Bowflex Ultimate 2 Owner S Manual

Assembly Manual BFX_Ultimate2_AM_RevC_web Bowflex Product Manuals | Bowflex

Bowflex Ultimate 2 Home Gym Assembly Manual assembly_ultimate2 Troubleshoot Bowflex Ultimate 2 Home Gym Assembly |

Assembly Manual BFX_Ultimate2_AM_RevC_web Bowflex Product Manuals | Bowflex

2014-07-05

: Bowflex Bowflex-Bowflex-Ultimate-2-Owner-S-Manual bowflex-bowflex-ultimate-2-owner-s-manual bowflex pdf

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

The Bowflex Ultimate 2
Assembly Instructions
®

(Shown with optional accessories)

WWWBOWFLEXCOM

000-4300-092308C

Congratulations
Congratulations on your commitment to improving your health and fitness! With the Bowflex Ultimate® 2 home
gym, you have everything you need to exceed all of your physical fitness, strength and health expectations!
The Bowflex Ultimate® 2 home gym’s exceptional resistance and quality is unmatched by any other single piece
of home fitness equipment available. You will not believe the amazing results your body will get with the Bowflex
Ultimate® 2 home gym!
With all of the fitness choices available today, finding the best workout equipment for your needs can be confusing.
Everyone at Nautilus would like to congratulate you and thank you for selecting the Bowflex Ultimate® 2 home
gym.
The Bowflex Ultimate® 2 home gym is the best home fitness product available, and you’re just about to prove it to
yourself.

Assembly Guide Table of Contents
Bowflex Ultimate® 2 Seat Rail Securing Device..2

Installing Your Bowflex Ultimate® 2 Accessories

Before You Start......................................................5

Squat Attachment............................................41

Bowflex Ultimate® 2 Parts Reference Guide.......6

Leg Extension...................................................43

Parts List...................................................................7

Leg Extension Seat..........................................44

Tools You Will Need..............................................15

Preacher Curl...................................................44

Hardware Chart.....................................................16

Bench................................................................45

Assembling Your Bowflex Ultimate® 2 Gym......17

Ab Crunch Attachment...................................45

Installing Your Bowflex Ultimate® 2 Cables.......35

DVD Player.......................................................46

Bowflex Ultimate 2 Seat Rail Securing Device Addendum
®

NOTICE: T
his Addendum provides important instructions for securing the Bowflex Ultimate® 2 Home
Gym Seat Rail to the Seat Rail Securing Device. Be aware that the Owner’s and Assembly
Manuals refer to the Seat Rail Securing Device as the "Squat Holder" and/or "rail securing
device".

If you need assistance, please call Bowflex® Customer Service at 1-800-628-8458.
WARNING Failure to secure the Seat Rail Securing Device into
the Seat Rail may cause injury.
It is important to latch the Seat Rail Securing Device into the Seat Rail
before performing the following exercises:
•
•
•
•
•
•

Standing Lat Row
Standing Biceps Curl (with pulleys)
Squat
Lunge
Standing Calf Press
Wide Squat

Figure 1

Part A
Latch the Seat Rail Securing Device
Step 1: Remove the Seat Back
Step 2: Lock the Sliding Seat
2-1 Seat must be locked at the end of the Seat Rail.

Figure 2

2-2 Make sure that the sliding seat lock handle is in the locked position
(Figure 1).
Step 3: Lift the Seat Rail
3-1 Bend at the knees and grab the Seat Rail with one hand and the
locked Sliding Seat with your other hand (Figure 2).
3-2 Use your legs to lift the Seat Rail (Figure 3).
(Part A continued on page 2)
Figure 3

Bowflex Ultimate® 2 Seat Rail Securing Device Addendum

Part A (continued)
Step 4: Latch the Seat Rail Securing Device
4-1 Insert the Seat Rail Securing Device into the hole in the Seat Rail
until it clicks (Figures 4, 5, 6).
Step 5: Make sure that the Seat Rail is secured.
5-1 Stand to the side of the machine base and Seat Rail.
WARNING Do not stand on the base below the Seat Rail when you
pull on it. This may cause injury.
5-2 Pull down on the Seat Rail to make sure that the Seat Rail Securing
Device is secured (Figure 7).

Figure 4
Seat Rail
Securing
Device
Seat Rail

Figure 5

Figure 6

Figure 7

Bowflex Ultimate 2 Seat Rail Securing Device Addendum
®

Part B
Release the Seat Rail Securing Device
Step 1: Secure the Seat Rail Securing Device
1-1 W ith your inside foot on the machine base, hold the Seat Rail with
one hand and push your shoulder into it lightly (Figure 8).
1-2 Continue to hold the Seat Rail with one hand and your shoulder. Use
your free hand to unlock the Seat Rail Securing Device (Figures 8
and 9) until it releases (Figure 10).
Step 2: Lower the Seat Rail
2-1 W hen the Seat Rail Securing Device releases, use both hands to
hold onto the Seat Rail (Figure 11).

Figure 8

2-2 Use both hands to carefully lower the seat down into the horizontal
position (Figure 12).
WARNING Do not stand on the base below the Seat Rail when you
lower it. This may cause injury.
WARNING Always use both hands to lift and lower the Seat Rail.
Bend at the knees when lifting or setting down the Seat Rail.
Failure to use proper lifting techniques may cause injury.

Figure 9

Figure 10

Figure 11

Figure 12

Before You Start

Before You Assemble
Select where you are going to locate your Bowflex
Ultimate® 2 home gym carefully. The best place for
your home gym is on a hard, level surface. For best
results, assemble your home gym in the location where
you intend to use it. Allow a workout area of at least
8’4”L x 6’6”W (2.6m L x 2m W) of free space for safe
operation of the Bowflex Ultimate® 2 home gym.
A minimum of 7’4” of ceiling height will be required to
assemble your Bowflex Ultimate® 2 home gym.

Basic Assembly Principles

Here are a few basic tips that will make your assembly
of the Bowflex Ultimate® 2 home gym quick and easy.
By using these principles, you can simplify each process
and save yourself extra time and effort.
1. To make the assembly process go faster,
gather the pieces you need for each step and
thoroughly read the assembly instructions for
that step prior to starting assembly for the step.
2. When tightening a locknut on a bolt, use a
combination wrench to grip the locknut and
ensure that it is fastened securely.
3. When attaching two pieces, gently lift and look
through the bolt holes to help guide the bolt
through the holes.
4. As a general rule, and for all bolts and nuts on
your Bowflex Ultimate® 2 home gym, turn bolts
or nuts toward the right to tighten and left to
loosen.
NOTE: Leave all Cables wrapped and bagged until your
Bowflex ULTIMATE® 2 is fully assembled.

Bowflex Ultimate 2 Parts Reference Guide
®

Lat Bar Rests

Vertical Main Frame

Lat Bar
Rod Hook

Cable

Bench

Adjustable
Pulley System
Preacher Curl
Attachment

Pulley Frame

Rod Box
Seat
Pulley
Hand Grip/
Ankle Cuff
Leg Extension/
Leg Curl Attachment

Spring Lock
Seat Pin

Squat
Attachment

Seat Rail

Preacher Curl
Attachment

Standing/Squat Platform

Ab Curl
Attachment
(optional)

Box Contents / Parts List

BOX 1

Box 1 Contents
Reference #
Qty.
1

Description
210 lb. Rod Pack

Box Contents / Parts List

BOX 2
3

Box 2 Contents
Reference #
2

Qty.
1

Description
Rear Base Assembly
Right Squat Assembly Handlebar
Left Squat Assembly Handlebar
Squat Frame
Squat Assembly Pad
Front Plastic Cover
Right Rear Plastic Cover
Left Rear Plastic Cover

Box Contents / Parts List

BOX 3

Box 3 Contents
Reference #
10

Qty.
1

Description
Front Base Assembly
Front Base Plate
Front Handle Assembly
Single Pulley Assembly With Two Cheeks
Leg Extension Pulley Bracket

Box Contents / Parts List

BOX 4
23

21
20

19
17
18

25
15
Box 4 Contents
Reference #
15

Qty.
2

Description
Side Plate
Floating Pulley assembly
Single Pulley Assembly With Two Cheeks
Pulley
Pulley Slider
Cross Brace
Washer Plate
Squat Holder
Right Lower Upright
Left Lower Upright
Rod Box (Rod Box Retainer is located on hardware card)
Chest Bar

Box Contents / Parts List

BOX 5

27
32

28
33
29
34
35

Box 5 Contents
Reference #
27

Qty.
1

Description
Lat Pull Down Bar
Bench
Plastic Foot
Grip Ankle Cuff
Hand Grip
Foot Harness
Foot Harness Instructions
Seat Rail With Sliding Seat
Hardware Cards
Rowing Belt

Box Contents / Parts List

BOX 6
37

38
40

43
42

Box 6 Contents
Reference #
37

Qty.
1

Description
Top Plate
Right Lat Boom
Left Lat Boom
Lat Bar With Pulley Sliders
Rear Pulley Frame
Face Plate
Left Upper Lat Upright
Right Upper Lat Upright

Box Contents / Parts List

BOX 7
46

51
52

Box 7 Contents
Reference #
45

Qty.
1

Description
Leg Extension Seat Frame
Leg Extension Seat Pad
Preacher Curl Pad
Hardware Bag
Preacher Curl Bar
Preacher Curl Frame
Roller Pad
Leg Extension Assembly
Webbing With Steel Rings
Leg Extension Roller Shaft

Box Contents / Parts List

Ab Box
55
63
56
57
58

59
60

Ab Box Contents
Reference #
Qty.
55

Description
Ab Crunch Middle pad
Ab Crunch Handle Bar
Hardware Bag
Ab Crunch Roller Shaft
Ab Crunch Pivot Arm
Ab Crunch Frame
Ab Cable Hook
Ab Crunch Back Pad
Ab Cruch Roller Pads

Tools You Will Need

Hex Wrenches Are Provided in the Box
3/16” Hex Key for 5/16” Pan Head Allen Bolts :

7/32” Hex Key for 3/8” Pan Head Allen Bolts :

5/32” Hex Key for #10 Cap Screws :

These Tools Are Not Provided in the Box
Wrench (1/2”), (7/16”), (9/16”) and (3/4”) or Adjustable Wrench
(not provided):

Phillips Head Screwdriver (not provided):

* Specifications subject to change without notice.

NOTE: the rod box retainer (with 2 pre-installed
screws) is located on the hardware card.

Hardware Chart (1:1 scale)

1TY 0AN(EAD!LLEN"OLTvXv
1TY
#AP3CREWS

1TY 0AN(EAD!LLEN"OLTvXv
1TY
#AP3CREW
Xv

1TY 0AN(EAD!LLEN"OLTvXv

,OCATEDIN!B"OXHARDWAREBAG

1TY
3ELF4APPING
3CREWS
Xv

1TY7ASHERS
1TY 0AN(EAD!LLEN"OLTvXv

1TY
.YLOCK.UTv
1TY7ASHERSv

1TY 0AN(EAD!LLEN"OLTvXv

1TY
.YLOCK.UTv

4WOOFTHESEARELOCATED
IN!BBOXHARDWAREBAG

1TY 0AN(EAD!LLEN"OLTvXv

1TY7ASHERSv

1TY 0AN(EAD!LLEN"OLTvXv

1TY
3ELF4APPING
3CREWS
vXv

%IGHTOFTHESEARELOCATEDIN
"OXHARDWAREBAG

1TY
.YLOCK.UTv

1TY 0AN(EAD!LLEN"OLTvXv
1TY7ASHERSv
1TY
"UTTON(EAD3CREWS
vXv

1TY
#OACH3CREWS

1TY
0AN(EAD!LLEN"OLT
vXv

,OCATEDIN"OXHARDWAREBAG

1TY7ASHERSv

1TY
3ELF4APPING
3CREWS
Xv

1TY
.UT

1TY
0INS

1TY
0AN(EAD
!LLEN"OLT
vXv

Assembling Your Bowflex Ultimate® 2

STEP 1

Front Base Platform

Parts:
• Front Base Platform (Box 3)
• Metal Handle Assembly (Box 3)
Tools:
• Hex Key (7/32”)

Cable Ends

1-1 Move twist ties and cable ends
up and out of the way.

Pan Head Allen Bolt
Metal Handle Assembly

1-2 P
osition the Metal Handle Assembly (Label side
up) on the Front Base Platform.
1-3 Install and completely tighten the hardware.

Hardware (1:1):

2 Pan Head Allen Bolt (3/8” X 2 1/4”)

2 Washers (3/8”)

Assembling Your Bowflex Ultimate 2
®

STEP 2
Parts:
• Handle and Base Assembly (from Step 1)
• Plastic Handle Top and Bottom
• Cable Retainer Pins (Hardware Card)
• Plastic Plug Covers

Front Handle

Tools:
• Hex Key (5/32”)

2-1 Lay the Handle and Base Assembly down on the
floor, remove the Plastic Plug Covers and
separate the Top and Bottom of the Plastic Handle.

Plastic Plug Cover (N)

Plastic Plug Cover (H)

Plastic Handle
Top

Cap Screw

2-2 Remove the Twist Ties.
2-3 Feed cables through Metal Handle and position
the Cable End Loop just inside the Hollow Tube.
You may have to slide the Hollow Tube toward
the Front Base to allow cables to reach.
2-4 I nsert Cable Retainer Pins through hole and
cable loop. (See Detail A)

Cable Retainer Pin
Hollow Tube

Plastic Handle
Bottom

Plastic Plug Cover (H)

2-5 Position Top and Bottom of Plastic Handle.
NOTE: T he hexagonal holes in the left side of the
Handle are shallower than the holes in the right
side. The #10 Nuts go in the deeper hexagonal
holes on the right side of the handle. The right
side can be identified by noting a small hole in
the plastic flange. (See Detail B)

Nut #10
Plastic Plug Cover (N)

Cable Retainer Pin through
hole and Cable End Loop

2-6 Install and completely tighten the hardware.
2-7 Install Plastic Plug Covers over hardware.
NOTE: The Plug Covers are marked on the inside with
an “N” or an “H”. To insure proper fit, use the
caps marked with an “N” to cover the nuts
and the caps marked with an “H” to cover the
screw heads.

Detail A
Note small hole in Handle
on Right side

Hardware (1:1):

2 Cap Screws (#10 X 1”)

2 Nut (#10)

2 5.27 Cable Retainer Pins

Detail B

Deeper Hole

Assembling Your Bowflex Ultimate® 2

STEP 3 – Use two people for this step!
Parts:
• Front Base Assembly
• Rear Base Platform (Box 2)

Remove Wire Ties
from Bushings

Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Rear Base
Platform
Locking Pin

3-1 Remove Wire Ties from Bushings.

Bushings

3-2 S
lide Front Base toward rear base until the
Locking Pins make contact with the side plates.
MAKE SURE the Flanges slide over the Bushings
during this procedure. (See Top Detail View)

Make sure Flanges
slide over Bushings

3-3 S
queeze the Front Handle to retract the Locking
Pins, lift the handle about 3-4 inches and push
Front Base completely into the Rear Base.
Release the handle and make sure the Locking
Pins protrude through the Side Plates.

Side Plate

3-4 I nsert the Button Head Bolt and Washer then
squeeze Front Handle and fold Front Base up to
install Inside Washer and Hex nut. Completely
tighten hardware.

Side Plate
Slide Front Base
towards Back Base
Until it Contacts Pins

Locking Pin

D
Pan Head Allen Bolt

Squeeze Handle and
Fold Front Base up
to install Nylock Nut
and Washer

TOP DETAIL VIEW

Washer

Hardware (1:1):

2 Pan Head Allen Bolt (3/8” X 3”)

TOP DETAIL VIEW

4 Washers (3/8”)

Nylock Nut

2 Nylock Nut (3/8”)

Assembling Your Bowflex Ultimate 2
®

The cables that retract the locking pins may
stretch with use. If the locking pins do not fully
retract or interfere with the side plates, make
the following adjustment.

Pull handle and position base
between the locking positions.

Cable Adjustment (Requires Two People)
1. Position the base somewhere between the two
locking positions.
2. Pull the handle until it is in the most compressed
position.
3. Place a 1/4” or adjustable wrench on the Adjusting
Barrel and use a 1/4” or adjustable wrench to loosen
the locking nut. (See Detail B)
4. Rotate the Adjusting Barrel clockwise to increase
the cable tension. The Locking Pins should be as
close to the Side Plates as possible without making
contact. (See Detail A)
5. Test the adjustment by releasing the handle and
rotating the base to a locking hole. Make sure pin
securely engages with the locking hole then pull the
handle and make sure the unit moves freely.
6. Repeat the procedure for both sides if necessary.
7. Tighten Lock Nuts against Adjusting Barrel.
Make sure Locking Pin is as close
as possible without making
contact with Side Plate

Adjusting Barrel

Detail A

Locking Nut

Detail B

Assembling Your Bowflex Ultimate® 2

STEP 4

Front Plastic Cover
Pan Head Allen Bolt

Parts:
• Base Assembly (from step 3)
• Front & Rear Plastic Base Covers (Box 2)

Washer

Tool:
• Hex Key (7/32”)
4-1 Position Plastic Covers on Front and
Rear Base Platforms.
4-2 Install and completely tighten the hardware.
Hardware (1:1):
Rear Plastic Cover

9 Pan Head Allen Bolt (1/4” X 1/2”)

9 Washers (1/4”)

STEP 5
Parts:
• Base Assembly
• Front Base Plate (Box 3)
• Front Base Feet (4) (Box 5)

Hex Washer Head Screw

Tools:

• Wrench (5/16”) • Phillips Head Screwdriver

Front Base Plate

5-1 F old the front base assembly into the
upright position.
5-2 P
osition the Base Plate and secure with
eight Phillips Head Screws and Washers.
5-3 P
osition the four Base Feet and secure with
Hex Washer Head Screws. Do not over tighten.
Feet could crack with excess pressure!

Washer
Phillips Head Screw
Front Base Foot

5-4 Completely tighten the Base Plate hardware.
Hardware (1:1):

8 Self Tapping Screws (#8 X 3/4”)

8 Washers (#8 )

4 Coach Screws (#10 X 3/4”)

Assembling Your Bowflex Ultimate 2
®

Pan Head Allen Bolt
4 3/4”

STEP 6
Parts:
• Base Assembly
• Rod Box (Box 4)

Rod Box

Tools:
• Hex Key (7/32”)
6-1 L eave Base in folded position and tilt forward to
gain access to bottom of Rear Base.
6-2 P
lace the Rod Box through Rear Base and align
with holes in base frame.

Pan Head Allen
Bolt 3/4”

6-3 I nstall the 4 3/4” screw first to hold the Rod Box in
position then install the four 3/4” screws.
6-4 I nstall the two #8 x 3/4” screws to secure the rear
base covers. Completely tighten all the hardware.

#8 x 3/4” Self
Tapping Screw

Washer

Hardware (1:1):
2 Self Tapping Screws (#8 X 3/4”)

4 Pan Head Allen Bolt (3/8” X 3/4”)

2 Washers (#8)

1 Pan Head Allen Bolt (3/8” X 4 3/4”)

5 Washers (3/8”)

STEP 7 (Requires Two People)
Rod Pack

Parts:
• Base Assembly
• Rod Pack (Box 1)

Align with slot
in Rod Box

Tools:
• Phillips Head Screwdriver

50 Lb. Rods
facing down

7-1 Leave Base in folded position from step 6.
7-2 H
ave one person align the Rod Pack with the slot
in the Rod Box with the 50 Lb. rods facing down.
7-3 Have second person Install and completely
tighten hardware.
Hardware (1:1):

3 Self Tapping Screws (#10 X 1”)

3 Washers (1/4”)

Self Tapping
Screw

Washer

Assembling Your Bowflex Ultimate® 2

After installing the Rod Box in Step 7, install the Rod Retainer.

STEP 7B
Parts:
• 1 Rod Box Retainer

Unscrew

Tool:
• Phillips Head Screw Driver
Note: Rod Box screws must be installed before
proceeding.
7B-1 Remove both screws connecting the backing
plate and the face plate (See Figure A).

Figure A

7B-2 S tand facing the rear of the Bowflex Ultimate® 2
unit. Place the backing plate (larger piece), with the
curved side facing up, in between the two right-side
50 lb. rods (See Figure B). Verify that the notched lip
of the backing plate is located in the slot of the Box
Frame.

Backing Plate

7B-3 Match up the face plate (thinner piece) to the backing
plate on the outside of the rod box. Make sure that
the notched lip of both backing plates are touching
and that the holes are aligned.
7B-4 Fasten both screws into the lined up holes (See
Figure C). Tighten until snug and then another
quarter turn.

Rod Box
Figure B

Face Plate

Figure C

Rod Box Retainer (screws are pre-installed)
Notched Lip

Qty: 2
Self Threading Screws (#10 x 1”)
Face
Place

Backing
Plate

Curved Side

Insert into slot of
Rod Box Frame

Assembling Your Bowflex Ultimate 2
®

STEP 8 (Do Not Tighten The Hardware For This Step Until Step 9 )
Parts:
• Lower Lat Tower Uprights (Box 4)
• Squat Holder (Box 4)
• Cross Brace (Box 4)

Cross Brace
Pan Head Allen
Bolt

Tool:
• Hex Key (7/32”)
8-1 I nsert Cross Brace and Squat Holder into Lower
Lat Tower Uprights. Make sure the Squat Holder
faces the the front of the Uprights. The label is on
the front and the screw holes are on the back of
the holder.

Squat Holder

8-2 Install but do not tighten the hardware until
Step 9.

Label

Hardware (1:1):
The Cross Brace is on the
front of the Uprights

2 Pan Head Allen Bolt (3/8” X 3/4”)

Lower Lat Tower Uprights

2 Washers (3/8”)
Lower Lat Tower
Assembly

STEP 9
Parts:
• Lower Lat Tower Assembly (from step 8)
• Base Assembly

Pan Head Allen Bolt
3/4”
Pan Head Allen Bolt
2 1/2”

Tools:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Nylock Nut

Washer

9-1 P
lace Lower Lat Tower over extrusions on
Base Assembly.
9-2 I nstall and completely tighten the hardware
from steps 8 and 9.

(Rod Pack Not Shown
For Clarity)

Hardware (1:1):

4 Pan Head Allen Bolt (3/8” X 3/4”)

2 Pan Head Allen Bolt (3/8” X 2 1/2”)

8 Washers (3/8”)

2 Nylock Nuts (3/8”)

Assembling Your Bowflex Ultimate® 2

STEP 10

(Rod Pack Not Shown
For Clarity)

Parts:
• Seat Rail Assembly (Box 5)
• Base Assembly

Rod Box
Assembly

Hex Nut

Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Seat Rail Assembly

Washer

10-1 Align holes on Seat Rail with holes
in Rod Box Assembly.

Pan Head Allen
Bolt

10-2 Install and completely tighten the hardware.
Hardware (1:1):

1 Pan Head Allen Bolt (3/8” X 5 1/2”)

1 Nylock Nut (3/8”) 2 Washers (3/8”)

STEP 11
Parts:
• Chest Bar (Box 4)
• Pulley Sliders (Box 4)
• Washer Plate (Box 4)

Chest Bar
Washer Plate
Pulley Slider

Tools:
• Hex Key (5/16”)
• Wrench (3/4”) - or adjustable wrench

Stop Screw

Hex Nut

Pan Head Allen
Washer
Bolt

11-1 Align holes in Chest Bar, Washer Plate and Lat Tower
Uprights.
11-2 Install and completely tighten the Chest Bar hardware.
11-3 Slide the Pulley Sliders on (with pulleys facing up and pull
knob facing the seat rail) then install and tighten the
1/4”x1/2” Stop Screws.

(Rod Pack Not Shown
For Clarity)

Hardware (1:1):
2 Nylock Nut (1/2”)

4 Washers (1/2”)

2 Pan Head Allen Bolt (1/2” X 6 3/4”)

2 Cap Screw (1./4 x 1/2”)

Assembling Your Bowflex Ultimate 2
®

NOTE: Before you continue, be sure you have a minimum of 88” (7’4”) of ceiling height to insert the
Upper Lat Assembly into the Lower Base (see step 17).
STEP 12
Pan Head Allen
Parts:
Bolt
• Left Lat Boom (Box 6)
• Rear Pulley Frame (Box 6)
• Side Plate (Box 4)

Tool:
• Hex Key (3/16”)

Side View

Left Lat Boom

Plane B

Plane A
Swivel

Washer

Side Plate
12-1 Insert RearPulley Frame into
holes in Left Lat Boom.
Make sure the Pulley Frame
Swivel is parallel to the planes
A and B shown in the Side View.

CORRECT

Plane A
Swivel

12-2 Align holes in Side Plate and Lat Boom.

Plane B

Rear Pulley
Frame

12-3 Install but do not tighten hardware.
Hardware (1:1):

INCORRECT

2 Pan Head Allen Bolt (3/8” X 3/4”)

2 Washers (3/8”)

STEP 13

Lat Bar

Parts:
• Pulley Frame Boom Assembly (from step 12)
• Lat Bar (Box 6)
Pulley Frame, Left Boom
Assembly

Tool:
• Hex Key (3/16”)
13-1 Insert left side of Lat Bar into Left Boom.
13-2 Install but do not tighten hardware.
Hardware (1:1):

1 Pan Head Allen Bolt (3/8” X 3/4”)

1 Washer (3/8”)

Pan Head Allen
Bolt

Washer

Assembling Your Bowflex Ultimate® 2

STEP 14
Parts:
• Lat Bar, Boom Assembly (From step 13)
• Right Lat Boom (Box 6)
• Side Plate (Box 4)

Right Side
of Lat Bar

Tool:
• Hex Key (3/16”)

Pulley Frame
Cross Bars

14-1 Align holes in Right Lat Boom with Rear Pulley
Frame Cross Bars and insert right side of Lat Bar
and Pulley Frame Cross Bars into Right Lat Boom.

Right Lat Boom

14-2 Align Side Plate with Right Lat Boom and install
but do not tighten hardware.
Hardware (1:1):
Pan Head Allen
Bolt
Washer

Side Plate
3 Pan Head Allen Bolt (3/8” X 3/4”)

STEP 15

3 Washers (3/8”)
Pan Head
Screw

Pan Head Allen Bolt

Parts:
• Lat Bar, Boom Assembly (From step 14)
• Top Plate (Box 6)

Washer
Top Plate

Tools:
• Hex Key (3/16”)
• Phillips Head Screwdriver
15-1 Align holes in Top Plate with Lat Bar and Booms.
15-2 Install but do not tighten hardware.

Hardware (1:1):

2 Pan Head Allen Bolt
(3/8” X 3/4”)

5 Self Tapping Screws
(1/4” X 3/4”)

2 Washers (3/8”)

5 Washers (1/4”)

Assembling Your Bowflex Ultimate 2
®

STEP 16
Parts:
• Lat Boom Assembly (from step 15)
• Upper Lat Uprights (Box 6)
Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Washer
Pan Head Allen Bolt
3/8” x 3/4”

16-1 Slide Upper Lat Uprights onto Lat Boom assembly

Pan Head Allen Bolt
3/8” x 2 1/2”

16-2 Install but do not tighten the two 3/8” x 3/4” screws
into the top of the uprights.
16-3 Install the two 3/8” x 2 1/4” Screws, Washers and
Nylock Nut through the Side Plates and into the
Uprights.

Washer

16-4 Completely tighten all of the hardware for steps
12 through 16.

Washer

Hex Nut

Upper Lat Uprights

Hardware (1:1):

2 Pan Head Allen Bolt (3/8” X 3/4”)

2 Pan Head Allen Bolt (3/8” X 2 1/2”)

6 Washers (3/8”)

2 Nylock Nut (3/8”)

Assembling Your Bowflex Ultimate® 2

STEP 17 – Upper Assembly is very heavy!
Use two people for this step!
Parts:
• Upper Lat Assembly (from step 16)
• Base Assembly (from step 11)

Upper Lat Assembly

Tool:
• Hex Key (7/32”)

(Rod Pack Not Shown
For Clarity)

Pan Head Allen
Bolt

17-1 Insert Upper Lat Uprights into Lower Lat Uprights.

Washer

17-2 Install and completely tighten the hardware.

Base Assembly

Hardware (1:1):

8 Pan Head Allen Bolt (3/8” X 3/4”)

8 Washers (3/8”)

STEP 18
Parts:
• Front Face Plate (Box 6)
• Assembled Unit (from step 17)

Pan Head Allen
Bolt

Tool:
• Hex Key (7/32”)

Washer

18-1 Align holes in Face Plate and Uprights.
18-2 Install and completely tighten hardware.

Hardware (1:1):

4 Pan Head Allen Bolt (3/8” X 3/4”)

4 Washers (3/8”)

Front Face Plate
Lat Tower Uprights

(Rod Pack Not Shown
For Clarity)

Assembling Your Bowflex Ultimate 2
®

STEP 19
Parts:
• Squat Frame (Box 2)
• Shoulder Bars (Box 2)

Right Shoulder Bar
(has handle and cable)

Left Shoulder Bar

Button Head Screw
(1/4” x 3/4”)

on
r
F

5/16” Nylock Nut

Tool:
• Hex Key (3/16”) and (5/32”)
• Wrench (1/2”) & (7/16”) - or Adjustable Wrench
19-1 Position Shoulder Bars against back of
Squat Frame with bend in arms pointing
towards the front of the frame.

1/4” Nylock Nut

19-2 Install and completely tighten the side screws,
washers and nylock nuts.

Squat Frame
Washer

19-2 Remove the hardware securing the Lock Pin
Assembly to the Squat Frame.

Side Screw
Button Head (5/16” x 1 3/4”)

Lock Pin Assembly

19-3 Align holes in Lock Pin Assembly and
Squat Frame.
19-4 Re-install and completely tighten Lock Pin
Assembly hardware.
Hardware (1:1):

4 Pan Head Allen Bolt (5/16” X 1 3/4”)

8 Washers (5/16”)

4 Nylock Nut (5/16”)

Cable Adjustment
The Release Cable should be adjusted so
that there is enough tension to keep the
cable from laying on the metal frame. In
most cases this adjustment will be fine out
of the box. If the cable needs adjustment,
loosen the locknut and turn the Adjusting
Barrel counter-clockwise until cable is taut.
The release cable may stretch with use.
Check the cable tension regularly and
adjust if needed.

Lock
Nut

Release Cable

Adjusting Barrel

Metal Frame

Assembling Your Bowflex Ultimate® 2

STEP 20
Parts:
• Squat Assembly (from step 19)
• Squat Back Pads (Box 2)
Tool:
• Hex Key (3/16”)

Pan Head Allen
Bolt

Washer

20-1 Align holes in Squat Back Pads and
Squat Assembly.
20-2 Install and completely tighten hardware.
Squat Back
Pad

Hardware (1:1):

4 Pan Head Allen Bolt (5/16” X 2 1/4”)

4 Washers (5/16”)

End Cap

STEP 21

Leg Extension Pivot Arm
Assembly

Parts:
• Leg Extension Pivot Arm Assembly (Box 7)
• Roller Pads (Box 7)
• Webbing with Steel Ring (Box 7)
• Roller Shaft (Box 7)
• End Caps (Box 7)
21-1 Insert Roller Shaft through hole in one of
the rectangular arms. Place the Webbing with Steel Rings between the two
rectangular arms, and continue to slide
the Shaft through the Webbing and hole
in opposite arm.

Webbing with Steel Rings

Roller Shaft

21-2 Slide Roller Pads and End Caps onto Roller Shaft.

Roller Pad

Assembling Your Bowflex Ultimate 2
®

Ab Crunch Pivot
Arm

STEP 22 (optional attachment)
Parts:
• Ab Crunch Frame (Ab Box)
• Ab Crunch Pivot Arm (Ab Box)

Pulley
pointing
away

Pivot Arm pointing to right

Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Washer

Nylock Nut

22-1 Place Ab Crunch Frame on floor with hooks
on the top and pulley end pointing away
from you.
22-2 Align Ab Crunch Pivot Arm on Ab Crunch
Frame with the pivot mechanism to the right
side as shown.

Pan Head Allen
Bolt
Ab Crunch Frame

22-3 Install and completely tighten hardware.
Hooks on top

Hardware (1:1): Hardware for this step is in the hardware bag in the AB BOX.

2 Pan Head Allen Bolt (3/8” X 4”)

STEP 23

4 Washers (3/8”)

2 Nylock Nuts (3/8”)

Ab Handle Bars

Parts:
• Ab Crunch Assembly (from step 21)
• Ab Handle Bars (Ab Box)

Nylock Nut

Washer

Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench
23-1 Place the Ab Handle Bars on the Ab Pivot Arm with
the Handle Bars pointing toward the same side as
the hooks on the Ab Frame as shown.
23-2 Install and completely tighten hardware.

Pan Head Allen
Bolt

Ab Frame

Hardware (1:1): Hardware for this step is in the hardware

Hooks

bag in the AB BOX.

2 Pan Head Allen Bolt (3/8” X 3”)

4 Washers (3/8”)

2 Nylock Nut (3/8”)

Assembling Your Bowflex Ultimate® 2

STEP 24

Middle Pad

Parts:
• Ab Crunch Assembly (from step 22)
• Ab Back Pad (Ab Box)
• Roller Pads (Ab Box)
• Middle Pad (Ab Box)
• Roller Pad Shaft (Ab Box)
• End Caps (Ab Box)

Roller Pad

Roller Pad
Shaft
Ab Back Pad

Tool:
• Hex Key (3/16”)

Bracket Arms
End Cap

24-1 Place the Middle Pad between the arms on the
bracket. Slide the Roller Pad Shaft through bracket
and the Middle Pad then install Roller Pads and
End Caps.
24-2 Align the Ab Back Pad with the wider end pointing
toward the Handlebars.

Pan Head Allen Bolt

Washer

24-3 Install and completely tighten hardware.
Hardware (1:1): Hardware for this step is in the
hardware bag in the AB BOX.

4 Pan Head Allen Bolt (5/16” X 1”)

4 Washers (5/16”)

STEP 25
Parts:
• Ab Crunch Assembly (from step 23)
Tool:
• Wrench (1/2”) - or Adjustable Wrench
25-1 Undo the 1/2” bolt from the bracket at the upper
end of the cable and use the same 1/2” bolt to
attach the bracket to the tab on the Pivot Arm.

Ab Pivot Arm
Tab

Bolt

Assembling Your Bowflex Ultimate 2
®

STEP 26
Parts:
• Seat Frame (Box 7)
• Leg Extension Seat Pad (Box 7)

Pan Head Allen
Bolt

Washer

Seat Frame

Tool:
• Hex Key (3/16”)

26-1 Align holes in Leg Extension Seat Pad
and Seat Frame.
26-2 Install and completely tighten hardware.

Hardware (1:1):

Leg Extension
Seat Pad

Hardware for this step is in the
hardware bag in BOX 7

4 Pan Head Allen Bolt (5/16” X 1”)

4 Washers (5/16”)

STEP 27
Parts:
• Preacher Curl Frame (Box 7)
• Preacher Curl Pad (Box 7)
Tool:
• Hex Key (3/16”)

Pan Head Allen
Bolt

Preacher Curl
Frame

27-1 Align holes in Preacher Curl Pad and
Preacher Curl Frame.
27-2 Install and completely tighten hardware.

Hardware (1:1):

Hardware for this step is in the
hardware bag in BOX 7

Preacher Curl
Pad

Washer

4 Pan Head Allen Bolt (5/16” X 1”)

4 Washers (5/16”)

Installing Your Bowflex Ultimate® 2 Cables

Cable Installation STEP 1
Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Slide Ball Back
Cable End

a. Uncoil cable from Upper Pulley Slider.
b. Remove Ball Stop from the end of cable that is to
be routed through pulleys by sliding the outer ball
back from the cable end and pushing out the slotted
insert. Slide the ball off of the cable and set aside.
(See Figure A)
c. R
emove the pulley from the Upper Pulley Bracket,
wrap the cable over the pulley (See Figure B) and
reinsert the pulley back into the Upper Pulley
Bracket. Make sure the cable is inside the Side
Plate before moving on to STEP 2. (See Figure C)

Remove Slotted Insert

Figure A

Cable Routed Inside
Side Plate

Remove Pulley from
Upper Pulley Bracket

Pulley
Route Cable
Over Pulley
Replace Pulley and Hardware
with Cable

Figure B

Figure C

Installing Your Bowflex Ultimate 2 Cables
®

Floating Pulley Assembly

Single Pulley Assembly
Cheeks

Cable Installation STEP 2

Button Head Screw

Tool:
• Hex Key (7/32”)

Pulley

a. In Box 4 Locate a Floating Pulley Assembly and a
Single Pulley Assembly with two Cheeks.
(See Figure A)

Washer

Figure A
(Rod Pack Removed For Clarity)

b. F eed the cable through the Floating Pulley Assembly.
(See Figure B)
c. R
oute the cable behind the Side Plate and wrap over
the Single Pulley Assembly. (See Figure C)
d. I nstall Single Pulley with cable on the back side of
the Lat Tower as shown. (See Figure D)

Wrap Cable Over
Single Pulley Assembly

Route Cable Through
Floating Pulley Assembly

Figure B

Washer
Pan Head Allen Bolt
Route Cable Through
Behind Side Plate

Figure C

Figure D

Installing Your Bowflex Ultimate® 2 Cables

Cable Installation STEP 3
a. R
oute Cable down and thread through Pulley
Slider on Chest Bar. (See Figure A)
b. Replace the Ball Stop. (See Figure B and C)
(Rod Pack Removed For Clarity )

Pulley Slider

(Rod Pack Removed For Clarity )

Slotted Insert
Ball Stop

Chest Bar

Figure A

Figure B
Slide Ball tightly against
Insert and Cable End

Cable End

Replace Slotted Insert

Figure C

Installing Your Bowflex Ultimate 2 Cables
®

Cable Installation STEP 4
Tool:
• Hex Key (7/32”)
a. U
ncoil the Cable from Lower Pulley and remove the
Ball Stop. (See Step 1/Figure A)
b. I n Box 4, locate a Single Pulley Assembly with one
Cheek. Wrap the Cable under the Pulley and feed the
Cable through the hole in the Rod Box. (See Figure A)
Rod Box

Single Pulley

c. Install the Single Pulley (See Figure B) making sure
the cable is between the Pulley and the small Metal
Post on the Pulley Bracket.
(See Top View of Angled Pulley)
d. F eed the Cable through the lower half of the Floating
Pulley Assembly.

Lower Pulley

Figure A

Floating Pulley
Assembly
Pulley Bracket

Metal Post
Cable
Pulley

Top View of
Angled Pulley

Figure B

Installing Your Bowflex Ultimate® 2 Cables

Cable Installation STEP 5
Tool:
• Hex Key (7/32”)
• Wrench (9/16”) - or Adjustable Wrench

Floating Pulley

a. Observe the Cable routing in Figure A.
b. U
nscrew the Nut and pull the Long Screw out just
enough to angle the Pulley Assembly and allow the
Cable to thread between the Rod and the Pulley.
(See Figure B) Leave the Long Screw loose until you
have routed the Cable on the other side of the unit.

Cutaway of
Rod Box

Figure A

Floating Pulley
Long Screw
Cable
Hex Nut
Washer

Rod

Figure B

Installing Your Bowflex Ultimate 2 Cables
®

Cable Installation STEP 6

Cheeks

Tool:
• Hex Key (7/32”)

Cable Retainer
Bracket

a. In Box 3, Locate a Single Pulley Assembly with two Cheeks and a
Cable Retainer Bracket. (See Figure A)
b. Extend the Cable to the front of the unit.

Button
Head
Screw

Pulley

c. R
oute the Cable under the Pulley and attach the
Pulley to the Frame in front of the Bench Support.

Figure A

NOTE: Make sure the Bracket is oriented as shown. (Detail C)
d. Replace the Ball Stop. (See Figure C and D )

Bench Support
Pulley
Cheek

Detail C

Button Head Screw
Cable Retainer Bracket

Figure B
Slide Ball Tightly Against
Insert and Cable End

Cable End

Slotted Insert

Ball Stop
Replace Slotted Insert

Figure C

Figure D

Repeat Cable Installation Steps 1-6 for the cables on the opposite side of the unit.

Installing Your Bowflex Ultimate® 2 Squat Attachment

Install Squat Attachment
1. M
ake sure the Seat T Handle is Locked in position on
the Seat Rail. (See Figure A)
2. F old Seat Rail up and insert Squat Holder into the
Round Hole on the Seat Rail. Make sure the Squat
Holder locks securely into Seat Rail. (See Figure C )

Locked
Seat T Handle

3. H
ook the lower Hook on the Squat Attachment up
onto the lower Post on the Seat Frame.
4. R
otate Squat Attachment up until it locks into place.
(See Figure D)

Unlocked

Figure A

(Continued on page 33)
Squat Holder

Seat Rail
Seat Rail
Round Hole

Figure B

Figure C

Squat Attachment

Lower Hook

Rotate Up

Seat Frame

Figure D

Lock Into Place

Installing Your Bowflex Ultimate 2 Squat Attachment
®

Install Squat Attachment
(Continued from page 32)
6. E xtend the Cable from the Chest Bar Sliding Pulley to
the Hooks on both sides of the Squat Attachment.
(See Figure E)
Hook

Cable
Sliding Pulley
Chest Bar

Figure E

Operating Squat Attachment
1. Unlock Seat T Handle. (See Figure A)
2. S
tand under Squat Attachment with Shoulder Pads
resting on shoulders.
3. P
ull the Release Handle out and rotate it forward
to allow the Squat Attachment slide freely on the
Seat Rail. (See Figure F)
Note: The Squat Attachment will not slide
downward until you push upward to
release the safety lock.

Installing Your Bowflex Ultimate® 2 Leg Extension Attachment

Install Leg Extension Attachment
1. P
lace Hooks on Leg Extension Attachment over
Posts on Seat Rail Support and press down into
position. (See Figure A)
2. A
ttach Cables to Cable Hooks at the bottom of the
Leg Extension Attachment. (See Figure B)
Leg Extension Attachment

Hook
Post

Figure A

Leg Extension Attachment

Cable Hook

Figure B

Installing Your Bowflex Ultimate 2 Leg Extension Seat and Preacher Curl
®

Install Leg Extension Seat

Leg extension Seat

1. P
lace Hooks on Leg Extension Seat Frame over the
posts on the Leg Extension Attachment.
Leg extension
Seat Frame

Hook

2. M
ake sure the Cross Bar on the Seat Frame rests in
the Bracket on the Sliding Seat Frame.

Post

Bracket

Install Preacher Curl Attachment

Preacher Curl Attachment

1. P
lace Hooks on Preacher Curl Attachment over the posts
on the Leg Extension Attachment.
2. H
ook the Curl Bar to the Webbing attached to the Roller
Pad Bar on the Leg Extension Attachment.

Hook

Curl Bar
Post

Webbing

Installing Your Bowflex Ultimate® 2 Bench and Ab Crunch Attachment

Install Bench
1. P
lace Cross Brace in Bracket on Sliding Seat and lay
Bench on Seat Rail.

Bench

Sliding Seat

Seat Rail

Bracket

Install Ab Crunch Attachment (Optional Attachment)
1. P
lace Hooks on Ab Crunch Attachment over the
posts on the Seat Rail Support and press down
into position.

Ab Crunch Attachment

2. A
ttach Cables to Cable Hooks at bottom of
Ab Crunch Cable.
Hook

Cable Hooks

Post
Seat Rail Support

Installing Your Bowflex Ultimate 2 DVD Player
®

Install DVD Player (Optional Attachment)
Tool:
• Small Phillips Head Screwdriver
1. A
ttach the DVD Player to the two DVD Player
Brackets using the four small Phillips Head Screws
provided in the Bracket packaging. (See Figure A)

Phillips Head Screw

Bracket

2. R
emove the Rubber Cover from the Face Plate. (See
Figure B) Insert the DVD Player Bracket into the slots
in the Face Plate. (See Figure C)
Note: The three slots in the DVD Bracket provide
three possible angles for viewing.

Face Plate
Face Plate

Bracket

Remove
Rubber Cover

DVD Player
Use Slots
To Adjust View
Angle

DVD Player

This manual is written and designed
by industry professionals. If you
have any questions regarding
your Bowflex Ultimate® 2 or any
instructions found in this manual,
please call 1-800-605-3369 for
assistance.

(Shown with optional accessories)

©2008. Nautilus, Inc. All rights reserved. Nautilus, Bowflex, the Bowflex logo, Bowflex Ultimate and Power Rod are either registered trademarks or trademarks of Nautilus, Inc.
Nautilus, Inc., World Headquarters, 16400 SE Nautilus Drive, Vancouver, WA 98683 1-800-NAUTILUS www.nautilus.com

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Create Date                     : 2008:09:30 15:22:05-07:00
Metadata Date                   : 2008:09:30 15:24:49-07:00
Modify Date                     : 2008:09:30 15:24:49-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.3)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 11316 bytes, use -b option to extract)
Instance ID                     : uuid:d71c7bef-426e-42a5-908e-b892cb3e4a88
Document ID                     : adobe:docid:indd:c54132c3-89c5-11dd-8189-f7650a36de97
Rendition Class                 : proof:pdf
Derived From Instance ID        : c54132c2-89c5-11dd-8189-f7650a36de97
Derived From Document ID        : adobe:docid:indd:a6481252-2c6f-11db-af67-d509de90590a
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 150.00, 180.00, 72.00, 72.00, 72.00, 180.00, 72.00, 180.00, 150.00, 72.00, 180.00, 300.00, 72.00, 72.00, 150.00, 150.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 150.00, 180.00, 72.00, 72.00, 72.00, 180.00, 72.00, 180.00, 150.00, 72.00, 180.00, 300.00, 72.00, 72.00, 150.00, 150.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:6AFD30640066DB11827686AF4BA1FBD6, uuid:15CE702E388BDD11AD82C69F87700F87, uuid:91ee8926-967c-11d9-8455-000d933e5606, uuid:B10CA43ED23EDC11AD3B91F1E3028650, uuid:D9DF9896FB00DD11A9B9E1899A305577, uuid:90ccee40-9488-48d0-83fb-8309f7bbaa53, uuid:92f574e9-ec7b-4aaf-98b7-912fe6a401f7, uuid:f23c2bb3-b820-4a17-82a9-f9a4a0ff7f7b, uuid:4B9A8F46FC00DD11A9B9E1899A305577, uuid:d6e3e8d4-82b9-4560-b6e1-dc3eb30e4152, uuid:4A093B7CD200DD11A9B9E1899A305577, uuid:B10CA43ED23EDC11AD3B91F1E3028650, uuid:058c42fc-a39d-4079-beac-d7a956ad8a90, uuid:4B9A8F46FC00DD11A9B9E1899A305577, uuid:67DA99F8520ADD11A5B79F2E38507773, uuid:653fdd2d-f98f-4a36-82d0-478cdb6258c1, uuid:90ccee40-9488-48d0-83fb-8309f7bbaa53, uuid:B10CA43ED23EDC11AD3B91F1E3028650, uuid:B10CA43ED23EDC11AD3B91F1E3028650, uuid:DBE6851C0966DB11ADA6E97483304229, uuid:26D0A2B00966DB11ADA6E97483304229, uuid:22D0A2B00966DB11ADA6E97483304229, uuid:1ED0A2B00966DB11ADA6E97483304229, uuid:11affa2c-aad5-4e1a-9077-b71dbe97a469, uuid:6c16d88e-108f-4bd9-ac6a-f2a999e2e34c, uuid:c0208c36-e3b2-4506-bf1e-4980b41be86a, uuid:b43af683-af52-422f-8134-4d194e11d2fe, uuid:287561a6-9c3b-4d42-91ae-501e3ebf0fb8, uuid:27d57218-3ebe-49cd-92fd-0eaf0b648b8a, uuid:33d0e736-e903-4c4c-a80b-5998621307ae, uuid:bb097c61-45a9-40ff-a849-4e936f714635, uuid:e50c27eb-adee-412e-9453-464921164e1f, uuid:c17a3755-4c1a-4499-9f97-b184974035e6, uuid:124e20b9-a809-434a-bda1-f718f81cc6ad, uuid:525b8389-9b33-4e28-8042-70a6d465d4fd, uuid:b86a2769-a753-4882-a168-a9c907c8b91c, uuid:89c62fd6-844d-4cf7-9018-4056940fc413, uuid:38a8ad1f-ec38-439b-ab48-4dbccffa251a, uuid:36b0fca0-575e-4e1a-b2d3-9eefc239b983, uuid:c3fcfa2a-9183-46f9-9374-98ecb4eb4a84, uuid:f6336c1c-d438-4d5d-8f0d-323057135eed, uuid:ccae0d43-ad5b-419a-acc4-e9b9b17050a5, uuid:d1918b31-f839-486d-9ddd-af35916a1315, uuid:2bbc9243-09f7-4cc7-b760-076cc1d7a32a, uuid:5f9ac0da-5508-4ffb-8885-d150bee14a43, uuid:6ce4d4cb-8580-4cd6-af47-6bba42f11c54, uuid:3666b199-a723-489c-8e3e-f80957551c62, uuid:5f4c5958-fe02-4f35-b1cf-8ccb66637262, uuid:362b0b03-5901-4c76-b22e-05fc5e2b86f6, uuid:4fd499c3-8bbd-44e1-99d3-753d18745d3d, uuid:2e8108a3-5bc5-4182-9019-3a2d2f46f632, uuid:cc9124b4-44b7-4c0e-9d74-33b09f0a8e44, uuid:3f18261a-c403-49dc-adc2-9f9641f9e215, uuid:103e3db3-af24-494c-90bf-090d09b62c44, uuid:a7da4e2e-97df-11d9-a9d7-000d933e5606, uuid:7856ae2e-b82b-4996-ab42-a2b948e92797, uuid:b22ad40f-f44b-4056-a804-a049ea190f17, uuid:f551b2a8-eceb-4f1d-9b19-7abbe2c83b81, uuid:e93da4ed-ba22-47be-ab1e-fce6cf8cd0f9, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:229f02b1-7288-441d-a0dc-4747c289e69b, uuid:7856ae2e-b82b-4996-ab42-a2b948e92797, uuid:643ccad1-cb85-42bc-a654-560ebd5591fa, uuid:4e88e499-b4d4-46da-95c1-eb1acc5896af, uuid:f551b2a8-eceb-4f1d-9b19-7abbe2c83b81, uuid:e50c27eb-adee-412e-9453-464921164e1f, uuid:858f1522-c37f-4768-88d4-c15f7ff97518, uuid:e55b03cc-20fd-4984-bcda-8b1a2f84cf80, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:c63cba6e-949e-4ec0-b324-301d7670be1f, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:ebca18ad-c8db-4c7c-8821-62e9ccf52787, uuid:1c17739d-a892-4b1e-ba23-f2bd69c3c722, uuid:6ab8bc39-9847-48eb-aa9c-61326e68ff5b, uuid:52a50f6e-3513-4d76-baa9-f2fb63b6c858, uuid:a015dc32-fd9c-4514-b9a3-86672538669f, uuid:67491e44-bea6-4e47-bc59-32fd3aa0bdad, uuid:5a9757c4-960d-4dd8-9193-26cfe9462858, uuid:b2313782-e933-43ba-aa92-e80f5e46bd4b, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:d2e87f29-c548-4f70-ae93-58720f295e8f, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:1301135d-b658-43a6-af89-ec867668dbbd, uuid:1a24855c-5f4f-46b9-9cc1-2514fdd2a470, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:cf818ab6-4e15-410a-af14-8c80bc4b2f02, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:2e2de3d0-9c78-4aaa-a2a6-7021a5d99e7d, uuid:0424eddd-86c8-49ea-b86e-4d394efd2018, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:ecdcd4bc-50d8-4099-bdbb-244acd359c37, uuid:ebca18ad-c8db-4c7c-8821-62e9ccf52787, uuid:4fd75d82-532a-4357-8fc1-e62fa82e0779, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:3d624f10-7437-4f0c-abe2-dc616d318d26, uuid:44cc29ef-0ae8-4d8b-8cc8-2af04587e149, uuid:09b79c64-5fa5-42a3-9bd9-1054ddd80ee4, uuid:29a2b995-deaa-4825-a17f-95d753957081, uuid:3970b4ba-f27a-45a2-b5b8-5a4a907b7e81, uuid:2294793e-ce7e-406c-a4d7-55d998102679, uuid:f513b9e4-b147-454c-8f28-fb01fb7de5ad, uuid:660f8bda-cccc-4973-aa95-830c66c019a8, uuid:92fa842d-31a8-455e-9678-31eaab6e220c, uuid:e8a48f8c-97e0-11d9-a9d7-000d933e5606, uuid:71c34e5f-e43b-4e40-998d-56c389725870, uuid:b025cf3f-bbcc-4173-b13c-bc780ef45be8, uuid:e8739c57-1c2f-4c78-b7cc-b95f0a56ceeb, uuid:8596f921-5cbd-4584-b1ba-740e42b6a431, uuid:ec9dd147-a17f-4258-9321-3b650ee04ff4, uuid:619b78a5-251f-4904-b7ed-6a7fd72ff69c, uuid:6fc47e98-0813-4ab4-bb51-72eeb6e32cec, uuid:8596f921-5cbd-4584-b1ba-740e42b6a431, uuid:8596f921-5cbd-4584-b1ba-740e42b6a431, uuid:3bc20450-c88f-45a7-9a80-44b01babb3a5, uuid:a09d23f2-67b9-4027-b65c-227d5176d6d2, uuid:e7bec456-1eb7-4cfa-b6b0-db19be3860f4, uuid:82a9103e-c116-46d0-affe-d389b2c86dab, uuid:ed51a035-cfc8-4569-a986-c7143c1b122e, uuid:0885c842-602d-44ae-8ed1-3b5c1e429a8d, uuid:3627f322-71f0-4fd1-a5cc-5a9ba5ad3c1a, uuid:3bc20450-c88f-45a7-9a80-44b01babb3a5, uuid:ee7cf089-922b-4a60-a207-e52d1073c06f, uuid:83eb786f-1472-450f-982e-618f7ba345ff, uuid:04d6317b-5913-4e54-bc0f-42fd4d7d010a, uuid:021ab996-4316-41bc-bd4a-23fce8241017, uuid:a649a809-9062-4c88-aa43-2c764dc629a7, uuid:cf89cf21-97e3-11d9-a9d7-000d933e5606, uuid:73239e95-97e3-11d9-a9d7-000d933e5606, uuid:bad49bcd-6c8b-4c55-8839-44577d4077d7, uuid:4f510f59-c111-431c-970b-52fe6884d8a6, uuid:f4046321-7a62-4f0c-ae22-eb8b72e7a952, uuid:3bc20450-c88f-45a7-9a80-44b01babb3a5, uuid:bad49bcd-6c8b-4c55-8839-44577d4077d7, uuid:d0227dd8-0320-4760-b10e-a3cf4ae32db3, uuid:2a33e6e6-f1fe-4df9-afeb-5d344cfe0b59, uuid:145af7c6-94d4-43c2-978c-b575431f95f7, uuid:e74dafb5-61dd-4812-be28-2a28683debeb, uuid:d58d2d77-9854-4290-91c0-012b96669dea, uuid:d931cbc6-bade-47d2-ac6a-52694e3121d6, uuid:a78e1166-f3e1-41fe-8b50-1273e472ba82, uuid:2786954e-9731-11d9-a678-000d933e5606, uuid:e998bc26-c02e-427a-bfe1-73c887c63e7c, uuid:27fadcd8-69e8-428b-91ca-b755afa0a18b, uuid:af6849d1-52c0-4dcd-8bb1-1869cf33200d, uuid:1ffad6aa-abe3-4e32-ba9b-6f2ec6f0abc9, uuid:9b0dc1b9-6b65-458a-b346-ea87c586d91a, uuid:3080948e-8a9b-4968-8178-94709388ebee, uuid:615d0e3d-3499-4254-96b9-1e0964a4cc30, uuid:4d313b3d-ffd5-49cd-9b3a-44cc5818d072, uuid:04f7c748-058e-4766-ae1b-d8f2ae276963, uuid:aff68dbc-1942-47d6-a2e9-ab0cde40c061, uuid:66FD30640066DB11827686AF4BA1FBD6, uuid:b639eb23-05d7-11d9-869f-000393d45ef8, uuid:15CE702E388BDD11AD82C69F87700F87
Manifest Reference Document ID  : uuid:69FD30640066DB11827686AF4BA1FBD6, uuid:14CE702E388BDD11AD82C69F87700F87, uuid:b8e9f72a-01ea-11d9-b4a8-000393d45ef8, uuid:F391D840E8FFDB11BE25F2CAF97A2EAE, uuid:D5DF9896FB00DD11A9B9E1899A305577, uuid:8268ADADE707DD118000D160542379E6, uuid:26B32D7AFD07DD118000D160542379E6, uuid:27D1437A1608DD11B8758ADD54A34622, uuid:891FD8C5D200DD11A9B9E1899A305577, uuid:8181EB84D800DD11863A829189AC96AF, uuid:49093B7CD200DD11A9B9E1899A305577, uuid:F391D840E8FFDB11BE25F2CAF97A2EAE, uuid:5C4888A83D0ADD118F9E97C3A8B14DB8, uuid:891FD8C5D200DD11A9B9E1899A305577, uuid:66DA99F8520ADD11A5B79F2E38507773, uuid:7015D8C6560ADD118F9E97C3A8B14DB8, uuid:8268ADADE707DD118000D160542379E6, uuid:F391D840E8FFDB11BE25F2CAF97A2EAE, uuid:F391D840E8FFDB11BE25F2CAF97A2EAE, uuid:DAE6851C0966DB11ADA6E97483304229, uuid:25D0A2B00966DB11ADA6E97483304229, uuid:21D0A2B00966DB11ADA6E97483304229, uuid:1DD0A2B00966DB11ADA6E97483304229, uuid:146599c0-bcb9-4ad6-b2c4-0f54f765273c, uuid:88A4934C8568DC11BACEF77D5BED8ADB, uuid:923cee7e-90fc-11d9-af3c-000d933e5606, uuid:b2de0220-9d12-4409-b9df-d91cc8917ff9, uuid:b2de0220-9d12-4409-b9df-d91cc8917ff9, uuid:2ff0bcd2-a8d6-43a0-bcb0-78e701bdc36c, uuid:491b2af6-6bcc-421b-ae5f-79f4190d200b, uuid:188d2555-24de-473e-86ed-f2f68fa9e9d3, uuid:e73c1874-481f-4dc5-b448-6374d3f8a6ff, uuid:9b35bf62-5163-42a4-90bf-8b5b1253b0b8, uuid:b7b92a12-f97f-4810-a624-7df7168e492a, uuid:2aa64f77-3676-4817-b8cd-98b458a16b6b, uuid:6fff1637-3bce-4733-aaff-44f68436c2cd, uuid:2a66d4eb-0b99-44f5-adb5-4e96956ec5d6, uuid:bf49eed2-4393-4ae5-9560-952656e3942a, uuid:5f38249e-6a49-4f9a-bc4b-7f0e91cecf24, uuid:081b467c-f94f-4271-9628-ea05d72c4ff1, uuid:09042eda-deac-451b-b7ec-b4b4052ec521, uuid:88A4934C8568DC11BACEF77D5BED8ADB, uuid:86A4934C8568DC11BACEF77D5BED8ADB, uuid:5f6f6603-6bb0-46e0-b450-1e57e930a6df, uuid:6e882ae3-9699-470e-9d9a-b18cb42cc3ab, uuid:2962266d-1c08-40e8-9db7-c8a485131f48, uuid:449c6fa5-a214-4eec-a30c-40abd5f8eea6, uuid:69edf6c2-e702-4afc-a16c-0937b628b4ea, uuid:b3606e69-3c49-4c96-adbd-0922f1a7a6d2, uuid:964ee0bc-c719-4735-96b8-c4e2bf940aea, uuid:7f728443-d5a6-4240-941f-9ffb2d43b6f8, uuid:036caec8-4338-4b21-8b8b-9604e12f4c75, uuid:513bfbd2-e9aa-4f39-a83a-e68e3c65056f, uuid:a2b803ae-d7af-4c20-9f3e-bbc2f2a10d97, uuid:4e71606e-78be-4fe5-bd3a-8df5dfcb2de6, uuid:2962266d-1c08-40e8-9db7-c8a485131f48, uuid:5b928e45-fe31-4ed0-9c48-6273b10c1c2d, uuid:4126a5e6-4022-4bf1-9d32-a72d4f0b1872, uuid:83e3630f-a25d-46a9-b8a0-4ef8de18e0b7, uuid:09e0c8d0-71fc-476a-9cab-5326270aeb62, uuid:26cd2a05-5c5d-444a-82ad-ff163f301529, uuid:bb6af863-566e-4aaf-a79a-06a5b80d7882, uuid:068a4a30-703d-473c-ada1-5fca8ff37650, uuid:7d27c3a7-3404-41d0-a473-fce7dcd7bcbd, uuid:25257f5c-aaec-428c-9f12-bdc346ba86a3, uuid:7e3bce44-162a-455d-a13c-94add517a7c5, uuid:dce8dbbe-af0f-4ecd-954f-56c8e0ba81e9, uuid:25257f5c-aaec-428c-9f12-bdc346ba86a3, uuid:25257f5c-aaec-428c-9f12-bdc346ba86a3, uuid:ccf47398-6736-4d00-a143-0008d0e3c4c3, uuid:169e3b53-be29-41a8-a7ac-dcca722cf734, uuid:1bf3855e-54b4-4022-a0c5-39d847663845, uuid:68d86621-b467-4e8d-a784-87508bd993b8, uuid:acd7176c-84fd-4774-8340-6ee040eb5c92, uuid:e76c73f9-cac0-4fce-8cab-3b2cbb1e6d44, uuid:61e62aca-97e3-11d9-a9d7-000d933e5606, uuid:E887CC3D639EDA11AB1AA071A6B48467, uuid:E687CC3D639EDA11AB1AA071A6B48467, uuid:E487CC3D639EDA11AB1AA071A6B48467, uuid:E887CC3D639EDA11AB1AA071A6B48467, uuid:239c4a46-3b72-4b8a-a248-74a0f305c130, uuid:079e563a-c211-4ccc-abd7-b24ea34d8a65, uuid:2028f3b6-e1ae-492c-b79f-67e65af6f55a, uuid:90520b3b-edb7-4179-b4aa-8d44c6cc8aa1, uuid:5ca071b8-f948-4782-978c-6321547c2741, uuid:d20202df-719a-4776-a771-db7b2b27a3e4, uuid:83a55a7e-3328-44d0-abf1-8d7c3748b20d, uuid:a11a8941-431c-4433-a8fc-aba1903497df, uuid:e8e3d898-be56-4942-801e-0a1996b92931, uuid:05df1721-dff2-4f4c-aa9d-9342e5cc9b5d, uuid:05df1721-dff2-4f4c-aa9d-9342e5cc9b5d, uuid:6F6DDC190066DB11827686AF4BA1FBD6, uuid:b8e9f72a-01ea-11d9-b4a8-000393d45ef8, uuid:14CE702E388BDD11AD82C69F87700F87
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 48
Creator                         : Adobe InDesign CS3 (5.0.3)

EXIF Metadata provided by EXIF.tools

Bowflex Ultimate 2 Owner S Manual

Assembly Manual BFX_Ultimate2_AM_RevC_web Bowflex Product Manuals | Bowflex

Bowflex Ultimate 2 Home Gym Assembly Manual assembly_ultimate2 Troubleshoot Bowflex Ultimate 2 Home Gym Assembly |

Assembly Manual BFX_Ultimate2_AM_RevC_web Bowflex Product Manuals | Bowflex

Navigation menu

Versions of this User Manual:

Views

Navigation