Biostar P43D3 Owners Manual IP43C A7S_110520

2014-07-31

: Biostar Biostar-P43D3-Owners-Manual biostar-p43d3-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 47

Download
Open PDF In Browser	View PDF

P43D3 Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili

Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied

Table of Contents
Chapter 1: Introduction ............................................................ 1
1.1
Before You Start ................................................................................ 1
1.2

Package Checklist ............................................................................. 1

1.3

Motherboard Features...................................................................... 2

1.4
1.5

Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation ............................................. 5
2.1
Installing Central Processing Unit (CPU)....................................... 5
2.2
FAN Headers...................................................................................... 7
2.3

Installing System Memory ................................................................ 8

2.4

Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup ..................................... 13
3.1
How to Setup Jumpers .................................................................... 13
3.2

Detail Settings.................................................................................. 13

Chapter 4: Useful Help ............................................................ 18
4.1
Driver Installation Note.................................................................. 18
4.2

Software............................................................................................ 19

4.3

Extra Information............................................................................ 23

4.4

AMI BIOS Beep Code....................................................................... 25

4.5

Troubleshooting............................................................................... 26

Appendix: SPEC In Other Languages ...................................... 27
German.................................................................................................................. 28
French .................................................................................................................... 30
Italian..................................................................................................................... 32
Spanish ................................................................................................................... 34
Portuguese ............................................................................................................ 36
Polish...................................................................................................................... 38
Russian ................................................................................................................... 40
Arabic..................................................................................................................... 42
Japanese ................................................................................................................ 44

P43D3

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.

1.2

The operating temperatures of the computer should be
0 to 45 degrees Celsius.

PACKAGE CHECKLIST
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
LGA 775

Supports Hyper-Threading / Execute Disable Bit /

Intel Core2Duo / Core2Quad /
CPU

Pentium Dual-Core / Celeron Dual-Core /
Celeron 4xx processor

Chipset

800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43
Intel ICH10
ITE 8718F

Super I/O

Environment Control initiatives,

Provides the most commonly used legacy Hardware Monitor Controller
Super I/O functionality.

Fan Speed Controller

Low Pin Count Interface

ITE's "Smart Guardian" function

DIMM Slots x 2

Dual Channel Mode DDR3 memory module

Main

Each DIMM supports 512MB / 1GB / 2GB Supports DDR3 1333(OC) / 1066 / 800

Memory

DDR3

Registered DIMM and ECC DIMM is not supported

Max Memory Capacity 4GB

(CPU with FSB 800 MHz only supports DDR3 800)

SATA 2

Integrated Serial ATA Controller

LAN

Realtek RTL8111DL

Sound
Codec

Slots

On Board

Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant
10 / 100 Mb/s / 1Gb/s auto negotiation
Half / Full duplex capability
5.1 channels audio out

ALC662

High Definition Audio

PCI Express Gen2 x16 Slot

Supports PCI-E Gen2 x16 expansion cards

PCI Express x1 Slot

Supports PCI-E x1 expansion cards

PCI Slot

Supports PCI expansion cards

Floppy Connector

Each connector supports 1 Floppy drive

Each connector supports 1 Printer port

SATA Connector

Each connector supports 1 SATA device

Front Panel Connector

Supports front panel facilities

Front Audio Connector

Supports front panel audio function

Connectors Printer Port Connector

Extended Memory 64 Technology / Virtualization
Technology

(Maximum Watt: 125W)
FSB

Enhanced Intel SpeedStep® / Intel Architecture-64 /

P43D3
SPEC
S/PDIF out Connector

Supports digital audio out function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

Clear CMOS Header

Restore CMOS data to factory default

USB Connector

Each connector supports 2 front panel USB ports

Power Connector (24pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

PS/2 Keyboard

Connects to PS/2 Keyboard

PS/2 Mouse

Connects to PS/2 Mouse

Back Panel Serial Port

Connects to RS-232 Port

I/O

LAN port

Connect to RJ-45 ethernet cable

USB Port

Connect to USB devices

Audio Jack

Provide Audio-In/Out and microphone connection

Board Size

182(W) x 295 (L) mm

OS Support Windows 2000 / XP / Vista 32 / Vista 64 / 7

1.4

Biostar reserves the right to add or remove support for
any OS with or without notice

REAR PANEL CONNECTORS

PS/2
Mouse

LAN

Line In/
Surround
Line Out
Mic In 1/
Bass/ Center

PS/2
Keyboar d

COM1

USBX2

Since the audio chip supports High Definition Audio Specification, the function of each audio
jack can be defined by software. The input / output function of each audio jack listed above
represents the default setting. However, when connecting external microphone to the audio port,
please use the Line In (blue) and Mic In (Pink) audio jack.

Motherboard Manual

1.5

MOTHERBOARD LAYOUT
KBMS1

LGA775
ATXPWR1

CPU1

DDR 3_A 1

CO M 1

DDR 3_B 1

ATXPWR2

CPU_FAN1
USB1

Intel
P43

JUSBV1

RJ45USB1

AUDIO1

PEX16_1

LAN

BAT1

PEX1_1

Intel
ICH10

PEX1_2

PCI1

Super
I/O

JCMOS1
SATA4

PCI2

PCI3

SATA3
JUSBV2

CODEC

JSPDIFOUT1
SYS_FAN 1
J_PRINT1

Note: ■ represents the 1st pin.
4

SATA2

SATA1

F_USB2 F_USB1

FDD1
F_AUDIO1

BIOS

PANEL1

P43D3

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Pin-Cap

Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.

Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1. This completes the installation.

P43D3

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different due to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

1
4

Pin
1
2
3
4

Assignment
Ground
Power
FAN RPM rate sense
Smart Fan Control

Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate sense

SYS_FAN1: System Fan Header

Note:
CPU_FAN1 supports 4-pin head connector; SYS_FAN1, 3-pin head one. When
connecting with wires onto connectors, please note that the red wire is the positive and
should be connected to pin#2, and the black wire is Ground and should be connected to
GND.
7

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

D DR 3_B1

D DR 3_A1

A. DDR3 module

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

P43D3

B. Memory Capacity
DIMM Socket
Location

DDR3 Module

DDR3_A1

256MB/512MB/1GB/2GB

DDR3_B1

256MB/512MB/1GB/2GB

Total Memory
Size
Max is 4GB.

C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_B1
Disabled

Disabled

Enabled

(O means memory installed; X, not installed.)
The DRAM bus width of the memory module must be the same(x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.

SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4channels SATA interface, it
satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.
Pin
1
2
3
4
5
6
7

SATA4 SATA2
SATA3 SATA1

Assignment
Ground
TX+
TXGround
RXRX+
Ground

P43D3

ATXPWR1: ATX Power Source Connector
This connector is for 24-pin power connector on the ATX power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

ATXPWR2: ATX Power Source Connector
Connecting this connector provides +12V to CPU power circuit.
2

Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
11

Motherboard Manual

PCI1~PCI3: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

PCI3

PEX16_1: PCI-Express Gen2 x16 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.

PEX1_1/PEX1_2: PCI-Express x1 Slot
-

PCI-Express 1.1 compliant.
Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth over the PCI architecture.

PEX1 6_1
PEX1_1
PEX1_2

P43D3

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
POW_LED
On/Off
++

9
1

16
8
RST

SPK

HLED

Assignment

+5V

N/A

Speaker

HDD LED (+)

HDD LED (-)

Ground

Reset control

Function

Speaker
Connector

Hard drive
LED
Reset button

Assignment

N/A

Power LED (+)

Power LED (-)

Power button

Ground

Function
N/A
N/A
Power LED

Power-on button

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This motherboard provides 2 USB 2.0 headers, which allows user to connect
additional USB cable on the PC front panel, and also can be connected with
internal USB devices, like USB card reader.
Pin
1
2
3
4
5
6
7
8
9
10

F_USB2 F_USB1
2

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB1/RJ45USB1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB1/RJ45USB1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.

JU SBV 1

Pin 1-2 close

1
3

Pin 2-3 close

JU SBV 2
14

P43D3

F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector, not AC’97.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.

Pin
1
2
3

Assignment
+5V
SPDIF_OUT
Ground

Motherboard Manual

J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13

Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5

Pin
14
15
16
17
18
19
20
21
22
23
24
25
26

Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key

P43D3

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1

Pin 1-2 Close:
Normal Operation
(Default).

Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.

Reset your desired password or clear the CMOS data.

Motherboard Manual

CHAPTER 4: USEFUL HELP
4.1

DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
18

P43D3

4.2

SOFTWARE

Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you

must provide. Wi thout
this information, you may
not be able to send out
the mail.

This bl ock will show
the i nformation which
would be collected in
the mail .

conditi on
*Describe
of your system.

your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.

Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.

Exi t thi s dialog.

Save these in forma tion to a .txt file

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

P43D3

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS

Show current BIOS information

AMI BIOS

Clear CMOS function
(Only for AWARD BIOS)

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
22

P43D3

4.3

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

Motherboard Manual

BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

P43D3

4.4

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
25

Motherboard Manual

4.5

TROUBLESHOOTING
Probable

There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.

Solution
1.
2.
3.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

P43D3

This page is intentionally left blank.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
LGA 775
Unterstützt Hyper-Threading / Execute Disable Bit /
Intel Core2Duo / Core2Quad /
Enhanced Intel SpeedStep® / Intel Architecture-64 /
CPU

Pentium Dual-Core / Celeron Dual-Core /
Extended Memory 64 Technology / Virtualization
Celeron 4xx Prozessoren
Technology
(Maximales Watt: 125W)

FSB

800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43

Chipsatz
Intel ICH10
ITE 8718F

Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung
Super E/A
E/A-Funktionen.

Lüfterdrehzahl-Controller/-Überwachung

Low Pin Count-Schnittstelle

"Smart Guardian"-Funktion von ITE
Dual-Kanal DDR3 Speichermodul

DDR3 DIMM-Steckplätze x 2
Unterstützt DDR3 1333(OC) / 1066 / 800
Arbeitsspeich Jeder DIMM unterstützt 512MB / 1GB / 2GB
registrierte DIMMs. ECC DIMMs werden nicht
er

DDR3.
unterstützt.
Max. 4GB Arbeitsspeicher
(CPU mit 800 MHz FSB unterstützt nur DDR3-800)
Datentransferrate bis zu 3.0Gb/s

SATA

Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0.
10 / 100 / 1000 Mb/s Auto-Negotiation

LAN

Realtek RTL8111DL
Halb-/ Vollduplex-Funktion

HD
Unterstützt High-Definition Audio
Audio-Unters ALC662
5.1-Kanal-Audioausgabe
tützung

Steckplätze

PCI Express Gen2 x16 Steckplatz

PCI Express x1 Steckplatz

PCI Steckplatz

P43D3
Spezifikationen
Diskettenlaufwerkanschluss

Jeder Anschluss unterstützt 1 Diskettenlaufwerke

Druckeranschluss Anschluss

Jeder Anschluss unterstützt 1 Druckeranschluss

SATA-Anschluss

Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

S/PDIF- Ausgangsanschluss

Unterstützt die digitale Audioausgabefunktion

CPU-Lüfter-Sockel

Onboard-Ans
chluss

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse
Stromanschluss (24-polig)

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus

Rückseiten-E Serieller Anschluss

LAN-Anschluss

USB-Anschluss

Audioanschluss

Platinengröße 182mm (B) X 295 mm (L)
Biostar behält sich das Recht vor, ohne Ankündigung
OS-Unterstüt
Windows 2000 / XP / Vista 32 / Vista 64 / 7 die Unterstützung für ein Betriebssystem
zung
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
LGA 775
Prend en charge les technologies Hyper-Threading /
Processeurs Intel Core2Duo / Core2Quad
d'exécution de bit de désactivation / Intel SpeedStep®
UC

/ Pentium Dual-Core / Celeron Dual-Core /
optimisée/ d'architecture Intel 64 / de mémoire
Celeron 4xx
étendue 64 / de virtualisation
(Watt maximum : 125W)

Bus frontal 800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43
Chipset
Intel ICH10
ITE 8718F

Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S

Moniteur de matériel

patrimoniales la plus utilisée.

Contrôleur /moniteur de vitesse de ventilateur

Interface à faible compte de broches

Fonction "Gardien intelligent" de l'ITE

Super E/S

Module de mémoire DDR3 à mode à double voie
Fentes DDR3 DIMM x 2

Prend en charge la DDR3 1333(OC) / 1066 / 800

Mémoire

Chaque DIMM prend en charge des DDR3 Les DIMM à registres et DIMM avec code correcteurs

principale

de 512Mo / 1Go / 2Go

d'erreurs ne sont pas prises en charge

Capacité mémoire maximale de 4Go

(UC avec FSB 800 MHz ne prend en charge que DDR3
800)
Taux de transfert jusqu'à 3.0Go/s.

SATA

Contrôleur Serial ATA intégré
Conforme à la spécification SATA Version 2.0
10 / 100 / 1000 Mb/s négociation automatique

LAN

Realtek RTL8111DL
Half / Full duplex capability

Prise en
charge

Prise en charge de l'audio haute définition
ALC662
Sortie audio à 5.1 voies

audio HD

Fentes

Fente PCI Express Gen2 x16

Fente PCI Express x1

Fente PCI

P43D3
SPEC
Chaque connector prend en charge 1 lecteurs de
Connecteur de disquette

x1
disquette

Connecteur de Port d'imprimante

Connecteur SATA

Chaque connector prend en charge 1 Port d'imprimante
Chaque connecteur prend en charge 1 périphérique
SATA

Connecteur du panneau avant

Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1

Prend en charge la fonction audio du panneau avant

Connecteur de sortie S/PDIF

Prend en charge la fonction de sortie audio numérique

Embase de ventilateur UC

Alimentation électrique du ventilateur UC (avec fonction

Connecteur
embarqué

de ventilateur intelligent)
Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB de
panneau avant
Connecteur d'alimentation

(24 broches)
Connecteur d'alimentation

(4 broches)

E/S du
panneau
arrière

Dimensions
de la carte

Clavier PS/2

Souris PS/2

Port série

Port LAN

Port USB

Fiche audio

182mm (l) X 295 mm (H)

Support SE Windows 2000 / XP / Vista 32 / Vista 64 / 7

Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
SPECIFICA
LGA 775
Supporto di Hyper-Threading / Execute Disable
Processore Intel Core2Duo /
Bit / Enhanced Intel SpeedStep® / Architettura
CPU

Core2Quad / Pentium Dual-Core /
Intel 64 / Tecnologia Extended Memory 64 /
Celeron Dual-Core / Celeron 4xx
Tecnologia V irtualization
(Watt massimo: 125W)

FSB

800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43

Chipset
Intel ICH10
ITE 8718F

Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super Monitoraggio hardware
Super I/O
I/O usate più comunemente.

Controller / Monitoraggio velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Modulo di memoria DDR3 a canale doppio

Memoria

Ciascun DIMM supporta DDR3 512MB Supporto di DDR3 1333(OC) / 1066 / 800

principale

/ 1GB / 2GB

DIMM registrati e DIMM ECC non sono supportati

Capacità massima della memoria 4GB (CPU con FSB a 800 MHz supporta solo DDR3 800)
Velocità di trasferimento dei dati fino a 3.0Gb/s.
SATA

Controller Serial ATA integrato
Compatibile specifiche SATA Versione 2.0.
Negoziazione automatica 10 / 100 / 1000 Mb/s

LAN

Realtek RTL8111DL
Capacità Half / Full Duplex
Supporto audio High-Definition (HD)

Supporto
audio HD

ALC662
Uscita audio 5.1 canali
Alloggio PCI Express Gen2 x16 x1

Alloggi

Alloggio PCI Express x1

Alloggio PCI

P43D3
SPECIFICA
Connettore floppy

Ciascun connettore supporta 1 unità Floppy

Connettore Porta stampante

Ciascun connettore supporta 1 Porta stampante

Connettore SATA

Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale

Supporta i servizi del pannello frontale

Connettore audio frontale

Supporta la funzione audio pannello frontale

Connettore output SPDIF

Supporta la funzione d’output audio digitale

Collettore ventolina CPU

Alimentazione ventolina CPU (con funzione Smart
Connettori

Fan)

su scheda Collettore ventolina sistema

Collettore cancellaz ione CMOS

Connettore USB

Alimentazione ventolina di sistema

Ciascun connettore supporta 2 porte USB
pannello frontale
Connettore alimentazione

(24 pin)
Connettore alimentazione

(4 pin)
Tastiera PS/2

Mouse PS/2

Porta seriale

Porta LAN

Porta USB

Connettore audio

I/O
pannello
posteriore

Dimension 182mm (larghezza) x 295 mm
i scheda

(altezza)
Biostar si riserva il diritto di aggiungere o

Sistemi
operativi
supportati

Windows 2000 / XP / Vista 32 / Vista
rimuovere il supporto di qualsiasi sistema
64 / 7
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
LGA 775
Admite Hyper-Threading / Bit de deshabilitación de
Procesador Intel Core2Duo / Core2Quad /
ejecución / Intel SpeedStep® Mejorado / Intel
CPU

Pentium Dual-Core / Celeron Dual-Core /
Architecture-64 / Tecnología Extended Memory 64 /
Celeron 4xx
Tecnología de virtualización
(Vatio máximo: 125W)

FSB

800 / 1066 / 1333 / 1600 MHz (OC) MHz

Conjunto de Intel P43
chips

Intel ICH10
ITE 8718F

Iniciativas de control de entorno,

Le ofrece las funcionalidades heredadas de Monitor hardware
Súper E/S
uso más común Súper E/S.

Controlador/monitor de velocidad de ventilador

Interfaz de cuenta Low Pin

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 2

Módulo de memoria DDR3 de canal Doble

Memoria

Cada DIMM admite DDR de 512MB / 1GB / Admite DDR3 de 1333(OC) / 1066 / 800

principal

2GB

No admite DIMM registrados o DIMM compatibles con

Capacidad máxima de memoria de 4GB

ECC (CPU con FSB de 800 MHz sólo soporta DDR3 800)
Tasas de transferencia de hasta 3.0 Gb/s.

SATA

Controlador ATA Serie Integrado
Compatible con la versión SATA 2.0.
Negociación de 10 / 100 / 1000 Mb/s

Red Local

Realtek RTL8111DL
Funciones Half / Full dúplex
Soporte de sonido de Alta Definición

Soporte de
sonido HD

Ranuras

ALC662
Salida de sonido de 5.1 canales
Ranura PCI Express Gen2 x16

Ranura PCI express x1

Ranura PCI

P43D3
Especificación
Conector disco flexible

Cada conector soporta 1 unidade de disco flexible

Conector Puerto de impresora

Cada conector soporta 1 Puerto de impresora

Conector SATA

Cada conector soporta 1 dispositivos SATA

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

Conector de salida S/PDIF

Soporta función de salida de sonido digital

Cabecera de ventilador de CPU

Fuente de alimentación de ventilador de CPU (con

Conectores
función Smart Fan)

en placa
Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

Fuente de alimentación de ventilador de sistema

Cada conector soporta 2 puertos USB frontales

(24 patillas)
Conector de alimentación

(4 patillas)

Panel

Teclado PS/2

Ratón PS/2

Puerto serie

Puerto de red local

Puerto USB

Conector de sonido

trasero de
E/S

Tamaño de
la placa

182mm. (A) X 295 Mm. (H)

Soporte de
sistema
operativo

Biostar se reserva el derecho de añadir o retirar el
Windows 2000 / XP / Vista 32 / Vista 64 / 7
soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES
LGA 775
Processador Intel Core2Duo / Core2Quad Suporta as tecnologias Hyper-Threading / Execute
CPU

/ Pentium Dual-Core / Celeron Dual-Core / Disable Bit / Enhanced Intel SpeedStep® / Intel
Celeron 4xx

Arquitecture -64 / Extended Memory 64 / Virtualization

(Watt máximo: 125W)
FSB

Chipset

800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43
Intel ICH10
ITE 8718F
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais

Especificaçã
o Super I/O

Monitorização do hardware
utilizadas em termos da especificação
Controlador/Monitor da velocidade da ventoinha
Super I/O.
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).
Módulo de memória DDR3 de canal duplo
Ranhuras DIMM DDR3 x 2
Suporta módulos DDR3 1333(OC) / 1066 / 800

Memória

Cada módulo DIMM suporta uma

principal

memória DDR3 de 512 MB / 1GB / 2GB

Os módulos DIMM registados e os DIMM ECC não são
suportados
Capacidade máxima de memória:4GB
(CPU com FSB 800 MHz só suporta DDR3 800)

SATA

Velocidades de transmissão de dados até 3.0 Gb/s.
Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão 2.0.

LAN

Auto negociação de 10 / 100 / 1000 Mb/s
Realtek RTL8111DL
Capacidade semi/full-duplex

Suporte
para áudio
de alta

Suporta a especificação High-Definition Audio
ALC662
Saída de áudio de 5.1 canais

definição

Ranhuras

Ranhura PCI Express Gen2 x16

Ranhura PCI Express x1

Ranhura PCI

P43D3
ESPECIFICAÇÕES
Conector da unidade de disquetes

Cada conector suporta 1 unidade de disquete

Conector da para impressora

Cada conector suporta 1 Porta para impressora

Conector SATA

Cada conector suporta 1 dispositivo SATA

Conector do painel frontal

Para suporte de várias funções no painel frontal

Conector de áudio frontal

Suporta a função de áudio no painel frontal

Conector de saída S/PDIF

Suporta a saída de áudio digital

Conector da ventoinha da CPU

Alimentação da ventoinha da CPU (com a função Smart
Fan)

Conectores
na placa

Conector da ventoinha do sistema

Conector para limpeza do CMOS

Conector USB

Conector de alimentação

Alimentação da ventoinha do sistema

Cada conector suporta 2 portas USB no painel frontal

(24 pinos)
Conector de alimentação

(4 pinos)
Teclado PS/2

Entradas/S Rato PS/2

aídas no

Porta série

painel

Porta LAN

traseiro

Porta USB

Tomada de áudio

Tamanho
da placa
Sistemas
operativos
suportados

182mm (L) X 295 mm (A)
A Biostar reserva-se o direito de adicionar ou remover
Windows 2000 / XP / Vista 32 / Vista 64 / 7 suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC
LGA 775
Obsługa Hyper-Threading / Execute Disable Bit /
Procesor Intel Core2Duo / Core2Quad /
Enhanced Intel SpeedStep® / Intel Architecture-64 /
Procesor

Pentium Dual-Core / Celeron Dual-Core /
Extended Memory 64 Technology / Virtualization
Celeron 4xx
Technology
(Maksymalny Watt: 125W)

FSB

800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43

Chipset
Intel ICH10
Gniazda DDR3 DIMM x 2

Moduł pamięci DDR3 z trybem podwójnego kanału

Pamięć

Każde gniazdo DIMM obsługuje moduły

Obsługa DDR3 1333(OC) / 1066 / 800

główna

512MB / 1GB / 2GB

Brak obsługi Registered DIMM oraz ECC DIMM

Maks. wielkość pamięci 4GB

(CPU z FSB 800 MHz tylko obsługuje pamięci DDR3 800)

ITE 8718F

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje Monitor H/W
Super I/O
Super I/O.

Kontroler/Monitor prędkości wentylatora

Interfejs Low Pin Count

Funkcja ITE "Smart Guardian"
Transfer danych do 3.0 Gb/s.

SATA

Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0.
10 / 100 / 1000 Mb/s z automatyczną negocjacją

LAN

Realtek RTL8111DL

szybkości
Działanie w trybie połowicznego / pełnego dupleksu
Obsługa High-Definition Audio

Obsługa
audio HD

Gniazda

ALC662
5.1 kanałowe wyjście audio
Gniazdo PCI Express Gen2 x16

Gniazdo PCI Express x1

Gniazdo PCI

P43D3
SPEC
Złącze napędu dyskietek

Każde złącze obsługuje 1 napędy dyskietek

Złącze Port drukarki

Każde złącze obsługuje 1 Port drukarki

Złącze SATA

Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącze wyjścia S/PDIF

Obsługa funkcji cyfrowego wyjścia audio

Złącze główkowe wentylatora
Zasilanie wentylatora procesora (z funkcją Smart Fan)

Złącza
wbudowane

procesora

Złącze główkowe wentylatora
Zasilanie wentylatora systemowego
systemowego

Złącze główkowe kasowania CMOS x1
Każde złącze obsługuje 2 porty USB na panelu
Złącze USB

x2
przednim

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Back Panel Port szeregowy

I/O

Port LAN

Port USB

Gniazdo audio

Wymiary
płyty
Obsluga
systemu
operacyjne
go

182mm (S) X 295 mm (W)

Biostar zastrzega sobie prawo dodawania lub
Windows 2000 / XP / Vista 32 / Vista 64 / 7 odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
LGA 775
CPU
(центральн
ый

Процессор Intel Core2Duo / Core2Quad /
Pentium Dual-Core / Celeron Dual-Core /

процессор) Celeron 4xx

800 / 1066 / 1333 / 1600 (OC) МГц

Набор

Intel P43

Disable Bit / Enhanced Intel SpeedStep® / Intel
Architecture-64 / Extended Memory 64 Technology /
технологии виртуализация

(Максимальный ватт: 125W)
FSB

Поддержка технологий Hyper-Threading / Execute

микросхем Intel ICH10
Модуль памяти с двухканальным режимом DDR3
Слоты DDR3 DIMM x 2

Поддержка DDR3 1333(OC) / 1066 / 800

Основная

Каждый модуль DIMM поддерживает

Не поддерживает зарегистрированные модули

память

512МБ / 1ГБ / 2ГБ DDR3

DIMM and ECC DIMM

Максимальная ёмкость памяти 4ГБ

(Процессор с ФСБ 800 МГц поддерживает только
DDR3 800)

ITE 8718F
Обеспечивает наиболее используемые
Super I/O

действующие функциональные

Функция ITE "Smart Guardian" (Интеллектуальная

Интерфейс с низким количеством

защита)

выводов

Локальная
сеть

Аппаратный монитор
Регулятор скорости вентилятора/ монитор

возможности Super I/O.

SATA

Инициативы по охране окружающей среды,

Встроенное последовательное

скорость передачи данных до 3.0 гигабит/с.

устройство управления ATA

Соответствие спецификации SATA версия 2.0.
Автоматическое согласование 10 / 100 / 1000 Мб/с

Realtek RTL8111DL

Частичная / полная дуплексная способность

Звуковая
поддержка
жесткого

Звуковая поддержка High-Definition

ALC662

5.1канальный звуковой выход

диска

Слоты

Слот PCI Express Gen2 x16

Слот PCI Express x1

Слот PCI

P43D3
СПЕЦ
Разъём НГМД

Разъём Порт подключения

Встроенны
й разъём

Каждый разъём поддерживает 1 накопителя на
гибких магнитных дисках
Каждый разъём поддерживает 1 Порт подключения

принтера

Разъём SATA

Каждый разъём поддерживает 1 устройство SATA

Разъём на лицевой панели

Поддержка устройств на лицевой панели

Входной звуковой разъём

Поддержка звуковых функций на лицевой панели

Разъём вывода для S/PDIF

Поддержка вывода цифровой звуковой функции

Контактирующее приспособление

Источник питания для вентилятора центрального

вентилятора центрального процессора процессора (с функцией интеллектуального
x1

вентилятора)

Контактирующее приспособление
вентилятора системы

Источник питания для вентилятора системы

Открытое контактирующее
приспособление CMOS

USB-разъём

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Клавиатура PS/2

Мышь PS/2

панель

Последовательный порт

средств

Порт LAN

Задняя

ввода-выв USB-порт
ода
Гнездо для подключения
наушников
Размер
панели
Поддержка
OS

Каждый разъём поддерживает 2 USB-порта на
лицевой панели

182мм (Ш) X 295 мм (В)
Biostar сохраняет за собой право добавлять или
Windows 2000 / XP / Vista 32 / Vista 64 / 7 удалять средства обеспечения для OS с или без
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪LGA 775‬‬
‫‪Hyper-Threading / Execute Disable Bit /‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Intel Core2Duo / Core2Quad /‬ﻣﻌﺎﻟﺠﺎت‬
‫‪Enhanced Intel SpeedStep® / Intel Architecture-64 /‬‬

‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫‪Pentium Dual-Core / Celeron Dual-Core /‬‬

‫‪Extended Memory 64 Technology / Virtualization‬‬

‫اﻟﻤﺮآﺰیﺔ‬
‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Celeron 4xx‬‬

‫‪Technology‬‬
‫)و‪: 125‬ﻗﺼ ﻮى واط(‬
‫اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ﻣﻴﺠﺎ هﺮﺗﺰ )‪ 800 / 1066 / 1333 / 1600 (OC‬ﺗﺮدد‬
‫‪Intel P43‬‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪Intel ICH10‬‬

‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬

‫ﻋﺪد‪2‬‬

‫ﺳﻌﺔ ﺗﺪﻋﻢ آﻞ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺎت ‪ (OC)1333 / 1066 / 800‬ﻣﻴﺠﺎ ﺑﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬

‫ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ 512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﻓﺘﺤﺔ ‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫و‪ /1‬و‪2‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬

‫ﺗ ﺪﻋﻢ ﻓﻘ ﻂ ﻣﻴﻐ ﺎهﻴﺮﺗﺰ اﻟﻤﺮآﺰی ﺔ اﻟﻤﻌﺎﻟﺠ ﺔ وﺣﺪة ﻣﻊ ﻣﻴﺠ ﺎهﺮﺗﺰ ‪(800‬‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 4‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬

‫)‪DDR3 800‬‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪ITE 8718F‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫‪Super I/O‬‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.0.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬

‫‪SATA‬‬

‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬

‫ﺷﺒﻜﺔ داﺧﻠﻴﺔ‬

‫‪Realtek RTL8111DL‬‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬

‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬

‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫‪ALC662‬‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫اﻟﺘﻌﺮیﻒ‬

‫اﻟﻔﺘﺤﺎت‬

‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI Express x1‬‬

‫ﻋﺪد ‪2‬‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪ‪3‬‬
‫‪42‬‬

‫‪P43D3‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد ‪4‬‬

‫‪SATA‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة‬

‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬

‫اﻟﻠﻮﺣﺔ‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬

‫ﻋﺪد ‪1‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس( ع‬

‫یﺪﻋﻢ ﻣﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬

‫ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‪USB‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ‬

‫دد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج‬

‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬

‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬

‫ﻋﺪ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪4‬‬

‫ﻣﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪3‬‬

‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬

‫‪182‬ﻣﻢ )ﻋﺮض( ‪ 295 X‬ﻣﻢ )ارﺗﻔﺎع(‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫‪Windows 2000 / XP / Vista 32 / Vista 64 / 7‬‬

‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺧﻄﺎر أو ﺏﺪون ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫إﺧﻄﺎر‪.‬‬

‫‪43‬‬

Motherboard Manual

JAPANESE
仕様
LGA 775
Hyper-Threading / Execute Disable Bit / Enhanced Intel
Intel Core2Duo / Core2Quad /
SpeedStep® / Intel Architecture-64 / Extended
CPU

Pentium Dual-Core / Celeron Dual-Core /
Memory 64 Technology / Virtualization Technologyをサ
Celeron 4xx processor
ポートします
(最高のワット: 125W)

FSB

800 / 1066 / 1333 / 1600 MHz (OC) MHz
Intel P43

チップセット
Intel ICH10
デュアル チャンネルモードDDR3メモリモジュール
DDR3 DIMMスロット x 2
DDR3 1333(OC) / 1066 / 800をサポート
各DIMMは 512MB / 1GB / 2GB DDR3をサ
登録済みDIMMとECC DIMMはサポートされません

メインメモリ
ポート

(のCPUのFSBを800 MHzの唯一のDDR3 800をサポートし
最大メモリ容量4GB
ています)
ITE 8718F

環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O H/Wモニター
Super I/O
機能を採用しています。

ファン速度コントローラ/ モニター

低ピンカウントインターフェイス

ITEの「スマートガーディアン」機能
最高3.0 Gb/秒のデータ転送速度

SATA

統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠。
10 / 100 / 1000 Mb/秒のオートネゴシエーション

LAN

Realtek RTL8111DL
半/全二重機能

HDオーディ

ハイデフィニションオーディオのサポート
ALC662
5.1 チャンネルオーディオアウト

オのサポート

スロット

PCI Express Gen2 x16スロット

PCI Express x1スロット

PCIスロット

P43D3
仕様
フロッピーコネクタ

各コネクタは1つのフロッピードライブをサポートします

プリンタポートコネクタ

各コネクタは1つのプリンタポートをサポートします

SATAコネクタ

各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

S/PDIFアウトコネクタ

デジタルオーディオアウト機能をサポートします

CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ

システムファン電源装置

CMOSクリアヘッダ

USBコネクタ

オンボードコ
ネクタ

各コネクタは2つのフロントパネルUSBポートをサポートし
ます
電源コネクタ(24ピン)

電源コネクタ(4ピン)

PS/2キーボード

PS/2マウス

背面パネル

シリアルポート

I/O

LANポート

USBポート

オーディオジャック

ボードサイズ 182mm (幅) X 295 mm (高さ)
Biostarは事前のサポートなしにOSサポートを追加または削
OSサポート Windows 2000 / XP / Vista 32 / Vista 64 / 7
除する権利を留保します。

2011/05/20

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2011:05:20 16:01:18+08:00
Modify Date                     : 2011:05:20 16:01:18+08:00
Page Count                      : 47
Creation Date                   : 2011:05:20 08:01:18Z
Mod Date                        : 2011:05:20 08:01:18Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 97031
Metadata Date                   : 2011:05:20 08:01:18Z
Creator                         : 97031
Title                           : Microsoft Word - IP43C-A7S_110520.doc

EXIF Metadata provided by EXIF.tools

Biostar P43D3 Owners Manual IP43C A7S_110520

Navigation menu

Versions of this User Manual:

Views

Navigation