VGA

I/O

Port LAN

Port USB

Gniazdo audio

Wymiary
płyty
Obsluga
systemu
operacyjne
go

Każde złącze obsługuje 2 porty USB na panelu
przednim

170 mm (S) X 225 mm (W)

Biostar zastrzega sobie prawo dodawania lub
Windows 2000 / XP / VISTA 32/ VISTA 64 odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU

Поддержка технологий Hyper-Threading / Execute

LGA 775

(центральн Процессор Intel Core2Duo /Pentium
ый

Dual-Core / Celeron Dual-Core / Celeron

800 / 1066 / 1333 МГц

Набор

Intel G31

Architecture-64 / Extended Memory 64 Technology /
технологии виртуализация

процессор) 4xx (Максимальный ватт: 95W)
FSB

Disable Bit / Enhanced Intel SpeedStep® / Intel

микросхем Intel ICH7

Основная
память

Графика

Слоты DDR2 DIMM x 2

Модуль памяти с двухканальным режимом DDR2

Каждый модуль DIMM поддерживает

Поддержка DDR2 800/667

256 МБ / 512МБ / 1ГБ / 2ГБ DDR2

Не поддерживает зарегистрированные модули

Максимальная ёмкость памяти 4ГБ

DIMM and ECC DIMM
Максимальная совместно используемая видео

GMA 3100

память составляет 256 МБ

ITE 8712F
Обеспечивает наиболее используемые
Super I/O

действующие функциональные

Регулятор скорости вентилятора/ монитор

возможности Super I/O.

Функция ITE "Smart Guardian" (Интеллектуальная

Интерфейс с низким количеством

защита)

выводов
IDE

SATA
Локальная
сеть

Инициативы по охране окружающей среды,
Аппаратный монитор

Встроенное устройство управления

Режим "хозяина" шины Ultra DMA 33 / 66 / 100

встроенными интерфейсами устройств

Поддержка режима PIO 0~4,

Встроенное последовательное

скорость передачи данных до 3.0 гигабит/с.

устройство управления ATA

Соответствие спецификации SATA версия 2.0.
Автоматическое согласование 10 / 100 Мб/с

Realtek RTL 8102EL

Частичная / полная дуплексная способность

Звуковая
поддержка
жесткого

Звуковая поддержка High-Definition

ALC662

5.1канальный звуковой выход

диска
Слоты
Встроенны
й разъём

Слот PCI

Слот PCI Express x16

Разъём НГМД

Разъём Порт подключения
принтера

Каждый разъём поддерживает 1 Порт подключения
x1

Последовательный порт
(опционно)

Каждый разъём поддерживает 2 накопителя на
гибких магнитных дисках

принтера

G31D-M7
СПЕЦ
Каждый разъём поддерживает 2 встроенных

Разъём IDE

Разъём SATA

Каждый разъём поддерживает 1 устройство SATA

Разъём на лицевой панели

Поддержка устройств на лицевой панели

Входной звуковой разъём

интерфейса накопителей

Поддержка звуковых функций на лицевой панели
Источник питания для вентилятора центрального

Контактирующее приспособление

вентилятора центрального процессора процессора (с функцией интеллектуального
вентилятора)

x1
Открытое контактирующее
приспособление CMOS

USB-разъём

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Клавиатура PS/2

Задняя

Мышь PS/2

панель

Порт VGA

средств

Порт LAN

ввода-выв USB-порт

ода

панели
Поддержка
OS

лицевой панели

Гнездо для подключения
наушников

Размер

Каждый разъём поддерживает 2 USB-порта на

170 мм (Ш) X 225 мм (В)
Biostar сохраняет за собой право добавлять или
Windows 2000 / XP / VISTA 32/ VISTA 64 удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪LGA 775‬‬
‫‪Hyper-Threading / Execute Disable Bit /‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Intel Core2Duo /Pentium Dual-Core‬ﻣﻌﺎﻟﺠﺎت‬
‫‪Enhanced Intel SpeedStep® / Intel Architecture-64 /‬‬

‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫‪/ Celeron Dual-Core /‬‬

‫‪Extended Memory 64 Technology / Virtualization‬‬

‫اﻟﻤﺮآﺰیﺔ‬
‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Celeron 4xx‬‬

‫‪Technology‬‬
‫)و‪: 95‬ﻗﺼ ﻮى واط(‬
‫اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ﻣﻴﺠﺎ هﺮﺗﺰ ‪ 800 / 1066 / 1333‬ﺗﺮدد‬
‫‪Intel G31‬‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪Intel ICH7‬‬

‫ﻓﺘﺤﺔ ‪DDR2 DIMM‬‬

‫ﻋﺪد‪2‬‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR2‬وﺣﺪة ذاآﺮة‬

‫ﺳﻌﺔ ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺳﻌﺎت ‪ 800/667‬ﻣﻴﺠﺎ ﺑﺎیﺖ‪DDR2‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬

‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻣﻴﺠﺎ ﺑﺎیﺖ و‪ 2‬ﺑﺎیﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎیﺖ‪256/512‬‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 4‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻣﺎت‬

‫‪GMA 3100‬‬

‫ﻣﻴﺠﺎ ﺑﺎیﺖ‪256‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪ITE 8712F‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫‪Super I/O‬‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬

‫ﻣﻨﻔﺬ ‪IDE‬‬

‫ﻣﺘﻜﺎﻣﻞ‪IDE‬ﻣﺘﺤﻜﻢ‬

‫‪SATA‬‬

‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬

‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.0.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬
‫ﺷﺒﻜﺔ داﺧﻠﻴﺔ‬

‫‪Realtek RTL 8102EL‬‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬

‫دﻋﻢ اﻝﺼﻮت ﻋﺎﻝﻲ‬

‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫‪ALC662‬‬

‫اﻝﺘﻌﺮیﻒ‬

‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫‪42‬‬

‫‪G31D-M7‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد ‪1‬‬

‫اﻟﻔﺘﺤﺎت‬

‫ﻓﺘﺤﺔ ‪ PCI Express x16‬ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ)ﺥﺘﻴﺎریّﺔا(‬

‫ﻋﺪد‪1‬‬

‫ﻣﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫‪IDE‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ اﺙﻨﻴﻦ ﻣﻦ أﺝﻬﺰة‬

‫ﻣﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد ‪4‬‬

‫‪SATA‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة‬

‫اﻝﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫اﻝﻠﻮﺣﺔ‬

‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﻣﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ‬

‫ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‪USB‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس( ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ( ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج‬

‫ﻣﻨﻔﺬ ‪VGA‬‬

‫ﻋﺪد ‪1‬‬

‫اﻝﻠﻮﺣﺔ اﻝﺨﻠﻔﻴﺔ‬

‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪4‬‬

‫ﻣﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪3‬‬

‫ﺣﺠﻢ اﻝﻠﻮﺣﺔ‬

‫‪ 170‬ﻣﻢ )ﻋﺮض( ‪ 225 X‬ﻣﻢ )ارﺗﻔﺎع(‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻝﺘﺸﻐﻴﻞ‬

‫‪Windows 2000 / XP / VISTA 32/ VISTA 64‬‬

‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻝﺔ اﻝﺪﻋﻢ ﻷي ﻥﻈﺎم ﺕﺸﻐﻴﻞ ﺏﺈﺧﻄﺎر أو ﺏﺪون ‪Biostar‬ﺕﺤﺘﻔﻆ‬
‫إﺧﻄﺎر‪.‬‬

‫‪43‬‬

Motherboard Manual

JAPANESE
仕様
LGA 775
Hyper-Threading / Execute Disable Bit / Enhanced Intel
Intel Core2Duo / Pentium Dual-Core /
SpeedStep® / Intel Architecture-64 / Extended
CPU

Celeron Dual-Core / Celeron 4xx
Memory 64 Technology / Virtualization Technologyをサ
processor
ポートします
(最高のワット: 95W)

FSB

800 / 1066 / 1333 MHz
Intel G31

チップセット
Intel ICH7
DDR2 DIMMスロット x 2
デュアル チャンネルモードDDR2メモリモジュール
各DIMMは 256MB / 512MB / 1GB / 2GB
DDR2 800/667をサポート

メインメモリ
DDR2をサポート

登録済みDIMMとECC DIMMはサポートされません
最大メモリ容量4GB
グラフィック
GMA 3100

最大の共有ビデオメモリは256MBです

ITE 8712F

環境コントロールイニシアチブ、

ス

もっとも一般に使用されるレガシーSuper I/O H/Wモニター
Super I/O
機能を採用しています。

ファン速度コントローラ/ モニター

低ピンカウントインターフェイス

ITEの「スマートガーディアン」機能
Ultra DMA 33 / 66 / 100バスマスタモード

IDE

統合IDEコントローラ
PIO Mode 0~4のサポート、
最高3.0 Gb/秒のデータ転送速度

SATA

統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠。
10 / 100 Mb/秒のオートネゴシエーション

LAN

Realtek RTL 8102EL
半/全二重機能

HDオーディ

ハイデフィニションオーディオのサポート
ALC662

オのサポート

5.1 チャンネルオーディオアウト

G31D-M7
仕様
PCIスロット

PCI Express x16スロット

フロッピーコネクタ

各コネクタは2つのフロッピードライブをサポートします

プリンタポートコネクタ

各コネクタは1つのプリンタポートをサポートします

シリアルポート (任意)

IDEコネクタ

各コネクタは2つのIDEデバイスをサポートします

SATAコネクタ

各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

CMOSクリアヘッダ

USBコネクタ

スロット

オンボードコ
ネクタ

各コネクタは2つのフロントパネルUSBポートをサポートし
ます
電源コネクタ(24ピン)

電源コネクタ(4ピン)

PS/2キーボード

PS/2マウス

背面パネル

VGAポート

I/O

LANポート

USBポート

オーディオジャック

ボードサイズ 170 mm (幅) X 225 mm (高さ)
Biostarは事前のサポートなしにOSサポートを追加または削
OSサポート Windows 2000 / XP / VISTA 32/ VISTA 64
除する権利を留保します。

2008/10/22

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2008:10:22 17:45:39+08:00
Modify Date                     : 2008:10:22 17:45:39+08:00
Page Count                      : 47
Creation Date                   : 2008:10:22 09:45:39Z
Mod Date                        : 2008:10:22 09:45:39Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 97031
Metadata Date                   : 2008:10:22 09:45:39Z
Creator                         : 97031
Title                           : Microsoft Word - IG31G-M7S_081022.doc

EXIF Metadata provided by EXIF.tools

Biostar G31D M7 Owners Manual IG31G M7S_081022

Navigation menu

Versions of this User Manual:

Views

Navigation