Braun Bs 8995 Users Manual 5646448__8995_Japan
BS 8995 to the manual 5a07d154-71b6-0d34-7595-74469e8486e9
2015-02-02
: Braun Braun-Bs-8995-Users-Manual-409143 braun-bs-8995-users-manual-409143 braun pdf
Open the PDF directly: View PDF 
.
Page Count: 31
full
cartridge
empty
clean
eco
normal
intensive
auto select
a
n
i
n
g
Activator 8995 KURTZ DESIGN 21.04.05
off
trim fix on
8995
www.braun.co.jp
5646448_Complete_8995_Japan Seite 1 Donnerstag, 27. September 2007 8:38 08
2
5646448_Complete_8995_Japan Seite 2 Donnerstag, 27. September 2007 8:38 08
3
STOP
5646448_Complete_8995_Japan Seite 3 Donnerstag, 27. September 2007 8:38 08
4
5646448_Complete_8995_Japan Seite 4 Donnerstag, 27. September 2007 8:38 08
5
5646448_Complete_8995_Japan Seite 5 Donnerstag, 27. September 2007 8:38 08
6
5646448_Complete_8995_Japan Seite 6 Donnerstag, 27. September 2007 8:38 08
7
5646448_Complete_8995_Japan Seite 7 Donnerstag, 27. September 2007 8:38 08
8
start
clea
ning
clean
eco
normal
intensive
full
cartridge
auto select
empty
34
7
6
5
off
trim fix on
8995
21
9
10
13
14
15
16
17
18
19
12
12
11
8
5646448_Complete_8995_Japan Seite 8 Donnerstag, 27. September 2007 8:38 08
9
2
clean
eco
normal
intensive
full
cartridge
auto select
empty
1
clean
eco
normal
intensive
full
cartridge
auto select
empty
clean
eco
normal
intensive
full
cartridge
auto select
empty
eco
normal
intensive
auto sele
ct
full
cartridge
empty
cartridge
full
empty
cartridge
full
empty
cartridge
full
empty
abc
full
cartridge
auto select
empty
s
t
a
r
t
c
l
e
a
n
i
n
g
eco
normal
intensive
clean
trim fix on
off
auto select
eco
normal
intensive
clean
a
b
c
d
5646448_Complete_8995_Japan Seite 9 Donnerstag, 27. September 2007 8:38 08
10
full
cartridge
auto select
empty
s
t
a
r
t
c
l
e
a
n
i
n
g
eco
normal
intensive
clean
trim fix on
off
8995
auto select
eco
normal
intensive
clean
auto select
eco
normal
intensive
clean
5646448_Complete_8995_Japan Seite 10 Donnerstag, 27. September 2007 8:38 08
11
5646448_Complete_8995_Japan Seite 11 Donnerstag, 27. September 2007 8:38 08
12
5646448_Complete_8995_Japan Seite 12 Donnerstag, 27. September 2007 8:38 08
13
fix on
fix on
trim fix on
8995
5646448_Complete_8995_Japan Seite 13 Donnerstag, 27. September 2007 8:38 08
14
full
cartridge
auto select
empty
s
t
a
r
t
c
l
e
a
n
i
n
g
eco
normal
intensive
clean
trim fix on
off
8995
on off
new old
5646448_Complete_8995_Japan Seite 14 Donnerstag, 27. September 2007 8:38 08
15
8995
1
2
3
4
5
6
5646448_Complete_8995_Japan Seite 15 Donnerstag, 27. September 2007 8:38 08
16
7
8
9
10
11
12
5646448_Complete_8995_Japan Seite 16 Donnerstag, 27. September 2007 8:38 08
17
12
4
5 6
3
5646448_Complete_8995_Japan Seite 17 Donnerstag, 27. September 2007 8:38 08
18
fix on off
5646448_Complete_8995_Japan Seite 18 Donnerstag, 27. September 2007 8:38 08
19
5646448_Complete_8995_Japan Seite 19 Donnerstag, 27. September 2007 8:38 08
20
5646448_Complete_8995_Japan Seite 20 Donnerstag, 27. September 2007 8:38 08
21
5646448_Complete_8995_Japan Seite 21 Donnerstag, 27. September 2007 8:38 08
22
5646448_Complete_8995_Japan Seite 22 Donnerstag, 27. September 2007 8:38 08
23
Your 360° Complete (shaver with Clean&Renew™ station)
is a system equipped with highly advanced electronic
processors. It ensures unsurpassed closeness and
comfort for you and optimum care for your shaver:
• The system automatically adapts to any voltage
worldwide.
• The system recognizes when cleaning of your shaver is
required, and automatically recognizes which of the
three cleaning programs is appropriate.
• While the shaver is connected to the mains, the system
automatically takes care of charging and discharging in
a way that is optimized for the shaver’s battery capacity
and life span.
• The system takes care of lubrication of the shaver’s
cutting parts.
• The system tells you when to replace the shaving foil
and cutter block.
Warning
Keep the appliance dry.
Your 360° Complete is provided with a special cord set
with an integrated Safety Extra Low Voltage power
supply. Do not exchange or manipulate any part of it.
Otherwise there is risk of electric shock.
In order to avoid any leakage of the cleaning fluid,
place the Clean&Renew™ station on a flat, stable
surface.
Do not tip, move suddenly or transport the station in
any way if a cleaning cartridge is installed.
Do not place the station in a mirror cabinet, nor store
it over radiators, nor place it on polished or laquered
surfaces. Do not expose to direct sunlight.
The station contains highly flammable liquid. Keep it
away from sources of ignition.
No smoking.
Keep out of reach of children.
Do not refill cartridge.
Use only original Braun refill cartridge.
STOP
English
5646448_Complete_8995_Japan Seite 23 Donnerstag, 27. September 2007 8:38 08
24
Description
1 Special cord set
2 «start cleaning» button
3 Station-to-shaver connecting contacts
4 Station lift button for cartridge exchange
5 Display for cleaning programs
6 Display for cleaning fluid status
7 Station mains socket
8 Cleaning cartridge
9 Shaver foil protection cap
10 Shaver foil
11 Cutter block
12 Foil release buttons
13 Long hair trimmer
14 Shaver-to-station connecting contacts
(shaver backside)
15 Switch
16 Shaver display
17 Info key
18 Pilot light
19 Shaver mains socket
Before shaving
If you wish, you may start shaving right away (if the shaver
is charged, see section «Shaver display»). However, we
recommend to follow the procedure described here:
• Using the special cord set (1), connect the mains socket
of the Clean&Renew™ station (7) to an electrical outlet.
• Press the station lift button (4) to open the housing.
• Hold the cleaning cartridge (8) down on a flat, stable
surface (e.g. table).
• Carefully remove the lid from the cartridge.
• Slide the cartridge into the base of the station as far as
it will go.
• Slowly close the housing by pushing it down until it
locks.
eco
normal
intensive
auto s
el
full
cartridge
empty
2
clean
eco
normal
intensive
full
cartridge
auto select
empty
1
clean
eco
normal
intensive
full
cartridge
auto select
empty
clean
eco
normal
intensive
full
cartridge
auto select
empty
5646448_Complete_8995_Japan Seite 24 Donnerstag, 27. September 2007 8:38 08
25
The display for cleaning fluid (6) will show how much
cleaning fluid is in the cartridge:
a) cleaning solution sufficiently available
b) up to 7 cleanings left
c) new cartridge required
Make sure the foil protection cap (9) is removed from the
shaver. Insert the shaver head down into the station (the
contacts (14) on the back of the shaver will correspond to
the contacts (3) in the station). If necessary, the system
will now charge the shaver.
Also, the cleaning status will be automatically analyzed
and one of the four diodes of the cleaning program display
(5) will light up:
a) the shaver is clean
b) eco(nomic), i.e. short cleaning required
c) normal cleaning required
d) intensive cleaning required
If the system has selected one of the three cleaning
programs, it will not start until you push down the «start
cleaning» button (2). This locks the shaver into the station
and starts the cleaning process.
We recommend cleaning after each shave.
While the cleaning is in progress, the respective cleaning
program light will flash. Each cleaning consists of several
cycles (where the cleaning fluid is flushed through the
shaver head) and a heat drying period. The total cleaning
time is 33 to 50 minutes.
Cleaning processes in the Clean&Renew™ should not
be interrupted. While the shaver is drying, the metal
parts of the shaver may be hot. Also, if the shaver is
taken out prematurely and is not dry, its electronics
could be harmed.
When the program is finished, the blue «clean» light will
shine. You can release the shaver by pushing the «start
cleaning» button.
Your shaver is now clean and ready for use.
cartridge
full
empty
cartridge
full
empty
cartridge
full
empty
abc
full
cartridge
auto select
empty
s
t
a
r
t
c
l
e
a
n
i
n
g
eco
normal
intensive
clean
trim fix on
off
auto select
eco
normal
intensive
clean
a
b
c
d
auto select
eco
normal
intensive
clean
full
cartridge
auto select
empty
s
t
a
r
t
c
l
e
a
n
i
n
g
eco
normal
intensive
clean
trim fix on
off
8995
auto select
eco
normal
intensive
clean
5646448_Complete_8995_Japan Seite 25 Donnerstag, 27. September 2007 8:38 08
26
Shaving
If the shaver is locked into the Clean&Renew™ station,
push the «start cleaning» button (2) to release the shaver
and take it out.
Switch positions
off = (switch is locked)
Press and push up the switch to operate the shaver:
on = Shaving with the pivoting head
(the pivoting cutting system automatically adjusts
to every contour of your face).
fix = Shaving with the pivoting head locked at an angle
(to permit shaving in difficult areas, e.g. under the
nose).
trim = The long hair trimmer is activated
(for trimming sideburns, moustache and beard).
Shaving with the cord
If the shaver is completely discharged and you do not
have the time to recharge in the Clean&Renew™ station,
you may also shave with the shaver connected to the
mains via the special cord set.
After shaving
Automatic cleaning
After each shave, return the shaver to the Clean&Renew™
station and proceed as described above in the section
«Before shaving». All charging and cleaning needs are
then taken care of. With daily use, a cleaning cartridge
should be sufficient for about 30 cleaning cycles.
The hygienic cleaning solution cartridge contains alcohol
which, once opened, will naturally evaporate slowly into
the surrounding air. Each cartridge, if not used daily,
should be replaced after approximately 8 weeks.
Tips for the perfect shave
• We recommend that you shave before washing, as
the skin tends to be slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin.
Stretch your skin and shave against the direction of
beard growth.
• To maintain 100% shaving performance, replace
your foil and cutter block when it is indicated on the
shaver display or when the parts are worn or at least
every 18 months.
fix on
fix on
trim fix on
8995
full
cartridge
auto select
empty
s
t
a
r
t
c
l
e
a
n
i
n
g
eco
normal
intensive
clean
trim fix on
off
8995
5646448_Complete_8995_Japan Seite 26 Donnerstag, 27. September 2007 8:38 08
27
Quick cleaning
Press the foil release buttons (12) to lift the shaver foil
(do not remove the foil completely). Switch on the shaver
for approx. 5–10 seconds so that the shaved stubbles can
fall out.
Thorough manual cleaning
Manual cleaning is recommended only when the
Clean&Renew™ station is not available, e.g. when travel-
ling.
Never use water to clean the shaver.
Remove the shaver foil and tap it out on a flat surface.
Using the brush, clean the inner area of the pivoting head.
However, do not clean the shaver foil nor the cutter block
with the brush as this may damage them.
If you do not use the Clean&Renew™ station for a longer
period of time, you should apply a drop of light machine
oil onto the shaver foil.
Cleaning the housing
Clean the housing of shaver and station from time to time
with a damp cloth, especially inside the opening of the
station where the shaver rests.
Replacing the cartridge
After having pressed the lift button (4) to open the
housing, wait for a few seconds before removing the used
cartridge.
Before discarding the used cartridge, make sure to close
the openings using the lid of the new cartridge, since the
used cartridge will contain contaminated cleaning
solution.
The shaver display
1. Pilot light: the shaver is connected to the mains.
2. Shaver is charging / Remaining charging time.
3. Self testing / shaver is fully charged (a full charge
will give up to 50 minutes of cordless shaving time,
depending on your beard growth).
fix on off
on off
old
new
8995
5646448_Complete_8995_Japan Seite 27 Donnerstag, 27. September 2007 8:38 08
28
4. Remaining shaving time / Shaver must be charged.
5. Time left in the cleaning process.
6. To maintain 100% shaving performance, replace your
foil and cutter block, when the display shows
«replace foil» (after about 18 months) or when the
shaving parts are worn. Change both parts at the
same time for a closer shave with less skin irritation.
(Shaver foil (10) and cutter block (11): 8000 series)
The display will keep on reminding you during the
next 7 days to replace the shaving parts. Then the
shaver will automatically reset the display.
After you have replaced the shaving parts (foil and
cutter block) push the info key (17) 4 times until the
display shows «reset foil?». Then push the info key for
at least 3 seconds to reset the display.
While doing so, the display blinks. When the reset is
complete the display shows «reset ok». The manual
reset can be done at any time.
7. System has initiated automatic battery maintenance
(it is fully discharging and then recharging the
batteries).
8. Environment temperature not suited for charging.
Allow the shaver to remain for some time at room
temperature for optimal charging conditions.
Best environmental temperature range for charging
is 15 °C to 35 °C.
9. Intensive cleaning needed – return to the
Clean&Renew™ station as soon as possible.
To reset the display, push the info key (17).
10. Display demo: hold the info key (17) for 3 seconds.
11. Info key, press once: duration of last shave.
Press again: total number of shaves (cannot be reset).
Press again: key part number for shaver foil and
cutter block. Press again: foil reset? (can be resetted,
see point 6).
12. No display – shaver is completely discharged.
8595
5646448_Complete_8995_Japan Seite 28 Donnerstag, 27. September 2007 8:38 08
29
Accessories
Available at your dealer or Braun Repair Centres:
•
Shaver foil and cutter block
No. 8000
•
Cleaning cartridge Clean&Renew™
CCR
Environmental notice
This appliance is provided with nickel-hydride recharge-
able batteries. To protect the environment, do not dispose
of the appliance in the household waste at the end of
its useful life. Open the housing as shown, remove and
dispose of the batteries at your retail store or at appro-
priate collection sites according to national or local
regulations.
The cartridge can be disposed with regular garbage.
Subject to change without notice.
This product conforms to the European Directives
EMC 2004/108/EC and Low Voltage 2006/95/EC.
At the end of the product’s useful life, please
dispose of it at appropriate collection points
provided in your country.
Electric specifications see printing on the special cord set.
8000
Series
360°Complete
12
4
5 6
3
5646448_Complete_8995_Japan Seite 29 Donnerstag, 27. September 2007 8:38 08
30
5646448_Complete_8995_Japan Seite 30 Donnerstag, 27. September 2007 8:38 08
5-646-448/00/IX-07
5646448_Complete_8995_Japan Seite 32 Donnerstag, 27. September 2007 8:38 08
