Bosch FPD 7024 En Us Upgrading Special 2692411531
User Manual: Bosch en-us FPP-RNAC-8A-4C Power supply, RNAC 8A 24V
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
TECHNICAL BULLETIN Fire FPD-7024 Upgrading From D7024 or DS9400M/I Issue Severity: Products Affected: High: Act immediately Medium: Bosch Security Systems, Inc. strongly recommends you take the action(s) described below. Low: Advisory 1.0 August 19, 2011 FPD-7024 Control/Communicator D7024 Fire Alarm Control Panel (FACP) DS9400M/I FACP D7039/DS9431 Multiplex (MUX) Expansion Module D7033/FMR-7033/DS9447 LCD Keypad D7036/FMR-7036/DS9436 Fire Annunciator Keypad D7034/FPC-7034/DS9434 Four-Point Expander D7038/DS9484/FPP-RNAC-8A-4C Remote Notification Appliance Circuit Power Supply Detection Systems MUX devices Transformers Upgrading a D7024 FACP to an FPD-7024 Control/Communicator Use the table below to determine which D7024 FACP-compatible components you must replace when upgrading to an FPD-7024 Control/Communicator: D7024 Compatible Component D7039 Equivalent FPD-7024 Compatible Component D7039 with v1.04 firmware or newer. Description Multiplex Expansion Module NOTE: Do not use the FACP’s v2.07 EPROM (which shipped with older D7039 modules) in the FPD-7024 Control Communicator. D7033 FMR-7033 LCD Keypad D7036 FMR-7036 Fire Annunciator Keypad D7034 FPC-7034 Four-Point Expander D7038 FPP-RNAC-8A-4C Remote Notification Appliance Circuit Power Supply NOTE: Replace the D7038 with the FPP-RNAC-8A-4C if the D7038 is connected to the Options Bus. Replacement is not necessary if the D7038 is connected to the conventional NAC outputs of the FACP. Transformer (P/N: 29413), which has only two leads (black and white) Transformer with three leads (black, white, and yellow); use either (P/N: F01U008702 with short leads, or P/N: F01U033706 with long leads) NOTE: If ordering a transformer (P/N: F01U100228), call the Bosch Security Systems, Inc. Spare Parts number: 800-894-5215. Transformer 2.0 Upgrading a DS9400M/I FACP to an FPD-7024 Control/Communicator Use the table below to determine which DS9400M/I FACP-compatible components you must replace when upgrading to an FPD-7024 Control/Communicator: DS9400M/I Compatible Component DS9431 Equivalent FPD-7024 Compatible Component D7039 with v1.04 firmware or newer. Description Multiplex Expansion Module NOTE: Do not use the FACP’s v2.07 EPROM (which shipped with older DS9431 modules) in the FPD-7024 Control Communicator. DS9447 FMR-7033 LCD Keypad DS9436 FMR-7036 Fire Annunciator Keypad DS9434 FPC-7034 Four-Point Expander DS9484 FPP-RNAC-8A-4C Remote Notification Appliance Circuit Power Supply NOTE: Replace the DS9484 with the FPP-RNAC-8A-4C if the DS9484 is connected to the Options Bus. Replacement is not necessary if the DS9484 is connected to the conventional NAC outputs of the FACP. Transformer (P/N: 29413), which has only two leads (black and white) Transformer with three leads (black, white, and yellow); use either (P/N: F01U008702 with short leads, or P/N: F01U033706 with long leads) Transformer NOTE: If ordering a transformer (P/N: F01U100228), call the Bosch Security Systems, Inc. Spare Parts number: 800-894-5215. MX361 D7044 MUX Single-Input Module MX361M D7044M MUX Mini Single-Input Module MX465 D7053 MUX Input-Output Module MX363 D7052 MUX Dual-Input Module MX250 Series D7050 Series Addressable Smoke and Heat Detectors DS9432 D7042 Eight-Input Remote Module DS9432B D7042B Eight-Input Remote Module with Fire Enclosure MX310 FMM-7045 Series, or D7045 Series MUX Addressable Manual Stations © 2011 Bosch Security Systems, Inc. 130 Perinton Parkway, Fairport, NY 14450-9199 USA (800) 289-0096 TBF 11-16-09-02 Upgrading to FPD-7024 Technical Bulletin 8/11 FPD-7024 Page 2 of 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2011:08:19 10:09:01-04:00 Creator Tool : Acrobat PDFMaker 9.1 for Word Modify Date : 2011:08:19 10:09:07-04:00 Metadata Date : 2011:08:19 10:09:07-04:00 Producer : Acrobat Distiller 9.4.5 (Windows) Keywords : Upgrading From D7024 or DS9400M/I Format : application/pdf Creator : Ron Ford Title : FPD-7024 Description : Technical Bulletin Document ID : uuid:ba8e2171-a7fc-4e02-b6da-c56a4bd60eb8 Instance ID : uuid:502ec369-8d60-490c-b473-6143e11e5a83 Subject : 3 Company : Comments : TBF 11-16-09-02 Upgrading to FPD-7024 Category : Affects Source Modified : D:20110819140838 Headline : Technical Bulletin Page Layout : OneColumn Page Count : 2 Author : Ron FordEXIF Metadata provided by EXIF.tools