Breo Technology IDREAM3 HEAD MASSAGER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1848087
Application ID	B9oz/WpNFqdfZ+H8gI2Zvw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.1kB (263741 bits)
Date Submitted	2012-11-29 00:00:00
Date Available	2012-11-29 00:00:00
Creation Date	2012-09-25 17:44:47
Producing Software	Adobe PDF library 9.90
Document Lastmod	2012-09-25 17:44:47
Document Title	id3美国版折叠说明书9.25 小格式
Document Creator	Adobe Illustrator CS5

439
Main Unit and Remote Control
User Manual
Operation
Operation
Function Deployment
Automatic Mode (without the remote control)
Charging of Main Unit
11.
1.
10.
4.
3.
No need of remote control. The main unit starts working after 8 seconds.
2. Insert the plug of the power charger to the DC port.
Preset default is air pressure + heat compression + music + 15 minutes
3. During charging, the light of the power charger is red. The light turns green
duration.
when fully charged.
Manual Mode (using the remote control）
Attention:
2. If the massager is turned on while recharging, all functions of the product
1. Power ON: Push the ON/OFF switch on the main unit to Level “I” (Picture2)
will run normally. The machine will automatically stop charging to
The main unit is powered by a high performance, environment-friendly lithium
prevent damage to the device.
battery.
Power interface
Port
5. DC power
Take off contact lenses/eye glasses before use.
automatically turn off. If the LED indicator of the main unit flashes, it
Put on/wear the unit first BEFORE turning the power on.
means the lithium battery is low. Recharge the main unit.
duration
6.
Do not use while walking or driving.
Default air pressure: Mode 5 – circulates among Modes 1 to 4;
7.
Keep your eyes closed for a few seconds after use, then open them slowly.
Default hot compress: low temperature;
8.
Keep the massager away from humidity, heat, and/or corrosive gas.
Default Music: Well-being music
9.
If the massager will not be used for a long time, remove the batteries to
11. Tightness Adjusting Knob
2. Press and hold
Button on the remote control
iDream3 adopts air pressure, vibration, and hot compress massaging
technology to massage the head and ocular regions. It comes with a wireless
remote control and built-in MP3 player. You can now enjoy wonderful music
while massaging, further relaxing your head and eyes.
Power switch protection key: Push left or right to turn ON/OFF
MUST push power switch to Level “O” after each use
Time
— Press
Button to select “Time”
Music Downloading
— Press
Button to select massage duration
1. Connect the main unit to computer using the supplied USB cable;
Air pressure
2. Push the power protection key on the main unit to Level “I”;
— Press
Button to select “ Air Pressure”
interference, and (2) this device must accept any interference received,
3. Copy MP3 music to the device.
— Press
Button to select from the 5 different modes of air pressure
including interference that may cause undesired operation.
the encoding is successful (This step should be completed within 6
seconds). If unsuccessful, repeat from the start.
1 Set of Earphones, 1 USB Cable
3. Push the power switch of the main unit to level “O”, then back to
level “I”. Both the main unit and remote control should now be
most comfortable fit, and wear main unit.
2. Use the top dial in setting the distance above head.
Power on
the main unit is prohibited.
pairing of remote control and main unit is strictly prohibited.
healthcare professional.
14. It is very IMPORTANT to turn the power of the main unit OFF after
each use and before storage to avoid damage to the machine.
15.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
16.
1. Open the battery cover on the back of the remote control.
2. Place 3 AAA batteries in accordance with the positive and negative
poles.
Heat compression
17.
Button to select “Heat Compression”
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
— Press
Button to select low temperature or high temperature
are designed to provide reasonable protection against harmful interference
— Off/On: Press
Button to turn off/on Heat Compression
the instructions, may cause harmful interference to radio ommunications.
— Press
Button to select “Vibration”,then Press
Button
— Press
Button to select from the 5 different modes of vibration
will not occur in a particular installation. If this equipment does cause harmful
—Off/On: Press
Button to turn off/on Vibration
interference to radio or television reception,which can be determined by
Power: 4.5W
Temperature 5℃～40℃ Relative Humidity ≤80%
Atmospheric Pressure: 860hpa～1060hpa
Main Unit：L282mm X W206mm X H254mm
Controller ：L132mm X W44mm X H24mm
Net Weight：
1125g
Button to select “Music”,then Press
Button
Button to go to the next one
— Press
1. No damage on power charger
(picture 2)
2. Battery power is sufficient
to Level “I”
(picture 1)
Button to go to the previous one
— Press and hold
Button: Volume up
— Press and hold
Button: Volume down
— Off/On: Press
Button to turn off/on Music
— Press and hold
Button to switch over between built-in music and MP3
music
Storage
However, there is no guarantee that interference will not occur in a
the interference by one or more of the following measures:
(Preset Default – circulates among pre-recorded music)
Batteries
DC: 4.5V
in a residential installation. This equipment generates, uses and can radiate
Vibration
— Press
Prior to use, check the integrity of the machine and accessories:
Manual
Dimension：
This equipment has been tested and found to comply with the limits for a
— Press
— Press
Controller
USB Cable
Ideal
Environment：
party responsible for compliance could void the user’s authority to operate
Button to turn off/on Air Pressure
Music
Preparation
Earphones
DC/Power：
Please note that changes or modifications not expressly approved by the
turning the equipment off and on,the user is encouraged to ry to correct
Power Charger
Specifications
radio frequency energy and, if not installed and used in accordance with
3. Close the battery cover. (Picture1)
Main Unit
Check if positive/negative poles of
batteries are positioned right
Make sure the batteries are snug in
place
Weak air pressure Lithium battery of the main unit Recharge the main unit at once
or vibration
is low
the equipment.
controller. The operation of encoding joint with multiply remote controller to
Important: Make sure that only one device is paired with the remote control. Multiple
Remote control batteries are not
installed correctly
package, and handle it with care.
— Off/On: Press
1. Use the back dial to adjust the distance between head to establish the
Change batteries
13. Please use ONLY the DC4.5V power charger that comes with the
(Preset Default: Mode 5 – circulates among Modes 1 to 4)
working.
Please make sure that one main unit is corresponding to one remote
Button to select air pressure mode, vibration mode, hot
15 minutes/10 minutes/5 minutes
Wear
Remote control batteries are
low/ out
Power-On Failure
and treatment. In case of doubt or if necessary, please consult your
control, you can perform joint encoding operation:
lights up while the main unit’s blue LED indicator turns off-it means
Recharge the main unit at once
12. This product is not a substitute for healthcare professionals' advice
1. Turn the remote control off, and push the power switch of the main
and
Lithium battery of the main
unit is low
To clean, wipe with aseptic cotton and alcohol. Do not wash or
compress temperature, change music and/or massage duration
The blue LED indicator on the front of the main unit flashes.
Push this key to Level “I”
caution.
11.
In case of problem with connection between the main unit and remote
it, push the power switch of the main unit to level “I” to turn it on;
Power Switch Protection key
is not turned on
of or do not ordinarily feel heat/cold sensation should use this device with
— Press
Press and hold [8] encoding key of the main unit. While still holding
Possible Solution
This massager features heat compression. Individuals who are incapable
Attention:
unit to level “O”;
Possible Reason
immerse in water.
Press
Button to choose among functions
(Time, Air Pressure, Vibration, Heat, and Music)
— Press Button to turn on/off a function
keys of the remote control for 2-3 seconds. The remote control LCD
1 Main Unit, 1 Controller, 1 Power Charger, 3 Batteries, 1 User Manual,
10.
hot compress temperature, change music and/or massage duration.
Center: OK Button
2. Release [8] encoding key, and simultaneously press the
Inside the package
avoid battery leakage.
Manually operate related buttons to select air pressure mode, vibration mode,
/Function Mode Previous
Introduction
Button on the remote control.
4. Push the ON/OFF switch on the main unit to Level “O”
Operating Button:Clockwise: Up Button/Function Mode Next/Down Button
Problem
eye diseases
5.
LCD Screen：From top to bottom: Time /Air Pressure/Vibration/Hot Compress/Music
Thank you for purchasing Breo iDream3.
Please read this manual carefully before using the product,
and keep it in a safe place for future reference.
This massager should not be used by:
c. People who have physical or mental disorder
3. Power OFF: Press
For relief of minor aches and pains
Children under 7 years old cannot use the massager.
3.
4.
6. Earphone Jack
EYE & HEAD MASSAGER
Please read the manual carefully and operate accordingly.
2.
Preset default is air pressure + heat compression + music + 15 minutes
3. If the power of the battery is lower than 3.2 +0.1V, the machine will
Air discharge
Reduction Valve 10. Size Adjusting Knob
4. Pressure
1.
b. People who are suffering from glaucoma, retinoschisis or other serious
5.
9. USB Port
Do not disassemble the machine or try to repair it by yourself.
a. People who suffer from brain disease or have undergone brain surgery
6.
3. Operating Buttons
When operational problems occur, please refer to the chart below.
Power On/Off
turned OFF while charging. Charging time is approximately 3-4 hours.
8. Encoding Key
Precautions
Push the ON/OFF switch on the main unit to Level “O”.
9.
7. Power Switch Protection key
Troubleshooting
2. Power OFF – The main unit automatically shuts off after 15 minutes.
8.
1. LCD Screen
Pressure Reduction Valve on the main unit to release air.
1. Power ON – Push the ON/OFF switch on the main unit to Level “I” (Picture2)
1. Open the cover of the DC power port on the main unit.
1. Push the power switch on the main unit to Level “O”. Keep the massager
2. ON/Off
When you feel the air pressure is too much and/or uncomfortable, press the
Power On/Off
2.
7.
Attention:
–Reorient or relocate the receiving antenna.
1.
2.
3.
If left unused, checking the product/turning the power on every 6 months is
recommended.
Do not store near the floor, wall or roof.
Maintain good ventilation and keep away from direct sunlight and corrosive
gases.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Made in China
Manufactured by: Shenzhen Breo Technology, Co., Ltd.
Company Address: Jinshan Bldg., No. 5033, Shennan East Road, Shenzhen,
518008, China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : id3美国版折叠说明书9.25 小格式
Creator Tool                    : Adobe Illustrator CS5
Create Date                     : 2012:09:25 17:44:47+08:00
Modify Date                     : 2012:09:25 17:44:47+08:00
Metadata Date                   : 2012:09:25 17:44:47+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17714 bytes, use -b option to extract)
Document ID                     : xmp.did:5B0376A1F506E211B341EBAB73B65BB0
Instance ID                     : uuid:f757bf1a-e9e1-4c77-9761-9ae1003ae3d1
Rendition Class                 : proof:pdf
Original Document ID            : uuid:ACFB98B5D658E01199F39625C6EC9B29
Derived From Instance ID        : uuid:959076f2-ff4f-471e-8479-30ed8a782600
Derived From Document ID        : xmp.did:ADEBF467AFFCE111830BE2C02A5E6681
Derived From Original Document ID: uuid:ACFB98B5D658E01199F39625C6EC9B29
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:376FEF11A365E011B216943C7E980705, xmp.iid:6BF98B2BCC90E011947ADCB71B087AD8, xmp.iid:53A75F1BFD97E0118B0E85280CA9F7E4, xmp.iid:54A75F1BFD97E0118B0E85280CA9F7E4, xmp.iid:01CD5261C6CFE011B728CD39420B1C65, xmp.iid:7D9CFE4DE414E11183B5D7CD975BC10F, xmp.iid:7E9CFE4DE414E11183B5D7CD975BC10F, xmp.iid:849CFE4DE414E11183B5D7CD975BC10F, xmp.iid:859CFE4DE414E11183B5D7CD975BC10F, xmp.iid:42C3CC881B1BE11182DCF96DB8D697BE, xmp.iid:43C3CC881B1BE11182DCF96DB8D697BE, xmp.iid:2ADF42A2CE3DE111BFD5BF96DAD3FA57, xmp.iid:2BDF42A2CE3DE111BFD5BF96DAD3FA57, xmp.iid:2CDF42A2CE3DE111BFD5BF96DAD3FA57, xmp.iid:2DDF42A2CE3DE111BFD5BF96DAD3FA57, xmp.iid:E0228301F868E111887E946D8331D2B5, xmp.iid:E1228301F868E111887E946D8331D2B5, xmp.iid:E2228301F868E111887E946D8331D2B5, xmp.iid:A67197F31569E111887E946D8331D2B5, xmp.iid:A77197F31569E111887E946D8331D2B5, xmp.iid:4C96AAA5FC6FE11187C8DA593C61A11C, xmp.iid:AF843027F272E111ADBCE9E55061B158, xmp.iid:B1843027F272E111ADBCE9E55061B158, xmp.iid:B2843027F272E111ADBCE9E55061B158, xmp.iid:B3843027F272E111ADBCE9E55061B158, xmp.iid:B5843027F272E111ADBCE9E55061B158, xmp.iid:2125628BB773E1119564D91991E3EEB8, xmp.iid:2225628BB773E1119564D91991E3EEB8, xmp.iid:ADEBF467AFFCE111830BE2C02A5E6681, xmp.iid:5B0376A1F506E211B341EBAB73B65BB0
History When                    : 2011:04:13 15:53:07+08:00, 2011:06:07 15:28:04+08:00, 2011:06:16 18:05:36+08:00, 2011:06:16 18:06:17+08:00, 2011:08:26 17:32:56+08:00, 2011:11:22 16:30:59+08:00, 2011:11:22 16:31:33+08:00, 2011:11:22 17:00:24+08:00, 2011:11:22 17:15:05+08:00, 2011:11:30 15:52:12+08:00, 2011:11:30 15:52:25+08:00, 2012:01:13 18:34:56+08:00, 2012:01:13 18:35:39+08:00, 2012:01:13 18:36:09+08:00, 2012:01:13 18:38:52+08:00, 2012:03:08 17:31:43+08:00, 2012:03:08 19:53:22+08:00, 2012:03:08 19:57:06+08:00, 2012:03:08 19:57:59+08:00, 2012:03:08 19:58:28+08:00, 2012:03:17 14:44:29+08:00, 2012:03:21 09:06:56+08:00, 2012:03:21 13:35:23+08:00, 2012:03:21 13:35:39+08:00, 2012:03:21 15:49:11+08:00, 2012:03:21 16:24:08+08:00, 2012:03:22 08:39:55+08:00, 2012:03:22 08:47:46+08:00, 2012:09:12 16:42:22+08:00, 2012:09:25 17:44:42+08:00
History Software Agent          : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : E:\JIM\包装\iDream3 外销备用\iDream3外备 正面副本.jpg
Startup Profile                 : Basic CMYK
Producer                        : Adobe PDF library 9.90
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 48.200228
Max Page Size H                 : 32.876615
Max Page Size Unit              : Centimeters
Font Name                       : UniversLTStd-BoldObl, UniversLTStd-BoldCn, UniversLTStd-Cn, UniversLTStd-LightCn, AdobeSongStd-Light, SimSun, DFPHeiW3
Font Family                     : Univers LT Std, Univers LT Std, Univers LT Std, Univers LT Std, Adobe 宋体 Std, 宋体, 华康黑体W3(P)
Font Face                       : 65 Bold Oblique, 67 Bold Condensed, 57 Condensed, 47 Light Condensed, L, Regular, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType
Font Version                    : OTF 1.029;PS 001.004;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.003;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 3.12, Version 1.00
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : UniversLTStd-BoldObl.otf, UniversLTStd-BoldCn.otf, UniversLTStd-Cn.otf, UniversLTStd-LightCn.otf, AdobeSongStd-Light.otf, simsun.ttc, DFPGB_H3.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black, New Colour Swatch
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Cyan    : 100.000000
Swatch Groups Colorants Magenta : 100.000000
Swatch Groups Colorants Yellow  : 100.000000
Swatch Groups Colorants Black   : 100.000000
Swatch Groups Colorants Gray    : 12
Swatch Groups Colorants Swatch Name: New Colour Swatch
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Red     : 255
Swatch Groups Colorants Green   : 255
Swatch Groups Colorants Blue    : 255
Page Count                      : 1
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools