Blocks wearables BLKS002 Modular Smartwatch User Manual Blocks 1011 key
Blocks wearables Inc. Modular Smartwatch Blocks 1011 key
User Manual
User Manual FCC ID: 2AHBVBLKS001 FCC ID: 2AHBVBLKS002 S/N: 2121531119A1 M/N: BLKS002 M/N: BLKS001 Blocks Proprietary and Confidential © 1. Get Start Physical Button To turn on your BLOCKS watch for the first time, hold the home button for 1 second. You will be greeted by the start up screen shortly, follow the tutorial on the home screen to complete the setup of your device. Gestures Tap Long Press Rotate > 1 sec > 1.5 sec Rotate clockwise Rotate counter clockwise > 2 sec Swipe Swipe up Drag Swipe right Blocks Proprietary and Confidential © Swipe left Swipe down Drag down Drag right Drag left Drag up 2. Watch faces You can customise the Blocks watch face for the functions you need. Change the watch face 28% Blocks carbon 70 bpm Long press and swipe to browse the watch faces. Customize containers 28% 70 bpm Long press a container, then swipe to browse. Tap to select. Blocks Proprietary and Confidential © 3. Notification Swipe down to view unread notifications Blocks Proprietary and Confidential © 4. Quick settings Swipe up for quick settings: Adjust brightness, mute/unmute, Bluetooth, Wifi control and Battery status Mute/unmute 50 Battery Brightness Blocks Proprietary and Confidential © Battery Settings App Drawer WiFi and Bluetooth 5. App Drawer Swipe up to the settings glance, then tap the App drawer button. Blocks Proprietary and Confidential © 6. Settings Swipe up to the settings glance, tap gear icon to settings 6.1 Settings Watchface picker / Wi-Fi / Wi-Fi settings / Airplane mode Watchface picker Toggle: Wi-Fi on/off Network list WiFi status Toggle: Airplane mode on/off Blocks Proprietary and Confidential © 6.2 Settings Bluetooth Reconnect the device Turn on/off Bluetooth Set up the Bluetooth internet tethering Keep tethering active on/off Start pairing Blocks Proprietary and Confidential © 6.3 Settings Always on display / Display brightness / Adjust volume / Notification Toggle:Always on display on/off Adjust brightness Switch auto brightness on/off Adjust the volume of music, notification, and alarm. Switch silent mode on/off Notification vibration setting Turn on/off tilt watch turning on screen to see notification Edit blocked notifications Blocks Proprietary and Confidential © 10 6.4 Settings Battery / Time & date / Change language / System update 50 Battery status Battery Time and date setting Change language Change keyboard Check system update Blocks Proprietary and Confidential © 11 6.5 Settings Battery / Time & date / Change language / System update Factory reset Restart Power off Tutorial mode About this device: Blocks Proprietary and Confidential © • Device model • Device name • Serial number • Build • Os version • Open source licenses • WiFi MAC address • Bluetooth MAC address 12 7. Battery Check remaining power: 1. Swipe up on the watch face to setting glance. 2. Add the battery container to your watch face. 12 CORE 70 Tap battery icon to check the battery status: Core battery 50 Connect to extra battery 100 % 100 % Battery Show the core battery status Blocks Proprietary and Confidential © Core Battery 30 min to full Show core and extra battery status 13 8. VU Meter Environmental noise monitor 9.Alarm Alarm setting 10. Houndify Voice assistant It is 5:34 pm in London, United Kingdom. Blocks Proprietary and Confidential © 14 11. Stopwatch Start, stop and reset 12. Set Counter Show the steps you take throughout the day. 13. Timer Rotate to set the time, press start to countdown. Blocks Proprietary and Confidential © 15 14. Weather Check the weather 15. Calendar Upcoming events Design team sync Blocks Proprietary and Confidential © 16 16. Tutorial Enter tutorial mode to learn gestures Start Swipe to view Tap a container for quick launch Swipe right to exit Swipe down to see notification Notification page Swipe right to dismiss Swipe left to snooze Swipe up for quick settings Blocks Proprietary and Confidential © 17 17. Music User can add Music control containers on watch face to play/pause and play next song Tap music icon to music control app Blocks Proprietary and Confidential © 18 FCC compliance statement Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm is 0.42W/Kg(Wrist) and 10mm is 0.30W/Kg(mouth). This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AHBVBLKS002 Blocks Proprietary and Confidential © 20 The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. 台灣 廢電池請回收 This device has been tested to and conforms to the regulatory requirement of the European Union and has attained CE marking. The CE Mark is a conformity marking consisting of the letters ‘CE’. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation. The CE Mark obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in European market. This product conforms to the essential requirement of the R&TTE directive 1999/5/EC in order to attain CE Marking. The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary. Blocks Proprietary and Confidential © 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:10:13 03:42:12Z Creator : Keynote Modify Date : 2017:12:07 09:42:29+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : Keynote Metadata Date : 2017:12:07 09:42:29+08:00 Producer : Mac OS X 10.12.6 Quartz PDFContext Format : application/pdf Title : Blocks user manual_1011.key Document ID : uuid:480ab977-0eb7-4735-a1e9-4d30c6a8f991 Instance ID : uuid:9c2c319b-5a60-408c-81e8-dafd4eee491f Page Count : 20EXIF Metadata provided by EXIF.tools