Bose 416549 2.4 and 5 GHz Wireless Module User Manual MANUAL AND LABELING REQUIREMENTS

Download:
Mirror Download [FCC.gov]
Document ID	2627196
Application ID	9QEySo+wW+pGFQTyf0d46Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.26kB (278214 bits)
Date Submitted	2015-05-28 00:00:00
Date Available	2015-11-21 00:00:00
Creation Date	2015-02-27 12:04:02
Producing Software	Microsoft® Word 2013
Document Lastmod	2015-02-27 12:04:02
Document Title	MANUAL AND LABELING REQUIREMENTS
Document Creator	Microsoft® Word 2013
Document Author:	Evan Gould

2.4GHz & 5 GHz RF Modular Transceiver System (Model 416549)
Installation manual
1. Description
This document describes an RF transceiver module supporting IEEE 802.11abgn
WiFi protocols, Bluetooth and Bluetooth Low Energy specification. The module
provides its own power regulation and shielding.
2. The module consists of:
1) 2.4 GHz Wi-Fi 802.11 b/g/n MIMO
2.) 2.4 GHz Bluetooth & Bluetooth Low Energy
3.) 5 GHz WiFi 802.11 a/n SISO with antenna diversity.
3. Cautions
This transceiver module is ONLY to be installed in Bose Corporation devices.
The module is to be surfaced mounted to a host printed circuit board with PCB etch
type antennas only. There are no antenna connectors used.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation
Changes or modifications not expressly approved by Bose Corporation could void the
user’s authority to operate the equipment.”
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
4. Markings
4.1 This module shall be identified with the following ID numbers on the radio
shields.
FCC ID : A94416549
IC
: 3232A-416549
4.2 End Product Labeling
The final end product which this module is used in must be labeled in a visible
area with the following:
"Contains FCC ID: A94416549 / IC:3232A-416549"
5. The following table describes the module line grid array footprint.
Pads
10
11
12
13
14
15
16
17
18
19
20
21
23
24
26
27
28
29
GND
(void)
GND
GND
SPI_DO
GND
GND
GND
GND
GND
STROBE3
LED0
GND
RMII1_RXERR
RMII1_CRS_DV
GND
RMII1_REFCLK_50
RMII1_TXD0
GND
GND
GND
GND
GND
GND
GND
GND
I2C1_SDA
GND
GND
(void)
GND
(void)
GND
UART5_RXD
GND
GND
BL_TXD
GND
GND
IR_IN_BL_R
XD
GND
GND
STROBE0
GND
LED1
GND
RMII1_TXD1
GND
GND
EMU0
GND
GND
SM2_1V5
SM2_1V1
GND
VDD_3V6_IN_2
VDD_3V6_IN_2
GND
SM2_1V8
GND
VDD_3V6_IN_
(void)
GND
LED3_MICROB_S
EL
UART5_TXD
GND
SPI_CLK
GND
RMII1_TXEN
GND
GND
GND
GND
GND
EMU1
RMII1_RXD0
MDIO_DATA
GND
MDIO_CLK
RMII1_RXD1
GND
SM2_1V8_2
GND
GND
GND
GND
GND
GND
I2C1_SCL
GND
GND
VDD_3V6_IN_
GND
(void)
NNMI
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
ETAP_TXD
(void)
LED2_MICROB_DE
SWITCH0N
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
(void)
(void)
ETAP_RXD
NRESETIN_OUT
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
USB0_DRVVBUS
GND
(void)
SWITCH2N
STROBE1
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
SYNC_OUT
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
SWITCH1N
C18_WIFI_EN
(void)
C18_BT_EN
STROBE2
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
PMIC_EN
GND
(void)
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
SWITCH3N
GND
(void)
GND
GND
(void)
(void)
NF_RE
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
SM2_3V3
(void)
(void)
GND
AIN6_LIGHTSENSOR
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
DSP_RESETN
(void)
AUD2_IN_D0
HEADPHONE_
DETN
NF_CLE
NF_ALE
NF_WPN
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
(void)
AUD_IN_FS
VDD_3V6_IN_
VDD_3V6_IN_
GND
GND
PORZ
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
DISP_PWR_EN_LED
AUD_OUT_D1
(void)
GND
GND
AIN4_PWRMON
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
T3_AMPFAULTN
(void)
GND
GND
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
T3_AMPSTBYN
(void)
DISPDCN_LED5
GND
DISPCEN_LEDP
WM4
C18_PMIC_POWER
_EN
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
DISPRESN_LED6
C18_AM_TSYNC
(void)
GND
USB0_DM
USB0_VBUS
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
PSM_DISABLE
DSP_CSN
(void)
USB0_DP
USB0_CE
AIN0_5VMON
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
GND
AIN1_IDIN
AIN3_PAOFFSET2
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
AUD_IN_BCLK
(void)
USB_FAULTN
USB0_ID
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
AUD_OUT_D2/SPDI
F_OUT
GND
(void)
(void)
ADCBIAS
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
AUD_OUT_MCLK
(void)
NF_GPMC_A
NF_GPMC_A
NF_GPMC_AD2
D7
D4
NF_GPMC_A
NF_GPMC_A
NF_GPMC_AD1
D5
D3
NF_GPMC_A
NF_GPMC_AD0
D6
22
25
30
VDD_3V6_IN_
VDD_3V6_IN_
31
(void)
NF_WAIT
NF_WE
NF_CE
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
ADC_DAC_RES
T3_MUTEOUT
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
VDD_3V6_IN_
GND
(void)
SPI_DI
AM3356_JTAG
_TDI
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
GND
(void)
AM3356_JTAG_TD
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
GND
GND
AM3356_JTAG
_TMS
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
ANT2_2G4_WI
FI_BT
(void)
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
GND
GND
ANT4_5G_WIFI
(void)
AUD2_FS
VDD_3V6_IN_
VDD_3V6_IN_
VDD_3V6_IN_
GND
GND
GND
GND
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
AUD_OUT_BCLK
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
(void)
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
AUD_IN_D0
(void)
AM3356_JTAG_TC
AM3356_JTAG_RT
CK
AM3356_JTAG_NT
RST
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
GND
GND
(void)
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
AUD_OUT_FS
GND
(void)
GND
GND
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
(void)
GND
ANT3_5G_WIFI
(void)
GND
GND
AIN2_PAOFFSET1
AIN5_THERM
ISTOR
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AUD2_BCLK
GND
GND
GND
GND
SM2_1V8_3
GND
GND
WL_DBG
UART_DBUG_B
AUD_IN_BT
WL1837_JTAG_
TDI
WL_RS232_RX
GND
GND
GND
GND
(void)
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AUTH_RESETN
GND
GND
GND
GND
GND
GND
GND
GND
ANT1_2G4_WI
FI
(void)
GND
(void)
LEDPWM0
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
WL_RS232_TX
GND
AUD_FSYNC_O
UT_BT
GND
GND
WL1837_JTAG_T
CK
GND
GND
(void)
GND
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
6. General Electrical specifications
6.1 Power supply
3.6V +/- 5%
6.2 Power consumption
<5 Watts
6.3 Operational Temperature
0 ~ 40 C
C18_HCI_RX_
AUD_CLK_OUT
C18_HCI_CTS_BT C18_HCI_RTS_BT
BT
_BT
AUD_OUT_BT
WL1837_JTAG_ WL1837_JTAG_T C18_HCI_TX_
TDO
MS
BT

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Title                           : MANUAL AND LABELING REQUIREMENTS
Author                          : Evan Gould
Creator                         : Microsoft® Word 2013
Create Date                     : 2015:02:27 12:04:02-05:00
Modify Date                     : 2015:02:27 12:04:02-05:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools