Blue Tower Communications PTRANSPONDITV1 Water Meter Transmitter User Manual 295100

Download:
Mirror Download [FCC.gov]
Document ID	295100
Application ID	nWP1hx/LCs+/QAGISBKoXA==
Document Description	Users Manual Revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	66.6kB (832513 bits)
Date Submitted	2003-01-10 00:00:00
Date Available	2003-01-10 00:00:00
Creation Date	2003-01-10 17:14:29
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-01-10 17:14:29
Document Title	Microsoft Word - 295100.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	fcc

900 Series Installation Instructions
Pit TransPondIT Model 915-56-21
Description
Configuration
PIT INSTALLATION ONLY
The Pit TranspondIT Model 915-56-21 is designed for pit
installations only and attaches to the Pro Read  / AutoDetect
water meter which has an electronically encoded output . The Pit
TranspondIT sends meter data via RF radio signal to a receiving
®
®
®
unit called HandTrackIT , FastTrackIT , or CellTrackIT .
Caution:
This product is designed to be installed in a pit below
finished grade. It is not to be used for any other purpose.
Changes or modifications not expressly approved by
Advanced Technology RAMAR Ltd could void the user’s
authority to operate the equipment.
The Pit TranspondIT user parameters are set with the ConFigIT
box. The following picture illustrates typical configuration settings
for the Pro Read / AutoDetect meter.
ConFigIT Screen Settings
Required Tools and Equipment
The following items are recommended for proper installation of
the Pit TranspondIT:
®
•
3M Type UY2 gel-filled splice connectors and crimping
pliers
®
®
®
•
Computer running Windows 2000 , Win98 or NT
®
•
ConFigIT Device & ConFigIT Software Version 6.0
•
ConFigIT Cable Part Number 330-190-10(Lemo) or 320300-10 (RS232)
•
4 AA batteries or power cable
•
HandTrackIT, FastTrackIT, or CellTrackIT receiver with
connecting cable
Wire Connections - ProRead / AutoDetect
Installation Procedure
1.
2.
3.
4.
Wire 1
Wire 2
Wire 3
5.
Connect the Pit TranspondIT to the meter register
®
using 3M Type UY2 gel-filled splice connectors.
Configure the Pit TranspondIT using the ConFigIT
device. Refer to the ConFigIT Manual v 6.0 for
detailed information on setting the pre-scale value and
other user specific parameters. (NOTE: The meter
interface must be set to ProRead / AutoDetect.)
Mount the Pit TranspondIT using approved mounting
methods. Position the Pit TranspondIT so that the
front of the unit faces the direction of the receiver.
Verify that the signal is received with the appropriate
receiving device from the desired location.
Verify that the reading corresponds to the visual
indication on the meter register.
123
Pro Read/ AutoDetect Water Meter
123
Wire Connections – Single Pulse
Pulse Output
Ground
Tamper
– Wire 1
– Wire 2
– Wire 3
Transmitter
The transmission can be configured for different intervals. The
default interval is 5 seconds. (Refer to the detailed ConFigIT
operating instructions for more information.)
Warnings and Precautions
This sheet provides instructions needed to successfully connect,
configure, and read the Pit TranspondIT meter interface unit
(MIU) to the Pro Read / AutoDetect water meter. This guide is
merely a supplement to formal training in the operation of
RAMAR 900 Series AMR equipment. For training information,
email training@ramartech.com.
FCC Information
The Pit TranspondIT has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio or television reception, which can be determined by
turning the equipment on and off, the user is encouraged to try to
correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna
--Increase the separation between the equipment and
receiver
AT RAMAR LLC PO Box 110127 Research Triangle Park, NC 27709 Toll Free: 1-888-98-RAMAR
© 2002 AT RAMAR LLC. All rights reserved. RAMAR, the AT RAMAR LLC logo, TransPondIT, ConFigIT, HandTrackIT, FastTrackIT and CellTrackIT are trademarks or registered
trademarks of Advanced Technology RAMAR Limited in the United States and/or other countries. All other company names, brand names, and product names are the property of their
respective holder(s). AT RAMAR LLC is an Agent for AT RAMAR Ltd. RAMAR reserves the right to change specifications or other product information without notice. This publication could
include technical inaccuracies or typographical errors. May 2002
Instruction Sheet P/N
900 Series Installation Instructions
Pit TransPondIT Model 915-56-21
Typical Pit Mounting Examples
Example 3: Round Meter Box
The Pit TranspondIT is only approved for use in these types
of below grade installations.
Placement of the Pit TranspondIT within the enclosure is
important for satisfactory performance. By following these
examples, optimum results will be achieved.
Example 1: Obround Yokebox
The round meter box includes three metal castings; a base, body
and lid. It measures 10.5“ wide by 13” deep, inside dimensions.
The Pit Transpondit is mounted in a vertical manner at the top of
the pit with the unit facing the direction of the reader.
The Yokebox includes three metal castings; a base, upper body
and lid. The units measures 10 5/8” long by 7 1/8” wide by
11” deep.
The Pit Transpondit is mounted in a vertical manner above the
water line with the unit facing the direction of the reader.
Example 2: Square Hand Hole
The Square Hand Hole includes three metal castings; a base,
cylindrical body and square lid. The unit measures 7” wide by 12”
deep. The Pit Transpondit is mounted in the center of the bottom
of the pit with the unit facing the direction of the reader.
AT RAMAR LLC PO Box 110127 Research Triangle Park, NC 27709 Toll Free: 1-888-98-RAMAR
© 2002 AT RAMAR LLC. All rights reserved. RAMAR, the AT RAMAR LLC logo, TransPondIT, ConFigIT, HandTrackIT, FastTrackIT and CellTrackIT are trademarks or registered
trademarks of Advanced Technology RAMAR Limited in the United States and/or other countries. All other company names, brand names, and product names are the property of their
respective holder(s). AT RAMAR LLC is an Agent for AT RAMAR Ltd. RAMAR reserves the right to change specifications or other product information without notice. This publication could
include technical inaccuracies or typographical errors. May 2002
Instruction Sheet P/N

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2003:01:10 17:14:29-08:00
Modify Date                     : 2003:01:10 17:14:29-08:00
Page Count                      : 2
Creation Date                   : 2003:01:11 01:14:29Z
Mod Date                        : 2003:01:11 01:14:29Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : fcc
Metadata Date                   : 2003:01:11 01:14:29Z
Creator                         : fcc
Title                           : Microsoft Word - 295100.DOC

EXIF Metadata provided by EXIF.tools