Biostar P4M900 M4 Owners Manual P4M90 M4_090217C
2014-07-31
: Biostar Biostar-P4M900-M4-Owners-Manual biostar-p4m900-m4-owners-manual biostar pdf
Open the PDF directly: View PDF 
.
Page Count: 49
| Download | |
| Open PDF In Browser | View PDF |
P4M900-M4 Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing. The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies. Table of Contents Chapter 1: INTRODUCTION ................................... 3 1.1 1.2 1.3 1.4 1.5 1.6 Before You Start ................................................................................ 3 Package Checklist ............................................................................. 3 Motherboard FeaturesS.................................................................... 4 Rear Panel Connectors (for Ver 5.x)............................................... 6 Rear Panel Connectors (for Ver 6.x)............................................... 6 Motherboard Layout......................................................................... 7 Chapter 2: Hardware Installation .......................... 8 2.1 2.2 2.3 2.4 Installing Central Processing Unit (CPU)....................................... 8 Fan Headers....................................................................................... 9 Installing System Memory .............................................................. 10 Connectors and Slots ....................................................................... 11 Chapter 3: Headers & Jumpers Setup .................. 13 3.1 3.2 How to Setup Jumpers .................................................................... 13 Detail Settings.................................................................................. 13 Chapter 4: USEFUL HELP ..................................... 19 4.1 4.2 4.3 4.4 Driver Installation Note.................................................................. 19 Award BIOS Beep Code .................................................................. 20 Extra Information............................................................................ 20 Troubleshooting............................................................................... 22 Chapter 5: WarpSpeeder™ .................................. 23 5.1 5.2 5.3 5.4 Introduction...................................................................................... 23 System Requirement ....................................................................... 23 Installation ....................................................................................... 24 WarpSpeeder™................................................................................. 25 Appendencies: SPEC In Other Language .............. 32 German.................................................................................................................. 32 French .................................................................................................................... 34 Italian..................................................................................................................... 36 Spanish ................................................................................................................... 38 Portuguese ............................................................................................................ 40 Polish...................................................................................................................... 42 Russian ................................................................................................................... 44 Arabic..................................................................................................................... 46 Japanese ................................................................................................................ 48 P4M900-M4 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation. Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge. Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment. Keep the computer from dangerous area, such as heat source, humid air and water. 1.2 PACKAGE CHECKLIST HDD Cable X 1 User’s Manual X 1 Fully Setup Driver CD X 1 Rear I/O Panel for ATX Case X 1 FDD Cable X 1 (optional) Serial ATA Cable X 1 (optional) USB 2.0 Cable X1 (optional) S/PDIF Cable X 1 (optional) Serial ATA Power Cable X 1 (optional) 3 Motherboard Manual 1.3 MOTHERBOARD FEATURES Ver 5.x Socket 478 Ver 6.x Socket 478 Intel Pent ium 4 / Celeron D processor up to Intel Pent ium 4 / Celeron D processor up to CPU 3.4 GHz (Do not support Willamette CPU.) 3.4 GHz (Do not support Willamette CPU.) Supports Hyper Threading technology Supports Hyper Threading technology *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. FSB Chipset Graphic Super I/O 95W power consumption. 400 / 533 / 800 MHz 400 / 533 / 800 MHz VIA P4M900 VIA P4M900 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Max Shared Video Memory is 256 MB Max Shared Video Memory is 256 MB ITE 8718F ITE 8718F Provides the most commonly used legacy Provides the most commonly used legacy Super I/O functionality. Super I/O functionality. Low Pin Count Interface Low Pin Count Interface Environment Control initiat ives, Environment Control initiat ives, H/W Monitor H/W Monitor Fan Speed Controller Fan Speed Controller ITE's "Smart Guardian" function ITE's "Smart Guardian" function DIMM S lots x 2 DIMM S lots x 2 Supports DDR2 533 / 667 Supports DDR2 533 / 667 Each DIMM supports 256/512MB/1GB/2GB Each DIMM supports 256/512MB/1GB/2GB Main Memory IDE SATA 4 DDR2 DDR2 Max Memory Capicity 4GB Max Memory Capicity 4GB Single Channel Mode DDR2 memory Single Channel Mode DDR2 memory module module Registered DIMM and ECC DIMM is not Registered DIMM and ECC DIMM is not supported supported Integrated IDE Controller Integrated IDE Controller Ultra DMA 33~133 Bus Master Mode Ultra DMA 33~133 Bus Master Mode supports PIO Mode 0~4, supports PIO Mode 0~4, Integrated Serial ATA Controller Integrated Serial ATA Controller Data transfer rates up to 1.5 Gb/s. Data transfer rates up to 1.5 Gb/s. SATA Version 1.0 specification compliant. SATA Version 1.0 specification compliant. P4M900-M4 Ver 5.x LAN PHY Sound Codec Ver 6.x Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY 10 / 100 Mb/s auto negotiation 10 / 100 Mb/s auto negotiation Half / Full duplex capability Half / Full duplex capability ALC883 VT1708B / ALC662 / ALC861VD 7.1 channels audio out 5.1 channels audio out High-Definition Audio support High-Definition Audio support PCI Express x 16 slot x1 PCI Express x 16 slot x1 PCI Express x 1 slot x1 PCI Express x 1 slot x1 PCI slot x2 PCI slot x2 Floppy connector x1 Floppy connector x1 Printer Port connector x1 Printer Port connector x1 IDE Connector x2 IDE Connector x2 SATA Connector x2 SATA Connector x2 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 On Board CD-in Connector x1 CD-in Connector x1 Connector S/PDIF out connector x1 S/PDIF out connector x1 Slots Back Panel I/O CPU Fan header x1 CPU Fan header x1 System Fan header x1 System Fan header x1 Clear CMOS header x1 Clear CMOS header x1 USB connector x2 USB connector x2 Power Connector (24pin) x1 Power Connector (24pin) x1 Power Connector (4pin) x1 Power Connector (4pin) x1 PS/2 Keyboard x1 PS/2 Keyboard x1 PS/2 Mouse x1 PS/2 Mouse x1 Serial Port x1 Serial Port x1 VGA Port x1 VGA Port x1 LAN port x1 LAN port x1 USB Port x4 USB Port x4 Audio Jack x6 Audio Jack x3 Board Size 190 mm (W) x 244 mm (L) OS Support Windows 2000 / XP / VISTA 190 mm (W) x 244 mm (L) Windows 2000 / XP / VISTA Biostar Reserves the right to add or remove Biostar Reserves the right to add or remove support for any OS with or without notice. support for any OS with or without notice. 5 Motherboard Manual 1.4 REAR PANEL CONNECTORS (FOR VER 5.X) LAN PS/2 Mouse PS/2 Keyboard COM1 VGA Center 1.5 USBX2 AUDIO JACK USBX2 Line In Rear Line Out Side Mic In REAR PANEL CONNECTORS (FOR VER 6.X) LAN PS/2 Mouse Line In/ Surround Line Out Mic In 1/ Bass/ Center PS/2 Keyboar d COM1 VGA USBX2 USBX2 Since the audio chip supports High Definition Audio Specification, the function of each audio jack can be defined by software. The input / output function of each audio jack listed above represents the default setting. However, when connecting external microphone to the audio port, please use the Line In (blue) and Mic In (Pink) audio jack. 6 P4M900-M4 1.6 MOTHERBOARD LAYOUT JCFAN1 JKBMS1 PU Socket 478 JCOM1 CPU1 JPRNT1 DIMM1 JVGA1 JUSB1 DIMM2 JATXPWR1 JUSBV1 JUSBLAN1 IDE1 P4M900 IDE2 JATXPWR2 JAUDIO1 (for Ver 5.x) JAUDIO2 (for Ver 6.x) LAN PCI-EX16 Super I/O PCI-EX1_1 BAT1 JSATA2 JUSB2 VIA VT8237A PCI1 BIOS JUSB3 JCDIN1 PCI2 Codec JUSBV2 JSATA1 JCMOS1 JAUDIOF1 JSFAN1 FDD1 JSPDIF_OUT1 JPANEL1 Note: ■ represents the 1st pin. 7 Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever sideways away from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white dot/cut edge. The white dot/cut edge should point wards the lever pivot. The CPU will fit only in the correct orientation. Step 3: Hold the CPU down firmly, and then close the lever to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation. 8 P4M900-M4 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Header 3 1 Pin 1 2 3 Assignment Ground +12V FAN RPM rate sense Pin Assignment Ground +12V FAN RPM rate sense JSFAN1: System Fan Header 1 2 3 3 1 Note: The JCFAN1/JSFAN1 support 3-pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 9 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY DIMM1 DIMM2 A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B. Memory Capacity 10 DIMM Socket Location DDR Module DIMM1 256MB/512MB/1GB/2GB DIMM2 256MB/512MB/1GB/2GB Total Memory Size Max is 4GB. P4M900-M4 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 IDE1/IDE2: Hard Disk Connectors The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary). The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives. The first hard drive should always be connected to IDE1. 40 39 2 1 IDE1 IDE2 11 Motherboard Manual PCI-EX16: PCI-Express x16 Slot - PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. PCI-EX1_1: PCI-Express x1 Slot - PCI-Express 1.0a compliant. Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth over the traditional PCI architecture. PCI-EX16 PCI-EX1_1 PCI1~PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI1 PCI2 12 P4M900-M4 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS JPANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button and speaker connection. It allows user to connect the PC case’s front panel switch functions. SLP PWR_LED On/Off ++ - 9 1 + SPK Pin 1 2 3 4 5 6 7 8 Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control Function Speaker Connector Hard drive LED Reset button Pin 9 10 11 12 13 14 15 16 16 8 RST HLED Assignment Sleep control Ground N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground Function Sleep button N/A Power LED Power-on button 13 Motherboard Manual ATX Power Source Connector: JATXPWR1 JATXPWR1 allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V JATXPWR2: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit. 14 1 4 2 3 Pin 1 2 3 4 Assignment +12V +12V Ground Ground P4M900-M4 JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. 2 10 JUSB2 1 9 JUSB3 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3). Pin 2-3 Close: JUSBV1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby voltage. JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V standby voltage. 1 3 3 1 3 Pin 1-2 close 1 JUSBV1 1 1 3 3 1 3 Pin 2-3 close JUSBV2 Note: In order to support this function “Power-On system via USB device,” “JUSBV1/ JUSBV2” jumper cap should be placed on Pin 2-3 individually. 15 Motherboard Manual JAUDIOF1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. It will disable the output on back panel audio connectors. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc. Pin 1 2 3 4 4 Assignment Left Channel Input Ground Ground Right Channel Input 1 JSPDIF_OUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 3 16 1 Assignment +5V SPDIF_OUT Ground P4M900-M4 JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 3 1 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC. Reset your desired password or clear the CMOS data. JSATA1~JSATA2: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 2 channels SATA interface, it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s. JSATA2 7 4 1 4 1 Pin 1 2 3 4 5 6 7 Assignment Ground TX+ TXGround RXRX+ Ground 7 JSATA1 17 Motherboard Manual JPRNT1: Printer Port Connector This header allows you to connector printer on the PC. 25 2 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 18 Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 1 Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key P4M900-M4 CHAPTER 4: USEFUL HELP 4.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program. B. Software Installation To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program. C. Manual Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep2.html 19 Motherboard Manual 4.2 AWARD BIOS BEEP CODE Beep Sound Meaning One long beep followed by two short beeps High-low siren sound Video card not found or video card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up Long beeps every other second No error found during POST No DRAM detected or install 4.3 EXTRA INFORMATION A. BIOS Update After you fail to update BIOS or BIOS is invaded by virus, the Boot-Block function will help to restore BIOS. If the following message is shown after boot-up the system, it means the BIOS contents are corrupted. In this Case, please follow the procedure below to restore the BIOS: 1. Make a bootable floppy disk. 2. Download the Flash Utility “AWDFLASH.exe” from the Biostar website: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar website. 4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk. 5. Insert the bootable disk into floppy drive and press Enter. 6. System will boot-up to DOS prompt. 7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt. (xxxx means BIOS name.) 8. System will update BIOS automatically and restart. 9. The BIOS has been recovered and will work properly. 20 P4M900-M4 B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” section) 2. Wait for seconds. 3. Power on the system again. 21 Motherboard Manual 4.4 TROUBLESHOOTING Probable 1. Solution No power to the system at all 1. Make sure power cable is Power light don’t illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard does not turn on. System inoperative. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard drive is spinning. module snaps into place. System does not boot from hard disk 1. Check cable running from disk to drive, can be booted from optical drive. disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. System only boots from optical drive. 1. Back up data and applications Hard disk can be read and applications files. can be used but booting from hard disk 2. Reformat the hard drive. is impossible. Re-install applications and data using backup disks. Screen message says “Invalid Review system’s equipment. Make sure Configuration” or “CMOS Failure.” correct information is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard drive. correctly. 2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives. 22 P4M900-M4 CHAPTER 5: WARPSPEEDER™ 5.1 INTRODUCTION [WarpSpeeder™], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel. Moreover, to protect users' computer systems if the setting is not appropriate when testing and results in system fail or hang, [WarpSpeeder™] technology assures the system stability by automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one. 5.2 SYSTEM REQUIREMENT OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.) 23 Motherboard Manual 5.3 INSTALLATION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish” button. Usage: The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. 24 P4M900-M4 5.4 WARPSPEEDER™ 1. Tray Icon Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure. The “Launch Utility” item in the popup menu has the same function as mouse left-click on tray icon and “Exit” item will close Tray Icon utility if selected. 25 Motherboard Manual 2. Main Panel If you click the tray icon, [WarpSpeeder™] utility will be invoked. Please refer to the following figure; the utility’s first window you will see is Main Panel. Main Panel contains features as follows: a. b. c. 26 Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels. With a user-friendly Status Animation, it can represent 3 overclock percentage stages: Man walking→overclock percentage from 100% ~ 110 % Panther running→overclock percentage from 110% ~ 120% Car racing→overclock percentage from 120% ~ above P4M900-M4 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is “No”. If you want to get the best performance of overclocking, we recommend you click the option “Yes”. 27 Motherboard Manual 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock by click the Verify button. Or, you can just click Auto overclock button and let [WarpSpeeder™] automatically gets the best result for you. b. 28 “Recovery Dialog button”: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot. c. d. P4M900-M4 “Auto-overclock button”: User can click this button and [WarpSpeeder™] will set the best and stable performance and frequency automatically. [WarpSpeeder™] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting. “Verify button”: User can click this button and [WarpSpeeder™] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting. Note: Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required. And please make sure your display card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is required for Direct3D rendering. 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second. 29 Motherboard Manual 6. About Panel Click the “about” button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard’s BIOS model and the Version number of [WarpSpeeder™] utility. Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder™] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions. This property can make [WarpSpeeder™] utility more robust. 30 P4M900-M4 This page is intentionally left blank. 31 Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Ver 5.x CPU Ver 6.x Sockel 478 Sockel 478 Intel Pentium 4 / Celeron D Prozessoren Intel Pentium 4 / Celeron D Prozessoren mit bis zu 3,4 GHz (Unterstützt keine mit bis zu 3,4 GHz (Unterstützt keine Willamette CPUs) Willamette CPUs) Unterstützt Hyper-Threading Technology Unterstützt Hyper-Threading Technology *It is recommended to use processors with *It is reco mmended to use processors with FSB Chipsatz Grafik 95W power consumption. 95W power consumption. 400 / 533 / 800 MHz 400 / 533 / 800 MHz VIA P4M900 VIA P4M900 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Max. 256MB gemeinsam benutzter Max. 256MB gemeinsam benutzter Videospeicher Videospeicher ITE 8712F ITE 8712F Bietet die häufig verwendeten alten Super Bietet die häufig verwendeten alten Super Super E/A E/A-Funktionen. E/A-Funktionen. Low Pin Count-Schnittstelle Low Pin Count-Schnittstelle Umgebungskontrolle, Umgebungskontrolle, Hardware-Überwachung Hardware-Überwachung Lüfterdrehzahl-Controller Lüfterdrehzahl-Controller "Smart Guardian"-Funktion von ITE "Smart Guardian"-Funktion von ITE DDR2 DIMM-Steckplätze x 2 DDR2 DIMM-Steckplätze x 2 Unterstützt DDR2 533 / 667 Unterstützt DDR2 533 / 667 Jeder DIMM unterstützt Jeder DIMM unterstützt Arbeitsspeic 256/512MB/1GB/2GB DDR2. her IDE SATA 32 256/512MB/1GB/2GB DDR2. Max. 4GB Arbeitsspeicher Max. 4GB Arbeitsspeicher Ein-Kanal DDR2 Speichermodul Ein-Kanal DDR2 Speichermodul registrierte DIMMs. ECC DIMMs werden registrierte DIMMs. ECC DIMMs werden nicht unterstützt. nicht unterstützt. Integrierter IDE-Controller Integrierter IDE-Controller Ultra DMA 33 / 66 / 100 / 133 Bus Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus Master-Modus Unterstützt PIO-Modus 0~4, Unterstützt PIO-Modus 0~4, Integrierter Serial ATA-Controller Integrierter Serial ATA-Controller Datentransferrate bis zu 1.5Gb/s Datentransferrate bis zu 1.5Gb/s Konform mit der SATA-Spezifikation Konform mit der SATA-Spezifikation Version 1.0. Version 1.0. P4M900-M4 Ver 5.x LAN PHY Audio-Code c Ver 6.x Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY 10 / 100 Mb/s Auto-Negotiation 10 / 100 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion Halb-/ Vollduplex-Funktion ALC883 VT1708B / ALC662 / ALC861VD Unterstützt High-Definition Audio Unterstützt High-Definition Audio 7.1-Kanal-Audioausgabe 5.1-Kanal-Audioausgabe PCI-Steckplatz x2 PCI-Steckplatz Steckplätze PCI Express x16 Steckplatz x1 PCI Express x16 Steckplatz x1 PCI Express x 1-Steckplatz x1 PCI Express x 1-Steckplatz x1 Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1 Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1 IDE-Anschluss x2 IDE-Anschluss x2 SATA-Anschluss x2 SATA-Anschluss x2 Fronttafelanschluss x1 Fronttafelanschluss x1 Front-Audioanschluss x1 Front-Audioanschluss x1 Onboard-An CD-IN-Anschluss x1 CD-IN-Anschluss x1 schluss S/PDIF-Ausgangsanschluss x1 S/PDIF-Ausgangsanschluss x1 CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x1 System-Lüfter-Sockel x1 "CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1 USB-Anschluss x2 USB-Anschluss x2 Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1 Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1 PS/2-Tastatur x1 PS/2-Tastatur x1 PS/2-Maus x1 PS/2-Maus x1 Serieller Anschluss x1 Serieller Anschluss x1 VGA-Anschluss x1 VGA-Anschluss x1 LAN-Anschluss x1 LAN-Anschluss x1 USB-Anschluss x4 USB-Anschluss x4 Audioanschluss x6 Audioanschluss x3 RückseitenE/A Platinengrö ße. OS-Unterst ützung x2 190 mm (B) X 244 mm (L) 190 mm (B) X 244 mm (L) Windows 2K / XP / VISTA Windows 2K / XP / VISTA Biostar behält sich das Recht vor, ohne Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung für ein Ankündigung die Unterstützung für ein Betriebssystem hinzuzufügen oder zu Betriebssystem hinzuzufügen oder zu entfernen. entfernen. 33 Motherboard Manual FRENCH Ver 5.x Ver 6.x Socket 478 Socket 478 Processeurs Intel Pentium 4 / Celeron D Processeurs Intel Pentium 4 / Celeron D jusqu'à 3,4 GHz (pas de prise en charge des jusqu'à 3,4 GHz (pas de prise en charge des UC UC Willamette) UC Willamette) Prend en charge les technologies Prend en charge les technologies Hyper-Threading Hyper-Threading *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. Bus frontal 400 / 533 / 800 MHz Chipset Graphique s Super E/S 95W power consumption. 400 / 533 / 800 MHz VIA P4M900 VIA P4M900 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Mémoire vidéo partagée maximale de 256 Mémoire vidéo partagée maximale de 256 Mo Mo ITE 8712F ITE 8712F Fournit la fonctionnalité de Super E/S Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée. patrimoniales la plus utilisée. Interface à faible compte de broches Interface à faible compte de broches Initiat ives de contrôle environnementales, Initiat ives de contrôle environnementales, Moniteur de matériel Moniteur de matériel Contrôleur de vitesse de ventilateur Contrôleur de vitesse de ventilateur Fonction "Gardien intelligent" de l'ITE Fonction "Gardien intelligent" de l'ITE Fentes DDR2 DIMM x 2 Fentes DDR2 DIMM x 2 Prend en charge la DDR2 533 / 667 Prend en charge la DDR2 533 / 667 Chaque DIMM prend en charge des DDR2 Chaque DIMM prend en charge des DDR2 de 256 Mo /512 Mo / 1Go / 2 Go de 256 Mo /512 Mo / 1Go / 2 Go Mémoire Capacité mémoire max imale de 4 Go Capacité mémoire max imale de 4 Go principale Module de mémo ire DDR2 à mode à simple Module de mémo ire DDR2 à mode à simple voie voie Les DIMM à registres et DIMM avec code Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en correcteurs d'erreurs ne sont pas prises en IDE SATA 34 charge charge Contrôleur IDE intégré Contrôleur IDE intégré Mode principale de Bus Ultra DMA 33 / 66 / Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133 100 / 133 Prend en charge le mode PIO 0~4, Prend en charge le mode PIO 0~4, Contrôleur Serial ATA intégré : Contrôleur Serial ATA intégré : Taux de transfert jusqu'à 1.5 Go/s. Taux de transfert jusqu'à 1.5 Go/s. Conforme à la spécification SATA Version Conforme à la spécification SATA Version 1.0 1.0 P4M900-M4 Ver 5.x LAN PHY Codec audio Fentes Connecteu r embarqué Ver 6.x Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY 10 / 100 Mb/s négociation automatique 10 / 100 Mb/s négociation automatique Half / Full duplex capability Half / Full duplex capability ALC883 VT1708B / ALC662 / ALC861VD Prise en charge de l'audio haute définition Prise en charge de l'audio haute définition Sortie audio à 7.1 voies Sortie audio à 5.1 voies Fente PCI x2 Fente PCI x2 Slot PCI Express x16 x1 Slot PCI Express x16 x1 Slot PCI Express x 1 x1 Slot PCI Express x 1 x1 Connecteur de disquette x1 Connecteur de disquette x1 Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1 Connecteur IDE x2 Connecteur IDE Connecteur SATA x2 Connecteur SATA x2 Connecteur du panneau avant x1 Connecteur du panneau avant x1 x2 Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur d'entrée CD x1 Connecteur d'entrée CD Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1 Embase de ventilateur UC x1 Embase de ventilateur UC x1 x1 Embase de ventilateur système x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Embase d'effacement CMOS x1 Connecteur USB x2 Connecteur USB x2 Connecteur d'alimentation x1 Connecteur d'alimentation x1 (24 broches) Connecteur d'alimentation (24 broches) x1 (4 broches) Connecteur d'alimentation x1 (4 broches) Clavier PS/2 x1 Clavier PS/2 Souris PS/2 x1 Souris PS/2 x1 E/S du Port série x1 Port série x1 panneau Port VGA x1 Port VGA x1 arrière Port LAN x1 Port LAN x1 Port USB x4 Port USB x4 Fiche audio x6 Fiche audio x3 x1 Dimension s de la 190 mm (l) X 244 mm (H) 190 mm (l) X 244 mm (H) carte Windows 2K / XP / VISTA Windows 2K / XP / VISTA Support Biostar se réserve le droit d'ajouter ou de Biostar se réserve le droit d'ajouter ou de SE supprimer le support de SE avec ou sans supprimer le support de SE avec ou sans préavis. préavis. 35 Motherboard Manual ITALIAN Ver 5.x Socket 478 Ver 6.x Socket 478 Processore Intel Pentium 4 / Celeron D fino Processore Intel Pentium 4 / Celeron D fino CPU a 3.4 GHz (Non supporta CPU Willamette) a 3.4 GHz (Non supporta CPU Willamette) Supporto di Hyper-Threading Supporto di Hyper-Threading *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. 95W power consumption. 400 / 533 / 800 MHz 400 / 533 / 800 MHz VIA P4M900 VIA P4M900 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics La memoria video condivisa massima è di La memoria video condivisa massima è di 256MB 256MB ITE 8712F ITE 8712F Fornisce le funzionalità legacy Super I/O Fornisce le funzionalità legacy Super I/O usate più comunemente. usate più comunemente. Interfaccia LPC (Low Pin Count) Interfaccia LPC (Low Pin Count) Funzioni di controllo dell’ambiente: Funzioni di controllo dell’ambiente: Monitoraggio hardware Monitoraggio hardware Controller velocità ventolina Controller velocità ventolina Funzione "Smart Guardian" di ITE Funzione "Smart Guardian" di ITE Alloggi DIMM DDR2 x 2 Alloggi DIMM DDR2 x 2 Supporto di DDR2 533 / 667 Supporto di DDR2 533 / 667 Ciascun DIMM supporta DDR2 256MB Ciascun DIMM supporta DDR2 256MB Memoria /512MB / 1GB / 2GB /512MB / 1GB / 2GB principale Capacità massima della memoria 4GB Capacità massima della memoria 4GB FSB Chipset Grafica Super I/O Modulo di memoria DDR2 a canale s ingolo Modulo di memoria DDR2 a canale s ingolo IDE SATA DIMM registrati e DIMM ECC non sono DIMM registrati e DIMM ECC non sono supportati supportati Controller IDE integrato Controller IDE integrato Modalità Bus Master Ultra DMA 33 / 66 / Modalità Bus Master Ultra DMA 33 / 66 / 100 / 133 100 / 133 Supporto modalità PIO Mode 0-4 Supporto modalità PIO Mode 0-4 Controller Serial ATA integrato Controller Serial ATA integrato Velocità di trasferimento dei dati fino a 1.5 Velocità di trasferimento dei dati fino a 1.5 Gb/s. Gb/s. Compatibile specifiche SATA Versione 1.0. Compatibile specifiche SATA Versione 1.0. LAN PHY 36 Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY Negoziazione automatica 10 / 100 Mb/s Negoziazione automatica 10 / 100 Mb/s Capacità Half / Full Duplex Capacità Half / Full Duplex P4M900-M4 Ver 5.x Codec audio Alloggi Ver 6.x ALC883 VT1708B / ALC662 / ALC861VD Supporto audio High-Definition (HD) Supporto audio High-Definition (HD) Uscita audio 7.1 canali Uscita audio 5.1 canali Alloggio PCI x2 Alloggio PCI Alloggio PCI Express x16 x1 Alloggio PCI Express x16 x2 x1 Alloggio PCI Express x1 x1 Alloggio PCI Express x1 x1 Connettore floppy x1 Connettore floppy x1 Connettore Porta stampante x1 Connettore Porta stampante x1 Connettore IDE x2 Connettore IDE x2 Connettore SATA x2 Connettore SATA x2 Connettore pannello frontale x1 Connettore pannello frontale x1 Connettore audio frontale x1 Connettore audio frontale x1 Connettore CD-in x1 Connettore CD-in x1 Connettori Connettore output SPDIF x1 Connettore output SPDIF x1 su scheda Collettore ventolina CPU x1 Collettore ventolina CPU x1 Collettore ventolina sistema x1 Collettore ventolina sistema x1 Collettore cancellaz ione CMOS x1 Collettore cancellaz ione CMOS x1 Connettore USB x2 Connettore USB x2 Connettore alimentazione x1 Connettore alimentazione x1 x1 Connettore alimentazione (24 pin) Connettore alimentazione (24 pin) (4 pin) x1 (4 pin) Tastiera PS/2 x1 Tastiera PS/2 x1 Mouse PS/2 x1 Mouse PS/2 x1 I/O Porta seriale x1 Porta seriale x1 pannello Porta VGA x1 Porta VGA x1 posteriore Porta LAN x1 Porta LAN x1 Porta USB x4 Porta USB x4 Connettore audio x6 Connettore audio x3 Dimension i scheda Sistemi operativi supportati 190 mm (larghezza) x 244 mm (altezza) 190 mm (larghezza) x 244 mm (altezza) Windows 2K / XP / VISTA Windows 2K / XP / VISTA Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema operativo senza preavviso. operativo senza preavviso. 37 Motherboard Manual SPANISH Ver 5.x CPU Ver 6.x Conector 478 Conector 478 Procesador Intel Pentium 4 / Celeron D Procesador Intel Pentium 4 / Celeron D hasta 3,4 GHz (no soporta CPU Willamette) hasta 3,4 GHz (no soporta CPU Willamette) Admite Hyper-Threading Admite Hyper-Threading *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. 95W power consumption. FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz Conjunto VIA P4M900 VIA P4M900 de chips VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Memoria máx ima de vídeo compartida de Memoria máx ima de vídeo compartida de 256MB 256MB ITE 8712F ITE 8712F Gráficos Le ofrece las funcionalidades heredadas de Le ofrece las funcionalidades heredadas de Súper E/S uso más común Súper E/S. uso más común Súper E/S. Interfaz de cuenta Low Pin Interfaz de cuenta Low Pin Iniciativas de control de entorno, Iniciativas de control de entorno, Monitor hardware Monitor hardware Controlador de velocidad de ventilador Controlador de velocidad de ventilador Función "Guardia inteligente" de ITE Función "Guardia inteligente" de ITE Ranuras DIMM DDR2 x 2 Ranuras DIMM DDR2 x 2 Admite DDR2 de 533 / 667 Admite DDR2 de 533 / 667 Cada DIMM admite DDR de 256MB /512MB Cada DIMM admite DDR de 256MB /512MB Memoria /1GB / 2GB /1GB / 2GB principal Capacidad máxima de memoria de 4GB Capacidad máxima de memoria de 4GB Módulo de memoria DDR2 de canal Sencillo Módulo de memoria DDR2 de canal Sencillo IDE SATA Red Local No admite DIMM registrados o DIMM No admite DIMM registrados o DIMM compatibles con ECC compatibles con ECC Controlador IDE integrado Controlador IDE integrado Modo bus maestro Ultra DMA 33 / 66 / 100 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 / 133 Soporte los Modos PIO 0~4, Soporte los Modos PIO 0~4, Controlador ATA Serie Integrado Controlador ATA Serie Integrado Tasas de transferencia de hasta 1.5 Gb/s. Tasas de transferencia de hasta 1.5 Gb/s. Compatible con la vers ión SATA 1.0. Compatible con la vers ión SATA 1.0. Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY Negociación de 10 / 100 Mb/s Funciones Half / Full dúplex 38 Negociación de 10 / 100 Mb/s Funciones Half / Full dúplex P4M900-M4 Ver 5.x Códecs de sonido Ranuras Conectore s en placa Ver 6.x ALC883 VT1708B / ALC662 / ALC861VD Soporte de sonido de Alta Definición Soporte de sonido de Alta Definición Salida de sonido de 7.1 canales Salida de sonido de 5.1 canales Ranura PCI X2 Ranura PCI X2 Ranura PCI Express x16 X1 Ranura PCI Express x16 X1 Ranura PCI express x 1 X1 Ranura PCI express x 1 X1 Conector disco flexible X1 Conector disco flexible X1 Conector Puerto de impresora X1 Conector Puerto de impresora X1 Conector IDE X2 Conector IDE X2 Conector SATA X2 Conector SATA X2 Conector de panel frontal X1 Conector de panel frontal X1 Conector de sonido frontal X1 Conector de sonido frontal X1 Conector de entrada de CD X1 Conector de entrada de CD X1 Conector de salida S/PDIF X1 Conector de salida S/PDIF X1 Cabecera de vent ilador de CPU X1 Cabecera de vent ilador de CPU X1 Cabecera de vent ilador de Cabecera de vent ilador de sistema X1 sistema Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1 Conector USB X2 Conector USB X2 Conector de alimentación X1 Conector de alimentación X1 (24 patillas) Conector de alimentación X1 (24 patillas) X1 (4 patillas) Conector de alimentación X1 (4 patillas) Teclado PS/2 X1 Teclado PS/2 Ratón PS/2 X1 Ratón PS/2 X1 Puerto serie X1 Puerto serie X1 trasero de Puerto VGA X1 Panel E/S Tamaño de la placa Soporte de sistema operativo X1 X1 Puerto VGA Puerto de red local X1 Puerto de red local X1 Puerto USB X4 Puerto USB X4 Conector de sonido X6 Conector de sonido X3 190mm. (A) X 244 Mm. (H) 190mm. (A) X 244 Mm. (H) Windows 2K / XP / VISTA Windows 2K / XP / VISTA Biostar se reserva el derecho de añadir o Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin retirar el soporte de cualquier SO con o sin aviso previo. aviso previo. 39 Motherboard Manual PORTUGUESE Ver 5.x Socket 478 Ver 6.x Socket 478 Processador Intel Pentium 4 / Celeron D até Processador Intel Pentium 4 / Celeron D até CPU 3,4 GHz (não suporta a CPU Willamette) 3,4 GHz (não suporta a CPU Willamette) Suporta as tecnologias Hyper-Threading Suporta as tecnologias Hyper-Threading *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. FSB Chipset Placa gráfica 95W power consumption. 400 / 533 / 800 MHz 400 / 533 / 800 MHz VIA P4M900 VIA P4M900 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Memória de vídeo máxima part ilhada: 256 Memória de vídeo máxima part ilhada: 256 MB MB ITE 8712F ITE 8712F Proporciona as funcionalidades mais Proporciona as funcionalidades mais utilizadas em termos da especificação utilizadas em termos da especificação Especificaç Super I/O. Super I/O. ão Super Interface LPC (Low Pin Count). Interface LPC (Low Pin Count). I/O Iniciativas para controlo do ambiente Iniciativas para controlo do ambiente Monitorização do hardware Monitorização do hardware Controlador da velocidade da ventoinha Controlador da velocidade da ventoinha Função "Smart Guardian" da ITE Função "Smart Guardian" da ITE Ranhuras DIMM DDR2 x 2 Ranhuras DIMM DDR2 x 2 Suporta módulos DDR2 533 / 667 Suporta módulos DDR2 533 / 667 Cada módulo DIMM suporta uma memória Cada módulo DIMM suporta uma memória Memória DDR2 de 256MB /512 MB / 1 GB / 2GB DDR2 de 256MB /512 MB / 1 GB / 2GB principal Capacidade máxima de memória: 4 GB Capacidade máxima de memória: 4 GB Módulo de memória DDR2 de canal simples Módulo de memória DDR2 de canal simples IDE SATA Os módulos DIMM registados e os DIMM Os módulos DIMM registados e os DIMM ECC não são suportados ECC não são suportados Controlador IDE integrado Controlador IDE integrado Modo Bus master Ultra DMA 33 / 66 / 100 / Modo Bus master Ultra DMA 33 / 66 / 100 / 133 133 Suporta o modo PIO 0~4, Suporta o modo PIO 0~4, Controlador Serial ATA integrado Controlador Serial ATA integrado Velocidades de transmissão de dados até Velocidades de transmissão de dados até 1.5 Gb/s. 1.5 Gb/s. Compatibilidade com a especificação SATA Compatibilidade com a especificação SATA LAN PHY 40 versão 1.0. versão 1.0. Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY Auto negociação de 10 / 100 MB/s Auto negociação de 10 / 100 MB/s Capacidade semi/full-duplex Capacidade semi/full-duplex P4M900-M4 Ver 5.x Ver 6.x ALC883 VT1708B / ALC662 / ALC861VD Codec de Suporta a especificação High-Definition Suporta a especificação High-Definition som Audio Audio Saída de áudio de 7.1 canais Ranhuras Saída de áudio de 5.1 canais Ranhura PCI x2 Ranhura PCI x2 Ranhura PCI Express x16 x1 Ranhura PCI Express x16 x1 Ranhura PCI Express x 1 x1 Ranhura PCI Express x 1 x1 Conector da unidade de Conector da unidade de disquetes x1 disquetes Conector da para impressora x1 Conector da para impressora x1 Conector IDE x2 Conector IDE x2 Conector SATA x2 Conector SATA x2 Conector do painel frontal x1 Conector do painel frontal x1 Conector de áudio frontal x1 Conector de áudio frontal x1 Conector para entrada de CDs x1 Conector para entrada de CDs x1 Conectore Conector de saída S/PDIF x1 Conector de saída S/PDIF x1 s na placa Conector da ventoinha da CPU x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema Conector da ventoinha do x1 Conector para limpeza do CMOS x1 x2 Conector USB x2 x1 Conector de alimentação x1 x1 Conector de alimentação (24 pinos) (4 pinos) painel traseiro Tamanho da placa Sistemas x1 Conector para limpeza do CMOS x1 Conector de alimentação (24 pinos) Saídas no sistema Conector USB Conector de alimentação Entradas/ x1 x1 (4 pinos) Teclado PS/2 x1 Teclado PS/2 x1 Rato PS/2 x1 Rato PS/2 x1 Porta série x1 Porta série x1 Porta VGA x1 Porta VGA x1 Porta LAN x1 Porta LAN x1 Porta USB x4 Porta USB x4 Tomada de áudio x6 Tomada de áudio x3 190 mm (L) X 244 mm (A) Windows 2K / XP / VISTA 190 mm (L) X 244 mm (A) Windows 2K / XP / VISTA operativos A Biostar reserva-se o direito de adicionar A Biostar reserva-se o direito de adicionar suportado ou remover suporte para qualquer sistema ou remover suporte para qualquer sistema s operativo com ou sem aviso prévio. operativo com ou sem aviso prévio. 41 Motherboard Manual POLISH Ver 5.x Socket 478 Ver 6.x Socket 478 Procesor Intel Pentium 4 / Celeron D do 3,4 Procesor Intel Pentium 4 / Celeron D do 3,4 Procesor GHz (brak obsługi procesorów Willamette) GHz (brak obsługi procesorów Willamette) Obsługa Hyper-Threading Technology Obsługa Hyper-Threading Technology *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. FSB Chipset Grafika Pamięć główna 95W power consumption. 400 / 533 / 800 MHz 400 / 533 / 800 MHz VIA P4M900 VIA P4M900 VIA VT8237A VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics Maks. wielkość współdzielonej pamięci Maks. wielkość współdzielonej pamięci video wynosi 256MB video wynosi 256MB Gniazda DDR2 DIMM x 2 Gniazda DDR2 DIMM x 2 Obsługa DDR2 533 / 667 Obsługa DDR2 533 / 667 Każde gniazdo DIMM obsługuje moduły Każde gniazdo DIMM obsługuje moduły 256MB /512MB / 1GB / 2GB DDR2 256MB /512MB / 1GB / 2GB DDR2 Maks. wielkość pamięci 4GB Maks. wielkość pamięci 4GB Moduł pamięci DDR2 z trybem Moduł pamięci DDR2 z trybem pojedynczego kanału pojedynczego kanału Brak obsługi Registered DIMM oraz ECC Brak obsługi Registered DIMM oraz ECC DIMM DIMM ITE 8712F ITE 8712F Zapewnia najbardziej powszechne funkcje Zapewnia najbardziej powszechne funkcje Super I/O IDE SATA 42 Super I/O. Super I/O. Interfejs Low Pin Count Interfejs Low Pin Count Funkcje kontroli warunków pracy, Funkcje kontroli warunków pracy, Monitor H/W Monitor H/W Kontroler prędkości wentylatora Kontroler prędkości wentylatora Funkcja ITE "Smart Guardian" Funkcja ITE "Smart Guardian" Zintegrowany kontroler IDE Zintegrowany kontroler IDE Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Master obsługa PIO tryb 0~4, obsługa PIO tryb 0~4, Zintegrowany kontroler Serial ATA Zintegrowany kontroler Serial ATA Transfer danych do 1.5 Gb/s. Transfer danych do 1.5 Gb/s. Zgodność ze specyfikacją SATA w wersji Zgodność ze specyfikacją SATA w wersji 1.0. 1.0. P4M900-M4 Ver 5.x Ver 6.x Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY 10 / 100 Mb/s z automatyczną negocjacją 10 / 100 Mb/s z automatyczną negocjacją LAN PHY Kodek dźwiękowy Gniazda Złącza wbudowan e szybkości szybkości Działanie w trybie połowicznego / pełnego Działanie w trybie połowicznego / pełnego dupleksu dupleksu ALC883 VT1708B / ALC662 / ALC861VD Obsługa High-Definition Audio Obsługa High-Definition Audio 7.1 kanałowe wyjście audio 5.1 kanałowe wyjście audio Gniazdo PCI x2 Gniazdo PCI x2 Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1 Gniazdo PCI Express x 1 x1 Gniazdo PCI Express x 1 x1 Złącze napędu dyskietek x1 Złącze napędu dyskietek x1 Złącze Port drukarki x1 Złącze Port drukarki x1 Złącze IDE x2 Złącze IDE x2 Złącze SATA x2 Złącze SATA x2 Złącze panela przedniego x1 Złącze panela przedniego x1 Przednie złącze audio x1 Przednie złącze audio x1 Złącze wejścia CD x1 Złącze wejścia CD x1 Złącze wyjścia S/PDIF x1 Złącze wyjścia S/PDIF x1 Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora systemowego Złącze główkowe wentylatora x1 Złącze główkowe kasowania Back Panel I/O Wymiary systemowego x1 Złącze główkowe kasowania CMOS x1 CMOS x1 Złącze USB x2 Złącze USB x2 Złącze zasilania (24 pinowe) x1 Złącze zasilania (24 pinowe) x1 Złącze zasilania (4 pinowe) x1 Złącze zasilania (4 pinowe) x1 Klawiatura PS/2 x1 Klawiatura PS/2 x1 Mysz PS/2 x1 Mysz PS/2 x1 Port szeregowy x1 Port szeregowy x1 Port VGA x1 Port VGA x1 Port LAN x1 Port LAN x1 Port USB x4 Port USB x4 Gniazdo audio x6 Gniazdo audio x3 190 mm (S) X 244 mm (W) 190 mm (S) X 244 mm (W) Obsluga Windows 2K / XP / VISTA Windows 2K / XP / VISTA systemu Biostar zastrzega sobie prawo dodawania Biostar zastrzega sobie prawo dodawania płyty operacyjn lub odwoływania obsługi dowolnego ego lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia. systemu operacyjnego bez powiadomienia. 43 Motherboard Manual RUSSIAN CPU (централь ный процессор ) Ver 5.x Ver 6.x Гнездо 478 Процессор Intel Pentium 4 / Celeron D до 3.4 ГГц ( не поддерживает центральные процессоры Willamette) Поддержка технологий Hyper-Threading Technology *It is recommended to use processors with 95W power consumption. 400 / 533 / 800 МГц Гнездо 478 Процессор Intel Pentium 4 / Celeron D до 3.4 ГГц ( не поддерживает центральные процессоры Willamette) Поддержка технологий Hyper-Threading Technology *It is recommended to use processors with 95W power consumption. 400 / 533 / 800 МГц FSB Набор VIA P4M900 микросхе VIA VT8237A м Графика Chrome9 HC 3D / 2D Graphics Максимальная совместно используемая видео память составляет 256 МБ Слоты DDR2 DIMM x 2 Поддержка DDR2 533 / 667 Каждый модуль DIMM поддерживает 256MB / 512МБ / 1ГБ / 2ГБ DDR2 Основная Максимальная ёмкость памяти 4 ГБ память Модуль памяти с одноканальным режимом DDR2 Не поддерживает зарегистрированные модули DIMM and ECC DIMM ITE 8712F Обеспечивает наиболее используемые действующие функциональные возможности Super I/O. Интерфейс с низким количеством выводов Super I/O Инициативы по охране окружающей среды, Аппаратный монитор Регулятор скорости Функция ITE "Smart Guardian" (Интеллектуальная защита) Встроенное устройство управления встроенными интерфейсами устройств IDE Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133 Поддержка режима PIO 0~4, Встроенное последовательное устройство управления ATA скорость передачи данных до 1.5 SATA гигабит/с. Соответствие спецификации SATA версия 1.0. 44 VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Максимальная совместно используемая видео память составляет 256 МБ Слоты DDR2 DIMM x 2 Поддержка DDR2 533 / 667 Каждый модуль DIMM поддерживает 256MB / 512МБ / 1ГБ / 2ГБ DDR2 Максимальная ёмкость памяти 4 ГБ Модуль памяти с одноканальным режимом DDR2 Не поддерживает зарегистрированные модули DIMM and ECC DIMM ITE 8712F Обеспечивает наиболее используемые действующие функциональные возможности Super I/O. Интерфейс с низким количеством выводов Инициативы по охране окружающей среды, Аппаратный монитор Регулятор скорости Функция ITE "Smart Guardian" (Интеллектуальная защита) Встроенное устройство управления встроенными интерфейсами устройств Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133 Поддержка режима PIO 0~4, Встроенное последовательное устройство управления ATA скорость передачи данных до 1.5 гигабит/с. Соответствие спецификации SATA версия 1.0. P4M900-M4 Ver 5.x Ver 6.x Realtek RTL 8201CL PHY Локальна я сеть Звуковой кодек Слоты Встроенн Realtek RTL 8201CL PHY Автоматическое согласование 10 / 100 Автоматическое согласование 10 / 100 Мб/с Мб/с Частичная / полная дуплексная Частичная / полная дуплексная способность способность ALC883 VT1708B / ALC662 / ALC861VD Звуковая поддержка High-Definition Звуковая поддержка High-Definition 7.1канальный звуковой выход 5.1канальный звуковой выход Слот PCI x2 Слот PCI x2 Слот PCI Express x16 x1 Слот PCI Express x16 x1 Слот PCI Express x 1 x1 Слот PCI Express x 1 x1 Разъём НГМД Разъём Порт подключения принтера x1 x1 x1 Разъём НГМД Разъём Порт подключения принтера x1 Разъём IDE x2 Разъём IDE x2 Разъём SATA x2 Разъём SATA x2 Разъём на лицевой панели x1 Разъём на лицевой панели x1 Входной звуковой разъём x1 Входной звуковой разъём x1 Разъём ввода для CD x1 Разъём ввода для CD x1 Разъём вывода для S/PDIF x1 Разъём вывода для S/PDIF x1 Контактирующее приспособление ый разъём Контактирующее приспособление вентилятора центрального процессора x1 вентилятора центрального процессора x1 Контактирующее приспособление Контактирующее приспособление вентилятора системы вентилятора системы x1 Открытое контактирующее Задняя панель средств ввода-выв ода приспособление CMOS x1 приспособление CMOS x1 USB-разъём x2 USB-разъём x2 Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1 Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1 Клавиатура PS/2 x1 Клавиатура PS/2 x1 Мышь PS/2 x1 Мышь PS/2 x1 Последовательный порт x1 Последовательный порт x1 Порт VGA x1 Порт VGA x1 Порт LAN x1 Порт LAN x1 USB-порт x4 USB-порт x4 x6 наушников Гнездо для подключения наушников Размер панели Гнездо для подключения 190 мм (Ш) X 244 мм (В) Windows 2K / XP / VISTA Поддержк а OS x1 Открытое контактирующее x3 190 мм (Ш) X 244 мм (В) Windows 2K / XP / VISTA Biostar сохраняет за собой право Biostar сохраняет за собой право добавлять или удалять средства добавлять или удалять средства обеспечения для OS с или без обеспечения для OS с или без предварительного уведомления. предварительного уведомления. 45 Motherboard Manual ARABIC Ver 5.x وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ Ver 6.x 478ﻡﻘﺒﺲ 478ﻡﻘﺒﺲ ﺏﺘﺮدد ﻳﺼﻞ Intel Pentium 4 / Celeron Dﻡﻌﺎﻟﺠﺎت ﺏﺘﺮدد ﻳﺼﻞ Intel Pentium 4 / Celeron Dﻡﻌﺎﻟﺠﺎت إﻟﻰ 3.4ﺝﻴﺠﺎ هﺮﺕﺰ إﻟﻰ 3.4ﺝﻴﺠﺎ هﺮﺕﺰ Willametteﻻ ﺕﺪﻋﻢ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ Willametteﻻ ﺕﺪﻋﻢ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ Hyper-Threading Technologyﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت Hyper-Threading Technologyﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت *It is recommended to use processors with *It is recommended to use processors with 95W power consumption. اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ ﺏﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت ﻡﻴﺠﺎ هﺮﺕﺰ 400 / 533 / 800ﺕﺮدد Super I/O VIA P4M900 VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics ﻡﻴﺠﺎ ﺏﺎﻳﺖ256أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ ﻡﻴﺠﺎ ﺏﺎﻳﺖ256أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ ﻋﺪد2 ﻡﻴﺠﺎ ﺏﺎﻳﺖ 533 / 667ﺳﻌﺎت DDR2ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﺳﻌﺔ DDR2ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﺳﻌﺔ DDR2ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻡﻴﺠﺎ ﺏﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺏﺎﻳﺖ 2 /ﺝﻴﺠﺎ /512ﻡﻴﺠﺎ ﺏﺎﻳﺖ256 ﻡﻴﺠﺎ ﺏﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺏﺎﻳﺖ 2 /ﺝﻴﺠﺎ /512ﻡﻴﺠﺎ ﺏﺎﻳﺖ256 ﺏﺎﻳﺖ ﺏﺎﻳﺖ ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 4ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 4ﺝﻴﺠﺎ ﺏﺎﻳﺖ أﺣﺎدﻳﺔ اﻟﻘﻨﺎةDDR2وﺣﺪة ذاآﺮة أﺣﺎدﻳﺔ اﻟﻘﻨﺎةDDR2وﺣﺪة ذاآﺮة اﻟﻤﺴﺠﻠﺔ وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡﻊ DIMMﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة اﻟﻤﺴﺠﻠﺔ وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡﻊ DIMMﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة ECC ECC ITE 8712F ITE 8712F اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎSuper I/O .ﺕﻮﻓﺮ وﻇﻴﻔﺔ اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎSuper I/O .ﺕﻮﻓﺮ وﻇﻴﻔﺔ Low Pin Count Interfaceﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ Low Pin Count Interfaceﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ : وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ : ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ ITEﻡﻦ ""Smart Guardianوﻇﻴﻔﺔ ITEﻡﻦ ""Smart Guardianوﻇﻴﻔﺔ ﻡﺘﻜﺎﻡﻞ IDEﻡﺘﺤﻜﻢ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ وﺿﻊ رﺋﻴﺴﻲ وﺿﻊ رﺋﻴﺴﻲ PIO Mode 0~4دﻋﻢ وﺿﻊ PIO Mode 0~4دﻋﻢ وﺿﻊ ﻡﺘﻜﺎﻡﻞ Serial ATAﻡﺘﺤﻜﻢ SATA ﻓﺘﺤﺔ DDR2 DIMM ﻋﺪد2 ﻡﻴﺠﺎ ﺏﺎﻳﺖ 533 / 667ﺳﻌﺎت DDR2ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﻡﺘﻜﺎﻡﻞ IDEﻡﺘﺤﻜﻢ ﻡﻨﻔﺬ IDE ﻡﻴﺠﺎ هﺮﺕﺰ 400 / 533 / 800ﺕﺮدد VIA VT8237A ﻓﺘﺤﺔ DDR2 DIMM اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ 95W power consumption. ﻡﺘﻜﺎﻡﻞ Serial ATAﻡﺘﺤﻜﻢ ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺏﺖ /ﺙﺎﻥﻴﺔ . ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺏﺖ /ﺙﺎﻥﻴﺔ . 1.0.اﻹﺹﺪار SATAﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت 1.0.اﻹﺹﺪار SATAﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت 46 P4M900-M4 Ver 5.x ﺵﺒﻜﺔ داﺥﻠﻴﺔ آﻮدﻳﻚ اﻟﺼﻮت اﻟﻔﺘﺤﺎت Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 100/10ﻡﻴﺠﺎ ﺏﺎﻳﺖ /ﺙﺎﻥﻴﺔ ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 100/10ﻡﻴﺠﺎ ﺏﺎﻳﺖ /ﺙﺎﻥﻴﺔ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ ALC883 VT1708B / ALC662 / ALC861VD ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ 7.1ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت 5.1ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت ﻓﺘﺤﺔ PCI ﻋﺪد 2 ﻓﺘﺤﺔ PCI ﻋﺪد 2 ﻓﺘﺤﺔ PCI Express x16 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Express x16 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Express x 1 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Express x 1 ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ IDE ﻋﺪد 2 ﻡﻨﻔﺬ IDE ﻋﺪد 2 ﻡﻨﻔﺬ SATA ﻋﺪد 2 ﻡﻨﻔﺬ SATA ﻋﺪد 2 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻋﺪد 1 ﻡﻨﻔﺬ CD-IN ﻋﺪد 1 ﻡﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 ﻡﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢ CMOS ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢ CMOS ﻋﺪد 1 ﻡﻨﻔﺬ USB ﻋﺪد 2 ﻡﻨﻔﺬ USB ﻋﺪد 2 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺏﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺏﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )4دﺏﺎﺏﻴﺲ( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )4دﺏﺎﺏﻴﺲ( ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ PS/2 ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ PS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻡﻨﻔﺬ VGA ﻋﺪد 1 ﻡﻨﻔﺬ VGA ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﺎﻓﺬ USB ﻋﺪد 4 ﻡﻨﺎﻓﺬ USB ﻋﺪد 4 ﻋﺪد6 ﻡﻘﺒﺲ ﺹﻮت اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻡﻨﻔﺬ CD-IN اﻟﻠﻮﺣﺔ ﻡﻨﺎﻓﺬ دﺥﻞ/ﺥﺮج اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﻡﻘﺒﺲ ﺹﻮت ﺣﺠﻢ اﻟﻠﻮﺣﺔ دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ 47 Ver 6.x 190ﻡﻢ )ﻋﺮض( 244 Xﻡﻢ )ارﺕﻔﺎع( Windows 2K / XP / VISTA ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم Biostarﺕﺤﺘﻔﻆ ﺕﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ﺏﺪون إﺥﻄﺎر . ﻋﺪد3 190ﻡﻢ )ﻋﺮض( 244 Xﻡﻢ )ارﺕﻔﺎع( Windows 2K / XP / VISTA ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم Biostarﺕﺤﺘﻔﻆ ﺕﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ﺏﺪون إﺥﻄﺎر . Motherboard Manual JAPANESE Ver 5.x Socket 478 Ver 6.x Socket 478 Intel Pent ium 4 / Celeron D processor up to Intel Pent ium 4 / Celeron D processor up to CPU 3.4 GHz (Willamette CPUはサポートしませ 3.4 GHz (Willamette CPUはサポートしませ ん) ん) Hyper-Threading Technology をサポートしま Hyper-Threading Technology をサポートしま す す *It is recommended to use processors with *It is recommended to use processors with FSB 95W power consumption. 95W power consumption. 400 / 533 / 800 MHz 400 / 533 / 800 MHz チップセッ VIA P4M900 ト VIA VT8237A VIA P4M900 VIA VT8237A グラフィッ Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics クス 最大の共有ビデオメモリは256MBです 最大の共有ビデオメモリは256MBです DDR2 DIMMスロット x 2 DDR2 DIMMスロット x 2 DDR2 533 / 667をサポート DDR2 533 / 667をサポート 各DIMMは 256/512MB/1GB/2GB DDR2をサ 各DIMMは 256/512MB/1GB/2GB DDR2をサ メインメモ リ Super I/O IDE SATA 48 ポート ポート 最大メモリ容量4GB 最大メモリ容量4GB シングル チャンネルモードDDR2メモリモジュ シングル チャンネルモードDDR2メモリモジュ ール ール 登録済みDIMMとECC DIMMはサポートされま 登録済みDIMMとECC DIMMはサポートされま せん せん ITE 8712F ITE 8712F もっとも一般に使用されるレガシーSuper I/O もっとも一般に使用されるレガシーSuper I/O 機能を採用しています。 機能を採用しています。 低ピンカウントインターフェイス 低ピンカウントインターフェイス 環境コントロールイニシアチブ、 環境コントロールイニシアチブ、 H/Wモニター H/Wモニター ファン速度コントローラ/ モニター ファン速度コントローラ/ モニター ITEの「スマートガーディアン」機能 ITEの「スマートガーディアン」機能 統合IDEコントローラ 統合IDEコントローラ Ultra DMA 33 / 66 / 100 / 133バスマスタモー Ultra DMA 33 / 66 / 100 / 133バスマスタモー ド ド PIO Mode 0~4のサポート、 PIO Mode 0~4のサポート、 統合シリアルATAコントローラ 統合シリアルATAコントローラ 最高1.5 Gb/秒のデータ転送速度 最高1.5 Gb/秒のデータ転送速度 SATAバージョン1.0仕様に準拠。 SATAバージョン1.0仕様に準拠。 P4M900-M4 Ver 5.x LAN PHY サウンド Codec スロット Realtek RTL 8201CL PHY Realtek RTL 8201CL PHY 10 / 100 Mb/秒のオートネゴシエーション 10 / 100 Mb/秒のオートネゴシエーション 半/全二重機能 半/全二重機能 ALC883 VT1708B / ALC662 / ALC861VD ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート 7.1 チャンネルオーディオアウト 5.1 チャンネルオーディオアウト PCIスロット x2 PCIスロット x2 PCI Express x16スロット x1 PCI Express x16スロット x1 PCI Express x 1スロット x1 PCI Express x 1スロット x1 フロッピーコネクタ x1 フロッピーコネクタ x1 プリンタポートコネクタ x1 プリンタポートコネクタ x1 IDEコネクタ x2 IDEコネクタ x2 SATAコネクタ x2 SATAコネクタ x2 フロントパネルコネクタ x1 フロントパネルコネクタ x1 フロントオーディオコネクタ x1 フロントオーディオコネクタ x1 x1 CDインコネクタ x1 S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1 CPUファンヘッダ x1 CPUファンヘッダ x1 システムファンヘッダ x1 システムファンヘッダ x1 CMOSクリアヘッダ x1 CMOSクリアヘッダ x1 USBコネクタ x2 USBコネクタ x2 オンボード CDインコネクタ コネクタ 背面パネル I/O ボードサイ ズ OSサポー ト Ver 6.x 電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1 電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1 PS/2キーボード x1 PS/2キーボード x1 PS/2マウス x1 PS/2マウス x1 シリアルポート x1 シリアルポート x1 VGAポート x1 VGAポート x1 LANポート x1 LANポート x1 USBポート x4 USBポート x4 オーディオジャック x6 オーディオジャック x3 190 mm (幅) X 244 mm (高さ) 190 mm (幅) X 244 mm (高さ) Windows 2K / XP / VISTA Windows 2K / XP / VISTA Biostarは事前のサポートなしにOSサポートを Biostarは事前のサポートなしにOSサポートを 追加または削除する権利を留保します。 追加または削除する権利を留保します。 2009/02/17 49
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2009:02:17 18:17:21+08:00 Modify Date : 2009:02:17 18:17:21+08:00 Page Count : 49 Creation Date : 2009:02:17 10:17:21Z Mod Date : 2009:02:17 10:17:21Z Producer : Acrobat Distiller 5.0 (Windows) Author : 97031 Metadata Date : 2009:02:17 10:17:21Z Creator : 97031 Title : Microsoft Word - P4M90-M4_090217C.docEXIF Metadata provided by EXIF.tools