4045B DDS Function Generator Manual

2014-04-30

• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1
• 1 Introduction
  • 1.1 Introduction
  • 1.2 Description
  • 1.3 Specifications
• 2 Installation
  • 2.1 Introduction
  • 2.2 Package Contents
  • 2.3 Instrument Mounting
  • 2.4 Power Requirements
  • 2.5 Fuse Replacement
  • 2.6 Grounding Requirements
  • 2.7 Signal Connections
• 3 Operating Instructions
  • 3.1 General Description
  • 3.2 Display Window
  • 3.3 Front Panel Controls
  • 3.4 Connectors
  • 3.5 Output Connections
  • 3.6 MENU Keys
    • 3.6.1 WAVEFORM Keys
    • 3.6.2 MODE Key
    • 3.6.3 UTILITY Key
    • 3.6.4 SWEEP Key
    • 3.6.5 MODULATION Key
  • 3.7 ON Key
  • 3.8 Cursor Keys
  • 3.9 Rotary Input Knob
  • 3.10 Power-On Settings
  • 3.11 Memory
  • 3.12 Displaying Errors
  • 3.13 Quick Start
    • 3.13.1 Selecting a Standard Waveform
    • 3.13.2 Setting the Output
    • 3.13.3 Using Voltage Offset
    • 3.13.4 Storing and Recalling a Waveform Generator Setup
• 4 Programming
  • 4.1 Overview
    • 4.1.1 Connecting to USB (Virtual COM) Interface
    • 4.1.2 USB (Virtual COM) Settings
  • 4.2 Device States
    • 4.2.1 Local State (LOCS)
    • 4.2.2 Remote State (REMS)
  • 4.3 Message Exchange Protocol
    • 4.3.1 The Input Buffer
    • 4.3.2 The Output Queue
    • 4.3.3 Response Messages
  • 4.4 Instrument Identification
  • 4.5 Instrument Reset
  • 4.6 Command Syntax
    • 4.6.1 General Command Structure
  • 4.7 Status Reporting
    • 4.7.1 The Error Queue
    • 4.7.2 Error Codes
  • 4.8 COMMON COMMANDS
    • 4.8.1 System Data Commands
    • 4.8.2 Internal Operation Commands
    • 4.8.3 Device Trigger Commands
    • 4.8.4 Stored Settings Commands
  • 4.9 INSTRUMENT CONTROL COMMANDS
    • 4.9.1 Default Subsystem
    • 4.9.2 Arbitrary Subsystem