Biostar P4M900 M4 Owners Manual P4M90 M4_090217C

2014-07-31

: Biostar Biostar-P4M900-M4-Owners-Manual biostar-p4m900-m4-owners-manual biostar pdf

Open the PDF directly: View PDF PDF.
Page Count: 49

P4M900-M4 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: INTRODUCTION ................................... 3
1.1 Before You Start ................................................................................ 3
1.2 Package Checklist............................................................................. 3
1.3 Motherboard FeaturesS.................................................................... 4
1.4 Rear Panel Connectors (for Ver 5.x)............................................... 6
1.5 Rear Panel Connectors (for Ver 6.x)............................................... 6
1.6 Motherboard Layout......................................................................... 7
Chapter 2: Hardware Installation .......................... 8
2.1 Installing Central Processing Unit (CPU)....................................... 8
2.2 Fan Headers ....................................................................................... 9
2.3 Installing System Memory .............................................................. 10
2.4 Connectors and Slots ....................................................................... 11
Chapter 3: Headers & Jumpers Setup .................. 13
3.1 How to Setup Jumpers .................................................................... 13
3.2 Detail Settings.................................................................................. 13
Chapter 4: USEFUL HELP ..................................... 19
4.1 Driver Installation Note.................................................................. 19
4.2 Award BIOS Beep Code .................................................................. 20
4.3 Extra Information............................................................................ 20
4.4 Troubleshooting............................................................................... 22
Chapter 5: WarpSpeeder™ .................................. 23
5.1 Introduction...................................................................................... 23
5.2 System Requirement....................................................................... 23
5.3 Installation ....................................................................................... 24
5.4 WarpSpeeder™................................................................................. 25
Appendencies: SPEC In Other Language .............. 32
German.................................................................................................................. 32
French .................................................................................................................... 34
Italian..................................................................................................................... 36
Spanish ................................................................................................................... 38
Portuguese ............................................................................................................ 40
Polish...................................................................................................................... 42
Russian ................................................................................................................... 44
Arabic..................................................................................................................... 46
Japanese ................................................................................................................ 48
P4M900-M4
3
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
1.2 PACKAGE CHECKLIST
HDD Cable X 1
User’s Manual X 1
Fully Setup Driver CD X 1
Rear I/O Panel for ATX Case X 1
FDD Cable X 1 (optional)
Serial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF Cable X 1 (optional)
Serial ATA Power Cable X 1 (optional)
Motherboard Manual
4
1.3 MOTHERBOARD FEATURES
Ver 5.x Ver 6.x
CPU
Socket 478
Intel Pent ium 4 / Celeron D processor up to
3.4 GHz (Do not support Willamette CPU.)
Supports Hyper Threading technology
*It is recommended to use processors with
95W power consumption.
Socket 478
Intel Pent ium 4 / Celeron D processor up to
3.4 GHz (Do not support Willamette CPU.)
Supports Hyper Threading technology
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipset VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Graphic Chrome9 HC 3D / 2D Graphics
Max Shared Video Memory is 256 MB
Chrome9 HC 3D / 2D Graphics
Max Shared Video Memory is 256 MB
Super I/O
ITE 8718F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control in itiat ives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
ITE 8718F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control in itiat ives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DIMM Slots x 2
Supports DDR2 533 / 667
Each DIMM supports 256/512MB/1GB/2GB
DDR2
Max Memory Cap icity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported
DIMM Slots x 2
Supports DDR2 533 / 667
Each DIMM supports 256/512MB/1GB/2GB
DDR2
Max Memory Cap icity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported
IDE
Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mode 0~4,
Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mode 0~4,
SATA
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.
P4M900-M4
5
Ver 5.x Ver 6.x
LAN PHY
Realtek RTL 8201CL PHY
10 / 100 Mb/s auto negotiation
Half / Full dup lex capability
Realtek RTL 8201CL PHY
10 / 100 Mb/s auto negotiation
Half / Full dup lex capability
Sound
Codec
ALC883
7.1 channels audio out
High-Defin ition Audio support
VT1708B / ALC662 / ALC861VD
5.1 channels audio out
High-Defin ition Audio support
PCI Express x 16 slot x1 PCI Express x 16 slot x1
PCI Express x 1 slot x1 PCI Express x 1 slot x1
Slots
PCI slot x2 PCI slot x2
Floppy connector x1 Floppy connector x1
Printer Port connector x1 Printer Port connector x1
IDE Connector x2 IDE Connector x2
SATA Connector x2 SATA Connector x2
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
CD-in Connector x1 CD-in Connector x1
S/PDIF out connector x1 S/PDIF out connector x1
CPU Fan header x1 CPU Fan header x1
System Fan header x1 System Fan header x1
Clear CMOS header x1 Clear CMOS header x1
USB connector x2 USB connector x2
Power Connector (24pin) x1 Power Connector (24pin) x1
On Board
Connector
Power Connector (4pin) x1 Power Connector (4pin) x1
Back Panel
I/O
PS/2 Keyboard x1
PS/2 Mouse x1
Serial Port x1
VGA Port x1
LAN port x1
USB Port x4
Audio Jack x6
PS/2 Keyboard x1
PS/2 Mouse x1
Serial Port x1
VGA Port x1
LAN port x1
USB Port x4
Audio Jack x3
Board Size
190 mm (W) x 244 mm (L) 190 mm (W) x 244 mm (L)
OS
Support
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.
Motherboard Manual
6
1.4 REAR PANEL CONNECTORS (FOR VER 5.X)
PS/2
Mouse
PS/2
Keyboard
USBX2USBX2
LAN
COM1 VGA
Line In
Line Out
Mic In
Center
Rear
Side
AUDIO JACK
1.5 REAR PANEL CONNECTORS (FOR VER 6.X)
PS/ 2
Mouse
PS/2
Keyboard
USBX2USB X2
LAN
COM1 VGA
Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
Since the audio chip supports High Definition Audio Specification, the function of each audio
jack can be defined by software. The input / output function of each audio jack listed above
represents the default setting. However, when connecting external microphone to the audio
port, please use the Line In (blue) and Mic In (Pink) audio jack.
P4M900-M4
7
1.6 MOTHERBOARD LAYOUT
Super
I/O
DIMM1
DIMM2
FDD1
PCI-EX1_1
PCI-EX16
PC I1
PC I2
JPANEL1
JUSB2
JUSB3
JATXPWR1
JCFAN1
JATXPWR2
JSATA1
JSATA2
Codec
JCDIN1
JSFAN1
BAT1
VIA
VT8237A
P4M900
JAUDI OF1
JKBMS1
JUSB1
JUSBLAN1
JCO
M1
JVGA1
JAUDIO1
(for Ver 5.x)
JSPDIF_OUT1
IDE1
JCMOS1
LAN
IDE2
JUSBV2
JUSBV1
JP RNT 1
PU
CPU1
Socket 478
JAUDIO2
(for Ver 6.x)
BIOS
Note: represents the 1■st pin.
Motherboard Manual
8
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Pull the lever sideways away from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the white dot/cut edge. The white dot/cut edge should
point wards the lever pivot. The CPU will fit only in the correct
orientation.
Step 3: Hold the CPU down firmly, and then close the lever to complete the
installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN
power cable to the JCFAN1. This completes the installation.
P4M900-M4
9
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Header
Pin
Assignment
1 Ground
2 +12V
13
3 FAN RPM rate
sense
JSFAN1: System Fan Header
Pin
Assignment
1 Ground
2 +12V
13
3 FAN RPM rate
sense
Note:
The JCFAN1/JSFAN1 support 3-pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positive and should be connected to
pin#2, and the black wire is Ground and should be connected to GND.
Motherboard Manual
10
2.3 INSTALLING SYSTEM MEMORY
A. Memory Modules
DIMM1
DIMM2
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket
Location DDR Module Total Memory
Size
DIMM1 256MB/512MB/1GB/2GB
DIMM2 256MB/512MB/1GB/2GB
Max is 4GB.
P4M900-M4
11
2.4 CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.
34
33
1
2
IDE1/IDE2: Hard Disk Connectors
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. It has two
HDD connectors IDE1 (primary) and IDE2 (secondary).
The IDE connectors can connect a master and a slave drive, so you can
connect up to four hard disk drives. The first hard drive should always be
connected to IDE1.
IDE2IDE1
21
3940
Motherboard Manual
12
PCI-EX16: PCI-Express x16 Slot
- PCI-Express 1.0a compliant.
- Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, for an aggregate of 8GB/s totally.
PCI-EX1_1: PCI-Express x1 Slot
- PCI-Express 1.0a compliant.
- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
- 2X bandwidth over the traditional PCI architecture.
PCI-EX16
PCI-EX1_1
PCI1~PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
P4M900-M4
13
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened Pin closed Pin1-2 closed
3.2 DETAIL SETTINGS
JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to connect the PC case’s front
panel switch functions.
18
16
SLP
PWR_LED
On/Off
RST
HLED
SPK
++
+
9
-
-
Pin Assignment Function Pin Assignment Function
1 +5V 9 Sleep control
2 N/A 10 Ground Sleep button
3 N/A 11 N/A N/A
4 Speaker
Speaker
Connector
12 Power LED (+)
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
Hard drive
LED 14 Power LED (-)
Power LED
7 Ground 15 Power button
8 Reset control Reset button 16 Ground Power-on button
Motherboard Manual
14
ATX Power Source Connector: JATXPWR1
JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.
1
12
13
24
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Gro und
16 PS_ON 4 +5V
17 Ground 5 Gro und
18 Ground 6 +5V
19 Ground 7 Gro und
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
JATXPWR2: ATX Power Source Connector
By connecting this connector, it will provide +12V to CPU power circuit.
Pin
Assignment
1 +12V
2 +12V
3 Ground
1
23
4
4 Ground
P4M900-M4
15
JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
Pin
Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
19
210
JUSB2
JUSB3
10 NC
JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1.
JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby
voltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby voltage.
3
1
1
3
Pin 1-2 close
1
3
13
JUSBV1
JUSBV2
3
1
1
3
Pin 2-3 close
Note:
In order to support this function “Power-On system via USB device,” “JUSBV1/ JUSBV2”
jumper cap should be placed on Pin 2-3 individually.
Motherboard Manual
16
JAUDIOF1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. It will disable the output on back panel audio connectors.
Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in
10 Jack Sense
19
210
JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the variaty devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.
Pin
Assignment
1 Left Channel Input
2 Ground
3 Ground
14
4 Right Channel Input
JSPDIF_OUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
Assignment
1 +5V
2 SPDIF_OUT
13
3 Ground
P4M900-M4
17
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.
13
Pin 1-2 Close:
Normal Operation (default).
13
13
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
JSAT A1~JSATA2: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 2 channels SATA interface,
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.
Pin
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
147
JSATA1
JSATA2
14 7
7 Ground
Motherboard Manual
18
JPRNT1: Printer Port Connector
This header allows you to connector printer on the PC.
1
25
2
Pin Assignment Pin Assignment
1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy
9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key
P4M900-M4
19
CHAPTER 4: USEFUL HELP
4.1 DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
Motherboard Manual
20
4.2 AWARD BIOS BEEP CODE
Beep Sound Meaning
One long beep followed by two short
beeps
Video card not found or video card
memory bad
High-low siren sound CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second No DRAM detected or install
4.3 EXTRA INFORMATION
A. BIOS Update
After you fail to update BIOS or BIOS is invaded by virus, the
Boot-Block function will help to restore BIOS. If the following message
is shown after boot-up the system, it means the BIOS contents are
corrupted.
In this Case, please follow the procedure below to restore the BIOS:
1. Make a bootable floppy disk.
2. Download the Flash Utility “AWDFLASH.exe” from the Biostar
website: www.biostar.com.tw
3. Confirm motherboard model and download the respectively BIOS
from Biostar website.
4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.
5. Insert the bootable disk into floppy drive and press Enter.
6. System will boot-up to DOS prompt.
7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt.
(xxxx means BIOS name.)
8. System will update BIOS automatically and restart.
9. The BIOS has been recovered and will work properly.
P4M900-M4
21
B. CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
Motherboard Manual
22
4.4 TROUBLESHOOTING
Probable Solution
1. No power to the system at all
Power light don’t illuminate, fan
inside power supply does not turn
on.
2. Indicator light on keyboard does
not turn on.
1. Make sure power cable is
securely plugged in.
2. Replace cable.
3. Contact technical support.
System inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drive is spinning.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
System does not boot from hard disk
drive, can be booted from optical drive.
1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from optical drive.
Hard disk can be read and applications
can be used but booting from hard disk
is impossible.
1. Back up data and applications
files.
2. Reformat the hard drive.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Configuration” or “CMOS Failure.”
Review system’s equipment. Make sure
correct information is in setup.
Cannot boot system after installing
second hard drive.
1. Set master/slave jumpers
correctly.
2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
P4M900-M4
23
CHAPTER 5: WARPSPEEDER™
5.1 INTRODUCTION
[WarpSpeeder™], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage
Manager, and Hardware Monitor.
With the Overclock Manager, users can easily adjust the frequency they
prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core
voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset
information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,
memory, AGP and PCI along with the CPU speed are synchronically
shown on our main panel.
Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,
[WarpSpeeder™] technology assures the system stability by automatically
rebooting the computer and then restart to a speed that is either the
original system speed or a suitable one.
5.2 SYSTEM REQUIREMENT
OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP
DirectX: DirectX 8.1 or above. (The Windows XP operating system
includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)
Motherboard Manual
24
5.3 INSTALLATION
1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to
install.
2. When you see the following dialog in setup procedure, it means setup
is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox
is checked, the Tray Icon utility and [WarpSpeeder™] utility will be
automatically and immediately launched after you click “Finish”
button.
Usage:
The following figures are just only for reference, the screen printed in
this user manual will change according to your motherboard on hand.
P4M900-M4
25
5.4 WARPSPEEDER™
1. Tray Icon
Whenever the Tray Icon utility is launched, it will display a little tray
icon on the right side of Windows Taskbar.
This utility is responsible for conveniently invoking [WarpSpeeder™]
Utility. You can use the mouse by clicking the left button in order to
invoke [WarpSpeeder™] directly from the little tray icon or you can
right-click the little tray icon to pop up a popup menu as following
figure. The “Launch Utility” item in the popup menu has the same
function as mouse left-click on tray icon and “Exit” item will close
Tray Icon utility if selected.
Motherboard Manual
26
2. Main Panel
If you click the tray icon, [WarpSpeeder™] utility will be invoked.
Please refer to the following figure; the utility’s first window you will
see is Main Panel.
Main Panel contains features as follows:
a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock,
and PCI clock information.
b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for
invoking respective panels.
c. With a user-friendly Status Animation, it can represent 3 overclock
percentage stages:
Man walking→overclock percentage from 100% ~ 110 %
Panther running→overclock percentage from 110% ~ 120%
Car racing→overclock percentage from 120% ~ above
P4M900-M4
27
3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted
and the Voltage Panel will slide out to up as the following figure.
In this panel, you can decide to increase CPU core voltage and
Memory voltage or not. The default setting is “No”. If you want to get
the best performance of overclocking, we recommend you click the
option “Yes”.
Motherboard Manual
28
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be
highlighted and the Overclock Panel will slide out to left as the
following figure.
Overclock Panel contains the these features:
a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”:
provide user the ability to do real-time overclock adjustment.
Warning:
Manually overclock is potentially dangerous, especially when the
overclocking percentage is over 110 %. We strongly recommend you
verify every speed you overclock by click the Verify button. Or, you can
just click Auto overclock button and let [WarpSpeeder™] automatically
gets the best result for you.
b. “Recovery Dialog button”: Pop up the following dialog. Let user select
a restoring way if system need to do a fail-safe reboot.
P4M900-M4
29
c. “Auto-overclock button”: User can click this button and
[WarpSpeeder™] will set the best and stable performance and
frequency automatically. [WarpSpeeder™] utility will execute a
series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the
[WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
d. “Verify button”: User can click this button and [WarpSpeeder™]
will proceed a testing for current frequency. If the testing is ok,
then the current frequency will be saved into system registry. If
the testing fail, system will do a fail-safe rebooting. After reboot,
the [WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
Note:
Because the testing programs, invoked in Auto-overclock and Verify,
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or
newer runtime library is required. And please make sure your display
card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is
required for Direct3D rendering.
5. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will be
highlighted and the Hardware Monitor panel will slide out to left as
the following figure.
In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.
Motherboard Manual
30
6. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will slide out to up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the mainboard’s BIOS model and the Version number of
[WarpSpeeder™] utility.
Note:
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™] divide
these features to separate panels. If one chipset is not on board, the
correlative button in Main panel will be disabled, but will not interfere
other panels’ functions. This property can make [WarpSpeeder™]
utility more robust.
P4M900-M4
31
This page is intentionally left blank.
Motherboard Manual
32
APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
Ver 5.x Ver 6.x
CPU
Sockel 478
Intel Pentium 4 / Celeron D Prozessoren
mit bis zu 3,4 GHz (Unterstützt keine
W illamette CPUs)
Unterstützt Hyper-Threading Technology
*It is recommended to use processors with
95W power consumption.
Sockel 478
Intel Pentium 4 / Celeron D Prozessoren
mit bis zu 3,4 GHz (Unterstützt keine
W illamette CPUs)
Unterstützt Hyper-Threading Technology
*It is reco mmended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipsatz VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Grafik
Chrome9 HC 3D / 2D Graphics
Max. 256MB gemeinsam benutzter
Videospeicher
Chrome9 HC 3D / 2D Graphics
Max. 256MB gemeinsam benutzter
Videospeicher
Super E/A
ITE 8712F
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
Lüfterdrehzahl-Controller
"Smart Guardian"-Funktion von ITE
ITE 8712F
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
Lüfterdrehzahl-Controller
"Smart Guardian"-Funktion von ITE
Arbeitsspeic
her
DDR2 DIMM-Steckplätze x 2
Unterstützt DDR2 533 / 667
Jeder DIMM unterstützt
256/512MB/1GB/2GB DDR2.
Max. 4GB Arbeitsspeicher
Ein-Kanal DDR2 Speichermodul
registrierte DIMMs. ECC DIMMs werden
nicht unterstützt.
DDR2 DIMM-Steckplätze x 2
Unterstützt DDR2 533 / 667
Jeder DIMM unterstützt
256/512MB/1GB/2GB DDR2.
Max. 4GB Arbeitsspeicher
Ein-Kanal DDR2 Speichermodul
registrierte DIMMs. ECC DIMMs werden
nicht unterstützt.
IDE
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133 Bus
Master-Modus
Unterstützt PIO-Modus 0~4,
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133 Bus
Master-Modus
Unterstützt PIO-Modus 0~4,
SATA
Integrierter Ser ial ATA-Controller
Datentransferrate bis zu 1.5Gb/s
Konform mit der SATA-Spezifikation
Version 1.0.
Integrierter Ser ial ATA-Controller
Datentransferrate bis zu 1.5Gb/s
Konform mit der SATA-Spezifikation
Version 1.0.
P4M900-M4
33
Ver 5.x Ver 6.x
LAN PHY
Realtek RTL 8201CL PHY
10 / 100 Mb/s Auto-Negotiation
Halb-/ Vollduplex -Funktion
Realtek RTL 8201CL PHY
10 / 100 Mb/s Auto-Negotiation
Halb-/ Vollduplex -Funktion
Audio-Code
c
ALC883
Unterstützt High-Definition Audio
7.1-Kanal-Audioausgabe
VT1708B / ALC662 / ALC861VD
Unterstützt High-Definition Audio
5.1-Kanal-Audioausgabe
PCI-Steckplatz x2 PCI-Steckplatz x2
PCI Express x16 Steckplatz x1 PCI Express x16 Steckplatz x1
Steckplätze
PCI Express x 1-Steckplatz x1 PCI Express x 1-Steckplatz x1
Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1
Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1
IDE-Anschluss x2 IDE-Anschluss x2
SATA-Anschluss x2 SATA-Anschluss x2
Fronttafelanschluss x1 Fronttafelanschluss x1
Front-Audioanschluss x1 Front-Audioanschluss x1
CD-IN-Anschluss x1 CD-IN-Anschluss x1
S/PDIF-Ausgangsanschluss x1 S/PDIF-Ausgangsanschluss x1
CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1
System-Lüfter-Sockel x1 System-Lüfter-Sockel x1
"CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1
USB-Anschluss x2 USB-Anschluss x2
Stromanschluss (24-polig) x1 Stromans chluss (24-polig) x1
Onboard-An
schluss
Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1
Rückseiten-
E/A
PS/2-Tastatur x1
PS/2-Maus x1
Serieller Anschluss x1
VGA-Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4
Audioanschluss x6
PS/2-Tastatur x1
PS/2-Maus x1
Serieller Anschluss x1
VGA-Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4
Audioanschluss x3
Platinengrö
ße. 190 mm (B) X 244 mm (L) 190 mm (B) X 244 mm (L)
OS-Unterst
ützung
Windows 2K / XP / VISTA
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
entfernen.
Windows 2K / XP / VISTA
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
entfernen.
Motherboard Manual
34
FRENCH
Ver 5.x Ver 6.x
UC
Socket 478
Process eurs Intel Pentium 4 / Celeron D
jusqu'à 3,4 GHz (pas de prise en charge des
UC Willamette)
Prend en charge les technologies
Hyper-Threading
*It is recommended to use processors with
95W power consumption.
Socket 478
Process eurs Intel Pentium 4 / Celeron D
jusqu'à 3,4 GHz (pas de prise en charge des
UC Willamette)
Prend en charge les technologies
Hyper-Threading
*It is recommended to use processors with
95W power consumption.
Bus frontal
400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipset VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Graphique
s
Chrome9 HC 3D / 2D Graphics
Mémoire vidéo partagée maximale de 256
Mo
Chrome9 HC 3D / 2D Graphics
Mémoire vidéo partagée maximale de 256
Mo
Super E/S
ITE 8712F
Fournit la fonctionnalité de Super E/S
patrimoniales la p lus utilisée.
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Fonction "Gardien intelligent" de l' ITE
ITE 8712F
Fournit la fonctionnalité de Super E/S
patrimoniales la p lus utilisée.
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Fonction "Gardien intelligent" de l' ITE
Mémoire
principale
Fentes DDR2 DIMM x 2
Prend en charge la DDR2 533 / 667
Chaque DIMM prend en charge des DDR2
de 256 Mo /512 Mo / 1Go / 2 Go
Capacité mémoire max imale de 4 Go
Module de mémoire DDR2 à mode à simple
voie
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
charge
Fentes DDR2 DIMM x 2
Prend en charge la DDR2 533 / 667
Chaque DIMM prend en charge des DDR2
de 256 Mo /512 Mo / 1Go / 2 Go
Capacité mémoire max imale de 4 Go
Module de mémoire DDR2 à mode à simple
voie
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
charge
IDE
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 /
100 / 133
Prend en charge le mode PIO 0~4,
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 /
100 / 133
Prend en charge le mode PIO 0~4,
SATA
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécif ication SATA Version
1.0
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécif ication SATA Version
1.0
P4M900-M4
35
Ver 5.x Ver 6.x
LAN PHY
Realtek RTL 8201CL PHY
10 / 100 Mb/s négociation automatique
Half / Full dup lex capability
Realtek RTL 8201CL PHY
10 / 100 Mb/s négociation automatique
Half / Full dup lex capability
Codec
audio
ALC883
Prise en charge de l'audio haute définition
Sortie audio à 7.1 voies
VT1708B / ALC662 / ALC861VD
Prise en charge de l'audio haute définition
Sortie audio à 5.1 voies
Fente PCI x2 Fente PCI x2
Slot PCI Express x16 x1 Slot PCI Express x16 x1
Fentes
Slot PCI Express x 1 x1 Slot PCI Express x 1 x1
Connecteur de disquette x1 Connecteur de disquette x1
Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1
Connecteur IDE x2 Connecteur IDE x2
Connecteur SATA x2 Connecteur SATA x2
Connecteur du panneau avant x1 Connecteur du panneau avant x1
Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1
Connecteur d'entrée CD x1 Connecteur d'entrée CD x1
Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1
Embase de ventilateur UC x1 Embase de ventilateur UC x1
Embase de ventilateur système x1 Embase de ventilateur système x1
Embase d'effacement CMOS x1 Embase d'effacement CMOS x1
Connecteur USB x2 Connecteur USB x2
Connecteur d'alimentation x1
(24 broches)
Connecteur d'alimentation x1
(24 broches)
Connecteu
r
embarqué
Connecteur d'alimentation x1
(4 broches)
Connecteur d'alimentation x1
(4 broches)
E/S du
panneau
arrière
Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x6
Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x3
Dimension
s de la
carte
190 mm (l) X 244 mm (H) 190 mm (l) X 244 mm (H)
Support
SE
Windows 2K / XP / VISTA
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans
préavis.
Windows 2K / XP / VISTA
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans
préavis.
Motherboard Manual
36
ITALIAN
Ver 5.x Ver 6.x
CPU
Socket 478
Processore Intel Pentium 4 / Celeron D fino
a 3.4 GHz (Non supporta CPU Willamette)
Supporto di Hyper-Threading
*It is recommended to use processors with
95W power consumption.
Socket 478
Processore Intel Pentium 4 / Celeron D fino
a 3.4 GHz (Non supporta CPU Willamette)
Supporto di Hyper-Threading
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipset VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Grafica
Chrome9 HC 3D / 2D Graphics
La memoria vid eo condivisa massima è di
256MB
Chrome9 HC 3D / 2D Graphics
La memoria vid eo condivisa massima è di
256MB
Super I/O
ITE 8712F
Fornisce le funzionalità legacy Super I/O
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Controller velocità ventolina
Funzione "Smart Guardian" di ITE
ITE 8712F
Fornisce le funzionalità legacy Super I/O
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Controller velocità ventolina
Funzione "Smart Guardian" di ITE
Memoria
principale
Alloggi DIMM DDR2 x 2
Supporto di DDR2 533 / 667
Ciascun DIMM supporta DDR2 256MB
/512MB / 1GB / 2GB
Capacità massima della memoria 4GB
Modulo di memoria DDR2 a canale singolo
DIMM registrati e DIMM ECC non sono
supportati
Alloggi DIMM DDR2 x 2
Supporto di DDR2 533 / 667
Ciascun DIMM supporta DDR2 256MB
/512MB / 1GB / 2GB
Capacità massima della memoria 4GB
Modulo di memoria DDR2 a canale singolo
DIMM registrati e DIMM ECC non sono
supportati
IDE
Controller IDE integrato
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
Supporto modalità PIO Mode 0-4
Controller IDE integrato
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
Supporto modalità PIO Mode 0-4
SATA
Controller Ser ial ATA integrato
Velocità di trasferimento dei dati fino a 1.5
Gb/s.
Compatibile specifiche SATA Vers ione 1.0.
Controller Ser ial ATA integrato
Velocità di trasferimento dei dati fino a 1.5
Gb/s.
Compatibile specifiche SATA Vers ione 1.0.
LAN PHY
Realtek RTL 8201CL PHY
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
Realtek RTL 8201CL PHY
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
P4M900-M4
37
Ver 5.x Ver 6.x
Codec
audio
ALC883
Supporto audio High-Definition (HD)
Uscita audio 7.1 canali
VT1708B / ALC662 / ALC861VD
Supporto audio High-Definition (HD)
Uscita audio 5.1 canali
Alloggio PC I x2 Alloggio PC I x2
Alloggio PCI Express x16 x1 Alloggio PCI Express x16 x1
Alloggi
Alloggio PCI Express x1 x1 Alloggio PCI Express x1 x1
Connettore floppy x1 Connettore floppy x1
Connettore Porta stampante x1 Connettore Porta stampante x1
Connettore IDE x2 Connettore IDE x2
Connettore SATA x2 Connettore SATA x2
Connettore pannello frontale x1 Connettore pannello frontale x1
Connettore audio frontale x1 Connettore audio frontale x1
Connettore CD-in x1 Connettore CD-in x1
Connettore output SPDIF x1 Connettore output SPDIF x1
Collettore ventolina C PU x1 Collettore ventolina C PU x1
Collettore ventolina sistema x1 Collettore ventolina s istema x1
Collettore cance llaz ione CMOS x1 Collettore cancellaz ione CMOS x1
Connettore USB x2 Connettore USB x2
Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(24 pin)
Connettori
su scheda
Connettore alimentazione x1
(4 pin)
Connettore alimentazione x1
(4 pin)
I/O
pannello
posteriore
Tas tiera PS /2 x 1
Mouse PS/2 x1
Porta seriale x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Connettore audio x6
Tas tiera PS /2 x 1
Mouse PS/2 x1
Porta seriale x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Connettore audio x3
Dimension
i scheda 190 mm (larghezza) x 244 mm (altezza) 190 mm (larghezza) x 244 mm (altezza)
Sistemi
operativi
supportati
Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
Motherboard Manual
38
SPANISH
Ver 5.x Ver 6.x
CPU
Conector 478
Procesador Intel Pentium 4 / Celeron D
hasta 3,4 GHz (no soporta CPU Willamette)
Admite Hyper-Threading
*It is recommended to use processors with
95W power consumption.
Conector 478
Procesador Intel Pentium 4 / Celeron D
hasta 3,4 GHz (no soporta CPU Willamette)
Admite Hyper-Threading
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Conjunto
de chips
VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Gráficos
Chrome9 HC 3D / 2D Graphics
Memoria máxima de vídeo compartida de
256MB
Chrome9 HC 3D / 2D Graphics
Memoria máxima de vídeo compartida de
256MB
Súper E/S
ITE 8712F
Le ofrece las funcionalidades heredadas de
uso más común Súper E/S.
Interfaz de cuenta Low Pin
In iciativas de control de entorno,
Monitor hardware
Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE
ITE 8712F
Le ofrece las funcionalidades heredadas de
uso más común Súper E/S.
Interfaz de cuenta Low Pin
In iciativas de control de entorno,
Monitor hardware
Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE
Memoria
principal
Ranuras DIMM DDR2 x 2
Admite DDR2 de 533 / 667
Cada DIMM admite DDR de 256MB
/
512MB
/1GB / 2GB
Capacid ad máxima de memoria de 4GB
Módulo de memoria DDR2 de canal Sencillo
No admite DIMM registrados o DIMM
compatibles con ECC
Ranuras DIMM DDR2 x 2
Admite DDR2 de 533 / 667
Cada DIMM admite DDR de 256MB
/
512MB
/1GB / 2GB
Capacid ad máxima de memoria de 4GB
Módulo de memoria DDR2 de canal Sencillo
No admite DIMM registrados o DIMM
compatibles con ECC
IDE
Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
/ 133
Soporte los Modos PIO 0~4,
Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
/ 133
Soporte los Modos PIO 0~4,
SATA
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la vers ión SATA 1.0.
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la vers ión SATA 1.0.
Red Local
Realtek RTL 8201CL PHY
Negociación de 10 / 100 Mb/s
Funciones Half / Full dúplex
Realtek RTL 8201CL PHY
Negociación de 10 / 100 Mb/s
Funciones Half / Full dúplex
P4M900-M4
39
Ver 5.x Ver 6.x
Códecs de
sonido
ALC883
Soporte de sonido de Alta Definición
Salida de sonido de 7.1 canales
VT1708B / ALC662 / ALC861VD
Soporte de sonido de Alta Definición
Salida de sonido de 5.1 canales
Ranura PCI X2 Ranura PCI X2
Ranura PCI Express x16 X1 Ranura PCI Express x16 X1
Ranuras
Ranura PCI express x 1 X1 Ranura PCI express x 1 X1
Conector disco flexible X1 Conector disco flexible X1
Conector Puerto de impresora X1 Conector Puerto de impresora X1
Conector IDE X2 Conector IDE X2
Conector SATA X2 Conector SATA X2
Conector de panel frontal X1 Conector de panel frontal X1
Conector de sonido frontal X1 Conector de sonido frontal X1
Conector de entrada de CD X1 Conector de entrada de CD X1
Conector de salida S/PD IF X1 Conector de salida S/PD IF X1
Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1
Cabecera de ventilador de
sistema X1
Cabecera de ventilador de
sistema X1
Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1
Conector USB X2 Conector USB X2
Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(24 patillas)
Conectore
s en placa
Conector de alimentación X1
(4 patillas)
Conector de alimentación X1
(4 patillas)
Panel
trasero de
E/S
Tec lado PS/2 X1
Ratón PS/2 X1
Puerto serie X1
Puerto VGA X1
Puerto de red local X1
Puerto USB X4
Conector de sonido X6
Tec lado PS/2 X1
Ratón PS/2 X1
Puerto serie X1
Puerto VGA X1
Puerto de red local X1
Puerto USB X4
Conector de sonido X3
Tamaño d e
la placa 190mm. (A) X 244 Mm. (H) 190mm. (A) X 244 Mm. (H)
Soporte de
sistema
operativo
Windows 2K / XP / VISTA
Biostar se reserva el derecho de añadir o
retirar el soporte de cualquier SO con o sin
avis o previo.
Windows 2K / XP / VISTA
Biostar se reserva el derecho de añadir o
retirar el soporte de cualquier SO con o sin
avis o previo.
Motherboard Manual
40
PORTUGUESE
Ver 5.x Ver 6.x
CPU
Socket 478
Process ador Intel Pentium 4 / Celeron D até
3,4 GHz (não suporta a CPU Willamette)
Suporta as tecnologias Hyper-Threading
*It is recommended to use processors with
95W power consumption.
Socket 478
Process ador Intel Pentium 4 / Celeron D até
3,4 GHz (não suporta a CPU Willamette)
Suporta as tecnologias Hyper-Threading
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipset VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Placa
gráfica
Chrome9 HC 3D / 2D Graphics
Memória de vídeo máxima partilhada: 256
MB
Chrome9 HC 3D / 2D Graphics
Memória de vídeo máxima partilhada: 256
MB
Especificaç
ão Super
I/O
ITE 8712F
Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.
Interface LPC (Low Pin Count).
In iciativas para controlo do ambiente
Monitorização do hardware
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
ITE 8712F
Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.
Interface LPC (Low Pin Count).
In iciativas para controlo do ambiente
Monitorização do hardware
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Memória
principal
Ranhuras DIMM DDR2 x 2
Suporta módulos DDR2 533 / 667
Cada módulo DIMM suporta uma memória
DDR2 de 256MB /512 MB / 1 GB / 2GB
Capacidade máxima de memória: 4 GB
Módulo de memória DDR2 de canal simples
Os módulos DIMM reg istados e os DIMM
ECC não são suportados
Ranhuras DIMM DDR2 x 2
Suporta módulos DDR2 533 / 667
Cada módulo DIMM suporta uma memória
DDR2 de 256MB /512 MB / 1 GB / 2GB
Capacidade máxima de memória: 4 GB
Módulo de memória DDR2 de canal simples
Os módulos DIMM reg istados e os DIMM
ECC não são suportados
IDE
Controlador IDE integrado
Modo Bus master Ultra DMA 33 / 66 / 100 /
133
Suporta o modo PIO 0~4,
Controlador IDE integrado
Modo Bus master Ultra DMA 33 / 66 / 100 /
133
Suporta o modo PIO 0~4,
SATA
Controlador Serial ATA integrado
Velocidades de transmissão de dados até
1.5 Gb/s.
Compatibilidade com a especificação SATA
versão 1.0.
Controlador Serial ATA integrado
Velocidades de transmissão de dados até
1.5 Gb/s.
Compatibilidade com a especificação SATA
versão 1.0.
LAN PHY
Realtek RTL 8201CL PHY
Auto negociação de 10 / 100 MB/s
Capacidade semi/full-duplex
Realtek RTL 8201CL PHY
Auto negociação de 10 / 100 MB/s
Capacidade semi/full-duplex
P4M900-M4
41
Ver 5.x Ver 6.x
Codec de
som
ALC883
Suporta a especificação High-Definition
Audio
Saída de áud io de 7.1 canais
VT1708B / ALC662 / ALC861VD
Suporta a especificação High-Definition
Audio
Saída de áud io de 5.1 canais
Ranhura PCI x2 Ranhura PCI x2
Ranhura PCI Express x16 x1 Ranhura PCI Express x16 x1 Ranhuras
Ranhura PCI Express x 1 x1 Ranhura PCI Express x 1 x1
Conector da unidade de
disquetes x1
Conector da unidade de
disquetes x1
Conector da para impressora x1 Conector da para impressora x1
Conector IDE x2 Conector IDE x2
Conector SATA x2 Conector SATA x2
Conector do painel frontal x1 Conector do painel frontal x1
Conector de áudio frontal x1 Conector de áudio frontal x1
Conector para entrada de CDs x1 Conector para entrada de CDs x1
Conector de saída S/PDIF x1 Conector de saída S/PDIF x1
Conector da ventoinha da CPU x1 Conector da ventoinha da CPU x1
Conector da ventoinha do
sistema x1
Conector da ventoinha do
sistema x1
Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1
Conector USB x2 Conector USB x2
Conector de alimentação x1
(24 pinos)
Conector de alimentação x1
(24 pinos)
Conectore
s na placa
Conector de alimentação x1
(4 pinos)
Conector de alimentação x1
(4 pinos)
Entradas/
Saídas no
painel
traseiro
Tec lado PS/2 x 1
Rato PS/2 x1
Porta série x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Tomada de áudio x6
Tec lado PS/2 x 1
Rato PS/2 x1
Porta série x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Tomada de áudio x3
Tamanho
da placa 190 mm (L) X 244 mm (A) 190 mm (L) X 244 mm (A)
Sistemas
operativos
suportado
s
Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar
ou remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar
ou remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
Motherboard Manual
42
POLISH
Ver 5.x Ver 6.x
Procesor
Socket 478
Procesor Intel Pentium 4 / Celeron D do 3,4
GHz (brak obsługi procesorów Willamette)
Obsługa Hyper-Threading Technology
*It is recommended to use processors with
95W power consumption.
Socket 478
Procesor Intel Pentium 4 / Celeron D do 3,4
GHz (brak obsługi procesorów Willamette)
Obsługa Hyper-Threading Technology
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipset VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Grafika
Chrome9 HC 3D / 2D Graphics
Maks. wielkość współdz ielonej pamięci
video wynosi 256MB
Chrome9 HC 3D / 2D Graphics
Maks. wielkość współdz ielonej pamięci
video wynosi 256MB
Pamięć
główna
Gniazda DDR2 DIMM x 2
Obsługa DDR2 533 / 667
Każde gniazdo DIMM obsługuje moduły
256MB /512MB / 1GB / 2GB DDR2
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
pojedynczego kanału
Brak obsługi Registered DIMM oraz ECC
DIMM
Gniazda DDR2 DIMM x 2
Obsługa DDR2 533 / 667
Każde gniazdo DIMM obsługuje moduły
256MB /512MB / 1GB / 2GB DDR2
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
pojedynczego kanału
Brak obsługi Registered DIMM oraz ECC
DIMM
Super I/O
ITE 8712F
Zapewnia najbardziej powszechne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Monitor H/W
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guardian"
ITE 8712F
Zapewnia najbardziej powszechne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Monitor H/W
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guardian"
IDE
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
obsługa PIO tryb 0~4,
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
obsługa PIO tryb 0~4,
SATA
Zintegrowany kontroler Serial ATA
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji
1.0.
Zintegrowany kontroler Serial ATA
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji
1.0.
P4M900-M4
43
Ver 5.x Ver 6.x
LAN PHY
Realtek RTL 8201CL PHY
10 / 100 Mb/s z automatyczną negocjacją
szybkości
Działanie w trybie połowicznego / pełnego
dupleksu
Realtek RTL 8201CL PHY
10 / 100 Mb/s z automatyczną negocjacją
szybkości
Działanie w trybie połowicznego / pełnego
dupleksu
Kodek
dźwiękowy
ALC883
Obsługa High-Definition Audio
7.1 kanałowe wyjście audio
VT1708B / ALC662 / ALC861VD
Obsługa High-Definition Audio
5.1 kanałowe wyjście audio
Gniazdo PCI x2 Gniazdo PCI x2
Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1 Gniazda
Gniazdo PCI Express x 1 x1 Gniazdo PCI Express x 1 x1
Złącze napędu dyskietek x1 Złącze napędu dyskietek x1
Złącze Port drukarki x1 Złącze Port drukarki x1
Złącze IDE x2 Złącze IDE x2
Złącze SATA x2 Złącze SATA x2
Złącze panela przedniego x1 Złącze panela przedniego x1
Przednie złącze audio x1 Przednie złącze audio x1
Złącze wejścia CD x1 Złącze wejścia CD x1
Złącze wyjścia S/PDIF x1 Złącze wyjścia S/PDIF x1
Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora
systemowego x1
Złącze główkowe wentylatora
systemowego x1
Złącze główkowe kasowania
CMOS x1
Złącze główkowe kasowania
CMOS x1
Złącze USB x2 Złącze USB x2
Złącze zasilania (24 pinowe) x1 Złącze zasilania (24 pinowe) x1
Złącza
wbudowan
e
Złącze zasilania (4 pinowe) x1 Złącze zasilania (4 p inowe) x1
Back Panel
I/O
Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregowy x1
Port VGA x1
Port LAN x1
Port USB x4
Gniazdo audio x6
Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregowy x1
Port VGA x1
Port LAN x1
Port USB x4
Gniazdo audio x3
Wymiary
płyty 190 mm (S) X 244 mm (W) 190 mm (S) X 244 mm (W)
Obsluga
systemu
operacyjn
ego
Windows 2K / XP / VISTA
Biostar zastrzega sobie prawo dodawania
lub odwoływania obsługi dowolnego
systemu operacyjnego bez powiadomienia.
Windows 2K / XP / VISTA
Biostar zastrzega sobie prawo dodawania
lub odwoływania obsługi dowolnego
systemu operacyjnego bez powiadomienia.
Motherboard Manual
44
RUSSIAN
Ver 5.x Ver 6.x
CPU
(централь
ный
процессор
)
Гнездо 478
Процессор Intel Pentium 4 / Celeron D до
3.4 ГГц ( не поддерживает центральные
процессоры Willamette)
Поддержка технологий Hyper-Threading
Technology
*It is recommended to use processors with
95W power consumption.
Гнездо 478
Процессор Intel Pentium 4 / Celeron D до
3.4 ГГц ( не поддерживает центральные
процессоры Willamette)
Поддержка технологий Hyper-Threading
Technology
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 МГц 400 / 533 / 800 МГц
Набор
микросхе
м
VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Графика
Chrome9 HC 3D / 2D Graphics
Максимальная совместно используемая
видео память составляет 256 МБ
Chrome9 HC 3D / 2D Graphics
Максимальная совместно используемая
видео память составляет 256 МБ
Основная
память
Слоты DDR2 DIMM x 2
Поддержка DDR2 533 / 667
Каждый модуль DIMM поддерживает
256MB / 512МБ / 1ГБ / 2ГБ DDR2
Максимальная ёмкость памяти 4 ГБ
Модуль памяти с одноканальным
режимом DDR2
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM
Слоты DDR2 DIMM x 2
Поддержка DDR2 533 / 667
Каждый модуль DIMM поддерживает
256MB / 512МБ / 1ГБ / 2ГБ DDR2
Максимальная ёмкость памяти 4 ГБ
Модуль памяти с одноканальным
режимом DDR2
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM
Super I/O
ITE 8712F
Обеспечивает наиболее используемые
действующие фун кц ио нал ьные
возможности Super I/O.
Интерфейс с низким количеством
выводов
Инициативы по охране окружающей
среды,
Аппаратный монитор
Регулятор скорости
Функц ия ITE "Smart Guardian"
(Интеллектуальная защита)
ITE 8712F
Обеспечивает наиболее используемые
действующие фун кц ио нал ьные
возможности Super I/O.
Интерфейс с низким количеством
выводов
Инициативы по охране окружающей
среды,
Аппаратный монитор
Регулятор скорости
Функц ия ITE "Smart Guardian"
(Интеллектуальная защита)
IDE
Встроенное устройство управления
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 /
100 / 133
Поддержка режима PIO 0~4,
Встроенное устройство управления
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 /
100 / 133
Поддержка режима PIO 0~4,
SATA
Встроенное последовательное
устройство управления ATA
скорость передачи данных до 1.5
гигабит/с.
Соответствие спецификации SATA версия
1.0.
Встроенное последовательное
устройство управления ATA
скорость передачи данных до 1.5
гигабит/с.
Соответствие спецификации SATA версия
1.0.
P4M900-M4
45
Ver 5.x Ver 6.x
Локальна
я сеть
Realtek RTL 8201CL PHY
Автоматическое согласование 10 / 100
Мб/с
Частичная / полная дуплексная
способность
Realtek RTL 8201CL PHY
Автоматическое согласование 10 / 100
Мб/с
Частичная / полная дуплексная
способность
Звуковой
кодек
ALC883
Звуковая поддержка High-Definition
7.1канальный звуковой выход
VT1708B / ALC662 / ALC861VD
Звуковая поддержка High-Definition
5.1канальный звуковой выход
Слот PCI x2 Слот PCI x2
Слот PCI Express x16 x1 Слот PCI Express x16 x1
Слоты
Слот PCI Express x 1 x1 Слот PCI Express x 1 x1
Разъём НГМД x1 Разъём НГМД x1
Разъём Порт подключения
принтера x1
Разъём Порт подключения
принтера x1
Разъём IDE x2 Разъём IDE x2
Разъём SATA x2 Разъём SATA x2
Разъём на лицевой панели x1 Разъём на лицевой панели x1
Входной звуковой разъём x1 Входной звуковой разъём x1
Разъём ввода для CD x1 Разъём ввода для CD x1
Разъём вывода для S/PDIF x1 Разъ ём вывода для S/PDIF x1
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы x1
Контактирующее приспособление
вентилятора системы x1
Открытое контактирующее
приспособление CMOS x1
Открытое контактирующее
приспособление CMOS x1
USB-разъём x2 USB-разъём x2
Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1
Встроенн
ый разъём
Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1
Задняя
панель
средств
ввода-выв
ода
Клавиатура PS/2 x1
Мышь PS/2 x1
Последовательный порт x1
Порт VGA x1
Порт LAN x1
USB-порт x4
Гнездо для подключения
наушников x6
Клавиатура PS/2 x1
Мышь PS/2 x1
Последовательный порт x1
Порт VGA x1
Порт LAN x1
USB-порт x4
Гнездо для подключения
наушников x3
Размер
панели 190 мм (Ш) X 244 мм (В) 190 мм (Ш) X 244 мм (В)
Поддержк
а OS
Windows 2K / XP / VISTA
Biostar сохраняет за собой право
добавлять или удалять средства
обеспечения для OS с или без
предварительного уведомления.
Windows 2K / XP / VISTA
Biostar сохраняет за собой право
добавлять или удалять средства
обеспечения для OS с или без
предварительного уведомления.
Motherboard Manual
46
ARABIC
Ver 5.x Ver 6.x
ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا
ﺔﻳﺰآﺮﻤﻟا
ﺲﺒﻘﻡ478
تﺎﺠﻟﺎﻌﻡIntel Pentiu m 4 / Celeron D ﺏ ددﺮﺘ ﻳ ﻞﺼ
ﻰﻟإ4.3 ﺰﺕﺮه ﺎﺠﻴﺝ
ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﻢﻋﺪﺕ ﻻWillamette
تﺎﻴﻨﻘﺕ ﻢﻋﺪﺕHyper-Threading Technology
*It is recommended to use processors with
95W power consumption.
ﺲﺒﻘﻡ478
تﺎﺠﻟﺎﻌﻡIntel Pentiu m 4 / Celeron D ﺏ ددﺮﺘ ﻳ ﻞﺼ
ﻰﻟإ4.3 ﺰﺕﺮه ﺎﺠﻴﺝ
ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﻢﻋﺪﺕ ﻻWillamette
تﺎﻴﻨﻘﺕ ﻢﻋﺪﺕHyper-Threading Technology
*It is recommended to use processors with
95W power consumption.
ﻞﻗﺎﻨﻟا ﻲﻡﺎﻡﻷا
ﻲﺒﻥﺎﺠﻟا
ددﺮﺕ 400 / 533 / 800 ﺰﺕﺮه ﺎﺠﻴﻡ
ددﺮﺕ 400 / 533 / 800 ﺰﺕﺮه ﺎﺠﻴﻡ
ﺔﻋﻮﻤﺠﻡ ﺢﺋاﺮﺸﻟا
VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
تﺎﻡﻮﺳﺮﻟا ﺔﻗﺎﻄﺏ
Chrome9 HC 3D / 2D Graphics
ﺔآﺮﺘﺸﻤﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ256ﺖﻳﺎﺏ ﺎﺠﻴﻡ
Chrome9 HC 3D / 2D Graphics
ﺔآﺮﺘﺸﻤﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ256ﺖﻳﺎﺏ ﺎﺠﻴﻡ
ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا
ﺔﺤﺘﻓDDR2 DIMM دﺪﻋ2
ﻢﻋﺪﺕ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR2 تﺎﻌﺳ 533 / 667 ﺎﺠﻴﻡ ﺖﻳﺎﺏ
ﻢﻋﺪﺕ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋﺪﺕ ةﺮآاذ ﻦﻡ عﻮﻥ DDR2 ﺔﻌﺳ
256 ﺎﺠﻴﻡ ﺖﻳﺎﺏ /512 ﺎﺠﻴﻡ ﺖﻳﺎﺏ و1 ﺎﺠﻴﺝ ﺖﻳﺎﺏ / 2 ﺎﺠﻴﺝ
ﺖﻳﺎﺏ
ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 4 ﺎﺠﻴﺝ ﺖﻳﺎﺏ
ةﺪﺣو ةﺮآاذ DDR2 ﺔﻳدﺎﺣأ ةﺎﻨﻘﻟا
ﻻ ﻢﻋﺪﺕ ﻖﺋﺎﻗر ةﺮآاﺬﻟا DIMM ﺔﻠﺠﺴﻤﻟا ﻚﻠﺕو ﻲﺘﻟا ﻻ ﻖﻓاﻮﺘﺕ ﻊﻡ
ECC
ﺔﺤﺘﻓDDR2 DIMM دﺪﻋ2
ﻢﻋﺪﺕ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR2 تﺎﻌﺳ 533 / 667 ﺎﺠﻴﻡ ﺖﻳﺎﺏ
ﻢﻋﺪﺕ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋﺪﺕ ةﺮآاذ ﻦﻡ عﻮﻥ DDR2 ﺔﻌﺳ
256 ﺎﺠﻴﻡ ﺖﻳﺎﺏ /512 ﺎﺠﻴﻡ ﺖﻳﺎﺏ و1 ﺎﺠﻴﺝ ﺖﻳﺎﺏ / 2 ﺎﺠﻴﺝ
ﺖﻳﺎﺏ
ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 4 ﺎﺠﻴﺝ ﺖﻳﺎﺏ
ةﺪﺣو ةﺮآاذ DDR2 ﺔﻳدﺎﺣأ ةﺎﻨﻘﻟا
ﻻ ﻢﻋﺪﺕ ﻖﺋﺎﻗر ةﺮآاﺬﻟا DIMM ﺔﻠﺠﺴﻤﻟا ﻚﻠﺕو ﻲﺘﻟا ﻻ اﻮﺘﺕﻖﻓ ﻊﻡ
ECC
Super I/O
ITE 8712F
ﺮﻓﻮﺕ ﺔﻔﻴﻇو Super I/O ﺮﺜآﻷا ًﺎ ﻡ ا ﺪ ﺨ ﺘ ﺳ ا.
ﺕﻢﻋﺪ ﺔﻴﻨﻘﺕ Low Pin Count Interface
ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:
ﺐﻗاﺮﻡ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺝﻷا
ﺐﻗاﺮﻡ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا
ﺔﻔﻴﻇو"Smart Guardian" ﻦﻡ ITE
ITE 8712F
ﺮﻓﻮﺕ ﺔﻔﻴﻇو Super I/O ﺮﺜآﻷا ًﺎ ﻡ ا ﺪ ﺨ ﺘ ﺳ ا.
ﺕﻢﻋﺪ ﺔﻴﻨﻘﺕ Low Pin Count Interface
ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:
ﺐﻗاﺮﻡ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺝﻷا
ﺐﻗاﺮﻡ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا
ﺔﻔﻴﻇو"Smart Guardian" ﻦﻡ ITE
ﺬﻔﻨﻡ IDE
ﻢﻜﺤﺘﻡ IDE ﻞﻡﺎﻜ ﺘﻡ
ﺔﻴﻨﻘﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133
ﻊﺿو ﻲﺴﻴﺋر
ﻊﺿو ﻢﻋدPIO Mode 0~4
ﻢﻜﺤﺘﻡ IDE ﻞﻡﺎﻜ ﺘﻡ
ﺔﻴﻨﻘﺘﺏ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100 / 133
ﻊﺿو ﻲﺴﻴﺋر
ﻊﺿو ﻢﻋدPIO Mode 0~4
SATA
ﻢﻜﺤﺘﻡ Serial ATA ﻞﻡﺎﻜﺘﻡ
ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼﺕ ﻰﻟإ1.5 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.
ﺔﻘﺏﺎﻄﻡ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 1.0.
ﻢﻜﺤﺘﻡ Serial ATA ﻞﻡﺎﻜﺘﻡ
ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺏ ﻞﺼﺕ ﻰﻟإ1.5 ﺖﺏﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.
ﺏﺎﻄﻡﺔﻘ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 1.0.
P4M900-M4
47
Ver 5.x Ver 6.x
ﺔﻜﺒﺵ ﺔﻴﻠﺥاد
Realtek RTL 8201CL PHY
ﻲﺋﺎﻘﻠﺕ ضوﺎﻔﺕ10/100 ﺖﻳﺎﺏ ﺎﺠﻴﻡ /ﺔﻴﻥﺎﺙ
ﻞﻡﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻡإ/ﻲﻔ ﺼﻨﻟا
Realtek RTL 8201CL PHY
ﻲﺋﺎﻘﻠﺕ ضوﺎﻔﺕ10/100 ﺖﻳﺎﺏ ﺎﺠﻴﻡ /ﺔﻴﻥﺎﺙ
ﻞﻡﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻡإ/ﻲﻔ ﺼﻨﻟا
ﻚﻳدﻮآ تﻮﺼﻟا
ALC883
ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕ
7.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ
VT1708B / ALC662 / ALC861VD
ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕ
5.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ
ﺔﺤﺘﻓPCI دﺪﻋ2 ﺔﺤﺘﻓPCI دﺪﻋ2
ﺔﺤﺘﻓx16 PCI Express دﺪﻋ1 ﺔﺤﺘﻓx16 PCI Express دﺪﻋ1 تﺎﺤﺘﻔﻟا
ﺔﺤﺘﻓPCI Express x 1 دﺪﻋ1 ﺔﺤﺘﻓPCI Express x 1 دﺪﻋ1
ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1
ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻌﺏﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1
ﺬﻔﻨﻡIDE دﺪﻋ2 ﺬﻔﻨﻡIDE دﺪﻋ2
ﺬﻔﻨﻡSATA دﺪﻋ2 ﺬﻔﻨﻡSATA دﺪﻋ2
ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡﺔﻴﻡﺎﻡ دﺪﻋ1
ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1
ﺬﻔﻨﻡCD-IN دﺪﻋ1 ﺬﻔﻨﻡCD-IN دﺪﻋ1
جﺮﺥ ﺬﻔﻨﻡS/PDIF دﺪﻋ1 جﺮﺥ ﺬﻔﻨﻡS/PDIF دﺪﻋ1
ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1 ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1
مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1 ومﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹ دﺪﻋ1
ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1 ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1
ﺬﻔﻨﻡUSB دﺪﻋ2 ﺬﻔﻨﻡUSB دﺪﻋ2
ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)24سﻮﺏد( دﺪﻋ1
ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺳ
ﺔﺣﻮﻠﻟا
ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)4ﺲﻴﺏﺎﺏد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)4ﺲﻴﺏﺎﺏد( دﺪﻋ1
ﺬﻓﺎﻨﻡ ﻞﺥد/جﺮﺥ
ﻟاﺔﺣﻮﻠ ﺔﻴﻔﻠﺨﻟا
ﺢﻴﺕﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1
سوﺎﻡ PS/2 دﺪﻋ1
ﻲﻠﺴﻠﺴﺕ ﺬﻔﻨﻡ دﺪﻋ1
ﺬﻔﻨﻡVGA دﺪﻋ1
ﺔﻴﻠﺤﻡ لﺎﺼﺕا ﺔﻜﺒﺵ ﺬﻔﻨﻡ دﺪﻋ1
ﺬﻓﺎﻨﻡUSB دﺪﻋ4
تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ6
ﺢﻴﺕﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1
سوﺎﻡ PS/2 دﺪﻋ1
ﻲﻠﺴﻠﺴﺕ ﺬﻔﻨﻡ دﺪﻋ1
ﺬﻔﻨﻡVGA دﺪﻋ1
ﺔﻴﻠﺤﻡ لﺎﺼﺕا ﺔﻜﺒﺵ ﺬﻔﻨﻡ دﺪﻋ1
ﺬﻓﺎﻨﻡUSB دﺪﻋ4
تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ3
ﻢﺠﺣ ﺔﺣﻮﻠﻟا
190 ﻢﻡ)ضﺮﻋ (X 244 ﻢﻡ)عﺎﻔﺕرا( 190 ﻢﻡ)ضﺮﻋ (X 244 ﻢﻡ)عﺎﻔﺕرا(
ﻢﻋد ﺔﻤﻈﻥأ
ﻞﻴﻐﺸﺘﻟا
Windows 2K / XP / VISTA
ﻆﻔﺘﺤﺕ Biostar ﺎﻬﻘﺤﺏ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ
ﻞﻴﻐﺸﺕ رﺎﻄﺥﺈﺏ وأ نوﺪﺏ رﺎﻄﺥإ.
Windows 2K / XP / VISTA
ﻆﻔﺘﺤﺕ Biostar ﺎﻬﻘﺤﺏ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ
ﻞﻴﻐﺸﺕ رﺎﻄﺥﺈﺏ وأ نوﺪﺏ رﺎﻄﺥإ.
Motherboard Manual
48
JAPANESE
Ver 5.x Ver 6.x
CPU
Socket 478
Intel Pent ium 4 / Celeron D processor up to
3.4 GHz (Willamette CPUはサポートしませ
ん)
Hyper-Threading Technology をサポートしま
す
*It is recommended to use processors with
95W power consumption.
Socket 478
Intel Pent ium 4 / Celeron D processor up to
3.4 GHz (Willamette CPUはサポートしませ
ん)
Hyper-Threading Technology をサポートしま
す
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
チップセッ
ト
VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
グラフィッ
クス
Chrome9 HC 3D / 2D Graphics
最大の共有ビデオメモリは256MBです
Chrome9 HC 3D / 2D Graphics
最大の共有ビデオメモリは256MBです
メインメモ
リ
DDR2 DIMMスロット x 2
DDR2 533 / 667をサポート
各DIMMは 256/512MB/1GB/2GB DDR2をサ
ポート
最大メモリ容量4GB
シングル チャンネルモードDDR2メモリモジュ
ール
登録済みDIMMとECC DIMMはサポートされま
せん
DDR2 DIMMスロット x 2
DDR2 533 / 667をサポート
各DIMMは 256/512MB/1GB/2GB DDR2をサ
ポート
最大メモリ容量4GB
シングル チャンネルモードDDR2メモリモジュ
ール
登録済みDIMMとECC DIMMはサポートされま
せん
Super I/O
ITE 8712F
もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
H/Wモニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能
ITE 8712F
もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
H/Wモニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能
IDE
統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド
PIO Mode 0~4のサポート、
統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド
PIO Mode 0~4のサポート、
SATA
統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度
SATAバージョン1.0仕様に準拠。
統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度
SATAバージョン1.0仕様に準拠。
P4M900-M4
49
Ver 5.x Ver 6.x
LAN PHY
Realtek RTL 8201CL PHY
10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能
Realtek RTL 8201CL PHY
10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能
サウンド
Codec
ALC883
ハイデフィニションオーディオのサポート
7.1 チャンネルオーディオアウト
VT1708B / ALC662 / ALC861VD
ハイデフィニションオーディオのサポート
5.1 チャンネルオーディオアウト
PCIスロット x2 PCIスロット x2
PCI Express x16スロット x1 PCI Express x16スロット x1 スロット
PCI Express x 1スロット x1 PCI Express x 1スロット x1
フロッピーコネクタ x1 フロッピーコネクタ x1
プリンタポートコネクタ x1 プリンタポートコネクタ x1
IDEコネクタ x2 IDEコネクタ x2
SATAコネクタ x2 SATAコネクタ x2
フロントパネルコネクタ x1 フロントパネルコネクタ x1
フロントオーディオコネクタ x1 フロントオーディオコネクタ x1
CDインコネクタ x1 CDインコネクタ x1
S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1
CPUファンヘッダ x1 CPUファンヘッダ x1
システムファンヘッダ x1 システムファンヘッダ x1
CMOSクリアヘッダ x1 CMOSクリアヘッダ x1
USBコネクタ x2 USBコネクタ x2
電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1
オンボード
コネクタ
電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1
背面パネル
I/O
PS/2キーボード x1
PS/2マウス x1
シリアルポート x1
VGAポート x1
LANポート x1
USBポート x4
オーディオジャック x6
PS/2キーボード x1
PS/2マウス x1
シリアルポート x1
VGAポート x1
LANポート x1
USBポート x4
オーディオジャック x3
ボードサイ
ズ 190 mm (幅) X 244 mm (高さ) 190 mm (幅) X 244 mm (高さ)
OSサポー
ト
Windows 2K / XP / VISTA
Biostarは事前のサポートなしにOSサポートを
追加または削除する権利を留保します。
Windows 2K / XP / VISTA
Biostarは事前のサポートなしにOSサポートを
追加または削除する権利を留保します。
2009/02/17

Navigation menu