Biostar Hi Fi B85S3 Plus Owners Manual IZ87B MHS & IH87B IB85B MHS_130507
2014-07-31
: Biostar Biostar-Hi-Fi-B85S3-Plus-Owners-Manual biostar-hi-fi-b85s3-plus-owners-manual biostar pdf
Open the PDF directly: View PDF 
.
Page Count: 59
| Download | |
| Open PDF In Browser | View PDF |
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing. The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies. Dichiarazione di conformità sintetica Ai sensi dell’art. 2 comma 3 del D.M. 275 del 30/10/2002 Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive 2004/108/CE, 2006/95/CE e 1999/05/CE quando ad esso applicabili Short Declaration of conformity We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives 2004/108/CE, 2006/95/CE and 1999/05/CE whenever these laws may be applied Table of Contents Chapter 1: Introduction ................................................. 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................1 Package Checklist ............................................................................1 Motherboard Specifications .............................................................2 Rear Panel Connectors....................................................................4 Motherboard Layout..........................................................................5 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Install Central Processing Unit (CPU)............................................6 Install a Heatsink ...............................................................................8 Connect Cooling Fans......................................................................9 Install System Memory ...................................................................10 Expansion Slots...............................................................................11 Jumper Setting ................................................................................13 Headers & Connectors ...................................................................14 3.1 3.2 3.3 UEFI BIOS Setup ............................................................................20 BIOS Update....................................................................................20 Software............................................................................................24 4.1 4.2 4.3 4.4 Driver Installation.............................................................................34 AMI BIOS Beep Code.....................................................................35 Troubleshooting...............................................................................35 RAID Functions ...............................................................................37 Chapter 2: Hardware Installation .................................. 6 Chapter 3: UEFI BIOS & Software ................................ 20 Chapter 4: Useful Help ................................................. 34 Appendix: Specifications in Other Languages .............. 40 Arabic.....................................................................................................................40 French ...................................................................................................................42 German .................................................................................................................44 Italian .....................................................................................................................46 Japanese...............................................................................................................48 Polish .....................................................................................................................50 Portuguese ...........................................................................................................52 Russian .................................................................................................................54 Spanish..................................................................................................................56 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ CHAPTER 1: INTRODUCTION 1.1 Before You Start Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation. Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. Keep the computer from dangerous area, such as heat source, humid air and water. The operating temperatures of the computer should be 0 to 45 degrees Celsius. To avoid injury, be careful of: Sharp pins on headers and connectors Rough edges and sharp corners on the chassis Damage to wires that could cause a short circuit 1.2 Package Checklist ; ; ; ; Serial ATA Cable x2 Rear I/O Panel for ATX Case x1 User’s Manual x1 Fully Setup Driver DVD x1 Note: The package contents may be different due to the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative. 1 Motherboard Manual 1.3 Motherboard Specifications Specifications Socket 1150 for Intel® Core i7 / i5 / i3 / Pentium / Celeron processor CPU Support Maximum CPU TDP (Thermal Design Power): 95Watt * Please refer to www.biostar.com.tw for CPU support list. Chipset INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Supports Dual Channel DDR3 1066/ 1333/ 1600 Supports Dual Channel DDR3 DDR3 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) for Memory Hi-Fi Z87S3+ 4 x DDR3 DIMM Memory Slot, Max. Supports up to 32 GB Memory Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 module * Please refer to www.biostar.com.tw for Memory support list. Storage INTEL® Z87 & H87: INTEL® B85: 6x SATA 6Gb/s Connector 4x SATA 6Gb/s Connector Supports RAID 0,1,10,5, SRT & AHCI 2x SATA 3Gb/s Connector Supports AHCI LAN Audio Codec Realtek RTL 8111F 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability ALC892 7.1 Channels, High Definition Audio, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+ 6x USB 3.0 port (4 on rear I/Os and 2 via internal headers) USB 6x USB 2.0 port (2 on rear I/Os and 4 via internal headers) Hi-Fi B85S3+ 4x USB 3.0 port (2 on rear I/Os and 2 via internal headers) 8x USB 2.0 port (4 on rear I/Os and 4 via internal headers) 1x PCI Slot Expansion Slots 2x PCIe 2.0 x1 Slot 1x PCIe 3.0 x16 Slot (x16) Rear I/Os 2 Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 1x PS/2 Mouse/Keyboard 1x PS/2 Mouse/Keyboard 1x HDMI Port 1x HDMI Port 1x VGA Port 1x VGA Port 1x DVI Port 1x DVI Port 1x LAN port 1x LAN port 2x USB 2.0 Port 4x USB 2.0 Port 4x USB 3.0 Port 2x USB 3.0 Port 6x Audio Jack 6x Audio Jack Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Specifications Internal I/Os Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x SATA 6.0Gb/s Connector 4x SATA 6.0Gb/s Connector 2x USB 2.0 Header 2x SATA 2.0Gb/s Connector (each header supports 2 USB 2.0 ports) 2x USB 2.0 Header 1x USB 3.0 Header (each header supports 2 USB 2.0 ports) (each header supports 2 USB 3.0 ports) 1x USB 3.0 Header 1x 4-Pin Power Connector (each header supports 2 USB 3.0 ports) 1x 24-Pin Power Connector 1x 4-Pin Power Connector 1x CPU Fan Connector 1x 24-Pin Power Connector 2x System Fan Connector 1x CPU Fan Connector 1x Front Panel Header 2x System Fan Connector 1x Front Audio Header 1x Front Panel Header 1x Clear CMOS Header 1x Front Audio Header 1x Consumer IR Header 1x Clear CMOS Header 1x Serial Port Header 1x Consumer IR Header 1x S/PDIF out Connector 1x Serial Port Header 1x Printer Port Header 1x S/PDIF out Connector 1x Printer Port Header Form Factor OS Support ATX Form Factor, 244 mm x 230 mm Windows 7/ 8 Biostar reserves the right to add or remove support for any OS with or without notice. 3 Motherboard Manual 1.4 Rear Panel Connectors Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Note1: Note2: Note3: 4 HDMI, DVI-D & VGA ports only work with an Intel® integrated Graphics Processor. Maximum resolution: HDMI: 4096 x 2160 @24Hz, compliant with HDMI 1.4a DVI: 1920 x 1200 @60Hz VGA: 1920 x 1200 @60Hz The mainboard supports three onboard display outputs at same time. Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 1.5 Motherboard Layout st Note: ■ represents the 1 pin. 5 Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 Install Central Processing Unit (CPU) Step 1: Locate the CPU socket on the motherboard Note1: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Note2: The motherboard might equip with two different types of pin cap. Please refer below instruction to remove the pin cap. Step 2: Pull the socket locking lever out from the socket and then raise the lever up. Step 3: Remove the Pin Cap. 6 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Step 4: Hold processor with your thumb and index fingers, oriented as shown. Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket. Note1: The LGA1155 CPU is not compatible with LGA 1150 socket. Do not install a LGA 1155 CPU on the LGA 1150 socket. Note2: The CPU fits only in one correct orientation. Do not force the CPU into the socket to prevent damaging the CPU. Step 5: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. 7 Motherboard Manual 2.2 Install a Heatsink Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest to the CPU fan connector. Step 2: Press down two fasteners at one time in a diagonal sequence to secure the CPU fan assembly in place. Ensure that all four fasteners are secured. Note1: Do not forget to connect the CPU fan connector. Note2: For proper installation, please kindly refer to the installation manual of your CPU heatsink. 8 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 2.3 Connect Cooling Fans These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. CPU_FAN1: CPU Fan Header Pin 1 2 3 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control (By Fan) Pin 1 2 3 Assignment Ground +12V FAN RPM rate sense SYS_FAN1/2: System Fan Header Note: CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to pin#1(GND). 9 Motherboard Manual 2.4 Install System Memory DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again. 10 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB/8GB DDR3_A2 512MB/1GB/2GB/4GB/8GB DDR3_B1 512MB/1GB/2GB/4GB/8GB DDR3_B2 512MB/1GB/2GB/4GB/8GB Total Memory Size Max is 32GB. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 Enabled O X O DDR3_B2 X Enabled X O X O Enabled O O O O (O means memory installed, X means memory not installed.) Note: The DRAM bus width of the memory module must be the same (x8 or x16) 2.5 Expansion Slots Install an Expansion Card You can install your expansion card by following steps: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Place a card in the expansion slot and press down on the card until it is completely seated in the slot. 4. Secure the card’s metal bracket to the chassis back panel with a screw. 5. Replace your computer's chassis cover. 6. Power on the computer, if necessary, change BIOS settings for the expansion card. 7. Install related driver for the expansion card. 11 Motherboard Manual PEX16_1: PCI-Express Gen3 x16 Slot - PCI-Express 3.0 compliant. Maximum theoretical realized bandwidth of 16GB/s simultaneously per direction, for an aggregate of 32GB/s totally. PEX1_1/1_2: PCI-Express Gen2 x1 Slots - PCI-Express 2.0 compliant. Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total PCI1: Peripheral Component Interconnect Slot The PCI slots support cards used in PCs include: LAN cards, sound cards, modems, TV tuner cards and other cards that comply PCI standard. 12 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 2.6 Jumper Setting The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin1-2 closed JCMOS1: Clear CMOS Jumper Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC. Load Optimal Defaults and save settings in CMOS. 13 Motherboard Manual 2.7 Headers & Connectors ATXPWR1: ATX Power Source Connector This connector allows user to connect an ATX 24-pin power supply. Make sure to find the proper orientation before plugging the connector. Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V ATXPWR2: ATX Power Source Connector The connector provides +12V to the CPU power circuit. Pin 1 2 3 4 Assignment +12V +12V Ground Ground Note1: Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in. Note2: Insufficient power supplied to the system may result in instability or the peripherals not functioning properly. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. 14 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ PANEL1: Front Panel Header This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions. Pin 1 2 3 4 5 6 7 8 Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control Function Pin 9 10 11 12 13 14 15 16 Speaker Connector Hard drive LED Reset button Assignment N/A N/A N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground Function N/A N/A Power LED Power-on button SATA1~SATA6: Serial ATA Connectors These connectors connect to SATA hard disk drives via SATA cables. Please refer below table for SATA data transfer rates. Connectors Models SATA1 SATA2 SATA3 Hi-Fi Z87S3+ SATA5 SATA6 SATA 6Gb/s Hi-Fi H87S3+ Hi-Fi B85S3+ SATA4 SATA 6Gb/s SATA 6Gb/s SATA 3Gb/s Pin 1 2 3 4 5 6 7 Assignment Ground TX+ TXGround RXRX+ Ground 15 Motherboard Manual JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel This header allows user to add additional USB ports on the PC front panel, and also can be connected with a wide range of external peripherals. Pin 1 2 3 4 5 6 7 8 9 10 Assignment VBUS0 SSRX1SSRX1+ Ground SSTX1SSTX1+ Ground D1D1+ ID Pin 11 12 13 14 15 16 17 18 19 20 Assignment D2+ D2Ground SSTX2+ SSTX2Ground SSRX2+ SSRX2VBUS1 Key F_USB1/2: Header for USB 2.0 Ports at Front Panel This header allows user to add additional USB ports on the PC front panel, and also can be connected with a wide range of external peripherals. Pin 1 2 3 4 5 6 7 8 9 10 16 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground NC Key Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ F_AUDIO1: Front Panel Audio Header This header allows user to connect the chassis-mount front panel audio I/O which supports HD and AC’97 audio standards. Pin 1 2 3 4 5 6 7 8 9 10 HD Audio Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense Pin 1 2 3 4 5 6 7 8 9 10 AC’97 Assignment Mic In Ground Mic Power Audio Power RT Line Out RT Line Out Reserved Key LFT Line Out LFT Line Out Note1: It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability. Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97 front audio output cable. The function can be found via O.S. Audio Utility. JSPDIFOUT1: Digital Audio-out Connector The connector is for connecting the S/PDIF output bracket. Pin Assignment 1 2 3 +5V SPDIF_OUT Ground 17 Motherboard Manual COM: Serial Port Header The motherboard has a serial port header for connecting RS-232 Port. Pin 1 2 3 4 5 6 7 8 9 10 J_PRINT1: Printer Port Header This header allows user to connect a printer to the PC. Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 18 Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key Assignment Carrier detect Received data Transmitted data Data terminal ready Signal ground Data set ready Request to send Clear to send Ring indicator NC Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ CIR1: Consumer IR Header This header is for infrared remote control and communication. Pin 1 2 3 4 5 6 Assignment IrDA serial input Ground Ground Key IrDA serial output IR Power 19 Motherboard Manual CHAPTER 3: UEFI BIOS & SOFTWARE 3.1 z z 3.2 UEFI BIOS Setup The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing thekey after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual in the Setup DVD. BIOS Update The BIOS can be updated using either of the following utilities: z BIOSTAR BIOS Flasher: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM. z BIOSTAR BIOS Update Utility: It enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the Web. BIOSTAR BIOS Flasher BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive. Note1: This utility only allows storage device with FAT32/16 format and single partition. Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot failure. Updating BIOS with BIOSTAR BIOS Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, copy and save the BIOS file into a USB flash (pen) drive. 3. Insert the USB pen drive that contains the BIOS file to the USB port. 4. Power on or reset the computer and then pressduring the POST process. 5. After entering the POST screen, the BIOS-FLASHER utility pops out. Choose [fs0] to search for the BIOS file. 20 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS. 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system. 8. While the system boots up and the full screen logo shows up, press key to enter BIOS setup. After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults function to load Optimized Defaults, and select Save Changes and Reset to restart the computer. Then, the BIOS Update is completed. BIOS Update Utility (through the Internet) 1. Installing BIOS Update Utility from the DVD Driver. 2. Please make sure the system is connected to the internet before using this function. 3. Launch BIOS Update Utility and click the Online Update button on the main screen. 21 Motherboard Manual 4. An open dialog will show up to request your agreement to start the BIOS update. Click Yes to start the online update procedure. 5. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed. 6. After the download is completed, you will be asked to program (update) the BIOS or not. Click Yes to proceed. 7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot. 8. While the system boots up and the full screen logo shows up, presskey to enter BIOS setup. After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults function to load Optimized Defaults, and select Save Changes and Reset to restart the computer. Then, the BIOS Update is completed. BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/ 3. Launch BIOS Update Utility and click the Update BIOS button on the main screen. 22 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure. 5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open. It will take several minutes, please be patient. 6. After the BIOS Update process is finished, click on OK to reboot the system. 7. While the system boots up and the full screen logo shows up, presskey to enter BIOS setup. After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults function to load Optimized Defaults, and select Save Changes and Reset to restart the computer. Then, the BIOS Update is completed. Backup BIOS Click the Backup BIOS button on the main screen for the backup of BIOS, and select a proper location for your backup BIOS file in the system, and click Save. 23 Motherboard Manual 3.3 Software Installing Software 1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled. 2. 3. Select Software Installation, and then click on the respective software title. Follow the on-screen instructions to complete the installation. Launching Software After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it. Note1: All the information and content about following software are subject to be changed without notice. For better performance, the software is being continuously updated. Note2: The information and pictures described below are for your reference only. The actual information and settings on board may be slightly different from this manual. BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose BMP as your boot logo so as to customize your computer. Please follow the step-by-step instructions below to update boot logo: z Load Image：Choose the picture as the boot logo. z Transform：Transform the picture for BIOS and preview the result. z Update Bios：Write the picture to BIOS Memory to complete the update. 24 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ eHot-Line eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Note: Before you use this utility, please set Outlook Express as your default e-mail client application program. represents important information that you must provide. Without this information, you may not be able to send out the mail. * This block will show the information which would be collected in the mail. condition *Describe of your system. your area or *Select the area close to you. Provide the e-mail address that you would like to send the copy to. the name of *Provide the memory module manufacturer. Provide the name of the power supply manufacturer and the model no. Send the mail out. Exit this dialog. Save these information to a .txt file After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. 25 Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service. Note2: If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following website http://www.biostar.com.tw/app/en/about/contact.php for getting our contact information. 26 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Smart EAR Hi-Fi Audio Requirements: 1. A chassis with front audio output jacks 2. An earphone or a headphone 3. Windows 7 or Windows 8 operation system Installation Guide: 1. Make sure the front audio cable of the chassis connected to the front audio header of the motherboard properly. 2. Install the Smart Ear 3D Utility from the driver DVD. 3. Connect the earphone or headphone to the front audio jack of the chassis. Note: If you want to use an AC'97 front audio output cable, please disable the "Front Panel Jack Detection" setting. This setting can be found via O.S. Audio Utility. Smart EAR Utility: z High/Low Gain Switch: Keep the gain switch to low for low impedance headphone and set to high for high impedance headphone. z Mute Button: To disable system sound z Volume Control Knob: The volume can be finely adjusted by turning the knob either clockwise or anti-clockwise to increase or decrease system volume accordingly. z Information Button: Get information of the application z Minimize Button: Minimize the application window to the taskbar z Exit Button: Exit the application 27 Motherboard Manual Smart Connect Technology Intel® Smart Connect Technology is designed to update programs by periodically waking your computer from sleep/standby mode for a short time. This function works with applications that automatically get their data from the Internet. System Requirement: z z z z Intel Smart Connect Technology enabled in BIOS Setup Set the “ACPI Sleep State” to S3 in BIOS Setup. Windows 7 and Windows 8 Normal internet connection Configuring Intel Smart Connect Technology Step 1: After installing the operating system and motherboard drivers, install the Intel Smart Connect Technology application. Restart your computer when completed. Step 2: Click on start menu and input "regedit" in the search bar. Press enter to open the registry editor. Look for the following directory in the registry editor: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Intel\Intel Smart Connect Technology Right-click on Intel Smart Connect Technology and select New > Key. Type “OEM”. Note: Intel Smart Connect Technology is for S3 mode only. During the updating process, the monitor will not light up and no sound will be output from the speaker. Step 3: As shown in the screenshot below, right-click on OEM, select New > Multi-String Value, and type “WhiteList”. Double-click WhiteList and type the application name to be added in Edit Multi-String. For example, to add Microsoft Live Mail, type “wlmail.exe”. Restart your computer when completed. Step 4: After completing the steps above, go to Start\All Programs\Intel and launch Intel(R) Smart Connect Technology. 28 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Basic and advanced settings Basic Tab Update Frequency slider: This slider bar sets the amount of time the feature waits to wake your computer and update your applications. Move the slider in the user interface to change the frequency. The slider bar can be set to wake and update your computer from every 15 to 60 minutes. The longer the time between updates the less power the feature consumes. Reset All to Defaults button: This button is designed to reset Intel® Smart Connect Technology back to the original factory setting for wake frequency. Advanced Tab Extended Power Savings: You can set a time for Intel Smart Connect Technology to work in Extended Power Savings mode. This night time mode updates your computer every two hours, saving power for the times you are not using your computer. 29 Motherboard Manual Rapid Start Technology Intel® Rapid Start technology enables your system to get up and running faster from even the deepest sleep, saving time and power consumption. Feel secure knowing that your system will still resume to working conditions in the event of unexpected power loss while in sleep mode. System Requirement: z z An Intel® SATA SSD (SATA Gen2 or Gen3. Preferably Gen3, and 80 GB or larger) Windows 7 and Windows 8 Note1: Please visit below webpage for more details about operating systems supporting http://www.intel.com/p/en_US/support Note2: The Rapid Start Technology is NOT supported by H81 chipset. Installing Intel® SBA: Step 1: BIOS Setting 1-1 Go to [Advanced Menu] > [ACPI Settings], and set [ACPI Sleep State] to S3 (Suspend to RAM) 1-2 Go to [Advanced Menu] > [SATA Configuration], and set [SATA Mode Selection] to AHCI 1-3 Go to [Advanced Menu] and set [Intel(R) Rapid Start Technology] to Enabled 1-4 Save your changes, and then exit the BIOS Setup. Step 2: Operating System Installation Step 3: Installing Intel® Rapid Start Application 3-1 Insert the setup Driver DVD into your optical drive. Click “Intel Rapid Start Technology” to launch the program. 3-2 Below window will pop-out, then click “Create Disk” to star disk partition. After disk partition finished, please click “OK” then system will reboot automatically. 30 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 3-3 After rebooting, the system will setup Intel® Rapid Start Technology automatically. We recommend you restart the system after this installation is complete, Step 4: Configuring Intel® Rapid Start Application Launch the Intel® Rapid Start Technology Manager application from [Start] > [All Programs] > [Intel] or click the icon in the notification area. 31 Motherboard Manual Intel® Small Business Advantage Intel Small Business Advantage (Intel SBA) provides an out-of-the-box hardware-based security and productivity suite designed for the small business user. Software Monitor Software Monitor helps keep critical security software running by monitoring it at the hardware level and alerting the business if there has been an attack. The Software Monitor also maintains an event log that shows status information and any errors generated, so businesses can know what happened. Data Backup and Restore Data Backup and Restore provides reliable after-hours backup of critical data using the local maintenance timer to power on the computer. Data can be backed up to a designated location. USB Blocker The optional USB Blocker lets businesses control access to their infrastructure, preventing unauthorized USB devices or file imports or exports on company computers. PC Health Center PC Health Center can schedule and do PC maintenance tasks after hours, without interrupting employee work time. Tasks such as updating the operating system, deleting temporary internet files, and running disk defragmentation can be done at night. PC Health Center works even if the computer is powered-down, as long as it is plugged in. Energy Saver With the optional Energy Saver, businesses can save energy by scheduling PCs to power-down at the end of the day and turn on before the work day begins - ready for employees as they arrive in the morning. Supported Operating Systems: Windows 7 and Windows 8 Note1: Please visit below webpage for more details about operating systems supporting http://www.intel.com/p/en_US/support Note2: The Intel® Small Business Advantage is only supported by H87 & B85 chipsets. 32 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Installing Intel SBA This procedure describes how to install Intel SBA. 1. Logon to the computer with a user that has administrator privileges. 2. Copy the Setup.exe file to the computer. 3. Double-click Setup.exe. The Welcome to the Setup Program window opens. 4. Click Next. The installer starts the installation and the Setup Progress window opens showing the progress of the installation. When installation is complete, the installer starts the Intel SBA service and the Next button is enabled. 5. 6. Click Next. The Setup Is Complete window opens. Click Finish. The installer closes. 33 Motherboard Manual CHAPTER 4: USEFUL HELP 4.1 Driver Installation After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver DVD. Click on the Manual icon to browse for available manuals. Note1: If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive. Note2: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://get.adobe.com/reader/ 34 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 4.2 AMI BIOS Beep Code Boot Block Beep Codes Number of Beeps Continuing Description Memory sizing error or Memory module not found POST BIOS Beep Codes Number of Beeps 1 8 4.3 Description Success booting. Display memory error (system video adapter) Troubleshooting Probable 1. 2. There is no power in the system. Power LED does not shine; the fan of the power supply does not work Indicator light on keyboard does not shine. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place. System does not boot from a hard disk drive, but can be booted from optical drive. 1. 2. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk. 1. 2. Back up data and applications files. Reformat the hard drive. Re-install applications and data using backup disks. Screen message shows “Invalid Configuration” or “CMOS Failure.” Review system’s equipment. Make sure correct information is in setup. System cannot boot after user installs a second hard drive. 1. 2. Set master/slave jumpers correctly. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives. 35 Motherboard Manual CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. 2. Wait for seconds. 3. Power on the system again. 36 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 4.4 RAID Functions RAID Definitions RAID 0: In a RAID 0 system data are split up in blocks that get written across all the drives in the array. By using multiple disks (at least 2) at the same time, this offers superior I/O performance. This performance can be enhanced further by using multiple controllers, ideally one controller per disk. Features and Benefits Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform. Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance. Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity. Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. Fault Tolerance: No. Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount) RAID 1: Data are stored twice by writing them to both the data disk (or set of data disks) and a mirror disk (or set of disks) . If a disk fails, the controller uses either the data drive or the mirror drive for data recovery and continues operation. You need at least 2 disks for a RAID 1 array. Features and Benefits Drives: Minimum 2, and maximum is 2. Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity. Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive. Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired during drive rebuilds. Fault Tolerance: Yes. 37 Motherboard Manual RAID 10: RAID 10 combines the advantages (and disadvantages) of RAID 0 and RAID 1 in one single system. It provides security by mirroring all data on a secondary set of disks (disk 3 and 4 in the drawing below) while using striping across each set of disks to speed up data transfers. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks. Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1. Fault Tolerance: Yes. RAID 5: A RAID 5 array can withstand a single disk failure without losing data or access to data. Although RAID 5 can be achieved in software, a hardware controller is recommended. Often extra cache memory is used on these controllers to improve the write performance. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service. Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency. Drawbacks: Individual block data transfer rate same as a single disk. Write performance can be CPU intensive. Fault Tolerance: Yes. Note1: The RAID 0,1,10 and 5 functions are only supported by Z87 & H87 chipsets. Note2: For more details settings about Intel® Rapid Storage Technology (Intel® RST), please visit http://www.intel.com/p/en_US/support/highlights/chpsts/imsm 38 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ This Page Intentionally Left Blank 39 Motherboard Manual APPENDIX: Specifications in Other Languages Arabic اﻟﻤﻮاﺻﻔﺎت ﻗﺎﻋﺪة وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ اﻟﻤﺄﺧﺬ 1150ﻟﻤﻌﺎﻟﺞ اﻳﻪ إم دى Intel® Core i7 / i5 / i3 / Pentium / Celeron اﻟﺤﺪ اﻷﻗﺼﻰ ﻟﻠﻄﺎﻗﺔ اﻟﺤﺮارﻳﺔ ﻓﻲ ﺗﺼﻤﻴﻢ اﻟﻤﻌﺎﻟﺞ ) 95 :( thermal design power – TDPواط. * ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ www.biostar.com.twﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﻤﻌﺎﻟﺞ .CPU )INTEL® Z87 (Hi-Fi Z87S3+ )INTEL® B85 (Hi-Fi B85S3+ )INTEL® H87 (Hi-Fi H87S3+ DDR3 1066/ 1333/ 1600ﺗﺪﻋﻢ ﻗﻨﺎة ﻣﺰدوﺟﺔ دي .دي .ار. )DDR3 1800(OC) / 1866(OC) / 2133(OC) / 2200(OCﺗﺪﻋﻢ ﻗﻨﺎة ﻣﺰدوﺟﺔ دي .دي .ار. اﻟﺬاآﺮة )(Hi-Fi Z87S2 4xدي .دي .ار DDR3 .ﻓﺘﺤﺎت اﻟﺬاآﺮة اﻟﻤﺰدوﺟﺔ ،DIMMﺗﺘﺤﻤﻞ آﺤﺪ أﻗﺼﻰ 32ﺟﻴﺠﺎﺑﺎﻳﺖ ذاآﺮة آﻞ ﻓﺘﺤﺔ ﻣﺰدوﺟﺔ DIMMﺗﺘﺤﻤﻞ دون 512 ECCﻣﻴﺠﺎ ﺑﺎﻳﺖ 8/4/2/1/ﺟﻴﺠﺎﺑﺎﻳﺖ دي .دي .ار DDR3 * ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ www.biostar.com.twﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﺬاآﺮة. اﻟﺘﺨﺰﻳﻦ INTEL® Z87 & H87 INTEL® B85 وﺻﻠﺔ 6xﺳﺎﺗﺎ 6 SATAﺟﻴﺠﺎ ﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ وﺻﻠﺔ 4xﺳﺎﺗﺎ 6 SATAﺟﻴﺠﺎ ﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﺗﺘﺤﻤﻞ راﻳﺪ SRT, AHCI, 10 / 5 / 1 / 0 RAID وﺻﻠﺔ 2xﺳﺎﺗﺎ 3 SATAﺟﻴﺠﺎ ﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﺗﺘﺤﻤﻞ راﻳﺪ AHCI ﺷﺒﻜﺔ ﻣﺤﻠﻴﺔ LAN اﻟﺘﺮﻣﻴﺰ اﻟﺼﻮﺗﻲ رﻳﻴﺎﻟﺘﻴﻚ رت ل REALTEK RTL 8111 F 1000 / 100 / 10ﻣﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ،ﺗﺤﺪﻳﺪ ﺗﻠﻘﺎﺋﻲ ،اﻟﻨﺼﻒ /اﻟﻘﺪرة اﻟﻘﺼﻮى اﻟﻤﺰدوﺟﺔ ALC892 7.1ﻗﻨﻮات ﻋﺎﻟﻴﺔ اﻟﺪﻗﺔBiostar Hi-Fi, Hi-Fi Z87S3+ & Hi-Fi H87S3+ ﻣﻨﺎﻓﺬ x 6ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 4 ) 3.0 USBﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و 2ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ ( ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم USB ﻣﻨﺎﻓﺬ x 6ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 2 ) 2.0 USBﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و 4ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ ( Hi-Fi B85S3+ ﻣﻨﺎﻓﺬ x 4ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 2 ) 3.0 USBﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و 2ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ ( ﻣﻨﺎﻓﺬ x 8ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 4 ) 2.0 USBﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و 4ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ ( x 1ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ PCI ﻓﺘﺤﺎت اﻟﺘﻮﺳﻊ x 2ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ 1 x 2.0 PCIe x 1ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ (x16)16 x 3.0 PCIe Hi-Fi Z87S3+ & Hi-Fi H87S3+ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ Hi-Fi B85S3+ PS/2 x 1ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ /اﻟﻤﺎوس PS/2 x 1ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ /اﻟﻤﺎوس ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد HDMI x 1وﺳﻴﻂ ﻣﺘﻌﺪد اﻟﻌﺎﻟﻲ ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد HDMI x 1وﺳﻴﻂ ﻣﺘﻌﺪد اﻟﻌﺎﻟﻲ اﻟﻮﺿﻮح اﻟﻮﺿﻮح ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 1ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض اﻟﻤﺮﺋﻲ VGA ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 1ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض اﻟﻤﺮﺋﻲ VGA ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 1واﺟﻬﺔ ﻣﺮﺋﻴﺔ رﻗﻤﻴﺔ DVI ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 1واﺟﻬﺔ ﻣﺮﺋﻴﺔ رﻗﻤﻴﺔ DVI ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد x 1اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ LAN ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد x 1اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ LAN ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 2.0 USB ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 4ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 2.0 USB ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 4ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 3.0 USB ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم 3.0 USB ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 6ﺟﺎك ﻟﻠﺼﻮت ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد x 6ﺟﺎك ﻟﻠﺼﻮت 40 Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ اﻟﻤﻮاﺻﻔﺎت اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺪاﺧﻠﻴﺔ +Hi-Fi Z87S3+ & Hi-Fi H87S3+ +Hi-Fi B85S3+ وﺻﻠﺔ 6 SATA x 6ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ وﺻﻠﺔ 6 SATA x 4ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﻣﻮزع x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 2.0 USBآﻞ ﻣﻮزع وﺻﻠﺔ 3 SATA x 2ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 2.0 USB ﻣﻮزع x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 2.0 USBآﻞ ﻣﻮزع x 1ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 3.0 USBآﻞ ﻣﻮزع ﻣﻮزع ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 2.0 USB ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 3.0 USB ﻣﻮزع x 1ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 3.0 USBآﻞ وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ 4 x 1دﺑﺎﺑﻴﺲ ﻣﻮزع ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 3.0 USB وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ 24 x 1دﺑﻮس وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ 4 x 1دﺑﺎﺑﻴﺲ وﺻﻠﺔ x 1ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ 24 x 1دﺑﻮس وﺻﻠﺔ x 2ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ وﺻﻠﺔ x 1ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻣﻮزع x 1اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ وﺻﻠﺔ x 2ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ ﻣﻮزع x 1اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻣﻮزع x 1اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ ﻣﻮزع x 1ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ ﻣﻮزع x 1اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻣﻮزع x 1ﻣﺴﺘﻬﻠﻚ IR ﻣﻮزع x 1ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ ﻣﻮزع x 1ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ ﻣﻮزع x 1ﻣﺴﺘﻬﻠﻚ IR وﺻﻠﺔ x 1ﺧﺎرﺟﻴﺔ S/PDIFﺳﻮﻧﻲ ﻓﻴﻠﻴﺒﺲ اﻟﻮاﺟﻬﺔ ﻣﻮزع x 1ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ اﻟﺮﻗﻤﻴﺔ وﺻﻠﺔ x 1ﺧﺎرﺟﻴﺔ S/PDIFﺳﻮﻧﻲ ﻓﻴﻠﻴﺒﺲ ﻣﻮزع x 1ﻓﺘﺤﺔ ﻟﻠﻄﺎﺑﻌﺔ اﻟﻮاﺟﻬﺔ اﻟﺮﻗﻤﻴﺔ ﻣﻮزع x 1ﻓﺘﺤﺔ ﻟﻠﻄﺎﺑﻌﺔ ﻋﺎﻣﻞ اﻟﺸﻜﻞ أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ اﻟﻤﺪﻋﻮﻣﺔ 41 ﻋﺎﻣﻞ ﺷﻜﻞ ﻣﺪد اﻟﺘﻜﻨﻮﻟﻮﺟﻴﺎ اﻟﻤﺘﻘﺪﻣﺔ 244 ، ATXﻣﻢ 230 xﻣﻢ وﻳﻨﺪوز / 7وﻳﻨﺪوز 8 ﺑﻴﻮﺳﺘﺎر BIOSTARﺗﺤﺘﻔﻆ ﺑﺤﻖ إﺿﺎﻓﺔ أو أزﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺗﺸﻐﻴﻞ ﻣﻊ أو ﺑﺪون أﻧﻈﺎر. Motherboard Manual French Spécifications Socket 1150 Processeurs Intel® Core i7 / i5 / i3 / Pentium / Celeron Support Unité Enveloppe thermique Unité Centrale maximum : 95Watt Centrale * Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles d'Unité Centrale. Jeu de puces INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Supporte mémoire DDR3 double canal 1066/ 1333/ 1600 Supporte mémoire DDR3 double canal 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Mémoire (Hi-Fi Z87S3+ ) Banc de mémoire 4 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 32 GB Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8 GB * Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la mémoire. Stockage INTEL® Z87 & H87: INTEL® B85: Connecteur 6 x SATA 6Gb/s Connecteur 4 x SATA 6Gb/s Supporte système RAID 0,1,10,5, SRT & Connecteur 2 x SATA 3Gb/s AHCI Supporte système AHCI Realtek RTL 8111F Réseau local 10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle simultanée Codec audio ALC892 Canaux 7.1, écoute audio de haute définition, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: Port 6x USB 3.0 (4 sur les I/O arrières et 2 en interne) USB Port 6x USB 2.0 (2 sur les I/O arrières et 4 en interne) Hi-Fi B85S3+: Port 4x USB 3.0 (2 sur les I/O arrières et 2 en interne) Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne) Connecteur d’extension I/O arrirèes 42 1x PCI Fente 2x PCIe 2.0 x1 Fente 1x PCIe 3.0 x16 Fente (x16) Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: 1x PS/2 Souris/Clavier 1x PS/2 Souris/Clavier 1x Port HDMI 1x Port HDMI 1x Port VGA 1x Port VGA 1x Port DVI 1x Port DVI 1x port LAN 1x port LAN 2x Port USB 2.0 4x Port USB 2.0 4x Port USB 3.0 2x Port USB 3.0 6x entrées audio 6x entrées audio Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Spécifications Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x Connecteur SATA 6.0Gb/s 4x Connecteur SATA 6.0Gb/s 2x embases USB 2.0 2x Connecteur SATA 3.0Gb/s (chaque embase supporte 2 Ports USB 2.0) 2x embases USB 2.0 1x embase USB 3.0 (chaque embase supporte 2 Ports USB 2.0) (chaque embase supporte 2 Ports USB 3.0) 1x embase USB 3.0 I/O en interne 1x 4-Broche de carte (chaque embase supporte 2 Ports USB 3.0) 1x 24-Broche de carte 1x 4-Broche de carte 1x Connecteur ventilateur unité centrale 1x 24-Broche de carte 2x Connecteur ventilateur système 1x Connecteur ventilateur unité centrale 1x Fiche panneau avant 2x Connecteur ventilateur système 1x Fiche audio avant 1x Fiche panneau avant 1x Fiche mémoire CMOS vide 1x Fiche audio avant 1x Fiche Registre d’état Consommateur 1x Fiche mémoire CMOS vide 1x Embase port série 1x Fiche Registre d’état Consommateur 1x Connecteur sortie S/PDIF 1x Embase port série 1x Embase port imprimante 1x Connecteur sortie S/PDIF 1x Embase port imprimante Facteur d'encombrement Facteur d'encombrement ATX, 244 mm x 230 mm Windows 7/ 8 Support SE Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans préavis. 43 Motherboard Manual German Spezifikationen Anschluss-1150 für Intel® Core i7 / i5 / i3 / Pentium / Celeron Prozessor CPU-Unterstützung Maximale CPU TDP (Thermal Design Power): 95 Watt * Bitte konsultieren Sie www.biostar.com.tw für CPU-Unterstützungsliste Chipset INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Unterstützt zweikanaliges DDR3 1066/ 1333/ 1600 Unterstützt zweikanaliges DDR3 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Festplattenspeicher (Hi-Fi Z87S3+) 4 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 32 GB-Speicher Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3-Module * Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste. Arbeitsspeicher INTEL® Z87 & H87: INTEL® B85: 6x SATA 6Gb-Verbindung 4x SATA 6Gb-Verbindung Unterstützt RAID 0,1,10,5, SRT & AHCI 2x SATA 3Gb-Verbindung Unterstützt AHCI LAN Audio-Codec Realtek RTL 8111F 10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig ALC892 7.1 Kanäle, HD-Audio, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: 6x USB 3.0-Port (4 hintere I/Os und 2 via interne Header) USB 6x USB 2.0-Port (2 hintere I/Os und 4 via interne Header) Hi-Fi B85S3+: 4x USB 3.0-Port (2 hintere I/Os und 2 via interne Header) 8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header) Erweiterungsanschl üsse Hintere I/Os 44 1x PCI-Slot 2x PCIe 2.0 x1-Slot 1x PCIe 3.0 x16-Slot (x16) Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: 1x PS/2-Maus/Keyboard 1x PS/2-Maus/Keyboard 1x HDMI-Port 1x HDMI-Port 1x VGA-Port 1x VGA-Port 1x DVI-Port 1x DVI-Port 1x LAN-Port 1x LAN-Port 2x USB 2.0-Port 4x USB 2.0-Port 4x USB 3.0-Port 2x USB 3.0-Port 6x Audio Jack 6x Audio Jack Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Spezifikationen Interne I/Os Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x SATA 6.0Gb/s-Verbinung 4x SATA 6.0Gb/s-Verbinung 2x USB 2.0-Header 2x SATA 3.0Gb/s-Verbinung (jeder Header unterstützt 2 USB 2.0-Ports) 2x USB 2.0-Header 1x USB 3.0-Header (jeder Header unterstützt 2 USB 2.0-Ports) (jeder Header unterstützt 2 USB 3.0-Ports) 1x USB 3.0-Header 1x 4-Pin-Stromverbindung (jeder Header unterstützt 2 USB 3.0-Ports) 1x 24-Pin-Stromverbindung 1x 4-Pin-Stromverbindung 1x CPU-Ventilatorverbindung 1x 24-Pin-Stromverbindung 2x System-Ventilatorverbindung 1x CPU-Ventilatorverbindung 1x Header für Frontpanel 2x System-Ventilatorverbindung 1x Header für Frontaudio 1x Header für Frontpanel 1x Header für klares CMOS 1x Header für Frontaudio 1x Consumer IR-Header 1x Header für klares CMOS 1x Serieller Port-Header 1x Consumer IR-Header 1x S/PDI-Auswurfsverbindung 1x Serieller Port-Header 1x Header für Druckeranschluss 1x S/PDI-Auswurfsverbindung 1x Header für Druckeranschluss Formfaktor OS-Unterstützung ATX Formfaktor, 244 mm x 230 mm Windows 7/ 8 Biostar reserves the right to add or remove support for any OS with or without notice. 45 Motherboard Manual Italian Specificazioni Supporto processore Tipo scheda Slot 1150 per processore Intel® Core i7 / i5 / i3 / Pentium / Celeron Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 95Watt * Si prega di consultare www.biostar.com.tw per la lista di supporto del processore. INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Supporta DDR3 1066/ 1333/ 1600 Doppio Canale Supporta DDR3 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Doppio Canale Memoria (Hi-Fi Z87S3+) 4 x DDR3 DIMM Slot di Memoria Supporta fino a 32 GB Memoria Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 moduli * Si prega di consultare www.biostar.com.tw per la lista di supporto del memoria. Memorizzazione INTEL® Z87 & H87: INTEL® B85: Connettore 6x SATA 6Gb/s Connettore 4x SATA 6Gb/s Supporta RAID 0,1,10,5, SRT & AHCI Connettore 2x SATA 3Gb/s Supporta AHCI Catena Codec Audio Realtek RTL 8111F 10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo ALC892 Canali Audio di Alta Definizione 7.1, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: Slot 6x USB 3.0 (4 nei ingressi/ uscite posteriore e 2 da distributori interni) USB Slot 6x USB 2.0 (2 nei ingressi/ uscite posteriore e 4 da distributori interni) Hi-Fi B85S3+: Slot 4x USB 3.0 (2 nei ingressi/ uscite posteriore e 2 da distributori interni) Slot 8x USB 2.0 (4 nei ingressi/ uscite posteriore e 4 da distributori interni) Slot 1x PCI Slot di espansione Slot 2x PCIe 2.0 x1 Slot 1x PCIe 3.0 x16 (x16) Ingressi/ Uscite Posteriore 46 Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: Tastiera / Mouse 1x PS/2 Tastiera / Mouse 1x PS/2 Slot 1x HDMI Slot 1x HDMI Slot 1x VGA Slot 1x VGA Slot 1x DVI Slot 1x DVI Slot 1x LAN Slot 1x LAN Slot 4x USB 2.0 Slot 2x USB 2.0 Slot 2x USB 3.0 Slot 4x USB 3.0 Jack audio 6x Jack audio 6x Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Specificazioni Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Connettore 6x SATA 6.0Gb/s Connettore 4x SATA 6.0Gb/s Distributore 2x USB 2.0 Connettore 2x SATA 3.0Gb/s (ogni distributore supporta 2 slot USB 2.0) Distributore 2x USB 2.0 Distributore 1x USB 3.0 (ogni distributore supporta 2 slot USB 2.0) (ogni distributore supporta 2 slot USB 3.0) Distributore 1x USB 3.0 Connettore con 4 pin x1 (ogni distributore supporta 2 slot USB 3.0) Connettore con 24 pin x1 Connettore con 4 pin x1 Ingressi/ Uscite Connettore Ventilatore processore x1 Connettore con 24 pin x1 Interni Connettore Ventilatore Sistema x2 Connettore Ventilatore processore x1 Distributore Pannello Frontale x1 Connettore Ventilatore Sistema x2 Distributore Audio Frontale x1 Distributore Pannello Frontale x1 Distributore CMOS Diretto x1 Distributore Audio Frontale x1 Distributore Consumabile IR x1 Distributore CMOS Diretto x1 Distributore Slot Serie x1 Distributore Consumabile IR x1 Connettore esterno S/PDIF x1 Distributore Slot Serie x1 Distributore Slot Stampante x1 Connettore esterno S/PDIF x1 Distributore Slot Stampante x1 Fattore di Forma Fattore di Forma ATX, 244 mm x 230 mm Windows 7/ 8 Supporto SO Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o senza preavviso. 47 Motherboard Manual Japanese 仕様 Intel® Core i7 / i5 / i3 / Pentium / Celeron プロセッサの Socket 1150 CPU サポート 最大 CPU TDP （Thermal Design Power 最大放熱量）:95 W *CPU サポート リストについては、www.biostar.com.twを参照してください。 チップセット INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) デュアルチャンネル1066/ 1333/ 1600 をサポート デュアルチャンネル1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) をサポート (Hi-Fi Z87S3+) メモリ 4 x DDR3 DIMM メモリ スロット、 最大 32 GB メモリまでサポート 各 DIMM は、非-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 モジュールをサポートしています *サポートされているメモリのリストについては、www.biostar.com.twを参照してくだ さい。 保存スペース INTEL® Z87 & H87: INTEL® B85: 6x SATA 6Gb/s コネクタ 4x SATA 6Gb/s コネクタ RAID 0,1,10,5, SRT & AHCI のサポート 2x SATA 3Gb/s コネクタ AHCI のサポート LAN Realtek RTL 8111F 10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信 オーディオ コーデ ALC892 ック 7.1 チャンネル, ハイ デフィニション オーディオ, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: 6x USB 3.0 ポート (後部 I/O に4つ 及び 内蔵 ヘッダー経由に2つ) USB 6x USB 2.0 ポート (後部 I/O に2つ 及び 内蔵 ヘッダー経由に4つ Hi-Fi B85S3+: 4x USB 3.0 ポート (後部 I/O に2つ 及び 内蔵 ヘッダー経由に2つ) 8x USB 2.0 ポート (後部 I/O に4つ 及び 内蔵ヘッダー経由に4つ) 1x PCI スロット 拡張スロット 2x PCIe 2.0 x1 スロット 1x PCIe 3.0 x16 スロット(x16) 後部 I/O 48 Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: 1x PS/2 マウス/キーボード 1x PS/2 マウス/キーボード 1x HDMI ポート 1x HDMI ポート 1x VGA ポート 1x VGA ポート 1x DVI ポート 1x DVI ポート 1x LAN ポート 1x LAN ポート 2x USB 2.0 ポート 4x USB 2.0 ポート 4x USB 3.0 ポート 2x USB 3.0 ポート 6x オーディオ ジャック 6x オーディオ ジャック Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 仕様 Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x SATA 6.0Gb/s コネクタ 4x SATA 6.0Gb/s コネクタ 2x USB 2.0 ヘッダー 2x SATA 3.0Gb/s コネクタ (各ヘッダーは、2つの USB 2.0 ポートを 2x USB 2.0 ヘッダー サポートしています) (各ヘッダーは、2つの USB 2.0 ポートをサポ 1x USB 3.0 ヘッダー ートしています) (各ヘッダーは、2つの USB 3.0 ポートを 1x USB 3.0 ヘッダー 内蔵 I/O サポートしています) (各ヘッダーは、2つの USB 3.0 ポートをサポ 1x 4-Pin パワー コネクタ ートしています) 1x 24-Pin パワー コネクタ 1x 4-Pin パワー コネクタ 1x CPU ファン コネクタ 1x 24-Pin パワー コネクタ 2x システム ファン コネクタ 1x CPU ファン コネクタ 1x フロント パネル ヘッダー 2x システム ファン コネクタ 1x フロント オーディオ ヘッダー 1x フロント パネル ヘッダー 1x クリア CMOS ヘッダー 1x フロント オーディオ ヘッダー 1x コンシューマー IR ヘッダー 1x クリア CMOS ヘッダー 1x シリアル ポート ヘッダー 1x コンシューマー IR ヘッダー 1x S/PDIF アウト コネクタ 1x シリアル ポート ヘッダー 1x プリンター ポート ヘッダー 1x S/PDIF アウト コネクタ 1x プリンター ポート ヘッダー フォーム ファクタ サポート OS ATX フォーム ファクタ、244 mm x 230 mm Windows 7/ 8 Biostar には、通知なしでサポート OS を変更する権限があります。 49 Motherboard Manual Polish Specyfikacje techniczne Gniazdo procesora (Socket) 1150 dla procesorów Intel® Core i7 / i5 / i3 / Pentium / Celeron Obsługa procesora Moc Wydzielanego Ciepła (TDP - Thermal Design Power): 95Watt * Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej www.biostar.com.tw Rodzaj płyty INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Obsługa pamięci DDR3 1066/ 1333/ 1600 Dwukanałowa Obsługa pamięci 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Dwukanałowa (Hi-Fi Z87S3+) Pamięć 4 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość pamięci 32 GB Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 * Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej www.biostar.com.tw Przechowywanie INTEL® Z87 & H87: INTEL® B85: Złącze 6x SATA 6Gb/s Złącze 4x SATA 6Gb/s Obsługa RAID 0,1,10,5, SRT & AHCI Złącze 2x SATA 3Gb/s Obsługa AHCI LAN Codec Audio Układ RTL 8111F 10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny ALC892 Kanały Audio wysokiej Definicji 7.1, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: 6 x złącza USB 3.0 (4 przez tylne porty wejścia/ wyjścia oraz 2 przez wewnętrzne porty) USB 6 x złącza USB 2.0 (2 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty) Hi-Fi B85S3+: 4 x złącza USB 3.0 (2 przez tylne porty wejścia/ wyjścia oraz 2 przez wewnętrzne porty) 8 x złącza USB 2.0 (4 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty) złącze 1x PCI (Slot) Złącza rozszerzeń złącze 2x PCIe 2.0 x1 (Slot) złącza 1x PCIe 3.0 x16 (Slot) (x16) Tylne porty wejścia/ wyjścia 50 Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: Klawiatura / Myszka 1x PS/2 Klawiatura / Myszka 1x PS/2 Port 1x HDMI (gniazdo) Port 1x HDMI (gniazdo) Port 1x VGA Port 1x VGA Port 1x DVI Port 1x DVI Port 1x LAN Port 1x LAN Porty 2x USB 2.0 Porty 4x USB 2.0 Porty 4x USB 3.0 Porty 2x USB 3.0 Porty audio 6x Porty audio 6x Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Specyfikacje techniczne Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Złącza 6x SATA 6.0Gb/s Złącza 4x SATA 6.0Gb/s Złącza 2x USB 2.0 Złącza 2x SATA 3.0Gb/s (każde złącze obsługuje dodatkowe 2 Złącza 2x USB 2.0 porty USB 2.0) (każde złącze obsługuje dodatkowe 2 porty Złącze 1x USB 3.0 USB 2.0) (każde złącze obsługuje dodatkowe 2 Złącze 1x USB 3.0 porty USB 3.0) (każde złącze obsługuje dodatkowe 2 porty Złącza 4 pionowe x 1 USB 3.0) Wewnętrzne porty Złącza 24 pionowe x 1 Złącza 4 pionowe x 1 wejścia/ wyjścia Złącze wentylatora CPU x 1 Złącza 24 pionowe x 1 Złącze wentylatora obudowy x 2 Złącze wentylatora CPU x 1 Złącze przedniego panelu x1 Złącze wentylatora obudowy x 2 Złącze audio przedniego panelu x1 Złącze przedniego panelu x1 Złącze bezpośrednie CMOS x1 Złącze audio przedniego panelu x1 Złącze konsument IR x1 Złącze bezpośrednie CMOS x1 Port szeregowy x1 Złącze konsument IR x1 Port zewnętrzny S/PDIF x1 Port szeregowy x1 Złącze port drukarki x1 Port zewnętrzny S/PDIF x1 Złącze port drukarki x1 Obudowa Obudowa ATX, 244 mm x 230 mm Windows 7/ 8 Obsługa OS Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z wypowiedzeniem lub bez wypowiedzenia. 51 Motherboard Manual Portuguese Especificações Porta 1150 para processador Intel® Core i7 / i5 / i3 / Pentium / Celeron Suporte Processador Alimentação de Design Térmico (TDP – Thermal Design Power): 95Watt * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do processador. Tipo Placa Mãe INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Suporta DDR3 1066/ 1333/ 1600 Canal Duplo Suporta DDR3 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Canal Duplo Memória (Hi-Fi Z87S3+) 4 x DDR3 DIMM Slot de memória Suporta até 32 GB Memória Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 módulo * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do memória. Armazenamento INTEL® Z87 & H87: INTEL® B85: Conector 6x SATA 6Gb/s Conector 4x SATA 6Gb/s Suporta RAID 0,1,10, 5, SRT & AHCI Conector 2x SATA 3Gb/s Suporta AHCI LAN Codec de Audio Realtek RTL 8111F 10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio ALC892 Canais de Áudio de Alta Definição 7.1, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: Porta 6x USB 3.0 (4 nas entradas/saídas traseiras e 2 pelos Dispositivos internos) USB Porta 6x USB 2.0 (2 nas entradas/saídas traseiras e 4 pelos Dispositivos internos) Hi-Fi B85S3+: Porta 4x USB 3.0 (2 nas entradas/saídas traseiras e 2 pelos Dispositivos internos) Porta 8x USB 2.0 (4 nas entradas/saídas traseiras e 4 pelos Dispositivos internos) Porta 1x PCI Slots de expansão Porta 2x PCIe 2.0 x1 Porta 1x PCIe 3.0 x16 (x16) Entradas/Saídas no painel traseiro 52 Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: Teclado / Mouse 1x PS/2 Teclado / Mouse 1x PS/2 Porta 1x HDMI Porta 1x HDMI Porta 1x VGA Porta 1x VGA Porta 1x DVI Porta 1x DVI Porta 1x LAN Porta 1x LAN Porta 2x USB 2.0 Porta 4x USB 2.0 Porta 4x USB 3.0 Porta 2x USB 3.0 Soquete audio 6x Soquete audio 6x Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Especificações Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Conector 6x SATA 6.0Gb/s Conector 4x SATA 6.0Gb/s Dispositivo 2x USB 2.0 (cada Dispositivo Conector 2x SATA 3.0Gb/s suporta 2 portas USB 2.0) Dispositivo 2x USB 2.0 (cada Dispositivo Dispositivo 1x USB 3.0 (cada Dispositivo suporta 2 portas USB 2.0) suporta 2 portas USB 3.0) Dispositivo 1x USB 3.0 (cada Dispositivo Conector de 4 pinos x1 suporta 2 portas USB 3.0) Conector de 24 pinos x1 Conector de 4 pinos x1 Conectores na Conector de Ventoinha processador x1 Conector de 24 pinos x1 placa Conector de Ventoinha Sistema x2 Conector de Ventoinha processador x1 Dispositivo Painel Frontal x1 Conector de Ventoinha Sistema x2 Dispositivo de Audio Frontal x1 Dispositivo Painel Frontal x1 Dispositivo CMOS Direct x1 Dispositivo de Audio Frontal x1 Dispositivo Consumível IR x1 Dispositivo CMOS Direct x1 Dispositivo Porta Série x1 Dispositivo Consumível IR x1 Conector Externo S/PDIF x1 Dispositivo Porta Série x1 Dispositivo Porta Impressora x1 Conector Externo S/PDIF x1 Dispositivo Porta Impressora x1 Fator de Fôrma Fator de Fôrma ATX, 244 mm x 230 mm Windows 7/ 8 Suporte OS Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem notificação. 53 Motherboard Manual Russian Спецификации Поддержка Сокет 1150 для процессоров Intel® Core i7 / i5 / i3 / Pentium / Celeron центрального Максимальный термопакет центрального процессора (TDP): 95 ватт процессора * Перечень поддержки центрального процессора смотрите на www.biostar.com.tw. Набор микросхем INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Поддерживает двухканальный 1066/ 1333/ 1600 Поддерживает двухканальный 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Память (Hi-Fi Z87S3+) 4 гнезда платы памяти DDR3 DIMM, максимальная память до 32 Гб Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8 Гб DDR3 * Перечень поддержки памяти смотрите на www.biostar.com.tw. Накопитель INTEL® Z87 & H87: INTEL® B85 Соединитель 6x SATA 6 Гб/с Соединитель 4x SATA 6 Гб/с Поддерживает RAID 0,1,10,5, SRT & AHCI Соединитель 2x SATA 3 Гб/с Поддерживает AHCI Локальная сеть Аудиокодек Realtek RTL 8111F Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном режиме ALC892 Каналы 7.1, высококачественное аудио, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: 6 порта USB 3.0 (4 сзади ввода-вывода и 2 через внутренние контакты) USB 6 порта USB 2.0 (2 сзади ввода-вывода и 4 через внутренние контакты) Hi-Fi B85S3+: 4 порта USB 3.0 (2 сзади ввода-вывода и 2 через внутренние контакты) 8 порта USB 2.0 (4 сзади ввода-вывода и 4 через внутренние контакты) 1x PCI гнездо Гнезда расшир. 2x PCIe 2.0 x1 гнездо 1x PCIe 3.0 x16 гнездо (x16) Задняя плата ввода-вывода 54 Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: 1 мышь/ клавиатура PS/2 1 мышь/ клавиатура PS/2 1 порт HDMI 1 порт HDMI 1 порт VGA 1 порт VGA 1 порт DVI 1 порт DVI 1 порт локальной сети 1 порт локальной сети 2 порта USB 2.0 4 порта USB 2.0 4 порта USB 3.0 2 порта USB 3.0 6 гнезд для подключения наушников 6 гнезд для подключения наушников Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Спецификации Внутр. Плата ввода-вывода Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Соединитель 6x SATA 6 Гб/с Соединитель 4x SATA 6 Гб/с 2 контакта USB 2.0 (каждый контакт Соединитель 2x SATA 3 Гб/с поддерживает 2 порта USB 2.0) 2 контакта USB 2.0 (каждый контакт 1 контакт USB 3.0 (каждый контакт поддерживает 2 порта USB 2.0) поддерживает 2 порта USB 3.0) 1 контакт USB 3.0 (каждый контакт 1 4-выводный разъем питания поддерживает 2 порта USB 3.0) 1 24-выводный разъем питания 1 4-выводный разъем питания 1 разъем вентилятора ЦП 1 24-выводный разъем питания 2 разъема вентилятора системы 1 разъем вентилятора ЦП 1 контакт передней панели 2 разъема вентилятора системы 1 контакт передней аудиопанели 1 контакт передней панели 1 контакт микросхемы Clear CMOS 1 контакт передней аудиопанели 1 инфракрасный пользовательский 1 контакт микросхемы Clear CMOS контакт 1 инфракрасный пользовательский 1 контакт последовательного порта контакт 1 соединитель S/PDIF-Out 1 контакт последовательного порта 1 контакт порта принтера 1 соединитель S/PDIF-Out 1 контакт порта принтера Конструктив Форм-фактор ATX, 244 мм x 230 мм Windows 7/ 8 Поддержка ОС Biostar оставляет за собой право добавлять или удалять поддержку любой ОС, с уведомлением или без. 55 Motherboard Manual Spanish Especificaciones Ranura 1150 para procesador Intel® Core i7 / i5 / i3 / Pentium / Celeron Compatibilidad con Alimentación de Proyección Térmica (TDP – Thermal Design Power): 95Watt el procesador *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el procesador. Tipo de Placa INTEL® Z87 (Hi-Fi Z87S3+) INTEL® B85 (Hi-Fi B85S3+) INTEL® H87 (Hi-Fi H87S3+) Soporta DDR3 1066/ 1333/ 1600 Doble Canal Soporta DDR3 1800(OC) / 1866(OC) / 2133(OC) / 2200(OC) Doble Canal (Hi-Fi Z87S3+) Memoria 4x DDR3 DIMM Ranura de memoria Soporta hasta 32 GB Memoria Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el memoria. INTEL® Z87 & H87: INTEL® B85: Almacenamiento Conector 6x SATA 6Gb/s Conector 4x SATA 6Gb/s de información Soporta RAID 0,1,10,5, SRT & AHCI Conector 2x SATA 3Gb/s Soporta AHCI LAN Códec Audio Realtek RTL 8111F 10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo ALC892 Canales Audio de Alta Definición 7.1, Biostar Hi-Fi Hi-Fi Z87S3+ & Hi-Fi H87S3+: Ranura 6x USB 3.0 (4 en las entrada/salidas posteriores y 2 por los distribuidores internos) Ranura 6x USB 2.0 (2 en las entrada/salidas posteriores y 4 por los distribuidores USB internos) Hi-Fi B85S3+: Ranura 4x USB 3.0 (2 en las entrada/salidas posteriores y 2 por los distribuidores internos) Ranura 8x USB 2.0 (4 en las entrada/salidas posteriores y 4 por los distribuidores internos) Ranuras de Extinción Panel trasero de E/S 56 Ranura 1x PCI Ranura 2x PCIe 2.0 x1 Ranura 1x PCIe 3.0 x16 (x16) Hi-Fi Z87S3+ & Hi-Fi H87S3+: Hi-Fi B85S3+: Teclado/Ratón 1x PS/2 Teclado/Ratón 1x PS/2 Ranura 1x HDMI Ranura 1x HDMI Ranura 1x VGA Ranura 1x VGA Ranura 1x DVI Ranura 1x DVI Ranura 1x LAN Ranura 1x LAN Ranura 2x USB 2.0 Ranura 4x USB 2.0 Ranura 4x USB 3.0 Ranura 2x USB 3.0 Socket audio 6x Socket audio 6x Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Especificaciones Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Conector 6x SATA 6Gb’s Conector 4x SATA 6Gb’s Distribuidor 2x USB 2.0 (cada distribuidor Conector 2x SATA 3Gb’s soporta 2 ranuras USB 2.0) Distribuidor 2x USB 2.0 (cada distribuidor Distribuidor 1x USB 3.0 (cada distribuidor soporta 2 ranuras USB 2.0) soporta 2 ranuras USB 3.0) Distribuidor 1x USB 3.0 (cada distribuidor Conector con 4 patillas x1 soporta 2 ranuras USB 3.0) Conector con 24 patillas x1 Conector con 4 patillas x1 Conectores en Conector Ventilador procesador x1 Conector con 24 patillas x1 placa Conector Ventilador Sistema x2 Conector Ventilador procesador x1 Distribuidor Panel Frontal x1 Conector Ventilador Sistema x2 Distribuidor Audio Frontal x1 Distribuidor Panel Frontal x1 Distribuidor CMOS Directo x1 Distribuidor Audio Frontal x1 Distribuidor Consumible IR x1 Distribuidor CMOS Directo x1 Distribuidor Ranura Serie x1 Distribuidor Consumible IR x1 Conector Externo S/PDIF x1 Distribuidor Ranura Serie x1 Distribuidor Ranura Impresora x1 Conector Externo S/PDIF x1 Distribuidor Ranura Impresora x1 Factor de Forma Factor de Forma ATX, 244 mm x 230 mm Windows 7/ 8 Soporte OS Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin notificación. 2013/05/07 57
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2013:05:07 15:48:31+08:00 Modify Date : 2013:05:07 15:48:31+08:00 Page Count : 59 Creation Date : 2013:05:07 07:48:31Z Mod Date : 2013:05:07 07:48:31Z Producer : Acrobat Distiller 5.0 (Windows) Author : 101001 Metadata Date : 2013:05:07 07:48:31Z Creator : 101001 Title : Microsoft Word - IZ87B-MHS & IH87B-MHS & IB85B-MHS_130507.docEXIF Metadata provided by EXIF.tools