Biostar H61Mlv2 Owners Manual IH61W MHS_120524

2014-07-31

: Biostar Biostar-H61Mlv2-Owners-Manual biostar-h61mlv2-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 43

Download
Open PDF In Browser	View PDF

H61MLV 2 Setup Ma nua l

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili

Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied

Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5

Before You Start......................................................................................... 1
Package Checklist ..................................................................................... 1
Motherboard Features .............................................................................. 2
Rear Panel Connectors.............................................................................. 3
Motherboard Layout................................................................................. 4

Chapter 2: Hardware Installation .......................... 5
2.1
2.2
2.3
2.4

Installing Central Processing Unit (CPU) ............................................... 5
FAN Headers .............................................................................................. 7
Installing System Memory ........................................................................ 8
Connectors and Slots................................................................................ 10

Chapter 3: Headers & Jumpers Setup .................. 13
3.1
3.2

How to Setup Jumpers............................................................................. 13
Detail Settings .......................................................................................... 13

Chapter 4: Useful Help ........................................ 16
4.1
4.2
4.3
4.4
4.5

Driver Installation Note .......................................................................... 16
Software .................................................................................................... 17
Extra Information .................................................................................... 21
AMI BIOS Beep Code ............................................................................... 22
Troubleshooting ....................................................................................... 23

Appendix: SPEC In Other Languages ................... 24
German .................................................................................................................. 24
French .................................................................................................................... 26
Italian..................................................................................................................... 28
Spanish ................................................................................................................... 30
Portuguese ............................................................................................................ 32
Polish ...................................................................................................................... 34
Russian ................................................................................................................... 36
Arabic..................................................................................................................... 38
Japanese ................................................................................................................ 40

H6 1 M LV 2

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.

PACKAGE CHECKLIST
Serial ATA Cable x2
Rear I/O Panel for ATX Case x1
Installation Guide x1
Fully Setup Driver DVD x1

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
Supports Execute Disable Bit / Enhanced Intel
Socket 1155

CPU

SpeedStep® / Intel Architecture-64 / Extended
Intel Core i7 / i5 / i3 / Pentium / Celeron
Memory 64 Technology / Virtualization Technology /
processor
Hyper Threading

Chipset

Intel H61
IT8772E

Environment Control initiatives

Provides the most commonly used legacy

Hardware Monitor Controller

Super I/O functionality

Fan Speed Controller

Low Pin Count Interface

ITE's "Smart Guardian" function

DDR3 DIMM Slots x 2

Dual Channel Mode DDR3 memory module

Main

Max Memory Capacity 16GB

Supports DDR3 1066 / 1333 / 1600 (depending on

Memory

Each DIMM supports 512MB/

CPU)

1GB/2GB/4GB/8GB DDR3

Registered DIMM and ECC DIMM is not supported

Super I/O

SATA 2

Data transfer rates up to 3.0 Gb/s
Integrated Serial ATA Controller
SATA Version 2.0 specification compliant

LAN

10 / 100 Mb/s auto negotiation
AR8152
Half / Full duplex capability

Sound
Codec

5.1 channels audio out
VT1708S/ VT1705
High Definition Audio
PCI-E Gen3x16 slot

Slots

On Board
Connectors

(depending on CPU)

Supports PCI-E Gen2/3 x16 expansion card

PCI-E Gen2 x1 slot

Supports PCI-E Gen2 x1 expansion card

SATA2 Connector

Each connector supports 1 SATA2 device

Front Panel Connector

Supports front panel facilities

Front Audio Connector

Supports front panel audio function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

Clear CMOS Header

Restore CMOS data to factory default

H6 1 M LV 2
SPEC
USB2.0 Connector

Each connector supports 2 front panel USB2.0 ports

Serial Port Connector

Connects to RS-232 Port

Power Connector (24pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

PS/2 Keyboard

Connects to PS/2 Keyboard

PS/2 Mouse

Connects to PS/2 Mouse

Rear Panel

VGA Port

Connect to D-SUB monitor

I/O

LAN port

Connect to RJ-45 ethernet cable

USB2.0 Port

Connect to USB2.0 devices

Audio Jack

Provide Audio-In/Out and Mic. connection

Board Size

170 (W) x 226 (L) mm

OS Support Windows XP / Vista / 7

Biostar reserves the right to add or remove support
for any OS with or without notice

1.4

REAR PANEL CONNECTORS

NOTE:
z
VGA Output requires an Intel Core family processor with Intel Graphics Technology.
z

Maximum resolution: VGA: 2048 x 1536 @75Hz

Motherboard Manual

1.5

MOTHERBOARD LAYOUT

Note: ■ represents the 1st pin.

H6 1 M LV 2

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Notice:
1.

Remove Pin Cap before installation, and make good preservation for future use.
When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin
legs won’t be damaged.
The motherboard might equip with two different types of pin cap. Please refer
below instruction to remove the pin cap.

Step 1: Pull the socket locking lever out from the socket then raise the
lever and load plate to the fully open position.

Step 2: Remove the Pin Cap.

Motherboard Manual
Step 3: Hold processor with your thumb and index fingers, oriented as
shown. Align the notches with the socket. Lower the processor
straight down without tilting or sliding the processor in the socket.

Step 4: Close the load plate. Pressing down on the load plate, close and
engage the socket lever.

Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.

H6 1 M LV 2

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

Assignment
Ground
+12V
FAN RPM rate sense
Smart Fan Control

Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate sense

Pin
1
2
3

SYS_FAN1: System Fan Header

Note:
The SYS_FAN1 support 3-pin head connectors; the CPU_FAN1 supports 4-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

A. Memory Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

H6 1 M LV 2
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

Note:

If the DIMM does not go in smoothly, do not force it. Pull it all the way out
and try again.

B. Memory Capacity
DIMM Socket
Location

DDR3 Module

DDR3_A1

512MB/1GB/2GB/4GB/8GB

DDR3_B1

512MB/1GB/2GB/4GB/8GB

Total Memory
Size
Max is 16GB.

C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status

DDR3_A1

Disabled

Enabled

DDR3_B1

(O means memory installed; X, not installed.)
The DRAM bus width of the memory module must be the same(x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS

SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

ATXPWR2: ATX Power Source Connector
This connector provides +12V to CPU power circuit.
Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

H6 1 M LV 2

ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

Motherboard Manual

PEX16_1: PCI-Express Gen3 x16 Slot
-

PCI-Express 3.0 compliant.
Maximum theoretical realized bandwidth of 16GB/s simultaneously per
direction, for an aggregate of 32GB/s totally.
PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.

PEX1_2: PCI-Express Gen2 x1 Slot
-

PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
PCI-Express supports a raw bit-rate of 5Gb/s on the data pins.

H6 1 M LV 2

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function
N/A
N/A
Power LED
Power-on button

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel.
Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

H6 1 M LV 2

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

1
3
Pin 1-2 Close:
Normal Operation (default).

1
3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Load Optimal Defaults and save settings in CMOS.

J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
Pin

Assignment

1
2
3
4
5
6
7
8
9
10

Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC

Motherboard Manual

CHAPTER 4: USEFUL HELP
4.1

DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver DVD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver DVD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
DVD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
16

H6 1 M LV 2

4.2

SOFTWARE

Installing Software
1. Insert the Setup DVD to the optical drive. The drivers installation
program would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you

must provide. Wi thout
this information, you may
not be able to send out
the mail.

This bl ock will show
the i nformation which
would be collected in
the mail .

conditi on
*Describe
of your system.

your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.

Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.

Exi t thi s dialog.

Save these in forma tion to a .txt file

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

H6 1 M LV 2

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
Show current BIOS information

Update BIOS
from the Internet

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.

Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.

H6 1 M LV 2

4.3

EXTRA INFORMATION

CPU Overheated
If the system shuts down automatically after system is powered on for
seconds, the phenomenon means the CPU protection function has
been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

Motherboard Manual

4.4

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

H6 1 M LV 2

4.5

TROUBLESHOOTING

Probable
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
1.

Solution
1.
2.
3.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

System does not boot from a hard disk 1.
drive, but can be booted from optical
drive.
2.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

Back up data and applications
files.
2.
Reformat the hard drive.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Unterstützt Execute Disable Bit / Enhanced Intel
Socket 1155
CPU

SpeedStep® / Intel Architecture-64 / Extended
Intel Core i7 / i5 / i3 / Pentium / Celeron
Memory 64 Technology / Virtualization Technology /
Prozessoren
Hyper Threading

Chipsatz

Intel H61
IT8772E

Super E/A

Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.

Lüfterdrehzahl-Controller/-Überwachung

Low Pin Count-Schnittstelle

"Smart Guardian"-Funktion von ITE

DDR3 DIMM-Steckplätze x 2

Dual-Kanal DDR3 Speichermodul

Arbeitsspeich Max. 16GB Arbeitsspeicher

Unterstützt DDR3 1066 / 1333 / 1600

Jeder DIMM unterstützt 512MB/

registrierte DIMMs. ECC DIMMs werden nicht

1GB/2GB/4GB/8GB DDR3.

unterstützt.

SATA 2

Datentransferrate bis zu 3.0Gb/s
Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0

LAN

10 / 100 Mb/s Auto-Negotiation
AR8152
Halb-/ Vollduplex-Funktion

Unterstützt High-Definition Audio

Audio-Unters VT1708S/ VT1705

5.1-Kanal-Audioausgabe

tützung
Steckplätze

PCI-E Gen3 x 16 Steckplatz

(je nach CPU)

PCI-E Gen2 x1-Steckplatz

SATA2-Anschluss

Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

CPU-Lüfter-Sockel

Onboard-Ans
chluss

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)

H6 1 M LV 2
Spezifikationen
System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB2.0-Anschluss

System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB2.0-Anschlüsse

Serieller Anschluss

Stromanschluss (24-polig)

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus

Rückseiten-E VGA-Anschluss

LAN-Anschluss

USB2.0-Anschluss

Audioanschluss

Platinengröße 170 mm (B) X 226 mm (L)
Biostar behält sich das Recht vor, ohne Ankündigung
OS-Unterstüt
zung

Windows XP / Vista / 7

die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
Prend en charge les technologies d'exécution de bit
Socket 1155
UC

de désactivation / Intel SpeedStep® optimisée/
Processeurs Intel Core i7 / i5 / i3 / Pentium /
d'architecture Intel 64 / de mémoire étendue 64 / de
Celeron
virtualisation / Hyper Threading

Chipset

Intel H61
IT8772E

Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S

Moniteur de matériel

patrimoniales la plus utilisée.

Contrôleur /moniteur de vitesse de ventilateur

Interface à faible compte de broches

Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 2

Module de mémoire DDR3 à mode à double voie

Mémoire

Capacité mémoire maximale de 16 Go

Prend en charge la DDR3 1066 / 1333 / 1600

principale

Chaque DIMM prend en charge des DDR3 de Les DIMM à registres et DIMM avec code correcteurs

Super E/S

512Mo/1Go/2Go/4Go/8Go
SATA 2

d'erreurs ne sont pas prises en charge
Taux de transfert jusqu'à 3.0Go/s.

Contrôleur Serial ATA intégré
Conforme à la spécification SATA Version 2.0

LAN

10 / 100 Mb/s négociation automatique
AR8152
Half / Full duplex capability

Prise en
charge

Prise en charge de l'audio haute définition
VT1708S/ VT1705
Sortie audio à 5.1 voies

audio HD
Fentes

Fente PCI-E Gen3 x 16

Fente PCI-E Gen2 x1

Connecteur SATA2

(en fonction du CPU)

Chaque connecteur prend en charge 1 périphérique
SATA2
Connecteur Connecteur du panneau avant
embarqué

Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1

Prend en charge la fonction audio du panneau avant
Alimentation électrique du ventilateur UC (avec

Embase de ventilateur UC

x1
fonction de ventilateur intelligent)

H6 1 M LV 2
SPEC
Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB2.0

Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB2.0
de panneau avant
Port série

Connecteur d'alimentation

(24 broches)
Connecteur d'alimentation

(4 broches)

E/S du
panneau
arrière

Clavier PS/2

Souris PS/2

Port VGA

Port LAN

Port USB2.0

Fiche audio

Dimensions
de la carte

170 mm (l) X 226 mm (H)

Support SE Windows XP / Vista / 7

Biostar se réserve le droit d'ajouter ou de supprimer
le support de SE avec ou sans préavis

Motherboard Manual

ITALIAN
SPECIFICA
Supporto di Execute Disable Bit / Enhanced
Socket 1155
CPU

Intel SpeedStep® / Architettura Intel 64 /
Processore Intel Core i7 / i5 / i3 /
Tecnologia Extended Memory 64 / Tecnologia
Pentium / Celeron
Virtualization / Hyper Threading

Chipset

Intel H61
IT8772E

Super I/O

Memoria
principale

Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super I/O Monitoraggio hardware
usate più comunemente.

Controller / Monitoraggio velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Modulo di memoria DDR3 a canale doppio

Capacità massima della memoria 16GB

Supporto di DDR3 1066 / 1333 / 1600

Ciascun DIMM supporta DDR3

DIMM registrati e DIMM ECC non sono

512MB/1GB/2GB/4GB/8GB

supportati
Velocità di trasferimento dei dati fino a

SATA 2

Controller Serial ATA integrato

3.0Gb/s.
Compatibile specifiche SATA Versione 2.0

LAN

Negoziazione automatica 10 / 100 Mb/s
AR8152
Capacità Half / Full Duplex

Supporto
audio HD

Alloggi

Supporto audio High-Definition (HD)
VT1708S/ VT1705
Uscita audio 5.1 canali
Alloggio PCI-E Gen3 x16

Alloggio PCI Express Gen2 x1

Connettore SATA2

Ciascun connettore supporta 1 unità SATA2

Connettore pannello frontale

Supporta i servizi del pannello frontale

Supporta la funzione audio pannello frontale

Connettori Connettore audio frontale
su scheda

(a seconda del CPU)

Alimentazione ventolina CPU (con funzione
Collettore ventolina CPU

x1
Smart Fan)

Collettore ventolina sistema

Alimentazione ventolina di sistema

H6 1 M LV 2
SPECIFICA
Collettore cancellaz ione CMOS

Connettore USB2.0

Ciascun connettore supporta 2 porte USB2.0
pannello frontale
Porta seriale

Connettore alimentazione

(24 pin)
Connettore alimentazione

(4 pin)
Tastiera PS/2

Mouse PS/2

Porta VGA

posteriore Porta LAN

I/O
pannello

Dimension
i scheda

Porta USB2.0

Connettore audio

170 mm (larghezza) x 226 mm
(altezza)
Biostar si riserva il diritto di aggiungere o

Sistemi
operativi
supportati

Windows XP / Vista / 7

rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
Admite Bit de deshabilitación de ejecución / Intel
Socket 1155
CPU

SpeedStep® Mejorado / Intel Architecture-64 /
Procesador Intel Core i7 / i5 / i3 / Pentium /
Tecnología Extended Memory 64 / Tecnología de
Celeron
virtualización / Hyper Threading

Conjunto de
chips

Intel H61
IT8772E

Iniciativas de control de entorno,

Le ofrece las funcionalidades heredadas de

Monitor hardware

uso más común Súper E/S.

Controlador/monitor de velocidad de ventilador

Interfaz de cuenta Low Pin

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 2

Módulo de memoria DDR3 de canal Doble

Memoria

Capacidad máxima de memoria de 16GB

Admite DDR3 de 1066 / 1333 / 1600

principal

Cada DIMM admite DDR de

No admite DIMM registrados o DIMM compatibles

512MB/1GB/2GB/4GB/8GB

con ECC

Súper E/S

SATA 2

Tasas de transferencia de hasta 3.0 Gb/s.
Controlador ATA Serie Integrado
Compatible con la versión SATA 2.0

Red Local

Negociación de 10 / 100 Mb/s
AR8152
Funciones Half / Full dúplex

Soporte de
sonido HD

Soporte de sonido de Alta Definición
VT1708S/ VT1705
Salida de sonido de 5.1 canales
Ranura PCI-E Gen3 x16

Ranura PCI-E Gen2 x 1

Conector SATA2

Cada conector soporta 1 dispositivos SATA2

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conectores Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

en placa

Fuente de alimentación de ventilador de CPU (con

Ranuras

Cabecera de ventilador de CPU

(dependiendo de la CPU)

función Smart Fan)
Cabecera de ventilador de sistema X1

Fuente de alimentación de ventilador de sistema

H6 1 M LV 2
Especificación
Cabecera de borrado de CMOS

Conector USB2.0

Puerto serie

Conector de alimentación

Cada conector soporta 2 puertos USB2.0 frontales

(24 patillas)
Conector de alimentación

(4 patillas)

Panel
trasero de
E/S

Teclado PS/2

Ratón PS/2

Puerto VGA

Puerto de red local

Puerto USB2.0

Conector de sonido

Tamaño de
la placa

170 mm. (A) X 226 Mm. (H)

Soporte de
sistema
operativo

Biostar se reserva el derecho de añadir o retirar el
Windows XP / Vista / 7
soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES
Suporta as tecnologias Execute Disable Bit /

Socket 1155
CPU

Processador Intel Core i7 / i5 / i3 / Pentium /
Celeron

Chipset

o Super I/O

/ Extended Memory 64 / Virtualization / Hyper
Threading

Intel H61
IT8772E

Especificaçã

Enhanced Intel SpeedStep® / Intel Arquitecture -64

Iniciativas para controlo do ambiente

Proporciona as funcionalidades mais
utilizadas em termos da especificação Super
I/O.

Monitorização do hardware
Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE

Interface LPC (Low Pin Count).
Ranhuras DIMM DDR3 x 2

Módulo de memória DDR3 de canal duplo

Memória

Capacidade máxima de memória: 16 GB

Suporta módulos DDR3 1066 / 1333 / 1600

principal

Cada módulo DIMM suporta uma memória

Os módulos DIMM registados e os DIMM ECC não

DDR3 de 512MB/ 1GB/2GB/4GB/8GB

são suportados
Velocidades de transmissão de dados até 3.0 Gb/s.

SATA 2

Controlador Serial ATA integrado

Compatibilidade com a especificação SATA versão
2.0

LAN

Auto negociação de 10 / 100 Mb/s

AR8152

Capacidade semi/full-duplex

Suporte
para áudio
de alta

Suporta a especificação High-Definition Audio

VT1708S/ VT1705

Saída de áudio de 5.1 canais

definição
Ranhura PCI-E Gen3 x16

Ranhura PCI-E Gen2 x 1

Conector SATA2

Cada conector suporta 1 dispositivo SATA2

Conector do painel frontal

Para suporte de várias funções no painel frontal

Conectores Conector de áudio frontal

Suporta a função de áudio no painel frontal

Ranhuras

na placa
Conector da ventoinha da CPU

(dependendo da CPU)

Alimentação da ventoinha da CPU (com a função
Smart Fan)

H6 1 M LV 2
ESPECIFICAÇÕES
Conector da ventoinha do sistema

Conector para limpeza do CMOS

Conector USB2.0

Porta série

Conector de alimentação

Alimentação da ventoinha do sistema

Cada conector suporta 2 portas USB2.0 no painel
frontal

(24 pinos)
Conector de alimentação

(4 pinos)
Teclado PS/2

Entradas/S Rato PS/2

aídas no

Porta VGA

painel

Porta LAN

traseiro

Porta USB2.0

Tomada de áudio

Tamanho
da placa

170 mm (L) X 226 mm (A)
A Biostar reserva-se o direito de adicionar ou

Sistemas
operativos
suportados

Windows XP / Vista / 7

remover suporte para qualquer sistema operativo
com ou sem aviso prévio.

Motherboard Manual

POLISH
SPEC
Obsługa Execute Disable Bit / Enhanced Intel
Socket 1155
Procesor

SpeedStep® / Intel Architecture-64 / Extended
Procesor Intel Core i7 / i5 / i3 / Pentium /
Memory 64 Technology / Virtualization Technology /
Celeron
Hyper Threading

Chipset

Intel H61
Gniazda DDR3 DIMM x 2
Moduł pamięci DDR3 z trybem podwójnego kanału

Pamięć

Maks. wielkość pamięci 16GB

główna

Każde gniazdo DIMM obsługuje moduły

Obsługa DDR3 1066 / 1333 / 1600
Brak obsługi Registered DIMM oraz ECC DIMM
512MB/1GB/2GB/4GB/8GB DDR3

Super I/O

SATA 2

IT8772E

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje

Monitor H/W

Super I/O.

Kontroler/Monitor prędkości wentylatora

Interfejs Low Pin Count

Funkcja ITE "Smart Guardian"
Transfer danych do 3.0 Gb/s.

Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0

LAN

10 / 100 Mb/s z automatyczną negocjacją szybkości
AR8152
Działanie w trybie połowicznego / pełnego dupleksu

Obsługa
audio HD

Gniazda

Obsługa High-Definition Audio
VT1708S/ VT1705
5.1 kanałowe wyjście audio
Gniazdo PCI-E Gen3 x16

(w zależności od procesora)

Gniazdo PCI-E Gen2 x 1

Złącze SATA2

Każde złącze obsługuje 1 urządzenie SATA2

Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącza
wbudowane

Złącze główkowe wentylatora
procesora

Zasilanie wentylatora procesora (z funkcją Smart
x1

Fan)

Złącze główkowe wentylatora
Zasilanie wentylatora systemowego
systemowego

H6 1 M LV 2
SPEC
Złącze główkowe kasowania CMOS x1
Każde złącze obsługuje 2 porty USB2.0 na panelu
Złącze USB2.0

x2
przednim

Port szeregowy

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Back Panel Port VGA

I/O

Port LAN

Port USB2.0

Gniazdo audio

Wymiary
płyty

170 mm (S) X 226 mm (W)

Obsluga

Biostar zastrzega sobie prawo dodawania lub

systemu
operacyjne
go

Windows XP / Vista / 7

odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU
(центральн
ый

Поддержка технологий Execute Disable Bit /

Socket 1155
Процессор Intel Core i7 / i5 / i3 / Pentium /
Celeron

микросхем

/ Extended Memory 64 Technology / технологии
виртуализация / Hyper Threading

процессор)
Набор

Enhanced Intel SpeedStep® / Intel Architecture-64

Intel H61
Слоты DDR3 DIMM x 2

Модуль памяти с двухканальным режимом DDR3

Основная

Максимальная ёмкость памяти 16 ГБ

Поддержка DDR3 1066 / 1333 / 1600

память

Каждый модуль DIMM поддерживает

Не поддерживает зарегистрированные модули

512МБ/1ГБ/2ГБ/4ГБ/8ГБ DDR3

DIMM and ECC DIMM

Super I/O

IT8772E

Инициативы по охране окружающей среды,

Обеспечивает наиболее используемые

Аппаратный монитор

действующие функциональные

Регулятор скорости вентилятора/ монитор

возможности Super I/O.

Функция ITE "Smart Guardian"

Интерфейс с низким количеством выводов (Интеллектуальная защита)
SATA 2
Локальная
сеть

Встроенное последовательное устройство скорость передачи данных до 3.0 гигабит/с.
управления ATA

Соответствие спецификации SATA версия 2.0
Автоматическое согласование 10 / 100 Мб/с

AR8152

Частичная / полная дуплексная способность

Звуковая
поддержка
жесткого

Звуковая поддержка High-Definition

VT1708S/ VT1705

5.1канальный звуковой выход

диска
Слоты

Слот PCI-E Gen3 x16 @ x16

Слот PCI-E Gen2 x 1

Разъём SATA2

Каждый разъём поддерживает 1 устройство SATA2

Разъём на лицевой панели

Поддержка устройств на лицевой панели

Встроенны Входной звуковой разъём

й разъём
Контактирующее приспособление
вентилятора центрального процессора x1

(в зависимости от процессора)

Поддержка звуковых функций на лицевой
панели
Источник питания для вентилятора центрального
процессора (с функцией интеллектуального
вентилятора)

H6 1 M LV 2
СПЕЦ
Контактирующее приспособление
вентилятора системы

Источник питания для вентилятора системы

Открытое контактирующее
приспособление CMOS

USB2.0-разъём

Последовательный порт

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Клавиатура PS/2

Задняя

Мышь PS/2

панель

Порт VGA

средств

Порт LAN

ввода-выв USB2.0-порт
ода

панели
Поддержка
OS

лицевой панели

Гнездо для подключения
наушников

Размер

Каждый разъём поддерживает 2 USB2.0-порта на

170 мм (Ш) X 226 мм (В)
Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7

удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Socket 1155‬‬
‫‪SpeedStep® / Intel Architecture-64 / Extended‬‬

‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰیﺔ‬

‫‪Intel Core i7 / i5 / i3 / Pentium /‬ﻣﻌﺎﻟﺠﺎت‬
‫‪Memory 64 Technology / Virtualization Technology /‬‬
‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Celeron‬‬
‫‪Hyper Threading‬‬

‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ ‪Intel H61‬‬

‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬

‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫‪1066 / 1366 /‬‬

‫ﺳ ﻌﺎت ‪ DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬

‫ﻋﺪد‪2‬‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬

‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﺑﺎی ﺖ ﻣﻴﺠ ﺎ ‪1600‬‬

‫ﻣﻴﺠﺎ ﺑﺎیﺖ و‪ /512 /1‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬

‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬

‫و‪ /2‬و‪ /4‬و‪ 8‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪IT8772E‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬

‫‪ Super I/O‬اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.0.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬

‫‪ SATA 2‬ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬

‫‪ 2.0‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ ‪AR8152‬‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬

‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬
‫اﻟﺘﻌﺮیﻒ‬

‫‪VT1708S/ VT1705‬‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫)اﻟﻤﺮآﺰی ﺔ اﻟﻤﻌﺎﻟﺠ ﺔ وﺣﺪة ﻋﻠ ﻰ اﻋﺘﻤ ﺎدا(‬

‫ﻓﺘﺤﺔ ‪PCI-E Gen3 x16‬‬

‫ﻋﺪد‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI-E Gen2 x 1‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪SATA2‬‬

‫ﻋﺪد ‪4‬‬

‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة ‪SATA2‬‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ ‪Smart Fan‬‬

‫اﻟﻔﺘﺤﺎت‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫اﻟﻠﻮﺣﺔ ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬

‫‪38‬‬

‫‪H6 1 M LV 2‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪USB2.0‬‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج ﻣﻨﺎﻓﺬ ‪VGA‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB2.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪USB2.0‬‬

‫ﻋﺪد ‪4‬‬

‫ﻣﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪3‬‬

‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ ‪ 170‬ﻣﻢ )ﻋﺮض( ‪ 226 X‬ﻣﻢ )ارﺗﻔﺎع(‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ﺑﺪون ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫‪Windows XP / Vista / 7‬‬
‫إﺥﻄﺎر‪.‬‬

‫‪39‬‬

Motherboard Manual

JAPANESE
仕様
Execute Disable Bit / Enhanced Intel SpeedStep® /
Socket 1155
CPU

Intel Architecture-64 / Extended Memory 64
Intel Core i7 / i5 / i3 / Pentium / Celeron プロ
Technology / Virtualization Technology / Hyper
セッサ
Threadingをサポートします

チップセット Intel H61
DDR3 DIMMスロット x 2
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量16GB
DDR3 1066 / 1333 / 1600をサポート

メインメモリ
各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3

登録済みDIMMとECC DIMMはサポートされません
をサポート

Super I/O

SATA 2

IT8772E

環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O機

H/Wモニター

能を採用しています。

ファン速度コントローラ/ モニター

低ピンカウントインターフェイス

ITEの「スマートガーディアン」機能
最高3.0 Gb/秒のデータ転送速度

統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠

LAN

10 / 100 Mb/秒のオートネゴシエーション
AR8152
半/全二重機能
VT1708S/ VT1705

HDオーディ
ハイデフィニションオーディオのサポート
オのサポート
5.1 チャンネルオーディオアウト
PCI-E Gen3 x16スロット

(CPUに依存）

PCI Express Gen2 x 1スロット

SATA2コネクタ

各コネクタは1つのSATA2デバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

オンボードコ フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

ネクタ

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ

システムファン電源装置

CMOSクリアヘッダ

スロット

H6 1 M LV 2
仕様
各コネクタは2つのフロントパネルUSB2.0ポートをサポ
USB2.0コネクタ

x2
ートします

シリアルポート

電源コネクタ(24ピン)

電源コネクタ(4ピン)

PS/2キーボード

PS/2マウス

背面パネル

VGAポート

I/O

LANポート

USB2.0ポート

オーディオジャック

ボードサイズ 170 mm (幅) X 226 mm (高さ)
OSサポート Windows XP / Vista / 7

Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。

2012/05/24

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2012:05:24 15:16:01+08:00
Modify Date                     : 2012:05:24 15:16:01+08:00
Page Count                      : 43
Creation Date                   : 2012:05:24 07:16:01Z
Mod Date                        : 2012:05:24 07:16:01Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 101001
Metadata Date                   : 2012:05:24 07:16:01Z
Creator                         : 101001
Title                           : Microsoft Word - IH61W-MHS_120524

EXIF Metadata provided by EXIF.tools

Biostar H61Mlv2 Owners Manual IH61W MHS_120524

Navigation menu

Versions of this User Manual:

Views

Navigation