Blocks wearables BLKS001 Smart Watch User Manual Blocks 0808 key

Download:
Mirror Download [FCC.gov]
Document ID	3139229
Application ID	+ZqI3uqMUOYavICifERe0A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	444.36kB (5554504 bits)
Date Submitted	2016-09-20 00:00:00
Date Available	2016-09-22 00:00:00
Creation Date	2016-08-15 09:41:04
Producing Software	Mac OS X 10.11.5 Quartz PDFContext
Document Lastmod	2016-08-15 09:41:04
Document Title	Blocks user manual_0808.key
Document Creator	Keynote

User Manual
FCC ID: 2AHBVBLKS001
S/N: 2121531119A1
M/N: BLKS001
Blocks Proprietary and Confidential ©
1.Get Start
Physical button
Tap
Tap and hold
Tap and hold
When the button is pressed
for less than one second, and
the watch is in the Active
state, the watch enters the
passive state (Ambient Mode).
When the watch is in the
passive state, the watch
enters the active state.
When user tap and hold
the button over 2 sec,
activate the settings
overview
Holding button for longer
than 10 sec to restart the
device.
Display
Long press to change the watch face
Here are the gestures you need to use its apps. The BLOCKS display not only
responds to touch-based gestures, it also responds rotate gesture.
Tap
Long Press
Rotate
> 1 sec
> 1.5 sec
Rotate
clockwise
Rotate
counter clockwise
> 2 sec
Swipe
Swipe up
Drag
Swipe right
Blocks Proprietary and Confidential ©
Swipe left
Swipe down
Drag down
Drag right
Drag left
Drag up
2.Watch faces
You can customise the Blocks watch face for the functions you need.
Change the watch face
watchface 1
long press the display, then swipe to see the
faces. Tap to select.
Customize containers
75%
watchface 1
long press the container, then swipe to browse.
Tap to select.
Blocks Proprietary and Confidential ©
3.Settings
Long press physical button to call out settings. You can glance the watch status, set
up the wireless/network, personalised and OTA update.
Settings overview
You can see the battery, wifi and bluetooth status, also quick access power, do not
disturb and BLOCKS module app.
Blocks Proprietary and Confidential ©
Settings page
Tap the gear icon to setting pages, swipe to 3 main categories. In each category,
scrolling for details.
1. watchface picker
2. wifi
3. wifi setting
4. bluetooth
5. always on display
6. display brightness
7. notification vibrations
8. notification blacklist
9. notification options
10. battery
11. time and date
12. change language
13. input and keyboard
14. system update
15. factory reset
16. restart
17. power off
18. about
Blocks Proprietary and Confidential ©
4.App Drawer
A list of Full Screen Containers are displayed in a circular list that can be moved
through by using the rotate gesture. The ordering and number of Full Screen
Containers available on the screen at once will be finalized upon user testing.
Blocks Proprietary and Confidential ©
5. Notification
The list of all active notifications are available via an edge swipe from the top in any
watch face or full screen application.
Blocks Proprietary and Confidential ©
6.Module app
Open BLOCKS module app in app drawer, swipe to see the module information.
Show the number of module be
connected.
2 Module
Connected
Ba#ery
Programmable
Bu-on
Module overview
Heart Rate
GPS
Blocks Proprietary and Confidential ©
Flashlight
Adventure
7.Battery
Check remaining power 1. Go to settings and check the battery power. 2. You can
add battery indicator to watch face.
75%
25%
Tap battery icon to check the battery status, when battery module connected, then
display core battery + module battery.
Core watch battery
100
100%
100%
Core Ba)ery
Ba#ery
30 min to full
Show the battery status
100
Connect to extra battery
Show core and extra
battery status
100
CPU Usage
on ba,ery
CPU Usage
on ba,ery
Swipe up to show the
percentage of CPU
usage on battery
Swipe up to show the
percentage of CPU
usage on battery
Blocks Proprietary and Confidential ©
8.Connect and disconnect module
Module is the core of BLOCKS. For now we have adventure, GPS, Programmable
button, Heart rate, Flashlight and battery module.
GPS
Connected
First time to connect the module, will show you the relative app lists, the you can
find those app in app drawer with a module icon. You can go to control centre open
the module app to check the status. Finally open companion app to add the app
container to your watch face.
2 Module
Connect
Pop up notification when
connect
GPS
2 Module
Connect
Ba#ery
descrip,on descrip,on
descrip,on
descrip,ondescrip,on
descrip,on
When display the pop up window then scroll up to see further
informations.
Programmable Bu-on
descrip4on descrip4on
descrip4on
descrip4ondescrip4on
descrip4on
Blocks Proprietary and Confidential ©
10
Module disconnection
GPS
Connected
Module disconnect will show the pop up window, then display the relative app will
be disabled.
2 Module
disconnect
Connect
Pop up notification when
disconnect
GPS
2 Module
disconnect
Ba#ery
descrip,on descrip,on
descrip,on
descrip,ondescrip,on
descrip,on
When display the pop up window then scroll up to see further
informations.
Programmable Bu-on
descrip4on descrip4on
descrip4on
descrip4ondescrip4on
descrip4on
Blocks Proprietary and Confidential ©
11
9.Heart rate
Wearing Heart rate module on your wrist. keep comfortable and steady, waiting
around a minute.
20
START
bpm
Heart Rate
Tap to start check the heart rate. Will show the result in 10 sec.
Average
Frequency
80bpm
20
START
Heart
Rate
10:30 am
11:00 am
11:30 am
STOP
STOP
Heart Rate
12:00 am
80bpm
79bpm
76bpm
70bpm
Set the frequency to start, and stop to show the history data.
Couldn’t get it
check your watch
placement, keep
your arm still.
RETRY
If cannot detect the heart rate, you might need to check
your watch placement and keep arm still.
Blocks Proprietary and Confidential ©
12
10.Adventure
Adventure module can detect the humidity, pressure, Altitude, external temperature
and compass. The result to remind people to have a water if it too dry, or if the
pressure quite low, means it will raining soon.
20
%rH
Humidity
10
°C
Scroll up/ down to see the informations
Temperature
20
inHg
Barometric
Blocks Proprietary and Confidential ©
13
Tap to start tracking, tap again to stop then show the history
Average
00:04
START
STOP
Adventure
Adventure
20 %rH
Humidity
Average
10 °C
Temperature
Average
20 inHg
Barometric
Average
330,
Al#tude
Blocks Proprietary and Confidential ©
14
11.Flashlight
After connect to flashlight sensor, user can open the app to turn on/ off. or scroll up
to start strobe.
OFF
ON
Flashlight
Flashlight
Strobe for 5s
Strobe for 5s
Blocks Proprietary and Confidential ©
15
12.GPS
Have GPS module can show your location and distance without phone.
Start tracking the distance. Tap to start, tap again to stop, then show the results.
Distance
START
STOP
Speed
100 km
20 km/h
Coordinates
25.0397033,121.4398929
GPS
GPS
25.0397033,121.4398929
25.0397033,121.4398929
Or scroll up to show the current GPS location.
SHOW
25.0397033,121.4398929
Current GPS
RETRY
Blocks Proprietary and Confidential ©
16
13. Programmable button
Programmable button for you free to decide what action you like for this button.
Could be a shortcut to launch an app.
For first time use. On watch offer to set the button as a shortcut to launch a watch
app. for advance setting please open the companion app.
Tap
This button is
empty, try add
someting
Tap
Set up launch
Flashlight APP
CONFIRM
ADD
CANCEL
Or Tap the module will have a pop up window, you can also set up via taping the
window.
Tap
This button is
empty, try add
someting
ADD
After set up, tap the module to test the function (toggle flashlight as a example)
OFF
Flashlight
Blocks Proprietary and Confidential ©
17
Reset the button
Open Programmable button to see the current function, and tap reset to start the
reset process.
Tap
Tap
Set up launch
APP
CONFIRM
RESET
CANCEL
Tap test
Scroll up for the tap test.
RESET
Blocks Proprietary and Confidential ©
18
14. Connect / disconnect module, adjust Clasp and How to charge
Connect module
Disconnect module
Clasp and Fit
How to charge
Blocks Proprietary and Confidential ©
1. slide in the core
2. Press the button and push
core into the charging dock
3. Plugin the usb cable
19
FCC compliance statement
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation of
the device.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and
your body.
Blocks Proprietary and Confidential ©
20
The symbol above means that according to local laws and regulations your product and/or its battery shall be
disposed of separately from household waste. When this product reaches its end of life, take it to a collection
point designated by local authorities. The separate collection and recycling of your product and/or its battery
at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
台灣 廢電池請回收
This device has been tested to and conforms to the regulatory requirement of the European Union and has
attained CE marking. The CE Mark is a conformity marking consisting of the letters ‘CE’. The CE Mark applies
to products regulated by certain European health, safety and environmental protection legislation. The CE Mark
obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his
product in European market.
This product conforms to the essential requirement of the R&TTE directive 1999/5/EC in order to attain CE
Marking.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product.
Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary.
Blocks Proprietary and Confidential ©
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 21
PDF Version                     : 1.4
Title                           : Blocks user manual_0808.key
Producer                        : Mac OS X 10.11.5 Quartz PDFContext
Creator                         : Keynote
Create Date                     : 2016:08:15 09:41:04Z
Modify Date                     : 2016:08:15 09:41:04Z

EXIF Metadata provided by EXIF.tools