Bose 416549 2.4 and 5 GHz Wireless Module User Manual MANUAL AND LABELING REQUIREMENTS

Bose Corporation 2.4 and 5 GHz Wireless Module MANUAL AND LABELING REQUIREMENTS

User Manual

2.4GHz & 5 GHz RF Modular Transceiver System (Model 416549) Installation manual 1. Description This document describes an RF transceiver module supporting IEEE 802.11abgn WiFi protocols, Bluetooth and Bluetooth Low Energy specification. The module provides its own power regulation and shielding. 2. The module consists of: 1) 2.4 GHz Wi-Fi 802.11 b/g/n MIMO 2.) 2.4 GHz Bluetooth & Bluetooth Low Energy 3.) 5 GHz WiFi 802.11 a/n SISO with antenna diversity. 3. Cautions This transceiver module is ONLY to be installed in Bose Corporation devices. The module is to be surfaced mounted to a host printed circuit board with PCB etch type antennas only. There are no antenna connectors used. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate the equipment.” NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.
4. Markings 4.1 This module shall be identified with the following ID numbers on the radio shields. FCC ID : A94416549 IC : 3232A-416549 4.2 End Product Labeling The final end product which this module is used in must be labeled in a visible area with the following: "Contains FCC ID: A94416549 / IC:3232A-416549" 5. The following table describes the module line grid array footprint. 6. General Electrical specifications 6.1 Power supply 3.6V +/- 5% 6.2 Power consumption <5 Watts 6.3 Operational Temperature 0 ~ 40 C Pads 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31XGND (void) GND GND SPI_DO GND GND GND GND GND STROBE3 LED0 GND RMII1_RXERR RMII1_CRS_DV GNDRMII1_REFCLK_50MRMII1_TXD0 GND GND GND GND GND GND GND GND I2C1 _SDA GND GND (void) G ND XW(void)GND UART5_RXD GND GND BL_TXD GND GNDIR_IN_BL_RXDGND GND STROBE0 GND L ED1 GND RMII1_TXD1 GND GND EMU0 GND GND SM2_1V5 SM2_1V1 GND VDD_3V6_IN_2 VDD_3V6_IN_2 GND SM2_1V8 GND VDD_3V6_IN_2(void) WVGNDLED3_MICROB_SELUART5_TXD GND SP I_CLK GND RMII1 _TXEN GND GND GND GND GND EMU1 RMII1_RXD0 MDIO_DATA GND MDIO_CLK RMII1 _RXD1 GND SM2_1V8_2 GND GND GND GND GND GND I2C1_SCL GND GND VDD_3V6_IN_2GND VU(void)NNMI GND (void) (void) (void) (void) (void) (void) (void) (void) (void) (void) GND ETAP_TXD (void)LED2_MICROB_DETSWITCH0NNF_GPMC_AD7NF_GPMC_AD2NF_GPMC_AD4(void) (void) (void) (void) (void) ( void) (void)GND VDD_3V6_IN_2(void) UT(void)ETAP_RXD NRESETIN_OUT (void) (void) (void) (void) (void) (void) (void) (void) (void) (void) USB0 _DRVVBUS GND (void) SWITCH2 N STROBE1NF_GPMC_AD5NF_GPMC_AD1NF_GPMC_AD3(void) (void) (void) (void) (void) ( void) (void)GND VDD_3V6_IN_2(void) TSGND SYNC_OUT GND (void) (void) (void) (void) (void) (void) (void) (void) (void) (void) SWITCH1N C18 _WIFI_EN (void) C18 _BT_EN STROBE2NF_GPMC_AD6NF_GPMC_AD0 (void) (void) (void) (void) (voi d) (void) (void) (void) GND PMIC_EN GND SR(void)GND GND (void) (void) (void) (void) (void) (void) (void) (void) (void) ( void) SWI TCH3N GND (voi d) GND GND (void) ( void) NF_RE (void) (void) (void) (void) (void) (voi d) (void) GND SM2_3V3 (void) RQ(void)GND AIN6 _LIGHTSENSOR (void) (void) (void) (void) (voi d) (void) (void) (void) (void) (void) G ND DSP_RESETN (void) AUD2_IN_D0HEADPHONE_DETNNF_CLE NF_ALE NF_WPN (void) (void) (void) ( void) (void) (void) (void) GND VDD_3V6_IN_1(void) QPGND PORZ GND (void) (void) (void) (void) (voi d) (void) (void) (void) (void) (void)DISP_PWR_EN_LED7AUD_OUT_D1 (void) AUD2 _FS AUD_IN_FS NF_WAIT NF_WE NF_CE (void) (voi d) (void) (void) (void) (voi d) (void) GND VDD_3V6_IN_1GND POGND GND AIN4_PWRMON (void) (void) (void) (voi d) (void) (void) (void) (void) (void) (voi d) GND T3_AMPFAULTN (void) GND GND (voi d) (void) (voi d) (void) (void) (void) (void) (void) (void) (void) GND VDD_3V6_IN_1GND ONGND GND GND (void) (void) (void) (void) (voi d) (void) (void) (void) (void) (void) GND T3_AMPSTBYN (void) DISPDCN_LED5ADC_DAC_RESN(void) (void) (void) (void) ( void) (void) (void) (void) (void) (void)GND VDD_3V6_IN_1GND NMGNDDISPCEN_LEDPWM4C18_PMIC_POWER_EN(void) (void) (void) (voi d) (void) (void) (void) (void) (void) (void)DISPRESN_LED6 C18_AM_TSYNC (void) G ND T3_MUTEOUTN(void) (void) (void) (void) ( void) (void) (void) (void) (void) (void) GND VDD_3V6_IN_1GND MLUSB0_DM USB0_VBUS GND (void) (void) (void) (void) (void) (void) (void) (void) (void) ( void) PSM_DISABLE DSP_CSN (voi d) GND GND (void) (void) (void) ( void) (void) (voi d) (void) (void) (void) (void) GND VDD_3V6_IN_1GND LKUSB0_DP USB0_CE AIN0 _5VMON (void) (void) (void) (void) (voi d) (void) (void) (void) (void) (void) GND GND (void) SPI_DIAM3356_JTAG_TDI(void) (void) (void) (void) ( void) (void) (void) (void) (void) (void)GND GND GND KJGND AIN1_IDIN AIN3_PAOFFSET2 (void) (void) (void) (void) (void) (void) (void) (void) (void) ( void) GND AUD_IN_BCLK (voi d)AM3356_JTAG_TDOGND (void) (void) (void) ( void) (void) (voi d) (void) (void) (void) (void) GND GND GND JH(void)USB_FAULTN USB0_ID (void) ( void) (void) (void) (void) (void) (void) (void) (void) (void)AUD_OUT_D2/SPDIF_OUTGND (void) GNDAM3356_JTAG_TMS(void) (void) (void) (void) ( void) (void) (void) (void) (void) (void)GNDANT2_2G4_WIFI_BT(void) HG(void)ADCBIAS GND (void) (void) (void) (void) (void) (void) (void) (void) (void) ( void) GND AUD_OUT_MCLK (void)AM3356_JTAG_TCKGND (void) (void) (void) ( void) (void) (voi d) (void) (void) (void) (void) GND GND GND GFGND GND GND (void) (void) (void) (void) (voi d) (void) (void) (void) (void) (void) AUD_OUT_BCLK GND (void)AM3356_JTAG_RTCKGND (void) (void) (void) ( void) (void) (voi d) (void) (void) (void) (void) GND ANT4_5G_WIFI (void) FE(void)GND GND (void) (void) (void) (void) (void) (void) (void) (void) (void) ( void) GND AUD_IN_D0 (void)AM3356_JTAG_NTRSTGND (void) (void) (void) ( void) (void) (voi d) (void) (void) (void) (void) GND GND GND ED(void)GND GND (void) (void) (void) (void) (void) (void) (void) (void) (void) ( void) AUD_OUT_FS GND (void) GND GND (void) (void) (void) (void) (void) (void) (void) (void) (void) (void) GND ANT3_5G_WIFI (void) DCGND GND AIN2_PAOFFSET1AIN5_THERMISTORGND GND GND GND GND GND GND GND GND GND AUD2_BCLK GND GND GND G ND SM2_1V8_3 GND GND WL_DBGUART_DBUG_BTAUD_IN_BTWL18 37_JTAG_TDIWL_RS232_RX GND GND GND GND CB(void)GND GND GND GND GND GND GND GND GND GND GND AUTH_RESETN GND GND GND GND GND GND GNDC18_HCI_RX_BTC18_HCI_CTS_BT C18_HCI_RTS_BTAUD_CLK_OUT_BTAUD_OUT_BTWL18 37_JTAG_TDOWL18 37_JTAG_TMSC18_HCI_TX_BTGNDANT1_2G4_WIFI(void) BAGND (void) L EDPWM0 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND WL_RS232 _TX GNDAUD_FSYNC_OUT_BTGND GNDWL18 37_JTAG_TCKGND GND (void) GND A1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Navigation menu