Bk New Products 2017 User Manual

User Manual: Bk New-Products-2017 New-products-2017 pdf s

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

2017
New Products Catalog

AC Power
9830 Series Programmable AC Sources

The 9830 Series are low distortion, single-phase AC power sources delivering a maximum of
3000 VA, 300 Vrms, 30 Arms / 97.5 Apk with the output frequency adjustable from 45 Hz – 1200
Hz. Housed in a compact 3U form factor, the AC source is capable of generating both AC, DC,
and AC+DC output.

Applications
•
Pre-compliance testing according to
IEC61000-3-2
•
Evaluating transformers, TRIACs, SCRs,
and passive components
•
Simulating common power grid faults
and disturbances

Clipped Sine Wave

Model

9832

9833

Max power

2000 VA

3000 VA

Max voltage (rms)
Max current (rms)

150 V / 300 V / Auto
±212 V / ±424 V

0 – 150 V

20 A

30 A

0 – 300 V

10 A

15 A

Frequency range

45 – 1200 Hz

Load regulation

≤ 0.1 % FS (resistive load)

Total harmonic distortion (THD)

≤ 0.5 % at 45 - 400 Hz (resistive load)

Remote interfaces

USB (USBTMC-compliant), GPIB, and LAN

ElectriKit
A helpful tool for electricians,
technicians, engineers, students,
hobbyists and anyone dealing
with electrical power.

2

AC
DC

Features & Benefits
■■ Measurements: Vrms, Arms, Vdc, +Apk,
-Apk, inrush current, frequency, power
factor, apparent power, reactive power,
true power, and crest factor
■■ All measurements can be displayed
simultaneously on a large and bright 4.3”
color LCD
■■ Power line disturbance simulation 		
functions using STEP, LIST, and Pulse
modes
■■ Adjustable phase angle control
■■ Analog input control with a maximum
bandwidth of 1.2 kHz
■■ Save setups and waveform data to USB
flash drive
■■ Predefined sine, square, clipped sine and
THD waveforms
■■ 5 user-defined waveforms
■■ Generate custom arbitrary waveforms
on a PC and download and execute
waveforms from internal memory
■■ List mode with 10 user-defined programs
with up to 100 programmable steps each
■■ Digital I/O port for external triggering,
action completed indicator, failure status
indicator, and remote inhibit
■■ Comprehensive protection modes 		
including OVP, OCP, OTP, fan failure, and
key lock

Key Features
■■ Calculate DC power and single- or three-phase AC true
power, reactive power, and apparent power
■■ Delta-wye transformation calculator
■■ AWG size calculator to determine wire diameter,
cross-sectional area, and resistance
■■ Voltage drop calculator
■■ Ampacity table for insulated conductors per NEC Table
310.6

AC Power
9800 Series AC Power Sources
■■ Voltage and frequency sweep mode
■■ List mode: 10 user-defined programs with

up to 100 programmable steps each
■■ BNC I/O for external triggering, output

The 9800 Series is both a programmable AC
source and measurement tool. These fully
programmable linear AC sources deliver a
maximum of 1500 VA through the universal
line output terminals on the front and the
output connector on the rear.

Features & Benefits
■■ Displays Vrms, Irms, Ipeak, frequency, PF,
apparent power, true power, and elapsed
output time
■■ Adjustable phase angle control
■■ Total harmonic distortion: ≤0.5% at 45500 Hz (resistive load)

status indication/control, and 		
synchronization
■■ OVP/OCP/OPP/OTP protection modes and
key lock function
■■ Pre-compliance testing for voltage dips and
frequency simulations according to
IEC61000-4-11 / 4-14 / 4-28
■■ Standard USB (USBTMC-compliant), RS232,
LAN and GPIB (9803 and 9805 only)
interfaces

AC Output
Model

Max
power

Max current
(rms)

Max current
(peak)

9801

300 VA

3 A (0-150 V),
1.5 A (0-300 V)

12 A (0-150 V),
6 A (0-300 V)

9803

750 VA

6 A (0-150 V),
3 A (0-300 V)

24 A (0-150 V),
12 A (0-300 V)

9805

1500 VA

12 A (0-150 V),
6 A (0-300 V)

48 A (0-150 V),
24 A (0-300 V

5335B Power Meter

The 5335B is a compact, single-phase AC
power meter for measuring and analyzing
energy consumption and power quality up to
600 Vrms, 20 Arms, and bandwidth of 100 kHz.
Harmonic histogram

The parameters of each harmonic measured can be
displayed in a bar chart.

Frequency
range

Crest
factor

Line
regulation

Load
regulation

45 Hz to
500 Hz

≥4

0.1% max
for a ±10%
line change

≤ 0.5% FS
(resistive
load)

Features & Benefits
■■ 4.3-inch color TFT LCD
■■ Simultaneously measure and display up
to 12 AC and DC parameters
■■ Front panel USB host port for data storage
to a USB flash drive
■■ Standard USB (USBTMC), RS232, and LAN
interfaces
■■ Integration function with automatic range
switching for measuring electric energy
■■ External current sensor interface for
measurements above 20 A
■■ Total harmonic distortion (THD) and
harmonic measurements up to the 50th
harmonic with the ability to display
individual harmonic components
Applications
Measure power, electric energy bought or
sold back to the power grid, standby power,
and harmonics of motors, uninterruptable
power supplies, battery chargers,
appliances, and consumer electronics.

Power line disturbance
(PLD) simulator
With the PLD simulator,
users can produce
common waveform
disturbances like surges,
sags, spikes, and dropouts at user-defined locations on the waveform.

Key Specifications
Basic voltage and
current accuracy
Measurement
range

±(0.1% of reading+
0.2% of range)

Voltage

0 - 600 Vrms

Current

0 - 20 Arms

Input bandwidth

DC, 0.5 Hz – 100 kHz

Measurements

Voltage
Current
Active power
Reactive power
Apparent power
Power factor
Phase difference
Frequency
V Max/V Min
A Max/A Min
Crest factor
Integration
Harmonic distortion
factor
Total harmonic
distortion (THD)

www.bkprecision.com

3

DC Power Supplies
9129B & 9130B Series Triple Output DC Power Supplies
These triple output linear
programmable DC power supplies
feature isolated outputs that can be
adjusted independently or combined
in series or parallel to output higher
voltage or current. Additionally, these
supplies can operate in tracking mode
with user-configurable ratios between
channels.
Scan QR code to watch
9130B Series overview video

Model

Ripple and noise
Programming
resolution
Load regulation

PC software is provided for front panel emulation,
generating and executing test sequences or
logging measurement data without the need to
write source code.

Channel 2

The independent and
isolated outputs can be
used to create positive
and negative outputs
between channels 1 and
2. This feature is useful for
powering bipolar circuits
and devices.

OVDC
Channel 1

-

-VDC

9129B

9130B

9131B

9132B

30 V, 3 A

30 V, 3 A

30 V, 6 A

60 V, 3 A

Power

195 W

195 W

375 W

375 W

Voltage

≤ 5 mVp-p / 1 mVrms

≤ 1 mVrms

≤ 6 mArms

≤ 3 mArms

≤ 5 mArms (ch1/ch2)
≤ 4 mArms (ch3)

Ch1 & Ch2
Output ratings

Bipolar output
configuration

+VDC

+

Ch3

5 V, 3 A

Current
Voltage

10 mV / 1 mA

1 mV / 1 mA

CV

< 0.02% + 4 mV

≤0.01% + 3 mV

CC

< 0.2% + 3 mA

≤0.1% + 3 mA

Current

Remote interface

USB Adapter

USB (USBTMC), RS232, GPIB

Memory locations

29

36

Remote sense

--

√

Output timer

--

√

≤4
mArms

9103 & 9104 Multi-Range DC Power Supplies
The 9103 and 9104 can replace multiple
supplies on your bench or in your rack. Unlike
conventional supplies with fixed output ratings,
these power supplies automatically recalculate
voltage and current limits for each setting,

Model 9103 / 9104
output characteristics

combination within the rated voltage and
current limits.

Voltage
84V

42V

providing max output power in any Volt/Amp

9103
9104

Model

320 W maximum
power curve
Ripple and
noise

16V

4

9103

9104

Variable output voltage

0 – 42 V

0 – 84 V

Variable output current

0 – 20 A

0 – 10 A

Max power

32V

0

Features & Benefits
■■ Save up to 3 user-defined voltage and
current presets for quick recall
■■ Output On/Off control
■■ Step and ramp programming function
■■ Analog remote control function
■■ USB interface
■■ Remote sense terminal

3.8A 7.6A 10A

20A Current

Voltage
regulation

Voltage

320 W
≤80 mVp-p / ≤8 mVrms

Current

≤200 mA

Load (0-100% rated curent)

≤120 mV

Line (90-264 VAC variation)

≤50 mA
≤100 mV
≤10 mV

High Power Density DC Electronic Loads
SDL Series Programmable DC Electronic Loads

MDL302 Dual-Channel
Modular DC Electronic Load

The SDL Series high power/high voltage DC electronic loads offer the industry’s highest power
density (8 kW in 5U form factor) without sacrificing performance. The DC electronic loads can
operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant
power (CW) mode, and provide arbitrary and pulse generator capabilities, analog control, and
standard LAN, GPIB, USB, and RS232 interfaces for remote communication.

Special applications
The SDL Series offers a wide operating voltage range up to 1000 V making it ideal for hybrid,
plug-in hybrid, and battery electric vehicle (HEV/PHEV/BEV) test applications. Using the
built-in arbitrary generator, the DC loads are suitable for DC power bus simulation required
for immunity testing.
■■ 

Features & Benefits
■■ 0.05% CC mode readback accuracy
■■ Intelligent PWM fan speed control reduces
unnecessary fan noise and optimizes heat
management
■■ 16-bit voltage and current measurement
system
■■ Built in arbitrary and pulse generator for
continuous, pulsed, and toggled transient
operation
■■ Highest power density of 1.6 kW per 1U
rack space
■■ Isolated analog control interface
■■ Flexible ranging options: High and Low,
Manual or Auto
■■ Programmable slew rise and fall time

■■ Fast 50 µs transient time in CC mode and

500 µs in CV mode
■■ Remote inhibit and dry contact fault
output
■■ Soft-start functionality
■■ Master/slave capability to increase
current by paralleling multiple units with
the same voltage rating
■■ Standard LAN, GPIB, USB, and RS232
interface supporting SCPI commands for
remote control
■■ OVP/UVP/OCP/UCP/OPP/UPP protection

Power

Voltage

Current

Form factor

Weight

Model

4000 W

600 V

150 A

4000 W

800 V

75 A

4000 W

1000 V

25 A

SDL-1000-25

8000 W

600 V

300 A

SDL-600-300

8000 W

800 V

150 A

8000 W

1000 V

50 A

SDL-600-150
3U

5U

21 kg

33 kg

The MDL302 can support a full 300 W on each
input channel with a voltage and current
operating range up to 80 V/45 A, or 600 W
combined, offering the industry’s highest power
dual-channel DC load module.

Install up to 8 MDL302 modules into the MDL
Series mainframe with extension for a total of 16
x 300 W channels. The load modules can be used
independently or synchronized and paralleled
for increased current and power.
Applications
The MDL302 can be used for testing
multi-output AC/DC supplies, batteries, fuel
cells, and photovoltaic arrays.

Key Specifications
Operating
modes

CC/CV/CR/CW/CZ

Input voltage

0 – 80 V

Input current

SDL-1000-50

0 – 4.5 A

High

0 – 45 A

Input power

300 W (CH1) / 300 W (CH2)

Transient
operation
(CC mode)

Up to 25 kHz

CC mode
(low range)

SDL-800-75

SDL-800-150

Low

Resolution

1 mV

Accuracy

+ (0.05 % +
0.025 % F.S.)

Remote
interface

GPIB, LAN, USB (USBTMC),
RS232, and external analog
control and monitoring
terminal

Protection
modes

OVP/OCP/OPP/OTP

www.bkprecision.com

5

DC Electronic Loads
8600 Series Programmable DC Electronic Loads

Model 8600-8602

The 8600 Series programmable DC electronic
loads provide the performance of modular
system DC electronic loads in a compact
benchtop form factor. With fast transient
operation speeds up to 25 kHz, and high
16-bit measurement resolution and accuracy,
these DC loads can be used for testing and
evaluating a variety of DC sources such as DC
power supplies, DC-DC converters, batteries,
battery chargers, and photovoltaic arrays.

Model 8610-8622

Features & Benefits
■■ CC / CV / CR / CW operating modes
■■ Measurement speed to 50 kHz
■■ Remote sense function
■■ Adjustable slew rate in CC mode
■■ Standard RS232, USB (USBTMC), and GPIB
interfaces supporting SCPI commands for
remote control
■■ Analog current control and monitoring
■■ OVP / OCP / OPP / OTP and reverse
voltage protection

Scan QR code to watch
the 8600 Series overview video

Input Ratings

6

Form
factor

Battery test function

The built-in battery test function uses CC
mode to calculate the battery capacity
using a fixed current load discharge. Users
can specify cut-off voltage level, capacity
level and time stop conditions.

CR-LED mode
Model

Power

Voltage

Current

150 W

120 V

30 A

250 W

120 V

60 A

200 W

500 V

15 A

8602

750 W

120 V

120 A

8610

750 W

500 V

30 A

8612

1500 W

120 V

240 A

1500 W

500 V

60 A

3000 W

120 V

480 A

8620

2500 W

500 V

100 A

8622

4500 W

120 V

600 A

6000 W

120 V

720 A

8600
2U half-rack

3U

6U

8601

8614
8616

8624
8625

Use the load’s unique CR-LED operating
mode to test LED drivers. This function
allows users to configure the LED’s
operating resistance and forward voltage
to simulate the loading behavior of typical
LEDs.

LCR & DC Resistance Meters
2800 Series DC Resistance Meters
The 2800 Series DC resistance meters feature high accuracy and resolution. The 2840 is
economically priced to meet the need of applications where extended range and temperature
correction are not required.

Features & Benefits
■■ Four-terminal Kelvin type test leads
included
■■ Low power test mode to protect DUT
■■ Manual or Auto ranging
■■ User selectable speed options
■■ Zero correction
■■ High-speed bin-sorting with statistical
functions
■■ Comparator with pass/fail alarm beeper
function
■■ Memory for 30 groups of parameters
■■ Screen capture to USB drive
■■ AC input power line filtering to eliminate
the influence of noise on the instrument
■■ Handler interface

Applications
Both meters are ideally suited for measuring
contact resistance of relays, switches,
interconnects, PCB traces, bonds, and cables.
The 2841 adds extended range, accuracy and
temperature measurement for evaluating
coils, motor windings, transformers,
actuators and conductive materials.

Touch screen to zoom or enter values

Model

2840

2841

Measurement range

1 µΩ to 20 kΩ

0.1 µΩ to 110 MΩ

Best accuracy

0.05%

0.01%

Measurement resolution

1 µΩ

0.1 µΩ

Displayed measurements

1

1 or 2

Measurement functions*

R and LPR

R, R-T, T, LPR, LPR-T

Ranges

4 + Auto

11 + Auto

Temperature measurements
(TC and △t)

--

√

Bins

3

10

Remote interface

RS232, USB (USBTMC)

LAN, RS232, USB (USBTMC)

* R – Resistance, LPR – Low Power Resistance, T - Temperature

880 100 kHz Dual Display Handheld LCR Meter
The 880 offers many features typically
found only in bench LCR meters such as test
frequencies up to 100 kHz, selectable test
signal levels, and 4-terminal measurement
capabilities to help minimize measurement
errors and improve measurement accuracy.

Kelvin clip test leads (TL8KC1)

Key Specifications
Features & Benefits
■■ 40,000 counts resolution on primary and
10,000 counts resolution on secondary
display
■■ Automatic calculation of secondary
parameters D, Q, θ, ESR and DCR
■■ Data Hold and Min/Max/Average recording
■■ USB (Virtual COM) interface and SCPI
compliant commands for remote
communication

Measurements

L, C, R, G, X, Z, Y, B, G, θ,
Q, D, DCR

Basic accuracy

0.1%

Test frequency

100 Hz, 120 Hz,
1 kHz, 10 kHz, 100 kHz

Backlit display

√

Auto detect mode

√

Tolerance mode

1%, 5%, 10%, 20%

Measurement rate

4 readings/sec (fast)
1.5 readings/sec (slow)

SMD tweezer (TL8SM)

Standard accessories include an AC
adapter with rechargeable 9 V battery,
mini USB cable, shorting plate,
banana-to-alligator test leads, Kelvin clip
test leads, and additional tweezer
accessory for convenient measurement of
SMD components.

www.bkprecision.com

7

LCR Meters
894 & 895 Performance LCR Meters
The 894 and 895 are high accuracy and high precision bench LCR meters capable of measuring inductance, capacitance, and resistance with
a basic accuracy of 0.05% over a frequency of up to 1 MHz. These meters feature a vivid 4.3-inch TFT LCD with five convenient display modes,
auto level control (ALC), cable length compensation (1/2/4 m), and bin sorting comparator. For accurate measurements, these performance LCR
meters provide Open, Short, and Load corrections.
USB host port
Connect your USB flash drive to
conveniently save data logs, settings,
and screenshots.

Intuitive user interface
Easily change test parameters using
the menu-driven front panel keypad.

Pass/Fail LED indicators

Model 895

4.3" TFT color display

Variable test signals
The instrument provides settable voltage
levels from 5 mVrms to 2 Vrms to evaluate
your DUT.

Zoom display mode
With a touch of a button, users can enlarge
the display for easy viewing from a distance.
The voltage and current across the DUT are
also monitored in this display mode.

8

List sweep

BIN comparator

Remote PC control

Use the built-in sweep function to conveniently
display, analyze and store primary and secondary
parameters of a component at up to 201 frequencies.

Use the BIN comparator function to sort components
in up to 10 bin locations.

Integrate your LCR meter into an automated
test system and control it from a PC using SCPI
commands via the RS232, USB, LAN, or GPIB
interface.

LCR Meters
891 Bench LCR Meter
The 891 is a compact, precise, and versatile LCR meter capable of
measuring inductors, capacitors and resistors at DC or from 20 Hz to
300 kHz, at both low and high impedance ranges. A large color display
with all important parameters and measurement visible on one screen
makes this meter easy to operate. The outstanding performance of the
891 makes it an invaluable tool for production, quality control, and
R&D.

Linear and logarithmic sweep function
to characterize components up to 300
kHz

Model

891

Measurement parameters

L, C, R, G, X, Z, θ, Q, D, DCR

Quickly sort components with 9 primary
BINs, 1 secondary BIN, and 1 out BIN

894

895

L, C, R, G, X, Z, Y, B, G, θ, Q, D, DCR

Basic accuracy

0.1%

0.05%

DCR measurement range

0.1 Ω - 20 MΩ

0.01 Ω - 100 MΩ

Frequency range

20 Hz - 300 kHz

Frequency accuracy

0.1%

0.01%

AC level range

0.5 Vrms and 1 Vrms (fixed)

5 mVrms - 2 Vrms / 50 µArms - 20 mArms (adjustable)

DC bias

-

0 V - +5V / 0 mA - +25 mA

Test signal

Output impedance

20 Hz - 500 kHz

20 Hz - 1 MHz

100 Ω (typical)

30 Ω, 50 Ω, or 100 Ω

Selectable measurement speeds

200 ms (Fast), 800 ms (Slow)

13 ms (Fast), 90 ms (Med), 370 ms (Slow)

Auto level control (ALC)

-

√

Cable length compensation

-

√

Handler interface

-

√

Remote interface

USB (Virtual COM), GPIB, and
LAN

RS232, USB (USBTMC), LAN, and GPIB (895 Only)

Dimensions

258 x 113 x 381 mm

369 x 108 x 408 mm

Weight

3.4 kg

5 kg

LCR Meter Guide
Introduction to the benefits of LCR meters and the theory behind the
measurements, plus related terms and example applications.
For more guides and applications, visit: bkprecision.com/product-applications

www.bkprecision.com

9

Battery Test Solutions
Battery charge/discharge solution with sequencing and data logging

B&K Precision offers a wide array of internal
resistance/impedance based battery test
solutions including handheld and benchtop
units for field environments, labs, quality
control, and production use, as well as
frequency response analyzers for complex
AC impedance data analysis and charge/
discharge systems.

Cdl

RS

Power Supply

DC Electronic Load

Charge

Rct

Discharge

Model of simplified Randles cell

Model

9200/9115 and 8600/SDL Series

600B & 601B

BA6010 & BA6011

FRA8000

Test method

Charge / Discharge
Charge and discharge
battery while logging results

DC Resistance
Measure open and loaded
battery voltage and calculate
internal DC resistance

AC Impedance
Uses a 1 kHz fixed frequency
AC signal to calculate battery
impedance

EIS (electrochemical impedance
spectroscopy)
Stimulate the battery with a low-level
sinusoidal AC current at a particular
frequency and then measure both
the stimulating AC current and the
resultant AC voltage. Repeat for various
frequencies.

Result

V/I plots with calculated
amp-hours (Ah)

Displays remaining capacity
of lead-acid battery in %

Real-time display of voltage,
impedance, phase angle and
capacitance

Real-time display of voltage, current
and impedance. Generates Nyquist and
Bode plots to identify specific battery
model elements.

Advantages

Measures actual capacity of
a battery directly

Quick, easy and repeatable
measurement

Fast measurement speed.
Ability to measure battery
capacitance.

Provides large amount of data and
detailed information about individual
battery model elements

Disadvantages

Time consuming

Ignores battery capacitance,
resistive battery model
elements lumped together

Individual battery model
elements seen as one
impedance value

Requires complex data analysis

BA6000 Series Battery Analyzers

The BA6000 Series Battery Analyzers use a
1 kHz AC constant current source to measure
the battery’s impedance expressed by
11 different measurement functions. With
a basic voltage and impedance accuracy
of 0.1% and micro-ohm resolution, these
instruments are well-suited for analyzing
a wide range of battery types and
configurations in the lab, quality control and
manufacturing environments.

10

Model

Input voltage

Input
range

BA6010

100 uV to 60 V

6 V / 60 V

BA6011

100 uV to 300 V

30 V / 300 V

Features & Benefits
■■ 4.3 inch color LCD display
■■ Graphing display of voltage and resistance
with on-screen measurement tools
■■ 4-wire test fixture with monitoring for
Hi drive open, Low drive open, and both
open
■■ Compare and sort using 10 bins with
statistical evaluations
■■ Δ% mode for quickly determining the
percent difference between batteries
■■ Pass/Fail indicator with audible tone
■■ 50 measurements per sec
■■ Handler interface
■■ Internal and external file storage

Dual Display

Data logging

Measurement functions

Test signal

Basic accuracy
impedance

Impedance
resolution

Voltage
resolution

Remote interface

R, R-V, V, R-Q, L-Q, L-R, R-X, C-D,
Z-Q, Z-R and R-C

Sine wave (1 kHz ±0.2 Hz)

0.1%

1 µΩ

1 µV

RS232, USB,
and GPIB

Battery Test Solutions
FRA8000 Frequency Response Analyzer

In combination with a DC electronic load, the FRA8000
can be used to perform electrochemical impedance
spectroscopy (EIS) measurements for analysis of:

■■ Primary and secondary batteries
■■ Super capacitors and fuel cells
■■ Corrosion and surface treatments

EIS setup

The FRA stimulates the battery via the DC load’s analog programming input with a small sinewave signal at a
specific frequency, measures the battery's voltage and current response, and calculates the complex impedance.
The FRA measurement unit is capable of extracting very small signals from noisy waveforms and compare
their gain and phase. The stimulus signal is swept from frequencies as low as 0.1 Hz to the desired maximum
frequency.

Programmable frequency range

0.1 Hz - 20 kHz

Frequency resolution

0.01 Hz

Amplitude

Up to 20% of DC bias setting or 1 Vrms

Range

10 mV – 10 V

AC source

DC bias
source

Analyzer/
measurement unit

Resolution

10 mV

Accuracy

0.1% ± 50 mV

Range

Auto

Sensitivity

1 µV

Dynamic range

120 dB

Basic accuracy

+/-2% 0.1 Hz – 9.99 Hz,
+/- 0.5% 10 Hz – 9999 Hz,
+/-1% 10 kHz – 20 kHz

Features & Benefits
■■ Sine wave generation yielding frequency
errors less than 0.02 Hz
■■ High selectivity two stage receiver 		
architecture for high noise immunity
■■ Simultaneous V/I measurement to ensure
exact impedance and phase information
■■ Auto gain control and adjustable
sampling interval to allow measurement
of micro-ohm signals buried under noise
without the need for auxiliary equipment
■■ Compatible with any DC load that has a
programmable analog input to measure
high-voltage or high-power battery packs
■■ USB, GPIB, and LAN connectivity

Nyquist diagram

Application Software Features
■■ Nyquist, Bode, and V/I graphs
■■ Real-time display of impedance 		
measurements and operating conditions
■■ Frequency sweeps with adjustable
amplitude in log/linear form
■■ Automatic or manual scaling and shifting
of screen plots for optimum viewing
■■ Advanced marker functions

600B & 601B Handheld Battery Capacity Analyzers
The 600B and 601B Handheld Battery Capacity Analyzers address the need to test and maintain sealed lead acid (SLA) batteries used in backup
power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems. By quickly characterizing a battery’s response
to a load resistance, these meters display the remaining battery capacity as an indicator of the battery’s health.
Model

600B

601B

Supported SLA battery voltages

12 V

6 V & 12 V

Ah range

7, 12, 24, 42, 65, & 100

5 - 100 in 1 Ah steps

No load (open circuit) voltage
accuracy

±2 counts

±(0.2% + 1 count)

Internal resistance

--

✓

Load voltage

--

✓
www.bkprecision.com

11

Oscilloscopes
2540C & 2560 Series Digital Storage/Mixed Signal Oscilloscopes

Model 2542C

Model 2569-MSO

The B&K Precision 2540C Series and 2560 Series offer 2- and 4-channel digital storage
oscilloscopes (DSO) and mixed signal oscilloscopes (MSO) with bandwidth up to 300 MHz,
sample rate up to 2 GSa/s, and deep memory up to 140 Mpts. Maximize productivity using
extensive features such as digital filtering, waveform recorder, pass/fail limit testing, and
automatic measurements.
In addition, these instruments provide a large 8” color display with 256 levels of intensity
grading, which allow these units to capture and display more details of a signal for analysis.
16-channel logic probe and logic analyzer function
included with MSO models.

2540C Series

2560 Series

DSO Model

2540C

2542C

2544C

2563

2565

2566

2567

2568

2569

MSO Model

2540C-MSO

2542C-MSO

2544C-MSO

2563-MSO

2565-MSO

2566-MSO

2567-MSO

2568-MSO

2569-MSO

Channels

2

2

2

4

4

2

4

2

4

Bandwidth

70 MHz

100 MHz

200 MHz

70 MHz

100 MHz

200 MHz

200 MHz

300 MHz

300 MHz

Sample rate

1 GSa/s

2 GSa/s

Max record length

14 Mpts

140 Mpts

Waveform update rate

60,000 wfms/s

140,000 wfms/s

Trigger types

Edge, Slope, Pulse, Video, Window, Interval, DropOut, Runt, Pattern

Waveform math and
analysis functions

37 Automatic Measurements, Statistics, Gating, History, Reference,
FFT, Addition, Subtraction, Multiplication, Division, Integration, Differential, Square Root

PC connectivity

Standard LAN (supports SCPI) and USB device port (USBTMC compliant)

Available Upgrades
16-channel
digital logic probe*

√

√

Logic analyzer*

√

√

Serial bus decode
and analysis package**

√

√

25 MHz function/arbitrary
waveform generator

Standard

√

*Standard on MSO model.

12

**Supporting I2C, SPI, UART, RS232, CAN, and LIN Protocols.

Oscilloscopes
Features & Benefits
■■ 16 digital channels with 500 MSa/s
sampling rate (enabled with MSO model)
■■ Large 8” widescreen display with 256-level
intensity grading and color temperature
display
■■ High speed hardware-based pass/fail
testing function
■■ 50 Ω input coupling
■■ Segmented acquisition mode for storing
the waveform into multiple memory
segments (up to 80,000)
■■ Front panel USB port for convenient
storing and recalling of waveform data,
setups, and screenshots on a USB flash
drive
■■ PC software that lets you remotely control
the oscilloscope and capture, save, and
analyze waveform data
■■ Advanced tools include digital filters with
adjustable limits and waveform recorder
mode
■■ Multi-language user interface and built-in
context sensitive help
■■ 25 MHz built-in function/arbitrary
waveform generator (standard on all
2540C Series models and available as an
option for the 2560 Series)
■■ Serial bus triggering and decoding
supporting I2C, SPI, UART, RS232, CAN,
and LIN protocols (option)
■■ Built-in Logic Analyzer (option)
■■ Statistical functions supporting Gating,
Math, History, and Ref measurements

Fast waveform capture rate

Record length up to 140 Mpts

The 2540C Series delivers up to 60,000 wfms/s update
rate and the 2560 Series delivers up to 140,000 wfms/s
update rate to help you detect infrequent anomalies
and glitches more quickly.

Using hardware-based Zoom technologies with record
lengths of up to 14 Mpts (2540C Series) or 140 Mpts
(2560 Series), users are able to capture more of their
signal with higher sampling rates and quickly zoom
into the event of interest.

History and segmented acquisition
(Sequence) mode

Eres (Enhanced Resolution) mode

Use the instrument’s History and Sequence function to
record and play back waveforms to find anomalies and
quickly locate the source of the problem via cursor or
measurement parameters.

Comprehensive statistical functions

Parametric statistical functions are available for
displaying five parameters of any measurement:
current value, mean value, minimum value, maximum
value, and standard deviation.

Eres mode can improve the SNR effectively, without
the dependence on the periodicity of the signal and
stable triggering.

Logic analyzer

4 analog channels plus 16 digital channels enable
users to acquire and trigger on the waveforms, and
then analyze the pattern simultaneously with one
instrument.

Serial bus decoding

25 MHz function/arbitrary waveform generator

Displays the decoding through the events list. Bus
protocol information can be quickly and intuitively
displayed in table form.

Take advantage of the generator’s 10 built-in
waveforms or create up to 4 of your own arbitrary
waveforms via waveform editing software.

www.bkprecision.com

13

Oscilloscope & Recorder
2190E 100 MHz Economy Digital Storage Oscilloscope

Features & Benefits
■■ FFT plus four additional math functions
■■ Versatile triggering capabilities including
pulse width, line-selectable video, slope,
and alternating trigger
■■ Advanced tools include digital filter with
adjustable limits, pass/fail testing, and
waveform recorder mode
■■ 12 different language user interfaces and
context sensitive help
■■ Special EDU mode allows educators to
disable Auto set button, Measure menu,
and Cursors menu
■■ PC software that lets you remotely control
the digital storage oscilloscope and capture, save, and analyze waveform data

The 2190E oscilloscope combines
performance and value all in one portable
solution. With a large, high-resolution
display, standard LAN and USBTMCcompatible USB interface, advanced
triggering capabilities, and extensive features
such as digital filtering, waveform
recorder and 32 automatic measurements,
this oscilloscope offers powerful tools in a
small affordable package.

Powerful measurement functions

Display and measure the input signal's frequency
spectrum. Select one of the 4 FFT windows:
Rectangular, Hanning, Hamming and Blackman.
Use cursors to measure the spectral component's
magnitude and frequency.

Key Specifications
Bandwidth

100 MHz

Sample rate

1 GSa/s

Memory

40 kpts

Display

7” widescreen color LCD with 800 x 480 resolution

I/O

Front panel USB host port supporting USB flash drives and optional
USB-to-GPIB adapter, LAN and USB (USBTMC-compliant) device port for
connection to PC, Pass/Fail output

DAS240 Portable Multi-Channel Recorder
The DAS240 is a compact, light-weight multi-channel recorder designed to meet the needs
for low level signal recording and process control applications. All input channels are isolated
and suitable for combined measurements of voltage, temperature, humidity, logic, and pulse
signals.
The DAS240 comes equipped with flexible and powerful trigger functions, e.g. trigger on event,
threshold, window, and start or stop level. For more complex applications, mathematical
calculations between channels are offered.
Key Specifications
Display
Analog channels
Range

14

10"
touchscreen
20 (expandable to 200)
1 mV to 200 V

Minimum recording
interval, 1 channel

1 ms

Minimum recording
interval, Temperature
channel

2 ms

Internal memory

32 GB

Logical inputs

12

Frequency

√

Pt100/Pt1000

√

Resistance

√

Features & Benefits
■■ Current measurement with external shunt or
accessory clamp
■■ Temperature measurement with
thermocouples (all types supported) and
resistance temperature detectors (RTDs)
Pt100 and Pt1000
■■ Internal 32 GB SSD hard drive
■■ 4 discrete alarm outputs
■■ Arithmetic operation between channels
■■ Safety (IEC610010): 100V CAT II
■■ DasLab PC software for data analysis and
remote control
■■ PC connectivity via LAN or Wi-Fi (option) for
remote configuration of the recorder and
data transfer to computer

Interfaces: 2 x USB, LAN,
Wi-Fi (optional)

DAS240 with 2 x 20 channel extension module

Signal Generators
Dual-Channel Function/Arbitrary Waveform Generators
4047B
Front panel arbitrary waveform generation
Waveform editing software

The 4047B is a versatile dual-channel 25
MHz function generator with arbitrary
waveform capability. It features a true
point-by-point AWG (arbitrary waveform
generator) architecture to produce accurate
and precise arbitrary waveforms combined
with a DDS architecture offering easy-to-use
conventional function generator capabilities.

4050B Series

The 4050B Series dual-channel function/
arbitrary waveform generators are capable
of providing stable and precise sine, square,
triangle, pulse, and arbitrary waveforms up
to 60 MHz, using a DDS-based architecture.

Common Features
■■ 4.3” color LCD display
■■ Two fully independent channels with
individual output On/Off buttons
■■ Synchronize the phase of both channels
with the push of a button
■■ Low-jitter square wave generation for
simulating reliable clock signals, 		
generating triggers, or validating serial
data buses
■■ Linear and logarithmic sweep
■■ Variable DC offset
■■ Adjustable duty cycle
■■ Internal/external triggering
■■ Gate and burst mode
■■ Built-in frequency counter

From the front panel, waveforms can be
defined from scratch by entering data
point-by-point or by loading and modifying
predefined waveforms.

Use WaveXpress to easily generate, edit, and upload
custom arbitrary waveforms to the generator via the
remote interface. Generate waveforms in the software
by importing a text file or define via freehand, point
draw, and waveform math functions.

Wide variety of modulation schemes

Harmonics generator function

These instruments are capable of many different
types of modulation for various applications.

Generate up to 10 harmonics with independent
amplitude and phase settings.

Model

4047B

4053B

4054B

4055B

Sine & Square
frequency range

0.01 Hz - 25 MHz

1 µHz - 10 MHz

1 µHz - 30 MHz

1 µHz - 60 MHz

Amplitude

0 to 10 Vpp into
50 ohms for entire
frequency range

0 to 10 Vpp into 50 ohms, ≤ 10 MHz
0 to 5 Vpp into 50 ohms, >10 MHz

Modulation

AM, FM, FSK, PM,
PWM

AM, DSB-AM, FM, PM, ASK, FSK, PSK, PWM

Vertical resolution

14 bit

AWG architecture

True point-bypoint AWG

DDS-based AWG

Sample rate

125 MSa/s

150 MSa/s

Arbitrary waveform length

16 kpts

Built-in arbitrary waveforms

9

196

Dedicated waveform keys

√

-

Channel tracking

-

√

Harmonics generator

-

√

Ext 10 MHz reference I/O

-

√

Remote interface

USB (Virtual COM)

LAN, USB device (USBTMC), USB host interface
www.bkprecision.com

15

About B&K Precision
For more than 60 years, B&K Precision has provided reliable and value-priced test and
measurement instruments worldwide.
Our headquarters in Yorba Linda, California houses our administrative and executive functions
as well as sales and marketing, design, service, and repair. Our European customers are most
familiar with B&K through our French subsidiary, Sefram. Engineers in Asia know us through
our B+K Precision Taiwan operation as well as our Itech brand. Our B&K Brasil office supports
our expanding customer base in Brazil and other South American countries. The independent
service center in Singapore services customers in Singapore, Malaysia, Vietnam, and Indonesia.

B&K Headquarters
Yorba Linda,
California, USA

B&K R&D Center
Cluj, Romania
Sefram
St. Etienne,
France

B&K Brasil
Sao Paolo, Brazil

Video Library

View product overviews, demonstrations, and
application videos in English, Spanish and
Portuguese.
Itech
Nanjing, China

http://www.youtube.com/user/BKPrecisionVideos

B+K Taiwan
B&K Taiwan
Taipei, Taiwan
Taiwan
Dynamics Circuit
Singapore

Product Applications
B&K Precision group member

© B&K Precision Corp. 2016

Independent service center

Service center location

Browse all of our supported product
and mobile applications.
http://bkprecision.com/product-applications

Product specifications and descriptions in this
document subject to change without notice.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2017:01:19 09:57:42-08:00
Metadata Date                   : 2017:01:19 10:05:55-08:00
Modify Date                     : 2017:01:19 10:05:55-08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:5f50fff2-ed5e-1f4e-89ff-568419c209ad
Original Document ID            : xmp.did:b924c8ba-28fe-4fd0-b022-9516cda85f02
Document ID                     : xmp.id:5c47f2dc-15a9-460c-8e54-55ee8a7c732e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:bd7a17f6-720c-436b-b16c-984b1ac7f4d6
Derived From Document ID        : xmp.did:41015a58-180d-413a-8577-636d55c41e57
Derived From Original Document ID: xmp.did:b924c8ba-28fe-4fd0-b022-9516cda85f02
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2017:01:19 09:57:42-08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 16
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools