Biostar P4M900 Micro 775 Owners Manual P4M90 M7_0226C

2014-07-31

: Biostar Biostar-P4M900-Micro-775-Owners-Manual biostar-p4m900-micro-775-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 93

Download
Open PDF In Browser	View PDF

P4M900 Micro 775 Setup Manual

FCC Information and Copyright
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses and can radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.

The vendor makes no representations or warranties with respec t to the
contents here and s pecially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make c hanges to the c ontents here without obligation to
notify any party beforehand.
D uplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .

Table of Contents
Chapter 1: INTRODUCTION........................................ 3
1.1
1.2
1.3
1.4
1.5
1.6
1.7

Before You Start................................................................... 3
Package Checklist................................................................ 3
Motherboard FeaturesS......................................................... 4
Rear Panel Connectors (for Ver 5.x)....................................... 6
Rear Panel Connectors (for Ver 6.x )....................................... 6
Motherboard Layout (for Ver 5.x ).......................................... 7
Motherboard Layout (for Ver 6.x ).......................................... 8

Chapter 2: Hardware Installation.............................. 9
2.1
2.2
2.3

Installing Central Processing Unit (CPU) ................................ 9
Fan Headers........................................................................11
Installing System Memory.....................................................12

2.4

Connectors and Slots ............................................................13

Chapter 3: Headers & Jumpers Setup .....................15
3.1
3.2

How to Setup Jumpers..........................................................15
Detail Settings.....................................................................15

Chapter 4: USEFUL HELP ..........................................21
4.1
4.2
4.3
4.4

Driver Installation Note .......................................................21
Award BIOS Beep Code........................................................22
Extra Information................................................................22
Troubleshooting...................................................................24

Chapter 5: WarpSpeeder™ .......................................25
5.1
5.2
5.3
5.4

Introduction........................................................................25
System Requirement............................................................25
Installation .........................................................................26
WarpSpeeder™....................................................................27

Appendencies: SPEC In Other Language ................34
German................................................................................................34
France..................................................................................................36
Italian..................................................................................................38
Spanish ................................................................................................40
Portuguese...........................................................................................42
Polish...................................................................................................44
Russian ................................................................................................46
Arabic..................................................................................................48
Japanese ..............................................................................................50

P4M900 Micro 775

CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU ST ART
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
Prepare a dry and stable work ing environment with
sufficie nt lighting.
Always disconne ct the compute r from powe r outle t
be fore ope ration.
Before you take the mothe rboard out from anti-static
bag, ground yourse lf prope rly by touching any safe ly
grounde d appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the compone nts on mothe rboard or the
rear side of the board unless ne cessary. Hold the board
on the edge , do not try to be nd or flex the board.
Do not leave any unfastene d small parts inside the
case afte r installation. Loose parts will cause short
circuits which may damage the equipment.

1.2

Keep the compute r from dange rous a rea, such as hea t
source , humid air and wate r.

PACKAGE CHECKLIST
HDD Cable X 1
Use r’s Manual X 1
Fully Se tup Drive r C D X 1
Rear I/O Panel for ATX Case X 1
FDD Cable X 1 (optional)
Se rial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF Cable X 1 (optional)
Se rial ATA Powe r Cable X 1 (optional)

Motherboard Manual

1.3

MOT HERBOARD FEAT URES S
Ver 5.x

CPU

Ver 6.x

LGA 775

Intel Core2Duo/ Pe ntium 4 / Pentium D /

Celeron D pr ocessor up to 3.8 GHz

Supports Hyper Thre ading/ Ex ecute Disable Supports Hyper Thre ading/ Ex ecute Disable
Bit/ Enhanced Intel S peedStep®/ Intel

Bit/ Enhanced Intel S peedStep®/ Intel

Extende d Memor y 64 technolo gy

*It is recommende d to use processors with *It is recommende d to use processors with

FSB
Chipset

Graphic

Super I/O

95W power co nsumption.

533 / 800 / 1066 MHz

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Max Share d Vide o Memory is 256 MB

ITE 8712F

Provides the most commonly used legacy

Super I/O functionality.

Low Pin C ount Interface

Enviro nment Co ntrol initiatives,

H/W Monitor

Fan Spee d Co ntroller

ITE's "Smart Guardia n" function

DIMM Slots x 2

Supports DDR2 533 / 667

Each DIMM supports 256/ 512MB/1GB/ 2GB Each DIMM supports 256/ 512MB/1GB/ 2GB
Main
Memory

IDE

SATA

DDR2

Max Memory C apicity 4GB

Single Channel Mode DDR2 memory

module

Registered DIMM and ECC DIMM is not

supported

Integrated I DE Controller

Ultra DMA 33~133 B us Master Mode

supports PIO Mo de 0~4,

Integrated Seri al ATA Controller

Data transfer rates up to 1.5 Gb/s.

SATA Version 1.0 specification complia nt.

P4M900 Micro 775
Ver 5.x

LAN PHY

Sound
Codec

Slots

On Board
Connector

Ver 6.x

Realtek RTL 8201CL

10 / 100 Mb/s auto negotiation

Half / Full duplex capability

ALC888

ALC861VD

7.1 cha nnels a udio o ut

5.1 cha nnels a udio o ut

High- Defi nition Audio s upport

PCI Expr ess x 16 slot

PCI Expr ess x 1 slot

PCI slot

Floppy connector

IDE Co nnector

SATA Connector

Front Pa nel Co nnector

Front Audi o Co nnector

CD-in Co nnector

S/PDIF o ut connector

CPU Fan hea der

System Fan hea der

Clear CMOS header

USB connector

Power Connector ( 24pi n)

Power Connector ( 4pin)

PS/2 Keyboard

PS/2 Mo use

Serial Port

Back Panel Printer Port

Printer Port

I/O

VGA Port

LAN port

USB Port

Audio J ack

VGA Port

Board Size 190 mm (W) x 244 mm (L)
OS
Support

Windows 2000 / XP / VISTA

190 mm (W) x 244 mm (L)
Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remo ve Biostar Reserves the right to add or remove
support for any OS with or witho ut notice. support for any OS with or witho ut notice.

Motherboard Manual

1.4

REAR PANEL CONNECT ORS ( FOR V ER 5.X)

PS/2
Mou se

LAN

Printer Port

PS/2
Ke yboard

COM1

VGA

Center

1.5
PS/2
Mouse

USBX2

AU DIO JAC K

USBX2

Li ne In

Rear

Li ne Out

Side

Mic In

REAR PANEL CONNECT ORS ( FOR V ER 6.X)
LAN

Printer Port

Li ne In/
Surround
Line Out
Mic In 1/
Bass/ Center

PS/2
Keyboard

COM1

VGA

USBX2

Since the audio c hip s upports High Definiti on Audio Specific ation, the func tion of eac h audi o
jack c an be defined by software. T he input / output function of each audio jac k listed above
represents the default s etti ng. However, when c onnecti ng exter nal microphone to the audio
port, pleas e us e the Line In (blue) and Mic In (Pink) audio j ac k.

P4M900 Micro 775

1.6

MOT HERBOARD LAYOUT ( FOR V ER 5.X)
JCFAN1

J KBMS 1

LGA775
COM1
JCOM1

CPU1
JPRNT1

DDR2_A1

JVGA1

JATXPWR2

P4M900

JRJ45USB1

IDE2

JUSBV1

IDE1

JUSB2

DDR 2_B1

JATXPWR1

LAN
J AUDIO1

PCI-EX16

Super
I/O

PCI-EX1_1

BAT1
JSATA2
JUSB2

VIA
VT8237A

PCI1
BIOS

JCDIN1

JSATA1
JUSB3

PCI2
Codec

JAUDIO2

JUSBV2
JCMOS1

JSPDIF_OUT1

FDD1

JSFAN1
JPANEL1

Not e: ■ represe nts the 1st pin.
7

Motherboard Manual

1.7

MOT HERBOARD LAYOUT ( FOR V ER 6.X)
JCFAN1

J KBMS 1

LGA775
COM1
JCOM1

CPU1
JPRNT1

DDR2_A1

JVGA1

JATXPWR2

P4M900

JRJ45USB1

IDE2

JUSBV1

IDE1

JUSB2

DDR 2_B1

JATXPWR1

LAN
JA UDIO1
PCI-EX16

Super
I/O

PCI-EX1_1

BAT1
JSATA2
JUSB2

VIA
VT8237A

PCI1

BIOS

JCDIN1

JSATA1
JUSB3

PCI2
Codec

JAUDIO2

JUSBV2
JCMOS1

JSPDIF_OUT1
FDD1

JSFAN1
JPANEL1

Not e: ■ represe nts the 1st pin.
8

P4M900 Micro 775

CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)

Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.

Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.

P4M900 Micro 775

2.2

FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Heade r

JCFAN1

Pin
1
2
3
4

Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control

JSFAN1: System Fan He ader

Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense

JSFAN1

Note:
The JSFAN1 support 3-pi n head connector. When connecti ng with wires onto connectors,
please note that the red wire is the positi ve and should be connected to pin#2, and the
black wire is Ground and should be connected to GND.

Motherboard Manual

2.3

INST ALLING SYST EM MEMORY

DDR2_A1
DDR2_B1

A. Memory Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

B. Memory Capacity

DIMM Socket
Location
DDR2_A1

256MB/512MB/1GB/2GB

DDR2_B1

256MB/512MB/1GB/2GB

DDR Module

Total Memory
Size
Max is 4GB.

P4M900 Micro 775

2.4

CONNECT ORS AND SLOT S

FDD1: Floppy Disk Conne ctor
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cables.

IDE1/IDE2: Hard Disk Conne ctors
The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality. It has two
HDD connectors IDE1 (primary) and IDE2 (secondary).
The IDE connectors can connect a master and a slav e driv e, so you can
connect up to four hard disk drives. The f irst hard drive should always be
connected to IDE1.

IDE1

IDE2

Motherboard Manual

PCI-EX16: PCI-Express x16 Slot
-

PCI-Express 1.0a compliant.

Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, f or an aggregate of 8GB/s totally.

PCI-EX1_1: PCI-Express x1 slots
-

PCI-Express 1.0a compliant.

Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth ov er the traditional PCI architecture.

PC I-EX 16

PC I-EX 1_1

PCI1~PCI2: Pe riphe ral Component Interconne ct Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

P4M900 Micro 775

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW T O SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DET AIL SETT INGS

JPANEL1: Front Panel Heade r
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to connect the PC case’s f ront
panel switch functions.

SLP

PWR_LED
On/Off
++ -

9
1

+ SPK

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Functio n
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

16
8

RST
HLED

Assignment
Sleep control
Ground
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Functio n
Sleep button
N/A
Power LED

Power-on button

Motherboard Manual

ATX Power Source Conne ctor: JATXPWR1
JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.
12

Assignment

13
14
15
16
17
18
19
20
21
22
23
24

+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

1
2
3
4
5
6
7
8
9
10
11
12

+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

JATXPWR2: ATX Powe r Source Conne ctor
By connecting this connector, it will provide +12V to CPU power circuit.

Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

P4M900 Micro 775

JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.

JUSB2

JUSB3

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports
Pin 1-2 Close:

JUSBV1: +5V for USB ports at JRJ45USB1.
JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3).
Pin 2-3 Close:

JUSBV1: USB ports at JRJ45USB1 are powered by +5V standby v oltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby v oltage.
3
1

Pin 1-2 close

JUSBV 1
3
1

3
1

Pin 2-3 close

JUSBV 2

Note:
In order to support this function “Power-On system vi a USB device,” “JUSBV1/ JUSBV2”
jumper cap should be placed on Pin 2-3 indi viduall y.

Motherboard Manual

JAUDIO 2: Front Panel Audio Heade r
This header allows user to connect the front audio output cable with the PC f ront
panel. It will disable the output on back panel audio connectors.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

JCDIN1: CD-RO M Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Pin
1
2
3
4

Assignment
Left Channel Input
Ground
Ground
Right Channel Input

P4M900 Micro 775

JCMO S1: Cle ar CMOS Heade r
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
1

Pin 1-2 Close:
Normal Operation (default).

3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Proce dures:
1.
2.
3.
4.
5.
6.

Remov e AC power line.
Set the jumper to “Pin 2-3 close”.
Wait f or f ive seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset y our desired password or clear the CMOS data.

JSATA1~JSATA2: Se rial ATA Connectors
The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.

JSATA2

Pin
1
2
3
4
5
6
7

Assignment
Ground
T X+
T XGround
RXRX+
Ground

JSATA1

Motherboard Manual

JSPDIF_O UT1: Digital Audio-out Conne ctor
This connector allows user to connect the PCI bracket SPDIF output header.

Pin
1
2
3

Assignment
+5V
SPDIF_OUT
Ground

P4M900 Micro 775

CHAPTER 4: USEFUL HELP
4.1 DRIVER INST ALLAT ION NOT E
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html

Motherboard Manual

4.2

AWARD BIOS BEEP CODE
Beep Sound

Meaning

One long beep followed by two short
beeps
High-low siren sound

Video card not found or v ideo card
memory bad
CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second
No DRAM detected or install

4.3

EXT RA INFORMAT ION

A. BIOS Update
After you fail to update BIOS or BIOS is invaded by virus, the
Boot-Block function will help to restore BIOS. If the following message
is shown after boot-up the system, it means the BIOS contents are
corrupted.

In this Case, please follow the procedure below to restore the BIOS:
1. Make a bootable floppy disk.
2. Download the Flash Utility “AWDFLASH.exe” from the Biostar
website: www.biostar.com.tw
3. Confirm motherboard model and download the respectively BIOS
from Biostar website.
4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.
5. Insert the bootable disk into floppy drive and press Enter.
6. System will boot-up to DOS prompt.
7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt.
(xxxx means BIOS name.)
8. System will update BIOS automatically and restart.
9. The BIOS has been recovered and will work properly.

P4M900 Micro 775

B. CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

Motherboard Manual

4.4

TROUBLESHOOT ING
Probable

Solution

1.
Make sure power cable is
No power to the system at all
securely plugged in.
Power light don’t illuminate, f an
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard driv e is spinning.
module snaps into place.
System does not boot from hard disk 1.
Check cable running from disk to
driv e, can be booted f rom optical driv e.
disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots f rom optical driv e. 1.
Back up data and applications
Hard disk can be read and applications
f iles.
can be used but booting from hard disk 2.
Ref ormat the hard driv e.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.”
correct inf ormation is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard driv e.
correctly.
2.
Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
1.

P4M900 Micro 775

CHAPTER 5: WARPSPEEDER™

5.1

INT RODUCT ION

[WarpSpeeder™], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage
Manager, and Hardware Monitor.
With the Overclock Manager, users can easily adjust the frequency they
prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core
voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset
information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,
memory, AGP and PCI along with the CPU speed are synchronically
shown on our main panel.
Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,
[WarpSpeeder™] technology assures the system stability by automatically
rebooting the computer and then restart to a speed that is either the
original system speed or a suitable one.

5.2

SYST EM REQUIREMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP
DirectX: DirectX 8.1 or above. (The Windows XP operating system
includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)

Motherboard Manual

5.3

INST ALLAT ION

1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to
install.

2. When you see the following dialog in setup procedure, it means setup
is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox
is checked, the Tray Icon utility and [WarpSpeeder™] utility will be
automatically and immediately launched after you click “Finish”
button.

Usage :
The following figures are just only for reference, the screen printed in
this user manual will change according to your motherboard on hand.
26

P4M900 Micro 775

5.4

WARPSPEEDER™

1. Tray Icon:
Whenever the Tray Icon utility is launched, it will display a little tray
icon on the right side of Windows Taskbar.

This utility is responsible for conveniently invoking [WarpSpeeder™]
Utility. You can use the mouse by clicking the left button in order to
invoke [WarpSpeeder™] directly from the little tray icon or you can
right-click the little tray icon to pop up a popup menu as following
figure. The “Launch Utility” item in the popup menu has the same
function as mouse left-click on tray icon and “Exit” item will close
Tray Icon utility if selected.

Motherboard Manual

2. Main Panel
If you click the tray icon, [WarpSpeeder™] utility will be invoked.
Please refer to the following figure; the utility’s first window you will
see is Main Panel.
Main Panel contains fe ature s as follows:
a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock,
and PCI clock information.
b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for
invoking respective panels.
c. With a user-friendly Status Animation, it can represent 3 overclock
percentage stages:
Man walking→overclock percentage from 100% ~ 110 %
Panther running→overclock percentage from 110% ~ 120%
Car racing→overclock percentage from 120% ~ above

P4M900 Micro 775

3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted
and the Voltage Panel will slide out to up as the following figure.
In this panel, you can decide to increase CPU core voltage and
Memory voltage or not. The default setting is “No”. If you want to get
the best performance of overclocking, we recommend you click the
option “Yes”.

Motherboard Manual

4. Overclock Panel
Click the Overclock button in Main Panel, the button will be
highlighted and the Overclock Panel will slide out to left as the
following figure.

O ve rclock Panel contains the these features:
a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”:
provide user the ability to do real-time overclock adjustment.
Warning:

Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. We strongly recommend you
v erify ev ery speed you overclock by click the Verify button. Or, you can
just click Auto ov erclock button and let [WarpSpeeder™] automatically
gets the best result f or y ou.

b. “Recovery Dialog button”: Pop up the following dialog. Let user select
a restoring way if system need to do a fail-safe reboot.

P4M900 Micro 775

“Auto-overclock button”: User can click this button and
[WarpSpeeder™] will set the best and stable performance and
frequency automatically. [WarpSpeeder™] utility will execute a
series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the
[WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
“Verify button”: User can click this button and [WarpSpeeder™]
will proceed a testing for current frequency. If the testing is ok,
then the current frequency will be saved into system registry. If
the testing fail, system will do a fail-safe rebooting. After reboot,
the [WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
Note:

Because the testing programs, invoked in Auto-overclock and Verify,
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or
newer runtime library is required. And please make sure y our display
card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is
required f or Direct3D rendering.

5. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will be
highlighted and the Hardware Monitor panel will slide out to left as
the following figure.
In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.

Motherboard Manual

6. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will slide out to up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the mainboard’s BIOS model and the Version number of
[WarpSpeeder™] utility.

Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™] divide
these features to separate panels. If one chipset is not on board, the
correlative button in Main panel will be disabled, but will not interfere
other panels’ functions. This property can make [WarpSpeeder™]
utility more robust.
32

P4M900 Micro 775

This page is intentionally left blank

Motherboard Manual

APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
Ver 5.x

CPU

Ver 6.x

LGA 775

Intel Core2Duo/ Pe ntium 4 / Pentium D /

Celeron D Pr ozessoren mit bis zu 3,8 GHz

Unterstützt Hyper-Thre ading / Execute

Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® /
Intel Architecture-64 / Extended Memory

Intel Architecture-64 / Extended Memory

64 Technology

*It is recommended to use processors with *It is recommended to use processors with
95W power co nsumption.
FSB
Chipsatz

Grafik

95W power co nsumption.

533 / 800 / 1066 MHz

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Max. 256MB gemei nsam be nutzter

Videospeicher

ITE 8712F

Bietet die häufi g verwe ndete n alte n Super Bietet die häufi g verwe ndete n alte n Super

Super E/A

E/A-Funktio nen.

Low Pin C ount-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdre hzahl-Co ntroller

"Smart Guar dian" -Funktion v on ITE

DDR2 DIMM-Steckplätze x 2

Unterstützt DDR2 533 / 667

Jeder DIMM unterstützt

Arbeitsspeic 256/512MB/1GB/2GB DDR2.

256/512MB/1GB/2GB DDR2.

her

Max. 4GB Ar beitsspeicher

Ein-Kanal DDR2 S peichermodul

registrierte DIMMs. ECC DIMMs werde n

nicht unterstützt.

Integrierter IDE-Co ntroller

Ultra DMA 33 / 66 / 100 / 133Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

Integrierter Serial ATA-Controller

Datentransferr ate bis zu 1.5Gb/s

Konform mit der SATA-Spezifikation

Version 1.0.

IDE

SATA

P4M900 Micro 775
Ver 5.x
LAN PHY

Audio-Code
c

Ver 6.x

Realtek RTL 8201CL

10 / 100 Mb/s A uto-Negotiation

Halb-/ Vollduplex- Funktion

ALC888

ALC861VD

Unterstützt High- Definitio n Audio

7.1-Kanal-Audioausgabe

5.1-Kanal-Audioausgabe

PCI-Steckplatz

Steckplätze PCI Expr ess x16 Steckplatz

PCI Expr ess x16 Steckplatz

PCI Expr ess x 1-Steckplatz

Onboard-An
schluss

Diskettenlaufwerk anschluss

IDE-Anschluss

SATA-Anschluss

Fronttafela nschluss

Front-Audioa nschluss

CD-IN-Anschluss

S/PDIF-Ausgangsanschluss

CPU-Lüfter-Sockel

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

Stromanschluss (24- polig)

Stromanschluss (4-poli g)

PS/2-Tastatur

PS/2-Maus

Serieller Anschluss

Rückseiten- Druckeranschluss

Druckeranschluss

E/A

VGA-Anschluss

LAN-Anschluss

USB-Anschluss

Audioanschluss

Platinengr ö
ße.

OS-Unterst
ützung

190 mm (B) X 244 mm (L)

Windows 2K / XP / VISTA

Biostar behält sich das Recht v or, ohne

Ankündigung die Unterstützung für ei n

Betriebssystem hinzuzufügen oder zu

entfernen.

Motherboard Manual

FRANCE
Ver 5.x

Ver 6.x

LGA 775

Processeurs Intel Core 2Duo/ P entium 4 /

Pentium D / Celeron D jusqu'à 3,8 GHz

Prend en charge les technologies

Hyper -Thre ading / d'ex écution de bit de

désactivation / I ntel Spe edStep®

optimisée/ d'architecture I ntel 64 / de

mémoire étendue 64

*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
Bus frontal 533 / 800 / 1066 MHz
Chipset
Graphi que
s

95W power co nsumption.
533 / 800 / 1066 MHz

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Mémoire vidé o partagée maximale de 256 Mémoire vidé o partagée maximale de 256
Mo

ITE 8712F

Fournit la fo nctionnalité de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broc hes

Initiatives de co ntrôle e nvironnementales,

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction " Gardie n i ntelligent" de l'ITE

Fentes DDR 2 DIMM x 2

Prend en charge la DDR 2 533 / 667

Chaque DIMM prend e n charge des DDR2

de 256 Mo /512 M o / 1Go / 2 Go

Mémoire

Capacité mémoire maximale de 4 Go

principale

Module de mémoire DDR2 à mode à simple Module de mémoire DDR2 à mode à simple

Super E/S

IDE

SATA

voie

Les DIMM à r egistres et DIMM sans code

correcteurs d'erreurs so nt pas prises en

charge

Contrôleur IDE intégr é

Mode pri ncipale de Bus Ultra DMA 33 / 66 / Mode pri ncipale de Bus Ultra DMA 33 / 66 /
100 / 133

100 / 133

Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré :

Taux de transfert jusqu'à 1.5 Go/s.

Conforme à la spécification SATA Version

1.0

P4M900 Micro 775
Ver 5.x
LAN PHY

Codec
audio

Fentes

Realtek RTL 8201CL

10 / 100 Mb/s négociation a utomatique

Half / Full duplex capability

ALC888

ALC861VD

Prise en c harge de l'audio haute dé finition

Sortie audio à 7.1 voies

Sortie audio à 5.1 voies

Fente PCI

Slot PCI Ex press x16

Slot PCI Ex press x 1

Connecteur de disquette

Connecteur IDE

Connecteur SATA

Connecteur du pa nne au avant

Connecteur Audio du panneau ava nt x1

Connecteur d'entré e CD

Connecteur de sortie S/PDIF

Embase de ve ntilateur UC

Connecteu Connecteur de sortie S/PDIF
r

Ver 6.x

Realtek RTL 8201CL

Embase de ve ntilateur UC

embarqué Embase de ve ntilateur système x1
Embase d'e ffacement CMOS

Embase d'e ffacement CMOS

Connecteur USB

Connecteur d'alimentatio n

(24 broches)
Connecteur d'alimentatio n

(24 broches)
x1

(4 br oches)

E/S du
panneau
arrière

Embase de ve ntilateur système x1

Connecteur d'alimentatio n

(4 br oches)

Clavier PS/2

Souris PS/2

x1
x1

Port série

Port d'imprimante

Port VGA

Port LAN

Port USB

Fiche audio

Dimension
s de la

190 mm (l) X 244 mm (H)

carte
Windows 2K / XP / VISTA

Windows 2K / XP / VISTA

Support

Biostar se réserve le droit d'ajo uter o u de

supprimer le support de SE avec o u sa ns

préavis.

Motherboard Manual

IT ALIAN
Ver 5.x

CPU

Ver 6.x

LGA 775

Processore Intel Core 2Duo/ Pentium 4 /

Pentium D / Celeron D fino a 3.8 GHz

Supporto di Hyper -Threadi ng / Execute

Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® /
Architettura Intel 64 / Tecnologi a Extende d Architettura Intel 64 / Tecnologi a Extende d
Memory 64

Memory 64

*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.

95W power co nsumption.

533 / 800 / 1066 MHz

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

La memoria vi deo co ndivisa massima è di

256MB

ITE 8712F

Fornisce le funzio nalità legacy Super I/O

usate più comunemente.

Interfaccia LPC (L ow Pin Count)

Funzioni di co ntrollo dell’ambiente:

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart Guardi an" di I TE

Alloggi DIMM DDR 2 x 2

Supporto di DDR2 533 / 667

Ciascun DIMM supporta DDR 2 256MB

Memoria

/512MB / 1GB / 2GB

principale

Capacità massima della memori a 4GB

FSB
Chipset

Grafica

Super I/O

Modulo di memoria DDR2 a canale singolo Modulo di memoria DDR2 a canale singolo

IDE

SATA

DIMM registrati e DIMM ECC no n sono

supportati

Controller IDE i ntegrato

Modalità Bus Master Ultra DMA 33 / 66 /

100

/ 133

Supporto modalità PIO Mode 0- 4

Controller Serial ATA inte grato

Velocità di trasferimento dei dati fi no a 1.5 Velocità di trasferimento dei dati fi no a 1.5
Gb/s.

Gb/s.

Compatibile specifiche SATA Versione 1.0.

P4M900 Micro 775
Ver 5.x
LAN PHY

Codec
audio

Alloggi

Connettori
su scheda

Ver 6.x

Realtek RTL 8201CL

Negoziazione automatica 10 / 100 Mb/s

Capacità Half / Full Duplex

ALC888

ALC861VD

Supporto audio High-Definition (HD)

Uscita audio 7.1 ca nali

Uscita audio 5.1 canali

Alloggio PCI

Alloggio PCI Ex press x16

Alloggio PCI Ex press x1

Connettore flo ppy

Connettore IDE

Connettore SATA

Connettore pa nnello fro ntale

Connettore audio frontale

Connettore CD-in

Connettore output SPDIF

Collettore ventolina CPU

Collettore ventolina sistema

Collettore cancellazione CMOS

Connettore USB

Connettore alimentazione

(24 pin)
Connettore alimentazione

(24 pin)
x1

(4 pi n)

I/O
pannello
posteriore

Dimension
i scheda
Sistemi
operativi
supportati

Connettore alimentazione

(4 pi n)

Tastiera PS/2

Mouse PS/2

Porta seriale

Porta stampante

Porta VGA

Porta LAN

Porta USB

Connettore audio

190 mm (larghezza) x 244 mm (altezza)

Windows 2K / XP / VISTA

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo se nza pre avviso.

Motherboard Manual

SPANISH
Ver 5.x

CPU

Ver 6.x

LGA 775

Procesador I ntel Core 2Duo/ P entium 4 /

Pentium D / Celeron D hasta 3,8 GHz

Admite Hyper -Threadi ng / Bit de

deshabilitación de ejecució n / Intel

SpeedStep® Me jora do / Intel

Architecture-64 / Tecnologí a Extended

Memory 64

*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.

95W power co nsumption.

FSB

533 / 800 / 1066 MHz

Conjunto

VIA P4M900

de chips

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Memoria máxima de ví deo compartida de

256MB

ITE 8712F

Gráficos

Le ofrece las funcionalidades here dadas de Le ofrece las funcionalidades here dadas de

Súper E/S

uso más común Súper E/S.

Interfaz de cue nta Low Pin

Iniciativas de control de entor no,

Monitor hardware

Controlador de velocida d de ve ntilador

Función "Guardia intelige nte" de I TE

Ranuras DIMM DDR 2 x 2

Admite DDR2 de 533 / 667

Cada DIMM admite DDR de 256MB / 512MB Cada DIMM admite DDR de 256MB / 512MB
Memoria

/1GB / 2GB

principal

Capacidad máxima de memoria de 4GB

Módulo de memoria DDR 2 de canal Se ncillo Módulo de memoria DDR 2 de canal Se ncillo

IDE

SATA

No a dmite DIMM re gistrados o DIMM

compatibles con ECC

Controlador IDE inte grado

Modo bus maestro Ultra DMA 33 / 66 / 100 Modo bus maestro Ultra DMA 33 / 66 / 100
/ 133

/ 133

Soporte los Mo dos PIO 0~4,

Controlador ATA Serie Integra do

Tasas de transfere ncia de hasta 1.5 Gb/s.

Compatible con la versión SATA 1.0.

P4M900 Micro 775
Ver 5.x
Red Local

Códecs de
sonido

Ranuras

Ver 6.x

Realtek RTL 8201CL

Negociación de 10 / 100 Mb/s

Funciones Half / F ull dúplex

ALC888

ALC861VD

Soporte de soni do de Alta Defi nición

Salida de sonido de 7.1 canales

Salida de sonido de 5.1 canales

Ranura PCI

Ranura PCI Ex press x16

Ranura PCI ex press x 1

Conector disco flexible

Conector IDE

Conector SATA

Conector de pa nel fro ntal

Conector de sonido frontal

Conector de entra da de C D

Conector de salida S/PDIF

Cabecera de ve ntilador de C PU

Conectore Cabecera de ve ntilador de C PU

s en placa Cabecera de ve ntilador de

Cabecera de ve ntilador de

sistema

Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

(24 patillas)
Conector de alimentación

(24 patillas)

(4 patillas)

Panel
trasero de
E/S

Tamaño de
la placa
Soporte de
sistema
operativo

(4 patillas)

Teclado PS/2

Ratón PS/2

X1
X1

Puerto serie

Puerto de impr esora

Puerto VGA

Puerto de re d local

Puerto USB

Conector de sonido

190mm. (A) X 244 Mm. (H)

Windows 2K / XP / VISTA

Biostar se reserva el derecho de a ñadir o

retirar el soporte de cualquier SO con o sin retirar el soporte de cualquier SO con o sin
aviso previo.

aviso previo.

Motherboard Manual

PORT UGUESE
Ver 5.x

CPU

Ver 6.x

LGA 775

Processador Intel Core2Duo / Pe ntium 4 /

Pentium D / Celeron D até 3,8 GHz

Suporta as tecnologias Hyper -Threa ding /

Execute Disable Bit / Enha nced I ntel

SpeedStep® / Intel Arquitecture -64 /

Extende d Memor y 64

*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
FSB
Chipset
Placa
gráfica

95W power co nsumption.

533 / 800 / 1066 MHz

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Memória de víde o máxima partilha da: 256 Memória de víde o máxima partilha da: 256
MB

ITE 8712F

Proporciona as funcionalida des mais

utilizadas em termos da especificação

Especificaç Super I/O.

Super I/O.

ão Super

Interface LPC (Low Pi n Co unt).

I/O

Iniciativas para control o do am biente

Monitorização do hardware

Controlador da velocida de da v entoinha

Função "Smart Guardia n" da I TE

Ranhuras DIMM DDR2 x 2

Suporta mó dulos DDR2 533 / 667

Cada mó dulo DIMM suporta uma memória Cada mó dulo DIMM suporta uma memória
Memória

DDR2 de 256MB / 512 MB / 1 GB / 2GB

principal

Capacidade máxima de memória : 4 GB

Módulo de memória DDR2 de canal simples Módulo de memória DDR2 de canal simples

IDE

SATA

Os módulos DIMM r egistados e os DIMM

ECC nã o são suporta dos

Controlador IDE inte grado

Modo Bus master Ultra DMA 33 / 66 / 100 / Modo Bus master Ultra DMA 33 / 66 / 100 /
133

133

Suporta o modo PIO 0~4,

Controlador Serial ATA integra do

Velocidades de transmissão de dados até

1.5 Gb/s.

Compatibilidade com a especificação SATA Compatibilidade com a especificação SATA
versão 1.0.

versão 1.0.

P4M900 Micro 775
Ver 5.x
LAN PHY

Ver 6.x

Realtek RTL 8201CL

Auto ne gociação de 10 / 100 MB/s

Capacidade semi/full- duplex

ALC888

ALC861VD

Codec de

Suporta a especificação High-De finition

som

Audio

Audio
Saída de á udio de 5.1 ca nais

Saída de á udio de 7.1 ca nais
Ranhuras

Ranhura PCI

Ranhura PCI Express x 16

Ranhura PCI Express x 1

Conector da unida de de

Conectore
s na placa

Conector da unida de de

disquetes

Conector IDE

Conector SATA

Conector do pai nel fro ntal

Conector de áudio fro ntal

Conector para e ntrada de C Ds

Conector de saída S/PDIF

Conector da ve ntoinha da CPU

Conector da ve ntoinha do
sistema

Conector da ve ntoinha do
x1

Conector para limpeza do CMOS x1

sistema

Conector para limpeza do CMOS x1

Conector USB

Conector de alimentação

(24 pinos)
Conector de alimentação

(24 pinos)

(4 pi nos)

Teclado PS/2

Rato PS/2

Entradas/

Porta série

Saídas no

Porta para impressora

painel

Porta VGA

traseiro

Porta LAN

Porta USB

Tomada de áudio

Tamanho
da pl aca
Sistemas

190 mm (L) X 244 mm (A)
Windows 2K / XP / VISTA

operativos A Biostar reserva-se o direito de adicionar

190 mm (L) X 244 mm (A)
Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar

suportado ou remov er suporte para qualquer sistema ou remov er suporte para qualquer sistema
s

operativo com ou sem aviso prévio.

Motherboard Manual

POLISH
Ver 5.x

Ver 6.x

LGA 775

Procesor Intel Cor e2Duo/ Penti um 4 /

Pentium D / Celeron D do 3,8 GHz

Obsługa Hyper-Threa ding / Exec ute Disable Obsługa Hyper-Threa ding / Exec ute Disable
Procesor

Bit / Enhance d I ntel Spee dStep® / Intel

Architecture-64 / Exte nde d Memory 64

Technol ogy

*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
FSB
Chipset

Grafika

Pamięć
główna

Super I/O

IDE

SATA

95W power co nsumption.

533 / 800 / 1066 MHz

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Maks. wielkość współdzielonej pamięci

video wy nosi 256MB

Gniazda DDR 2 DIMM x 2

Obsługa DDR2 533 / 667

Każde gniazdo DIMM obsługuje mo duły

256MB /512MB / 1GB / 2GB DDR2

Maks. wielkość pamięci 4GB

Moduł pamięci DDR2 z trybem

poje dynczego kanału

Brak obsługi Registered DIMM or az ECC

DIMM

ITE 8712F

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs L ow Pin Count

Funkcje kontroli warunków prac y,

Monitor H/W

Kontroler prę dkości wentylatora

Funkcja ITE "Smart Guar dian"

Zintegrowany kontroler IDE

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus

Master

obsługa PIO tryb 0~4,

Zintegrowany kontroler Serial ATA

Transfer da nych do 1.5 Gb/s.

Zgodność ze specyfikacją SATA w wersji

1.0.

P4M900 Micro 775
Ver 5.x

Ver 6.x

Realtek RTL 8201CL
LAN PHY

Kodek
dźwiękowy

Gniazda

Złącza

Realtek RTL 8201CL

10 / 100 Mb/s z automatyczną negocjacją

szybkości

Działanie w trybie połowicznego / pełnego

dupleksu

ALC888

ALC861VD

Obsługa Hi gh- Definitio n Audio

7.1 ka nałowe wy jście audio

5.1 ka nałowe wy jście audio

Gniazdo PCI

Gniazdo PCI Express x 16

Gniazdo PCI Express x 1

Złącze napędu dyskietek

Złącze IDE

Złącze SATA

Złącze panela przedniego

Przednie złącze a udio

Złącze wejścia CD

Złącze wyjścia S/PDIF

wbudowan Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora procesora x1
e

Złącze główkowe wentylatora
systemowego

Złącze główkowe wentylatora
x1

Złącze główkowe kasowani a

systemowego

Złącze główkowe kasowani a

CMOS

Złącze USB

Złącze zasilania (24 pi nowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Port szeregowy

Back Panel Port druk arki

Port druk arki

I/O

Port VGA

Port LAN

Port USB

Gniazdo audio

Port szeregowy

Wymiary

190 mm (S) X 244 mm (W)

Obsluga

Windows 2K / XP / VISTA

systemu

Biostar zastrzega sobie prawo do dawania

operacyjn

lub o dwoływania obsługi dowolne go

ego

systemu operacyjnego bez powiadomienia. systemu operacyjnego bez powiadomienia.

płyty

Motherboard Manual

RUSSIAN
Ver 5.x
LGA 775
Процессор Intel Core 2Duo/ Pe ntium 4 /
CPU
Pentium D / Celeron D до 3.8 ГГц
(центра ль Подде ржка техноло гий Hy per-Thre ading /
ный
Execute Disable Bit / Enha nced I ntel
процессор SpeedStep® / Intel Architecture-64 /

Ver 6.x
LGA 775
Процессор Intel Core 2Duo/ Pe ntium 4 /
Pentium D / Celeron D до 3.8 ГГц
Подде ржка техноло гий Hy per-Thre ading /

)

Execute Disable Bit / Enha nced I ntel
SpeedStep® / Intel Architecture-64 /
Extende d Memor y 64 Technology
Extende d Memor y 64 Technology
*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
95W power co nsumption.

FSB

533 / 800 / 1066 МГц

Набор
микросхе
м

VIA P4M900
VIA VT8237A

Графика

Chrome9 HC 3D / 2D Graphics
Максимальная совмес тно используемая
видео память составляет 256 МБ

Слоты DDR2 DIMM x 2
Подде ржка DDR2 533 / 667
Каждый модуль DIMM по ддерж ивае т

256MB / 512МБ / 1ГБ / 2ГБ DDR2
Основная
Максимальная ёмк ость памя ти 4 ГБ
память
Модуль памя ти с однока наль ным
режимом DDR2
Не подде рживае т за рег истриров анные

256MB / 512МБ / 1ГБ / 2ГБ DDR2
Максимальная ёмк ость памя ти 4 ГБ
Модуль памя ти с однока наль ным
режимом DDR2
Не подде рживае т за рег истриров анные

модули DIMM and ECC DIMM
ITE 8712F
Обеспечива ет на ибо лее испо льзуемые

действ ующие функциона льные
возможности Super I/O.
Инте рфейс с низким к оличеством
выводов
Инициа тивы по охране ок ружающей

среды,
Аппара тный монитор
Регуля тор скорости
Функция ITE "Smart Guardian"
(Интелле ктуа льна я защ ита)

Встроенное устройств о у прав ления
встрое нными интерфе йсами устройств

Super I/O

IDE

SATA

Режим " хозяина" ш ины Ultra DMA 33 / 66 / Режим " хозяина" ш ины Ultra DMA 33 / 66 /
100 / 133
100 / 133
Подде ржка режима PIO 0~4,
Подде ржка режима PIO 0~4,
Встроенное последов ате льное
устройс тво управле ния ATA
скорость передач и данных до 1.5
гига бит/с.
Соотве тств ие специф икации SATA версия

Встроенное последов ате льное
устройс тво управле ния ATA
скорость передач и данных до 1.5
гига бит/с.
Соотве тств ие специф икации SATA версия

1.0.

P4M900 Micro 775
Ver 5.x

Ver 6.x

Realtek RTL 8201CL
Автоматическое сог ласова ние 10 / 100
Локаль на
Мб/с
я сеть
Частич ная / полная дуплексна я
способнос ть

Realtek RTL 8201CL
Автоматическое сог ласова ние 10 / 100
Мб/с
Частич ная / полная дуплексна я
способнос ть

Звуково й
кодек

ALC888
Звукова я поддержка High-De finition
7.1кана льный звуков ой выход

ALC861VD
Звукова я поддержка High-De finition
5.1кана льный звуков ой выход

Слоты

Слот PCI
Слот PCI Ex press x16
Слот PCI Ex press x 1

x2
x1
x1

Слот PCI
Слот PCI Ex press x16
Слот PCI Ex press x 1

x2
x1
x1

Разъём
Разъём
Разъём
Разъём

x1
x2
x2
x1

Разъём
Разъём
Разъём
Разъём

x1
x2
x2
x1

НГМД
IDE
SATA
на лицево й пане ли

Входно й звук овой раз ъём
x1
Разъём вв ода для CD
x1
Разъём выво да для S/PDIF
x1
Встроенн Контак тирующее приспосо бле ние
ый разъём вентиля тора централь ного процессора x1

Задняя
пане ль
средств

Входно й звук овой раз ъём
x1
Разъём вв ода для CD
x1
Разъём выво да для S/PDIF
x1
Контак тирующее приспосо бле ние
вентиля тора централь ного процессора x1

Контак тирующее приспосо бле ние
вентиля тора системы
x1
Открытое контак тирующее
прис пособление CMOS
x1
USB-разъём
x2

Разъем питания ( 24 вывод)
Разъем питания ( 4 вывод)

x1
x1

Разъем питания ( 24 вывод)
Разъем питания ( 4 вывод)

x1
x1

Клавиа тура PS/ 2
Мышь PS/2
Последо вате льный по рт

x1
x1
x1

Клавиа тура PS/ 2
Мышь PS/2
Последо вате льный по рт

x1
x1
x1

x1
x1
x1
x4

Порт подключ ения принтера
Порт VGA
Порт LAN
USB-порт
Гнездо для по дключ ения

x1
x1
x1
x4

наушников

Порт подключ ения принтера
Порт VGA
ввода-выв Порт LAN
ода
USB-порт
Гнездо для по дключ ения
наушников
Размер
пане ли

НГМД
IDE
SATA
на лицево й пане ли

190 мм (Ш) X 244 мм (В)
Windows 2K / XP / VISTA
Biostar сохраня ет за собо й прав о

Подде ржк
добав лять или уда лять средс тва
а OS
обеспече ния для OS с или без
предварите льно го у ведом ления.

190 мм (Ш) X 244 мм (В)
Windows 2K / XP / VISTA
Biostar сохраня ет за собо й прав о
добав лять или уда лять средс тва
обеспече ния для OS с или без
предварите льно го у ведом ления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫‪Ver 6.x‬‬

‫‪Ver 5.x‬‬
‫‪LGA 775‬‬

‫‪LGA 775‬‬

‫‪Intel Core2Duo/ Pe ntium 4 / Pentium‬ﻡﻌﺎﻟﺠﺎت ‪Intel Core2Duo/ Pe ntium 4 / Pentium‬ﻡﻌﺎﻟﺠﺎت‬
‫ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ 3 . 8‬ﺝﻴﺠﺎ هﺮﺕﺰ ‪D / C eleron D‬‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰﻳ ﺔ‬

‫ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ 3 . 8‬ﺝﻴﺠﺎ هﺮﺕﺰ ‪D / C eleron D‬‬

‫‪Hyper -Thre ading / Exec ute Disabl e‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت ‪Hyper -Thre ading / Exec ute Disabl e‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬
‫‪Bit / Enhance d I ntel Spee dStep® /‬‬

‫‪Bit / Enhance d I ntel Spee dStep® /‬‬

‫‪Extende d Memor y 64 Technology‬‬

‫‪*It is recommended to use processors with *It is recommended to use processors with‬‬

‫اﻟ ﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ‬
‫اﻟﺠﺎﻥﺒﻲ‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬

‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬

‫‪95W power co nsumption.‬‬

‫ﻡﻴﺠﺎ هﺮﺕﺰ ‪ 533 / 800 / 1066‬ﺕﺮدد‬

‫‪VIA P4M900‬‬

‫‪VIA VT8237A‬‬

‫‪Chrome9 HC 3D / 2D Graphics‬‬

‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬

‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬

‫ﻋﺪد‪4‬‬

‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ 533 / 667‬ﺳﻌﺎت ‪ DDR2‬ﺕﺪﻋﻢ اﻟﺬاآﺮ ة ﻡﻦ ﻥﻮع‬

‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﺳﻌﺔ ‪ DDR2‬ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪ DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬

‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ ‪ 2 /‬ﺝﻴﺠﺎ ‪ /512‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬‬

‫ﻡﻴﺠ ﺎ ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ ‪ 2 /‬ﺝﻴﺠﺎ ‪ /512‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬‬

‫ﺑﺎﻳﺖ‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 4‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬

‫أﺣﺎدﻳﺔ اﻟﻘﻨﺎة ‪DDR2‬وﺣﺪة ذا آﺮة‬

‫اﻟﻤﺴﺠﻠﺔ وﺕﻠﻚ اﻟﺘ ﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡ ﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬

‫اﻟﻤﺴﺠﻠﺔ وﺕﻠﻚ اﻟﺘ ﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡ ﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ECC‬‬

‫‪ECC‬‬
‫‪ITE 8712F‬‬

‫‪ITE 8712F‬‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡ ًﺎ ‪ Super I /O .‬ﺕﻮﻓﺮ وﻇﻴﻔﺔ‬

‫‪Interface‬‬
‫‪Super I/O‬‬

‫‪ Low Pi n Count‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬

‫‪SATA‬‬

‫‪Interface‬‬

‫‪ Low Pi n Count‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬

‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣ ﺔ‬

‫‪ ITE‬ﻡﻦ "‪"Smart Guar dian‬وﻇﻴﻔﺔ‬

‫ﻡﺘﻜﺎﻡﻞ ‪ IDE‬ﻡﺘﺤﻜﻢ‬
‫ﻡﻨﻔﺬ ‪IDE‬‬

‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬

‫ﻋﺪد‪4‬‬

‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ 533 / 667‬ﺳﻌﺎت ‪ DDR2‬ﺕﺪﻋﻢ اﻟﺬاآﺮ ة ﻡﻦ ﻥﻮع‬

‫ﻡﺘﻜﺎﻡﻞ ‪ IDE‬ﻡﺘﺤﻜﻢ‬

‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬

‫وﺿﻊ رﺋﻴﺴﻲ‬

‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬

‫ﻡﺘﻜﺎﻡﻞ‪ Serial ATA‬ﻡﺘﺤﻜﻢ‬

‫ﻥﻘﻞ اﻟﺒﻴﺎ ﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ‪ 1.5‬ﺝﻴﺠﺎﺑﺖ‪ /‬ﺙﺎﻥﻴﺔ‪.‬‬

‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ‪ 1.5‬ﺝﻴﺠﺎﺑﺖ‪ /‬ﺙﺎﻥﻴﺔ‪.‬‬

‫‪ 1.0.‬اﻹﺹﺪار ‪ SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬

‫‪48‬‬

‫‪P4M900 Micro 775‬‬
‫‪Ver 5.x‬‬

‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬

‫آﻮدﻳﻚ اﻟﺼﻮ ت‬

‫‪Ver 6.x‬‬

‫‪Realtek RTL 8201CL‬‬

‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100 /10‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬

‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬

‫‪ALC888‬‬

‫‪ALC861VD‬‬

‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬

‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫‪5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت‬

‫‪7.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت‬

‫اﻟﻔﺘﺤﺎت‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺣ ﺔ‬

‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻓﺘﺤﺔ ‪PCI Expressx16‬‬

‫ﻋﺪد ‪2‬‬
‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻓﺘﺤﺔ ‪PCI Expressx16‬‬

‫ﻋﺪد ‪2‬‬
‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ‪IDE‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ‪IDE‬‬

‫ﻋﺪ د ‪2‬‬

‫ﻡﻨﻔﺬ‪SATA‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ‪SATA‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ‪CD-IN‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ‪CD-IN‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺥﺮج‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺥﺮج‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ا ﻟﻤﺮآﺰﻳﺔ‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﺎﻓﺬ دﺥﻞ‪ /‬ﺥﺮج‬

‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﻡﻨﻔﺬ ‪VGA‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ‪VGA‬‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻡﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪4‬‬

‫ﻡﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪4‬‬

‫ﻡﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد‪6‬‬

‫ﻡﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد‪3‬‬

‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬
‫دﻋﻢ أﻥﻈﻤﺔ‬
‫اﻟﺘﺸﻐﻴﻞ‬

‫‪49‬‬

‫‪ 190‬ﻡﻢ )ﻋﺮض (‪ 244 X‬ﻡﻢ ) ارﺕﻔﺎع(‬

‫‪Windows 2K / XP / VISTA‬‬

‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ‪ Biostar‬ﺕﺤ ﺘﻔﻆ‬

‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ‪ Biostar‬ﺕﺤﺘﻔﻆ‬

‫ﺕﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ﺑﺪون إﺥﻄﺎر ‪.‬‬

Motherboard Manual

JAPANESE
Ver 5.x

CPU

Ver 6.x

LGA 775

Intel Core2Duo/ Pe ntium 4 / Pentium D /

Celeron D pr ocessor up to 3.8 GHz

Hyper -Thre ading / Exec ute Disabl e Bit /

Enha nced Intel SpeedStep® / I ntel

Architecture-64 / Exte nde d Memory 64

Technol ogy をサポートします

*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
FSB

533 / 800 / 1066 MHz

チップセッ VIA P4M900
ト

VIA VT8237A

95W power co nsumption.
533 / 800 / 1066 MHz
VIA P4M900
VIA VT8237A

グラフィッ Chrome9 HC 3D / 2D Graphics

Chrome9 HC 3D / 2D Graphics

クス

最大の共有ビデオメモリは256MBです

DDR2 DIMMスロット x 2

DDR2 533 / 667をサポート

各DIMMは 256/ 512MB/1GB/ 2GB DDR2をサ 各DIMMは 256/ 512MB/1GB/ 2GB DDR2をサ
メインメモ
リ

Super I/O

IDE

SATA

ポート

最大メモリ容量4GB

シングル チャンネルモードDDR 2メモリモジュ シングル チャンネルモードDDR 2メモリモジュ
ール

ール

登録済みDIMMとECC DIMMはサポートされま

せん

ITE 8712F

もっとも一般に使用されるレガシーSuper I/O

機能を採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITEの「スマートガーディアン」機能

統合IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモー Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド

ド

PIO Mode 0~4のサポート、

統合シリアルATAコントローラ

最高1.5 Gb/秒のデータ転送速度

SATAバージョン1.0仕様に準拠。

P4M900 Micro 775
Ver 5.x
LAN PHY

サウンド
Codec

Ver 6.x

Realtek RTL 8201CL

10 / 100 Mb/秒のオートネゴシエーション

半/全二重機能

ALC888

ALC861VD

ハイデフィニションオーディオのサポート

7.1 チャンネルオーディオアウト

5.1 チャンネルオーディオアウト

PCIスロット

PCI Expr ess x16スロット

PCI Expr ess x 1スロット

フロッピーコネクタ

IDEコネクタ

SATAコネクタ

フロントパネルコネクタ

フロントオーディオコネクタ

CDインコネクタ

S/PDIFアウトコネクタ

CPUファンヘッダ

システムファンヘッダ

CMOSクリアヘッダ

USBコネクタ

電源コネクタ(24ピン)

電源コネクタ(4ピン)

PS/2キーボード

PS/2マウス

シリアルポート

背面パネル プリンタポート

プリンタポート

I/O

VGAポート

LANポート

USBポート

オーディオジャック

スロット

オンボード
コネクタ

ボードサイ
ズ
OSサポー
ト

190 mm (幅) X 244 mm (高さ)
Windows 2K / XP / VISTA

Biostarは事前のサポートなしにOSサポートを Biostarは事前のサポートなしにOSサポートを
追加または削除する権利を留保します。

追加または削除する権利を留保します。

2007/02/26

P4M900 Micro 775 BIOS Setup

BIOS Setup .................................................................................................1
1 Main Menu...............................................................................................3
2 Standard CMOS Features......................................................................7
3Advanced BIOS Features ........................................................................9
4 Advanced Chipset Features..................................................................17
5 Integrated Peripherals..........................................................................21
6 Power Management Setup....................................................................28
7 PnP/PCI Configurations.......................................................................33
8 PC Health Status ...................................................................................36
9 Performance Booster Zone...................................................................38

P4M900 Micro 775

BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the Award™ BIOS
Setup program on this motherboard. The Setup program allows users to modify
the basic system configuration and save these settings to CMOS RAM. The
power of CMOS RAM is supplied by a battery so that it retains the Setup
inform ation when the power is turned off.
Basic Input-Output System (BIOS) determines what a computer can do without
accessing programs from a disk. This system controls most of the input and
output devices such as keyboard, mouse, serial ports and disk drives. BIOS
activates at the first stage of the booting process, loading and executing the
operating system. Some additional features, such as virus and password
protection or chipset fine-tuning options are also included in BIOS.
The rest of this manual will to guide you through the options and settings in
BIOS Setup.

Plug and Pla y Support
This AWARD BIOS supports the Plug and Play Version 1.0A specifi cation and
ESCD (Extended System Configuration Data) write.

EPA Green PC Support
This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.

APM Support
This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power
Management (APM) speci fi cation. Power management features are
implemented via the System Management Interrupt (SMI). Sleep and Suspend
power management modes are supported. Power to the hard disk drives and
video monitors can also be managed by this AWARD BIOS.

ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power
interface speci fi cation (ACPI). It provides ASL code for power management
and device configuration capabilities as defined in the ACPI specifi cation,
developed by Microsoft, Intel and Toshiba.

P4M900 Micro 775
PCI Bus Support
This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral
Component Interconnect) local bus specification.

DRAM Support
DDR SDRAM (Double Data Rate Synchronous DRAM) is supported.

Supported CPUs
This AWARD BIOS supports the Intel CPU.

Using Setup
Use the arrow keys to highlight items in most of the place, press to
select, use the and keys to change entries, press for help
and press to quit. The following table provides more detail about how to
navigate in the Setup program by using the keyboard.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key
F1 key
F5 key
F7 key
F10 key

Function
Move to previous item
Move to next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Move to the item you desired
Increas e the numeric val ue or make c hanges
Decrease the numeric value or make changes
Increas e the numeric val ue or make c hanges
Decrease the numeric value or make changes
Main Menu – Quit and not s ave c hanges into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and r eturn to M ain Menu
General help on Setup navigation keys
Load pr evious values from CMOS
Load the opti mized defaults
Save all the CMOS c hanges and exit

P4M900 Micro 775

1 Main Menu
Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will
appear on the screen. The Main Menu allows you to select from several setup
functions. Use the arrow keys to select among the items and press to
accept and enter the sub-menu.
!! WARNING !!

For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described in
this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your
reference only. The actual BIOS information and settings on
board may be slightly different from this manual.
Figure 1: Main Menu

Standard CMOS Features
This submenu contains industry standard configurable options.

Advanced BIOS Features
This submenu allows you to configure advanced features of the BIOS.

P4M900 Micro 775
Advanced Chipset Features
This submenu allows you to configure special chipset features.

Integrated Peripherals
This submenu allows you to configure cert ain IDE hard drive options and
Programmed Input/ Output features.

Power Management Setup
This submenu allows you to configure the power managem ent features.

PnP/PCI Configurations
This submenu allows you to configure cert ain “ Plug and Play” and PCI options.

PC Health Status
This submenu allows you to monitor the hardware of your system.

Performance Booster Zone
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.
(However, we suggest you to use the default setting. Changing the voltage and
clock improperly may damage the CPU or M/B!)

Load Optimized Defaults
This selection allows you to reload the BIOS when problem occurs during
system booting sequence. These configurations are factory settings optimized
for this system. A confirmation message will be displayed before defaults are
set.

P4M900 Micro 775
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted with
to enter a password.

Set User Password
If the Supervisor Password is not set, then the User Password will function in
the same way as the Supervisor Password. If the Supervisor Password is set and
the User Password is set, the “User” will only be able to view configurations but
will not be able to change them.

Save & Exit Setup
Save all configuration changes to CMOS (memory) and exit setup. Confirmation
message will be displayed before proceeding.

Exit Without Sa ving
Abandon all changes made during the current session and exit setup.
Confirmation message will be displayed before proceeding.

P4M900 Micro 775
Upgrade BIOS
This submenu allows you to upgrade bios.

P4M900 Micro 775

2 Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into several categori es.
Each category includes no, one or more than one setup items. Use the arrow
keys to highlight the item and then use the or keys to select the
value you want in each item.
Figure 2: Standard CMOS Setup

Main Menu Selections
This table shows the items and the available options on the Main Menu.
Item

Options

Description

Date

mm : dd : yy

Set the system date. Note
that the ‘Day ’ automatically
changes when you set the
date.

Time

hh : mm : ss

Set the system internal
clock.

IDE Channel 0 Master

Options are in its sub
menu.

Press to enter the
sub menu of detailed
options

IDE Channel 0 Slav e

Options are in its sub
menu.

Press to enter the
sub menu of detailed
options.

P4M900 Micro 775
Item

Options

Description

IDE Channel 1 Master

Options are in its sub
menu.

Press to enter the
sub menu of detailed
options.

IDE Channel 1 Slav e

Options are in its sub
menu.

Press to enter the
sub menu of detailed
options.

360K, 5.25 in
1.2M, 5.25 in
Driv e A

720K, 3.5 in

Driv e B

1.44M, 3.5 in

Select the ty pe of f loppy
disk drive installed in your
sy stem.

2.88M, 3.5 in
None
All Errors
No Errors
Halt On

All, but Key board
All, but Diskette

Select the situation in which
y ou want the BIOS to stop
the POST process and
notify y ou.

All, but Disk/ Key
Base Memory

N/A

Displays the amount of
conv entional memory
detected during boot up.

Extended Memory

N/A

Displays the amount of
extended memory detected
during boot up.

Total Memory

N/A

Displays the total memory
av ailable in the system.

P4M900 Micro 775

3Advanced BIOS Features
Figure 3: Advanced BIOS Setup

Boot Seq & Floppy Setup
This item allows you to setup boot sequence & Floppy.

P4M900 Micro 775
Hard Disk Boot Priority
The BIOS will attempt to arrange the Hard Disk boot sequence automatically.
You can change the Hard Disk booting sequence here.

The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB
HDD1, USB HDD2, and Bootable Add-in Cards.
First/Second/Third Boot Dev ice
The BIOS will attempt to load the operating system in this order.
The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP 100, USB-FDD,
USB-ZIP , USB-CDROM, LAN, Disabled.

Boot Other Dev ice
When enabled, BIOS will try to load the operating system from other device
when it failed to load from the three devices above.
The Choices: Enabled (default), Disabled

Sw ap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical
drive assignments.
The Choices: Disabled (default), Enabled.

P4M900 Micro 775
Boot Up Floppy Seek
When enabled, System will test the floppy drives to determine if they have 40
or 80 tracks during boot up. Disabling this option reduces the time it takes to
boot-up.
The Choices: Enabled (default), Disabled.

Shadow Setup

This item allows you to setup cache & shadow setup.
Figure 3.2: Shadow Setup

Video BIOS Shadow
Determines whether video BIOS will be copied to RAM for faster execution or
not.
Enabled (default) Optional ROM is enabled.
Disabled Optional ROM is disabled.

P4M900 Micro 775
Cache Setup

CPU L1 & L2 Cache
Depending on the CP U/chipset in use, you may be able to increase me mory
access time with this option.
Enabled (default) Enable cache.
Disabled

Disable cache.

CPU L3 Cache
Depending on the CP U/chipset in use, you may be able to increase me mory
access time with this option.
Enabled (default) Enable cache.
Disabled

Disable cache.

CPU L2 Cache ECC Checking
This item allows you to enable/disable CPU L2 Cache ECC Checking.
The Choices: Enabled (default), Disabled.

P4M900 Micro 775
CPU Feature

Delay Prior to Thermal
Set this item to enable the CP U Thermal function to engage after the specified
time.
The Choices: 4 Min, 8 Min, 16Min (default), 32 Min.

Thermal Management
This option allows you to select the way to control the “ Thermal Management.”
The Choices: Thermal Monitor 1 (default), Thermal Monitor 2.

TM2 Bus Ratio
This option represents the frequency (bus ratio) of the throttled performance
state that will be initiated when the on-die sensor detects temperature increase.
Min=

Max= 255

Key in a DEC number.

The Choices: 0 X (default)

TM2 Bus VID
This option represents the voltage of the throttled performance state that will be
initiated when the on-die sensor detects temperature increase.
The Choices: 0.8375V (default), 0.8375-1.6000.

P4M900 Micro 775
Limit CPUID MaxVal
Set Limit CP UID MaxVal to 3, it should be “ Disabled” for Windows XP .
The Choices: Disabled (default), Enabled.

C1E Function
This item allows you to configure the Enhanced Halt State (C1E) function,
which may reduce the power consumption of your system when the system is
idle.
The Choices: Auto (default)，Disabled.

Execute Disable Bit
This item allows you to configure the Execute Disabled Bit function, which
protects your system from buffer overflow attacks.
The Choices: Enabled (default), Disabled.

Virtualization Technology
Virtualization Technology can virtually separate your system resource into
several parts, thus enhance the performance when running virtual machines or
multi interface systems.
The Choices: Enabled (default), Disabled.

Virus Warning
This option allows you to choose the VIRUS Warning feature that is used to
protect the IDE Hard Disk boot sector. If this function is enabled and an attempt
is made to write to the boot sector, BIOS will display a warning message on the
screen and sound an alarm beep.
Disabled (default) Virus protection is disabled.
Enabled
Virus protection is activated.

Hyper-Threading Technology
This option allows you to enable or disabled Hyper-Threading Technology.
“ Enabled” for Windows XP and Linux 2.4.x (OS optimized for
Hyper-Threading Technology). “ Disable” for other OS (OS not optimized for
Hyper-Threading Technology).
The Choices: Enabled (default), Disabled.

P4M900 Micro 775
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Disabled
Normal POST.
Enabled (default) Enable quick POST.

Boot Up NumLock Status
Selects the NumLock State after the system switched on.
The Choices:
On (default) Numpad is number keys.
Off
Numpad is arrow keys.

Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can
be configured.
The Choices: Disabled (default), Enabled.

Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30.

Typematic Dela y (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke.
The Choices: 250 (default), 500, 750, 1000.

Security Option
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
A password is required for the system to boot and is also
required to access the Setup Utility.
Setup (default):
A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.

P4M900 Micro 775
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor speci fication.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.

OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.

Small Logo(EPA) Show
This item allows you to select whether the “Small Logo” shows. Enabled
(default) “ Small Logo” shows when system boots up. Disabled No “Small
Logo” shows when system boots
The Choices: Enabled (default), Disabled

Summary Screen Show
This item allows you to enable/disable the summary screen.
means system configuration and PCI device listing.
The Choices: Disabled (default), Enabled.

Summary screen

P4M900 Micro 775

4 Advanced Chipset Features

This submenu allows you to configure the speci fic features of the chipset
installed on your system. This chipset manage bus speeds and access to system
memory resources, such as DRAM. It also coordinates communications with the
PCI bus. The default settings that came with your system have been optimized
and therefore should not be changed unless you are suspicious that the settings
have been changed incorrectly.
Figure 4: Advanced Chipset Setup

P4M900 Micro 775
AGP & P2P Bridge Control
Highlight “Press Enter” next to the “ AGP & P2P Bridge Control” label and
pressing the enter key will take you a submenu with the following options:
Figure 4.1:

AGP & P2P Bridge Control

VGA Share Memory Size
This item allows you to select the VGA share memory size.
The Choices: 64M (default), 128M, 256M, 512M, Disabled

Direct Frame Buffer
This item allows you to disabled or enabled direct frame buffer
The Choices: Disabled (default), Enabled.

P4M900 Micro 775
CPU & PCI Bus Control
By highlighting the “Press Enter” label next to the “CPU & PCI Bus Control”
and press the enter key, it will take you a submenu with the following options:
Figure 4.2: CPU & PCI Bus Control

PCI Master 0 WS Write
When enabled, writes to the P CI bus are executed with zero-wait states.
The Choices: Enabled (default), Disabled.

PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Select Enabled to support compliance with P CI
specification.
The Choices: Enabled (default), Disabled.

Vlink mode selection
This item allows you to select Vlink mode.
The Choices: B y Auto (default), Mode 0 , Mode 1, Mode 2, Mode 3, Mode 4.

P4M900 Micro 775
VLink 8X Support
This item allows you to enable or disable VLink 8X support.
The Choices: Enabled (default), Disabled.

VIA PWR Management
The Choices: Enabled (default), Disabled.

Memory Hole
You can reserve this area of system memory for ISA adapter ROM. When this
area is reserved it cannot be cached. Check the user information of peripherals
that need to use this area of system memory for the memory requirements.
The Choices: Disabled (default), Enabled.

System BIOS Cacheable
Selecting the “ Enabled” option allows caching of the system BIOS ROM at
F0000h-FFFFFh, which is able to improve the system performance. However,
any programs that attempts to write to this memory block will cause conflicts
and result in system errors.
The Choices: Enabled (default), Disabled.

Top Performance
The Choices: Disabled (default), Enabled.

P4M900 Micro 775

5 Integrated Peripherals
Figure 5. Integrated Peripherals

VIA OnChip IDE Device
Highlight the “Press Enter” label next to the “ VIA OnChip IDE Device” label
and press enter key will take you a submenu with the following options:

P4M900 Micro 775
SATA Controller
This option allows you to enable the on-chip Serial ATA.
The Choices: Enabled (default), Disabled.

SATA Controller Mode
This option allows you to select SATA Mode.
The Choices: RAID, IDE (default).

IDE DMA Transfer Access
This item allows you to enable or disable the IDE DMA transfer access.
The Choices: Enabled (default), Disabled.

On-chip IDE Channel 0/1
The motherboard chipset contains a P CI IDE interface with support for two
IDE channels. Select “ Enabled” to activate the first and/or second IDE interface.
Select “ Disabled” to deactivate an interface if you are going to install a primary
and/or secondary add-in IDE interface.
The Choices: Enabled (default), Disabled.

IDE Prefetch Mode
The “ onboard” IDE drive interfaces supports IDE prefetch function for faster
drive access. If the interface on your drive does not support prefetching, or if
you install a primary and/or secondary add-in IDE interface, set this option to
“ Disabled”.
The Choices: Enabled (default), Disabled.

Primary/Secondary/Master/Slave PIO
The IDE P IO (P rogrammed Input / Output) fields let you set a P IO mode (0-4)
for each of the IDE devices that the onboard IDE interface supports. Modes 0
to 4 will increase performance progressively. In Auto mode, the system
automatically determines the best mode for each device.
The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

P4M900 Micro 775
Primary/Secondary/Master/Slave UDMA
Ultra DMA function can be implemented if it is supported by the IDE hard
drives in your system. As well, your operating environment requires a DMA
driver (Windows 95 or OSR2may need a third party IDE bus master driver). If
your hard drive and your system software both support Ultra DMA, select Auto
to enable BIOS support.
The Choices: Auto (default), Disabled.

IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sectors read / write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block mode (most new drives do), select Enabled for automatic detection of the
optimal number of block read / write per sector where the drive can support.
The Choices: Enabled (default), Disabled.

P4M900 Micro 775
VIA OnChip PCI Device

Highlight the “Press Enter” label next to the “ VIA OnChip PCI Device” label
and press the enter key will take you a submenu with the following options:
Figure 5.2: VIA OnChip PCI Device

Azalia HDA Controller
This option allows you to control the onboard HD audio.
The Choices: Auto (default), Disabled.

LAN Controller
This option allows you to control the onboard LAN.
The Choices: Enabled (default), Disabled

Lan Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
The Choices: Disable (default), Enabled.

P4M900 Micro 775
Super IO Device
Press Enter to configure the Super I/O Device.

Onboard FDC Controller
Select enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you installed another FDC or the
system uses no floppy drive, select disabled in this field.
The Choices: Enabled (default), Disabled.

Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial
ports.
The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
Auto.

Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices: 378/IRQ 7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP .

P4M900 Micro 775
The Choices:
SPP (de fault)

Using P arallel port as Standard P rinter Port.

EPP

Using P arallel P ort as Enhanced P arallel Port.

ECP

Using P arallel port as Extended Capabilities P ort.

ECP +EPP

Using P arallel port as ECP & EPP mode.

ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.

P4M900 Micro 775
USB De vice Setting
Press Enter to configure the USB Device.

USB 1.0/2.0 Controller
These options allow you to enable or disable the USB 1.0/2.0 controller
function.
The Choices: Enabled (default), Disabled.

USB Operation Mode
This option let you select the operation mode of USB function.
The Choices: High Speed (default), Full/Low Speed.

USB Keyboard/Mouse/Storage Function
These options allow you to enable or disable the USB keyboard/mouse/storage
devices.
The Choices: Enabled (default), Disabled.

USB Mass Storage Dev ice Boot Setting
These options allow you to choose the boot up type of the USB mass storage
devices..
The Choices: Auto mode (default), FDD mode, HDD mode.

P4M900 Micro 775

6 Power Management Setup
The Power Management Setup Menu allows you to configure your system to
utilize energy conservation and power up/power down features.
Figure 6. Power Management Setup

ACPI Function
This item displays the status of the Advanced Configuration and Power
Management (ACPI).
The Choices: Enabled (default), Disabled.

ACPI Suspend Type
The item allows you to select the suspend type under the ACPI operating
system.
The Choices: S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS+STR

P4M900 Micro 775
Power Management
This category allows you to select the power saving method and is directly
related to the following modes:
1. HDD Power Down.
2. Suspend Mode.
There are three options of Power Management, three of which have fixed mode
settings
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max. Power Saving
Maximum power management only available for sl CPU’s.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Define (default)
Allow you to set each option individually.
When you choose user define, you can adjust each of the item from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min. to 15 min.

HDD Power Down
When enabled, the hard-disk drives will power down after a set time of system
inactivity. All other devices remain active.
The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7
Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.

Suspend Mode
The item allows you to adjust the system idle time before suspend.
The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min,
20 Min, 30 Min, 40 Min, 1 Hour.

Video Off Option
This field determines when to activate the video off feature for monitor power
management.
The Choices: Suspend→Off (default), Always on.

P4M900 Micro 775
Video Off Method
This option determines the manner when the monitor goes blank.
V/H SYNC+Blank (default)
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.

Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA.

Soft-Off by PWRBTN
This item determines the behavior of system power button. Instant off turn off
the power immediately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system power.
The Choices: Delay 4 Sec, Instant-Off (default).

Run VGABIOS if S3 Resume
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA card
when system wakes up from S3 state. The system resume time is shortened if
you disable the function, but system will need AGP driver to initialize the card.
So, if the AGP driver of the VGA card does not support the initialization feature,
the display may work abnormally or not function after S3.
The Choices: Auto (default), Yes, No.

Ac Loss Auto Restart
This setting specifies how your system should behave aft er a power fail or
interrupts occurs. By choosing off will leave the computer in the power off stat e.
Choosing On will reboot the computer. Former-Sts will restore the system to the
status before power failure or interrupt occurs.
The Choices: Off (default), On, Former-Sts.

P4M900 Micro 775
Wakeup Event Detect
Figure 6.1:IRQ/Event Activity Detect
Highlight the “Press Enter” label next to the “ IRQ/Event Activity Detect” label
and press the enter key will take you a submenu with the following options:

PS2KB Wakeup Select
When select P assword, please press Enter key to change password with a
maxi mu m length of 8 characters.
The Choices: Hot Key (default), P assword.

PS2KB Wakeup from S3/ S4/ S5
This item allows you to wake up from S3/ S4/ S5 with P S2 keyboard.
The Choices: Disabled (default), Ctrl+F1, Ctrl+F2. Ctrl+F3, Ctrl+F4, Ctrl+F5,
Ctrl+F6, Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power,
Wake, Any Key.

PS2MS Wakeup from S3/ S4/ S5
This item allows you to wake up from S3/ S4/ S5 with P S2 mouse.
The Choices: Disabled (default), Enabled.

USB Resume from S3
This item allows you to wake up from S3 with USB device.

P4M900 Micro 775
The Choices: Disabled (default), Enabled.

Wake Up On PCIE
When set to Enabled, P CI-Express device will be able to wake up the system.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard
to enable if applicable.
The Choices: Disabled (default), Enabled.

PowerOn by PCI Card
When you select Enabled, a P ME signal from P CI card returns the system to
Full ON state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard
to enable if applicable.
The Choices: Disabled (default), Enabled.

Modem Ring Resume
This item allows you to disable or enable Modem Ring Resume function.
The Choices: Disabled (default), Enabled.

RTC Alarm Resume
When “ Enabled”, you can set the date and time at which the RTC (real-time
clock) alarm awakens the system fro m Suspend mode.
The Choices: Disabled (default), Enabled.

Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when “ RTC Resume” is set to “ Enabled”.

Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up. This field
is only configurable when “ RTC Resume” is set to “ Enabled”.

P4M900 Micro 775

7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating with its
own special components. This section covers some very techni cal items and it is
strongly recommended that only experienced users should make any changes to
the default settings.

Figure 7: PnP/PCI Configurations

PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for the boot
sequence (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP
operating system like Window™ 95. When set to NO, BIOS will initialize all
the PnP cards. For non-PnP operating systems (DOS, Netware™), this option
must set to NO.
The Choices: No (default), Yes.

P4M900 Micro 775
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: PCIEx (default), PCI Slot, Onboard, AGP.

Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record
which resources are assigned and protects resources from conflict.
Every peripheral device has a node, which is called ESCD. This node records
which resources are assigned to it. The system needs to record and update ESCD
to the memory locations. These locations are reserved in the system BIOS. If the
Disabled (default) option is chosen, the system‘s ESCD will update only when
the new configuration varies from the last one. If the Enabled option is chosen,
the system is forced to update ESCDs and then is automatically set to the
“ Disabled” mode.
The above settings will be shown on the screen only if “ Manual” is chosen for
the resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus
and provides non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource
is assigned to the PCI Bus or provides for ISA PnP add-on cards and
peripherals.
The Choices: Disabled (default), Enabled.

Resources Controlled By
By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for
add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
The Choices: Auto (ESCD) (default), Manual.

P4M900 Micro 775
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending
on the type of device using the interrupt. When you press the “ Press Enter” tag,
you will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when “ Resources Controlled By” is set to
“Manual”.
IRQ-3
assigned to PCI Device
IRQ-4
assigned to PCI Device
IRQ-5
assigned to PCI Device
IRQ-7
assigned to PCI Device
IRQ-9
assigned to PCI Device
IRQ-10
assigned to PCI Device
IRQ-11
assigned to PCI Device
IRQ-12
assigned to PCI Device
IRQ-14
assigned to PCI Device
IRQ-15
assigned to PCI Device

PCI / VGA Palette Snoop
Some old graphic controllers need to “ snoop” on the VGA palette and then map
it to their display as a way to provide boot inform ation and VGA compatibility.
This item allows such snooping to take place.
The Choices: Disabled (default), Enabled

Assign IRQ For VGA
This item allows the users to choose which IRQ to assign for the VGA.
The Choices: Enabled (default), Disabled.

Assign IRQ For USB
This item allows the users to choose which IRQ to assign for the USB.
The Choices: Enabled (default), Disabled.

Maximum Payload Size
Set the maximum payload size for Transaction packets (TLP).
The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.

P4M900 Micro 775

8 PC Health Status
Figure 8: PC Health Status

Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item is
only effective under Windows 98 ACPI mode.
The Choices: 70℃/ 158℉, 75℃/ 167℉, 80℃/ 176℉, 85℃/ 185℉(default).

CPU FAN Control by
Choose “ smart” to reduce the noise caused by CPU FAN.
The Choices: Smart, Always On (default).

CPU Fan Load (Sharp=0)
The Choices: Min=0, Max=7; key in a DEC number.

CPU Fan Start (℃)
CPU fan starts to work under smart fan function when arrive this set value.
The Choices: Min=0, Max=100; key in a DEC number.

P4M900 Micro 775
CPU Fan Full speed <℃>
When CPU temperature is reach the set value, the CPU fan will work under Full
Speed.
The Choices: Min=0, Max=100; key in a DEC number.

Start PWM Value (%)
When CPU temperature arrives to the set value, the CPU fan will work under
Smart Fan Function mode. The range is from 0~127, with an interval of 1.
The Choices: Min=0, Max=100; key in a DEC number.

Slope PWM Level (%/℃)
Increasing the value of slope PWM will raise the speed of CPU fan.
The Choices: 3.1%/℃ Medium(default), 0.0%/℃, 0.8%/℃, 1.6%/℃,6.3%/℃
High,12.5%/℃, 25.0%/℃, 50.0%/℃.

CPU Vcore, NB Vcore, +3.3V, +5.0V, +12V, DRAM Voltage,
VTT Voltage, Voltage Battery
Detect the system’s voltage status automatically.

Current CPU Temp
This field displays the current temperature of CPU.

Current CPU FAN Speed
This field displays the current speed of CPU fan.

Current SYS FAN Speed
This field displays the current speed SYSTEM fan.

Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.

P4M900 Micro 775

9 Performance Booster Zone

Figure 9: Performance Booster Zone

DRAM Clock/Drive Control

This item controls the DRAM Clock. Highlight “Press Enter” next to the
“ DRAM Clock/Drive Control” label and pressing the enter key will take you a
submenu with the following options:
Figure 9.1: DRAM Clock/Drive Control

P4M900 Micro 775
DRAM Clock
This item determines DRAM clock.
The Choices: B y SPD (default), 100MHz, 133MHz, 166MHz, 200MHz,
266MHz, 333MHz .

DRAM Timing
This item determines DRAM clock/ timing.
The Choices: Auto by SPD (default), Manual, Turbo, Ultra.

SDRAM CAS Latency
When DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM timing.
The Choices: 2.5 /4(default).

Bank Interleave
This item allows you to enable or disable the bank interleave feature.
The Choices: Disabled (default).

Precharge to Active (tRP)
This item allows you to specify the delay from precharge command to activate
command.
The Choices: 4T (default).

Activ e to Precharge (tRAS)
This item allows you to specify the minimum row active time (tRAS).
The Choices: 07T (default).

Activ e to CMD (tRCD)
Use this item to specify the delay from the activation of a bank to the time that
a read or write command is accepted.
The Choices: 4T (default).

REF to ACT/REF to REF (Trfc)
This item allows you to determine the selection for REF to ACT/REF to REF
(tRFC).
The Choices: 20T/21T (default).

P4M900 Micro 775
ACT (0) to ACT (1) (tRRD)
This item allows you to determine the selection for ACT (0) to ACT (1) (tRRD)
The Choices: 3T (default).

1T CMD Support
The Choices: Disable (default), Auto.

DDR2 On Die Termination
This option allows you to choose the working type of ODT.
The Choices: ODT Always ON (default), Dynamic ODT, ODT Always OFF.

CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
Special Notice:
If the system’s frequency that you are selected is not functioning, there are two
methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ ON” status. All
the CMOS data will be loaded as defaults setting.
Method 2:
Press the key and Power button simultaneously, after that keep-on
pressing the key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the
CPU Vcore and clock are not in default setting, it may cause CPU or M/B
damage.
The Choices: 100MHz(default); Min=100, Max=400, key in a DEC number.

Async PCIE CLOCK
This item allows you to select Async PCIE clock.
Min= 100 Max=150 Key in a DEC number.
The Choices: 100MHz(default) ; Min=100, Max=150, key in a DEC number.

CPU Clock Ratio
This item allows you to select the CPU Ratio.
Min= 6 Max= 50 Key in a DEC number.
The Choices: 6X (default).

P4M900 Micro 775
Spread Spectrum
This item allows you to enable/disable the Spread Spectrum function.
The Choices:+/- 0.25% (default), +/- 0. 5%, Disabled, -0.5%, -1.0%.

DDR Voltage
This item allows you to select DDR Voltage.
The Choices: StartUp (default), +0.10V, +0.20V, +0.30V, +0.40V, +0.50V,
+0.60V, +0.70V.

CPU Voltage
This item allows you to select CPU Voltage.
The Choices: StartUp (default), +0.012V~+0.787V.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2007:02:27 10:17:11Z
Modify Date                     : 2007:06:20 12:32:04+08:00
Page Count                      : 93
Creation Date                   : 2007:02:27 10:17:11Z
Mod Date                        : 2007:06:20 12:32:04+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 94089(Moe)
Metadata Date                   : 2007:06:20 12:32:04+08:00
Creator                         : 94089(Moe)
Title                           : Microsoft Word - P4M90-M7_0226C.doc

EXIF Metadata provided by EXIF.tools

Biostar P4M900 Micro 775 Owners Manual P4M90 M7_0226C

Navigation menu

Versions of this User Manual:

Views

Navigation