Braun Bs 8995 Users Manual 5646448__8995_Japan
BS 8995 to the manual 5a07d154-71b6-0d34-7595-74469e8486e9
2015-02-02
: Braun Braun-Bs-8995-Users-Manual-409143 braun-bs-8995-users-manual-409143 braun pdf
Open the PDF directly: View PDF 
.
Page Count: 31
| Download | |
| Open PDF In Browser | View PDF |
Activator 8995 KURTZ DESIGN 21.04.05 auto s elect on off 5646448_Complete_8995_Japan Seite 1 Donnerstag, 27. September 2007 8:38 08 clean eco normal a n in g cartridge fix intensive full 8995 trim empty www.braun.co.jp 5646448_Complete_8995_Japan Seite 2 Donnerstag, 27. September 2007 8:38 08 2 5646448_Complete_8995_Japan Seite 3 Donnerstag, 27. September 2007 8:38 08 STOP 3 5646448_Complete_8995_Japan Seite 4 Donnerstag, 27. September 2007 8:38 08 4 5646448_Complete_8995_Japan Seite 5 Donnerstag, 27. September 2007 8:38 08 5 5646448_Complete_8995_Japan Seite 6 Donnerstag, 27. September 2007 8:38 08 6 5646448_Complete_8995_Japan Seite 7 Donnerstag, 27. September 2007 8:38 08 7 5646448_Complete_8995_Japan Seite 8 Donnerstag, 27. September 2007 8:38 08 1 2 3 4 9 au to se lec t clean 10 6 ning idge 7 full 11 empty 12 12 off 13 fix on 14 15 trim clea 5 intensive cartr rt 8 16 17 18 19 8995 sta eco normal 8 le ct 5646448_Complete_8995_Japan Seite 9 Donnerstag, 27. September 2007 8:38 08 to se eco au normal ca rtr idg e intensive full empty t to se lec clean eco au normal cart ridg e intensive 1 full empty 2 au to se t lec clean eco normal cart ridg e intensive full empty au to t se lec clean eco normal cart ridg e intensive full empty c ge full empty cartrid full ge b cartrid cartrid ge a empty empty trim fix on off sele ct clean auto eco normal rt cleaning cartridge intensive s ta full empty auto sele ct clean eco normal intensive 9 full a b c d 5646448_Complete_8995_Japan Seite 10 Donnerstag, 27. September 2007 8:38 08 8995 trim fix auto off selec t on clean eco normal start cle a nin g cartridge intensive full empty auto sele ct clean eco normal intensive auto sele ct clean eco normal intensive 10 5646448_Complete_8995_Japan Seite 11 Donnerstag, 27. September 2007 8:38 08 11 5646448_Complete_8995_Japan Seite 12 Donnerstag, 27. September 2007 8:38 08 12 8995 trim fix on fix on fix on 5646448_Complete_8995_Japan Seite 13 Donnerstag, 27. September 2007 8:38 08 13 5646448_Complete_8995_Japan Seite 14 Donnerstag, 27. September 2007 8:38 08 8995 trim fix auto off sele ct on clean eco normal cartridge intensive start cleaning full on off empty new old 14 8995 5646448_Complete_8995_Japan Seite 15 Donnerstag, 27. September 2007 8:38 08 1 2 3 4 5 6 15 5646448_Complete_8995_Japan Seite 16 Donnerstag, 27. September 2007 8:38 08 7 8 9 10 11 12 16 5646448_Complete_8995_Japan Seite 17 Donnerstag, 27. September 2007 8:38 08 17 1 2 3 4 5 6 fix on off 5646448_Complete_8995_Japan Seite 18 Donnerstag, 27. September 2007 8:38 08 18 5646448_Complete_8995_Japan Seite 19 Donnerstag, 27. September 2007 8:38 08 19 5646448_Complete_8995_Japan Seite 20 Donnerstag, 27. September 2007 8:38 08 20 5646448_Complete_8995_Japan Seite 21 Donnerstag, 27. September 2007 8:38 08 21 5646448_Complete_8995_Japan Seite 22 Donnerstag, 27. September 2007 8:38 08 22 5646448_Complete_8995_Japan Seite 23 Donnerstag, 27. September 2007 8:38 08 Your 360° Complete (shaver with Clean&Renew™ station) is a system equipped with highly advanced electronic processors. It ensures unsurpassed closeness and comfort for you and optimum care for your shaver: English • The system automatically adapts to any voltage worldwide. • The system recognizes when cleaning of your shaver is required, and automatically recognizes which of the three cleaning programs is appropriate. • While the shaver is connected to the mains, the system automatically takes care of charging and discharging in a way that is optimized for the shaver’s battery capacity and life span. • The system takes care of lubrication of the shaver’s cutting parts. • The system tells you when to replace the shaving foil and cutter block. Warning Keep the appliance dry. Your 360° Complete is provided with a special cord set with an integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock. In order to avoid any leakage of the cleaning fluid, place the Clean&Renew™ station on a flat, stable surface. Do not tip, move suddenly or transport the station in any way if a cleaning cartridge is installed. Do not place the station in a mirror cabinet, nor store it over radiators, nor place it on polished or laquered surfaces. Do not expose to direct sunlight. The station contains highly flammable liquid. Keep it away from sources of ignition. No smoking. Keep out of reach of children. Do not refill cartridge. Use only original Braun refill cartridge. 23 STOP 5646448_Complete_8995_Japan Seite 24 Donnerstag, 27. September 2007 8:38 08 Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Before shaving to se l eco au normal e intensive If you wish, you may start shaving right away (if the shaver is charged, see section «Shaver display»). However, we recommend to follow the procedure described here: full ca rtr idg Special cord set «start cleaning» button Station-to-shaver connecting contacts Station lift button for cartridge exchange Display for cleaning programs Display for cleaning fluid status Station mains socket Cleaning cartridge Shaver foil protection cap Shaver foil Cutter block Foil release buttons Long hair trimmer Shaver-to-station connecting contacts (shaver backside) Switch Shaver display Info key Pilot light Shaver mains socket empty • Using the special cord set (1), connect the mains socket of the Clean&Renew™ station (7) to an electrical outlet. • Press the station lift button (4) to open the housing. au to t se lec clean eco normal intensive cart ridg e 1 full empty • Hold the cleaning cartridge (8) down on a flat, stable surface (e.g. table). 2 • Carefully remove the lid from the cartridge. au to se t lec clean eco normal cart ridg e intensive full empty • Slide the cartridge into the base of the station as far as it will go. • Slowly close the housing by pushing it down until it locks. au to se t lec clean eco normal cart ridg e intensive full empty 24 5646448_Complete_8995_Japan Seite 25 Donnerstag, 27. September 2007 8:38 08 c cartrid ge b full full empty empty ct fix auto off sele on selec t intensive eco auto eco normal clean a b c d normal intensive rt cle a nin g cartridge s ta full empty 8995 auto sele ct clean trim fix clean eco normal auto off select on We recommend cleaning after each shave. start cle a nin g While the cleaning is in progress, the respective cleaning program light will flash. Each cleaning consists of several cycles (where the cleaning fluid is flushed through the shaver head) and a heat drying period. The total cleaning time is 33 to 50 minutes. cartridge intensive full empty Cleaning processes in the Clean&Renew™ should not be interrupted. While the shaver is drying, the metal parts of the shaver may be hot. Also, if the shaver is taken out prematurely and is not dry, its electronics could be harmed. auto sele c t clean eco normal intensive 25 empty clean If the system has selected one of the three cleaning programs, it will not start until you push down the «start cleaning» button (2). This locks the shaver into the station and starts the cleaning process. When the program is finished, the blue «clean» light will shine. You can release the shaver by pushing the «start cleaning» button. Your shaver is now clean and ready for use. full trim Make sure the foil protection cap (9) is removed from the shaver. Insert the shaver head down into the station (the contacts (14) on the back of the shaver will correspond to the contacts (3) in the station). If necessary, the system will now charge the shaver. Also, the cleaning status will be automatically analyzed and one of the four diodes of the cleaning program display (5) will light up: a) the shaver is clean b) eco(nomic), i.e. short cleaning required c) normal cleaning required d) intensive cleaning required cartrid ge a cartrid ge The display for cleaning fluid (6) will show how much cleaning fluid is in the cartridge: a) cleaning solution sufficiently available b) up to 7 cleanings left c) new cartridge required eco normal intensive 5646448_Complete_8995_Japan Seite 26 Donnerstag, 27. September 2007 8:38 08 Shaving fix on If the shaver is locked into the Clean&Renew™ station, push the «start cleaning» button (2) to release the shaver and take it out. trim fix on fix on Switch positions off = (switch is locked) Press and push up the switch to operate the shaver: on = Shaving with the pivoting head (the pivoting cutting system automatically adjusts to every contour of your face). fix = Shaving with the pivoting head locked at an angle (to permit shaving in difficult areas, e.g. under the nose). trim = The long hair trimmer is activated (for trimming sideburns, moustache and beard). 8995 Tips for the perfect shave • We recommend that you shave before washing, as the skin tends to be slightly swollen after washing. • Hold the shaver at right angles (90°) to the skin. Stretch your skin and shave against the direction of beard growth. • To maintain 100% shaving performance, replace your foil and cutter block when it is indicated on the shaver display or when the parts are worn or at least every 18 months. Shaving with the cord If the shaver is completely discharged and you do not have the time to recharge in the Clean&Renew™ station, you may also shave with the shaver connected to the mains via the special cord set. After shaving 8995 trim fix auto off select on clean eco normal cartridge intensive start cleaning full empty Automatic cleaning After each shave, return the shaver to the Clean&Renew™ station and proceed as described above in the section «Before shaving». All charging and cleaning needs are then taken care of. With daily use, a cleaning cartridge should be sufficient for about 30 cleaning cycles. The hygienic cleaning solution cartridge contains alcohol which, once opened, will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approximately 8 weeks. 26 5646448_Complete_8995_Japan Seite 27 Donnerstag, 27. September 2007 8:38 08 on off Quick cleaning Press the foil release buttons (12) to lift the shaver foil (do not remove the foil completely). Switch on the shaver for approx. 5–10 seconds so that the shaved stubbles can fall out. on off fix Thorough manual cleaning Manual cleaning is recommended only when the Clean&Renew™ station is not available, e.g. when travelling. Never use water to clean the shaver. Remove the shaver foil and tap it out on a flat surface. Using the brush, clean the inner area of the pivoting head. However, do not clean the shaver foil nor the cutter block with the brush as this may damage them. If you do not use the Clean&Renew™ station for a longer period of time, you should apply a drop of light machine oil onto the shaver foil. Cleaning the housing Clean the housing of shaver and station from time to time with a damp cloth, especially inside the opening of the station where the shaver rests. Replacing the cartridge After having pressed the lift button (4) to open the housing, wait for a few seconds before removing the used cartridge. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution. old new The shaver display 8995 1. Pilot light: the shaver is connected to the mains. 2. Shaver is charging / Remaining charging time. 3. Self testing / shaver is fully charged (a full charge will give up to 50 minutes of cordless shaving time, depending on your beard growth). 27 5646448_Complete_8995_Japan Seite 28 Donnerstag, 27. September 2007 8:38 08 4. Remaining shaving time / Shaver must be charged. 5. Time left in the cleaning process. 6. To maintain 100% shaving performance, replace your foil and cutter block, when the display shows «replace foil» (after about 18 months) or when the shaving parts are worn. Change both parts at the same time for a closer shave with less skin irritation. (Shaver foil (10) and cutter block (11): 8000 series) The display will keep on reminding you during the next 7 days to replace the shaving parts. Then the shaver will automatically reset the display. After you have replaced the shaving parts (foil and cutter block) push the info key (17) 4 times until the display shows «reset foil?». Then push the info key for at least 3 seconds to reset the display. While doing so, the display blinks. When the reset is complete the display shows «reset ok». The manual reset can be done at any time. 7. System has initiated automatic battery maintenance (it is fully discharging and then recharging the batteries). 8. Environment temperature not suited for charging. Allow the shaver to remain for some time at room temperature for optimal charging conditions. Best environmental temperature range for charging is 15 °C to 35 °C. 9. Intensive cleaning needed – return to the Clean&Renew™ station as soon as possible. To reset the display, push the info key (17). 8595 10. Display demo: hold the info key (17) for 3 seconds. 11. Info key, press once: duration of last shave. Press again: total number of shaves (cannot be reset). Press again: key part number for shaver foil and cutter block. Press again: foil reset? (can be resetted, see point 6). 12. No display – shaver is completely discharged. 28 5646448_Complete_8995_Japan Seite 29 Donnerstag, 27. September 2007 8:38 08 Accessories Available at your dealer or Braun Repair Centres: • Shaver foil and cutter block No. 8000 • Cleaning cartridge Clean&Renew™ CCR 8000 Series 360°Complete Environmental notice This appliance is provided with nickel-hydride rechargeable batteries. To protect the environment, do not dispose of the appliance in the household waste at the end of its useful life. Open the housing as shown, remove and dispose of the batteries at your retail store or at appropriate collection sites according to national or local regulations. 1 2 3 4 5 6 The cartridge can be disposed with regular garbage. Subject to change without notice. This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC. At the end of the product’s useful life, please dispose of it at appropriate collection points provided in your country. Electric specifications see printing on the special cord set. 29 5646448_Complete_8995_Japan Seite 30 Donnerstag, 27. September 2007 8:38 08 30 5646448_Complete_8995_Japan Seite 32 Donnerstag, 27. September 2007 8:38 08 5-646-448/00/IX-07
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 About : uuid:57379186-6cc6-11dc-9db1-000d93410af2 Producer : Acrobat Distiller 6.0.0 for Macintosh Create Date : 2007:09:27 08:49:32+02:00 Modify Date : 2007:10:02 15:55:03+02:00 Creator Tool : FrameMaker 5.5 PowerPC: LaserWriter 8 D2-8.7.1 Metadata Date : 2007:10:02 15:55:03+02:00 Document ID : uuid:fbb08913-6cc5-11dc-814d-000d93410af2 Instance ID : uuid:e2d0bf6f-e080-494a-9a5c-d194ce364185 Format : application/pdf Title : 5646448_Complete_8995_Japan Creator : Has XFA : No Page Count : 31 Page Layout : SinglePage Author :EXIF Metadata provided by EXIF.tools