User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3031086 |
| Application ID | klciYxcMQtK34J5use+/Ag== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 232.15kB (2901860 bits) |
| Date Submitted | 2016-06-16 00:00:00 |
| Date Available | 2016-11-30 00:00:00 |
| Creation Date | 2016-05-26 15:59:25 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-05-26 16:00:27 |
| Document Title | User manual |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
SOUNDSPORT® PULSE FPO O W N E R ’ S G U I D E • D A N I S H • G E R M A N • D U T C H • S PA N I S H • F I N N I S H • F R E N C H • I TA L I A N • H U N G A R Y • N O R W E G I A N • P O L I S H • P O R T U G U E S E • SW E D I S H • T H A I • KO R E A N • S C H I N E S E • T C H I N E S E • J A PA N E S E • A R A B I C I M P O R TA N T S A F E T Y I N S T R U C T I O N S Please read and keep all safety and use instructions. WARNINGS/CAUTIONS • Do NOT use the headphones at a high volume for any extended period. ––To avoid hearing damage, use your headphones at a comfortable, moderate volume level. ––Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level. • Use caution and follow applicable laws regarding mobile phone and headphone use if using the headphones for phone calls while driving. Some jurisdictions impose specific limitations, such as single earpiece configuration, on the use of such products while driving. DON’T use the headphones for any other purpose while driving. • Focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals. • Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact Bose customer service. • Do NOT submerge or expose the headphones for extended period to water, or wear while participating in water sports, e.g., swimming, waterskiing, surfing, etc. • Remove headphones immediately if you experience a warming sensation or loss of audio. • Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating. Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. • Do NOT make unauthorized alterations to this product. • Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC). • Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like). Regulatory Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment. 2 - ENGLISH R E G U L AT O R Y I N F O R M AT I O N This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters. Meets IDA Requirements. CAN ICES-3 (B)/NMB-3(B) Management Regulation for Low-power Radio-frequency Devices Article XII According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. Article XIV The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance Please dispose of used batteries properly, following local regulations. Do not incinerate. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Removal of the rechargeable lithium ion battery in this product should be conducted only by a qualified professional. Please contact your local Bose retailer or see http://products.bose.com/static/compliance/index.html for further information. ENGLISH - 3 R E G U L AT O R Y I N F O R M AT I O N Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI)) Polybrominated Biphenyl (PBB) Polybrominated diphenylether (PBDE) PCBs Metal Parts Plastic Parts Speakers Cables Part Name This table is prepared in accordance with the provisions of SJ/T 11364. O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572. Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “6” is 2006 or 2016. Input Rating: 5V 1A The warranty information provided with this product does not apply in Australia and New Zealand. See www.Bose.com.au/warranty or www.Bose.co.nz/warranty for details. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance. iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used with a license from Aiphone K.K. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google Play and the Google Play logo are trademarks of Google Inc. ©2016 Bose Corporation. No part of this work may be reproduced, modified, distributed or o therwise used without prior written permission. 4 - ENGLISH CONTENTS Getting Started Unpacking.............................................................................................................................. Headphone components................................................................................................. Powering on/off................................................................................................................... Bose® Connect App Features.......................................................................................................................... 10 Charging the Battery Connecting the USB cable.............................................................................................. 11 Checking the battery......................................................................................................... 12 Headphone Status Indicators Bluetooth® indicator ............................................................................................ 13 Battery indicator .................................................................................................. 13 Importance of Proper Fit Choosing the correct StayHear®+ Pulse tip............................................................... 14 Fitting the earbuds to your ear..................................................................................... 14 Changing the StayHear®+ Pulse tips............................................................................ 15 Voice Prompts Pre-installed languages.................................................................................................... 16 Changing the language.................................................................................................... 16 Bluetooth® Technology Pairing your mobile device using the Bose Connect app (recommended).................................................................................................................. 17 Choosing another pairing method....................................................................... 18 Pairing your mobile device using the Bluetooth menu........................................ 19 Pairing your mobile device using NFC....................................................................... 20 Disconnecting a mobile device..................................................................................... 21 Reconnecting a mobile device...................................................................................... 21 ENGLISH - 5 CONTENTS Managing Multiple Connected Devices Switching between two connected mobile devices..................................... 22 Identifying connected mobile devices............................................................... 22 Reconnecting a previously paired mobile device.......................................... 22 Clearing the headphone pairing list ................................................................... 22 Using the Bose® Connect app................................................................................ 22 Heart Rate Sensor Viewing your heart rate in the Bose® Connect app............................................... 23 Viewing your heart rate in a fitness app.................................................................... 23 Headphone Controls Media playback and volume functions....................................................................... 24 Call functions........................................................................................................................ 25 Care and Maintenance Storing ................................................................................................................................... 26 Cleaning.................................................................................................................................. 26 Replacement parts and accessories............................................................................ 26 Customer service................................................................................................................ 27 Limited warranty................................................................................................................. 27 Technical information........................................................................................................ 27 Troubleshooting ....................................................................................................... 28 6 - ENGLISH G E T T I N G S TA R T E D Unpacking Carefully unpack the carton and confirm that the following parts are included: Carry case Bose® SoundSport® Pulse wireless headphones StayHear®+ Pulse tips: Large (L) and Small (S) Note: Medium (M) tips are attached to the earbuds. USB cable If any part of the product is damaged, do not use it. Contact your authorized Bose dealer immediately or Bose customer service. Refer to the quick start guide in the carton for contact information. ENGLISH - 7 G E T T I N G S TA R T E D Headphone components Battery and Bluetooth® indicators StayHear®+ Pulse tips USB connector Heart rate sensor Inline remote and microphone: Volume Up Multi-function button Volume Down Clothing clip (removable) 8 - ENGLISH Power/ Bluetooth button G E T T I N G S TA R T E D Powering on/off To power on: Press the Power/Bluetooth® button until the battery indicator red (to indicate the current battery charge level). glows green, yellow, or To power off: Press and hold the Power/Bluetooth® button until power-down tones. blinks three times and you hear the Power/Bluetooth button ENGLISH - 9 BOSE® CONNECT APP Enhance your headphones experience with the Bose® Connect app. Features • Unlock the full potential of your SoundSport® Pulse wireless headphones. • Free app compatible with most Apple and Android™ systems. • Easily pair your mobile device with your headphones (see page 17). • View your real-time heart rate (see page 23). • Easily connect and switch between multiple mobile devices. • Disable voice prompts. • Keep your headphones up-to-date with the latest software. • Customize headphone settings, like voice prompt language and auto off. 10 - ENGLISH C H A R G I N G T H E B AT T E R Y Connecting the USB cable CAUTION: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC). 1. Open the hinged door on the bottom of the right earbud. 2. Plug the small end of the USB cable into the USB connector. 3. Plug the other end into a USB wall charger or computer that is powered on. • While charging, the battery indicator • When the battery is fully charged, blinks amber. glows green. • Allow up to two hours to fully charge the battery. A full charge powers the headphones for up to five hours. • The headphones will not play while charging. Note: Before charging, be sure the headphones are at room temperature, between 41° F (5° C) and 104° F (40° C). ENGLISH - 11 C H A R G I N G T H E B AT T E R Y Checking the battery • Each time you power on the headphones, the voice prompt announces the headphone battery charge level, and the battery indicator glows for 10 seconds. When you press any of the headphone controls, glows for 10 seconds. For more information, see “Battery indicator” on page 13. • While the headphones are in use, blinks red when the battery needs charging. • If you are connected to an Apple device, the device displays the headphone battery charge level near the upper right corner of the screen. 12 - ENGLISH H E A D P H O N E S TAT U S I N D I C AT O R S The Bluetooth® and battery indicators are located on the back of the right earbud. Bluetooth® indicator Indicator activity System state Blinking blue Ready to pair Blinking white Connecting Solid white Connected Battery indicator Indicator activity System state Green Medium to full charge Amber Low charge Blinking red Need to charge ENGLISH - 13 I M P O R TA N C E O F P R O P E R F I T Choosing the correct StayHear®+ Pulse tip For optimal audio performance, it is important to choose the correct size StayHear®+ Pulse tip. Select the size that gives you the best comfort and fit in each ear. To determine the best fit, you may need to try all three sizes. You may need a d ifferent size for each ear. Note: T o test the fit, try speaking aloud. Your voice should sound muffled in both ears; if not, select another tip size. Each StayHear®+ Pulse tip and earbud is marked with either an L or an R. Be sure to attach the left tip to the left earbud and the right tip to the right earbud. Fitting the earbuds to your ear The StayHear®+ Pulse tip allows the earbud to rest comfortably and securely in your ear. The tip wing fits just under your ear ridge. 1. Insert the earbud so the StayHear®+ Pulse tip gently rests in the opening of the ear canal. 2. Tilt the earbud back and tuck the tip wing under the ear ridge until it is secure. Ear ridge 14 - ENGLISH I M P O R TA N C E O F P R O P E R F I T Changing the StayHear®+ Pulse tips 1. H olding the earbud by the stem, gently grasp the attached StayHear®+ Pulse tip and peel it away from the earbud. CAUTION: To prevent tearing, grasp the StayHear®+ Pulse tip by its base. Do not pull on the tip wing. 2. Align the opening of the new StayHear®+ Pulse tip with the earbud nozzle and rotate the tip onto the nozzle. Note: Make sure the heart rate sensor (left earbud) and heart rate sensor replica (right earbud) protrude through the matching cutouts on the tips. Earbud nozzle Heart rate s ensor (replica) 3. Press the base of the tip until it clicks securely into place. ENGLISH - 15 VOICE PROMPTS Voice prompts guide you through the pairing and connecting processes. Pre-installed languages The following languages are pre-installed on your headphones: • English • German • Korean • Swedish • Spanish • Mandarin • Italian • Dutch • French • Japanese • Portuguese To check for additional languages Visit: global.Bose.com/Support/SSP Changing the language When you turn on the headphones for the first time, the voice prompts are in English. To select a different language: 1. P ress and hold and first language option. 2. Press or simultaneously until you hear the voice prompt for the to move through the list of languages. 3. When you hear your language, press and hold to select. Note: You can also change the voice prompt language using the Bose Connect app. 16 - ENGLISH B LU E T O OT H ® T E C H N O LO G Y Bluetooth® wireless technology lets you stream music from mobile devices such as smartphones, tablets and laptop computers. Before you can stream music from a mobile device, you must pair the mobile device with your headphones. Pairing your mobile device using the Bose® Connect app (recommended) 1. Power on your headphones. Power/Bluetooth button 2. Download the Bose Connect app and follow the on-screen connection instructions. Once paired, you hear “Connected to” or glows solid white. ENGLISH - 17 B LU E T O OT H ® T E C H N O LO G Y Choosing an alternate pairing method If you are unable to pair your mobile device using the Bose Connect app, you can try pairing using the Bluetooth settings menu or Near Field Communication (NFC). What is NFC? NFC uses Bluetooth technology to let two devices establish wireless communication with each other by simply tapping the devices together. Refer to your mobile device owner’s guide to see if your model supports NFC. If your mobile device does not support Bluetooth pairing via NFC or if you are unsure: Follow the instructions for “Pairing your mobile device using the B luetooth settings menu” on page 19. If your mobile device supports Bluetooth pairing using NFC: Follow the instructions for “Pairing your mobile device with NFC” on page 20. Note: If your mobile device supports Bluetooth pairing via NFC, you can use either pairing method. 18 - ENGLISH B LU E T O OT H ® T E C H N O LO G Y Pairing your mobile device using the Bluetooth® menu 1. W ith your headphones powered on, press and hold the Power/Bluetooth® button until you hear “Ready to pair” or the Bluetooth indicator blinks blue. Power/Bluetooth button 2. On your mobile device, turn on the Bluetooth feature. Tip: The Bluetooth feature is usually found in the Settings menu. 3. Select your Bose® SoundSport® Pulse wireless headphones from the device list. Once paired, you hear “Connected to ” or glows solid white. ENGLISH - 19 B LU E T O OT H ® T E C H N O LO G Y Pairing your mobile device using NFC 1. With your headphones powered on, unlock your mobile device and turn on the Bluetooth® and NFC features. Refer to your mobile device owner’s guide to learn more about these features. 2. Tap the NFC touchpoint on your mobile device to the back of the inline remote. Your mobile device may prompt you to accept pairing. Once paired, you hear “Connected to ” or the Bluetooth indicator glows solid white. 20 - ENGLISH B LU E T O OT H ® T E C H N O LO G Y Disconnecting a mobile device • Turn off the Bluetooth® feature on your mobile device. • If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to the back of the inline remote. Reconnecting a mobile device • When powered on, the headphones try to reconnect with the two most recently-connected mobile devices. Note: The mobile devices must be within range and powered on. • If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to the back of the inline remote. ENGLISH - 21 M A N A G I N G M U LT I P L E C O N N E C T E D D E V I C E S You can store up to eight paired mobile devices in the headphone pairing list and your headphones can be actively connected to two mobile devices at a time. Note: You can only play audio from one mobile device at a time. Switching between two connected mobile devices 1. Pause audio on your first mobile device. 2. Play audio on your second mobile device. Identifying connected mobile devices Press the Power/Bluetooth® button to hear which mobile devices are currently connected. Reconnecting a previously paired mobile device 1. Press the Power/Bluetooth button to hear which mobile device is connected. 2. P ress the Power/Bluetooth button again within three seconds to connect to the next mobile device in the headphone pairing list. Repeat until you hear the correct mobile device name. 3. Play audio on the connected mobile device. Clearing the headphone pairing list 1. Press and hold the Power/Bluetooth button for 10 seconds, until you hear “Bluetooth device list cleared.” 2. Delete your SoundSport Pulse wireless headphones from the Bluetooth list on your mobile device. All mobile devices are cleared and the headphones are ready to pair a new mobile device. Using the Bose® Connect app You can also easily manage multiple connected devices using the Bose Connect app. For more information, see “Bose® Connect App” on page 10. 22 - ENGLISH H E A R T R AT E S E N S O R Viewing your heart rate in the Bose® Connect app After your headphones are connected to your mobile device, you can view your real-time heart rate in the Bose Connect app. Note: To view your heart rate, make sure the left earbud is securely in place t hroughout your workout. Viewing your heart rate in a fitness app After your headphones are connected to your mobile device, you can view your heart rate in most popular fitness apps. To begin, set up your headphones as the heart rate sensor in your fitness app. Tips for setup • During setup, keep your earbuds in your ears. • During setup, move away from any other devices with heart rate sensors. • In your fitness app’s Settings menu, look for a “Devices,” “Hardware” or “Heart Rate Monitor” menu. Select “Search for sensor” or “Auto-connect.” • Some fitness apps may require you to select HR-Bose SoundSport Pulse as the heart rate sensor in the device list. • Some fitness apps may require you to select “Start workout” to view your heart rate. • Make sure the left earbud is securely in place throughout your workout. • Refer to your fitness app’s help menu for more information on connecting to a heart rate sensor. Note: Some fitness apps require a paid subscription to view detailed heart rate data. ENGLISH - 23 HEADPHONE CONTROLS Media playback and volume functions The headphone controls are located on the inline remote below the right earbud. Volume Up Multi-function button Volume Down Function What to do Play/Pause Press Skip Forward Press twice quickly. Skip Backward Press three times quickly. Fast forward Press twice quickly and hold the second press. Rewind Press three times quickly and hold the third press. Volume Up Press Volume Down Press 24 - ENGLISH HEADPHONES CONTROLS Call functions Function What to do Answer a call Press End a call Press Decline an incoming call Press and hold Answer a second incoming call and put the c urrent call on hold While on a call, press Decline a second incoming call and stay on current call While on a call, press and hold Switch between two calls With two active calls, press Create a conference call With two active calls, press and hold Activate voice control While not on a call, press and hold for one second. once. for one s econd. twice. for one s econd. for one second. efer to your mobile device’s owners guide for compatibility and usage information about this feature. Mute/unmute a call While on a call, press and simultaneously. ENGLISH - 25 C are and M aintenance Storing • Turn off the headphones when not in use. • Before storing the headphones for more than a few months, fully charge the battery. • Place the headphones in the carry case for storage. Cleaning Your headphones may require periodic cleaning. StayHear®+ Pulse tips: Remove the tips from the earbuds and wash them with a mild detergent and water. Make sure you thoroughly rinse and dry the tips before attaching them to the earbuds. Headphone nozzles: Clean only with a dry, soft cotton swab or equivalent. Never insert any cleaning tool into the nozzle. Replacement parts and accessories Replacement parts and accessories can be ordered through Bose customer service. See “Customer service” on page 27. 26 - ENGLISH C are and M aintenance Customer service For additional help using your headphones: • Visit: global.Bose.com/Support/SSP • Contact Bose customer service. Refer to the in-carton literature for contact information. Limited warranty Your SoundSport® Pulse wireless headphones are covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights. The warranty information provided with this product does not apply in Australia and New Zealand. See our website at www.bose.com.au/warranty or www.Bose.co.nz/warranty for details of the Australia and New Zealand warranty. Technical information Input Rating: 5V 1A ENGLISH - 27 T R O U B L E S H O OT I N G Problem What to do Headphones don’t turn on • Power on the headphones (see “Powering on/off” on page 9). Headphones don’t pair with mobile device • On your mobile device: • Charge the battery. –– Turn the Bluetooth feature off and then on. –– Delete your Bose® SoundSport® Pulse headphones from the Bluetooth list on your mobile device. Pair again. • Move your mobile device closer to the headphones and away from any interference or obstructions. • Pair a different mobile device (see “Pairing your mobile device using the B ose® Connect app” on page 17). • Visit: global.Bose.com/Support/SSP to see how-to videos. • Clear the headphone pairing list: Press and hold the Power/Bluetooth button for 10 seconds until you hear “Bluetooth device list cleared.” Delete your Bose SoundSport Pulse headphones from the B luetooth list on your mobile device. Pair again. Headphones don’t pair with NFC-enabled mobile device • Make sure your mobile device supports NFC. No sound • Power on the headphones and charge the battery. • Unlock your mobile device and turn on the Bluetooth and NFC features. • T ap the NFC touchpoint on the back of your mobile device to the back of the inline remote. • Increase the volume on your headphones and mobile device. • Press the Power/Bluetooth button to hear the connected mobile device. Make sure you are using the correct device. • Move your mobile device closer to the headphones and away from any interference or obstructions. • Use a different music source. • Pair a different mobile device (see “Pairing your mobile device using the B ose® Connect app” on page 17). • If two mobile devices are connected, pause the first mobile device and play the other mobile device. • If two mobile devices are connected, move the mobile devices within range of the headphones (30 ft. or 10 m). 28 - ENGLISH T R O U B L E S H O OT I N G Problem What to do Poor sound quality • Use a different music source. • Pair a different mobile device (see “Pairing your mobile device using the B ose® Connect app” on page 17). • Disconnect the second mobile device. • Move the mobile device closer to the headphones, and away from any interference or obstructions. • Clear any debris or wax buildup from the earbuds and headphone nozzles. Headphones don’t charge • Open the hinged door on the bottom of the right earbud and securely connect the small end of the USB cable to the USB connector. Make sure the connector on the cable is correctly aligned with the connector on the headphones. • Secure both ends of the USB cable. • If your headphones have been exposed to high or low temperatures, let the headphones return to room temperature and then try charging again. Heart rate does not appear in Bose Connect app • In the Bose Connect app, make sure your Bose® SoundSport® Pulse headphones are connected to your mobile device. • Make sure the left earbud fits securely in your ear. You may need to try a different size StayHear®+ Pulse tip. • Close and relaunch the Bose Connect app. • Power the headphones off and then on. • On your mobile device, turn the Bluetooth feature off and then on. Heart rate does not appear in fitness app • In the B luetooth list on your mobile device, make sure your Bose® SoundSport® Pulse headphones are selected. • Make sure the left earbud fits securely in your ear. You may need to try a different size StayHear®+ Pulse tip. • In some fitness apps, you may need to select “Start workout” to view your heart rate. • Close and relaunch the fitness app. • Power the headphones off and then on. • On your mobile device, turn the Bluetooth feature off and then on. • Refer to your fitness app’s help menu for more information on connecting to a heart rate sensor. Heart rate drops out • Make sure the left earbud fits securely in your ear. You may need to try a different size StayHear®+ Pulse tip • Clean the heart rate sensor on the left earbud. • Close and relaunch the fitness app. • Power the headphones off and on. ENGLISH - 29 T R O U B L E S H O OT I N G Problem What to do StayHear®+ Pulse tips falling off Securely attach the tips to the earbuds (see “Changing the StayHear®+ Pulse tips” on page 15.) Lost StayHear®+ Pulse tips Contact Bose customer service for replacement tips (see “Customer service” on page 27). 30 - ENGLISH ENGLISH - 31 ©2016 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM771977 Rev. 00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Create Date : 2016:05:26 15:59:25-04:00 Metadata Date : 2016:05:26 16:00:27-04:00 Modify Date : 2016:05:26 16:00:27-04:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:21e090bd-037b-43aa-8f3c-0447ad730c35 Original Document ID : xmp.did:24289986-4e07-4942-93b1-62c962ede61b Document ID : xmp.id:584da4fc-1925-bc49-9f50-d353637927d1 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:c007f683-107c-d54c-b772-2e3a6c16ba2e Derived From Document ID : xmp.did:b5666133-95d7-c34e-8cc5-8da1934826bc Derived From Original Document ID: xmp.did:24289986-4e07-4942-93b1-62c962ede61b Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:05:26 15:59:25-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 32 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools