Boston Amplifier 81906-BDA-SBX Booster/Bi-Directional Amplifier User Manual BDA 800 User Guide P1

Download:
Mirror Download [FCC.gov]
Document ID	643646
Application ID	OMR2OtPIwFP2CUvK0toPBg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.66kB (183225 bits)
Date Submitted	2006-04-04 00:00:00
Date Available	2006-04-03 00:00:00
Creation Date	2005-07-25 14:04:32
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-03-29 10:49:27
Document Title	BDA-800 -User Guide-P1.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	Saleem Qureshi

Vechile
Home / Office
Bi-Directional Amplifier
Installation Guide
Model:
BDA-800NXT
BDA-819
BDA-1900
Wireless Operation
No Physical Connection to Cell Phone
Boost Cellular
Signal 1000%
Signal Sensing Technology
®
http://www.bostonamplifier.com
BDA-800NXT, 819, 1900
Installation Guide
Notice:
The information in this document is intended for informational purposes
only, and is subject to change without notice. By using this product, the
user assumes all risk. Any and all references to Boston Amplifier in this
document, including those in the Warranty, refer to the manufacturer:
Boston Amplifier, Inc.
In no event will Boston Amplifier or its affiliates be liable for direct, indirect,
special, incidental, or consequential damages arising out of the use or the
inability to use the product or documentation, even if advised of the
possibility of such damages.
No part of this reference manual may be reproduced or transmitted in
any form, or by any means, without the prior written consent of Boston
Amplifier.
Legal:
The information provided herein is believed to be completed and accurate,
however, no responsibility is assumed by Boston Amplifier for any
business or personal losses arising from the use of this product, nor for any
infringements of patents. Boston Amplifier reserves the right to change,
alter, modify or edit the specifications at anytime without notice. Other
rights of the third party, which may result from its use.
Trademarks:
Throughout this User's Guide, trade names and trademarks of other
companies or products may appear. This is not intended to imply or
convey the endorsement of, or any affiliation of Boston Amplifier with, any
of these companies or products. Boston Amplifier and Antenna Port
Module are Trademarks of Boston Amplifier,Inc.
Copyright © 2002 -2005 Boston Amplifier, Inc.
All rights reserved.
Rev 1.1
BDA-800NXT, 819, 1900
Installation Guide
Note: This product amplifies radio frequency energy.
Improper installation or use not in strict accordance with
the manufacturer's instructions may result in improper
operation and or potential damage to the product. There is
no guarantee against the presence of interference by
other transmitters and noise sources on the operating
frequencies. The user is responsible for complying with
all applicable federal, state, and local laws, including
those pertaining to those involving allowable levels
of non-ionizing radiation.
Bi-Directional Amplifier
Connection Diagram
Power Cord
+12V/35VDC
Figure 1
BDA
Bi-Directional
Amplifier
To Exterior
Mag Mount
Antenna
SST LED
PWR LED
- C +
Connection
Polarity
To In Vehicle (APM)
Antenna Port Module
Figure 2
AC Adapter
110V AC - 60 Hz
220V AC - 50 Hz
BOSTON
Output +12V DC
Max 1.2Amp
Amplifier
Your solution to wireless technology
Switching Adaptor
Model No: BDA-13
230000121-101
Input: 110VAC 50/60 Hz
Ouput: 12VDC @ 1.3A
- C +
Installation Guide
BDA-800NXT, 819, 1900
This device complies with FCC rules. Boston Amplifier
provides bi-directional amplification of transmit (uplink from
the phone to the service provider) and receive (downlink to
the phone from the service provider). This amplification
can provide improved portable cellular phone call quality,
reliability, and range in marginal signal areas.
Features of the Bi-Directional Amplifier Include
Depends on your models, if it is for Vehicle or Home/Office use
- Models covering Cellular BDA-800NXT, 819 & 1900
- Antenna Isolation SST® and Power LED Indicator
- 4 or 15 Feet Cable with Antenna Port Module
- DC Vehicle Power cable or AC Adapter
- Home / Office Exterior Antenna with Bracket and Cable
- One Year Warranty
Note:
4 Feet Cable for Vehicle Use
15 Feet Cable for Home Office Use
The BDA (Bi-Directional Amplifier) is designed for use with
cell phones capable of no more than 600 milliwatts output.
The majority of wireless phones sold meet this requirement.
Any attempt to connect higher-powered phones, such as
older analog mobile telephones, to the Bi-Directional
Amplifier will nullify the manufacturer's warranty, result in
improper and illegal operation, and can damage the unit
and or cell phone.
BDA-800NXT, 819, 1900
Installation Guide
Note: Please read the entire contents of this installation guide.
Important: The BDA-800NXT, 819 or 1900 can be used with
Hands-free kit already installed in vehicle or can be used
only with Boston Amplifier’s Antenna Port Module
(Wireless) with standard off the shelf Cell Phone holder
(Cradle).This product is exclusively for use in vehicles,
vessels or Home / Office use with a negative-ground
power supply.
Operating Voltage: 12VDC to 35VDC
Power Consumption: Typical Stand By: 350ma
Usage 550ma
Step 1: Placement of Amplifier Unit inside the vehicle,
within 4 to 6 ft reach of cigarette lighter, make sure it
rests flat, or mounted behind dash board or under the
seat with double adhesive tape to secure in place and is
not a hazard to driver, or secure the unit on the floor or
next to desk in Home / Office.
Step 2: DC Power Cable connect in Cigarette Lighter of
vehicle or hard wired in vehicle. Use AC Adapter for
Home / Office use. Connect DC Power Jack to the power
connector socket in the amplifier unit.
Note: To avoid the vehicle battery drainage make sure
that the amplifier is not receiving any power during the
“OFF” stage of Ignition Key.
BDA-800NXT, 819, 1900
Installation Guide
Step 3: Position of Exterior Antenna on vehicle at rear
glass or on the trunk or on the rear top of vehicle as far
as back as possible. For Home / Office mount the
Exterior Antenna near the window or out side the balcony
at most upper area of the window. Connect the cable to
Antenna side of the Amplifier.
Step 4: Take 4ft or 15ft Cable and connect with the
hands free kit or directly hard wired to your cell phone or
use APM (Antenna Port Module) Position APM in the
cradle or holder anywhere in front with the best
unobstructed view or on your Home / Office Desk. Place
your cell phone on top of APM in the cradle as a pickup
wireless signal and use head set from your cell phone to
have communication or within a reach of 4 to 6 feet.
Step 5: Red Power LED is lit as soon as Ignition Switch
or AC Power Adapter Switch become activated, also
observe Green LED lit. If APM and Exterior Antenna are not
at an adequate distance then the Green LED will go off,
including the Red Power LED and Red LED will start blinking.
For further Information see SST® Antenna Installation
Guide.
Important: For optimal performance, rear exterior
antenna to be mounted vertically and Power LED and
Green LED should be ON not Blinking.
BDA-800NXT, 819, 1900
Installation Guide
®
SST Antenna Installation Guide.
Signal Sensing Technology® (SST ®) is included in all of
Boston Amplifier’s Bi-Directional Amplifiers. This Signal
Sensing Technology ® (SST®) will determine if the External
and Internal Antennas have sufficient separation.
SST® Protection:
It will avoid over heating.
It will not burn the unit.
It will avoid week transmit and receive signals due to the
antennas not having sufficient separation.
It will provide visual alarm if the antenna separation is not
sufficient.
It will self correct once the antenna separation is determine to
be sufficient.
SST® Visual Alarm:
1. On power-up, the RED LED (Power “ON”) light shows
that the unit is on. Simultaneously the GREEN SST®
Light comes on if both antennas have the proper
separation.
Figure 3
Do Not Apply Power
Until Antenna Is Connected
To The Antenna Port
+12V/24V PWR
on
Ph
DC Input
ll
Ce
Antenna Isolation Is OK
Green LED
Power ON - Red LED
BDA-800NXT, 819, 1900
2.
Installation Guide
On power-up, the RED LED (Power “ON”) will not
come on and the GREEN SST® light will be RED
and blinking. This means that the exterior and
indoor antennas are too close to each other and
need to be moved further apart.
Figure 4
Do Not Apply Power
Until Antenna Is Connected
To The Antenna Port
+12V/24V PWR
on
Ph
DC Input
ll
Antenna Isolation Is Not OK
Power OFF
3.
Separate the external antenna away from the
internal antenna until you observe the Green SST®
Light as shown in figure 3.
4.
Do not turn the power off if the SST® Red Light
Blinks. It has automatic signal sensing technology,
which will protect the unit from over heating and
making the unit more efficient in performance.
BDA-800NXT, 819, 1900
Home Installation
Vehicle Installation
Installation Guide
BDA-800NXT, 819, 1900
Installation Guide
Example: Inside Office Installation
or
Bi-Direction Amplifier
Of
fic
Do
Antenna Port Module
On Holder or Cradle
Chair
Office Wall
For Better Reception
4 to 5 Feet Distance
Is Required
Desk
ep
Ke
et
Fe
20 t
um Fee
nim 5
Mi e 2
ce ov
an ab
ist um
s D im
thi Max
Note:
Exterior Antenna
Mounted Outside
the Wall of Home
or Office Vertically
to
Coax Cable
Figure 7
BDA-800NXT, 819, 1900
Installation Guide
Limited Warranty
Boston Amplifier warrants to the original purchaser a product free from
defects in material and workmanship for a period of One (1) year from the
date of purchase.
Under the above warranty, Boston Amplifier, at its option, shall either repair
or replace non-conforming or defective products. If Boston Amplifier
determines that the product has been misused, carelessly handled,
defaced (including unauthorized repairs performed or attempted by
others), modified or altered in any way, the warranty will be considered null
and void, and the unit will not be repaired or replaced under warranty.
The product must be returned with the proof of purchase to the point of
purchase or by obtaining an RMA (Return Merchandise Authorization)
number from Boston Amplifier. Claims must be made in accordance with
the provisions of this warranty and within the applicable warranty period or
they will be disregarded.
No inbound or outbound shipping will be paid, regardless of the territory, by
Boston Amplifier
neither will its agents, employees, or sales
representatives pick up or deliver any defective or non-defective products
from customer, distributor or OEM sites. Any product, which is inbound
from overseas, must be handled by properly licensed freight forwarders in
order to comply with the applicable laws of the United States of America.
Boston Amplifier will not be responsible for any product which has been
lost or damaged during inbound and outbound shipping. It is customers
responsibility to obtain full insurance from the shipping carriers.
Boston Amplifier reserves the ultimate authority to determine what
constitutes warranty repair. If it is determined that the product is received
after expiration of the warranty period, it will be repaired using Boston
Amplifier's standard rates for parts and labor, which may change from time
to time.
Cont’d Next Page
Limited Warranty
Boston Amplifier will use its best efforts to repair the product within 15
working days after receipt thereof. Boston Amplifier shall not be
responsible for delays caused by shipping or non-availability of
replacement parts or other causes, events, or conditions beyond its
reasonable control.
The above warranty is the only warranty authorized by Boston Amplifier.
The above warranty states the purchaser's exclusive remedy for any
breach of the Boston Amplifier warranty and for any claim, whether
sounding in contract, tort or negligence, for loss or injury caused by the
sale of any product without limiting the generality of the foregoing, shall
be limited no more than the replacement value of the Boston Amplifier
purchased, or an equivalent product, and only in the event the remedy
is being sought by the original purchaser of the Boston Amplifier product
in question. Boston Amplifier shall in no event be responsible for any
loss of business or profits, downtime or delay, labor, repair, monetary,
financial, or material costs, injury to person, persons or property, or any
similar or dissimilar consequential loss or damage incurred by the
purchaser, even if Boston Amplifier has been advised of the possibilities
of such losses or damages.
Note: Warning Statements: User must keep 111CM or 48
Inches distance from the RF radio device
Boston Amplifier, Inc
2110 Artesia Blvd Suite B202
Redondo Beach, CA 90278
http://www.bostonamplifier.com
Copyright © 2002 -2005 Boston Amplifiers, Inc.
All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:fc022ff8-9a56-4f3b-8681-72ccad7dcd29
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:07:25 14:04:32-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:03:29 10:49:27-08:00
Metadata Date                   : 2006:03:29 10:49:27-08:00
Document ID                     : uuid:b3546cbd-f966-4d58-8bd8-0100d98d682c
Format                          : application/pdf
Title                           : BDA-800 -User Guide-P1.pdf
Creator                         : Saleem Qureshi
Author                          : Saleem Qureshi

EXIF Metadata provided by EXIF.tools