Biostar Tp43D2 A7 Owners Manual IP45A A7T_IP43A A7T_080507

2014-07-31

: Biostar Biostar-Tp43D2-A7-Owners-Manual biostar-tp43d2-a7-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 61

Download
Open PDF In Browser	View PDF

TP45D2-A7/TP43D2-A7 Setup Manual

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents
Chapter 1: Introduction ............................................................ 1
1.1
Before You Start......................................................................................... 1
1.2
Package Checklist ..................................................................................... 1
1.3
Motherboard Features.............................................................................. 2
1.4
Rear Panel Connectors.............................................................................. 3
1.5
Motherboard Layout................................................................................. 4
Chapter 2: Hardware Installation ............................................. 5
2.1
Installing Central Processing Unit (CPU) ............................................... 5
2.2
FAN Headers.............................................................................................. 7
2.3
Installing System Memory ........................................................................ 8
2.4
Connectors and Slots................................................................................ 10
Chapter 3: Headers & Jumpers Setup ..................................... 12
3.1
How to Setup Jumpers............................................................................. 12
3.2
Detail Settings .......................................................................................... 12
Chapter 4: T-Series BIOS & Software ..................................... 20
4.1
T-Series BIOS............................................................................................. 20
4.2
T-Series Software...................................................................................... 28
Chapter 5: Useful Help ............................................................ 37
5.1
Driver Installation Note.......................................................................... 37
5.2
Extra Information.................................................................................... 38
5.3
AMI BIOS Beep Code ............................................................................... 39
5.4
Troubleshooting ....................................................................................... 40
Appendencies: SPEC In Other Language ................................ 42
German.................................................................................................................. 42
France .................................................................................................................... 44
Italian..................................................................................................................... 46
Spanish ................................................................................................................... 48
Portuguese ............................................................................................................ 50
Polish...................................................................................................................... 52
Russian ................................................................................................................... 54
Arabic..................................................................................................................... 56
Japanese ................................................................................................................ 58

TP45D2-A7/TP43D2-A7

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.

PACKAGE CHECKLIST
HDD Cable X 1
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may differ by area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx processor

Supports Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended

FSB
Chipset

Memory 64 Technology / Virtualization

Technology

Support 800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

ITE 8718F

Provides the most commonly used legacy Super Provides the most commonly used legacy Super
I/O functionality.

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

Hardware Monitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

DIMM Slots x 4

Each DIMM supports 256MB / 512MB / 1GB /

2GB DDR2

Main

Max Memory Capicity 8GB

Memory

Dual Channel Mode DDR2 memory module

Supports DDR2 1066 / 800 / 667

Registered DIMM and ECC DIMM is not

supported

JMicro JMB368

Super I/O

IDE

SATA 2

LAN

Sound
Codec

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4

supports PIO Mode 0~4

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant

Realtek RTL 8111C

10 / 100 Mb/s / 1Gb/s auto negotiation

Half / Full duplex capability

ALC662

5.1 channels audio out

High Definition Audio

TP45D2-A7/TP43D2-A7
TP45D2-A7

TP43D2-A7

PCI slot

PCI Express Gen2 x 16 slot

PCI Express x 1 slot

Floppy connector

Printer Port Connector

Serial port Connector

IDE Connector

SATA Connector

Front Panel Connector

Front Audio Connector

On Board

CD-in Connector

Connector

CPU Fan header

System Fan header

Clear CMOS header

USB connector

Slots

Back Panel
I/O

Board Size

Power Connector (24pin)

Power Connector (4pin)

PS/2 Keyboard

PS/2 Mouse

LAN port

USB Port

Audio Jack

220 (W) x 305 (L) mm

Windows 2000 / XP / VISTA

OS Support Biostar Reserves the right to add or remove
support for any OS with or without notice

1.4

Biostar Reserves the right to add or remove
support for any OS with or without notice

REAR PANEL CONNECTORS
LAN

PS/2
Mouse

Line In/
Surround
Line Out
Mic In 1/
Bass/ Center

PS/2
Keyboard

USBX2

USB X2

USBX2

Motherboard Manual

1.5

MOTHERBOARD LAYOUT

JATXPWR2
JCFAN1

LGA775
JKBV1

CPU1

JKBMS1

DDR2_B2

JUSB1

DDR2_B1

JUSBV1

DDR2_A2

DDR2_A1

JUSB2

Intel
P45/P43

JRJ45USB1
JAUDIOF1

JAUDIO1
JSFAN2

J1
JCDIN1

PEX1_1
JATXPWR1

PEX16_1

LAN

JCMOS1

PEX1_2

Intel
ICH10

BAT1

CODEC

SATA2
SATA3
SATA4

PCI1

SATA5

IDE

Super
I/O

LED_D1 SATA6
LED_D2

PCI2

JSFAN1

IDE1

PCI3
JCOM1

BIOS
SATA1

JPRNT1

JUSBV2

RSTSW2

FDD1

JUSB3

JUSB4

JUSB5

JPANEL1 PWRSW1

Note: ■ represents the 1 pin.
4

TP45D2-A7/TP43D2-A7

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.

Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.

TP45D2-A7/TP43D2-A7

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

JCFAN1: CPU Fan Header
4
1

Pin
1
2
3
4

Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control

JSFAN1/JSFAN2: System Fan Headers

JSFAN2
3

1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense

JSFAN1
Note:
The JSFAN1/JSFAN2 support 3-pin head connectors, and the JCFAN1 supports 4-pin
head connector. When connecting with wires onto connectors, please note that the red
wire is the positive and should be connected to pin#2, and the black wire is Ground and
should be connected to GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

DDR2_B1
DDR2_B2

DDR2_A1
DDR2_A2

A. Memory Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

TP45D2-A7/TP43D2-A7

B. Memory Capacity
DIMM Socket
Location

DDR2 Module

DDR2_A1

256MB/512MB/1GB/2GB

DDR2_A2

256MB/512MB/1GB/2GB

DDR2_B1

256MB/512MB/1GB/2GB

DDR2_B2

256MB/512MB/1GB/2GB

Total Memory
Size

Max is 8GB.

C. Dual Channel Memory installation
To trigger the Dual Channel function of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pairs, shown in the following
table.
Dual Channel Status DDR2_A1 DDR2_A2 DDR2_B1 DDR2_B2
Enabled

Enabled

(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)

Motherboard Manual

2.4

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.

IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
The IDE connector can connect a master and a slave drive, so you can connect
up to two hard disk drives.

TP45D2-A7/TP43D2-A7

PEX16_1: PCI-Express Gen2 x16 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.

PEX1_1/PEX1_2: PCI-Express x1 Slots
-

PCI-Express 1.1 compliant.
Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth over the PCI architecture.

PEX1_1
PEX16_1

PEX1_2

PCI1~PCI3: Peripheral Component Interconnect Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1
PCI2
PCI3

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
++ -

9
1

+ SPK

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

16
8

RST
HLED

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function
N/A
N/A
Power LED
Power-on button

TP45D2-A7/TP43D2-A7

JATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

JATXPWR2: ATX Power Source Connector
By connecting this connector, it will provide +12V to CPU power circuit.
1 4

Pin
1
2
3
4

Assignment
+12V
+12V
Ground
Ground

Note:
Before power on the system, please make sure that both JATXPWR1 and JATXPWR2
connectors have been plugged-in.
13

Motherboard Manual

J1: Auxiliary Power for Graphics
This connector is an auxiliary power connection for graphics cards. Exclusive
power for the graphics card provides better graphics performance.

Assignment

1
2
3
4

+12V
Ground
Ground
VCC

SATA1~SATA6: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

SATA1
SATA2
SATA3
SATA4
SATA5
SATA6

Pin
1
2
3
4
5
6
7

Assignment
Ground
TX+
TXGround
RXRX+
Ground

TP45D2-A7/TP43D2-A7

JUSB3/JUSB4/JUSB5: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

JUSB4
JUSB3 JUSB5
2

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

JAUDIOF1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

Motherboard Manual

JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the variaty devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Pin
1
2
3
4

1
4

Assignment
Left Channel Input
Ground
Ground
Right Channel Input

JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.
3
1

Pin 1-2 Close:
Normal Operation (default).

3
1

Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.

TP45D2-A7/TP43D2-A7

On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.

LED_D1
LED_D2

LED_D1 and LED_D2:
These 2 LED indicate system power on diagnostics.
Please refer to the table below for different messages:
LED_D1
ON
ON
OFF
OFF

LED_D2
ON
OFF
ON
OFF

Message
Normal
Memory Error
VGA Error
Abnormal: CPU / Chipset error.

On-Board Buttons
There are 2 on-board buttons.

RSTSW2
PWRSW1

PWRSW1:
This is an on-board Power Switch button.
RSTSW2:
This is an on-board Reset button.

Motherboard Manual

JPRNT1: Printer Port Connector
This header allows you to connect printer on the PC.

2
1

Pin
1
2
3
4
5
6

-Strobe
-ALF
Data 0
-Error
Data 1
-Init

Assignment

Pin
14
15
16
17
18
19

Ground
Data 6
Ground
Data 7
Ground
-ACK

Assignment

7
8
9
10
11
12
13

Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5

20
21
22
23
24
25
26

Ground
Busy
Ground
PE
Ground
SCLT
Key

JCOM1: Serial port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
Key

TP45D2-A7/TP43D2-A7

JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1/JUSB2/JRJ45USB1.
JUSBV2: +5V for USB ports at JUSB3/JUSB4/JUSB5.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at JUSB1/JUSB2/ JRJ45USB1.
JUSBV2: +5V STB for USB ports at JUSB3/JUSB4/JUSB5.

3
1

1
Pin 1-2 close

JUSBV1
3

JUSBV2
1

1
Pin 2-3 close

JKBV1: Power Source Header for PS/2 Keyboard and Mouse
3
1

3
1
Pin 1-2 close
+5V for PS/2 keyboard and
mouse.

3
1
Pin 2-3 close
+5V STB for PS/2 keyboard
and mouse.

Motherboard Manual

CHAPTER 4: T-SERIES BIOS & SOFTWARE
4.1

T-SERIES BIOS
T-Series BIOS Features
Overclocking Navigator Engine (O.N.E.)
Memory Integration Test (M.I.T., under Overclock Navigator Engine)
BIO-Flasher: Update BIOS file from USB Flash Drive or FDD
Self Recovery System (S.R.S)
Smart Fan Function
CMOS Reloading Program

!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described below in
this manual is for your reference only and the actual BIOS
information and settings on board may be different from this
manual. For further information of setting up the BIOS, please
refer to the BIOS Manual in the Setup CD.

A. Overclocking Navigator Engine (O.N.E.)
ONE provides two powerful overclocking engines: MOS and AOS for both
Elite and Casual overclockers.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[ x10.0]
CPU Frequency Setting
[266]
Over Clock Retry Count
[3]
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

O.N.E

Exit
Options

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

TP45D2-A7/TP43D2-A7

Manual Overclock System (M.O.S.)
MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Over-Clocking Navigator setting

Exit
Options

WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Options
Intel(R) SpeedStep(tm) tech
[Enabled]
Normal
Ratio CMOS Setting
[ x10.0]
Automate
CPU Frequency Setting
[266] OverClock
Manual
Over Clock Retry Count
[3] OverClock
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

↓
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Manual OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[ x10.0]
CPU Frequency Setting
[266]
Over Clock Retry Count
[3]
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

Exit
Options

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Intel(R) SpeedStep(tm) Tech
This item allows you to enable SpeedStep technology for better power
saving. SpeedStep is a technology built into some Intel processors that
allows the clock speed of the processor to be dynamically changed by
software.

Ratio CMOS Setting
This item allows you to set the CPU ratio frequency.

CPU Frequency Setting
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
21

Motherboard Manual
Over Clock Retry Count
This item allows you to set the overclock fail retry times.

FSB(Bsel) To NorthBridge Latch
This item allows you to select the FSB Frequency.

DRAM Frequency
To get better system performance, sometimes downgrading the memory
frequency is necessary when CPU frequency is adjusted over the upper
limit.

DDR2 Enhanced Mode
This item allows you to control the DDR2 ram enhanced mode.

DRAM Timing Configuration
Enter this item for more advanced DRAM timing settings.

Clock Gen Configuration
Enter this item for more advanced Clock Gen settings.

ALL Voltage Configuration
Enter this item for more advanced voltage settings.

NOTE
Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.

Automatic Overclock System (A.O.S.)
For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single step.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Options
Intel(R) SpeedStep(tm) tech
[Enabled]
Normal
Ratio CMOS Setting
[ x10.0]
Automate
CPU Frequency Setting
[266] OverClock
Manual
Over Clock Retry Count
[3] OverClock
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

O.N.E

Exit
Options

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

TP45D2-A7/TP43D2-A7
V6 Tech Engine
This engine will make a good over-clock performance.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Exit

O.N.E

Over-Clocking Navigator setting

Options

WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[ x10.0]
CPU Frequency Setting
[266]
Over Clock Retry Count
[3]
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

V6-Tech Engine
V8-Tech Engine
V12-Tech Engine

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

V8 Tech Engine
This engine will make a better over-clock performance.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Exit

O.N.E

Over-Clocking Navigator setting

Options

WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V8-Tech Engine]
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[ x10.0]
CPU Frequency Setting
[266]
Over Clock Retry Count
[3]
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

V6-Tech Engine
V8-Tech Engine
V12-Tech Engine

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

V12 Tech Engine
This engine will make a best over-clock performance.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Over-Clocking Navigator setting
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Over-Clocking Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V12-Tech Engine]
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[ x10.0]
CPU Frequency Setting
[266]
Over Clock Retry Count
[3]
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
[Auto]
DDR2 Enhanced Mode
[Auto]
> DRAM Timing Configuration
> Clock Gen
Configuration
> ALL Voltage Configuration
Memory Test
[Disabled]

Exit
Options

V6-Tech Engine
V8-Tech Engine
V12-Tech Engine

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Motherboard Manual
Notices:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.

B. Memory Integration Test (M.I.T.)
This function is under “Overclocking Navigator Engine” item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is “Disabled”; the condition parameter should
be changed to “Enable” to proceed this test.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Exit
Options

Disabled
Enabled

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

↓
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Exit
Options

Disabled
Enabled

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from “Enable” to “Disable”
to complete the test.
24

TP45D2-A7/TP43D2-A7

C. BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

Motherboard Manual

D. Self Recovery System (S.R.S.)
This function can’t be seen under BIOS setup; and is always on whenever the
system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default BIOS
setting, and all overclock settings will be re-configured.

E. Smart Fan Function
Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Exit

O.N.E

Advanced Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
>
>
>
>
>
>
>
>

CPU Configuration
SuperIO Configuration
Hardware Health Configuration
Smart Fan Configuration
PM/ACPI Configuration
Intel VT-d Configuration
USB Configuration
Config Onboard PCI/PCI-E Devices

Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

↓
Advanced

BIOS SETUP UTILITY

Smart Fan Configuration
CPU Smart Fan
Smart Fan Calibration
Control Mode
Fan Ctrl OFF(oC)
o
Fan Ctrl On( C)
Fan Ctrl Start value
Fan Ctrl Sensitive

[Disabled]

When you choice [Auto]
,[3Pin] or [4Pin],
please run the
calibration to define
the Fan parameters for
Smart Fan control

+F1
F10
ESC

Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit

TP45D2-A7/TP43D2-A7
Smart Fan Calibration
Choose this item and then the BIOS will automatically test and detect the
CPU/System fan functions and show CPU/System fan speed.

Control Mode
This item provides several operation modes of the fan.

Fan Ctrl OFF(℃)
If the CPU/System temperature is lower than the set value, the CPU/
System fan will turn off. The range is from 0~127, with an interval of 1.

Fan Ctrl On(℃)
The CPU/System fan starts to work when CPU/System temperature
arrives to this set value. The range is from 0~127, with an interval of 1.

Fan Ctrl Start Value
When CPU/System temperature arrives to the set value, the CPU/System
fan will work under Smart Fan Function mode. The range is from 0~127,
with an interval of 1.

Fan Ctrl Sensitive
Increasing the value of slope PWM will raise the speed of CPU/System fan.
The range is from 1~127, with an interval of 1.

F. CMOS Reloading Program
It allows users to save different CMOS settings into BIOS-ROM.
Users are able to reload any saved CMOS setting for customizing system
configurations. Moreover, users are able to save an ideal overclock setting
during overclock operation.
There are 10 sets of record addresses in total, and users are able to name the
CMOS data according to personal preference.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Exit

Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Security Settings

CMOS Backup Func
CMOS Data Reload
CMOS Data Save

> Security
CMOS Backup Function

Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Motherboard Manual

4.2

T-SERIES SOFTWARE

Installing T-Series Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching T-Series Software
After the installation process, you will see the software icon “T-Utility
OverClock III” / “HW Monitor” / “eHOT Line” / “Tseries BIOS Update” appears
on the desktop. Double-click the icon to launch T-Series utility.

OverClock 3
OverClock 3 is equipped with friendly interface and solid over-clock features, and it
will help you easily do over-clocking under windows environment.
Double-click the desktop icon, OverClock 3 will be launched; the first window
you will see is Main Panel. In this panel you will see current CPU Speed and
CPU/Memory/PCI-E/PCI Clock.

Open
Over Clock
Panel

Open
Over Voltage
Panel

ON/OFF

Ope n a saved setting/
Save cur r ent se ttings

Open
Abou t Pane l

TP45D2-A7/TP43D2-A7
Over Clock Panel
Restore Default Settings
AUTO Over-Clock
V3/V6/V9 Engine
Real-time Ove r-clock

Manual Adjust CPU Clock
Test & Apply Manual Setting s

AUTO
User can click this button and the utility will set the best and stable
performance and frequency automatically. A warning dialog as below will
show up to notify you that the system may become unstable, click on “OK”
to continue.

Motherboard Manual
Then the utility will execute a series of testing until system fail. Then
system will do fail-safe reboot by using Watchdog function. After reboot,
launch the utility again and the utility will load the previously verified best
and stable frequency.
V3 / V6 / V9
Provide user the ability to do real-time over-clock adjustment. For
beginners in over-clock field, this is a powerful feature to increase system
performance.

V3 Engine
This engine will make a good over-clock performance.
V6 Engine
This engine will make a better over-clock performance.
V9 Engine
This engine will make a best over-clock performance.

TEST
You can also manually adjust CPU clock by pressing +/- button or moving
the level bar. After manually adjust the CPU clock, you should click
TEST button and the utility will proceed a testing for current frequency. If
the testing is ok, then the current frequency will be saved into system
registry. If the testing fails, system will do a fail-safe rebooting. After reboot,
the utility will restore to the hardware default setting.
Warning
Manually over-clock is potentially dangerous, especially when the over-clocking
percentage is over 110 %. We strongly recommend you test every speed you
over-clock by click the TEST button. Or, you can just click AUTO over-clock
button and let the Utility automatically get the best result for you.

RESET
Click this button and the utility will restore all values to the hardware
default setting.

TP45D2-A7/TP43D2-A7
Over Voltage Panel

Manual Adjust
CPU/Memo ry/Chipset/FSB Voltage

CPU Voltage
This function allows user to adjust CPU voltage.
or “-“ to decrease the CPU voltage.

Click on “+” to increase

Memory Voltage
This function allows user to adjust Memory voltage.
increase or “-“ to decrease the Memory voltage.

Click on “+” to

Chip Voltage
This function allows user to adjust Chipset voltage.
increase or “-“ to decrease the Chipset voltage.

Click on “+” to

FSB Voltage
This function allows user to adjust FSB voltage.
or “-“ to decrease the FSB voltage.

Click on “+” to increase

Motherboard Manual
About Panel
In this panel, you can get model
name and other system information
that may related to over-clocking.
You can also get the version number
of this software.
Note
Because the Over Clock and Over
Voltage features are controlled by
several separate chipset, the utility
divides these features to separate
panels. If one chipset is not on
board, the correlative button in Main
panel will be disabled, but it will not
interfere with other panels’ functions.
This property can make the utility
more robust.

Hardware Monitor
HW Monitor is a monitor utility that helps you to maintain the health of the PC.
It provides real-time information of CPU/GPU/System temperature, fan speed,
and voltage.
This area shows volt age information

Voltage Panel

This area shows CPU inf ormation

Turn to Fan Panel
This area shows CPU/System t emperat ure

Fan Panel

This area shows CPU/System f an speed
Turn to Voltage P anel

TP45D2-A7/TP43D2-A7

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represent s import ant
*information
that you
must provide. Without
this informat ion, you may
not be able to send out
the mail.

This block will show
the information which
would be collect ed in
the mail.

condition
* Describe
of your system.

your area or
* Select
the area close to you.
Provide the e-mail
address that you would
like to send t he copy to.
the name of
* Provide
the memory module
manufacturer.

Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.

Exit this dialog.

Save these information to a .txt file

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
33

Motherboard Manual

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

TP45D2-A7/TP43D2-A7

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS

Show current BIOS information

AMI BIOS

Clear CMOS function
(Only for AWARD BIOS)

Save current BIOS
to a .bin file

Update BIOS
with a BIOS file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.
35

Motherboard Manual

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this
manual.
36

TP45D2-A7/TP43D2-A7

CHAPTER 5: USEFUL HELP
5.1

DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
37

Motherboard Manual

5.2

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

TP45D2-A7/TP43D2-A7

5.3

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
39

Motherboard Manual

5.4

TROUBLESHOOTING
Probable

Solution

No power to the system at all
1.
Make sure power cable is
Power light don’t illuminate, fan
securely plugged in.
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on keyboard does
not turn on.
System inoperative. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard drive is spinning.
module snaps into place.
System does not boot from hard disk
1.
Check cable running from disk to
drive, can be booted from optical drive.
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from optical drive.
1.
Back up data and applications
Hard disk can be read and applications
files.
can be used but booting from hard disk 2.
Reformat the hard drive.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

TP45D2-A7/TP43D2-A7

This page is intentionally left blank.

Motherboard Manual

APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx Prozessoren

Unterstützt Execute Disable Bit / Enhanced Intel Unterstützt Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended

FSB
Chipsatz

Super E/A

Memory 64 Technology / Virtualization

Technology

800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

ITE 8718F

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller/-Überwachung

"Smart Guardian"-Funktion von ITE

DDR2 DIMM-Steckplätze x 4

Jeder DIMM unterstützt 256MB / 512MB / 1GB / Jeder DIMM unterstützt 256MB / 512MB / 1GB /
2GB DDR2.
Arbeitsspeich Max. 8GB Arbeitsspeicher
er

IDE

SATA

2GB DDR2.
Max. 8GB Arbeitsspeicher

Dual-Kanal DDR2 Speichermodul

Unterstützt DDR2 1066 / 800 / 667

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

JMicro JMB368

Ultra DMA 33 / 66 / 100 / 133 Bus

Master-Modus

Unterstützt PIO-Modus 0~4,

Integrierter Serial ATA-Controller

Datentransferrate bis zu 3.0Gb/s

Konform mit der SATA-Spezifikation Version 2.0. Konform mit der SATA-Spezifikation Version 2.0.
LAN

Realtek RTL 8111C

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

TP45D2-A7/TP43D2-A7
TP45D2-A7
HD

TP43D2-A7

ALC662

Audio-Unters Unterstützt High-Definition Audio
tützung
Steckplätze

Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe

PCI-Steckplatz

PCI Express Gen2 x16 Steckplatz

x3
x1

PCI Express x 1-Steckplatz

Diskettenlaufwerkanschluss

Druckeranschluss Anschluss

Serieller Anschluss

IDE-Anschluss

SATA-Anschluss

Fronttafelanschluss

Onboard-Ans Front-Audioanschluss

Front-Audioanschluss

chluss

CD-IN-Anschluss

CPU-Lüfter-Sockel

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

Stromanschluss (24-polig)

Stromanschluss (4-polig)

PS/2-Tastatur

PS/2-Maus

LAN-Anschluss

USB-Anschluss

Audioanschluss

Rückseiten-E
/A

Platinengröße 220 mm (B) X 305 mm (L)

220 mm (B) X 305 mm (L)

Windows 2000 / XP / VISTA

Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ein

Betriebssystem hinzuzufügen oder zu

entfernen.

OS-Unterstüt
zung

Motherboard Manual

FRANCE
TP45D2-A7

TP43D2-A7

LGA 775

Processeurs Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx

Prend en charge les technologies d'exécution de Prend en charge les technologies d'exécution de
bit de désactivation / Intel SpeedStep®

bit de désactivation / Intel SpeedStep®

optimisée/ d'architecture Intel 64 / de mémoire optimisée/ d'architecture Intel 64 / de mémoire
étendue 64 / de virtualisation
Bus frontal 800 / 1066 / 1333 / 1600 MHz
Chipset

Super E/S

Mémoire
principale

IDE

SATA

LAN

800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

ITE 8718F

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur /moniteur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Fentes DDR2 DIMM x 4

Chaque DIMM prend en charge des DDR2 de

256Mo / 512Mo / 1Go / 2Go

Capacité mémoire maximale de 8Go

Module de mémoire DDR2 à mode à double voie Module de mémoire DDR2 à mode à double voie
Prend en charge la DDR2 1066 / 800 / 667

Prend en charge la DDR2 1066 / 800 / 667

Les DIMM à registres et DIMM avec code

correcteurs d'erreurs ne sont pas prises en

charge

JMicro JMB368

Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 /
133

133

Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré :

Taux de transfert jusqu'à 3.0Go/s.

Conforme à la spécification SATA Version 2.0

Realtek RTL 8111C

10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique
Half / Full duplex capability

étendue 64 / de virtualisation

Half / Full duplex capability

TP45D2-A7/TP43D2-A7
TP45D2-A7

TP43D2-A7

Prise en

ALC662

charge

Prise en charge de l'audio haute définition

audio HD

Sortie audio à 5.1 voies

Fentes

Fente PCI

Fente PCI Express Gen2 x16

Fente PCI Express x1

Connecteur de disquette

Connecteur de Port d'imprimante

Port série

Connecteur IDE

Connecteur SATA

Connecteur du panneau avant

Connecteur Audio du panneau avant x1

Connecteur Connecteur d'entrée CD

Connecteur d'entrée CD

embarqué

Embase de ventilateur UC

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

Connecteur d'alimentation

Embase de ventilateur UC

(24 broches)
Connecteur d'alimentation

(24 broches)
x2

(4 broches)

Connecteur d'alimentation

(4 broches)

Clavier PS/2

E/S du

Souris PS/2

panneau

Port LAN

arrière

Port USB

Fiche audio

Dimensions
de la carte

220 mm (l) X 305 mm (H)

Windows 2000 / XP / VISTA

Windows 2000 / XP /VISTA

Support SE Biostar se réserve le droit d'ajouter ou de

Biostar se réserve le droit d'ajouter ou de

supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Processore Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx

Supporto di Execute Disable Bit / Enhanced Supporto di Execute Disable Bit / Enhanced
Intel SpeedStep® / Architettura Intel 64 / Intel SpeedStep® / Architettura Intel 64 /

FSB
Chipset

Super I/O

Tecnologia Extended Memory 64 /

Tecnologia V irtualization

800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

ITE 8718F

Fornisce le funzionalità legacy Super I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller / Monitoraggio velocità ventolina Controller / Monitoraggio velocità ventolina
Funzione "Smart Guardian" di ITE

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR2 x 4

Ciascun DIMM supporta DDR2 256MB /

512MB / 1GB / 2GB

Memoria

Capacità massima della memoria 8GB

principale

Modulo di memoria DDR2 a canale doppio

Supporto di DDR2 1066 / 800 / 667

DIMM registrati e DIMM ECC non sono

supportati

JMicro JMB368

Modalità Bus Master Ultra DMA 33 / 66 /

100 / 133

Supporto modalità PIO Mode 0-4

Controller Serial ATA integrato

Velocità di trasferimento dei dati fino a

3.0Gb/s.

IDE

SATA

Compatibile specifiche SATA Versione 2.0. Compatibile specifiche SATA Versione 2.0.

LAN

Realtek RTL 8111C

Negoziazione automatica 10 / 100 / 1000

Mb/s

Capacità Half / Full Duplex

TP45D2-A7/TP43D2-A7
TP45D2-A7
Supporto
audio HD

ALC662

Supporto audio High-Definition (HD)

Uscita audio 5.1 canali

Alloggio PCI
Alloggi

TP43D2-A7

ALC662

Alloggio PCI Express Gen2 x16 x1

Alloggio PCI

Alloggio PCI Express Gen2 x16 x1

Alloggio PCI Express x1

Connettore floppy

Connettore Porta stampante

Porta seriale

Connettore IDE

Connettore SATA

Connettore pannello frontale

Connettore audio frontale

Connettori Connettore CD-in

Connettore audio frontale

Connettore CD-in

su scheda Collettore ventolina CPU

Collettore ventolina CPU

Collettore ventolina sistema

Collettore cancellaz ione CMOS

Connettore USB

Connettore alimentazione

(24 pin)
Connettore alimentazione

(24 pin)
x2

(4 pin)

Connettore alimentazione

(4 pin)

Tastiera PS/2

I/O

Mouse PS/2

pannello

Porta LAN

Porta USB

Connettore audio

posteriore Porta USB
Connettore audio
Dimension
i scheda
Sistemi
operativi
supportati

220 mm (larghezza) x 305 mm (altezza)

Windows 2000 / XP / VISTA

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

Motherboard Manual

SPANISH
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Procesador Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx

Admite Bit de deshabilitación de ejecución / Intel Admite Bit de deshabilitación de ejecución / Intel
SpeedStep® Mejorado / Intel Architecture-64 / SpeedStep® Mejorado / Intel Architecture-64 /
Tecnología Extended Memory 64 / Tecnología de Tecnología Extended Memory 64 / Tecnología de
virtualización

FSB

800 / 1066 / 1333 / 1600 MHz

virtualización
800 / 1066 / 1333 / 1600 MHz

Conjunto de Intel P45

Intel P43

chips

Intel ICH10

ITE 8718F

Le ofrece las funcionalidades heredadas de uso

más común Súper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Súper E/S

Controlador/monitor de velocidad de ventilador Controlador/monitor de velocidad de ventilador
Función "Guardia inteligente" de ITE

Función "Guardia inteligente" de ITE

Ranuras DIMM DDR2 x 4

Cada DIMM admite DDR de 256MB / 512MB /

1GB / 2GB

Memoria

Capacidad máxima de memoria de 8GB

principal

Módulo de memoria DDR2 de canal Doble

Admite DDR2 de 1066 / 800 / 667

No admite DIMM registrados o DIMM

compatibles con ECC

JMicro JMB368

IDE

SATA

Red Local

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,

Soporte los Modos PIO 0~4,

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3.0 Gb/s.

Compatible con la versión SATA 2.0.

Realtek RTL 8111C

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

TP45D2-A7/TP43D2-A7
TP45D2-A7
Soporte de
sonido HD

Ranuras

TP43D2-A7

ALC662

Soporte de sonido de Alta Definición

Salida de sonido de 5.1 canales

Ranura PCI

X3
X1

Ranura PCI Express Gen2 x16

Ranura PCI express x 1

Conector disco flexible

Conector Puerto de impresora

Puerto serie

Conector IDE

Conector SATA

Conector de panel frontal

Conector de sonido frontal

Conectores Conector de entrada de CD

Conector de entrada de CD

en placa

Cabecera de ventilador de CPU

Cabecera de ventilador de sistema X2

Cabecera de borrado de CMOS

Conector USB

Conector de alimentación

(24 patillas)
Conector de alimentación

(24 patillas)

(4 patillas)

Teclado PS/2

Panel

Ratón PS/2

trasero de

Puerto de red local

E/S

Puerto USB

Conector de sonido

Tamaño de
la placa

220 mm. (A) X 305 Mm. (H)

Soporte de Windows 2000 / XP / VISTA

220 mm. (A) X 305 Mm. (H)
Windows 2000 / XP / VISTA

sistema

Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar

operativo

el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Processador Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx

Suporta as tecnologias Execute Disable Bit /

Enhanced Intel SpeedStep® / Intel Arquitecture Enhanced Intel SpeedStep® / Intel Arquitecture
-64 / Extended Memory 64 / Virtualization
FSB
Chipset

-64 / Extended Memory 64 / Virtualization

800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

ITE 8718F

Proporciona as funcionalidades mais utilizadas

em termos da especificação Super I/O.

Especificaçã Interface LPC (Low Pin Count).

Interface LPC (Low Pin Count).

o Super I/O Iniciativas para controlo do ambiente

Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador/Monitor da velocidade da ventoinha Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE

Função "Smart Guardian" da ITE

Ranhuras DIMM DDR2 x 4

Cada módulo DIMM suporta uma memória

DDR2 de 256 MB / 512 MB / 1GB / 2GB

Memória

Capacidade máxima de memória:8 GB

principal

Módulo de memória DDR2 de canal duplo

Suporta módulos DDR2 1066 / 800 / 667

Os módulos DIMM registados e os DIMM ECC

não são suportados

JMicro JMB368

IDE

SATA

LAN
Suporte
para áudio
de alta
definição

Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,

Suporta o modo PIO 0~4,

Controlador Serial ATA integrado

Velocidades de transmissão de dados até 3.0

Gb/s.

Compatibilidade com a especificação SATA

versão 2.0.

Realtek RTL 8111C

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

ALC662

Suporta a especificação High-Definition Audio

Saída de áudio de 5.1 canais

TP45D2-A7/TP43D2-A7
TP45D2-A7
Ranhuras

TP43D2-A7

Ranhura PCI

x3
x1

Ranhura PCI Express Gen2 x16

Ranhura PCI Express x 1

Conector da unidade de disquetes

Conector da para impressora

Porta série

Conector IDE

Conector SATA

Conector do painel frontal

Conector de áudio frontal

Conector para entrada de CDs

Conectores Conector da ventoinha da CPU

Conector da ventoinha da CPU

na placa

Conector da ventoinha do sistema

Conector da ventoinha do sistema
Conector para limpeza do CMOS

Conector para limpeza do CMOS

Conector USB

Conector de alimentação

(24 pinos)
Conector de alimentação

(24 pinos)
x2

(4 pinos)
Entradas/S
aídas no
painel
traseiro
Tamanho
da placa
Sistemas
operativos
suportados

Conector de alimentação

(4 pinos)

Teclado PS/2

Rato PS/2

Porta LAN

Porta USB

Tomada de áudio

220 mm (L) X 305 mm (A)

Windows 2000 / XP / VISTA

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema

operativo com ou sem aviso prévio.

Motherboard Manual

POLISH
TP45D2-A7

Procesor

TP43D2-A7

LGA 775

Procesor Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx

Obsługa Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended

FSB
Chipset

Memory 64 Technology / Virtualization

Technology

800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

Gniazda DDR2 DIMM x 4

Każde gniazdo DIMM obsługuje moduły 256MB / Każde gniazdo DIMM obsługuje moduły 256MB /
512MB / 1GB / 2GB

512MB / 1GB / 2GB

Pamięć

Maks. wielkość pamięci 8GB

główna

Moduł pamięci DDR2 z trybem podwójnego

kanału

Obsługa DDR2 1066 / 800 / 667

Brak obsługi Registered DIMM oraz ECC DIMM

ITE 8718F

Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super

Super I/O

IDE

SATA

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler/Monitor prędkości wentylatora

Funkcja ITE "Smart Guardian"

JMicro JMB368

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsługa PIO tryb 0~4,

obsługa PIO tryb 0~4,

Zintegrowany kontroler Serial ATA

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0.

Realtek RTL 8111C

10 / 100 / 1000 Mb/s z automatyczną negocjacją 10 / 100 / 1000 Mb/s z automatyczną negocjacją
LAN

Obsługa
audio HD

szybkości

Działanie w trybie połowicznego / pełnego

dupleksu

ALC662

Obsługa High-Definition Audio

5.1 kanałowe wyjście audio

TP45D2-A7/TP43D2-A7
TP45D2-A7
Gniazda

Złącza

TP43D2-A7

Gniazdo PCI

Gniazdo PCI Express Gen2 x16

Gniazdo PCI Express x 1

Złącze napędu dyskietek

x1
x1

Złącze Port drukarki

Port szeregowy

Złącze IDE

Złącze SATA

Złącze panela przedniego

Przednie złącze audio

Złącze wejścia CD

wbudowane Złącze główkowe wentylatora
procesora

Złącze główkowe wentylatora
x1

Złącze główkowe wentylatora
systemowego

Back Panel
I/O

Wymiary
płyty

procesora

Złącze główkowe wentylatora
x2

systemowego

Złącze główkowe kasowania CMOS x1

Złącze USB

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Port LAN

Port USB

Gniazdo audio

220 mm (S) X 305 mm (W)

Obsluga

Windows 2000 / XP / VISTA

systemu

Biostar zastrzega sobie prawo dodawania lub

operacyjne odwoływania obsługi dowolnego systemu

odwoływania obsługi dowolnego systemu

operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Процессор Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

(центральн Celeron 4xx

Celeron 4xx

ый

Поддержка технологий Execute Disable Bit /

процессор) Enhanced Intel SpeedStep® / Intel

Enhanced Intel SpeedStep® / Intel

Architecture-64 / Extended Memory 64

Technology / технологии виртуализация

FSB

800 / 1066 / 1333 / 1600 МГц

Набор

Intel P45

Intel P43

микросхем Intel ICH10
Слоты DDR2 DIMM x 4

Intel ICH10
Слоты DDR2 DIMM x 4

Каждый модуль DIMM поддерживает 256 МБ / Каждый модуль DIMM поддерживает 256 МБ /
512МБ / 1ГБ / 2ГБ DDR2
Основная
память

512МБ / 1ГБ / 2ГБ DDR2

Максимальная ёмкость памяти 8ГБ

Модуль памяти с двухканальным режимом

DDR2

Поддержка DDR2 1066 / 800 / 667

Не поддерживает зарегистрированные

модули DIMM and ECC DIMM

ITE 8718F

Обеспечивает наиболее используемые

действующие функциональные возможности действующие функциональные возможности
Super I/O.
Super I/O

IDE

SATA

Super I/O.

Интерфейс с низким количеством выводов

Инициативы по охране окружающей среды,

Аппаратный монитор

Регулятор скорости вентилятора/ монитор

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

JMicro JMB368

Режим "хозяина" шины Ultra DMA 33 / 66 / 100 Режим "хозяина" шины Ultra DMA 33 / 66 / 100
/ 133

/ 133

Поддержка режима PIO 0~4,

Встроенное последовательное устройство

управления ATA

скорость передачи данных до 3.0 гигабит/с. скорость передачи данных до 3.0 гигабит/с.
Соответствие спецификации SATA версия 2.0. Соответствие спецификации SATA версия 2.0.
Realtek RTL 8111C

Realtek RTL 8111C

Локальная Автоматическое согласование 10 / 100 / 1000 Автоматическое согласование 10 / 100 / 1000
сеть

Мб/с

Частичная / полная дуплексная способность

TP45D2-A7/TP43D2-A7
TP45D2-A7
Звуковая
поддержка
жесткого
диска
Слоты

TP43D2-A7

ALC662

Звуковая поддержка High-Definition

5.1канальный звуковой выход

Слот PCI

Слот PCI Express Gen2 x16

Слот PCI Express x 1

Разъём НГМД

Разъём Порт подключения

принтера

Последовательный порт

Разъём IDE

Разъём SATA

Разъём на лицевой панели

Входной звуковой разъём

Разъём ввода для CD

Встроенны Разъём ввода для CD
x1
й разъём
Контактирующее приспособление

вентилятора центрального процессора x1

Контактирующее приспособление

Контактирующее приспособление
x2

Открытое контактирующее

панель
средств
ввода-выв
ода
Размер
панели

Контактирующее приспособление

вентилятора центрального процессора x1
вентилятора системы

Задняя

вентилятора системы

Открытое контактирующее

приспособление CMOS

USB-разъём

Разъем питания (24 вывод)

Разъем питания (4 вывод)

Клавиатура PS/2

Мышь PS/2

Порт LAN

USB-порт

Гнездо для подключения
наушников

Гнездо для подключения
x3

наушников

220 мм (Ш) X 305 мм (В)

Windows 2000 / XP / VISTA

Поддержка Biostar сохраняет за собой право добавлять

Biostar сохраняет за собой право добавлять

или удалять средства обеспечения для OS с

или без предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫‪TP43D2-A7‬‬

‫‪TP45D2-A7‬‬
‫‪LGA 775‬‬

‫‪LGA 775‬‬

‫‪Intel Core2Duo / Core2Quad /‬ﻣﻌﺎﻟﺠﺎت‬

‫‪Pentium Dual-Core / Celeron Dual-Core /‬‬

‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪Celeron 4xx‬‬

‫اﻟﻤﺮآﺰﻳﺔ‬

‫‪Execute Disable Bit / Enhanced Intel‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬

‫‪SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended‬‬
‫‪Memory 64 Technology / Virtualization‬‬

‫‪Memory 64 Technology / Virtualization‬‬

‫‪Technology‬‬

‫اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ﻣﻴﺠﺎ هﺮﺕﺰ ‪ 800 / 1066 / 1333 / 1600‬ﺕﺮدد‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬

‫ﻣﻴﺠﺎ هﺮﺕﺰ ‪ 800 / 1066 / 1333 / 1600‬ﺕﺮدد‬

‫‪Intel P45‬‬

‫‪Intel P43‬‬

‫‪Intel ICH10‬‬

‫ﻓﺘﺤﺔ ‪DDR2 DIMM‬‬

‫ﻋﺪد‪4‬‬

‫ﻓﺘﺤﺔ ‪DDR2 DIMM‬‬

‫ﻋﺪد‪4‬‬

‫ﻣﻴﺠﺎ ‪ 256/512‬ﺳﻌﺔ ‪ DDR2‬ﺕﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻣﻴﺠﺎ ‪ 256/512‬ﺳﻌﺔ ‪ DDR2‬ﺕﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺑﺎﻳﺖ و‪ 2‬ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫‪Super I/O‬‬

‫ﻣﻨﻔﺬ ‪IDE‬‬

‫‪SATA‬‬

‫ﺷﺒﻜﺔ داﺧﻠﻴﺔ‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬

‫ﺑﺎﻳﺖ و‪ 2‬ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬

‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR2‬وﺣﺪة ذاآﺮة‬

‫ﺳﻌﺎت ‪ 1066 / 800 / 667‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ‪DDR2‬ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬

‫‪ ECC‬وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬

‫‪ITE 8718F‬‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺕﻮﻓﺮ وﻇﻴﻔﺔ‬

‫‪Low Pin Count Interface‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬

‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬

‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬

‫ﻣﺘﻜﺎﻣﻞ‪IDE‬ﻣﺘﺤﻜﻢ ‪JMicro JMB368‬‬

‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬

‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬

‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬

‫ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.0.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ‬

‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬

‫‪Realtek RTL 8111C‬‬

‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬

‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬

‫‪56‬‬

‫‪TP45D2-A7/TP43D2-A7‬‬
‫‪TP45D2-A7‬‬
‫دﻋﻢ اﻝﺼﻮت ﻋﺎﻝﻲ‬
‫اﻝﺘﻌﺮیﻒ‬

‫‪TP43D2-A7‬‬

‫‪ALC662‬‬

‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ‬

‫‪Intel‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ‬

‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد ‪3‬‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد ‪3‬‬

‫ﻓﺘﺤﺔ‪PCI Express x16 Gen2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ‪PCI Express x16 Gen2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻓﺘﺤﺔ ‪PCI Express x 1‬‬

‫ﻋﺪد ‪2‬‬

‫ﻓﺘﺤﺔ ‪PCI Express x 1‬‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬

‫ﻋﺪد‪1‬‬

‫ﻣﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬

‫ﻋﺪد‪1‬‬

‫ﻣﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد ‪6‬‬

‫ﻣﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد ‪6‬‬

‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫اﻝﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬

‫ﻋﺪد ‪1‬‬

‫اﻝﻠﻮﺣﺔ‬

‫ﻣﻨﻔﺬ ‪CD-IN‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪CD-IN‬‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪2‬‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪2‬‬

‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪3‬‬

‫ﻣﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪3‬‬

‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪2‬‬

‫ﻟﻮﺣﺔ ﻣﻔﺎﺕﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺣﺔ ﻣﻔﺎﺕﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻣﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻣﺤﻠﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪6‬‬

‫ﻣﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪6‬‬

‫ﻣﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪3‬‬

‫ﻣﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪3‬‬

‫اﻟﻔﺘﺤﺎت‬

‫ﻣﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج‬
‫اﻝﻠﻮﺣﺔ اﻝﺨﻠﻔﻴﺔ‬

‫ﺣﺠﻢ اﻝﻠﻮﺣﺔ‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻝﺘﺸﻐﻴﻞ‬

‫‪57‬‬

‫‪ 220‬ﻣﻢ )ﻋﺮض( ‪ 305 X‬ﻣﻢ )ارﺕﻔﺎع(‬

‫‪Windows 2000 / XP / VISTA‬‬

‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻝﺔ اﻝﺪﻋﻢ ﻷي ﻥﻈﺎم ﺕﺸﻐﻴﻞ ﺏﺈﺧﻄﺎر ‪Biostar‬ﺕﺤﺘﻔﻆ‬

‫أو ﺏﺪون إﺧﻄﺎر‪.‬‬

Motherboard Manual

JAPANESE
TP45D2-A7

CPU

TP43D2-A7

LGA 775

Intel Core2Duo / Core2Quad /

Pentium Dual-Core / Celeron Dual-Core /

Celeron 4xx processor

Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended

FSB
チップセット

Memory 64 Technology / Virtualization

Technologyをサポートします

800 / 1066 / 1333 / 1600 MHz

Intel P45

Intel P43

Intel ICH10

DDR2 DIMMスロット x 4

各DIMMは 256MB / 512MB / 1GB / 2GB DDR2を 各DIMMは 256MB / 512MB / 1GB / 2GB DDR2を
サポート
メインメモリ 最大メモリ容量8GB

サポート
最大メモリ容量8GB

デュアル チャンネルモードDDR2メモリモジュール

DDR2 1066 / 800 / 667をサポート

登録済みDIMMとECC DIMMはサポートされません

ITE 8718F

もっとも一般に使用されるレガシーSuper I/O機能を もっとも一般に使用されるレガシーSuper I/O機能を

Super I/O

IDE

SATA

LAN

採用しています。

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITEの「スマートガーディアン」機能

JMicro JMB368

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

PIO Mode 0~4のサポート、

統合シリアルATAコントローラ

最高3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

Realtek RTL 8111C

10 / 100 / 1000 Mb/秒のオートネゴシエーション

半/全二重機能

TP45D2-A7/TP43D2-A7
TP45D2-A7
HDオーディ
オのサポート

スロット

ALC662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PCIスロット

PCI Express x16 Gen2スロット

PCI Express x 1スロット

フロッピーコネクタ

プリンタポートコネクタ

シリアルポート

IDEコネクタ

SATAコネクタ

フロントパネルコネクタ

フロントオーディオコネクタ

CDインコネクタ

CPUファンヘッダ

システムファンヘッダ

CMOSクリアヘッダ

USBコネクタ

フロントパネルコネクタ
オンボードコ フロントオーディオコネクタ
ネクタ

背面パネル
I/O

TP43D2-A7

ALC662

電源コネクタ(24ピン)

電源コネクタ(4ピン)

PS/2キーボード

PS/2マウス

LANポート

USBポート

オーディオジャック

ボードサイズ 220 mm (幅) X 305 mm (高さ)
Windows 2000 / XP / VISTA

220 mm (幅) X 305 mm (高さ)
Windows 2000 / XP / VISTA

OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。

たは削除する権利を留保します。

2008/05/07

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2008:05:07 17:36:46+08:00
Modify Date                     : 2008:05:07 17:36:46+08:00
Page Count                      : 61
Creation Date                   : 2008:05:07 09:36:46Z
Mod Date                        : 2008:05:07 09:36:46Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 95038
Metadata Date                   : 2008:05:07 09:36:46Z
Creator                         : 95038
Title                           : Microsoft Word - IP45A-A7T_IP43A-A7T_080507.doc

EXIF Metadata provided by EXIF.tools

Biostar Tp43D2 A7 Owners Manual IP45A A7T_IP43A A7T_080507

Navigation menu

Versions of this User Manual:

Views

Navigation