Brightstar GP855 GSM Fixed Wireless Phone User Manual
Brightstar Corporation GSM Fixed Wireless Phone
UserManual.wiki
>
Brightstar
>
GP855 User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![[ 1 ] installing Coil CordConnect the coil cord to both the handset and the transceiver ( phone ).[ 2 ] Installing AntennaInstall the antenna to the antenna connector. Hold the plastic portion of the antenna and turn the metal screw clock-wise.[ 3 ] Plugging AC/DC AdapterConnect the adaptor to the AC Wall outlet.[ 4 ] SIM Card and battery1) Remove the battery door.2) Insert SIM card into the SIM slot in the right direction 3) Connect the rechargeable battery pack into the battery plug 4) Replace the battery door.[5 ] Turning Phone’s Power On/OffAfter installing the handset correctly, press the power key which is on the right of the front panel for about 3 seconds, the phone will then automatically test whether the SIM Card is inserted and valid. Wait for the antenna icon to display indicator bars before you make a call. 1) When the battery icon is empty, connect the external power adapter’s barrelconnector to the external power input on back panel of unit.2) Plug the external power adapter into the power socket. The unit will powerup automatically.3) Check the cellular signal strength and move the unit until the best signal possible is achieved.4) In state of power-on, press and hold power key button, LCD screen closes.ABOUT YOUR PHONES ABOUT YOUR PHONESINSTALLATIONNote :The battery pack is a backup for emergencies in case of a power failure.Do not operate the phone without having the AC/DC adaptor connected.Be sure to carefully match the positive and negative terminals as shown on the battery. When using the phone for the first time, charge it for over 6 hours to ensure optimum battery charge.Caution :It is prohibited to use the SIM card for this Fixed Wireless Phone in otherGSM phone. Once the SIM pin number has entered, the SIM pin maybe automatically changed so the initial PIN is no longer valid. Therefore, it ishighly recommendedNOT to take out the SIM card once it has installed in this product.DO NOT bend or scratch your SIM card, and avoid exposing it to staticelectricity, water, or dirt. 1211 1243](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-6.png)
![[ 1 ] Left / Right Soft Key ( Menu / Contacts key )Press the left soft key ( Menu ) to perform the function indicated by the text on the screen above the key.Press the right key ( Contacts ) to directly access the Contacts list.[ 2 ] Send keyPress to make a call to a name / number shown on the screen.Press to answer a call.Press and hold for 1 second to access the list of recently dialednumbers.[ 3 ] End keyPress to end a call.Press once to exit a function and return to the idle screen.[ 4 ] Numeric Keys / ‘*’ keys/ ‘#’ KeysUsed for entering numbers and letters.Press and hold to call the voice mailbox.Press to toggle between upper case, lower case and numeric modes.Press to toggle between letters and symbols.[ 5 ] Navigation / Scroll keysPress left / right navigation key to increase or decrease ring volume.Press up navigation key to select dial records.Press down navigation key to Calculator function.Press this key to press up / down the phone’s menu.Press to move the cursor when entering letters.[ 6 ] SMS KeyPress to enter ‘write new message’ function in idle mode[ 7 ] Speaker keyIf you are using the handset to call and you want to transfer the call to the speakerphone mode, press the Speaker key button and hang up thereceiver to transfer the call to the speakerphone.ABOUT YOUR PHONES ABOUT YOUR PHONESKEY FUNCTIONNote :The functions of the soft keys depend on the guiding text shownabove the keys. For example, when the text Menu is above the left soft key, press , and the left key enters the menu functions. Similarly, press the right soft key under the text Contacts accesses the Contact list functions.13 14](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-7.png)
![[ 1 ] Switching the phone ON and OFF1) To turn on your phone, press and hold “End key” for a few seconds or until the display turns on. 2) To turn off your phone, press and hold “End key” for a few seconds[ 2 ] Making a call1) Dial a CallRaise your receiver and enter phone number which you want to callAfter entering phone number and press “Call key” to make a call.2) Dial the Fixed Phone Extension NumberSome fixed phone extension can’t be called directly, it need a phone exchange. If you input the pause character ‘P’ between the exchange phonenumber and extension number, the phone will finish the dial procedure, connect to the extension. To get the “P”, press the “＊” key for a while till the “P” displayed on the phone screen. 3) Dial a International Call Press the “＊”key till the char “+” displayed on the phone screen.Input the country code and the phone number after the prefix. 4) Dial From ContactsPress the right soft key to get into the phone book. Press Up / Dow navigation key to scroll the list to search the caller’s name. Then press call key to make a call.5) Speed DialPress 2-9 keys for a while, the phone number stored in speed dial list will besent out. Make sure the speed dial key has been set up.[ 3 ] Answering a callWhen your phone rings, just raise your receiver to answer, or press “Call key”or “Speaker key” to answer in speaker phone mode.[ 4 ] Speaker mode.You can make or answer a phone call by pressing Speaker key when thehandset is on the base.To make a call:1) Press Speaker key to turn ON the speaker phone mode.2) If you hear the dial tone, press the number you want to connect to.3) Press Send keyTo answer a callWhen the phone rings, press Speaker key to turn ON the speaker phonemode.[ 5 ] Adjusting the Ring VolumeYou can adjust the ring tone volume by pressing the scroll keys on the phone.1) Press left / right navigation key up to enter the ring volumecontrol screen.2) Press right navigation key to increase the volume.3) Press left navigation key to decrease the volume.[ 6 ] Redialing the last-dialed numberThe phone stores up to 10 last dialed numbers. 1) Press Send key for a second to find the most recently dialed numbers.2) Press navigation key to scroll to the number you wish to dial.3) Press Send key once.BASIC FUNCTION BASIC FUNCTIONBASIC OPERATIONTip: In some menus like Contacts, Dial Records, etc. which haveindividual phone number, Press “Call key” directly to make a call.Note: The call is automatically made without pressing, approximately3 seconds after you dial the number.Note : If no recently dialed numbers are stored, you will not be ableto use this function.17 18](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-9.png)
![[ 7 ] Caller IDRequires a subscription to a calling plan that supports this feature. Not availablein all areas. Contact you telephone service provider for availability and details.When Caller ID is active, your phone shows the caller’s phone number duringan incoming call, as long as this number is a part of your service provider’s wireless network.The wireless network lets you know if it does not recognize the caller’s phone number.The wireless network will also let you know if the calling party has blocked theCaller ID feature.If you have stored the name and number of the calling party in your Contactsand that number is supported by the wireless network, the caller’s name will also appear.[ 8 ] SMS and Voice Mail Requires a subscription to a calling plan that supports this feature. Not availablein all areas. Contact you telephone service provider for availability and details.A new SMS arrives:The back light of the LCD is ON and the display shows “New Message, Read Now ?” text message with SMS icon . And if you want to read received newMessage, press the left soft key ( Yes ). If you want to check message later,press the right soft key ( No ).Voice mail arrives :The back light of the LCD is ON and the display shows “New Voice Message, Listen Now ?” text message with Voicemail icon . And if you want to checknew voice message, press the left soft key ( Yes ). If you want to check message later, press the right soft key ( No ). [ 1 ] MenusA menu is a list of choices you can make. Your phone has 5 menus. ( And your service provider may add STK menu extra depending on network service )Each menu contains options that allow you to use the message, change thering tone, etc.You can use menus and sub-menus in two ways: by scrolling or by using shortcuts.[ 2 ] Scrolling through menus1) From the Start screen, press Menu, and then scroll through the menus usingup / down navigation key.2) Use the scroll and OK key to select the submenus and back key to return tothe Start screen.[ 3 ] Exiting menu levels1) To return to the previous menu level, press Back key or Cancel key.2) To return to the Start screen, press End key. No menu setting changeswill be saved.[ 4 ] Menu TreeYou can refer to 23 pages about Menu tree for more details.[ 5 ] Using shortcuts through menus1) Contacts : press the right soft key directly2) Dial Records : press up navigation key directly.3) Calculator : press down navigation key directly.4) Write New ( Message ) : press SMS key directly.5) Outgoing call : press Call key one time for a second.BASIC FUNCTION BASIC FUNCTIONUSING PHONE MENUS19 20](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-10.png)
![You can enter letters, as well as numbers, when storing information in your phone by using your phone’s keypad. To enter letters, press the key associatedwith the letter you wish to enter until it appears on the screen (numbers will also appear).[ 1 ] Entering LettersWhen you want to add new names or when you view names in the Contacts, your phone automatically switches to the abc ( ABC ) mode and displays theabc icon on the right upper side in Display .Key Characters Key Characters* : abc ÎAbc ÎABC Î123 rotated[ 2 ] Editing name or phone numberTo edit a name already stored in the Contacts:1) From the main screen, use the right soft key.2) From the Contacts list ( Read ), select the name you want to edit by scrollingup / down navigation key and press OK key.3) To edit, press the left soft key and scroll down to the edit option and pressOK key .4) Edit the name you want to change and / or press again OK key to change the phone number .5) Press up or left navigation key to scroll the cursor to the left.6) Press down or right navigation key to scroll the cursor to the right.7) Press Clear to correct any mistakes.8) Press the left soft key OK to save changes or the right soft key to cancel.[ 3 ] Changing the case of letters and numbersYou can switch the mode among uppercase and lowercase letters and numbersby pressing # key.BASIC FUNCTION BASIC FUNCTIONENTER LETTERS AND NUMBERSChange letter case( * )#, . ‘ ? ! “ @ ￥$ _ ‘ ˆ { } [ ∼] | # ¤ % & ( ) * + - / : ; < = > ¡ §¿*(Space) 00w x y z 99t u v 8 ù ü8p q r s 7 β$7m n o 6 ö ø ò ñ6j k l 5 £5g h i 4 ì4d e f 3 è é3a b c 2 å æ ä à ç2, . ? ! 11CharactersKeyCharactersKey21 22](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-11.png)
![New entries can be stored in the SIM card or in your Phone.You can store up to 100 entries in the phone and an additional 250 in the SIM depending on the SIM limitations. Entries stored in the phone allow numbers ofup to 30 digits, and names of up to 16 characters.In standby mode, you can press Right Soft key to immediately accessthe Contacts list. When the name is found by pressing Contacts, press OK and option key to select option sub menu ( you can choose to send Message to, edit, clear, add to group, copy )The Contacts has several menus to select from. These menus appear when youpress Menu ( Left Soft key ) and select Contacts menu by pressing OKkey. Press right soft key ( back ) to move back to the main menu.Read : Show the names stored in phone and / or SIM card.Add: Add new entry (s)Memory Status: Memory status of phone and SIMService dial : Show the phone numbers provided by Service networksSpeed Dial: One button dialing Copy: Copy from SIM (Phone) to Phone (SIM)Clear All Records : Clear all Phone or SIM entriesGroup: Organizing group of ContactsMy number: Inputting your own number[ 1 ] Read (by name)From the Contacts menu, select Read and press left OK key or just press 1. Enter the first letters of the name you need and then the cursor goes to the name you wanted directly after one second or select name using to scroll and press left OK keyAfter choosing one of the name, you can select left option and you can choosefive sub menus.Send Message To: You can send SMS to this entry Edit : You can edit the name and number of this entryClear : You can delete this entry only ( You need to re-confirm )Add to group: You can put this entry to group, but you cannot use SIM entry to a group.Copy: If you select a SIM card’s entry and select Copy, you can copy it to phone memory. If your selection is Phone memory’s entry, Copymeans copy chosen entry to SIM card[ 2 ] Adding a new Contacts EntryTo create a Contacts entry:1) Press Menu > Contacts > Scroll to Add and press OK2) Press Save To SIM or Save To Phone depending on where you want to store the phone entry.3) Add Name and press OK key4) Add Number and press OK key[ 3 ] Memory StatusTo press ‘Memory Status’ and you can see the capacity of SIM card used / SIM card total and Phone used / Phone total.[ 4 ] Service dialYou can check or / and call service number provided by your network Service. This menu may differ depending on the Network services to which youhave subscribed. Not available in all areas. Contact you telephone service provider for availability and details.[ 5 ] Speed Dial1) Press Menu > Contacts2) Scroll to Speed Dial and press OK3) Select one entry. If the numbers are Empty, Press OK > Select Set/Changeand press OK, you can assign one phone number. After choosing one, press OK4) If you assigned one phone number already, you can see four sub categories MAIN MENU MAIN MENUTHE CONTACTSUsing Contact Menus25 26](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-13.png)
![Set / Changes : You can change the assigned number Detail : You can see the number of this entryClear : You can delete this entryDial to : You can dial to this entry[ 5 ] CopyYou can use this function to copy all numbers from the SIM card to your fixedphone, or vice versa:1) Press Menu > Contacts2) Scroll to Copy and press OK3) Press SIM to phone or Phone to SIM depending on where you want to copyall Contacts entries.4) Press YES, then the copy process is done promptly[ 6 ] Clear All RecordsYou can delete all Contacts entries:1) Press Menu > Contacts2) Scroll to Clear all Records and press OK3) Press Phone Records or SIM Records, depending on where you want todelete all Contacts entries.4) Press OK to confirm the deletion of all Contacts entries.5) Select Yes if you want to delete. Otherwise, select No to go back to theprevious menu.[ 7 ] Group Contacts entries can be grouped to some units :1) Press Menu > Contacts2) Scroll to Group and press OK3) And you can see four groups 1) Family 2) Friends 3) Office 4) Others4) Select one and press left OK and you can see the sub menusIn one group, you can select three sub menusGroup Member: You can see entry (s) belongs to the groupRename : You can edit the name of this group itself (Ex> Family ÎHome)Alert Tone: You can change the tone when the member of this group called you. [ 8 ] My NumberYou can check, edit, erase and save your owner number1) Press Menu > Contacts2) Scroll to My number and select Line 1 Number or Line 2 Number3) Save, edit, clear your own number and press OKMAIN MENU MAIN MENUCaution : When complete all information stored in your Contacts will be deleted and can no longer be restored.27 28You can use only phone entries (No SIM entries) and appoint 8 entries.On the idle display, press one assigned button and press Call button or press one assigned number for about 3 seconds till make a call.Ex> If the number assigned in 2 is 01-34-567, just press 2 and Callbutton](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-14.png)
![Requires a subscription to a calling plan that supports this feature. Not available in all areas. Contact you telephone service provider for availability and details.You can send or receive text messages with your phone. Text messages that you receive may contain ring tones that you can store in your phone. It supports160 characters.You can also send maximum about 600 characters. If your message is about600 characters, the phone divides your message into four parts and send thesein each time. This function is called SMS concatenation.After completing the message content, you can choose to send it out right away,or save it as a draft.Write NewInboxOutboxDraftsVoice MailBroadcast MessageMessage SettingsMemory Status[ 1 ] Write NewYou can send a text message to one recipient. You can manually enter each recipient’s phone number, or you can select the numbers from the Contacts.1) Press Menu > Message> OK.2) Scroll to Write New and press OK3) You can create the message.4) When you press OK, you can see three submenus;Only Send : After sending, the message is deletedOnly save : No sending. The message is saved into Drafts.Send and Save : After sending the message is saved into Outbox[ 2 ] InboxWhen a message arrives, a pop-up message is displayed and a new message icon appears. You can read it immediately, or read it later in your Inbox. You can see the icon 1) Press Menu > Message.2) Scroll to the Inbox and press OK.3) From the list, highlight the one you need and press OK.4) You can choose six optionsReply : You can reply your messages. Forward : You can forward the chosen messageEdit: You can edit the chosen message.Clear : You can delete the chosen one.Clear All: You can empty the InboxCut Number : You can cut and save the phone number from Inbox message[ 3 ] OutboxThe Outbox stores messages sent and saved.1) Press Menu > Message.2) Scroll to the Outbox and press OK.3) From the list, highlight the one you need and press OK.4) You can choose six optionsSend: You can send the chosen message. Forward : You can forward the chosen message to othersEdit: You can edit the chosen message.Clear : You can delete the chosen one.Clear All: You can empty the Out boxMAIN MENU MAIN MENUMESSAGENote: The maximum length of a text message differs, depending onthe capabilities of the network from which it originated. Also, text messages may appear different at different timesbecause messages can originate in networks other than your own. Contact your service provider for more information about this feature.29 30](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-15.png)
![Cut Number : You can cut and save the phone number from outbox message.[ 4 ] DraftsYou can see draft messages which you already saved. After choosing one of them, you can have four choicesForward: You can send the chosen message. Edit: You can edit and save the chosen message.Clear : You can delete the chosen one.Clear All: You can empty the draft box.[ 5 ] Voicemail (Network Service)You can listen to your voicemail messages by calling your network voicemailphone number. Voicemail messages are stored in the network voicemail box,not in your phone. Also refer to [ 8 ] section in 19page.1) Press MENU > Message.2) Scroll to Voice Mail and press OK. 3) There are three submenus. Select one and press OKNumber: Enter or modify the network service number.Clear: Delete Pre-saved service numberCall Voice Mail: Dial the network service number and connect to the Voicemail Server.[ 6 ] Broadcast MessageThere are 2 submenus you can chooseReceive ModeLanguages[ 7 ] Message SettingsThere are 5 submenus you can choose.Service Center Number: The SMS Center Number is required in order to send messages. Ask your service provider for this number.Expire Period: Set the period of time the message is stored in the service center. You can set the period for 1 hour, 12 hours, 1 day, 1week, maximum. When the set period expires, the service center willdelete all messages, even if the user has not received the message.Message Type: When you set the message type, the network will convert the message to the type you have set. (Text//Fax//E-mail)Status Report: If you turn On this option, you can be notified if therecipient read your message. Alert Period: you can choose message alert time with one time // Every2 min // Off when we receive new message.[ 8 ] Memory Status Check memory status in the SIM and in the Phone. The total capacity ofSIM is 50, total capacity of phone is 100. Also you can see used area of SIM and phone.MAIN MENU MAIN MENUNote : After the SMS memory in the Phone is full, the phone starts using the memory in the SIM card.31 32](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-16.png)
![The Call History function keeps track of:Incoming CallsOutgoing CallsMissed CallsCall DurationWhen you miss a call (s), the Missed Calls message appears on your phone’s screen. You can press Yes to view the Missed Calls list or press No to ignore the message and go back to Standby. The records will be stored in Call History. You are notified of missed calls only when your phone is turned ON in the service area from which the missed call originated.[ 1 ] Checking Incoming/Outgoing/Missed Call1) Press Menu > Dial Records2) Select Incoming // Outgoing // Missed Call and press OK3) From the list of records, scroll the one you need 4) The screen shows Call Information including Number, Date and Time of receiving.[ 2 ] Call optionsYou can choose some options in related with Missed Calls, Dialed Calls orReceived Calls when you have any call log.1) Press Menu > Dial Records2) Choose one of them; Incoming call / Outgoing call / Missed call and press OK3) You can press left Option4) You can see six different menusDial To: When you choose one entry and select OK, directly calls to. Send Message To: You can send this entry the SMS message without selecting recipient.Clear : You can delete chosen entrySave Number: You can save chosen number to SIM or Phone.Clear all: You can delete all entries in the category (If you select Outgoing call all the Outgoing call entries are deleted)Show Number: You can see the number of chosen entry[ 3 ] Call DurationYou can check the total duration of incoming call and last call durationYou can see Outgoing Duration, Incoming Duration and Last Call Durationin one display.The type of checking time is hh : mm : ss ( h: Hours, m: Minute, s: Second )You can press left Reset to erase all call duration time.MAIN MENU MAIN MENUDIAL RECORDSNote : Your phone can store up to 30 call numbers including missed,received and dialed calls.33 34](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-17.png)
![Setting menu includes:Phone SettingsMelodyDisplayCall SetupNetwork SetupSecurity SetupFactory Default[ 1 ] Phone Settings[ 1.1 ] Clock settingsThis menu guides you to set Time/Date.Date & Time Setting : Set the correct time and date to ensure the Alarm isworking correctly.Date & Time Setting1) Press Menu > Settings > OK2) Scroll Phone Settings and press OK.3) Select Clock Settings then press OK.4) Select Date & Time Setting and press OK.5) Input month / day / year and hour/minute/am or pm by using numeric keysand left and right navigation key6) Press SaveDate Format : There are four types of expressions of datesDD / MM / YY (day / month / last two digits of this year)MM / DD / YYDD / MM / YYYY (day / month / full digits of this year)MM / DD / YYYYDate Separator : There are four types of separators of date digits OO-OO-OO (Hyphen) OO/OO/OO (Slash)OO.OO.OO (Dot) OO OO OO (Blank)Time Format: You can choose 12h or 24 hours. For example, if the time is 1:22 pm ( 12hexpression) , it can be shown as 13:22 (24h expression)[ 1.2 ] LanguageThree languages options can be selected: English / Spanish ( Español ). Alsoyou may choose automatic option ; Your native language can be chosen withoutmanual selection.1) Press Menu > Settings and press OK2) Scroll Phone Settings and press OK3) Select Language and then press OK4) Select the language you need and press OK[ 1.3 ] Answer Mode Normal answer : You can press only answer key to receive the incoming call.You can also can receive the incoming call by pick the handset up without pressany other key.Any key answer : To answer your receiving call, you can press any key except End key. [ 2 ] Melody[ 2.1 ] Melody setupSet Melody for Incoming Call and Message Tone[ 2.2 ] VolumeEight volume levels are available for Call, ring tone and keypad tone. Adjust the volume to your preference using left / right navigation key.MAIN MENU MAIN MENUSETTINGSNote : For each tone setup, you can choose one of 10 ring tones for Incoming call and 4 ring tones for Message Tone.35 36](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-18.png)
![[ 3 ] Display[ 3.1 ] Idle DisplayClock and DateWhen you choose Enable, you can see the date and clock on your idle display [ 3.2 ] Contrast There are 20 levels for LCD contrast. Press right navigation key then thecontrast goes up. Press left navigation key then the contrast is down[ 3.3 ] BacklightSet Specific LCD and Keypad Backlight time.1) Select Backlight and press OK2) Toggle Always off, 5 sec, 15 sec, 30 sec or 45 sec and press OK[ 4 ] Call SetupThe following features may require a subscription to a calling plan that supports them. Not available in all areas. Contact you telephone service provider for availabilityand details[ 4.1 ] Call DivertCall Divert is a network or subscription dependent service. It allows you to forward a call to another number, based on various conditions.1) Press Menu >Settings and press OK2) Scroll Call Setup and press OK3) Press Call Divert and press OK4) Select one of the options below, and then press OKAll Voice Calls : All incoming calls to a designated number.On Busy : Divert all incoming calls when there is at least one call inprogress.No Answer : Divert the incoming call if it is not answered Unreachable : Divert all incoming calls when the phone is not reachabledue to a network error or some other reason.5) Select Check Status, Activate, or Deactivate and press OKCheck Status: Check current Call Divert setting status.Activate: Activate the chosen Call Divert option. Type the number you want a call to be forwarded to.Deactivate: Deactivate the chosen Call Divert option.[ 4.2 ] Call Barring (Network Service)Call Barring is a network or subscription dependent service.This feature allows you to restrict or bar certain or all types of calls to and fromyour phone.1) Press Menu >Settings and press OK2) Scroll Call Setup and press OK3) Press Call Barring and press OK4) Select one of the options below, and then press OKAll Outgoing Calls : Bar all outgoing calls.All Calls abroad : Bar all outgoing international calls.Abroad but Home: Prevent users from making any international calls other than to homeAll Incoming Calls: All Calls Bar all incoming calls.Incoming While Roam: Bar all incoming calls when the phone is roaming.5) Select Check Status, Activate, Deactivate and press OKCheck Status: Check current Call Barring setting status.Activate: the chosen Call Barring option.Deactivate: Deactivate the chosen Call Barring option.[ 4.3 ] Call waiting (Network service)Call Waiting is a network or subscription dependent service.If set to Activate, the Call Waiting feature enables the network to remind you of other incoming calls during a call in progress.MAIN MENU MAIN MENUNote : To activate and deactivate Outgoing, Incoming, and CancelCalls, the SIM password may be required. Contact your serviceprovider.37 38](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-19.png)
![1) Press Menu > Settings and press OK2) Scroll Call Setup and press OK3) Select Call Waiting and press OK4) Select Check Status, Activate, Deactivate and then press OKCheck Status: Check current Call Waiting setting status.Active: Activate Call Waiting functionDeactivate: Deactivate Call Waiting function.[ 4.4 ] Auto RedialSetting the Auto Redial to toggle enable, the phone to keep dialing if the called party is not available.1) Press Menu > Settings and press OK2) Scroll Call Setup and press OK3) Select Auto Redial and press OK4) Toggle Enable or Disable, and then press OK[ 4.5 ] Caller IDCaller ID is a network or subscription dependent service.You can choose to send/hide your phone number to/from the calling party.1) Press Menu > Settings and press OK2) Scroll Call Setup and press OK3) Select Caller ID and press OK4) Toggle Set by Network, Hide Number or Show Number and then press OKSet By Network: Accepts the default value set by Network.Show ID: Shows your phone number to the calling party.Hide ID: Does not show your phone number to the calling party.[ 5 ] Network SetupNetwork Select modeYou can set the phone to automatically search the most suitable network tocamp on or to manually select the network you need.1) Press Menu >Settings and press OK .2) Scroll Network Setup and press OK3) Select Network Select mode and press OK4) Select Automatic selection or Manual selection and then press OK[ 6 ] Security SetupThere are three options available:SIM PIN : Prevent unauthorized use of the SIM card and or the some features of services of telephone service providerPhone Lock : Prevent unauthorized use of the phone.Change Password : Change by inputting the password two times[ 6.1 ] SIM PIN SIM PIN ( SIM Personal Identification number ) is a four-to-eight digit numeric orpassword. It is related with the service of your service provider. For more detail, contact your service provider.1) Press Menu > Settings and press OK2) Scroll Security Set Up and press OK3) Select SIM PIN and press OK4) Select PIN Check, Change PIN1, Change PIN2 and then press OK. PIN Check : Allow or disallow the use of SIM PIN by entering old SIM PIN codeChange PIN 1 : This is a pin code that locks the SIM card until you enter the correct code. The default code is set by the Service Provider. You can change it if you like by entering defaulted PIN code by Service provider, but make sure you don't forget the new codeChange PIN 2 : This SIM card code controls access to some of the more advanced features of the phone. The default code is set by the Service Provider. You can change it if you like by entering defaulted PIN code by Service provider, but make sure you don't forget the new code. Not all networks support pin 2.MAIN MENU MAIN MENUManual mode : The phone starts searching available networks. Usethe up and down key to browse the network list, and press OK to set the highlighted networks Caution: If you unsuccessfully enter the SIM PIN code three times, the SIM card will be Locked. And then contact your telephoneservice provider to get PUK code to unlock SIM card.39 40](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-20.png)
![[ 6.2 ] Phone LockThe default password is “0000”.1) Press Menu > Settings and press OK2) Scroll Security Set Up and press OK3) Select Phone Lock and press OK4) When ‘On’ is chosen, there are two options. Verify when Power-on: Every time you must enter password whenpower onVerify with new SIM: When you change SIM card, you enter thepasswordChange PasswordThis feature allows you to change the password.1) Press Menu > Settings and press OK2) Scroll Security Setup and press OK3) Select Change Password and press OK[ 7 ] Factory DefaultThis feature resets the current settings to the factory default values. The default phone code is “0000”.1) Press Menu > Settings and press OK2) Select Factory Default and press OK3) Enter the 4-digit password and press OKMAIN MENU MAIN MENUNote : You need to input three times. Old password, the new password and confirmation. Every time you enter the input press OKApplications includes:AlarmCalculatorCalendar[ 1 ] AlarmWhen alarm is set, the icon appears on the standby screen.1) Press Menu > Applications and press OK2) Select Alarm and press OK3) Select Alarm 1and or 2 and or 3 for setting alarm and Press OK4) You can select four cases. Off//One time // Mon~Fri // Everyday. Select your favorite by scrolling left and right navigation keys5) After selecting one type, you can go down using up down navigation key and set the alarm time by pressing numeric key ( time ) and left right navigationkey ( am / pm ). 6) After setting the time, you can go down using up down navigation key and choose alarm ring tone by pressing left and right key. There are 3 options of ring tone.7) Press Save[ 2 ] CalculatorYou can calculate 9 digits.Key description:+, -, /, x : Use up / down navigation keys or “*” keys to select.Clear : Press once to clear one digit.APPLICATIONS41 42](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-21.png)
![1) Press Menu > Applications and press OK2) Select Calculator and press OK.3) Enter the first value by number keys4) Select the calculating mark by the up and down navigation keys or ‘ * ‘ button 5) The calculating mark will toggle among , , , by turns6) Enter the second value by number keys7) Press left OK to display the result of calculation. And you can use calculated results using up / down navigation keys in the next calculation.[ 3 ] CalendarYou can examine the month and date by Navigation keys .1) Press Menu > Applications and press OK2) Select Calendar and press OKMAIN MENU MAIN MENU43 44](https://usermanual.wiki/Brightstar/GP855/User-Guide-1043564-Page-22.png)
