Biostar N68S Owners Manual N61PC M2S & N68SB M2S_100504
2014-07-31
: Biostar Biostar-N68S-Owners-Manual biostar-n68s-owners-manual biostar pdf
Open the PDF directly: View PDF 
.
Page Count: 45
| Download | |
| Open PDF In Browser | View PDF |
MCP6PB M2+/N68S Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing. The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies. Table of Contents Chapter 1: Introduction ........................................ 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................ 1 Package Checklist ............................................................................. 1 Motherboard Features...................................................................... 2 Rear Panel Connectors ..................................................................... 3 Motherboard Layout......................................................................... 4 Chapter 2: Hardware Installation .......................... 5 2.1 2.2 2.3 2.4 Installing Central Processing Unit (CPU)....................................... 5 FAN Headers...................................................................................... 7 Installing System Memory ................................................................ 8 Connectors and Slots ....................................................................... 10 Chapter 3: Headers & Jumpers Setup .................. 12 3.1 3.2 How to Setup Jumpers .................................................................... 12 Detail Settings.................................................................................. 12 Chapter 4: RAID Functions .................................. 19 4.1 4.2 4.3 Operating System............................................................................ 19 Raid Arrays ...................................................................................... 19 How RAID Works............................................................................. 19 Chapter 5: Useful Help ........................................ 21 5.1 5.2 5.3 5.4 5.5 Driver Installation Note.................................................................. 21 Software............................................................................................ 22 Award BIOS Beep Code .................................................................. 23 Extra Information............................................................................ 23 Troubleshooting............................................................................... 24 Appendix: SPEC In Other Languages ................... 26 German.................................................................................................................. 26 French .................................................................................................................... 28 Italian..................................................................................................................... 30 Spanish ................................................................................................................... 32 Portuguese ............................................................................................................ 34 Polish...................................................................................................................... 36 Russian ................................................................................................................... 38 Arabic..................................................................................................................... 40 Japanese ................................................................................................................ 42 MCP6PB M2+/N68S CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation. Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. Keep the computer from dangerous area, such as heat source, humid air and water. PACKAGE CHECKLIST IDE Cable X 1 (optional) Serial ATA Cable X 2 Rear I/O Panel for ATX Case X 1 Installation Guide X 1 Fully Setup Driver CD X 1 (full version manual files inside) FDD Cable X 1 (optional) USB 2.0 Cable X1 (optional) Serial ATA Power Cable X 1 (optional) Note: The package contents may be differed by area or your motherboard version. 1 Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Socket AM2+ CPU AMD Phenom / Phenom II / Athlon / Athlon II / Sempron processors Chipset Support HyperTransport 1.0 Ghz Supports up to 2 GT/s Bandwidth GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) Low Pin Count Interface ITE 8718F Super I/O Provides the most commonly used legacy Super I/O functionality Environment Control initiatives H/W Monitor ITE's "Smart Guardian" function DDR2 DIMM Slots x 2 Dual Channel Mode DDR2 memory module Main Max Memory Capacity 4GB Supports DDR2 533 / 667 / 800 Memory Each DIMM supports 256MB/512MB/ Supports DDR2 1066 (by AM2+ CPU) 1GB/2GB DDR2 Registered DIMM and ECC DIMM is not supported Graphics GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) IDE Integrated IDE Controller SATA II Integrated Serial ATA Controller LAN Realtek RTL 8201CL PHY Sound ALC662 Max Shared Video Memory is 256MB Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode supports PIO Mode 0~4, Data transfer rates up to 3 Gb/s SATA Version 2.0 specification compliant 10 / 100 Mb/s auto negotiation Half / Full duplex capability 5.1 channels audio out High Definition Audio PCI Express x16 slot x1 Supports PCI-E x16 expansion cards PCI slot x1 Supports PCI expansion cards On Board Floppy connector x1 Each connector supports 2 Floppy drives Connector IDE Connector x1 Each connector supports 2 IDE device SATA Connector x2 Each connector supports 1 SATA device Slots 2 computing Supports Hyper Transport and PowerNow (Maximum Watt: 95W) FSB AMD 64 Architecture enables 32 and 64 bit MCP6PB M2+/N68S SPEC Front Panel Connector x1 Supports front panel facilities Front Audio Connector x1 Supports front panel audio function CPU Fan header x1 CPU Fan power supply (with Smart Fan function) System Fan header x1 System Fan Power supply CMOS clear header x1 Restore CMOS data to factory default USB connector x2 Each connector supports 2 front panel USB ports Power Connector (24pin) x1 Connects to Power supply Power Connector (4pin) x1 Connects to Power supply Printer Port Connector x1 Each connector supports 1 Printer port Serial port Connector x1 Connects to RS-232 Port PS/2 Keyboard x1 Connects to PS/2 Keyboard PS/2 Mouse x1 Connects to PS/2 Mouse Back Panel VGA port x1 Connect to D-SUB monitor I/O LAN port x1 Connect to RJ-45 ethernet cable USB Port x4 Connect to USB devices Audio Jack x3 Provide Audio-In/Out and microphone connection Board Size Special Features 170 mm(W) x 235 mm(L) MicroATX RAID 0 / 1 Biostar Reserves the right to add or remove support OS Support Windows XP / Vista / 7 1.4 for any OS With or without notice. REAR PANEL CONNECTORS PS/2 Mouse LAN Line In/ Sur round Line Out Mic I n 1/ Bass/ Cent er PS/ 2 Keyboard VGA USBX2 USBX2 3 Motherboard Manual 1.5 MOTHERBOARD LAYOUT JKB MS JKB_PWR JATXPWR2 So cke t DIMMB1 DIMMA1 A M 2+ JVGA JUSB1 JATXPWR1 JCFAN IDE JUSBPWR1 JUSBLA N1 GeForce 6150SE/7025 nForce 430/630a JA UDIO1 BAT1 JUSB3 JUSBPWR2 JCOM JUSB2 JCMOS1 PEX16_1 LAN BIOS Super I/O JPRNT FDD JAUDIOF Codec PCI1 SATA2 JSFAN Note: ■ represents the 1st pin. 4 SATA1 JPANEL1 MCP6PB M2+/N68S CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation. 5 Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN. This completes the installation. Note: Please update the BIOS to the latest version while using AM2+ CPUs. Due to the latest CPU transition, you may encounter the situation that the new system failed to boot while using new AM2+ CPUs. In this case, please install one standard AM2 CPU to boot your system, and update the latest BIOS from our website for AM2+ CPUs support. 6 MCP6PB M2+/N68S 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN: CPU Fan Header Pin 1 2 3 1 4 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control (By Fan) JSFAN: System Fan Header Pin 1 2 3 1 Assignment Ground +12V FAN RPM rate sense 3 Note: The JCFAN supports 4-pin head connector; the JSFAN, 3-pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 7 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY D IM M A 1 D IM M B 1 A. Memory Modules 8 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot so that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. MCP6PB M2+/N68S B. Memory Capacity DIMM Socket Location DDR2 Module DIMMA1 256MB/512MB/1GB/2GB DIMMB1 256MB/512MB/1GB/2GB Total Memory Size Max is 4GB. C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table. Dual Channel Status DIMMA1 DIMMB1 Disabled O X Disabled X O Enabled O O (O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16) 9 Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cable. 2 34 1 33 IDE: IDE/ATAPI Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. The IDE connector can connect a master and a slave drive, so you can connect up to two drives. 10 40 39 2 1 MCP6PB M2+/N68S PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth over the traditional PCI architecture. PEX16_1 PCI1: Peripheral Component Interconnect Slot This motherboard is equipped with 1 standard PCI slot. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI1 11 Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS JPANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep, and speaker connection. It allows user to connect the PC case’s front panel switch functions. PWR_LED On/Off 9 1 ++ + SPK Pin 1 2 3 4 5 6 7 8 12 Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control Function Speaker Connector Hard drive LED Reset button Pin 9 10 11 12 13 14 15 16 16 8 RST HLED Assignment N/A N/A N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground Function N/A N/A Power LED Power-on button MCP6PB M2+/N68S JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground Pin 1 2 3 4 5 6 7 8 9 10 11 12 12 24 1 13 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V JATXPWR2: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit. 4 3 1 2 Pin 1 2 3 4 Assignment +12V +12V Ground Ground Note: Before power on the system, please make sure that both JATXPWR1 and JATXPWR2 connectors have been plugged-in. 13 Motherboard Manual JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. Pin 1 2 3 4 5 6 7 8 9 10 JU SB2 JU SB3 10 9 2 1 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground NC Key SATA1/SATA2: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 2 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. SATA2 SATA1 1 14 4 7 Pin 1 2 3 4 5 6 7 Assignment Ground TX+ TXGround RXRX+ Ground MCP6PB M2+/N68S JAUDIOF: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense JCOM: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port. 2 10 1 9 Pin Assignment 1 2 3 4 5 6 7 8 9 10 Carrier detect Received data Transmitted data Data terminal ready Signal ground Data set ready Request to send Clear to send Ring indicator NC 15 Motherboard Manual JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (default). 3 3 1 1 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. 16 Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC. Reset your desired password or clear the CMOS data. MCP6PB M2+/N68S JPRNT: Printer Port Connector This header allows you to connect printer port on the PC. 2 1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 25 Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key 17 Motherboard Manual JUSBPWR1/JUSBPWR2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBPWR1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBPWR2: +5V for USB ports at front panel (JUSB2/JUSB3). Pin 2-3 Close: JUSBPWR1: +5V STB for USB ports at JUSB1/JUSBLAN1. JUSBPWR2: +5V STB for USB ports at front panel (JUSB2/JUSB3). 1 3 JUSBPWR1 1 Pin 1-2 close 3 3 1 1 JUSBPWR2 3 Pin 2-3 close JKB_PWR: Power Source Header for PS/2 Keyboard and Mouse 1 1 3 3 Pin 1-2 close +5V for PS/2 keyboard and mouse. 1 3 Pin 2-3 close +5V STB for PS/2 keyboard and mouse. 18 MCP6PB M2+/N68S CHAPTER 4: RAID FUNCTIONS 4.1 OPERATING SYSTEM Supports Windows XP and Windows Vista. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. 4.3 HOW RAID WORKS RAID 0: The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth. Features and Benefits Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform. Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance. Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity. Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. Fault Tolerance: No. Block 1 Block 3 Block 5 Block 2 Block 4 Block 6 19 Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits Drives: Minimum 2, and maximum is 2. Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity. Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive. Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired during drive rebuilds. Fault Tolerance: Yes. Block 1 Block 2 Block 3 20 Block 1 Block 2 Block 3 MCP6PB M2+/N68S CHAPTER 5: USEFUL HELP 5.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep2.html 21 Motherboard Manual 5.2 SOFTWARE Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose JPG or BMP as your boot logo so as to customize your computer. Please follow the following instructions to update boo logo: 1. Load Image：Choose the picture as the boot logo. 2. Transform：Transform the picture for BIOS and preview the result. 3. 22 Update Bios：Write the picture to BIOS Memory to complete the update. MCP6PB M2+/N68S 5.3 AWARD BIOS BEEP CODE Beep Sound Meaning One long beep followed by two short beeps Video card not found or video card memory bad High-low siren sound CPU overheated System will shut down automatically One Short beep when system boot-up Long beeps every other second No error found during POST No DRAM detected or install 5.4 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section) 2. Wait for seconds. 3. Power on the system again. 23 Motherboard Manual 5.5 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support. Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place. 1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. System only boots from an optical 1. Back up data and applications drive. Hard disks can be read, files. applications can be used, but system 2. Reformat the hard drive. fails to boot from a hard disk. Re-install applications and data using backup disks. Screen message shows “Invalid Review system’s equipment. Make sure Configuration” or “CMOS Failure.” correct information is in setup. System cannot boot after user installs a 1. Set master/slave jumpers second hard drive. correctly. 2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives. 24 MCP6PB M2+/N68S This page is intentionally left blank. 25 Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen Sockel AM2+ CPU AMD Phenom / Phenom II / Athlon / Athlon II / Sempron Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bit- und 64-Bit-Datenverarbeitung Unterstützt Hyper Transport und PowerNow (Maximales Watt: 95W) Unterstützt HyperTransport 2.0 Ghz mit FSB einer Bandbreite von bis zu 4 GT/s Chipsatz GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) Low Pin Count-Schnittstelle ITE8716F Super E/A Bietet die häufig verwendeten alten Super E/A-Funktionen. Dual-Kanal DDR2 Speichermodul Unterstützt DDR2 533 / 667 / 800 Arbeitsspeich Max. 4GB Arbeitsspeicher Jeder DIMM unterstützt 256MB/512MB/ 1GB/2GB DDR2. Grafik GeForce 7025/nForce 630a (N68S) Integrierter IDE-Controller SATA Integrierter Serial ATA-Controller LAN Realtek RTL 8201CL PHY Unterstützt DDR2 1066 (by AM2+ CPU) registrierte DIMMs. ECC DIMMs werden nicht unterstützt. GeForce 6150 SE/nForce 430 (MCP6P M2+) IDE Hardware-Überwachung "Smart Guardian"-Funktion von ITE DDR2 DIMM-Steckplätze x 2 er Umgebungskontrolle, Max. 256 MB gemeinsam benutzter Videospeicher Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus Unterstützt PIO-Modus 0~4, Datentransferrate bis zu 3 Gb/s Konform mit der SATA-Spezifikation Version 2.0. 10 / 100 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion HD 5.1-Kanal-Audioausgabe Audio-Unters ALC662 Unterstützt High-Definition Audio tützung Steckplätze 26 PCI Express x16 Steckplatz x1 PCI-Steckplatz x1 MCP6PB M2+/N68S Spezifikationen Diskettenlaufwerkanschluss x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke SATA-Anschluss x2 Jeder Anschluss unterstützt 1 SATA-Laufwerk Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion CPU-Lüfter-Sockel x1 Fan-Funktion) Onboard-Ans chluss System-Lüfter-Sockel x1 "CMOS löschen"-Sockel x1 USB-Anschluss x2 Stromanschluss (24-polig) x1 Stromanschluss (4-polig) x1 Druckeranschluss Anschluss x1 Serieller Anschluss x1 PS/2-Tastatur x1 PS/2-Maus x1 Rückseiten-E VGA-Anschluss x1 LAN-Anschluss x1 USB-Anschluss x4 Audioanschluss x3 /A Platinengröß e Sonderfunkti CPU-Lüfterstromversorgungsanschluss (mit Smart System-Lüfter-Stromversorgungsanschluss Jeder Anschluss unterstützt 2 Fronttafel-USB-Anschlüsse Jeder Anschluss unterstützt 1 Druckeranschluss 170 mm (B) X 235 mm (L) Unterstützt RAID 0 / 1 onen OS-Unterstü tzung Biostar behält sich das Recht vor, ohne Ankündigung Windows XP / Vista / 7 die Unterstützung für ein Betriebssystem hinzuzufügen oder zu entfernen. 27 Motherboard Manual FRENCH SPEC Socket AM2+ UC Processeurs AMD Phenom / Phenom II / L'architecture AMD 64 permet le calcul 32 et 64 bits Athlon / Athlon II / Sempron Prend en charge Hyper Transport et PowerNow (Watt maximum : 95W) Bus frontal Chipset Prend en charge Hyper Transport 2.0 Ghz jusqu'à une bande passante de 4 GT/s GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) Interface à faible compte de broches ITE 8718F Super E/S Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée. Module de mémoire DDR2 à mode à double voie Mémoire Capacité mémoire maximale de 4 Go principale Chaque DIMM prend en charge des DDR2 de 256Mo/512Mo/1Go/2Go IDE GeForce 7025/nForce 630a (N68S) LAN Realtek RTL 8201CL PHY Connecteur embarqué Conforme à la spécification SATA Version 2.0 10 / 100 Mb/s négociation automatique Half / Full duplex capability Sortie audio à 5.1 voies ALC662 Prise en charge de l'audio haute définition Fente PCI Express x16 x1 Fente PCI x1 Connecteur de disquette x1 Connecteur IDE 28 Mémoire vidéo partagée maximale de 512 Mo Prend en charge le mode PIO 0~4, audio HD Fentes Les DIMM à registres et DIMM avec code correcteurs Taux de transfert jusqu'à 3 Go/s. Prise en charge Prend en charge la DDR2 1066 (by AM2+ CPU) Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133 Contrôleur IDE intégré Contrôleur Serial ATA intégré Prend en charge la DDR2 533 / 667 / 800 d'erreurs ne sont pas prises en charge GeForce 6150 SE/nForce 430 (MCP6P M2+) SATA Moniteur de matériel Fonction "Gardien intelligent" de l'ITE Fentes DDR2 DIMM x 2 Graphiques Initiatives de contrôle environnementales, x1 Chaque connector prend en charge 2 lecteurs de disquettes Chaque connecteur prend en charge 2 périphériques IDE MCP6PB M2+/N68S SPEC Connecteur SATA x2 Connecteur du panneau avant x1 Connecteur Audio du panneau avant x1 Embase de ventilateur UC x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Connecteur USB x2 Connecteur d'alimentation x1 Chaque connecteur prend en charge 1 périphérique SATA Prend en charge les équipements du panneau avant Prend en charge la fonction audio du panneau avant Alimentation électrique du ventilateur UC (avec fonction de ventilateur intelligent) Alimentation électrique du ventilateur système Chaque connecteur prend en charge 2 ports USB de panneau avant (24 broches) Connecteur d'alimentation x1 (4 broches) E/S du panneau arrière Connecteur de Port d'imprimante x1 Connecteur de Port série x1 Clavier PS/2 x1 Souris PS/2 x1 Port VGA x1 Port LAN x1 Port USB x4 Fiche audio x3 Chaque connector prend en charge 1 Port d'imprimante Dimension s de la 170 mm (l) X 235 mm (H) carte Fonctionnal ités Prise en charge RAID 0 / 1 spéciales Support SE Windows XP / Vista / 7 Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. 29 Motherboard Manual ITALIAN SPECIFICA Socket AM2+ CPU Processori AMD Phenom / Phenom II / Athlon / Athlon II / Sempron Chipset e 64 bit Supporto di Hyper Transport e PowerNow (Watt massimo: 95W) FSB L’architettura AMD 64 abilita la co mputazione 32 Supporto di HyperTransport 2.0 Ghz fino a 4 GT/s di larghezza di banda GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) Interfaccia LPC (Low Pin Count) ITE 8718F Super I/O Fornisce le funzionalità legacy Super I/O usate più comunemente. Funzioni di controllo dell’ambiente: Monitoraggio hardware Funzione "Smart Guardian" di ITE Alloggi DIMM DDR2 x 2 Modulo di memoria DDR2 a canale doppio Memoria Capacità massima della memoria 4GB Supporto di DDR2 533 / 667 / 800 principale Ciascun DIMM supporta DDR2 Supporto di DDR2 1066 (by AM2+ CPU) 256MB/512MB/1GB/2GB DIMM registrati e DIMM ECC non sono supportati Grafica GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) La memoria video condivisa massima è di 256 MB Modalità Bus Master Ultra DMA 33 / 66 / 100 / IDE Controller IDE integrato 133 Supporto modalità PIO Mode 0-4 SATA Controller Serial ATA integrato LAN Realtek RTL 8201CL PHY Supporto audio HD Alloggi Velocità di trasferimento dei dati fino a 3 Gb/s. Compatibile specifiche SATA Versione 2.0. Negoziazione automatica 10 / 100 Mb/s Capacità Half / Full Duplex Uscita audio 5.1 canali ALC662 Supporto audio High-Definit ion (HD) Alloggio PCI Express x16 x1 Alloggio PCI x1 Connettori Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy su scheda Connettore IDE x1 Ciascun connettore supporta 2 unità IDE 30 MCP6PB M2+/N68S SPECIFICA Connettore SATA x2 Ciascun connettore supporta 1 unità SATA Connettore pannello frontale x1 Supporta i servizi del pannello frontale Connettore audio frontale x1 Supporta la funzione audio pannello frontale Collettore ventolina CPU x1 Collettore ventolina sistema x1 Collettore cancellaz ione CMOS x1 Connettore USB x2 Connettore alimentazione x1 Alimentazione ventolina CPU (con funzione Smart Fan) Alimentazione ventolina di sistema Ciascun connettore supporta 2 porte USB pannello frontale (24 pin) Connettore alimentazione x1 (4 pin) Connettore Porta stampante I/O pannello posteriore Dimension i scheda x1 Connettore Porta seriale x1 Tastiera PS/2 x1 Mouse PS/2 x1 Porta VGA x1 Porta LAN x1 Porta USB x4 Connettore audio x3 Ciascun connettore supporta 1 Porta stampante 170 mm (larghezza) x 235 mm (altezza) Caratterist iche Supporto RAID 0 / 1 speciali Sistemi operativi supportati Biostar si riserva il diritto di aggiungere o Windows XP / Vista / 7 rimuovere il supporto di qualsiasi sistema operativo senza preavviso. 31 Motherboard Manual SPANISH Especificación Conector AM2+ CPU Procesadores AMD Phenom / Phenom II / Athlon / Athlon II / Sempron Admite HyperTransport 2.0 Ghz con un ancho de banda de hasta 4 GT/s Conjunto GeForce 6150 SE/nForce 430 (MCP6P M2+) de chips GeForce 7025/nForce 630a (N68S) Interfaz de cuenta Low Pin ITE 8718F Súper E/S Le ofrece las funcionalidades heredadas de uso más común Súper E/S. Capacidad máxima de memoria de 4GB principal Cada DIMM admite DDR de 256MB/ GeForce 7025/nForce 630a (N68S) Controlador ATA Serie Integrado Red Local Realtek RTL 8201CL PHY Soporte de sonido HD Ranuras Admite DDR2 de 1066 (by AM2+ CPU) ECC GeForce 6150 SE/nForce 430 (MCP6P M2+) SATA Admite DDR2 de 533 / 667 / 800 No admite DIMM registrados o DIMM compatibles con 512MB/1GB/2GB Controlador IDE integrado Monitor hardware Módulo de memoria DDR2 de canal Doble Memoria IDE Iniciativas de control de entorno, Función "Guardia inteligente" de ITE Ranuras DIMM DDR2 x 2 Gráficos 64 bits Soporta las tecnologías Hyper Transport y PowerNow (Vatio máximo: 95W) FSB La arquitectura AMD 64 permite el procesado de 32 y Memoria máxima de vídeo compartida de 256 MB Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Soporte los Modos PIO 0~4, Tasas de transferencia de hasta 3 Gb/s. Compatible con la versión SATA 2.0. Negociación de 10 / 100 Mb/s Funciones Half / Full dúplex Salida de sonido de 5.1 canales ALC662 Soporte de sonido Alta Definición Ranura PCI Express x16 X1 Ranura PCI X1 Conectores Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible en placa Conector IDE X1 Cada conector soporta 2 dispositivos IDE Conector SATA X2 Cada conector soporta 1 dispositivos SATA 32 MCP6PB M2+/N68S Especificación Conector de panel frontal X1 Soporta instalaciones en el panel frontal Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con función Smart Fan) Cabecera de ventilador de sistema X1 Cabecera de borrado de CMOS X1 Conector USB X2 Conector de alimentación X1 Fuente de alimentación de ventilador de sistema Cada conector soporta 2 puertos USB frontales (24 patillas) Conector de alimentación X1 (4 patillas) Panel trasero de E/S Tamaño de la placa Funciones especiales Conector Puerto de impresora X1 Conector Puerto serie X1 Teclado PS/2 X1 Ratón PS/2 X1 Puerto VGA X1 Puerto de red local X1 Puerto USB X4 Conector de sonido X3 170 mm. (A) X 235 Mm. (H) Admite RAID 0 / 1 Soporte de sistema operativo Cada conector soporta 1 Puerto de impresora Windows XP / Vista / 7 Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo. 33 Motherboard Manual PORTUGUESE ESPECIFICAÇÕES Socket AM2+ CPU Processadores AMD Phenom / Phenom II / Athlon / Athlon II / Sempron A arquitectura AMD 64 permite uma computação de 32 e 64 bits Suporta as tecnologias Hyper Transport e PowerNow (Watt máximo: 95W) Suporta a tecnologia HyperTransport 2.0 FSB Ghz com uma largura de banda até 4 GT/s Chipset Especificaç ão Super I/O Memória principal GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) ITE 8718F Interface LPC (Low Pin Count). Proporciona as funcionalidades mais Iniciativas para controlo do ambiente utilizadas em termos da especificação Monitorização do hardware Super I/O. Função "Smart Guardian" da ITE Ranhuras DIMM DDR2 x 2 Módulo de memória DDR2 de canal duplo Capacidade máxima de memória: 4 GB Suporta módulos DDR2 533 / 667 / 800 Cada módulo DIMM suporta uma Suporta módulos DDR2 1066 (by AM2+ CPU) memória DDR2 de 256MB/512MB/ Os módulos DIMM registados e os DIMM ECC não são 1GB/2GB suportados Placa GeForce 6150 SE/nForce 430 (MCP6P M2+) gráfica GeForce 7025/nForce 630a (N68S) IDE Controlador IDE integrado SATA Controlador Serial ATA integrado LAN Realtek RTL 8201CL PHY Memória de vídeo máxima partilhada: 256 MB Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Suporta o modo PIO 0~4, Velocidades de transmissão de dados até 3 Gb/s. Compatibilidade com a especificação SATA versão 2.0. Auto negociação de 10 / 100 Mb/s Capacidade semi/full-duplex Suporte para áudio de alta Saída de áudio de 5.1 canais ALC662 Suporta a especificação High-Definition Audio definição Ranhuras Ranhura PCI Express x16 Ranhura PCI x1 x1 Conectores Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de disquetes na placa x1 Cada conector suporta 2 dispositivos IDE 34 Conector IDE MCP6PB M2+/N68S ESPECIFICAÇÕES Conector SATA x2 Cada conector suporta 1 dispositivo SATA Conector do painel frontal x1 Para suporte de várias funções no painel frontal Conector de áudio frontal x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x1 Conector para limpeza do CMOS Suporta a função de áudio no painel frontal Alimentação da ventoinha da CPU (com a função Smart Fan) Alimentação da ventoinha do sistema x1 Conector USB x2 Conector de alimentação x1 Cada conector suporta 2 portas USB no painel frontal (24 pinos) Conector de alimentação x1 (4 pinos) Conector da para impressora x1 Conector da Porta série x1 Teclado PS/2 Entradas/S Rato PS/2 x1 x1 aídas no Porta VGA x1 painel Porta LAN x1 traseiro Porta USB x4 Tomada de áudio x3 Tamanho da placa Cada conector suporta 1 Porta para impressora 170 mm (L) X 235 mm (A) Característi cas Suporta as funções RAID 0 / 1 especiais Sistemas operativos suportados A Biostar reserva-se o direito de adicionar ou remover Windows XP / Vista / 7 suporte para qualquer sistema operativo com ou sem aviso prévio. 35 Motherboard Manual POLISH SPEC Socket AM2+ Procesor AMD Phenom / Phenom II / Athlon / Athlon II / Sempron Procesory Chipset bitowe Obsługa Hyper Transport oraz PowerNow (Maksymalny Watt: 95W) FSB Architektura AMD 64 umożliwia przetwarzanie 32 i 64 Obsługa HyperTransport 2.0 Ghz o szerokości pasma do 4 GT/s GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) Gniazda DDR2 DIMM x 2 Moduł pamięci DDR2 z trybem podwójnego kanału Pamięć Maks. wielkość pamięci 4GB Obsługa DDR2 533 / 667 / 800 główna Każde gniazdo DIMM obsługuje moduły Obsługa DDR2 1066 (by AM2+ CPU) 256MB/512MB/1GB/2GB DDR2 Brak obsługi Registered DIMM oraz ECC DIMM Interfejs Low Pin Count ITE 8718F Super I/O Funkcje kontroli warunków pracy, Zapewnia najbardziej powszechne Monitor H/W funkcje Super I/O. Grafika GeForce 6150 SE/nForce 430 (MCP6P M2+) GeForce 7025/nForce 630a (N68S) IDE Zintegrowany kontroler IDE SATA Zintegrowany kontroler Serial ATA LAN Realtek RTL 8201CL PHY Obsługa audio HD Gniazda Funkcja ITE "Smart Guardian" Maks. wielkość współdzielonej pamięci video wynosi 256 MB Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsługa PIO tryb 0~4, Transfer danych do 3 Gb/s. Zgodność ze specyfikacją SATA w wersji 2.0. 10 / 100 Mb/s z automatyczną negocjacją szybkości Działanie w trybie połowicznego / pełnego dupleksu 5.1 kanałowe wyjście audio ALC662 Obsługa High-Definition Audio Gniazdo PCI Express x16 x1 Gniazdo PCI x1 Złącza Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek wbudowan Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE e Złącze SATA x2 Każde złącze obsługuje 1 urządzenie SATA Złącze panela przedniego x1 Obsługa elementów panela przedniego 36 MCP6PB M2+/N68S SPEC Przednie złącze audio x1 Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora Obsługa funkcji audio na panelu przednim Zasilanie wentylatora procesora (z funkcją Smart Fan) Zasilanie wentylatora systemowego systemowego x1 Złącze główkowe kasowania CMOS x1 Złącze USB x2 Złącze zasilania (24 pinowe) x1 Złącze zasilania (4 pinowe) x1 Złącze Port drukarki x1 Złącze Port szeregowy x1 Klawiatura PS/2 x1 Mysz PS/2 x1 Back Panel Port VGA x1 I/O Port LAN x1 Port USB x4 Gniazdo audio x3 Wymiary Każde złącze obsługuje 2 porty USB na panelu przednim Każde złącze obsługuje 1 Port drukarki 170 mm (S) X 235 mm (W) płyty Funkcje Obsługa RAID 0 / 1 specjalne Obsluga systemu operacyjne go Biostar zastrzega sobie prawo dodawania lub Windows XP / Vista / 7 odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia. 37 Motherboard Manual RUSSIAN СПЕЦ CPU (централь ный процессор ) FSB Набор Гнездо AM2+ Процессоры AMD Phenom / Phenom II / Athlon / Athlon II / Sempron Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport и PowerNow (Максимальный ватт: 95W) Поддержка HyperTransport 2.0 Ghz с пропускной способностью до 4 GT/s GeForce 6150 SE/nForce 430 (MCP6P M2+) микросхем GeForce 7025/nForce 630a (N68S) Модуль памяти с двухканальным режимом DDR2 Слоты DDR2 DIMM x 2 Основная Максимальная ёмкость памяти 4 ГБ память Каждый модуль DIMM поддерживает 256МБ/512МБ/1ГБ/2ГБ DDR2 IDE SATA Локальная сеть Не поддерживает зарегистрированные модули Интерфейс с низким количеством выводов Обеспечивает наиболее используемые действующие функциональные Инициативы по охране окружающей среды, Аппаратный монитор Функция ITE "Smart Guardian" (Интеллектуальная возможности Super I/O. Графика Поддержка DDR2 1066 (by AM2+ CPU) DIMM and ECC DIMM ITE 8718F Super I/O Поддержка DDR2 533 / 667 / 800 защита) GeForce 6150 SE/nForce 430 (MCP6P M2+) Максимальная совместно используемая видео GeForce 7025/nForce 630a (N68S) память составляет 256 МБ Встроенное устройство управления Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133 встроенными интерфейсами устройств Поддержка режима PIO 0~4, Встроенное последовательное скорость передачи данных до 3 гигабит/с. устройство управления ATA Соответствие спецификации SATA версия 2.0. Автоматическое согласование 10 / 100 Мб/с Realtek RTL 8201CL PHY Частичная / полная дуплексная способность Звуковая поддержка жесткого Звуковая поддержка High-Definition ALC662 5.1канальный звуковой выход диска Слоты Встроенны й разъём 38 Слот PCI Express x16 x1 Слот PCI x1 Разъём НГМД x1 Разъём IDE x1 Каждый разъём поддерживает 2 накопителя на гибких магнитных дисках Каждый разъём поддерживает 2 встроенных интерфейса накопителей MCP6PB M2+/N68S СПЕЦ Разъём SATA x2 Каждый разъём поддерживает 1 устройство SATA Разъём на лицевой панели x1 Поддержка устройств на лицевой панели Входной звуковой разъём x1 Поддержка звуковых функций на лицевой панели Контактирующее приспособление Источник питания для вентилятора центрального вентилятора центрального процессора (с функцией интеллектуального процессора x1 Контактирующее приспособление вентилятора системы x1 вентилятора) Источник питания для вентилятора системы Открытое контактирующее приспособление CMOS x1 USB-разъём x2 Разъем питания (24 вывод) x1 Разъем питания (4 вывод) x1 Разъём Порт подключения x1 Разъём Последовательный порт x1 Клавиатура PS/2 x1 Мышь PS/2 x1 панель Порт VGA x1 средств Порт LAN x1 ввода-выв USB-порт x4 панели принтера Гнездо для подключения наушников Размер лицевой панели Каждый разъём поддерживает 1 Порт подключения принтера Задняя ода Каждый разъём поддерживает 2 USB-порта на x3 170 мм (Ш) X 235 мм (В) Специальн ые техническ ие Поддержка RAID 0 / 1 характери стики Поддержк а OS Biostar сохраняет за собой право добавлять или Windows XP / Vista / 7 удалять средства обеспечения для OS с или без предварительного уведомления. 39 Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت AM2+ﻡﻘﺒﺲ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ AMD Phenom / Phenom II / Athlon /ﻡﻌﺎﻟﺠﺎت إﺟﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺑﻴﺔ ﺑﺴﺮﻋﺔ 32و 64ﺑﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ اﻟﻤﺮآﺰیﺔ Athlon II / Sempron PowerNowو Hyper Transport 3ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ )و: 95ﻗﺼ ﻮى واط( اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ 4 GT/sﺑﺘﺮدد یﺼﻞ إﻟﻰHyperTransport Ghz2.0ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ )GeForce 6150 SE/nForce 430 (MCP6P M2+ )GeForce 7025/nForce 630a (N68S Low Pin Count Interfaceﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Super I/O ITE 8718F وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ: اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎSuper I/O .ﺗﻮﻓﺮ وﻇﻴﻔﺔ ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺡﺎﻟﺔ اﻷﺟﻬﺰة ITEﻡﻦ ""Smart Guardianوﻇﻴﻔﺔ ﻓﺘﺤﺔ DDR2 DIMM ﻋﺪد2 ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 4ﺟﻴﺠﺎ ﺑﺎیﺖ اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ ﻡﻴﺠﺎ 256/512ﺳﻌﺔ DDR2ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﺑﺎیﺖ و /1و 2ﺟﻴﺠﺎ ﺑﺎیﺖ ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت )GeForce 7025/nForce 630a (N68S ﻡﻨﻔﺬ IDE SATA ﻡﺘﻜﺎﻡﻞSerial ATAﻡﺘﺤﻜﻢ ﺵﺒﻜﺔ داﺥﻠﻴﺔ Realtek RTL 8201CL PHY دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ ﺳﻌﺎت 800 / 667 / 533ﻡﻴﺠﺎ ﺑﺎیﺖDDR2ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﺳﻌﺎت 1066ﻡﻴﺠﺎ ﺑﺎیﺖDDR2ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع )(DDR2 1066 is by AM2+ CPU ECCوﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ DIMMﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة )GeForce 6150 SE/nForce 430 (MCP6P M2+ ﻡﺘﻜﺎﻡﻞIDEﻡﺘﺤﻜﻢ ﻡﺰدوﺟﺔ اﻟﻘﻨﺎةDDR2وﺡﺪة ذاآﺮة یﺠﺎ ﺑﺎیﺖ256أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ وﺿﻊ رﺋﻴﺴﻲUltra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ PIO Mode 0~4دﻋﻢ وﺿﻊ ﺟﻴﺠﺎﺑﺖ/ﺙﺎﻥﻴﺔ3.ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ 2.0.اﻹﺹﺪار SATAﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ 100/10ﻡﻴﺠﺎ ﺑﺎیﺖ /ﺙﺎﻥﻴﺔ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت5.1 ALC662 ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻡﻦ اﻟﺘﻌﺮیﻒ ﻓﺘﺤﺔ PCI Express x16 ﻋﺪد 1 ﻓﺘﺤﺔ PCI ﻋﺪد1 اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 یﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ اﻟﻠﻮﺡﺔ ﻡﻨﻔﺬ IDE ﻋﺪد 1 IDEیﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺟﻬﺰة اﻟﻔﺘﺤﺎت 40 MCP6PB M2+/N68S اﻟﻤﻮاﺻﻔﺎت ﻡﻨﻔﺬ SATA ﻋﺪد2 SATAیﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺡﺪ ﻡﻦ أﺟﻬﺰة ﻡﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ وﺹﻠﺔ ﻡﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ ﻋﺪد 1 Smart Fanﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ وﺹﻠﺔ ﻡﺮوﺡﺔ اﻟﻨﻈﺎم ﻋﺪد 1 ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ اﻟﻨﻈﺎم وﺹﻠﺔ ﻡﺴﺢ CMOS ﻋﺪد 1 ﻡﻨﻔﺬ USB ﻋﺪد 2 ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺑﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )4دﺑﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻟﻮﺡﺔ ﻡﻔﺎﺗﻴﺢ PS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﻨﺎﻓﺬ دﺥﻞ/ﺥﺮج ﻡﻨﻔﺬ VGA ﻋﺪد 1 اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﺎﻓﺬ USB ﻋﺪد4 ﻡﻘﺒﺲ ﺹﻮت ﻋﺪ3 ﺡﺠﻢ اﻟﻠﻮﺡﺔ 170ﻡﻢ )ﻋﺮض( 235 Xﻡﻢ )ارﺗﻔﺎع( ﻡﺰایﺎ ﺥﺎﺹﺔ RAID 0 / 1ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ 41 Windows XP / Vista / 7 ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔUSBیﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو Biostarﺗﺤﺘﻔﻆ ﺑﺪون إﺥﻄﺎر. Motherboard Manual JAPANESE 仕様 CPU FSB Socket AM2+ AMD 64アーキテクチャでは、32ビットと64ビット計算が可 AMD Phenom / Phenom II / Athlon / 能です Athlon II / Sempron プロセッサ ハイパートランスポートとクールアンドクワイアットをサポ (最高のワット: 95W) ートします 4 GT/sのバンド幅までハイパートランスポー ト2.0 GHzをサポートします チップセッ GeForce 6150 SE/nForce 430 (MCP6P M2+) ト GeForce 7025/nForce 630a (N68S) DDR2 DIMMスロット x 2 デュアル チャンネルモードDDR2メモリモジュール メインメモ 最大メモリ容量4GB DDR2 533 / 667 / 800 をサポート リ 各DIMMは 256MB/512MB/1GB/2GB DDR2 1066 をサポート (by AM2+ CPU) DDR2をサポート 登録済みDIMMとECC DIMMはサポートされません 低ピンカウントインターフェイス ITE 8718F Super I/O もっとも一般に使用されるレガシーSuper I/O 機能を採用しています。 環境コントロールイニシアチブ、 H/Wモニター ITEの「スマートガーディアン」機能 グラフィッ GeForce 6150 SE/nForce 430 (MCP6P M2+) クス GeForce 7025/nForce 630a (N68S) IDE 統合IDEコントローラ SATA 統合シリアルATAコントローラ LAN Realtek RTL 8201CL PHY 最大の共有ビデオメモリは256 Bです Ultra DMA 33 / 66 / 100 / 133バスマスタモード PIO Mode 0~4のサポート、 最高3Gb/秒のデータ転送速度 SATAバージョン2.0仕様に準拠。 10 / 100 Mb/秒のオートネゴシエーション 半/全二重機能 HDオーディ オのサポー 5.1チャンネルオーディオアウト ALC662 ハイデフィニションオーディオのサポート ト PCI Express x16スロット x1 PCIスロット x1 オンボード フロッピーコネクタ x1 各コネクタは2つのフロッピードライブをサポートします コネクタ IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします SATAコネクタ x2 各コネクタは1つのSATAデバイスをサポートします スロット 42 MCP6PB M2+/N68S 仕様 フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x1 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x2 電源コネクタ(24ピン) x1 電源コネクタ(4ピン) x1 プリンタポートコネクタ x1 シリアルポートコネクタ x1 PS/2キーボード x1 PS/2マウス x1 背面パネル VGAポート x1 I/O LANポート x1 USBポート x4 オーディオジャック x3 各コネクタは2つのフロントパネルUSBポートをサポートし ます ボードサイ 各コネクタは1つのプリンタポートをサポートします 170 mm (幅) X 235 mm (高さ) ズ 特殊機能 RAID 0 / 1 のサポート OSサポート Windows XP / Vista / 7 Biostarは事前のサポートなしにOSサポートを追加または削 除する権利を留保します。 2010/05/04 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2010:05:04 16:57:57+08:00 Modify Date : 2010:05:04 16:57:57+08:00 Page Count : 45 Creation Date : 2010:05:04 08:57:57Z Mod Date : 2010:05:04 08:57:57Z Producer : Acrobat Distiller 5.0 (Windows) Author : 97031 Metadata Date : 2010:05:04 08:57:57Z Creator : 97031 Title : Microsoft Word - N61PC-M2S & N68SB-M2S_100504.docEXIF Metadata provided by EXIF.tools