Biostar Hi Fi H77S Owners Manual IZ77G AHT & IH77G AHT_130423

2014-07-31

: Biostar Biostar-Hi-Fi-H77S-Owners-Manual biostar-hi-fi-h77s-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 69

Download
Open PDF In Browser	View PDF

Hi-Fi Z77S/Hi-Fi H77S Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili

Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied

Table of Contents
Chapter 1: Introduction.......................................... 1
1.1
1.2
1.3
1.4
1.5

Before You Start.........................................................................................1
Package Checklist .....................................................................................1
Motherboard Features..............................................................................2
Rear Panel Connectors..............................................................................4
Motherboard Layout.................................................................................5

2.1
2.2
2.3
2.4

Installing Central Processing Unit (CPU) ...............................................6
FAN Headers..............................................................................................8
Installing System Memory ........................................................................9
Connectors and Slots................................................................................11

3.1
3.2

How to Setup Jumpers ............................................................................15
Detail Settings..........................................................................................15

4.1
4.2
4.3
4.4

Operating System ....................................................................................20
Raid Arrays ..............................................................................................21
How RAID Works.....................................................................................22
Intel Smart Response Technology ..........................................................26

5.1
5.2
5.3

UEFI BIOS..................................................................................................27
Software....................................................................................................30
BIOS Update.............................................................................................39

6.1
6.2
6.3
6.4

Driver Installation Note..........................................................................44
Extra Information....................................................................................45
AMI BIOS Post Code ................................................................................46
Troubleshooting .......................................................................................48

Chapter 2: Hardware Installation ........................... 6

Chapter 3: Headers & Jumpers Setup ................... 15
Chapter 4: RAID / AHCI Functions ....................... 20

Chapter 5: UEFI BIOS & Software ........................ 27

Chapter 6: Useful Help ......................................... 44

Appendix: SPEC In Other Languages .................... 50
German .................................................................................................................50
French....................................................................................................................52
Italian ....................................................................................................................54
Spanish ..................................................................................................................56
Portuguese............................................................................................................58
Polish .....................................................................................................................60
Russian ..................................................................................................................62
Arabic ....................................................................................................................64
Japanese................................................................................................................66

Hi-Fi Z77S /H i-Fi H77S

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.

Always disconnect the computer from power outlet
before operation.

Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.

Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat
source, humid air and water.

The operating temperatures of the computer should be
0 to 45 degrees Celsius.

PACKAGE CHECKLIST
Serial ATA Cable x4
Rear I/O Panel for ATX Case x1
User’s Manual x1
Fully Setup Driver DVD x1

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
Supports Execute Disable Bit / Enhanced Intel
Socket 1155

CPU

SpeedStep® / Intel Architecture-64 / Extended
Intel Core i7 / i5 / i3 / Pentium / Celeron
Memory 64 Technology / Virtualization Technology /
processor (TDP: 95W)
Hyper Threading

Chipset

Super I/O

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
IT8728F

Environment Control initiatives,

Provides the most commonly used legacy

Hardware Monitor Controller

Super I/O functionality.

Fan Speed Controller

Low Pin Count Interface

ITE's "Smart Guardian" function
Dual Channel Mode DDR3 memory module

DDR3 DIMM Slots x 4
Main

Max Memory Capacity 32GB

Memory

Each DIMM supports 512MB/

Supports DDR3 1066 / 1333 / 1600
Supports DDR3(OC) 1800/2000/2200/2400/2600
Supports DDR3(OC) 1866/2133 (for Hi-Fi Z77S)

1GB/2GB/4GB/8GB DDR3

Registered DIMM and ECC DIMM is not supported
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.

SATA 2 & 3 Integrated Serial ATA Controller

SATA Version 2.0 / 3.0 specification compliant
RAID 0,1,5,10, SRT support

LAN

10 / 100 Mb/s / 1Gb/s auto negotiation
Realtek RTL 8111F
Half / Full duplex capability

Sound
Codec
USB3.0

7.1 channels audio out
ALC892
High Definition Audio, Biostar Hi-Fi
Z77/ H77

Data transfer rates up to 600 MB/s

PCI slot

Supports PCI expansion cards

PCI Express Gen3 x 16 slot

Supports PCI-E Gen3 x16 expansion card

PCI Express Gen2 x 16 slot(x4)

Supports PCI-E Gen2 x16 expansion card

PCI Express Gen2 x 1 slot

Supports PCI-E Gen2 x1 expansion cards

Slots

Hi-Fi Z77S /H i-Fi H77S
SPEC
SATA3 Connector

Each connector supports 1 SATA3 devices

SATA2 Connector

Each connector supports 1 SATA2 devices

Front Panel Connector

Supports front panel facilities

Front Audio Connector

Supports front panel audio function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

Clear CMOS Header

Restore CMOS data to factory default

USB2.0 Connector

Each connector supports 2 front panel USB2.0 ports

USB3.0 Connector

Each connector supports 2 front panel USB3.0 ports

Consumer IR Connector

Supports infrared function

Serial Port Connector

Connects to RS-232 Port

S/PDIF out Connector

Supports digital audio out function

Power Connector (24pin)

Connects to Power supply

Power Connector (8pin)

Connects to Power supply

PS/2 Keyboard/ Mouse

Connects to PS/2 Keyboard/ Mouse

HDMI Port

Connects to HDMI cable

VGA Port

Connect to D-SUB monitor

Back Panel DVI Port

Connect to DVI monitor

I/O

LAN port

Connect to RJ-45 ethernet cable

USB2.0 Port

Connect to USB2.0 devices

USB3.0 Port

Connect to USB3.0 devices

Audio Jack

Provide Audio-In/Out and Mic. connection

On Board
Connectors

Board Size 220 (W) x 305 (L) mm

OS Support Windows XP / Vista / 7 / 8

ATX
Biostar reserves the right to add or remove support
for any OS with or without notice

Motherboard Manual

1.4

REAR PANEL CONNECTORS

Note1:

HDMI, DVI-D & VGA ports only work with an Intel integrated Graphics Processor

Note2:

USB3.0 ports (only supported by Windows 7/8) are backward compatible with
USB2.0/USB1.X devices.

Note3:

Maximum resolution:
HDMI: 1920 x 1200 @60Hz, compliant with HDMI 1.4a
DVI: 1920 x 1200 @60Hz
VGA: 2048 x 1536 @75Hz

Note4:

This motherboard supports dual video output:
Display Devices

VGA

DVI-D

VGA

DVI-D

HDMI

Hi-Fi Z77S /H i-Fi H77S

1.5

MOTHERBOARD LAYOUT

Note: ■ represents the 1 pin.
5

Motherboard Manual

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Notice:
1. Remove Pin Cap before installation, and make good preservation for future use. When the
CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be
damaged.
2. The motherboard might equip with two different types of pin cap. Please refer below
instruction to remove the pin cap.

Step 1: Pull the socket locking lever out from the socket and then raise
the lever up.

Step 2: Remove the Pin Cap.

Hi-Fi Z77S /H i-Fi H77S
Step 3: Hold processor with your thumb and index fingers, oriented as
shown. Align the notches with the socket. Lower the processor
straight down without tilting or sliding the processor in the socket.

Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.

Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.

Motherboard Manual

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header
Pin
1
2
3
4

Assignment
Ground
+12V
FAN RPM rate sense
Smart Fan Control

SYS_FAN1/SYS_FAN2: System Fan Headers
Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate sense

Note:
The SYS_FAN1/SYS_FAN2 support 3-pin head connectors; the CPU_FAN1 supports 4-pin head
connector. When connecting with wires onto connectors, please note that the red wire is the
positive and should be connected to pin#2, and the black wire is Ground and should be
connected to GND.

Hi-Fi Z77S /H i-Fi H77S

2.3

INSTALLING SYSTEM MEMORY

A. Memory Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Motherboard Manual
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

B. Memory Capacity
DIMM Socket
Location

DDR3 Module

DDR3_A1

512MB/1GB/2GB/4GB/8GB

DDR3_A2

512MB/1GB/2GB/4GB/8GB

DDR3_B1

512MB/1GB/2GB/4GB/8GB

DDR3_B2

512MB/1GB/2GB/4GB/8GB

Total Memory
Size

Max is 32GB.

C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled

Enabled

(O means memory installed, X means memory not installed.)
Note: The DRAM bus width of the memory module must be the same (x8 or x16)

Hi-Fi Z77S /H i-Fi H77S

2.4

CONNECTORS AND SLOTS

SATA1/SATA2: Serial ATA3.0 Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Those satisfy the SATA 3.0 spec and with transfer rate of 6.0Gb/s.

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

SATA3 ~ 6: Serial ATA2.0 Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Those satisfy the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

Motherboard Manual

PEX16_1: PCI-Express Gen3 x16 (x16) Slot
-

PCI-Express 3.0 compliant.
Maximum theoretical realized bandwidth of 16GB/s simultaneously per
direction, for an aggregate of 32GB/s totally.
PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.

PEX16_2: PCI-Express Gen2 x4 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 2GB/s simultaneously per
direction, for an aggregate of 4GB/s totally.

PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slot
-

PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

Hi-Fi Z77S /H i-Fi H77S

PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

ATXPWR2: ATX Power Source Connectors
These connectors provide +12V to CPU power circuit. If the CPU power plug is
4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.

Pin
1
2
3
4
5
6
7
8

Assignment
+12V
+12V
+12V
+12V
Ground
Ground
Ground
Ground

Motherboard Manual

ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

Note: Before you power on the system, please make sure that ATXPWR1 and ATXPWR2
connectors have been well plugged-in.

Hi-Fi Z77S /H i-Fi H77S

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function
N/A
N/A
Power LED
Power-on button

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

Pin
1
2
3
4
5
6
7
8
9
10

Note:

Assignment
VBUS0
SSRX1SSRX1+
Ground
SSTX1SSTX1+
Ground
D1D1+
ID

Pin
11
12
13
14
15
16
17
18
19
20

USB3.0 is only supported by Windows 7/8.

Assignment
D2+
D2Ground
SSTX2+
SSTX2Ground
SSRX2+
SSRX2VBUS1
Key

Hi-Fi Z77S /H i-Fi H77S

F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.

Pin
1
2
3
4
5
6
7
8
9
10

HD Audio
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

Pin
1
2
3
4
5
6
7
8
9
10

AC’97
Assignment
Mic In
Ground
Mic Power
Audio Power
RT Line Out
RT Line Out
Reserved
Key
LFT Line Out
LFT Line Out

Note1: It is recommended that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97 front
audio output cable. The function can be found via O.S. Audio Utility.

JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.

Pin
1
2
3

Assignment
+5V
SPDIF_OUT
Ground

Motherboard Manual

CIR1: Consumer IR Connector
This header is for infrared remote control and communication.

Pin
1
2
3
4
5
6

Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

1
3
Pin 1-2 Close:
Normal Operation (default).

1
3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
18

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.

Hi-Fi Z77S /H i-Fi H77S

J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC

BIOS POST Code/CPU Temperature Indicator
This indicator will show POST code while booting. After the booting sequence,
it will show current CPU temperature. Please refer to Chapter 6.3 for all the
BIOS POST codes.

On-Board Buttons
There are 2 on-board buttons.

SW_RST1: Reset button.
SW_PWR1: Power Switch button.
19

Motherboard Manual

CHAPTER 4: RAID / AHCI FUNCTIONS
4.1

OPERATING SYSTEM
SATA
CHIP

Controller

Supporting OS

Configuration
Intel Z77/H77

AHCI

SATA1/SATA2/
SATA3/SATA4/

Windows XP SP2 (32 and 64 bit)
Windows Vista SP2 (32 and 64 bit)
Windows 7/8 (32 and 64 bit)

SATA5/SATA6
Intel Z77/H77

RAID

Windows XP SP2 (32 and 64 bit)

SATA1/SATA2/

Windows Vista SP2 (32 and 64 bit)

SATA3/SATA4/

Windows 7/8 (32 and 64 bit)

SATA5/SATA6

The 'F6 Method'+ to enable RAID / AHCI Driver when installing Windows XP
1.

Before you start Windows installation, copy the proper files for the Windows
version on USB floppy.

SATA1/SATA2/
SATA3/SATA4/
SATA5/SATA6
AHCI/RAID Driver
Path

Windows XP 32

Windows XP 64

x:\Driver\Chipset\Intel\SATA\
7\F6flpy32\Driver\

x:\Driver\Chipset\Intel\SATA\
7\F6flpy64\Driver\

2. When the operating system installation starts, follow Windows indication by
pressing F6 to load the driver.

Hi-Fi Z77S /H i-Fi H77S
Enable RAID / AHCI Driver when installing Windows 8/7/Vista
1.

Before you start Windows installation, copy the proper files for the Windows
version to any USB storage.

SATA1/SATA2/
SATA3/SATA4/
SATA5/SATA6
AHCI/RAID
Driver Path

Windows 7/
Vista 32

Windows 7/
Vista 64

x:\Driver\Chipse
t\Intel\SATA\7\
F6flpy32\Driver\

x:\Driver\Chipse
t\Intel\SATA\7\
F6flpy64\Driver\

Windows 8 32

Windows 8 64

x:\Driver\Chipse
t\Intel\SATA\
Win8\F6flpy32\
Driver\

x:\Driver\Chipse
t\Intel\SATA\
Win8\F6flpy64\
Driver\

2. Follow Windows 7 / Vista indication to load the driver in the installation process.

4.2

RAID ARRAYS
CONNECTOR

BY CHIP

SPEED

Support

SATA1/SATA2

Intel Z77/H77

6 Gb/s.

RAID 0 / 1 / 5 / 10

SATA3/SATA4/SATA5/SATA6

Intel Z77/H77

3 Gb/s.

RAID 0 / 1 / 5 / 10

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write
times for many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.

Motherboard Manual

4.3

HOW RAID WORKS

RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Hi-Fi Z77S /H i-Fi H77S

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.

Features and Benefits

Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.

Block 1
Block 2
Block 3

Motherboard Manual

RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.

Features and Benefits

Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

Hi-Fi Z77S /H i-Fi H77S

RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.

Features and Benefits

Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.

Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY

Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11

Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12

Motherboard Manual

4.4

INTEL SMART RESPONSE TECHNOLOGY

With Intel(R) Smart Response Technology, the performance of RAID with an Intel
SSD drive can be improved better.

Installing Smart Response Technology
1. Install RAID drives (RAID 0, 1, 5) and an Intel SSD.
2. Activate RAID mode from BIOS, and install operating system.
3. Insert the Setup DVD to the optical drive, and Install all drivers (including
Intel(R) Smart Response Technology Driver). After all processes finish,
reboot the system.
4. Intel(R) SRT service icon will show in notification area. Double click it to
open the main windows.
5. Select “Accelerate” page, and make sure the status of accelerated device
has been enabled accelerated.

Hi-Fi Z77S /H i-Fi H77S

CHAPTER 5: UEFI BIOS & SOFTWARE
5.1

UEFI BIOS
UEFI BIOS Features
Overclocking Navigator Engine (O.N.E.)
Self Recovery System (S.R.S)
Smart Fan Function
BIO-Flasher: Update UEFI BIOS file from USB Flash Drive

!! WARNING!!
For better system performance, the UEFI BIOS firmware is being continuously updated. The UEFI
BIOS information described below in this manual is for your reference only and the actual UEFI
BIOS information and settings on board may be different from this manual. For further
information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual in the Setup DVD.

A. Overclocking Navigator Engine (O.N.E.)
O.N.E provides 4 systems allowing users to customize personal overclock
settings: Manual CPU System, Manual Memory System, Manual PWM
System, and Manual Voltage System.

Note1: Not all types of CPU perform above overclock setting ideally; the difference will be based
on the selected CPU model.
Note2: Overclock is an optional process, but not a “must-do” process; it is not recommended for
inexperienced users. Therefore, we will not be responsible for any hardware damage which may
be caused by overclocking. We also would not guarantee any overclocking performance.

Motherboard Manual

B. Self Recovery System (S.R.S.)
This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.

C. Smart Fan Function
Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.

↓

Hi-Fi Z77S /H i-Fi H77S

CPU Smart FAN
This item allows you to control the CPU Smart Fan function.

CPU FAN Calibrate
Press [ENTER] to calibrate CPU FAN.

Control Mode
This item provides several operation modes of the fan.

Fan Ctrl OFF(℃)
When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~50, with an interval of 1.

Fan Ctrl On(℃)
When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~70, with an interval of 1.

Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value. The range is from 0~255, with
an interval of 1.

Fan Ctrl Sensitive
The bigger the numeral is, the higher the FAN speed is. The range is from
1~255, with an interval of 1.

Motherboard Manual

5.2

SOFTWARE

Installing Software
1. Insert the Setup DVD to the optical drive. The driver installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
Due to the H77 chipset limitation, the most overclocking functions will
not be available for Hi-Fi H77S motherboard.

TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status. This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The illustration below is for reference only)

Hi-Fi Z77S /H i-Fi H77S

The CPU tab provides information on the CPU and motherboard.

The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.

The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:

Motherboard Manual
3 Pre-set Modes: V6, V12, AUTO for different overclocking experience.

The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.

Hi-Fi Z77S /H i-Fi H77S

Pressing TOVERCLOCKER logo
displays information about
manufacturer and software version.
You can update current version by
clicking the button “Live Update.”

Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode

Display manufacturer &
software version information

Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto Phase Mode

Reset Time &
Consumption

Display CPU
information

Motherboard Manual
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the system still can keep
excellent performance.

Auto Phase Mode
System switches the mode automatically according to current system
loading condition.

Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.

Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.

Medium Mode
This is the standard system power saving mode.

Maxi-Energy Mode
This is the best system performance mode.

Hi-Fi Z77S /H i-Fi H77S

Smart EAR
Smart EAR is a windows-based audio utility which allows you to easily
adjust system volume. With its user-friendly GUI, you can also adjust
impedance setting (Low/High Gain) to optimize your headphone
performance.

High/Low Gain Switch: Keep the gain switch to low for low impedance
headphone and set to high for high impedance headphone.

Mute Button: To disable system sound

Volume Control Knob: The volume can be finely adjusted by turning the
knob either clockwise or anti-clockwise to increase or decrease system
volume accordingly.

Information Button: Get information of the application

Minimize Button: Minimize the application window to the taskbar

Exit Button: Exit the application

Note:
1. Smart EAR is only supported by Windows 7/8 and BIOSTAR Hi-Fi series motherboards.
2. High/Low Gain Switch is only for “Front Panel Audio Header”, please make sure you are
connecting your headphone to the front panel I/O.

Motherboard Manual

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
information that you
must provide. Without
this information, you may
not be able to send out
the mail.

This block will show
the information which
would be collected in
the mail.

condition
*Describe
of your system.

your area or
*Select
the area close to you.
Provide the e-mail
address that you would
like to send the copy to.
the name of
*Provide
the memory module
manufacturer.

Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.

Exit this dialog.

Save these information to a .txt file

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Hi-Fi Z77S /H i-Fi H77S

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will
see your system information
including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in
the sent mail.

We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.

Motherboard Manual

BIOScreen Utility (Optional)
This utility allows you to personalize your boot logo easily. You can choose
JPG or BMP as your boot logo so as to customize your computer.

Please follow the following instructions to update boot logo:
1. Load Image：Choose the picture as the boot logo.
2. Transform：Transform the picture for BIOS and preview the result.
3. Update Bios：Write the picture to BIOS Memory to complete the update.

Hi-Fi Z77S /H i-Fi H77S

5.3

BIOS UPDATE

There are three ways to update the BIOS:
BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.

1. BIOS Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from www.biostar.com.tw .

3. Open BIOS Update Utility and
click the Update BIOS button on the
main screen.

4. A warning message will show up
to request your agreement to start
the BIOS update. Click Yes to start
the update procedure.

5. Choose the location for your
BIOS file in the system. Please
select the proper BIOS file, and then
click on Open. It will take several
minutes, please be patient.

6. After the BIOS Update process is
finished, click on OK to reboot the
system.

Motherboard Manual
7. While the system boots up and the full screen logo shows up, please press
the

key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

Backup BIOS
Click the Backup BIOS button on
the main screen for the backup of
BIOS, and select a proper location
for your backup BIOS file in the
system, and click Save.

2. Online Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this
function.

3. Open BIOS Update Utility and
click the Online Update button
on the main screen.

4. An open dialog will show up to
request your agreement to
start the BIOS update. Click
Yes to start the online update
procedure.

Hi-Fi Z77S /H i-Fi H77S

5. If there is a new BIOS version,
the utility will ask you to
download it. Click Yes to
proceed.

6. After the download is
completed, you will be asked
to program (update) the BIOS
or not. Click Yes to proceed.

7. After the updating process is
finished, you will be asked you
to reboot the system. Click
OK to reboot.

Motherboard Manual

3. BIOSTAR BIOS Flasher
BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple
way to update your BIOS via USB pen drive.

This utility only allows storage device with FAT32/16 format and single
partition.

Shutting down or resetting the system while updating the BIOS will lead
to system boot failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIOSTAR BIOS Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, copy and save the BIOS file into a USB flash (pen) drive.
3. Insert the USB pen drive that contains the BIOS file to the USB port.
4. Power on or reset the computer and then press during the POST process.

5. After entering the POST screen,
the BIOS-FLASHER utility pops out.
Choose [fs0] to search for the BIOS
file.

6. Select the proper BIOS file, and a
message asking if you are sure to
flash the BIOS file. Click Yes to start
updating BIOS.

Hi-Fi Z77S /H i-Fi H77S

7. A dialog pops out after BIOS flash
is completed, asking you to restart
the system. Press the [Y] key to
restart system.

8. While the system boots up and the full screen logo shows up, press
key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and Reset
to restart the computer. Then, the BIOS Update is completed.
All the information and content about above software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.

Motherboard Manual

CHAPTER 6: USEFUL HELP
6.1

DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver DVD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.
Note: If this window didn’t show up after you insert the Driver DVD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
DVD. Click on the Manual icon to browse for available manual.
Note: You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep2.html
44

Hi-Fi Z77S /H i-Fi H77S

6.2

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

Motherboard Manual

6.3

AMI BIOS POST CODE

Code

Description

10
11
15
19
2B
2C
2D
2E
2F
31
32
33
34
35
36
37
3B
4F
60
F0
F1
F2
F3
F4
E0
E1
E2
E3
60
61
62
63
68
69
6A
70
71
72
78
79
90
91
92
93
94
95
96
97
98

PEI Core is started
Pre-memory CPU initialization is started
Pre-memory North Bridge initialization is started
Pre-memory South Bridge initialization is started
Memory initialization. Serial Presence Detect (SPD) data reading
Memory initialization. Memory presence detection
Memory initialization. Programming memory timing information
Memory initialization. Configuring memory
Memory initialization (other).
Memory Installed
CPU post-memory initialization is started
CPU post-memory initialization. Cache initialization
CPU post-memory initialization. Application Processor(s) (AP) initialization
CPU post-memory initialization. Boot Strap Processor (BSP) selection
CPU post-memory initialization. System Management Mode (SMM) initialization
Post-Memory North Bridge initialization is started
Post-Memory North Bridge initialization (North Bridge module specific)
DXE IPL is started
DXE Core is started
Recovery condition triggered by firmware (Auto recovery)
Recovery condition triggered by user (Forced recovery)
Recovery process started
Recovery firmware image is found
Recovery firmware image is loaded
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
S3 Boot Script execution
Video repost
OS S3 wake vector call
DXE Core is started
NVRAM initialization
Installation of the South Bridge Runtime Services
CPU DXE initialization is started
PCI host bridge initialization
North Bridge DXE initialization is started
North Bridge DXE SMM initialization is started
South Bridge DXE initialization is started
South Bridge DXE SMM initialization is started
South Bridge devices initialization
South Bridge DXE Initialization (South Bridge module specific)
ACPI module initialization
Boot Device Selection (BDS) phase is started
Driver connecting is started
PCI Bus initialization is started
PCI Bus Hot Plug Controller Initialization
PCI Bus Enumeration
PCI Bus Request Resources
PCI Bus Assign Resources
Console Output devices connect
Console input devices connect

Hi-Fi Z77S /H i-Fi H77S
Code
99
9A
9B
9C
9D
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
AB
AD
AE
AF
B0
B1
B2
B3
B4
B5
B6
B7

Description
Super IO Initialization
USB initialization is started
USB Reset
USB Detect
USB Enable
IDE initialization is started
IDE Reset
IDE Detect
IDE Enable
SCSI initialization is started
SCSI Reset
SCSI Detect
SCSI Enable
Setup Verifying Password
Start of Setup
Setup Input Wait
Ready To Boot event
Legacy Boot event
Exit Boot Services event
Runtime Set Virtual Address MAP Begin
Runtime Set Virtual Address MAP End
Legacy Option ROM Initialization
System Reset
USB hot plug
PCI bus hot plug
Clean-up of NVRAM
Configuration Reset (reset of NVRAM settings)

Motherboard Manual

6.4

TROUBLESHOOTING
Probable

Solution

There is no power in the system. 1.
Power LED does not shine; the
fan of the power supply does not 2.
work
3.
Indicator light on keyboard does
not shine.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

System is inoperative. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard drives are running.
module snaps into place.
System does not boot from a hard disk 1.
drive, but can be booted from optical
drive.
2.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure
correct information is in setup.

System cannot boot after user installs a 1.
second hard drive.
2.

Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
Back up data and applications
files.
Reformat the hard drive.
Re-install applications and data
using backup disks.

Set master/slave jumpers
correctly.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

Hi-Fi Z77S /H i-Fi H77S

This page is intentionally left blank.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Unterstützt Execute Disable Bit / Enhanced Intel

Socket 1155
CPU

Intel Core i7 / i5 / i3 / Pentium / Celeron
Prozessoren (TDP: 95W)

Chipsatz

Memory 64 Technology / Virtualization Technology /
Hyper Threading

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
Umgebungskontrolle,

IT8728F
Super E/A

SpeedStep® / Intel Architecture-64 / Extended

Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.

Lüfterdrehzahl-Controller/-Überwachung

Low Pin Count-Schnittstelle

"Smart Guardian"-Funktion von ITE
Dual-Kanal DDR3 Speichermodul

DDR3 DIMM-Steckplätze x 4

Unterstützt DDR3 1066/1333/1600

Arbeitsspeich Max. 32GB Arbeitsspeicher
er

Unterstützt DDR3(OC) 1800/2000/2200/2400/2600

Jeder DIMM unterstützt 512MB/

Unterstützt DDR3(OC) 1866/2133 (Hi-Fi Z77S)

1GB/2GB/4GB/8GB DDR3.

registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.
Datentransferrate bis zu 3.0Gb/s / 6.0Gb/s.

SATA 2 & 3

Integrierter Serial ATA-Controller

Konform mit der SATA-Spezifikation Version 2.0 / 3.0
Unterstützt RAID 0,1,5,10, SRT

LAN

10 / 100 / 1000 Mb/s Auto-Negotiation

Realtek RTL 8111F

Halb-/ Vollduplex-Funktion

Unterstützt High-Definition Audio

Audio-Unters ALC892

7.1-Kanal-Audioausgabe, Biostar Hi-Fi

tützung
USB3.0

Steckplätze

Z77/ H77

Datenübertragungsraten bis zu 600 MB / s

PCI-Steckplatz

PCI Express Gen3 x16 Steckplatz

PCI Express Gen2 x16 Steckplatz(x4) x1
PCI Express Gen2 x 1-Steckplatz

Onboard-Ans SATA3-Anschluss

Jeder Anschluss unterstützt 1 SATA3-Laufwerk

SATA2-Anschluss

Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

chluss

Hi-Fi Z77S /H i-Fi H77S
Spezifikationen
CPU-Lüfter-Sockel

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB2.0-Anschluss

USB3.0-Anschluss

Verbraucher-IR Anschluss

Serieller Anschluss

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB2.0-Anschlüsse
Jeder Anschluss unterstützt 2
Fronttafel-USB3.0-Anschlüsse

S/PDIF Ausgangsanschluss

Stromanschluss (24-polig)

Stromanschluss (8-polig)

PS/2-Tastatur/ Maus

HDMI-Anschluss

VGA-Anschluss

Rückseiten-E DVI-Anschluss

LAN-Anschluss

USB2.0-Anschluss

USB3.0-Anschluss

Audioanschluss

Platinengröße 220 mm (B) X 305 mm (L)
OS-Unterstüt
zung

Unterstützt die digitale Audioausgabefunktion

ATX
Biostar behält sich das Recht vor, ohne Ankündigung

Windows XP / Vista / 7/ 8

die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
Prend en charge les technologies d'exécution de bit de

Socket 1155
UC

désactivation / Intel SpeedStep® optimisée/

Processeurs Intel Core i7 / i5 / i3 /

d'architecture Intel 64 / de mémoire étendue 64 / de

Pentium / Celeron (TDP: 95W)
Chipset

Super E/S

virtualisation / Hyper Threading

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
IT8728F

Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S

Moniteur de matériel

patrimoniales la plus utilisée.

Contrôleur /moniteur de vitesse de ventilateur

Interface à faible compte de broches

Fonction "Gardien intelligent" de l'ITE
Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 1066/1333/1600

Fentes DDR3 DIMM x 4
Mémoire

Capacité mémoire maximale de 32 Go

principale

Chaque DIMM prend en charge des DDR3
de 512Mo/1Go/2Go/4Go/8Go

Prend en charge la DDR3 (OC) 1800/ 2000/ 2200/
2400/ 2600
Prend en charge la DDR3 (OC) 1866/2133 (H-Fi Z77S)
Les DIMM à registres et DIMM avec code correcteurs
d'erreurs ne sont pas prises en charge
Taux de transfert jusqu'à 3.0Go/s / 6.0Go/s.

SATA 2 & 3 Contrôleur Serial ATA intégré :

Conforme à la spécification SATA Version 2.0 / 3.0
Prise en charge RAID 0,1,5,10, SRT

LAN

10 / 100 / 1000 Mb/s négociation automatique

Realtek RTL 8111F

Half / Full duplex capability

Prise en
charge

Prise en charge de l'audio haute définition

ALC892

Sortie audio à 7.1 voies, Biostar Hi-Fi

audio HD
USB3.0

Fentes

Connecteur

Z77/ H77

Taux de transfert de données jusqu'à 600 Mo / s

Fente PCI

Fente PCI Express Gen3 x16

Fente PCI Express Gen2 x16(x4)

Fente PCI Express Gen2 x1

Connecteur SATA3

Connecteur SATA2

Connecteur du panneau avant

embarqué

Chaque connecteur prend en charge 1 périphérique
SATA3
Chaque connecteur prend en charge 1 périphérique
SATA2
Prend en charge les équipements du panneau avant

Hi-Fi Z77S /H i-Fi H77S
SPEC
Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant
Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB2.0

Connecteur USB3.0

Alimentation électrique du ventilateur UC (avec fonction
de ventilateur intelligent)
Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB2.0 de
panneau avant
Chaque connecteur prend en charge 2 ports USB3.0 de
panneau avant

Connecteur de IR du consommateur x1
Port série

Connecteur de sortie S/PDIF

Connecteur d'alimentation

Prend en charge la fonction de sortie audio numérique

(24 broches)
Connecteur d'alimentation

(8 broches)

E/S du
panneau
arrière

Dimensions
de la carte

Clavier PS/2 Clavier/ Souris

Port HDMI

Port VGA

Port DVI

Port LAN

Port USB2.0

Port USB3.0

Fiche audio

220 mm (l) X 305 mm (H)

Support SE Windows XP / Vista / 7/ 8

ATX
Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis

Motherboard Manual

ITALIAN
SPECIFICA
Supporto di Execute Disable Bit / Enhanced Intel

Socket 1155
CPU

Processore Intel Core i7 / i5 / i3 /
Pentium / Celeron(TDP: 95W)

Chipset

Super I/O

SpeedStep® / Architettura Intel 64 / Tecnologia
Extended Memory 64 / Tecnologia Virtualization
/ Hyper Threading

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
IT8728F

Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super

Monitoraggio hardware

I/O usate più comunemente.

Controller / Monitoraggio velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzione "Smart Guardian" di ITE
Modulo di memoria DDR3 a canale doppio

Alloggi DIMM DDR3 x 4

Supporto di DDR3 1066/1333/1600

Memoria

Capacità massima della memoria 32GB Supporto di DDR3(OC) 1800/ 2000/ 2200/

principale

Ciascun DIMM supporta DDR3

2400/ 2600

512MB/1GB/2GB/4GB/8GB

Supporto di DDR3(OC) 1866/2133 (Hi-Fi Z77S)
DIMM registrati e DIMM ECC non sono supportati
Velocità di trasferimento dei dati fino a 3.0Gb/s /
6.0Gb/s.

SATA 2 & 3 Controller Serial ATA integrato

Compatibile specifiche SATA Versione 2.0/3.0
Supporto RAID 0,1,5,10, SRT

LAN
Supporto
audio HD
USB3.0

Alloggi

Supporto audio High-Definition (HD)
Uscita audio 7.1 canali, Biostar Hi-Fi

Z77/ H77

Velocità di trasferimento dati fino a 600 MB / s

Alloggio PCI

Alloggio PCI Express Gen3 x16

Alloggio PCI Express Gen2 x16(x4) x1

Connettori Connettore SATA3

Capacità Half / Full Duplex

ALC892

Alloggio PCI Express Gen2 x1
su scheda

Negoziazione automatica 10 / 100 / 1000 Mb/s

Realtek RTL 8111F

x2
x2

Ciascun connettore supporta 1 unità SATA3

Connettore SATA2

Ciascun connettore supporta 1 unità SATA2

Connettore pannello frontale

Supporta i servizi del pannello frontale

Connettore audio frontale

Supporta la funzione audio pannello frontale

Collettore ventolina CPU

Alimentazione ventolina CPU (con funzione
Smart Fan)

Hi-Fi Z77S /H i-Fi H77S
SPECIFICA
Collettore ventolina sistema

Alimentazione ventolina di sistema

Collettore cancellazione CMOS x1
Connettore USB2.0

Connettore USB3.0

Ciascun connettore supporta 2 porte USB2.0
pannello frontale
Ciascun connettore supporta 2 porte USB3.0
pannello frontale

Connettore IR del consumatore x1
Porta seriale

Connettore output S/PDIF

Connettore alimentazione

Supporta la funzione d’output audio digitale

(24 pin)
Connettore alimentazione

(8 pin)
Tastiera/ Mouse PS/2

I/O
pannello
posteriore

Dimension
i scheda

Porta HDMI

Porta VGA

Porta DVI

Porta LAN

Porta USB2.0

Porta USB3.0

Connettore audio

220 mm (larghezza) x 305 mm
(altezza)

supportati

ATX
Biostar si riserva il diritto di aggiungere o

Sistemi
operativi

Windows XP / Vista / 7/ 8

rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
Admite Bit de deshabilitación de ejecución / Intel

Socket 1155
CPU

Procesador Intel Core i7 / i5 / i3 / Pentium /
Celeron (TDP: 95W)

Conjunto de
chips

Súper E/S

SpeedStep® Mejorado / Intel Architecture-64 /
Tecnología Extended Memory 64 / Tecnología de
virtualización / Hyper Threading

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
IT8728F

Iniciativas de control de entorno,

Le ofrece las funcionalidades heredadas de

Monitor hardware

uso más común Súper E/S.

Controlador/monitor de velocidad de ventilador

Interfaz de cuenta Low Pin

Función "Guardia inteligente" de ITE
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 1066/1333/1600

Ranuras DIMM DDR3 x 4
Memoria

Capacidad máxima de memoria de 32GB

principal

Cada DIMM admite DDR de

Admite DDR3 de (OC) 1800/ 2000/ 2200/ 2400/
2600
Admite DDR3 de (OC) 1866/2133 (Hi-Fi Z77S)

512MB/1GB/2GB/4GB/8GB

No admite DIMM registrados o DIMM compatibles
con ECC
Tasas de transferencia de hasta 3.0 Gb/s / 6.0 Gb/s.

SATA 2 & 3 Controlador ATA Serie Integrado

Compatible con la versión SATA 2.0 / 3.0.
Admite RAID 0,1,5,10, SRT

Red Local
Soporte de
sonido HD
USB3.0

Ranuras

Negociación de 10 / 100 / 1000 Mb/s

Realtek RTL 8111F

Funciones Half / Full dúplex
Soporte de sonido de Alta Definición

ALC892

Salida de sonido de 7.1 canales, Biostar Hi-Fi

Z77/ H77

Tasas de transferencia de datos hasta 600 MB / s

Ranura PCI

Ranura PCI Express Gen3 x16

Ranura PCI Express Gen2 x16(x4) X1
Ranura PCI Express Gen2 x 1

Conectores Conector SATA3

Cada conector soporta 1 dispositivos SATA3

Conector SATA2

Cada conector soporta 1 dispositivos SATA2

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

en placa

Hi-Fi Z77S /H i-Fi H77S
Especificación
Cabecera de ventilador de CPU

Fuente de alimentación de ventilador de CPU (con
función Smart Fan)

Cabecera de ventilador de sistema X2

Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS

Conector USB2.0

Cada conector soporta 2 puertos USB2.0 frontales

Conector USB3.0

Cada conector soporta 2 puertos USB3.0 frontales

Conector de IR del consumidor

Puerto serie

Conector de salida S/PDIF

Conector de alimentación

Soporta función de salida de sonido digital

(24 patillas)
Conector de alimentación

(8 patillas)

Panel
trasero de
E/S

Tamaño de
la placa

Teclado/ Ratón PS/2

Puerto HDMI

Puerto VGA

Puerto DVI

Puerto de red local

Puerto USB2.0

Puerto USB3.0

Conector de sonido

220 mm. (A) X 305 Mm. (H)

Soporte de
sistema

Windows XP / Vista / 7/ 8

ATX

Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.

operativo

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES

CPU

Chipset

Socket 1155

Suporta as tecnologias Execute Disable Bit / Enhanced

Processador Intel Core i7 / i5 / i3 /

Intel SpeedStep® / Intel Arquitecture -64 / Extended

Pentium / Celeron (TDP: 95W)

Memory 64 / Virtualization / Hyper Threading

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
IT8728F

Especificaçã
o Super I/O

Iniciativas para controlo do ambiente

Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.

Monitorização do hardware
Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE

Interface LPC (Low Pin Count).

Módulo de memória DDR3 de canal duplo
Ranhuras DIMM DDR3 x 4
Memória
principal

Suporta módulos DDR3 1066/1333/1600

Capacidade máxima de memória: 32 GB Suporta módulos DDR3 (OC) 1800/ 2000/ 2200/ 2400/
Cada módulo DIMM suporta uma

2600

memória DDR3 de 512MB/

Suporta módulos DDR3 (OC) 1866/2133 (Hi-Fi Z77S)

1GB/2GB/4GB/8GB

Os módulos DIMM registados e os DIMM ECC não são
suportados
Velocidades de transmissão de dados até 3.0 Gb/s / 6.0
Gb/s.

SATA 2 & 3 Controlador Serial ATA integrado

Compatibilidade com a especificação SATA versão 2.0 /
3.0.
Suporta as funções RAID 0,1,5,10, SRT

LAN

Auto negociação de 10 / 100 / 1000 Mb/s

Realtek RTL 8111F

Capacidade semi/full-duplex

Suporte
para áudio

Suporta a especificação High-Definition Audio

ALC892

Saída de áudio de 7.1 canais, Biostar Hi-Fi

de alta
definição
USB3.0

Ranhuras

Z77/ H77

Taxas de transferência de dados até 600 MB / s

Ranhura PCI

Ranhura PCI Express Gen3 x16

Ranhura PCI Express Gen2 x16(x4) x1
Ranhura PCI Express Gen2 x 1

Conectores Conector SATA3

Cada conector suporta 1 dispositivo SATA3

Conector SATA2

Cada conector suporta 1 dispositivo SATA2

na placa

Conector do painel frontal

Para suporte de várias funções no painel frontal

Conector de áudio frontal

Suporta a função de áudio no painel frontal

Hi-Fi Z77S /H i-Fi H77S
ESPECIFICAÇÕES
Alimentação da ventoinha da CPU (com a função Smart

Conector da ventoinha da CPU

Conector da ventoinha do sistema

Conector para limpeza do CMOS

Conector USB2.0

Cada conector suporta 2 portas USB2.0 no painel frontal

Conector USB3.0

Cada conector suporta 2 portas USB3.0 no painel frontal

Conector de IR do consumidor

Porta série

Conector de saída S/PDIF

Conector de alimentação

Fan)
Alimentação da ventoinha do sistema

Suporta a saída de áudio digital

(24 pinos)
Conector de alimentação

(8 pinos)
Teclado/ Mouse PS/2

Porta HDMI

Entradas/S Porta VGA

aídas no

Porta DVI

painel

Porta LAN

Porta USB2.0

Porta USB3.0

Tomada de áudio

traseiro

Tamanho
da placa

220 mm (L) X 305 mm (A)

Sistemas
operativos
suportados

ATX

A Biostar reserva-se o direito de adicionar ou remover
Windows XP / Vista / 7/ 8

suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC
Obsługa Execute Disable Bit / Enhanced Intel

Socket 1155
Procesor

Procesor Intel Core i7 / i5 / i3 / Pentium /
Celeron (TDP: 95W)

Chipset

Memory 64 Technology / Virtualization Technology /
Hyper Threading

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
Moduł pamięci DDR3 z trybem podwójnego kanału

Gniazda DDR3 DIMM x 4

Obsługa DDR3 1066/1333/1600

Pamięć

Maks. wielkość pamięci 32GB

główna

Każde gniazdo DIMM obsługuje moduły
512MB/1GB/2GB/4GB/8GB DDR3

Super I/O

SpeedStep® / Intel Architecture-64 / Extended

Obsługa DDR3(OC) 1800/ 2000/ 2200/ 2400/ 2600
Obsługa DDR3(OC) 1866/2133 (Hi-Fi Z77S)
Brak obsługi Registered DIMM oraz ECC DIMM

IT8728F

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje

Monitor H/W

Super I/O.

Kontroler/Monitor prędkości wentylatora

Interfejs Low Pin Count

Funkcja ITE "Smart Guardian"
Transfer danych do 3.0 Gb/s / 6.0 Gb/s.

SATA 2 & 3 Zintegrowany kontroler Serial ATA

Zgodność ze specyfikacją SATA w wersji 2.0 / 3.0.
Obsługa RAID 0,1,5,10, SRT
10 / 100 / 1000 Mb/s z automatyczną negocjacją

LAN

Realtek RTL 8111F

szybkości
Działanie w trybie połowicznego / pełnego dupleksu

Obsługa
audio HD
USB3.0

Gniazda

Obsługa High-Definition Audio

ALC892

7.1 kanałowe wyjście audio, Biostar Hi-Fi

Z77/ H77

Cena transferu danych do 600 MB / s

Gniazdo PCI

Gniazdo PCI Express Gen3 x16

Gniazdo PCI Express Gen2 x16(x4) x1
Gniazdo PCI Express Gen2 x 1

Złącze SATA3

Każde złącze obsługuje 1 urządzenie SATA3

wbudowane Złącze SATA2

Każde złącze obsługuje 1 urządzenie SATA2

Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Złącza

Złącze główkowe wentylatora
procesora

Obsługa funkcji audio na panelu przednim
Zasilanie wentylatora procesora (z funkcją Smart

Fan)

Hi-Fi Z77S /H i-Fi H77S
SPEC
Złącze główkowe wentylatora
systemowego

Zasilanie wentylatora systemowego

Złącze główkowe kasowania CMOS x1
Złącze USB2.0

Złącze USB3.0

Złącze Konsument IR

Port szeregowy

Złącze wyjścia S/PDIF

Złącze zasilania (24 pinowe)

Złącze zasilania (8 pinowe)

Klawiatura/ Myszka PS/2

Port HDMI

Port VGA

Back Panel Port DVI

Port LAN

Port USB2.0

I/O

Wymiary
płyty

Port USB3.0

Gniazdo audio

220 mm (S) X 305 mm (W)

Każde złącze obsługuje 2 porty USB2.0 na panelu
przednim
Każde złącze obsługuje 2 porty USB3.0 na panelu
przednim

Obsługa funkcji cyfrowego wyjścia audio

ATX

Obsluga
systemu
operacyjne

Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7/ 8

odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU
(центральн
ый

Поддержка технологий Execute Disable Bit /

Socket 1155
Процессор Intel Core i7 / i5 / i3 / Pentium /
Celeron (TDP: 95W)

/ Extended Memory 64 Technology / технологии
виртуализация / Hyper Threading

процессор)
Набор

Enhanced Intel SpeedStep® / Intel Architecture-64

Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)

микросхем
Модуль памяти с двухканальным режимом DDR3
Поддержка DDR3 1066/1333/1600

Слоты DDR3 DIMM x 4
Основная

Максимальная ёмкость памяти 32 ГБ

память

Каждый модуль DIMM поддерживает
512МБ/1ГБ/2ГБ/4ГБ/8 ГБ DDR3

Поддержка DDR3(OC) 1800/ 2000/ 2200/ 2400/
2600
Поддержка DDR3(OC) 1866/2133 (Hi-Fi Z77S)
Не поддерживает зарегистрированные модули
DIMM and ECC DIMM

Super I/O

IT8728F

Инициативы по охране окружающей среды,

Обеспечивает наиболее используемые

Аппаратный монитор

действующие функциональные

Регулятор скорости вентилятора/ монитор

возможности Super I/O.

Функция ITE "Smart Guardian"

Интерфейс с низким количеством выводов (Интеллектуальная защита)
скорость передачи данных до 3.0 гигабит/с /
SATA 2 & 3

Встроенное последовательное устройство 6.0 гигабит/с.
управления ATA

Соответствие спецификации SATA версия 2.0/3.0
Поддержка RAID 0,1,5,10, SRT

Локальная

Автоматическое согласование 10 / 100 / 1000
Realtek RTL 8111F

Мб/с

сеть

Частичная / полная дуплексная способность

Звуковая
поддержка

Звуковая поддержка High-Definition

ALC892

7.1канальный звуковой выход, Biostar Hi-Fi

жесткого
диска
USB3.0

Слоты

Z77/ H77
Слот PCI

Слот PCI Express Gen3 x16

Слот PCI Express Gen2 x16(x4)

Слот PCI Express Gen2 x 1

Встроенны Разъём SATA3
Разъём SATA2
й разъём
Разъём на лицевой панели

скорости передачи данных до 600 МБ / с

Каждый разъём поддерживает 1 устройство SATA3

Каждый разъём поддерживает 1 устройство SATA2

Поддержка устройств на лицевой панели

Hi-Fi Z77S /H i-Fi H77S
СПЕЦ
Входной звуковой разъём

Источник питания для вентилятора центрального

Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы

Поддержка звуковых функций на лицевой
панели

процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы

Открытое контактирующее

Задняя

приспособление CMOS

USB2.0-разъём

USB3.0-разъём

Разъём едока ИКЫЙ

Последовательный порт

Разъём вывода для S/PDIF

Разъем питания (24 вывод)

Разъем питания (8 вывод)

клавиатура/ мышь PS/2

Порт HDMI

Порт VGA

панель

Порт DVI

средств

Порт LAN

USB2.0-порт

USB3.0-порт

ввода-выв
ода

лицевой панели
Каждый разъём поддерживает 2 USB3.0-порта на
лицевой панели

Поддержка вывода цифровой звуковой функции

Гнездо для подключения
наушников

Размер

Каждый разъём поддерживает 2 USB2.0-порта на

220 мм (Ш) X 305 мм (В)

x6
ATX

панели
Поддержка
OS

Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7/ 8

удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰﻳﺔ‬

‫‪Execute Disable Bit / Enhanced Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬

‫‪Socket 1155‬‬
‫‪Intel Core i7 / i5 / i3 / Pentium /‬ﻣﻌﺎﻟﺠﺎت‬
‫)‪ (TDP: 95W‬ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪Celeron‬‬

‫‪SpeedStep® / Intel Architecture-64 / Extended‬‬
‫‪Memory 64 Technology / Virtualization Technology /‬‬
‫‪Hyper Threading‬‬

‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ )‪Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S‬‬
‫ﻣﺰدوﺟﺔ اﻟﻘﻨﺎة ‪ DDR3‬وﺣﺪة ذاآﺮةة‬
‫ﺳﻌﺎت ‪ DDR3 1600 / 1333 / 1066‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻧﻮع‬

‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻋﺪد‪4‬‬

‫ﻣﻴﺠﺎ ﺑﺎﻳﺖ‬

‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬

‫ﺳﻌﺎت ‪ DDR3(OC) / 2000 / 1800‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻧﻮع‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 32‬ﺟﻴﺠﺎ ﺑﺎﻳﺖ‬

‫‪ 2600 / 2400 / 2200‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ‬

‫ﻣﻴﺠﺎ ﺑﺎﻳﺖ و‪ /512 /1‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻧﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬

‫ﺳﻌﺎت ‪ 2133 / 1866‬ﻣﻴﺠﺎ )‪ DDR3(OC‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻧﻮع و‪ /2‬و‪ /4‬و‪ 8‬ﺟﻴﺠﺎ ﺑﺎﻳﺖ‬
‫)‪ (Hi-Fi Z77S‬ﺑﺎﻳﺖ‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪ DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪IT8728F‬‬

‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺟﻬﺰة‬

‫‪ Super I/O‬اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬

‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪.‬ﺛﺎﻧﻴﺔ‪/‬ﺟﻴﺠﺎﺑﺖ ‪ / 6.0‬ﺛﺎﻧﻴﺔ‪/‬ﺟﻴﺠﺎﺑﺖ ‪ 3.0‬إﻟﻰ ﺗﺼﻞ ﺑﺴﺮﻋﺎت اﻟﺒﻴﺎﻧﺎت ﻧﻘﻞ‬
‫‪ 2.0 / 3.0.‬اﻹﺻﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺻﻔﺎت‬

‫‪ SATA 2 & 3‬ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬

‫‪RAID 0,1,5,10, SRT‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺛﺎﻧﻴﺔ و‪1‬ﺟﻴﺠﺎ ﺑﺖ‪/‬ﺛﺎﻧﻴﺔ‬

‫ﺷﺒﻜﺔ داﺧﻠﻴﺔ ‪Realtek RTL 8111F‬‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬

‫إﻣﻜﺎﻧﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ‬

‫‪ALC892‬‬

‫‪ 7.1, Biostar Hi-Fi‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫اﻟﺘﻌﺮﻳﻒ‬
‫‪Z77/ H77 USB3.0‬‬

‫اﻟﻔﺘﺤﺎت‬

‫ﺛﺎﻧﻴﺔ ‪ /‬ﺑﺎﻳﺖ ﻣﻴﻐﺎ ‪ 600‬إﻟﻰ ﺗﺼﻞ ﺑﻴﺎﻧﺎت ﻧﻘﻞ ﻣﻌﺪﻻت‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد ‪2‬‬

‫ﻓﺘﺤﺔ‪PCI Express x16 Gen3‬‬

‫ﻋﺪد‪1‬‬

‫ﻓﺘﺤﺔ‪PCI Express (x4)x16 Gen2‬‬

‫ﻋﺪد‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x 1‬‬

‫ﻋﺪد ‪2‬‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻣﻨﻔﺬ ‪SATA3‬‬

‫ﻋﺪد ‪2‬‬

‫ﻳﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺟﻬﺰة ‪SATA3‬‬

‫اﻟﻠﻮﺣﺔ ﻣﻨﻔﺬ ‪SATA2‬‬

‫ﻋﺪد ‪4‬‬

‫ﻳﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺟﻬﺰة ‪SATA2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫‪64‬‬

‫‪Hi-Fi Z77S /H i-Fi H77S‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬

‫ﻋﺪد ‪1‬‬

‫وﺻﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻟﺘﻮﺻﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ ‪Smart Fan‬‬

‫وﺻﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪2‬‬

‫ﻟﺘﻮﺻﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫وﺻﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪USB2.0‬‬

‫ﻋﺪد ‪2‬‬

‫ﻳﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB2.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻣﻨﻔﺬ ‪USB3.0‬‬

‫ﻋﺪد ‪1‬‬

‫ﻳﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB3.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻣﻨﻔﺬ ﻣﺴﺘﻬﻠﻜﺔ ﺗﺤﺖ اﻷﺣﻤﺮ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد‪1‬‬

‫ﻣﻨﻔﺬ ﺧﺮج ‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺻﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺻﻴﻞ اﻟﻄﺎﻗﺔ )‪8‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪1‬‬

‫‪ PS/2‬ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ ﻟﻠﻜﻤﺒﻴﻮﺗﺮ‪/‬اﻟﻔﺎرة‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪HDMI‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪VGA‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج ﻣﻨﺎﻓﺬ ‪DVI‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪USB2.0‬‬

‫ﻋﺪد ‪4‬‬

‫ﻣﻨﺎﻓﺬ ‪USB3.0‬‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻘﺒﺲ ﺻﻮت‬

‫ﻋﺪد ‪6‬‬

‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ ‪ 305‬ﻣﻢ )ﻋﺮض( ‪ 220 X‬ﻣﻢ )ارﺗﻔﺎع(‬

‫‪65‬‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺧﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬

‫ﻋﺪد ‪1‬‬

‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﻣﻨﻔﺬ ﺷﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬

‫دﻋﻢ أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫‪Windows XP / Vista / 7/ 8‬‬

‫‪ATX‬‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺧﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺑﺪون إﺧﻄﺎر‪.‬‬

Motherboard Manual

JAPANESE
仕様
Execute Disable Bit / Enhanced Intel SpeedStep® /

Socket 1155
CPU

Intel Core i7 / i5 / i3 / Pentium / Celeron プロ
セッサ (TDP: 95W)

Intel Architecture-64 / Extended Memory 64
Technology / Virtualization Technology / Hyper
Threadingをサポートします

チップセット Intel Z77 (Hi-Fi Z77S), Intel H77 (Hi-Fi H77S)
デュアル チャンネルモードDDR3メモリモジュール

DDR3 DIMMスロット x 4

DDR3 1066 / 1333 / 1600 をサポート

最大メモリ容量32GB
メインメモリ

各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3
をサポート

登録済みDIMMとECC DIMMはサポートされません

IT8728F
Super I/O

DDR3(OC) 1800/2000/2200/2400/2600 をサポート
DDR3(OC) 1866/2133 (Hi-Fi Z77S) をサポート

環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O機 H/Wモニター
能を採用しています。

ファン速度コントローラ/ モニター

低ピンカウントインターフェイス

ITEの「スマートガーディアン」機能
最高3.0 Gb/秒 / 6.0 Gb/秒のデータ転送速度
SATAバージョン2.0 / 3.0仕様に準拠。

SATA 2 & 3 統合シリアルATAコントローラ

RAID 0,1,5,10, SRT のサポート
LAN

10 / 100 / 1000 Mb/秒のオートネゴシエーション

Realtek RTL 8111F

半/全二重機能
HDオーディ ALC892

ハイデフィニションオーディオのサポート

オのサポート

7.1 チャンネルオーディオアウト, Biostar Hi-Fi

USB3.0

スロット

Z77/ H77

データ転送速度最大600 MB /秒の

PCIスロット

PCI Express Gen3 x16スロット

PCI Express Gen2 x16スロット(x4) x1
PCI Express Gen2 x 1スロット

オンボードコ SATA3コネクタ

各コネクタは1つのSATA3デバイスをサポートします

SATA2コネクタ

各コネクタは1つのSATA2デバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

ネクタ

Hi-Fi Z77S /H i-Fi H77S
仕様
システムファンヘッダ

CMOSクリアヘッダ

USB2.0コネクタ

システムファン電源装置

各コネクタは2つのフロントパネルUSB2.0ポートをサポ
ートします

USB3.0コネクタ

各コネクタは2つのフロントパネルUSB3.0ポートをサポ
ートします

消費者IRコネクタ

シリアルポート

S/PDIFアウトコネクタ

電源コネクタ(24ピン)

電源コネクタ(8ピン)

PS/2 キーボード/マウス

HDMIポート

VGAポート

背面パネル

DVI-Dポート

I/O

LANポート

USB2.0ポート

USB3.0ポート

オーディオジャック

ボードサイズ 220 mm (幅) X 305 mm (高さ)
OSサポート Windows XP / Vista / 7/ 8

デジタルオーディオアウト機能をサポートします

ATX
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。

2013/04/23

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2013:04:23 10:29:43+08:00
Modify Date                     : 2013:04:23 10:29:43+08:00
Page Count                      : 69
Creation Date                   : 2013:04:23 02:29:43Z
Mod Date                        : 2013:04:23 02:29:43Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 101001
Metadata Date                   : 2013:04:23 02:29:43Z
Creator                         : 101001
Title                           : Microsoft Word - IZ77G-AHT & IH77G-AHT_130423.doc

EXIF Metadata provided by EXIF.tools

Biostar Hi Fi H77S Owners Manual IZ77G AHT & IH77G AHT_130423

Navigation menu

Versions of this User Manual:

Views

Navigation