Bluecard Technologies BP-2012S Guard Tour Reader User Manual BP 2002S Guard Tour Reader Usage Manual

Download:
Mirror Download [FCC.gov]
Document ID	3068822
Application ID	Y8ZFx6J39X+kSlknLDD58g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.66kB (420705 bits)
Date Submitted	2016-07-19 00:00:00
Date Available	2016-07-24 00:00:00
Creation Date	2016-06-03 16:34:20
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-06-13 11:39:40
Document Title	BP-2002S Guard Tour Reader Usage Manual
Document Creator	Acrobat PDFMaker 11 Word 版
Document Author:	wanglu

ENGLISH
Inductive Guard Tour Reader Usage Manual
BP-2012S Guard Tour Reader
BP-2012F Guard Tour Reader
Please read this manual carefully, before starting to operate the reader.
Main Features
BP-2012S/BP-2012F Guard Tour Reader employs inductive data collection (RFID), and
single-chip manufacturing technologies. It conveniently operates without needing a button, and
automatically detects and reads radio-frequency ID cards. The BP-2012S/BP-2012F product is
used to collect relevant patrol information at set points such as route, guard, location, time, and
events, then upload them to the PC for processing and verification.
The main different between BP-2012S and BP-2012F is the BP-2012F has a LCD display window.
First-Time Usage
Before reading signal cards, first connect with the PC and start the software to calibrate the
reader’s internal clock. Wait until it automatically shuts down before performing readings. After
calibrating, please initialize the reader to make sure the reader does not have any useless records.
Operation Instructions
BP-2012S
Turning On and Off
The system will turn on automatically to perform card reading when it is within the range of a
valid signal card. It will automatically shut off when card reading is complete.
Reading Cards
Position a card in front of the blue reading head. 4 flashes of the red indicator light accompanied
by 1 “beep” sound means that a reading has been made.
BP-2012F
Turning On and Off
The system will turn on automatically to perform card reading when it is within the range of a
valid signal card. It will automatically shut off when card reading is complete.
Reading Cards
Position a card in front of the blue reading head. 4 flashes of the red indicator light accompanied
by 1 “beep” sound means that a reading has been made. The BP-2012F will display the last four
digits of the signal card’s hexadecimal ID number. For example:
This number can be later referred to during status indications (see page 4).
Status Indications
BP-2012S
1 Beep With 4 Flashes
Reading is successful.
After Reading a Card, 4 Beeps With 4 Flashes
The reading was not successful. The reader memory is full, the data needs to be uploaded before
more readings can be made.
After Reading a Card, 1 Beep With 4 Flashes, Followed By 4 Beeps With 4 Flashes
The reading was successful, but the reader’s internal clock should be calibrated with the PC before
further readings are made
After Reading a Signal Card, The LED Light Flashes Continuously
The battery is low and needs to be changed.
After Reading a Signal Card, 1 Beep with 4 Flashes Followed by 8 “Beep” Sounds With 8 Flashes
of the LED
There is an error within the reader. It needs to be connected with the computer, have its data
uploaded, then initialized.
BP-2012F
A display of the current time.
(If a card reading has just been made, is accompanied by 4 beeps with 4 flashes of the
LED.) The reader’s memory is full. It needs to upload its data before further readings can be
performed.
(If reader makes 4 beeps with 4 flashes of LED, when the reader just has been turned
on.) The reader’s internal clock needs to be calibrated with the PC before further readings can be
made
After Reading a Signal Card, The LED Light Flashes Continuously
The battery is low and the reader needs a new battery.
After Reading a Signal Card, 1 Beep with 4 Flashes Followed by 8 “Beep” Sounds With 8 Flashes
of the LED
There is an error within the reader. It needs to be connected with the computer, have its data
uploaded, then initialized.
Data Upload
BP-2012S/BP-2012F reader could upload the data via communication station from BS-1000,
BS-2000, BS-3010/BS-3010M, BS-3300, BS-4000/BS-4000M, BS-6000. Please keep rest of the
BP-2012S, BP-2012F readers and EM Cards at lest one foot away from the stations when the
readers in the uploading process.
BS-1000
Connect the BS-1000 wireless communication station to the PC, and place the
BP-2012S/BP-2012F guard tour reader in its indentation. The reading head of the
BP-2012S/BP-2012F should be between the status lights of the BS-1000, and its top should be
flush against the inside edge of the BS-1000. The “Connect” window should be started in the PC
software, and the data upload process will be automatically started.
BS-2000
Turn on the BS-2000 by turning on the power switch. Place the BP-2012S/BP-2012F guard tour
reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the
status lights of the BS-2000, and its top should be flush against the inside edge of the BS-2000.
The data upload process will be automatically started. All of the data will be uploaded into the
station.
BS-3010/BS-3010M
Turn on the BS-3010 by turning on the power switch or attaching a power source. Place the
BP-2012S/BP-2012F guard tour reader in its indentation. The reading head of the
BP-2012S/BP-2012F should be between the status lights of the BS-3010, and its top should be
flush against the inside edge of the BS-3010. The data upload process will be automatically started.
All of the data will be uploaded into the station.
BS-3300
Turn on the BS-3300 by attaching a power source. Place the BP-2012S/BP-2012F guard tour
reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the
status lights of the BS-3300, and its top should be flush against the inside edge of the BS-3300.
The data upload process will be automatically started. All of the data will be uploaded into the
station.
BS-4000/BS-4000M
Turn on the BS-4000 by attaching a power source. Place the BP-2012S/BP-2012F guard tour
reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the
status lights of the BS-4000, and its top should be flush against the inside edge of the BS-4000.
The data upload process will be automatically started. All of the data will be uploaded into the
station.
BS-6000
Turn on the BS-6000 by attaching a power source. Place the BP-2012S/BP-2012F guard tour
reader in its indentation. The reading head of the BP-2012S/BP-2012F should be between the
status lights of the BS-6000, and its top should be flush against the inside edge of the BS-6000.
The data upload process will be automatically started. All of the data will be uploaded into the
station.
Miscellaneous
After communicating with the PC, the BP-2012S/BP-2012F will become capable of reading signal
cards after 5 seconds.
The interval between signal card readings should be longer than 5 seconds.
Working As Card Reader
The BP-2012S/BP-2012F guard tour reader can be used as a standard signal card reader used for
various applications.
Troubleshooting
After reading a card, 1 beep with 4 flashings, followed by 4 beeps with 4 flashes
The reading was successful, but the reader’s internal clock should be calibrated with the PC before
further readings are made.
After reading a card, 4 beeps with 4 flashes
The reading was not successful. The reader memory is full. The data needs to be uploaded before
more readings can be made.
After reading a card, 1 beep with 4 flashes, followed by 8 beeps with 8 flashes
There is an error within the reader. It needs to be connected with the computer have its data
uploaded then initialized.
IMPORTANT: initialization function will remove all of the records saved in the reader.
The LED continuous flashes
The battery is low and needs to be charged. Please follow the “BP-2012S Reader Battery Change
Instruction” to change the battery.
Failed to upload data to the software and followed by 8 beeps with 8 flashes
There is an error when uploading data. It needs to be initialized. Important, all of the data saved in
the reader will be removed.
When the reader communicate with the software followed by 1 beep and 1flash
There is a hardware error within the reader. It needs to be returned to the manufactory.
Failed to scan signal card
Solution 1: after communicating with the PC, wait 5 seconds before starting to scan signal cards
again
Solution 2: make sure the signal card was not read within 5 seconds of the previous reading.
(when you finished once reading, please position the card out side of the reading range of the
reader.)
Solution 3: the reader’s memory may be full. Connect with a PC to upload data before scanning
more signal cards.
Solution 4: the reader may run out of the battery, please change the battery
Failed to communicate with PC
Solution 1: check to see if the PC software is opening properly, and whether it is set up to
communicate with the BP-2012S/BP-2012F.
Solution 2: make sure that the BS-1000 wireless communication station is properly connected to
the PC, and that it has been found by the PC software.
Solution 3: check to see if the BP-2012S/BP-2012F is placed properly on the BS-1000. The
reading head of the BP-2012S/BP-2012F should be between the status lights of the BS-1000, and
its top should be flash against the inside edge of the BS-1000.
Failed to scan signal card, and failed to communicate with PC
The reader may run out of the battery, please change the battery.
The data has been successfully uploaded, but there is not data in Shift Report and Patrol Details
If the data has been successfully uploaded, which could provide the reader is working properly.
Please go to the “Basic Report” to inquiry the report. If the basic report can be generate properly,
you could go to the “Reprocess” function to process the data and then inquiry the report in Shift
Report and the Patrol Details.
Failed to calibrate the reader clock
Please initialize the reader and then calibrate the reader clock.
IMPORTANT: initialization function will remove all of the records saved in the reader.
“Failed to transfer data” message comes out in the records uploading process.
When you are uploading the records from BP-20002S or BP-2012F reader into software via
BS-1000, please keep rest of the BP-2012S, BP-2012F readers and EM Cards at lest one foot
away from the BS-1000 station. Please refer to the following picture for the details
Further on the above issue when you upload the record from BP-2012S or BP-2012F via BS-2000,
BS-3000/BS-3000M, BS-4000/BS-4000M, and BS-6000, also please keep rest of the BP-2012S,
BP-2012F readers and EM Cards at lest one foot away from the stations.
Please contact with the technology support if you can not solve the problem by using above
solutions.
10
BP-2012S Data Sheet
Card-Reading
Card Format
Maximum
Reading Range
(BlueCard Tags)
Power Capacity
Battery Type
Display
Shock
Absorbency
Waterproofing
Memory
Data Reliability
PC Connection
Working Temp.
Working Hum.
Dimensions
Weight
Inductive / Non-Contact
125 Khz EMID
Model
Size
Range
BLC-02
86mm×54mm
6.0cm
BLC-40
Φ40mm
4.0cm
BLC-30
Φ30mm
3.5cm
BLC-22
Φ22mm
3.5cm
BLC-6-28 Φ6mm×28mm
3cm
>330,000 Readings
CR123A 3v Single-Use Lithium
LED Status light
External: metal tubing, rubber shell. Internal:
silicone gel padding, epoxy resin. Tested to
withstand drops from 2 m (cement floor)
Completely Sealed
30,719 Records
Flash Memory, Stores Data Without
Electricity
Wireless Comm Station
-40°C to 70°C
0 to 95%
120mm×35mm×26mm
142g±5g
BP-2012F Data Sheet
Card-Reading
Card Format
Maximum
Reading Range
(BlueCard Tags)
Power Capacity
Battery Type
Display
Shock
Absorbency
Waterproofing
Memory
Data Reliability
PC Connection
Working Temp.
Working Hum.
Dimensions
Weight
Inductive / Non-Contact
125 Khz EMID
Model
Size
Range
BLC-02
86mm×54mm 6.0cm
BLC-40
Φ40mm
4.0cm
BLC-30
Φ30mm
3.5cm
BLC-22
Φ22mm
3.5cm
BLC-6-28
Φ6mm×28mm 3cm
>330,000 Readings
CR123A 3v Single-Use Lithium
LCD display, LED Status light
External: metal tubing, rubber shell. Internal:
silicone gel padding, epoxy resin. Tested to
withstand drops from 2 m (cement floor)
Completely Sealed
30,719 Records
Flash Memory, Stores Data Without
Electricity
Wireless Comm Station
-20°C to 70°C
0 to 95%
140mm×42mm×30mm
172g±5g
11
Battery Usage Guidelines
Always follow your battery manufacturer’s directions fully. Do not attempt to disassemble,
recharge, short circuit, or subject the battery to high temperature or fire.
Please be sure to read this manual thoroughly before use. Also,
refer to the manual of the equipment for which you see this
battery pack.
Failure to replace the batteries when they are low may cause the reader to shut down and stop to
reading the checkpoint cards.
NOT ALL BATTERIES ARE CREATED EQUAL! Battery life depends significantly on age,
usage conditions, type and brand.
DANGER!
 Keep the battery pack away from fire (or it might explode).
 Do not expose it to temperatures greater than 60℃(140
℉). Do not leave it near a heater or inside a car in hot
weather, for example.
 Do not try to disassemble or modify it.
 Do not drop or knock it.
12
Changing the Battery on the BP-2012S/BP-2012F Reader
NOTE 1: the battery type used on the BP-2012S reader is type CR123A, which can be purchased
in many convenience stores. Below is an example of the battery:
NOTE 2: BP-2012F use the exactly same way to change the battery. Please follow the instructions
to replace the BP-2012F battery.
Tools you need
OR
Please order this tool from your distributor.
1.
Lift up the label from the battery cover.
13
2.
Two round depressions are revealed beneath the label.
Round depressions
3.
Use needle-nosed pliers to hold onto the depressions and turn the battery cover
counter-clock wise.
4.
The battery cover is opened. Please note the location of the silicone-waterproofing ring.
If the ring is damaged during the battery replacement process, please replace it with the
spares provided. In addition, please note that the cathode (negative end) of the battery is
facing outwards.
5.
Silicone waterproofing ring
Open the battery cap and remove the battery (please refer to the document named
“BP-2012S Battery Change.doc” for more details). You should be able to see the battery
compartment of the reader, revealing its metallic battery contact.
14
6.
Remove the silicone shock-absorption pad from the inside wall of the battery
compartment. (Be sure to replace it after the completion of this process.)
7.
Create a circuit between the round metallic contact on the bottom of the compartment
and the compartment wall for approximately 2-5 seconds.
8.
Replace the silicone shock-absorption pad, the battery, and the battery cap. If the reader
makes a long beeping sound with LED flashing, it means the reader is resetting itself.
Please wait for one minute then test to see if the reader is working. If it is working
normally, please calibrate its time using the software before further usage.
9.
Use the pliers to install the battery cover. Please note the notch on the inside tubing of the
reader. The battery cover should go down to a same or lower level than the bottom of the
notch.
Notch
15
DISCLAIMER
The information in this documentation is subjective to change notice and does not represent a
commitment on the part of Bluecard Technologies Corp. No part of the this manual may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than
the purchaser’s personal use, without the written permission of Bluecard Technologies Corp.
All trademarks mentioned in the document, belong to their respective owners.
EU Compliance Statement:
The device complies with EU EMF Directive 1999/519/EC can be used in the European
Community.
“ Hereby, (Bluecard Technologies Corp.), declares that this (Guard Tour Reader ) is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.”
FCC Compliance Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1)This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Important: Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
16
SAR Exemption Statement :
This device measured RF output power is less than the SAR exclusion threshold value for
human head and body. Therefore, SAR test is not necessary.
Bluecard Technologies Corp.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : wanglu
Create Date                     : 2016:06:03 16:34:20+08:00
Modify Date                     : 2016:06:13 11:39:40+08:00
Subject                         : 
Language                        : ZH-HANS
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:06:13 11:39:40+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:d2a4346e-d63c-419b-b4ef-6bf3e9775642
Instance ID                     : uuid:4a201540-64c5-45e7-9ed3-1f7f9a02f3bb
Format                          : application/pdf
Title                           : BP-2002S Guard Tour Reader Usage Manual
Description                     : 
Creator                         : wanglu
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20160603083357
Company                         : bluecard
Manager                         : 
Comments                        : 
Category                        : 
KSO Product Build Ver           : 2052-10.1.0.5603
Page Layout                     : OneColumn
Page Count                      : 17

EXIF Metadata provided by EXIF.tools