Biostar Tpower X58 Owners Manual IX58A AXP_IX58B AXP_090806

2014-07-31

: Biostar Biostar-Tpower-X58-Owners-Manual biostar-tpower-x58-owners-manual biostar pdf

Open the PDF directly: View PDF .
Page Count: 69

Download
Open PDF In Browser	View PDF

TPower X58/TPower X58 A Set up M anu al

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5

Before You Start......................................................................................... 1
Package Checklist ..................................................................................... 1
Motherboard Features.............................................................................. 2
Rear Panel Connectors.............................................................................. 3
Motherboard Layout................................................................................. 4

2.1
2.2
2.3
2.4

Installing Central Processing Unit (CPU) ............................................... 5
FAN Headers.............................................................................................. 7
Installing System Memory ........................................................................ 8
Connectors and Slots................................................................................ 10

3.1
3.2

How to Setup Jumpers............................................................................. 13
Detail Settings .......................................................................................... 13

4.1
4.2
4.3

Operating System.................................................................................... 20
Raid Arrays............................................................................................... 20
How RAID Works..................................................................................... 20

5.1
5.2

T-Power BIOS ........................................................................................... 24
T-Power Software .................................................................................... 33

6.1
6.2
6.3
6.4
6.5

Driver Installation Note.......................................................................... 43
Extra Information.................................................................................... 44
AMI BIOS Beep Code ............................................................................... 45
AMI BIOS Post Code................................................................................. 46
Troubleshooting ....................................................................................... 48

Chapter 2: Hardware Installation .......................... 5

Chapter 3: Headers & Jumpers Setup .................. 13
Chapter 4: RAID Functions .................................. 20

Chapter 5: T-Power BIOS & Software .................. 24
Chapter 6: Useful Help ........................................ 43

Appendix: SPEC In Other Languages ................... 50

German.................................................................................................................. 50
French .................................................................................................................... 52
Italian..................................................................................................................... 54
Spanish ................................................................................................................... 56
Portuguese ............................................................................................................ 58
Polish...................................................................................................................... 60
Russian ................................................................................................................... 62
Arabic..................................................................................................................... 64
Japanese ................................................................................................................ 66

TPower X58/TPower X58A

CHAPTER 1: INTRODUCTION
1.1

BEFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

1.2

Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.

PACKAGE CHECKLIST
HDD Cable X 1
Serial ATA Cable X 6 (optional)
Serial ATA Power Cable X 6 (optional)
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

Motherboard Manual

1.3

MOTHERBOARD FEATURES
SPEC
Supports Execute Disable Bit / Enhanced Intel

CPU

SOCKET 1366

SpeedStep® / Intel Architecture-64 / Extended

Intel Core i7 Extreme / Core i7 processor Memory 64 Technology / Virtualization Technology /
Hyper Threading

QPI
Chipset

Support 6.4GT/s
Intel X58
Intel ICH10R
IT8720

Super I/O

Environment Control initiatives,

Provides the most commonly used legacy Hardware Monitor Controller
Super I/O functionality.

Fan Speed Controller

Low Pin Count Interface

ITE's "Smart Guardian" function

DIMM Slots x 6

Dual & Triple Channel Mode DDR3 memory module

Main

Each DIMM supports 512MB / 1GB / 2GB / Supports DDR3 1866(OC) / 1600(OC) / 1333 / 1066 /

Memory

4GB DDR3

800

Max Memory Capicity 24GB

Registered DIMM and ECC DIMM is not supported

IDE

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

JMB363

supports PIO Mode 0~4
Data transfer rates up to 3 Gb/s.

SATA II

ICH10R

SATA Version 2.0 specification compliant.
RAID 0 / 1 / 5 / 10 support
Data transfer rates up to 3 Gb/s.

eSATA

JMB363

SATA Version 2.0 specification compliant.
Port-Multiplier/RAID 0,1 support

LAN
Sound
Codec
IEEE 1394

Slots

Realtek RTL 8111C x2 (TPower X58)

10 / 100 Mb/s / 1Gb/s auto negotiation

Realtek RTL 8111C x1 (TPower X58A)

Half / Full duplex capability
7.1 channels audio out

ALC888S

High Definition Audio

Ti tsb43ab22a (TPower X58)
PCI slot

Supports PCI expansion cards

PCI Express Gen2 x16 slot (x16)

Supports PCI-E Gen2 x16 expansion cards

PCI Express Gen2 x16 slot (x4)

Supports PCI-E Gen2 x16 expansion cards

PCI Express x1 slot

Supports PCI-E x1 expansion cards

On Board

Floppy Connector

Each connector supports 2 Floppy drives

Connector

IDE Connector

Each connector supports 2 IDE device

SATA Connector

Each connector supports 1 SATA devices

Front Panel Connector

Supports front panel facilities

TPower X58/TPower X58A
SPEC
Front Audio Connector

Back Panel
I/O

Board Size

CD-in Connector

Supports CD audio-in function

S/PDIF out Connector

Supports digital audio out function

CPU Fan Header

CPU Fan power supply (with Smart Fan function)

System Fan Header

System Fan Power supply

Clear CMOS Header

Restore CMOS data to factory default

USB Connector

Each connector supports 2 front panel USB ports

IEEE 1394 Connector (TPower X58) x1

Connects to IEEE 1394 device

Power Connector (24pin)

Connects to Power supply

Power Connector (8pin)

Connects to Power supply

Power Connector (4pin)

Connects to Power supply

PS/2 Keyboard

Connects to PS/2 Keyboard

LAN Port

Connect to RJ-45 ethernet cable

USB Port

Connect to USB devices

Audio Jack

Provide Audio-In/Out and microphone connection

eSATA Port

Connect to SATA devices

1394 Port (TPower X58)

Connects to IEEE 1394 device

Optical +coaxial S/PDIF Out

Provides digital audio out function

244 (W) x 305 (L) mm

ATX

OS Support Windows XP / Vista 32 / Vista 64

1.4

Supports front panel audio function

Biostar reserves the right to add or remove support for
any OS with or without notice

REAR PANEL CONNECTORS
(TPower X58)
LAN

PS/2 ( TPower X58)
Keyboard
IEEE 1394

USBX2

USBX2
USBX2 ESATAX2 Optical
+coaxial
S/PDIF Out
Center

LAN

USBX2

Line In

Rear

Line Out

Side

Mic I n

Motherboard Manual

1.5

MOTHERBOARD LAYOUT
JUSBKB1
IDE

J1394_US1

JATXPWR1

JFSPDIF1

CPU1

D DR 3 _C 2

D DR 3 _C 1

D DR 3 _B2

D DR 3 _B1

D DR 3 _A2

D DR 3 _A1

ID E1

ES ATAX1

Socket 1366

JUSBLAN1
DDR_V_D2
DDR_V_D1

JUSBLAN2

JAUDIOF1

JAUDIO1

JCFAN1

Intel
X58

(TPo wer X58 )
JATXPWR3

JATXPWR2

JSFAN1

LAN

BIOS
JCMOS1

PEX16_1

NB_V_ D1
NB_V_ D2

PCI1

SATA1

Intel
ICH10R

PEX1_1
LAN

BAT1

SATA2

PEX16_2

CODEC

Super
I/O

PCI2
JSPDIF_OUT1

P H _LE D 1
P H _LE D 2
P H _LE D 3
P H _LE D 4
P H _LE D 5
P H _LE D 6

JCDIN1

SATA3

PEX4_1
(TPower X5 8)
FDD1

RSTSW1

J1394_1
JUSB1

Note: ■ represents the 1st pin.

JUSB2

JSFAN2

PWRSW1

JPANEL1

TPower X58/TPower X58A

CHAPTER 2: HARDWARE INSTALLATION
2.1

INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.

Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.

TPower X58/TPower X58A

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

JCFAN1: CPU Fan Header
Pin
1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control

JSFAN1: NorthBridge Fan Header
JSFAN2: System Fan Header

JSFAN1

1
2
3

Assignment
Ground
+12V
FAN RPM rate
sense

JSFAN2
Note:
The JSFAN1/JSFAN2 support 3-pin head connectors, and the JCFAN1, 4-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

Motherboard Manual

2.3

INSTALLING SYSTEM MEMORY

DD R3_C2

DD R3_B2

DD R3_A1
DD R3_A2

A. Memory Modules

Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

TPower X58/TPower X58A

B. Memory Capacity
DIMM Socket
Location

DDR3 Module

Total Memory Size

DDR3_A1

256MB/512MB/1GB/2GB / 4GB

DDR3_A2

256MB/512MB/1GB/2GB / 4GB

DDR3_B1

256MB/512MB/1GB/2GB / 4GB

DDR3_B2

256MB/512MB/1GB/2GB / 4GB

DDR3_C1

256MB/512MB/1GB/2GB / 4GB

DDR3_C2

256MB/512MB/1GB/2GB / 4GB

Max is 24GB.

C. Triple Channel Memory installation
Triple Channel function will be activated as the following table shows:
(O means memory installed; X, not installed.)
Triple Channel DDR3
DDR3
DDR3
A1
Status
A2
B1
Enabled

DDR3
B2

DDR3
C1

DDR3
C2

Enabled
O
O
O
O
O
O
The DRAM bus width of the memory module must be the same (x8 or x16)
Attention: Memory module must be installed in one of DDR3 channel _2 slots
(DDR3_A2, DDR3_B2, DDR3_C2) to boot the system.

Motherboard Manual

2.4

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.

IDE1: IDE/ATAPI Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
The IDE connector can connect a master and a slave drive, so you can connect
up to two devices.

TPower X58/TPower X58A

SATA1~SATA3: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

SATA3

SATA2

SATA1

PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PC I1
PCI2

Motherboard Manual

PEX16_1 & PEX16_2: PCI-Express Gen2 x16 (x16/CrossFire x16,
SLI x16 Speed) Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PEX16_1 & PEX16_2 slots are reserved for graphic or video cards. The
design of this motherboard supports dual PCI-Express graphics cards using
CrossFire technology with multiple displays. When CrossFire and SLI is
activated, these slots run with x16 speed.

PEX4_1: PCI-Express Gen2 x4 Slot
-

PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 1GB/s simultaneously per
direction, for an aggregate of 2GB/s totally.
Some VGA cards may not work on this slot.

PEX1_1: PCI-Express x1 Slots
-

PCI-Express 1.0a compliant.
Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth over the traditional PCI architecture.

PEX16_ 1
PEX1_1
PEX1 6_2
PEX4 _1

TPower X58/TPower X58A

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1

HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened

3.2

Pin closed

Pin1-2 closed

DETAIL SETTINGS

JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

PWR_LED
On/Off
++ -

9
1

+ SPK

Pin
1
2
3
4
5
6
7
8

Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control

Function
Speaker
Connector
Hard drive
LED
Reset button

Pin
9
10
11
12
13
14
15
16

16
8

RST
HLED

Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground

Function
N/A
N/A
Power LED
Power-on button

Motherboard Manual

JATXPWR2: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin
13
14
15
16
17
18
19
20
21
22
23
24

Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground

Pin
1
2
3
4
5
6
7
8
9
10
11
12

Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V

JATXPWR1: ATX Power Source Connector
This connector provides +12V to CPU power circuit.
5

Pin
1
2
3
4
5
6
7
8

Assignment
+12V
+12V
+12V
+12V
Ground
Ground
Ground
Ground

Note:
Before power on the system, please make sure that both JATXPWR1 and JATXPWR2
connectors have been plugged-in.
If the CPU power plug is 4-pin, please plug it into Pin 1-2-5-6 of JATXPWR1.
14

TPower X58/TPower X58A

JATXPWR3: Auxiliary Power for Graphics
This connector is an auxiliary power connection for graphics cards. Exclusive
power for the graphics card provides better graphics performance.

Assignment

1
2
3
4

+12V
Ground
Ground
VCC

JUSB1/JUSB2: Headers for USB 2.0 Ports at Front Panel
Theses headers allow user to connect additional USB cable on the PC front
panel. They also can be connected with internal USB devices, like USB card
reader.

J US B1 JU SB2
2

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC

Motherboard Manual

JAUDIOF1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense

JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the different
devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Pin
1
2
3
4

Assignment
Left Channel Input
Ground
Ground
Right Channel Input

TPower X58/TPower X58A

JSPDIF_OUT1: Digital Audio-out Connectors
JSPDIF_OUT1 is for connecting the PCI bracket SPDIF output.

Pin
1
2
3

Assignment
+5V
SPDIF_OUT
Ground

JSPDIF_OUT1

On-Board Buttons
There are 2 on-board buttons.

RSTSW1PWRSW1

PWRSW1:
This is an on-board Power Switch button.
RSTSW1:
This is an on-board Reset button.

Motherboard Manual

JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

3
1

Pin 1-2 Close:
Normal Operation (default).

3
1

Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.

Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.

BIOS POST Code
This indicator will show POST code while booting.
for all the BIOS POST codes.

Please refer to Chapter 6.4

TPower X58/TPower X58A

J1394_1: IEEE 1394 Header (TPower X58)
This header allows user to connect IEEE 1394 device.

Pin
1
2
3
4
5
6
7
8
9
10

Assignment
TPA1+
TPA1GND
GND
TPB1+
TPB1VCC
VCC
N/A
KEY

On-Board LED Indicators
There are 10 LED indicators on the motherboard showing system status.

DDR_V_D2
DDR_V_D1

PH _LED 1
PH _LED 2
PH _LED 3
PH _LED 4
PH _LED 5
PH _LED 6

NB_V_D1
NB_V_D2

DDR_V_D1 & DDR_V_D2: DDR Power Status Indicators
NB_V_D1 & NB_V_D2: NorthBridge Power Status Indicators
PH_LED1 ~ PH_LED6: CPU Power Status Indicators
Please refer to the tables below for different messages:
LED
ON
OFF

Phase Indicator
Phase Active
Phase Disable

Note:
When power saving mode is activated, only one of DDR, of NB, and of CPU
LEDs will light.
19

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS
4.1

OPERATING SYSTEM

Supports Windows XP / Vista 32 / Vista 64.

4.2

RAID ARRAYS

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 1+0 (Onboard): RAID 1+0 combines the techniques used in RAID 0 and RAID 1.
RAID 5 (Onboard): RAID 5 provides fault tolerance and better utilization of disk capacity.

4.3

HOW RAID WORKS

RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

TPower X58/TPower X58A

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.

Features and Benefits

Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.

Block 1
Block 2
Block 3

Motherboard Manual

RAID 1+0 (For Onboard SATA Only):
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0
solution for improved resiliency, performance and rebuild performance.

Features and Benefits

Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

TPower X58/TPower X58A

RAID 5 (For Onboard SATA Only):
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.

Features and Benefits

Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.

Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY

Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11

Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12

Motherboard Manual

CHAPTER 5: T-POWER BIOS & SOFTWARE
5.1

T-POWER BIOS
T-Power BIOS Features
Overclocking Navigator Engine (O.N.E.)
Memory Integration Test (M.I.T., under Overclock Navigator Engine)
BIO-Flasher: Update BIOS file from USB Flash Drive or FDD
Self Recovery System (S.R.S)
Smart Fan Function
CMOS Reloading Program

!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described below in
this manual is for your reference only and the actual BIOS
information and settings on board may be different from this
manual. For further information of setting up the BIOS, please
refer to the BIOS Manual in the Setup CD.

A. Overclocking Navigator Engine (O.N.E.)
ONE provides two powerful overclocking engines: MOS and AOS for both
Elite and Casual overclockers.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Over-Clocking Navigator Setting
Over-Clocking Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

O.N.E

Exit
Options

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

TPower X58/TPower X58A

Manual Overclock System (M.O.S.)
MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Over-Clocking Navigator Setting
Over-Clocking Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
: Options
Intel(R) SpeedStep(tm) tech Normal
[Enabled]
Automate
Ratio CMOS Setting
[24] OverClock
Manual
OverClock
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

Exit
Options

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

↓
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Over-Clocking Navigator Setting
Over-Clocking Navigator
[Manual OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

O.N.E

Exit
Options

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Intel(R) SpeedStep(tm) Tech
This item allows you to enable SpeedStep technology for better power
saving. SpeedStep is a technology built into some Intel processors that
allows the clock speed of the processor to be dynamically changed by
software.

Ratio CMOS Setting
This item allows you to set the CPU ratio frequency. This item is
adjustable only when SpeedStep Tech is set to Disabled.

CPU Frequency Setting
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
25

Motherboard Manual
QPI Links Speed
This item allows you to set the QPI links to full-speed or leave them in
slow-mode..

QPI Frequency
This item allows you to select the QPI Frequency.

Uncore Frequency
This item allows you to select Uncore Frequency.

DRAM Frequency
This item allows you to control the Memory Clock.

Command Rate
This item allows you to select DRAM command rate.

Intel PPM/Turbo Mode Configuration
Enter this item for more advanced Intel PPM/Turbo settings.

DRAM Timing Configuration
Enter this item for more advanced DRAM timing settings.

Clock Gen Configuration
Enter this item for more advanced Clock Gen settings.

Voltage Control
Enter this item for more advanced voltage settings.

NOTE
Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.

TPower X58/TPower X58A

Automatic Overclock System (A.O.S.)
For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single step.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Exit

Over-Clocking Navigator Setting

Options

Over-Clocking Navigator
[Normal]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
: Options
Intel(R) SpeedStep(tm) tech Normal
[Enabled]
Automate
Ratio CMOS Setting
[24] OverClock
Manual
OverClock
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

Normal
Automate OverClock
Manual OverClock

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

V6 Tech Engine
This engine will make a good over-clock performance.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Over-Clocking Navigator Setting
Over-Clocking Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

Exit
Options

V6-Tech Engine
V8-Tech Engine
V12-Tech Engine

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Motherboard Manual
V8 Tech Engine
This engine will make a better over-clock performance.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Exit

Over-Clocking Navigator Setting

Options

Over-Clocking Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V8-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

V6-Tech Engine
V8-Tech Engine
V12-Tech Engine

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

V12 Tech Engine
This engine will make a best over-clock performance.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Over-Clocking Navigator Setting
Over-Clocking Navigator
[Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System
[V12-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[Auto]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuration
> DRAM Timing Configuration

Exit
Options

V6-Tech Engine
V8-Tech Engine
V12-Tech Engine

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Notices:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.

TPower X58/TPower X58A

B. Memory Integration Test (M.I.T.)
This function is under “Overclocking Navigator Engine” item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is “Disabled”; the condition parameter should
be changed to “Enable” to proceed this test.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[4.800GT]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuraiton
> DRAM Timing Configuration
Configuration
> Clock Gen
> Voltage Control
Memory Test
[Disabled]

O.N.E

Exit
Options

Disabled
Enabled

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

↓
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

=========== Automate OverClock System ===========
Auto OverClock System
[V6-Tech Engine]
============ Manual OverClock System ============
Current QPI Frequency
:
Current Memory Frequency
:
Current Uncore Frequency
:
Intel(R) SpeedStep(tm) tech
[Enabled]
Ratio CMOS Setting
[24]
CPU Frequency Setting
[133]
QPI Links Speed
[Full-Speed]
QPI Frequency
[4.800GT]
Uncore Frequency
[Auto]
DRAM Frequency
[Auto]
Command Rate
[Auto]
> Intel PPM/Turbo Mode Configuraiton
> DRAM Timing Configuration
> Clock Gen
Configuration
> Voltage Control
Memory Test
[Enabled]

O.N.E

Exit
Options

Disabled
Enabled

Select Screen
Select Item
EnterGo to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from “Enable” to “Disable”
to complete the test.

Motherboard Manual

C. BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press to enter the utility.

5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press
then to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press to proceed. BIOS update completes.

z
z

This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

TPower X58/TPower X58A

D. Self Recovery System (S.R.S.)
This function can’t be seen under BIOS setup; and is always on whenever the
system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default BIOS
setting, and all overclock settings will be re-configured.

E. Smart Fan Function
Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

Advanced Settings

O.N.E

Exit

Configure CPU.

WARNING: Setting wrong values in below sections
may cause system to malfunction.
>
>
>
>
>
>
>
>
>

CPU Configuration
SuperIO Configuration
Hardware Health Configuration
Smart Fan Configuration
USB Configuration
PM/ACPI Configuration
Onboard PCI/PCI-E Devices Configuration
Event Log Configuration
Intel VT-d Configuration

Select Screen
Select Item
EnterGo to Sub Screen
General Help
F1
F10 Save and Exit
ESC Exit

↓
Advanced

BIOS SETUP UTILITY

Smart Fan Configuration
CPU Smart Fan
Smart Fan Calibration
Control Mode
Fan Ctrl OFF(oC)
Fan Ctrl On(oC)
Fan Ctrl Start value
Fan Ctrl Sensitive

[Disabled]

When you choice [Auto]
, please run the
calibration to define
the Fan parameters for
Smart Fan control

+F1
F10
ESC

Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit

Motherboard Manual
Smart Fan Calibration
Choose this item and then the BIOS will automatically test and detect the
CPU/System fan functions and show CPU/System fan speed.

Fan Ctrl OFF(℃)
If the CPU/System temperature is lower than the set value, the CPU/
System fan will turn off. The range is from 0~127, with an interval of 1.

Fan Ctrl On(℃)
The CPU/System fan starts to work when CPU/System temperature
arrives to this set value. The range is from 0~127, with an interval of 1.

Fan Ctrl Full On(℃)
If the System Temperature reaches the set value, FAN will run in full speed.
The range is from 0~127, with an interval of 1.

Fan Ctrl Start Value
When CPU/System temperature arrives to the set value, the CPU/System
fan will work under Smart Fan Function mode. The range is from 0~127,
with an interval of 1.

F. CMOS Reloading Program
It allows users to save different CMOS settings into BIOS-ROM.
Users are able to reload any saved CMOS setting for customizing system
configurations. Moreover, users are able to save an ideal overclock setting
during overclock operation.
There are 10 sets of record addresses in total, and users are able to name the
CMOS data according to personal preference.
Main

Advanced

PCIPnP

BIOS SETUP UTILITY
Boot
Chipset

O.N.E

Exit

Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Security Settings

CMOS Backup Func
CMOS Data Reload
CMOS Data Save

> Security
CMOS Backup Function

Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit

TPower X58/TPower X58A

5.2

T-POWER SOFTWARE

T-Power2 is an integration of four functions: OC Tweaker for over-clock,
eHot-Line for technical support, BIOS-watch for system monitor, and Biostar
Flash for BIOS update.

Installing T-Power2
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on T-Power2.
3. Follow the on-screen instructions to complete the installation.

Launching T-Power2
After the installation process, you will see a “TPower2” icon
appears on the desktop. Double-click the TPower2 icon to
launch T-Power2 utility.

Main Panel
The main panel provides OC Tweaker, eHot-Line, BIO-watch, and Biostar
Flash buttons for launching the respective programs. Besides you can also
change the skin of the main panel.
Thi s area shows the inf ormati on
of the pointed butt on

Change Skin

Program OFF

OC Tweaker
BIO-watch

eHOT-Li ne
Biostar Fl ash

Motherboard Manual

OC Tweaker
On the main panel, you can click on the OC Tweaker button to launch this
function. The OC Tweaker provides automatic/manual over-clock function for
BIOSTAR motherboard, and even for some BIOSTAR VGA card (VR8xxx
series only) which is powered by V-Ranger.
Th is a rea shows clo ck
infor matio n of th e VGA card

Th is a rea shows clo ck/vol ta ge
infor matio n of th e CPU/motherb oard

V3/V6/V9/V12 /V1 5
Fi xe d mod e ove r-clock

Te st the system

Auto over- cl ock

Man ual Adju st

De lete curre nt
se tti ng file
Save curren t
se tti ng into fil e

Re store hardware
defaul t setting
Load p reviously
sa ve d settin g fi le

If you are not using a
nVIDI A VGA ca rd, this
windo w w ill not show.

Tes t the VGA card

Power Saving M ode

Manual over-cloc k

Save current
VGA s etting into file

Restore VGA card
default setting

D elete current
VGA s etting file

Load prev ious saved
VGA setting file

If your have installed a
V-Ranger powered BIOSTAR
VGA card, then the left
window of the VGA card
information would show like
this. VGA card over-clock
function will be enabled.

TPower X58/TPower X58A

By this function, the utility will set the best and stable performance and
frequency automatically.
Click on
then a Warning dialog will
show. This dialog tells that all running
applications should be closed before the auto
over-clock procedure. The utility will do a
series of test continually; do not do any
operation during the test procedure. Click OK
to proceed or Cancel to stop.

After proceeding the tests would start, and a
warning message would continually show
telling that do not do any action to interfere
the testing procedure. The testing
procedure takes minutes; you can stop the
procedure by clicking Cancel.

For getting the best performance, the utility will repeat the test continually until the system
hang or fail, and then the system will auto-reboot. After that, launch the T-Power2 and enter
the OC Tweaker again, you will find the setting has been restored to a safest and best
performance status. Save this setting is recommended.

To manually adjust the clock and voltage, just click the
number. (For V-Ranger powered VGA card, click

beside the

then the

beside the VGA values will show.) After the adjustment, click
to verify
the supplied value is recommended. If the test passes, following dialog will
show; click OK to proceed.

Motherboard Manual

E X: This means V9 engine is acti vated.

By clicking
,
the utility would over-clock the system
with certain fixed percentage. When the
V3/V6/V9/V12/V15 engine is activated,
you will see the green light bar on the left
rising to the top of the button.
This function is recommended for
any inexperienced users.

You can save current setting to a file by clicking
will show.

, then a dialog as bellow

Enter file name and click “Save”, and then the current setting would be saved.
To load a previously saved file, click on
, and the saved files would show
as bellow. Click on the file name and then choose “Yes” to load the setting.

To delete a previously saved file; load the setting first Æ click on
(for VGA
) Æ choose “Yes”, and the setting file will be deleted.
setting is
(Be aware of that VGA setting for V-Ranger powered VGA card must be
saved/loaded/deleted respectively.)
Over-clock is an optional process but not a “must-do” process, and actual over-clock
result varies by every individual PC system. Therefore, we will neither guarantee any
over-clock performance nor be responsible for any system damage that may be caused
by over-clock. Any values or performance shown above are for reference only.
36

TPower X58/TPower X58A

BIO-watch
BIO-watch is a control and monitor utility that helps you to maintain the health
of the PC. It provides real-time information of CPU/GPU/System temperature,
fan speed, and voltage; and fan control function.
Th is area sh ows rea l-time i nformation of
tempe ratu re/fan speed/vo ltage

Cu rrent fan speed

Cu rrent CPU/GPU/System tempera tu re
Fa n co ntrol bars

Fa n
ca lib rate

Fa n
auto-control
ON/OFF

Fa n
co ntrol setti ng

Hi de
this utili ty

At the very first time entering this utility,
fan calibrate will be made automatically.
After that you can also click
manually calibrate the fan.

When the “AUTO” button looks like
auto-control.
speed.

Click the button to

, it means fans are under
then you can manually adjust fan
37

Motherboard Manual

Increase Speed

Auto-Control
OFF
Decrease Speed

Click the auto-control off and then the adjust level will show; use the level to
increase/decrease the fan speed. Be aware if the fan level been down to 0%,
the fan will still not completely stop; this is for your system’s protection.

Click
to enter the fan control
setting dialog. Here you can set CPU
temperature to control the fan; including
target CPU temperature, CPU
temperature for full fan speed, and CPU
temperature for shutdown system.
Besides, you can also see system
information in this dialog.

TPower X58/TPower X58A

eHot-Line
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.

The main panel of eHot-Line shows
BIOS information, motherboard model
name, and chipset information, click on
“SETTING” to enter.

The Privacy Statement shows; and
please read through it. If you agree
with the statement, click “Yes” to
proceed; If not, click “No” to leave.

After agreeing with the privacy statement, fill up the table in the following dialog.
represents impor tant
infor mation that you
must provide. Without
this information, you may
not be able to send out
the mail.

be conditi on
*Descri
of your system.

ect your area or
*Sel
the area close to you.
Pr ovide the e-mail
addr ess that you would
like to send the copy to.

This block will show
the information which
would be collected in
the mail .

the name of
*Provide
the memory module
manufacturer.

Provide the name of
the power supply
manufactur er and the
model no.

Exit this dialog.

Send the mail out.

Save these infor mation to a .txt file

Motherboard Manual

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

TPower X58/TPower X58A

Biostar Flash
Biostar Flash is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

Shows curr ent BIOS
infor mati on

Restart Your System
(AMI BIOS)
Clear CMOS function
(Award BIOS)
Update BIOS
with a B IOS fil e

Save current BIOS
to a .bi n file

Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.
41

Motherboard Manual

Before doing this, please download the proper BIOS file from our website:
www.biostar.com.tw
Update BIOS procedure should be run with
Clear CMOS (or Restart) function, so please
check on Clear CMOS (or Restart) first.

(Restart Your System)

Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press
key to enter BIOS setup.

In the BIOS setup, choose Load Optimized Defaults and press
ÆÆ. After that use Save and Exit Setup to exit BIOS setup.
BIOS Update is completed.

All the information and content above about the T-Power 2 utility are subject to be
changed without notice. For better performance, the utility is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this
manual.
42

TPower X58/TPower X58A

CHAPTER 6: USEFUL HELP
6.1

DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
43

Motherboard Manual

6.2

EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

TPower X58/TPower X58A

6.3

AMI BIOS BEEP CODE

Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13

Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)

POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8

Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3

6, 7

Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
45

Motherboard Manual

6.4

AMI BIOS POST CODE

Checkpoint
03

05
06
07
08
C0
C1
C2
C5
C6
C7
0A
0B
0C

13
20
24
2A
2C
2E
31
33
46

Description
Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS,
POST, Runtime data area. Also initialize BIOS modules on POST entry and
GPNV area. Initialized CMOS as mentioned in the Kernel Variable
"wCMOSFlags."
Check CMOS diagnostic byte to determine if battery power is OK and
CMOS checksum is OK. Verify CMOS checksum manually by reading
storage area. If the CMOS checksum is bad, update CMOS with power-on
default values and clear passwords. Initialize status register A.
Initializes data variables that are based on CMOS setup questions.
Initializes both the 8259 compatible PICs in the system
Initializes the interrupt controlling hardware (generally PIC) and interrupt
vector table.
Do R/W test to CH-2 count reg. Initialize CH-0 as system timer. Install the
POSTINT1Ch handler. Enable IRQ-0 in PIC for system timer interrupt.
Traps INT1Ch vector to "POSTINT1ChHandlerBlock."
Fixes CPU POST interface calling pointer.
Initializes the CPU. The BAT test is being done on KBC. Program the
keyboard controller command byte is being done after Auto detection of
KB/MS using AMI KB-5.
Early CPU Init Start -- Disable Cache – Init Local APIC.
Set up boot strap processor Information.
Set up boot strap processor for POST.
Enumerate and set up application processors.
Re-enable cache for boot strap processor.
Early CPU Init Exit.
Initializes the 8042 compatible Key Board Controller.
Detects the presence of PS/2 mouse.
Detects the presence of Keyboard in KBC port.
Testing and initialization of different Input Devices. Also, update the Kernel
Variables.
Traps the INT09h vector, so that the POST INT09h handler gets control for
IRQ1. Uncompress all available language, BIOS logo, and Silent logo
modules.
Early POST initialization of chipset registers.
Relocate System Management Interrupt vector for all CPU in the system.
Uncompress and initialize any platform specific BIOS modules. GPNV is
initialized at this checkpoint.
Initializes different devices through DIM.
See DIM Code Checkpoints section of document for more information.
Initializes different devices. Detects and initializes the video adapter
installed in the system that have optional ROMs.
Initializes all the output devices.
Allocate memory for ADM module and uncompress it. Give control to ADM
module for initialization. Initialize language and font modules for ADM.
Activate ADM module.
Initializes the silent boot module. Set the window for displaying text
information.

TPower X58/TPower X58A
Checkpoint
37
38
39
3A
3B
3C
40

52
60
75
78
7C
84
85
87
8C
8D
8E
90
A1
A2
A4
A7
A9
AA
AB
AC
B1
00

Description
Displaying sign-on message, CPU information, setup key message, and any
OEM specific information.
Initializes different devices through DIM. See DIM Code Checkpoints section
of document for more information. USB controllers are initialized at this
point.
Initializes DMAC-1 & DMAC-2.
Initialize RTC date/time.
Test for total memory installed in the system. Also, Check for DEL or ESC
keys to limit memory test. Display total memory in the system.
Mid POST initialization of chipset registers.
Detect different devices (Parallel ports, serial ports, and coprocessor in
CPU, etc.) successfully installed in the system and update the BDA,
EBDA…etc.
Updates CMOS memory size from memory found in memory test. Allocates
memory for Extended BIOS Data Area from base memory. Programming the
memory hole or any kind of implementation that needs an adjustment in
system RAM size if needed.
Initializes NUM-LOCK status and programs the KBD typematic rate.
Initialize Int-13 and prepare for IPL detection.
Initializes IPL devices controlled by BIOS and option ROMs.
Generate and write contents of ESCD in NVRam.
Log errors encountered during POST.
Display errors to the user and gets the user response for error.
Execute BIOS setup if needed / requested. Check boot password if installed.
Late POST initialization of chipset registers.
Build ACPI tables (if ACPI is supported).
Program the peripheral parameters. Enable/Disable NMI as selected.
Initialization of system management interrupt by invoking all handlers.
Please note this checkpoint comes right after checkpoint 20h.
Clean-up work needed before booting to OS.
Takes care of runtime image preparation for different BIOS modules. Fill the
free area in F000h segment with 0FFh. Initializes the Microsoft IRQ Routing
Table. Prepares the runtime language module. Disables the system
configuration display if needed.
Initialize runtime language module. Display boot option popup menu.
Displays the system configuration screen if enabled. Initialize the CPU’s
before boot, which includes the programming of the MTRR’s.
Wait for user input at config display if needed.
Uninstall POST INT1Ch vector and INT09h vector.
Prepare BBS for Int 19 boot. Init MP tables.
End of POST initialization of chipset registers. De-initializes the ADM
module.
Save system context for ACPI. Prepare CPU for OS boot including final
MTRR values.
Passes control to OS Loader (typically INT19h).

Motherboard Manual

6.5

TROUBLESHOOTING
Problems

There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.

Solutions
1.
2.
3.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure
correct information is in setup.

System cannot boot after user installs a 1.
second hard drive.
2.

Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.

Back up data and applications
files.
Reformat the hard drive.
Re-install applications and data
using backup disks.

Set master/slave jumpers
correctly.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

TPower X58/TPower X58A

This page is intentionally left blank.

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Unterstützt Execute Disable Bit / Enhanced Intel
CPU

SOCKET 1366

SpeedStep® / Intel Architecture-64 / Extended

Intel Core i7 Extreme / Core i7 Prozessoren Memory 64 Technology / Virtualization Technology /
Hyper Threading

QPI
Chipsatz

6.4GT/s
Intel X58
Intel ICH10R
IT8720

Super E/A

Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.

Lüfterdrehzahl-Controller/-Überwachung

Low Pin Count-Schnittstelle

"Smart Guardian"-Funktion von ITE
Dual & Dreier Kanal DDR3 Speichermodul

DDR3 DIMM-Steckplätze x 6
Arbeitsspeich Jeder DIMM unterstützt 512MB / 1GB / 2GB
er

/ 4GB DDR3.

JMB363

SATA II

ICH10R

1066 / 800
registrierte DIMMs. ECC DIMMs werden nicht

Max. 24GB Arbeitsspeicher

IDE

Unterstützt DDR3 1866(OC) / 1600(OC) / 1333 /

unterstützt.
Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus
Unterstützt PIO-Modus 0~4,
Datentransferrate bis zu 3Gb/s
Konform mit der SATA-Spezifikation Version 2.0.
Unterstützt RAID 0 / 1 / 5 / 1+0
Datentransferrate bis zu 3Gb/s

eSATA

JMB363

Konform mit der SATA-Spezifikation Version 2.0.
Unterstützt Port-Multiplier/RAID 0,1

LAN

Realtek RTL 8111C x2 (TPower X58)

10 / 100 / 1000 Mb/s Auto-Negotiation

Realtek RTL 8111C x1 (TPower X58A)

Halb-/ Vollduplex-Funktion

Unterstützt High-Definition Audio

Audio-Unters ALC888S

7.1-Kanal-Audioausgabe

tützung
IEEE 1394
Steckplätze

Ti tsb43ab22a (TPower X58)
PCI-Steckplatz

PCI Express Gen2 x16 Steckplatz
(x16)

TPower X58/TPower X58A
Spezifikationen
PCI Express Gen2 x16 Steckplatz
(x4)

PCI Express x1 Steckplatz

Diskettenlaufwerkanschluss

Jeder Anschluss unterstützt 2 Diskettenlaufwerke

IDE-Anschluss

Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss

Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss

Unterstützt die Fronttafel-Audioanschlussfunktion

CD-IN-Anschluss

Unterstützt die CD Audio-In-Funktion

S/PDIF Ausgangsanschluss

Unterstützt die digitale Audioausgabefunktion

Onboard-Ans CPU-Lüfter-Sockel
chluss

Rückseiten-E
/A

System-Lüfter-Sockel

"CMOS löschen"-Sockel

USB-Anschluss

IEEE 1394-Anschluss (TPower X58)

Stromanschluss (24-polig)

Stromanschluss (8-polig)

Stromanschluss (4-polig)

PS/2-Tastatur

LAN-Anschluss

USB-Anschluss

Audioanschluss

eSATA Anschluss

1394-Anschluss (TPower X58)

Optisches +coaxial S/PDIF heraus

Platinengröße 244 mm (B) X 305 mm (L)
OS-Unterstüt
zung

CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss

Jeder Anschluss unterstützt 2
Fronttafel-USB-Anschlüsse

ATX
Biostar behält sich das Recht vor, ohne Ankündigung

Windows XP / Vista 32 / Vista 64

die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.

Motherboard Manual

FRENCH
SPEC
Prend en charge les technologies d'exécution de bit de

SOCKET 1366
UC

désactivation / Intel SpeedStep® optimisée/

Processeurs Intel Core i7 Extreme /

d'architecture Intel 64 / de mémoire étendue 64 / de

Core i7
QPI
Chipset

Super E/S

virtualisation / Hyper Threading

6.4GT/s
Intel X58
Intel ICH10R
IT8720

Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S

Moniteur de matériel

patrimoniales la plus utilisée.

Contrôleur /moniteur de vitesse de ventilateur

Interface à faible compte de broches

Fonction "Gardien intelligent" de l'ITE
Module de mémoire DDR3 à mode à double & triple

Fentes DDR3 DIMM x 6

voie

Mémoire

Chaque DIMM prend en charge des DDR3 Prend en charge la DDR3 1866(OC) / 1600(OC) / 1333

principale

de 512Mo / 1Go / 2Go / 4Go

/ 1066 / 800

Capacité mémoire maximale de 24Go

Les DIMM à registres et DIMM avec code correcteurs
d'erreurs ne sont pas prises en charge

IDE

JMB363

SATA II

ICH10R

Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133
Prend en charge le mode PIO 0~4,
Taux de transfert jusqu'à 3 Go/s.
Conforme à la spécification SATA Version 2.0
Prise en charge RAID 0 / 1 / 5 / 1+0
Taux de transfert jusqu'à 3 Go/s.

eSATA

JMB363

Conforme à la spécification SATA Version 2.0
Prise en charge Port-Miltiplier/ RAID 0,1

LAN

Realtek RTL 8111C x2 (TPower X58)

10 / 100 / 1000 Mb/s négociation automatique

Realtek RTL 8111C x1 (TPower X58A)

Half / Full duplex capability

Prise en
charge

Prise en charge de l'audio haute définition

ALC888S

Sortie audio à 7.1 voies

audio HD
IEEE 1394

Ti tsb43ab22a (TPower X58)

Fentes

Fente PCI

Fente PCI Express Gen2 x16
(x16)

TPower X58/TPower X58A
SPEC
Fente PCI Express Gen2 x16
(x4)

Fente PCI Express x1

Connecteur de disquette

Connecteur IDE

Connecteur SATA

Connecteur du panneau avant

Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1

Prend en charge la fonction audio du panneau avant

Connecteur d'entrée CD

Prend en charge la fonction d'entrée audio de CD

Connecteur de sortie S/PDIF

Prend en charge la fonction de sortie audio numérique

Connecteur Embase de ventilateur UC
embarqué

Embase de ventilateur système

Embase d'effacement CMOS

Connecteur USB

Chaque connector prend en charge 2 lecteurs de
disquettes
Chaque connecteur prend en charge 2 périphériques
IDE
Chaque connecteur prend en charge 1 périphérique
SATA

Alimentation électrique du ventilateur UC (avec fonction
de ventilateur intelligent)
Alimentation électrique du ventilateur système

Chaque connecteur prend en charge 2 ports USB de
panneau avant

Connecteur IEEE 1394(TPower X58) x1
Connecteur d'alimentation

(24 broches)
Connecteur d'alimentation

(8 broches)
Connecteur d'alimentation

(4 broches)
Clavier PS/2

Port LAN

E/S du

Port USB

panneau

Fiche audio

arrière

Port eSATA

Port 1394

+coaxial optique sortie S/PDIF

Dimensions
de la carte

244 mm (l) X 305 mm (H)

Support SE Windows XP / Vista 32 / Vista 64

ATX
Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis.

Motherboard Manual

ITALIAN
SPECIFICA
Supporto di Execute Disable Bit / Enhanced

SOCKET 1366
CPU

Intel SpeedStep® / Architettura Intel 64 /

Processore Intel Core i7 Extreme /

Tecnologia Extended Memory 64 / Tecnologia

Core i7
QPI
Chipset

Virtualization / Hyper Threading

6.4GT/s
Intel X58
Intel ICH10R
IT8720

Super I/O

Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super I/O Monitoraggio hardware
usate più comunemente.

Controller / Monitoraggio velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzione "Smart Guardian" di ITE
Modulo di memoria DDR3 a canale doppio &

Alloggi DIMM DDR3 x 6

triplo

Memoria

Ciascun DIMM supporta DDR3 512MB / Supporto di DDR3 1866(OC) / 1600(OC) /

principale

1GB / 2GB / 4GB

1333 / 1066 / 800

Capacità massima della memoria 24GB DIMM registrati e DIMM ECC non sono
supportati
Modalità Bus Master Ultra DMA 33 / 66 / 100 /
IDE

JMB363

133
Supporto modalità PIO Mode 0-4
Velocità di trasferimento dei dati fino a 3 Gb/s.

SATA II

ICH10R

Compatibile specifiche SATA Versione 2.0.
Supporto RAID 0 / 1 / 5 / 1+0
Velocità di trasferimento dei dati fino a 3 Gb/s.

eSATA

JMB363

Compatibile specifiche SATA Versione 2.0.
Supporto Port-Miltiplier/RA ID 0,1

LAN
Supporto
audio HD

Realtek RTL 8111C x2 (TPower X58)

Negoziazione automatica 10 / 100 / 1000 Mb/s

Realtek RTL 8111C x1 (TPower X58A)

Capacità Half / Full Duplex
Supporto audio High-Definition (HD)

ALC888S

Uscita audio 7.1 canali

IEEE 1394 Ti tsb43ab22a (TPower X58)
Alloggi

Alloggio PCI

Alloggio PCI Express Gen2 x16
(x16)

TPower X58/TPower X58A
SPECIFICA
Alloggio PCI Express Gen2 x16

Connettori
su scheda

(x4)

Alloggio PCI Express x1

Connettore floppy

Ciascun connettore supporta 2 unità Floppy

Connettore IDE

Ciascun connettore supporta 2 unità IDE

Connettore SATA

Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale

Supporta i servizi del pannello frontale

Connettore audio frontale

Supporta la funzione audio pannello frontale

Connettore CD-in

Supporta la funzione input audio CD

Connettore output SPDIF

Supporta la funzione d’output audio digitale

Collettore ventolina CPU

Collettore ventolina sistema

Collettore cancellaz ione CMOS

Connettore USB

Alimentazione ventolina CPU (con funzione
Smart Fan)
Alimentazione ventolina di sistema

Ciascun connettore supporta 2 porte USB
pannello frontale

Connettore IEEE 1394 (TPower X58)
x1
Connettore alimentazione

(24 pin)
Connettore alimentazione

(8 pin)
Connettore alimentazione

(4 pin)
Tastiera PS/2

Porta LAN

I/O

Porta USB

pannello

Connettore audio

posteriore Porta eSATA

Dimension
i scheda

+coaxial ottico S/PDIF fuori

244 mm (larghezza) x 305 mm
(altezza)

Sistemi
operativi
supportati

Porta 1394 (TPower X58)

ATX
Biostar si riserva il diritto di aggiungere o

Windows XP / Vista 32 / Vista 64

rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Motherboard Manual

SPANISH
Especificación
Admite Bit de deshabilitación de ejecución / Intel
CPU

SpeedStep® Mejorado / Intel Architecture-64 /

SOCKET 1366

Procesador Intel Core i7 Extreme / Core i7 Tecnología Extended Memory 64 / Tecnología de
virtualización / Hyper Threading

QPI

6.4GT/s

Conjunto de Intel X58
chips

Intel ICH10R
Iniciativas de control de entorno,

IT8720
Súper E/S

Le ofrece las funcionalidades heredadas de Monitor hardware
uso más común Súper E/S.

Controlador/monitor de velocidad de ventilador

Interfaz de cuenta Low Pin

Función "Guardia inteligente" de ITE
Módulo de memoria DDR3 de canal Doble & Triple

Ranuras DIMM DDR3 x 6
Memoria

Cada DIMM admite DDR de 512MB / 1GB /

principal

2GB / 4GB
Capacidad máxima de memoria de 24GB

IDE

JMB363

SATA II

ICH10R

Admite DDR3 de 1866(OC) / 1600(OC) / 1333 / 1066 /
800
No admite DIMM registrados o DIMM compatibles con
ECC
Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2.0.
Admite RAID 0 / 1 / 5 / 1+0
Tasas de transferencia de hasta 3 Gb/s.

eSATA

JMB363

Compatible con la versión SATA 2.0.
Admite Port-Multiplier/RAID 0,1

Red Local
Soporte de
sonido HD

Realtek RTL 8111C x2 (TPower X58)

Negociación de 10 / 100 / 1000 Mb/s

Realtek RTL 8111C x1 (TPower X58A)

Funciones Half / Full dúplex
Soporte de sonido de Alta Definición

ALC888S

IEEE 1394

Ti tsb43ab22a (TPower X58)

Ranuras

Ranura PCI

Salida de sonido de 7.1 canales

Ranura PCI Express Gen2 x16
(x16)

TPower X58/TPower X58A
Especificación
Ranura PCI Express Gen2 x16

Conectores
en placa

(x4)

Ranura PCI Express x1

Conector disco flexible

Cada conector soporta 2 unidades de disco flexible

Conector IDE

Cada conector soporta 2 dispositivos IDE

Conector SATA

Cada conector soporta 1 dispositivos SATA

Conector de panel frontal

Soporta instalaciones en el panel frontal

Conector de sonido frontal

Soporta funciones de sonido en el panel frontal

Conector de entrada de CD

Soporta función de entrada de sonido de CD

Conector de salida S/PDIF

Soporta función de salida de sonido digital

Cabecera de ventilador de CPU

Fuente de alimentación de ventilador de CPU (con
función Smart Fan)

Cabecera de ventilador de sistema X2
Cabecera de borrado de CMOS

Conector USB

Fuente de alimentación de ventilador de sistema

Cada conector soporta 2 puertos USB frontales

Cabecera IEEE 1394 (TPower X58) x1
Conector de alimentación

(24 patillas)
Conector de alimentación

(8 patillas)
Conector de alimentación

(4 patillas)
Teclado PS/2

Puerto de red local

Panel

Puerto USB

trasero de

Conector de sonido

E/S

Puerto eSATA

Tamaño de
la placa

Puerto 1394 (TPower X58)

+coaxial óptico salida S/PDIF

244 mm. (A) X 305 Mm. (H)

Soporte de
sistema
operativo

Windows XP / Vista 32 / Vista 64

ATX

Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.

Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕE

CPU

QPI
Chipset

SOCKET 1366

Suporta as tecnologias Execute Disable Bit / Enhanced

Processador Intel Core i7 Extreme /

Intel SpeedStep® / Intel Arquitecture -64 / Extended

Core i7

Memory 64 / Virtualization / Hyper Threading

6.4GT/s
Intel X58
Intel ICH10R
IT8720

Especificaçã
o Super I/O

Iniciativas para controlo do ambiente

Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.

principal

IDE

Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE

Interface LPC (Low Pin Count).

Memória

Monitorização do hardware

Ranhuras DIMM DDR3 x 6

Módulo de memória DDR3 de canal duplo & triplicar-se

Cada módulo DIMM suporta uma

Suporta módulos DDR3 1866(OC) / 1600(OC) / 1333 /

memória DDR3 de 256 MB / 512 MB / 1GB 1066 / 800
/ 2GB / 4GB

Os módulos DIMM registados e os DIMM ECC não são

Capacidade máxima de memória:8 GB

suportados
Modo Bus master Ultra DMA 33 / 66 / 100 / 133

JMB363

Suporta o modo PIO 0~4,
Velocidades de transmissão de dados até 3 Gb/s.

SATA II

ICH10R

Compatibilidade com a especificação SATA versão 2.0.
Suporta as funções RAID 0 / 1 / 5 / 1+0
Velocidades de transmissão de dados até 3 Gb/s.

eSATA

JMB363

Compatibilidade com a especificação SATA versão 2.0.

Realtek RTL 8111C x2 (TPower X58)

Auto negociação de 10 / 100 / 1000 Mb/s

Realtek RTL 8111C x1 (TPower X58A)

Capacidade semi/full-duplex

Suporta as funções Port-Multiplier/RAID 0,1
LAN
Suporte
para áudio
de alta

Suporta a especificação High-Definition Audio

ALC888S

Saída de áudio de 7.1 canais

definição
IEEE 1394

Ti tsb43ab22a (TPower X58)
Ranhura PCI

Ranhura PCI Express Gen2 x16
Ranhuras

(x16)

Ranhura PCI Express Gen2 x16
(x4)

Ranhura PCI Express x1

TPower X58/TPower X58A
ESPECIFICAÇÕE

Conectores
na placa

Conector da unidade de disquetes

Cada conector suporta 2 unidades de disquetes

Conector IDE

Cada conector suporta 2 dispositivos IDE

Conector SATA

Cada conector suporta 1 dispositivo SATA

Conector do painel frontal

Para suporte de várias funções no painel frontal

Conector de áudio frontal

Suporta a função de áudio no painel frontal

Conector para entrada de CDs

Suporta a entrada de áudio a partir de CDs

Conector de saída S/PDIF

Suporta a saída de áudio digital

Conector da ventoinha da CPU

Conector da ventoinha do sistema

Conector para limpeza do CMOS

Conector USB

Alimentação da ventoinha da CPU (com a função Smart
Fan)
Alimentação da ventoinha do sistema

Cada conector suporta 2 portas USB no painel frontal

Conector IEEE 1394 (TPower X58) x1
Conector de alimentação

(24 pinos)
Conector de alimentação

(8 pinos)
Conector de alimentação

(4 pinos)

Entradas/S
aídas no
painel
traseiro

Tamanho
da placa

Teclado PS/2

Porta LAN

Porta USB

Tomada de áudio

Porta eSATA

Porta 1394 (TPower X58)

+coaxial ótico saída S/PDIF

244 mm (L) X 305 mm (A)

Sistemas
operativos
suportados

ATX
A Biostar reserva-se o direito de adicionar ou remover

Windows XP / Vista 32 / Vista 64

suporte para qualquer sistema operativo com ou sem
aviso prévio.

Motherboard Manual

POLISH
SPEC
Obsługa Execute Disable Bit / Enhanced Intel
Procesor

SOCKET 1366

SpeedStep® / Intel Architecture-64 / Extended

Procesor Intel Core i7 Extreme / Core i7

Memory 64 Technology / Virtualization Technology /
Hyper Threading

QPI
Chipset

6.4GT/s
Intel X58
Intel ICH10R
Moduł pamięci DDR3 z trybem podwójnego & potrójna

Gniazda DDR3 DIMM x 6
Pamięć

Każde gniazdo DIMM obsługuje moduły

główna

512MB / 1GB / 2GB / 4GB

Brak obsługi Registered DIMM oraz ECC DIMM

IT8720

IDE

Obsługa DDR3 1866(OC) / 1600(OC) / 1333 / 1066 /
800

Maks. wielkość pamięci 24GB

Super I/O

ilość kanału

Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje Monitor H/W
Super I/O.

Kontroler/Monitor prędkości wentylatora

Interfejs Low Pin Count

Funkcja ITE "Smart Guardian"
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

JMB363

obsługa PIO tryb 0~4,
Transfer danych do 3 Gb/s.

SATA II

ICH10R

Zgodność ze specyfikacją SATA w wersji 2.0.
Obsługa RAID 0 / 1 / 5 / 1+0
Transfer danych do 3 Gb/s.

eSATA

JMB363

Zgodność ze specyfikacją SATA w wersji 2.0.
Obsługa Port-Multiplier/RAID 0,1

LAN

Obsługa
audio HD

10 / 100 / 1000 Mb/s z automatyczną negocjacją

Realtek RTL 8111C x2 (TPower X58)
Realtek RTL 8111C x1 (TPower X58A)

Ti tsb43ab22a (TPower X58)

Gniazda

Gniazdo PCI

7.1 kanałowe wyjście audio

Gniazdo PCI Express Gen2 x16
(x16)

Działanie w trybie połowicznego / pełnego dupleksu
Obsługa High-Definition Audio

ALC888S

IEEE 1394

szybkości

TPower X58/TPower X58A
SPEC
Gniazdo PCI Express Gen2 x16
(x4)

Gniazdo PCI Express x1

Złącze napędu dyskietek

Każde złącze obsługuje 2 napędy dyskietek

Złącze IDE

Każde złącze obsługuje 2 urządzenia IDE

Złącze SATA

Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego

Obsługa elementów panela przedniego

Przednie złącze audio

Obsługa funkcji audio na panelu przednim

Złącze wejścia CD

Obsługa funkcji wejścia audio CD

Złącze wyjścia S/PDIF

Obsługa funkcji cyfrowego wyjścia audio

Złącze główkowe wentylatora
Złącza

procesora

wbudowane Złącze główkowe wentylatora
systemowego

Zasilanie wentylatora procesora (z funkcją Smart Fan)

Zasilanie wentylatora systemowego

Złącze główkowe kasowania CMOS x1

Back Panel
I/O

Wymiary
płyty

Złącze USB

Złącze IEEE 1394 (TPower X58)

Złącze zasilania (24 pinowe)

Złącze zasilania (8 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Port LAN

Port USB

Gniazdo audio

Port eSATA

Port 1394 (TPower X58)

Optyczny +coaxial wyjścia S/PDIF

244 mm (S) X 305 mm (W)

Obsluga
systemu
operacyjne
go

Każde złącze obsługuje 2 porty USB na panelu
przednim

ATX

Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista 32 / Vista 64

odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.

Motherboard Manual

RUSSIAN
СПЕЦ
CPU

Поддержка технологий Execute Disable Bit /

(центральн SOCKET 1366

Enhanced Intel SpeedStep® / Intel Architecture-64

ый

/ Extended Memory 64 Technology / технологии

Процессор Intel Core i7 Extreme / Core i7

процессор)

виртуализация / Hyper Threading

QPI

6.4GT/s

Набор

Intel X58

микросхем Intel ICH10R
Модуль памяти с двухканальным & 3-канал
Слоты DDR3 DIMM x 6

режимом DDR3

Основная

Каждый модуль DIMM поддерживает

Поддержка DDR3 1866(OC) / 1600(OC) / 1333 /

память

512МБ / 1ГБ / 2ГБ / 4 ГБ DDR3

1066 / 800

Максимальная ёмкость памяти 24ГБ

Не поддерживает зарегистрированные модули
DIMM and ECC DIMM

Super I/O

IT8720

Инициативы по охране окружающей среды,

Обеспечивает наиболее используемые

Аппаратный монитор

действующие функциональные

Регулятор скорости вентилятора/ монитор

возможности Super I/O.

Функция ITE "Smart Guardian"

Интерфейс с низким количеством выводов (Интеллектуальная защита)
Режим "хозяина" шины Ultra DMA 33 / 66 / 100 /
IDE

JMB363

133
Поддержка режима PIO 0~4,
скорость передачи данных до 3 гигабит/с.

SATA II

ICH10R

Соответствие спецификации SATA версия 2.0.
Поддержка RAID 0 / 1 / 5 / 1+0
скорость передачи данных до 3 гигабит/с.

eSATA

JMB363

Соответствие спецификации SATA версия 2.0.
Поддержка Port-Multiplier/RAID 0,1
Автоматическое согласование 10 / 100 / 1000

Локальная Realtek RTL 8111C x2 (TPower X58)
сеть

Realtek RTL 8111C x1 (TPower X58A)

Мб/с
Частичная / полная дуплексная способность

Звуковая
поддержка
жесткого

Звуковая поддержка High-Definition

ALC888S

7.1канальный звуковой выход

диска
IEEE 1394

Ti tsb43ab22a (TPower X58)

Слоты

Слот PCI

Слот PCI Express Gen2 x16
(x16)

TPower X58/TPower X58A
СПЕЦ
Слот PCI Express Gen2 x16
(x4)

Слот PCI Express x1

Разъём НГМД

Разъём IDE

Каждый разъём поддерживает 2 встроенных
интерфейса накопителей

Разъём SATA

Каждый разъём поддерживает 1 устройство SATA

Разъём на лицевой панели

Поддержка устройств на лицевой панели

Входной звуковой разъём

Разъём ввода для CD

Поддержка функции ввода для CD

Разъём вывода для S/PDIF

Поддержка вывода цифровой звуковой функции

вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы

Поддержка звуковых функций на лицевой
панели

Источник питания для вентилятора центрального

Встроенны Контактирующее приспособление
й разъём

Каждый разъём поддерживает 2 накопителя на
гибких магнитных дисках

процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы

Открытое контактирующее
приспособление CMOS

USB-разъём

IEEE 1394-разъём (TPower X58)

Разъем питания (24 вывод)

Разъем питания (8 вывод)

Разъем питания (4 вывод)

Клавиатура PS/2

Порт LAN

Задняя

USB-порт

панель

Гнездо для подключения

средств

наушников

ввода-выв eSATA порт

ода

1394-порт (TPower X58)

Каждый разъём поддерживает 2 USB-порта на
лицевой панели

Оптически +coaxial вывода для S/PDIF
x1
Размер
панели
Поддержка
OS

244 мм (Ш) X 305 мм (В)

ATX

Windows XP / Vista 32 / Vista 64

удалять средства обеспечения для OS с или без

Biostar сохраняет за собой право добавлять или
предварительного уведомления.

‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫‪SOCKET 1366‬‬

‫‪SpeedStep® / Intel Architecture-64 / Extended‬‬

‫اﻟﻤﺮآﺰیﺔ‬

‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Intel Core i7 Extreme / Core i7‬ﻣﻌﺎﻟﺠﺎت‬

‫‪Memory 64 Technology / Virtualization‬‬

‫‪QPI‬‬

‫‪6.4GT/s‬‬

‫‪Technology / Hyper Threading‬‬

‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬

‫‪Intel X58‬‬
‫‪Intel ICH10R‬‬

‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬

‫ﻋﺪد‪6‬‬

‫ﻣﻴﺠﺎ ‪ 512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬

‫‪ 800 / 1066 /‬ﺳ ﻌﺎت ‪ DDR3‬ﻥ ﻮع ﻡﻦ اﻟﺬاآﺮة ﺗ ﺪﻋﻢ‬

‫ﻏﺐ‪/4‬ﻏﺐ‪/2‬ﻏﺐ‪1‬‬

‫ﺑﺎی ﺖ ﻡﻴﺠ ﺎ ‪1866(OC) / 1600(OC) / 1333‬‬

‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪24‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬

‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪IT8720‬‬
‫‪Super I/O‬‬

‫ﺛﻼﺛﻴّﺔ ﻗﻨ ﺎة & اﻟﻤﺰدوﺟﺔ ‪ DDR3‬ذاآﺮةواﺣﺪة‬

‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬

‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬

‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫ﻡﻨﻔﺬ ‪IDE‬‬

‫‪JMB363‬‬

‫‪SATA II‬‬

‫‪ICH10R‬‬

‫‪eSATA‬‬

‫‪JMB363‬‬

‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪ 2.0.‬اﻹﺹﺪار‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪RAID 0 / 1 / 5 / 1+0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪ 2.0.‬اﻹﺹﺪار‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪RAID 0,1 /Port-Multiplier‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫ﺷﺒﻜﺔ داﺧﻠﻴﺔ‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬

‫)‪Realtek RTL 8111C x2 (TPower X58‬‬

‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬

‫)‪Realtek RTL 8111C x1 (TPower X58A‬‬

‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬

‫‪ALC888S‬‬

‫‪ 7.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫اﻟﺘﻌﺮیﻒ‬
‫‪IEEE 1394‬‬

‫)‪Ti tsb43ab22a (TPower X58‬‬

‫اﻟﻔﺘﺤﺎت‬

‫ﻓﺘﺤﺔ ‪PCI‬‬

‫ﻋﺪد ‪2‬‬

‫)‪(x16‬ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬ﻋﺪد ‪2‬‬
‫)‪(x4‬ﻓﺘﺤﺔ ‪ PCI Express Gen2 x16‬ﻋﺪد ‪1‬‬
‫‪64‬‬

‫‪TPower X58/TPower X58A‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺣﺔ‬

‫ﻡﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬

‫ﻓﺘﺤﺔ ‪PCI Express x1‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﻣﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬

‫ﻣﻨﻔﺬ ‪IDE‬‬

‫ﻋﺪد ‪1‬‬

‫‪IDE‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ اﺙﻨﻴﻦ ﻣﻦ أﺝﻬﺰة‬

‫ﻣﻨﻔﺬ ‪SATA‬‬

‫ﻋﺪد ‪6‬‬

‫‪SATA‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة‬

‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬

‫ﻣﻨﻔﺬ ‪CD-IN‬‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ دﺥﻞ ﺹﻮت اﻟﻘﺮص اﻟﻤﺪﻣﺞ‬

‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬

‫ﻋﺪد ‪1‬‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬

‫ﻋﺪد ‪1‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ‬

‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪2‬‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻨﻔﺬ )‪IEEE 1394 (TPower X58‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪8‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬

‫ﻋﺪد ‪1‬‬

‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬

‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬

‫ﻋﺪد ‪2‬‬

‫ﻣﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪8‬‬

‫ﻣﻘﺒﺲ ﺹﻮت‬

‫ﻋﺪد ‪6‬‬

‫ﻣﻨﻔﺬ‪eSATA‬‬

‫ﻋﺪد‪2‬‬

‫ﻣﻨﺎﻓﺬ )‪1394 (TPower X58‬‬

‫ﻋﺪد ‪1‬‬

‫ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‪USB‬یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ‬

‫ﻣﺤﻮر ﻣﺘّﺤﺪ ‪+‬ﺑﺼﺮیّﺔ ﻣﻨﻔﺬ ﺥﺮج ‪ S/PDIF‬ﻋﺪد ‪1‬‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬

‫‪ 244‬ﻣﻢ )ﻋﺮض( ‪ 305 X‬ﻣﻢ )ارﺗﻔﺎع(‬

‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬

‫‪Windows XP / Vista 32 / Vista 64‬‬

‫‪65‬‬

‫‪ATX‬‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺧﻄﺎر ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫أو ﺑﺪون إﺧﻄﺎر‪.‬‬

Motherboard Manual

JAPANESE
仕様
Execute Disable Bit / Enhanced Intel SpeedStep® /
CPU

SOCKET 1366

Intel Architecture-64 / Extended Memory 64

Intel Core i7 Extreme / Core i7 processor Technology / Virtualization Technology / Hyper
Threadingをサポートします

QPI

6.4GT/s
Intel X58

チップセット

メインメモリ

Super I/O

IDE

Intel ICH10R
DDR3 DIMMスロット x 6

デュアル & 三倍 チャンネルモードDDR3メモリモジュール

各DIMMは 512MB / 1GB / 2GB / 4GB

DDR3 1866(OC) / 1600(OC) / 1333 / 1066 / 800 をサ

DDR3をサポート

ポート

最大メモリ容量24GB

登録済みDIMMとECC DIMMはサポートされません

IT8720

環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O H/Wモニター
機能を採用しています。

ファン速度コントローラ/ モニター

低ピンカウントインターフェイス

ITEの「スマートガーディアン」機能
Ultra DMA 33 / 66 / 100 / 133バスマスタモード

JMB363

PIO Mode 0~4のサポート
最高3 Gb/秒のデータ転送速度

SATA II

ICH10R

SATAバージョン2.0仕様に準拠。
RAID 0 / 1 / 5 / 1+0のサポート
最高3 Gb/秒のデータ転送速度

eSATA

JMB363

SATAバージョン2.0仕様に準拠。

Realtek RTL 8111C x2 (TPower X58)

10 / 100 / 1000 Mb/秒のオートネゴシエーション

Realtek RTL 8111C x1 (TPower X58A)

半/全二重機能

RAID 0,1 /Port-Multiplierのサポート
LAN
HDオーディ

ハイデフィニションオーディオのサポート

ALC888S

7.1 チャンネルオーディオアウト

オのサポート
IEEE 1394

Ti tsb43ab22a (TPower X58)

スロット

PCIスロット

PCI Express Gen2 x16スロット
(x16)

PCI Express Gen2 x16スロット
(x4)

TPower X58/TPower X58A
仕様
PCI Express x1スロット

フロッピーコネクタ

各コネクタは2つのフロッピードライブをサポートします

IDEコネクタ

各コネクタは2つのIDEデバイスをサポートします

SATAコネクタ

各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ

フロントパネル機能をサポートします

フロントオーディオコネクタ

フロントパネルオーディオ機能をサポートします

CDインコネクタ

CDオーディオイン機能をサポートします

S/PDIFアウトコネクタ

デジタルオーディオアウト機能をサポートします

オンボードコ CPUファンヘッダ

CPUファン電源装置(スマートファン機能を搭載)

ネクタ

システムファンヘッダ

システムファン電源装置

CMOSクリアヘッダ

USBコネクタ

IEEE 1394コネクタ(TPower X58)

電源コネクタ(24ピン)

背面パネル
I/O

電源コネクタ(8ピン)

電源コネクタ(4ピン)

PS/2キーボード

LANポート

USBポート

オーディオジャック

eSATAポート

1394ポート(TPower X58)

光学+coaxial S/PDIFアウト

ボードサイズ 244 mm (幅) X 305 mm (高さ)
OSサポート Windows XP / Vista 32 / Vista 64

各コネクタは2つのフロントパネルUSBポートをサポートし
ます

ATX
Biostarは事前のサポートなしにOSサポートを追加または削
除する権利を留保します。

2009/08/06

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2009:08:06 14:11:48+08:00
Modify Date                     : 2009:08:06 14:11:48+08:00
Page Count                      : 69
Creation Date                   : 2009:08:06 06:11:48Z
Mod Date                        : 2009:08:06 06:11:48Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 97031
Metadata Date                   : 2009:08:06 06:11:48Z
Creator                         : 97031
Title                           : Microsoft Word - IX58A-AXP_IX58B-AXP_090806.doc

EXIF Metadata provided by EXIF.tools

Biostar Tpower X58 Owners Manual IX58A AXP_IX58B AXP_090806

Navigation menu

Versions of this User Manual:

Views

Navigation