Biostar H61Mlv2 Owners Manual IH61W MHS_120524

2014-07-31

: Biostar Biostar-H61Mlv2-Owners-Manual biostar-h61mlv2-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 43

H61MLV2 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Dichiarazione di conformità

sintetica

Ai sensi dell’art. 2 comma 3 del D.M.

275 del 30/10/2002

Si dichiara che questo prodotto è

conforme alle normative vigenti e

soddisfa i requisiti essenziali richiesti

dalle direttive

2004/108/CE, 2006/95/CE e

1999/05/CE

quando ad esso applicabili

Short Declaration of conformity

We declare this product is complying

with the laws in force and meeting all

the essential requirements as specified

by the directives

2004/108/CE, 2006/95/CE and

1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start......................................................................................... 1

1.2 Package Checklist ..................................................................................... 1

1.3 Motherboard Features .............................................................................. 2

1.4 Rear Panel Connectors.............................................................................. 3

1.5 Motherboard Layout ................................................................................. 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU) ............................................... 5

2.2 FAN Headers .............................................................................................. 7

2.3 Installing System Memory ........................................................................ 8

2.4 Connectors and Slots................................................................................ 10

Chapter 3: Headers & Jumpers Setup .................. 13

3.1 How to Setup Jumpers............................................................................. 13

3.2 Detail Settings .......................................................................................... 13

Chapter 4: Useful Help ........................................ 16

4.1 Driver Installation Note .......................................................................... 16

4.2 Software .................................................................................................... 17

4.3 Extra Information .................................................................................... 21

4.4 AMI BIOS Beep Code ............................................................................... 22

4.5 Troubleshooting ....................................................................................... 23

Appendix: SPEC In Other Languages ................... 24

German .................................................................................................................. 24

French .................................................................................................................... 26

Italian..................................................................................................................... 28

Spanish ................................................................................................................... 30

Portuguese ............................................................................................................ 32

Polish ...................................................................................................................... 34

Russian ................................................................................................................... 36

Arabic..................................................................................................................... 38

Japanese ................................................................................................................ 40

H61MLV2

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Thank you for choosing our product. Before you start installing the

motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board

on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable x2

Rear I/O Panel for ATX Case x1

Installation Guide x1

Fully Setup Driver DVD x1

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

CPU

Socket 1155

Intel Core i7 / i5 / i3 / Pent ium / C eleron

processor

Supports Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology

Hyper Threading

Chipset Intel H61

Super I/O

IT8772E

Provides the most commonly used legacy

Super I/O functionality

Low Pin Count Interface

Environment Control init iatives

Hardware Monitor Controller

Fan Speed Controller

ITE's "Smart Guardian" funct ion

Main

Memory

DDR3 DIMM Slots x 2

Max Memory Capacity 16GB

Each DIMM supports 512MB/

1GB/2GB/4GB/8GB DDR3

Dual Channel Mode DDR3 memory module

Supports DDR3 1066 / 1333 / 1600 (depending on

CPU)

Registered D IMM and ECC DIMM is not supported

SATA 2 Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s

SATA Version 2.0 specif icat ion co mpliant

LAN AR8152

10 / 100 Mb/s auto negotiation

Half / Full duplex capability

Sound

Codec VT1708S/ VT1705

5.1 channels audio out

High Definition Audio

Slots

PCI-E Gen3x16 slot x1

(depending on CPU) Supports PCI-E Gen2/3 x16 expansion card

PCI-E Gen2 x1 slot x1 Supports PCI-E Gen2 x1 expansion card

On Board

Connectors

SATA2 Connector x4 Each connector supports 1 SATA2 device

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

System Fan Header x1 System Fan Power supply

Clear CMOS Header x1 Restore CMOS data to factory default

H61MLV2

SPEC

USB2.0 Connector x2 Each connector supports 2 front panel USB2.0 ports

Serial Port Connector x1 Connects to RS-232 Port

Power Connector (24pin) x1 Connects to Power supply

Power Connector (4pin) x1 Connects to Power supply

Rear Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

VGA Port x1

LAN port x1

USB2.0 Port x4

Audio Jack x3

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Connect to D-SUB monitor

Connect to RJ-45 ethernet cable

Connect to USB2.0 devices

Provide Audio-In/Out and Mic. connection

Board Size 170 (W) x 226 (L) mm

OS Support Windows XP / Vista / 7

Biostar reserves the right to add or remove support

for any OS with or without notice

1.4 REAR PANEL CONNECTORS

NOTE:

z VGA Output requires a n Intel Core family processor with Intel Graphics Technology.

z Maximum resolution: VGA: 2048 x 1536 @75Hz

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

Note: represents the 1■st pin.

H61MLV2

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Notice:

1. Remove Pin Cap before installation, and make good preservation for future use.

When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin

legs won’t be damaged.

2. The motherboard might equip with two different types of pin cap. Please refer

below instruction to remove the pin cap.

Step 1: Pull the socket locking lever out from the socket then raise the

lever and load plate to the fully open position.

Step 2: Remove the Pin Cap.

Motherboard Manual

Step 3: Hold processor with your thumb and index fingers, oriented as

shown. Align the notches with the socket. Lower the processor

straight down without tilting or sliding the processor in the socket.

Step 4: Close the load plate. Pressing down on the load plate, close and

engage the socket lever.

Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into

the CPU_FAN1 to complete the installation.

H61MLV2

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

CPU_FAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

4 Smart Fan Control

SYS_FAN1: System Fan Header

Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

Note:

The SYS_FAN1 support 3-pin head connectors; the CPU_FAN1 supports 4-pin head

connector. When connecting with wires onto connectors, please note that the red wire is

the positive and should be connected to pin#2, and the black wire is Ground and should

be connected to GND.

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

H61MLV2

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

Note:

If the DIMM does not go in smoothly, do not force it. Pull it all the way out

and try again.

B. Memory Capacity

DIMM Socket

Location DDR3 Module Total Memory

Size

DDR3_A1 512MB/1GB/2GB/4GB/8GB

Max is 16GB.

DDR3_B1 512MB/1GB/2GB/4GB/8GB

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1 DDR3_B1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed; X, not installed.)

The DRAM bus width of the memory module must be the same(x8 or

x16)

Motherboard Manual

2.4 CONNECTORS AND SLOTS

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface,

it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

ATXPWR2: ATX Power Source Connector

This connector provides +12V to CPU power circuit.

Assignment

1 +12V

2 +12V

3 Ground

4 Ground

H61MLV2

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX

power supply.

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V

14 -12V 2 +3.3V

15 Ground 3 Ground

16 PS_ON 4 +5V

17 Ground 5 Ground

18 Ground 6 +5V

19 Ground 7 Ground

20 NC 8 PW_OK

21 +5V 9 Standby Voltage+5V

22 +5V 10 +12V

23 +5V 11 +12V

24 Ground 12 +3.3V

Motherboard Manual

PEX16_1: PCI-Express Gen3 x16 Slot

- PCI-Express 3.0 compliant.

- Maximum theoretical realized bandwidth of 16GB/s simultaneously per

direction, for an aggregate of 32GB/s totally.

- PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.

PEX1_2: PCI-Express Gen2 x1 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

- PCI-Express supports a raw bit-rate of 5Gb/s on the data pins.

H61MLV2

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is

placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and

speaker connection. It allows user to connect the PC case’s front panel switch

functions.

Pin Assignment Function Pin Assignment Function

1 +5V

Speaker

Connector

9 N/A N/A

2 N/A 10 N/A

3 N/A 11 N/A N/A

4 Speaker 12 Power LED (+)

Power LED

5 HDD LED (+) Hard drive

LED

13 Power LED (+)

6 HDD LED (-) 14 Power LED (-)

7 Ground Reset button 15 Power button Power-on button

8 Reset control 16 Ground

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel,

and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front

panel.

Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

6 Jack Sense

7 Front Sense

8 Key

9 Left line in

10 Jack Sense

H61MLV2

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and

the CMOS data. Please carefully follow the procedures to avoid damaging the

motherboard.

Pin 1-2 Close:

Normal Operation (default).

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Assignment

1 Carrier detect

2 Received data

3 Transmitted data

4 Data terminal ready

5 Signal ground

6 Data set ready

7 Request to send

8 Clear to send

9 Ring indicator

10 NC

Motherboard Manual

CHAPTER 4: USEFUL HELP

4.1 DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup

Driver DVD into your optical drive and install the driver for better system

performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver DVD, please use file browser to

locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will

list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide

will list the software available for your system, click on each software title

to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver

DVD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version

of Acrobat Reader software from

http://www.adobe.com/products/acrobat/readstep2.html

H61MLV2

4.2 SOFTWARE

Installing Software

1. Insert the Setup DVD to the optical drive. The drivers installation

program would appear if the Autorun function has been enabled.

2. Select Software Installation, and then click on the respective software

title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” /

“BIOS Update” appears on the desktop. Double-click the icon to launch the

utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our

Tech-Support system. This utility will collect the system information which is

useful for analyzing the problem you may have encountered, and then send

these information to our tech-support department to help you fix the problem.

Before you use this utility, please set Outlook Express as your default e-mail client application program.

This block will show

the information which

would be collected in

the mail.

Provide the e-mail

address that you would

like to send the copy to.

Provide the name of

the power suppl y

manufacturer and the

model no.

Send the ma il ou t.

Save these in for ma tion to a .txt fil

Exit this dialog.

Select your area or

the area close to you.

Pr ov id e t he name of

the memory module

manufacturer.

Describe condition

of your system.

repr es ent s impo r tant

information that you

must provide. Wi thout

this information, you may

not be able to send out

the mail.

Motherboard Manual

After filling up this information, click “Send”

to send the mail out. A warning dialog would

appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you

will see a saving dialog appears asking you to enter file name.

Enter the file name and then click

“Save”. Your system information

will be saved to a .txt file.

Open the saved .txt file, you will see

your system information including

motherboard/BIOS/CPU/video/

device/OS information. This

information is also concluded in the

sent mail.

We will not share customer’s data with any other third parties,

so please feel free to provide your system information while using

eHot-Line service.

If you are not using Outlook Express as your default e-mail client

application, you may need to save the system information to a .txt file

and send the file to our tech support with other e-mail application.

Go to the following web

http://www.biostar.com.tw/app/en-us/about/contact.php for getting

our contact information.

H61MLV2

BIOS Update

BIOS Update is a convenient utility which allows you to update your

motherboard BIOS under Windows system.

Update BIOS

with a BIOS file

Show current BIO S informatio

Save current BIOS

to a .bin file

Update BIOS

from the Internet

Once click on this button, the saving

dialog will show. Choose the

position to save file and enter file

name. (We recommend that the file

name should be English/number

and no longer than 7 characters.)

Then click Save.

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.

Then click Update BIOS button, a

dialog will show for asking you backup

current BIOS. Click Yes for BIOS

backup and refer to the Backup BIOS

procedure; or click No to skip this

procedure.

After the BIOS Backup procedure, the

open dialog will show for requesting the

BIOS file which is going to be updated.

Please choose the proper BIOS file for

updating, then click on Open.

The utility will update BIOS with the

proper BIOS file, and this process may

take minutes. Please do not open any

other applications during this process.

After the BIOS Update process, click on

OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>

key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and

Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed

without notice. For better performance, the software is being continuously updated.

The information and pictures described above are for your reference only. The actual

information and settings on board may be slightly different from this manual.

H61MLV2

4.3 EXTRA INFORMATION

CPU Overheated

If the system shuts down automatically after system is powered on for

seconds, the phenomenon means the CPU protection function has

been activated.

When the CPU is over heated, the motherboard will shutdown

automatically to avoid a damage of the CPU, and the system may not

power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection

function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

Motherboard Manual

4.4 AMI BIOS BEEP CODE

Boot Block Beep Codes

Number of Beeps Description

1 No media present. (Insert diskette in floppy drive A:)

2 “AMIBOOT.ROM” file not found in root directory of diskette in

3 Insert next diskette if multiple diskettes are used for recovery

4 Flash Programming successful

5 File read erro

7 No Flash EPROM detected

10 Flash Erase erro

11 Flash Program error

12 “AMIBOOT.ROM” file size erro

13 BIOS ROM image mismatch (file layout does not match

image present in flash device)

POST BIOS Beep Codes

Number of Beeps Description

1 Memory refresh timer error

3 Base memory read/write test error

6 Keyboard controller BAT command failed

7 General exception error (processor exception interrupt error)

8 Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3 Reseat the memory, or replace with known good modules.

6, 7

Fatal error indicating a serious problem with the system.

Consult your system manufacturer. Before declaring the

motherboard beyond all hope, eliminate the possibility of

interference by a malfunctioning add-in card. Remove all

expansion cards except the video adapter.

z If beep codes are generated when all other expansion

cards are absent, consult your system manufacturer’s

technical support.

z If beep codes are not generated when all other expansion

cards are absent, one of the add-in cards is causing the

malfunction. Insert the cards back into the system one at a

time until the problem happens again. This will reveal the

malfunctioning card.

If the system video adapter is an add-in card, replace or

reseat the

video adapter. If the video adapter is an integrated part of the

system board, the board may be faulty.

H61MLV2

4.5 TROUBLESHOOTING

Probable Solution

1. There is no power in the system.

Power LED does not shine; the

fan of the power supply does not

work

2. Indicator light on keyboard does

not shine.

1. Make sure power cable is

securely plugged in.

2. Replace cable.

3. Contact technical support.

System is inoperative. Keyboard lights

are on, power indicator lights are lit,

and hard drives are running.

Using even pressure on both ends of

the DIMM, press down firmly until the

module snaps into place.

System does not boot from a hard disk

drive, but can be booted from optical

drive.

1. Check cable running from disk to

disk controller board. Make sure

both ends are securely plugged

in; check the drive type in the

standard CMOS setup.

2. Backing up the hard drive is

extremely important. All hard

disks are capable of breaking

down at any time.

System only boots from an optical

drive. Hard disks can be read,

applications can be used, but system

fails to boot from a hard disk.

1. Back up data and applications

files.

2. Reformat the hard drive.

Re-install applications and data

using backup disks.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure

correct information is in setup.

System cannot boot after user installs a

second hard drive.

1. Set master/slave jumpers

correctly.

2. Run SETUP program and select

correct drive types. Call the drive

manufacturers for compatibility

with other drives.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

GERMAN

Spezifikationen

CPU

Socket 1155

Intel Core i7 / i5 / i3 / Pent ium / C eleron

Prozessoren

Unterstützt Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology /

Hyper Threading

Chipsatz Intel H61

Super E/A

IT8772E

Bietet die häufig verwendeten alten Sup er

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller/-Überwachung

"Smart Guardian"-Funktion von ITE

Arbeitsspeich

DDR3 DIMM-Steckplätze x 2

Max. 16GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/

1GB/2GB/4GB/8GB DDR3.

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 1066 / 1333 / 1600

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

SATA 2 Integrierter Serial ATA-Controller

Datentransferrate bis zu 3.0Gb/s

Konform mit der SATA-Spezifikation Version 2.0

LAN AR8152

10 / 100 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

Audio-Unters

tützung

VT1708S/ VT1705

Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe

Steckplätze PCI-E Gen3 x 16 Steckplatz x1 (je nach CPU)

PCI-E Gen2 x1-Steckplatz x1

Onboard-Ans

chluss

SATA2-Anschluss x4 Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

CPU-Lüfter-Sockel x1

CPU-Lüfterstromversorgungsanschluss (mit Smart

Fan- Fun ktion )

H61MLV2

Spezifikationen

System-Lüfter-Sockel x1 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen"-Sockel x1

USB2.0-Anschluss x2 Jeder Anschluss unterstützt 2

Fronttafel- USB2.0-Anschlüsse

Serieller Anschluss x1

Stromanschluss (24-polig) x1

Stromansch lus s (4-polig ) x1

Rückseiten-E

PS/2-Tastatur x1

PS/2- Maus x1

VGA-Anschluss x1

LAN-Anschluss x1

USB2.0-Anschluss x4

Audioanschluss x3

Platinengröße

170 mm (B) X 226 mm (L)

OS-Unterstüt

zung Windows XP / Vista / 7

Biostar behält sich das Recht vor, ohne Ankündigung

die Unterstützung für ein Betriebssystem

hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH

SPEC

Socket 1155

Processeurs Intel Core i7 / i5 / i3 / Pent ium /

Celeron

Prend en charge les technologies d'exécution de bit

de désactivation / Intel SpeedStep® optimisée/

d'architecture Intel 64 / de mémoire ét endue 64 / de

virtualisation / Hyper Threading

Chipset Intel H61

Super E/S

IT8772E

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Interface à f aib le co mpte de b roches

Initiatives de contrôle environnementales,

Moniteur de mat ér iel

Contrôleur /moniteur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Mémoire

principale

Fentes DDR3 DIMM x 2

Capacité mémo ire max imale de 16 Go

Chaque DIMM prend en charge des DDR3 de

512Mo/1Go/2Go/4Go/8Go

Modu le d e mémo ire DDR3 à mode à double vo ie

Prend en charge la DDR3 1066 / 1333 / 1600

Les DIMM à registres et DIMM avec code correcteurs

d'erreurs ne sont pas prises en charge

SATA 2

Contrôleur Serial ATA

int é gr é

Taux de transfert jusqu'à 3.0Go/s.

Conforme à la spécif icat ion SATA Vers ion 2.0

LAN AR8152

10 / 100 Mb/s négociation automatique

Half / Full duplex capability

Prise en

charge

audio HD

VT1708S/ VT1705

Prise en charge de l'audio haute définition

Sortie audio à 5.1 vo ies

Fentes

Fente PCI-E Gen3 x 16 x1 (en fonction du CPU)

Fente PCI-E Gen2 x1 x1

Connecteur

embarqué

Connecteur SATA2 x4

Chaque connecteur prend en charge 1 périphérique

SATA2

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1 Prend en charge la fonction aud io du panneau avant

Embase de ventilateur UC x1

Alimentation électrique du ventilateur UC (avec

fonction de ventilateur intelligent)

H61MLV2

SPEC

Embase de ventilateur système x1 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Connecteur USB2.0 x2

Chaque connecteur prend en charge 2 ports USB2.0

de panneau avant

Port série x1

Connecteur d'alimentat ion x1

(24 broches)

Connecteur d'alimentat ion x1

(4 broches)

E/S du

panneau

arrière

Clavier PS/2 x1

Souris PS/2 x1

Port VGA x1

Port LAN x1

Port USB2.0 x4

Fiche audio x3

Dimensions

de la carte 170 mm (l) X 226 mm (H)

Support SE Windows XP / Vista / 7

Biostar se réserve le droit d'ajouter ou de supprimer

le support de SE avec ou sans préavis

Motherboard Manual

ITALIAN

SPECIFICA

CPU

Socket 1155

Processore Intel Core i7 / i5 / i3 /

Pentium / Celeron

Supporto di Execute Disable Bit / Enhanced

Intel SpeedStep® / Architettura Intel 64 /

Tecnologia Extended Memory 64 / Tecnologia

Virtualization / Hyper Threading

Chipset Intel H61

Super I/O

IT8772E

Fornisce le funzionalità legacy Super I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller / Monitoraggio velocità ventolina

Funzione "Smart Guardian" di ITE

Memoria

principale

Alloggi D IMM DDR3 x 2

Capacità massima della memoria 16GB

Ciascun DIMM supporta DDR3

512MB/1GB/2GB/4GB/8GB

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 1066 / 1333 / 1600

DIMM registrati e DIMM ECC non sono

supportati

SATA 2 Controller Ser ial ATA integrato

Velocità di trasferimento dei dati fino a

3.0Gb/s.

Compatibile specifiche SATA Versione 2.0

LAN AR8152

Negoziazione automatica 10 / 100 Mb/s

Capacità Half / Full Duplex

Supporto

audio HD VT1708S/ VT1705

Supporto audio High-Definition (HD)

Uscita audio 5.1 canali

Alloggi Alloggio PCI-E Gen3 x16 x1 (a seconda del CPU)

Alloggio PCI Express Gen2 x1 x1

Connettori

su scheda

Connettore SATA2 x4 Ciascun connettore supporta 1 unità SATA2

Connettore pannello frontale x1 Supporta i servizi del pannello frontale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Collettore ventolina C PU x1

Alimentazione ventolina CPU (con funzione

Smart Fan)

Collettore ventolina sistema x1 Alimentazione ventolina d i sistema

H61MLV2

SPECIFICA

Collettore cancellaz ione CMOS x1

Connettore USB2.0 x2

Ciascun connettore supporta 2 porte USB2.0

pannello frontale

Porta seriale x1

Connettore alimentazione x1

(24 pin)

Connettore alimentazione x1

(4 pin)

I/O

pannello

posteriore

Tas t iera PS /2 x 1

Mouse PS/2 x1

Porta VGA x1

Porta LAN x1

Porta USB2.0 x4

Connettore audio x3

Dimension

i scheda

170 mm (larghezza) x 226 mm

(altezza)

Sistemi

operativi

supportati

Windows XP / Vista / 7

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

Motherboard Manual

SPANISH

Especificación

CPU

Socket 1155

Procesador Intel Core i7 / i5 / i3 / Pent iu m /

Celeron

Admite Bit de deshabilitación de ejecución / Intel

SpeedStep® Mejorado / Int el Architecture-64 /

Tecnología Extended Memory 64 / Tecno logía de

virtualización / Hyper Threading

Conjunto de

chips Intel H61

Súper E/S

IT8772E

Le ofrece las funcionalidades heredadas de

uso más comú n Súper E /S.

Interfaz de cuenta Low Pin

In iciat ivas de control de entorno,

Monitor hardware

Controlador/monitor de velocidad de ventilador

Función "Guardia inteligente" de ITE

Memoria

principal

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 16GB

Cada DIMM admite DDR de

512MB/1GB/2GB/4GB/8GB

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 1066 / 1333 / 1600

No admite DIMM registrados o DIMM compatibles

con ECC

SATA 2 Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3.0 Gb/s.

Compat ible con la versión SATA 2.0

Red Local AR8152

Negociación de 10 / 100 Mb/s

Funciones Half / Full dúplex

Soporte de

sonido HD VT1708S/ VT1705

Soporte de sonido de Alta Definición

Salida de sonido de 5.1 canales

Ranuras

Ranura PCI-E Gen3 x16 X1 (dependiendo de la CPU)

Ranura PCI-E Gen2 x 1 X1

Conectores

en placa

Conector SATA2 X4 Cada conector soporta 1 dispositivos SATA2

Conector de panel frontal X1 Soporta instalaciones en el panel frontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

función Smart Fan)

Cabecera de ventilador de sistema X1 Fuente de alimentación de ventilador de sistema

H61MLV2

Especificación

Cabecera de borrado de CMOS X1

Conector USB2.0 X2 Cada conector soporta 2 puertos USB2.0 frontales

Puerto serie X1

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4 patillas)

Panel

trasero de

E/S

Tec lado PS /2 X 1

Ratón PS/2 X1

Puerto VGA X1

Puerto de red local X1

Puerto USB2.0 X4

Conector de sonido X3

Ta maño d e

la placa 170 mm. (A) X 226 Mm. (H)

Soporte de

sistema

operativo

Windows XP / Vista / 7

Biostar se reserva el derecho de añadir o retirar el

soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE

ESPECIFICAÇÕES

CPU

Socket 1155

Processador Intel Core i7 / i5 / i3 / Pent iu m /

Celeron

Suporta as tecnologias Execute Disable B it /

Enhanced Intel SpeedStep® / Intel Arquitecture -64

/ Extended Memory 64 / V irtualization / Hyper

Threading

Chipset Intel H61

Especificaçã

o Super I/O

IT8772E

Proporciona as funcionalidades mais

utilizadas em termos da especificação Super

I/O.

Interface LPC (Low Pin Count).

In iciat ivas par a contro lo do amb iente

Monitorização do hardware

Controlador/Monitor da velocidade da ventoinha

Função "Smart Guardian" da ITE

Memória

principal

Ranhuras DIMM DDR3 x 2

Capacidad e máx ima d e memória: 16 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512MB/ 1GB/2GB/4GB/8GB

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 1066 / 1333 / 1600

Os módulos DIMM registados e os DIMM ECC não

são suportados

SATA 2 Controlador Serial ATA integrado

Velocidades de transmissão de dados até 3.0 Gb/s.

Compatibilidad e co m a especificação SATA versão

2.0

LAN AR8152

Auto negociação de 10 / 100 Mb/s

Capacidade semi/full-duplex

Suporte

para áudio

de alta

definição

VT1708S/ VT1705

Suporta a especificação High-Definition Audio

Saída de áudio de 5.1 canais

Ranhuras

Ranhura PCI-E Gen3 x16 x1 (dependendo da CPU)

Ranhura PCI-E Gen2 x 1 x1

Conectores

na placa

Conector SATA2 x4 Cada conector suporta 1 dispositivo SATA2

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

Conector de áudio frontal x1 Suporta a fun ção de áudio no painel frontal

Conector da ventoinha da CPU x1

Alimentação da ventoinha da CPU (com a função

Smart Fan)

H61MLV2

ESPECIFICAÇÕES

Conector da ventoinha do sistema x1 Alimentação da ventoinha do s istema

Conector para limpeza do CMOS x1

Conector USB2.0 x2

Cada conector suporta 2 portas USB2.0 no painel

frontal

Porta série x1

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(4 p inos)

Entradas/S

aídas no

painel

traseiro

Tec lado PS /2 x 1

Rato PS/2 x1

Porta VGA x1

Porta LAN x1

Porta USB2.0 x4

Tomada de áudio x3

Tamanho

da placa 170 mm (L) X 226 mm (A)

Sistemas

operativos

suportados

Windows XP / Vista / 7

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema operativo

com ou sem aviso prévio.

Motherboard Manual

POLISH

SPEC

Procesor

Socket 1155

Procesor Intel Core i7 / i5 / i3 / Pent ium /

Celeron

Obsługa Execute Dis able Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology

Hyper Threading

Chipset Intel H61

Pamięć

główna

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 16GB

Każde gniazdo DIMM obsługuje moduły

512MB/1GB/2GB/4GB/8GB DDR3

Modu ł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 1066 / 1333 / 1600

Brak obsługi Registered DIMM oraz ECC DIMM

Super I/O

IT8772E

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler/Monitor prędkości wentylatora

Funkcja ITE "Smart Guardian"

SATA 2 Zintegrowany kontroler Serial ATA

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0

LAN AR8152

10 / 100 Mb/s z automatyczną negocjacją szybkości

Działanie w trybie połowicznego / pełnego dupleksu

Obsługa

audio HD VT1708S/ VT1705

Obsługa High-Def in ition Aud io

5.1 kanałowe wyjście audio

Gniazda

Gniazdo PCI-E Gen3 x16 x1 (w zależności od procesora)

Gniazdo PCI-E Gen2 x 1 x1

Złącza

wbudowane

Złącze SATA2 x4 Każde złącze obs ługuje 1 urządzenie SATA2

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim

Złącze główkowe wentylatora

procesora x1

Zasilanie wentylatora procesora (z funkcją Smart

Fan )

Złącze główkowe wentylatora

systemowego x1

Zasilanie wentylatora systemowego

H61MLV2

SPEC

Złącze główkowe kasowania CMOS x1

Złącze USB2.0 x2

Każde złącze obs ługuje 2 porty USB2.0 na panelu

przednim

Port szeregowy x1

Złącze zasilania (24 pinowe) x1

Złącze zasilania (4 pinowe) x1

Back Panel

I/O

Klawiatura PS/2 x1

Mysz PS /2 x1

Port VGA x1

Port LAN x1

Port USB2.0 x4

Gniazdo audio x3

Wymiary

płyty 170 mm (S) X 226 mm (W)

Obsluga

systemu

operacyjne

Windows XP / Vista / 7

Biostar zastrzega sobie prawo dodawania lub

odwoływania obsług i dowo ln ego systemu

operacyjnego b ez powiado mienia.

Motherboard Manual

RUSSIAN

СПЕЦ

CPU

(центральн

ый

процессор)

Socket 1155

Процессор Intel Core i7 / i5 / i3 / Pent iu m /

Celeron

Поддержка технологий Execute Disable Bit /

Enhanced Intel Sp eedStep® / Int el Archit ecture-64

/ Extended Memory 64 Technology / технологии

виртуализация / Hyper Threading

Набор

микросхем

Intel H61

Основная

память

Слоты DDR3 DIMM x 2

Максимальная ёмкость памяти 16 ГБ

Каждый модуль DIMM поддерживает

512МБ /1ГБ/2ГБ/4ГБ/8ГБ DDR3

Модуль памяти с двухканальн ым режимом DDR3

Поддержка DDR3 1066 / 1333 / 1600

Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Super I/O

IT8772E

Обеспечивает наиболее используемые

действующие фун кц ионал ьны е

возможности Super I/O.

Интерфейс с низким количеством выводов

Инициативы по охране окружающей среды,

Аппаратный монитор

Регул ятор скорости вентилятора/ монитор

Функц ия ITE "Smart Guardian"

(Интеллектуальная защита)

SATA 2

Встроенное последоват ельное устройство

управления ATA

скорость передачи данных до 3.0 гигабит/с.

Соответствие спецификации SATA версия 2.0

Локальная

сеть

AR8152 Автоматическое согласование 10 / 100 Мб /с

Частичная / полная дуплексная способность

Звуко вая

поддержка

жесткого

диска

VT1708S/ VT1705 Звуко вая поддержка High-Definition

5.1канальный звуковой выход

Слоты

Слот PCI-E Gen3 x16 @ x16 x1 (в зависимости от процессора)

Слот PCI-E Gen2 x 1 x1

Встроенны

й разъём

Разъ ём SATA2 x4 Каждый разъём поддерживает 1 устройство SATA2

Разъ ём на лицевой панели x1 Поддержка устройств на лицевой панели

Входной звуковой разъём x1

Поддержка звуко вых функций на лицевой

панели

Контактирующее приспособление

вентилятора центрального процессора x1

Источник питания для вентилятор а центрального

процессора (с фун кц ией интеллектуального

вентилятора)

H61MLV2

СПЕЦ

Контактирующее приспособление

вентилятора системы x1

Источник питания для вентилятор а системы

Открытое контактирующее

приспособление CMOS x1

USB2.0-разъём x2

Каждый разъём поддерживает 2 USB2.0-порта на

лицевой панели

Последовательный порт x1

Разъ ем питания (24 вывод) x1

Разъ ем питания (4 вывод) x1

Задняя

панель

средств

ввода-выв

ода

Клавиатура PS/2 x1

Мышь PS/2 x1

Порт VGA x1

Порт LAN x1

USB2.0-порт x4

Гнездо для подключения

наушнико в x3

Размер

панели

170 мм (Ш) X 226 мм (В)

Поддержка

Windows XP / Vista / 7

Biostar сохраняет за собой право добавлять или

удалять средства обеспечения для OS с или без

предварительного уведомления.

Motherboard Manual

ARABIC

تﺎﻔﺻاﻮﻤﻟا

تﺎﻴﻨﻘﺗ ﻢﻋﺪﺗExecute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology

Hyp er Thread ing

Socket 1155

ﺎﺠﻟﺎﻌﻣ تIntel Cor e i7 / i5 / i3 / Pentiu m /

Celeron ﺑددﺮﺘ ی ﻰﻟإ ﻞﺼ

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔیﺰآﺮﻤﻟا

Intel H61 ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

ﺔﺤﺘﻓDDR3 DIMM دﺪﻋ2

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ16 ﺖیﺎﺑ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ /512 و ﺖیﺎﺑ ﺎﺠﻴﻣ1/

و2/ و4/ و8 ﺎﺠﻴﺝﺖیﺎﺑ

ةﺮآاذ ةﺪﺣوDDR3 ﻘﻟا ﺔﺝودﺰﻣةﺎﻨ

عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗ DDR3 تﺎﻌﺳ 1066 / 1366 /

1600 ﺎﺠﻴﻣ ﺖیﺎﺑ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠ ﺗو ECC

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻣ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺝﻷا

ﺐﻗاﺮﻣ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE

IT8772E

ﺮﻓﻮﺗ ﺔﻔﻴﻇو Super I/O ﺮﺜآﻷا ًﺎﻣ ا ﺪ ﺨ ﺘ ﺳ ا.

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ Low Pin Count Interface

Super I/O

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺑ ﻞﺼﺗ ﻰﻟإ 3.0 ﺖﺑﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.

ﺔﻘﺑﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 2.0

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

SATA 2

ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ10/100 ﺖیﺎﺑ ﺎﺠﻴﻣ /ﺔﻴﻥﺎﺙ

ﺔﻴﻥﺎﻜﻣإ ﻨﻟاﻞﻘ جودﺰﻤﻟا ﻞﻣﺎﻜﻟا/ﻲﻔﺼﻨﻟا

AR8152

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ تﻮﺼﻟا ﻲﻟﺎﻋ ﻒیﺮﻌﺘﻟا ﻦﻣ

5.1 تاﻮﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

VT1708S/ VT1705

ﻢﻋد تﻮﺼﻟا ﻲﻟﺎﻋ

ﻒیﺮﻌﺘﻟا

(ادﺎﻤﺘﻋا ﻰﻠﻋ ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا ﺔیﺰآﺮﻤﻟا) ﺔﺤﺘﻓPCI-E Gen3 x16 دﺪﻋ1

تﺎﺤﺘﻔﻟا

ﺔﺤﺘﻓPCI-E Ge n2 x 1 دﺪﻋ1

ﺣاو ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪی ةﺰﻬﺝأ ﻦﻣ ﺪSATA2 ﺬﻔﻨﻣSATA2 دﺪﻋ4

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺳ

ﺔﺣﻮﻠﻟا

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا تاﺰﻴﻬﺠﺗ ﻢﻋﺪی ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎﺑ تﻮﺼﻟا ﺔﻔﻴﻇو ﻢﻋﺪی ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻔﻴﻇو ﻊﻣ ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟSmart Fan ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ ﺔﻠﺹوﺔیﺰآﺮﻤﻟا دﺪﻋ1

H61MLV2

تﺎﻔﺻاﻮﻤﻟا

مﺎﻈﻨﻟا ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟ مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﺢﺴﻣ ﺔﻠﺹوCMOS دﺪﻋ1

ﻲﺘﺤﺘﻓ ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪیUSB2.0 ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎﺑ ﺬﻔﻨﻣUSB2.0 دﺪﻋ2

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮﺑد( دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)4ﺲﻴﺑﺎﺑد( دﺪﻋ1

ﺢﻴﺗﺎﻔﻣ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻣ PS/2 دﺪﻋ1

ﺬﻓﺎﻨﻣVGA دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻓﺎﻨﻣ2.0USB دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

ﺬﻓﺎﻨﻣ ﻞﺥد/جﺮﺥ

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

170 ﻢﻣ)ضﺮﻋ (X 226 ﻢﻣ)عﺎﻔﺗرا( ﻢﺠﺣ ﺔﺣﻮﻠﻟا

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ ﻴﻐﺸﺗﻞ رﺎﻄﺥﺈﺑ وأ نوﺪﺑ

رﺎﻄﺥإ.

Windows XP / Vista / 7 ﻢﻋد ﺔﻤﻈﻥأ ﻞﻴﻐﺸﺘﻟا

Motherboard Manual

JAPANESE

仕様

CPU

Socket 1155

Intel Cor e i7 / i5 / i3 / Pent iu m / C eleron プロ

セッサ

Execute Disable Bit / Enhanced Intel SpeedStep® /

Intel Architecture-64 / Extended Memory 64

Technology / Virtualization Technology / Hyper

Threadingをサポートします

チップセット Intel H61

メインメモリ

DDR3 DIMMスロット x 2

最大メモリ容量16GB

各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3

をサポート

デュアルチャンネルモードDDR3メモリモジュール

DDR3 1066 / 1333 / 1600をサポート

登録済みDIMMとECC DIMMはサポートされません

Super I/O

IT8772E

もっとも一般に使用されるレガシーSuper I/O機

能を採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITEの「スマートガーディアン」機能

SATA 2 統合シリアルATA コントローラ最高3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠

LAN AR8152

10 / 100 Mb/秒のオートネゴシエーション

半/全二重機能

HDオーディ

オのサポート

VT1708S/ VT1705

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

スロット

PCI-E Gen3 x16スロット x1 (CPUに依存）

PCI Express Gen2 x 1スロット x1

オンボードコ

ネクタ

SATA2コネクタ x4 各コネクタは1つのSATA2デバイスをサポートします

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ x1 システムファン電源装置

CMOSクリアヘッダ x1

H61MLV2

仕様

USB2.0コネクタ x2

各コネクタは2つのフロントパネルUSB2.0ポートをサポ

ートします

シリアルポート x1

電源コネクタ(24ピン) x1

電源コネクタ(4ピン) x1

背面パネル

I/O

PS/2キーボード x1

PS/2マウス x1

VGAポート x1

LANポート x1

USB2.0ポート x4

オーディオジャック x3

ボードサイズ 170 mm (幅) X 226 mm (高さ)

OSサポート Windows XP / Vista / 7

Biostarは事前のサポートなしにOSサポートを追加または

削除する権利を留保します。

2012/05/24

Biostar H61Mlv2 Owners Manual IH61W MHS_120524

Navigation menu

Versions of this User Manual:

Views

Navigation