Bling Lighting Technologies BL-LAFI Deng WiFi-LAFI bed lamp User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3338926
Application ID	hIhiRu+wYzhL7OPRXc4bmA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.22kB (327765 bits)
Date Submitted	2017-03-30 00:00:00
Date Available	2017-03-30 00:00:00
Creation Date	2017-12-28 07:40:22
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-28 07:40:22
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	Administrator

Deng
Deng
Installation
Installation
How to set up WiFi Name and Password
Use Directions
1.ON/OFF and Diming
1.Connect the Encoder with any LAN port of router via network cable, and the other end
with AC power supply.
2.Connect the plug of the power cable with the ornament lamp and the other end with
the AC power supply. Turn on the power then connect to the WiFi of the from the
LAFI table lamp to enjoy the Lag-free game and HD videos with your devices freely.
Click the switch
button to turn on and click again to
turn off. Hold the switch
1.Open the browser and imput 192.168.31.1, press the Enter key enter the login
interface. Input the User Name: admin, Password: admin, press login.
button to enter the dimming mode. Brightness level will increase until maximum
level.Hold the switch
Status
User Manual
User Name
admin
Password
admin
Status
System
Network
Logout
LAN
Connect
Stop
Edit
Delete
WAN
Connect
Stop
Edit
Delete
WANG
Connect
Stop
Edit
Delete
No flicker
3. In the General Setup IPv4 address for IP address modification,
modify and click Save & Apply to take effect.
Interface
2.WiFi Switch
10 0 -2 4 0 V 5 0 -6 0 H z
Click the switch
to turn on the indicator and enable WiFi, click again to
WiFi
Interfaces-LAN
Firewall
Common Configuration
General Setup
turn
SSID
Disable
Remove
Edit
Wireless Security
ESSID
AC plug
MAC-Filter
Bling
Save Reset
Status
Network
* Correctly install and use the LAFI bed lamp according to the above method and
enjoy your journey of fast Internet access.
No radiation
Color Temperature: 2700K-6500K
Dimmer: Touch dimmer
Luminance Flux: 350lm
Rated Input: 100-240V-50/60Hz 0.09A
Dimension: Φ100*220mm
Rated Power: 12W
Weight: 1300g
Work Temperature: -25 - + 45℃
Service Life: 20000 hours
IP: 192.168.31.1
1.Please use the product with the rated voltage;
Encryption
WPA2- PSK
Algorithm
auto
3.Keep away from water for avoiding product damage;
Reboot
MAC-Filter
4.Keep away from high temperature and fire source;
2.Setup the password, confirm the password, click Save & Apply to take effect.
5.Do not cover the bed lamp with cloth and quilt for avoiding affect heat dissipation.
Password
Password
Save & Apply Save
Reset
Confirmation
Save & Apply
Low luminance decay
Basic Parameters
2.Do not attempt to dismount or repair the product for avoiding damage;
Backup/Flash
Wireless Security
Excellent head dissipation
Low power consumption
Cautions
Logout
Administration
General Setup
* It is suggested to put it on the bedstand or table.
System
System
Interface Configuration
Encoder
Firewall Settings
1.Click System, choose Administration .
Save & Apply
* Modify WiFi Password-no less than 8 letters (it is recommended to use WPA-PSK or WPA2-PSK encryption)
Power adapter
Eye-protection
How to modify the Administrator Password
Interface Configuration
General Setup
Physical Settings
19 2. 16 8. 31. 1
Save & Apply
* Modify WiFi Name
AC Port
Advanced Settings
Ipv4 Address
off the WiFi and the indicator lights off.
Network
Cable
Dimmable
Eco-riendly
2.Click LAN to modify .
, enter into WiFi interface, and click the modifying item.
1 0 0 - 24 0 V 5 0 - 60 H z
Logout
Firewall
Reset
2.Click Network
Thank you for selecting Deng WiFi-LAFI bed lamp series, this product is the new generation
and intelligent household product by adopting advanced LED lighting and intelligent
communication technology, and is capable of providing perfect lighting experience and fast
and stable WiFi as the perfect intelligent product to solve the network coverage issue for the
intelligent household product in the future.
Network
WiFi
Authorization Required
Please input your user name and password.
Login
Please read the User Manual carefully before operating this product.
System
Interface
also remain the same when you turn it on the next time due to its memory function.
FAQ
* Note: Non-professionals do not arbitrarily modify the data, this situation only when the device exists IP conflict operation!
192. 168. 31. 1
Router
Features
,enter into Interface .
1.Click Network
button again, the brightness level will decrease until
minimum level. Brightness level will remain the same after touch adjustment and
How to modify the IP Address
FCC INFORMATION
Warranty Voucher
Ask: LAFI bed lamp can be used in the Power Strip? Will be interfered by other
electrical signals?
In order to get a better Internet experience, it is recommended to plug the
encoder and bed lamp to the wall plug or AC power directly, and avoid to use
the high power appliances such as blower, microwave oven and charger etc.
Ask: The indicator of LAFI bed lamp keeps on but can't access Internet, what
shall I do?
1.Make sure the encoder is properly connected with the LAN port of the router.
2.Make sure that your phone and notebook can access Internet normally when
connecting with the WiFi of router.
Ask: What can I do if I browse 192.168.31.1 but can't enter the Web management
interface?
1.Make sure your phone or computer is connected with the WiFi of bed lamp and
has obtained the IP address.
2.Try to cut off supply and reboot the router and encoder, connect the bed lamp
and access “192.168.31.1” again.
Ask: How to recover the LAFI bed lamp to default settings?
Use a pin to hold down the Reset button of the bed lamp for over 8s to recover
the bed lamp to default settings. After resetting, your personal data will be
cleared since it will also be reset , please be cautious when using this function. If
it has recovered default settings, please configure according to the above steps.
Ask: Can the LAFI bed lamp be used in the factory, office and hotel?
It is not suggested because most factories and offices adopt 3-phase power
supply, it is difficult to keep the encoder and the LAFI bed lamp at the same phase,
the hotel has complicated power circuit, and it is difficult to keep the encoder and
the LAFI bed lamp under the same ammeter.
Warranty Terms
Commitments on after service of LAFI bed lamp:
Within the warranty period, the product fault which is not caused by manmade damage may enjoy the
following “Three-Guarantee” services
1.Within 7 days after you have received the product, if LAFI bed lamp has the
performance faults which are listed in the “LAFI bed lamp Commodity
Performance Fault List”, after tested and confirmed by our After Service
Center, you may select to return or replace the product of the same model
without any charge;
2.Within 8-15 days after you have received the product, if LAFI bed lamp has
the performance faults which are listed in the “LAFI bed lamp Commodity
Performance Fault List”, after tested and confirmed by our After Service
Center, you may select to replace the product of the same model or require
repair service without any charge;
3.Within 12 months after you have received the product, if LAFI bed lamp has
the performance faults which are listed in the “LAFI bed lamp Commodity
Performance Fault List”, after tested and confirmed by our After Service
Center, the product enjoys free repair services.
Non-Warranty Terms
The product shall not enjoy “Three-Guarantee” services for the followings (including but not
limiting to):
1.Without “Three-Guarantee” voucher or valid invoice, or the product has
expired the “Three-Guarantee” services;
2.The product is not used, maintained and stored according to the User
Manual;
3.The product is damaged caused by fire, flood, lightning strike and force
majeure;
4.The model or code listed on the Warranty Voucher is not accordant with the
real product;
5.The normal decoloring, wear and consumption of the product are not covered
in the warranty service.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
Ask: The WiFi signal is transmitted via power circuit, if the neighbor can receive
the signal from the power circuit?
Impossible, the network signal only transmit under the same ammeter to provide
the safe, stable and fast network.
Ask: Can the product only be used for one encoders? What shall I do if several
rooms are covered with WiFi?
One encoder can be used for 6 LAFI bed lamp or BUFI bulb, which means you
only need to purchase one encoder for 6 LAFI bed lamps.
* This Warranty Voucher is only applicable to the China region.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:42f3f9ce-9db0-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:10 17:17:55Z
Create Date                     : 2017:07:10 17:17:55Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:42f3f9ce-9db0-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools