Broadcom BRCM1020 802.11g Wireless LAN PCI-E Mini Card User Manual book

Broadcom Corporation 802.11g Wireless LAN PCI-E Mini Card book

Spears User Manual

FILE LOCATION: C:\Projects\Spears\SpearsHTML\title.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 – FOR PROOF ONLYwww.dell.com | support.dell.comTemplate Last Updated - 2/21/2007Dell™ Inspiron™ 1525/1526 Owner’s ManualModel PP29L
FILE LOCATION: C:\Projects\Spears\SpearsHTML\title.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 – FOR PROOF ONLYNotes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.___________________Information in this document is subject to change without notice.© 2007 Dell Inc. All rights reserved.Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Trademarks used in this text: Dell, the DELL logo, Inspiron, Wi-Fi Catcher, and Dell MediaDirect are trademarks of Dell Inc.; Intel and Core are registered trademarks of Intel Corporation.; AMD, AMD Turion, Athlon, Sempron, ATI Radeon and combinations thereof are trademarks of Advanced Micro Devices, Inc.; Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license. Blu-ray Disc is a trademark of the Blu-ray Disc Association.Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.Model PP29LJuly 2007 P/N NN491 Rev. A00
Contents 3ContentsFinding Information . . . . . . . . . . . . . . . . . . . 131 About Your Computer . . . . . . . . . . . . . . . 19Front View . . . . . . . . . . . . . . . . . . . . . . . . 19Left Side View . . . . . . . . . . . . . . . . . . . . . . 25Right Side View . . . . . . . . . . . . . . . . . . . . . 27Back View . . . . . . . . . . . . . . . . . . . . . . . . 29Bottom View . . . . . . . . . . . . . . . . . . . . . . . 302 Setting Up Your Computer . . . . . . . . . . . . 31Connecting to the Internet . . . . . . . . . . . . . . . 31Setting Up Your Internet Connection . . . . . . . . 32Transferring Information to a New Computer . . . . . 33Windows Easy Transfer . . . . . . . . . . . . . . 33Setting Up a Printer . . . . . . . . . . . . . . . . . . . 33Printer Cable . . . . . . . . . . . . . . . . . . . . 34Connecting a USB Printer . . . . . . . . . . . . . 34Power Protection Devices . . . . . . . . . . . . . . . 35Surge Protectors . . . . . . . . . . . . . . . . . . 35Line Conditioners . . . . . . . . . . . . . . . . . . 36Uninterruptible Power Supplies . . . . . . . . . . 36
4Contents3 Using the Display . . . . . . . . . . . . . . . . . . 37Adjusting Brightness . . . . . . . . . . . . . . . . . . 37Switching the Video Image From Your Computer Display To a Projector . . . . . . . . . . . . . . . . . . . . . . . . . 37Setting Display Resolution and Refresh Rate . . . . . . 374 Using the Keyboard and Touchpad . . . . . 39Numeric Keypad . . . . . . . . . . . . . . . . . . . . . 39Key Combinations . . . . . . . . . . . . . . . . . . . . 40System Functions . . . . . . . . . . . . . . . . . . 40Display Functions . . . . . . . . . . . . . . . . . . 40Battery . . . . . . . . . . . . . . . . . . . . . . . 40Power Management . . . . . . . . . . . . . . . . 40Microsoft® Windows® Logo Key Functions . . . 41Dell™ QuickSet Key Combinations . . . . . . . . . 41Adjusting Keyboard Settings . . . . . . . . . . . . 41Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . 41Customizing the Touch Pad . . . . . . . . . . . . . 425 Using a Battery . . . . . . . . . . . . . . . . . . . . 45Battery Performance . . . . . . . . . . . . . . . . . . 45Checking the Battery Charge . . . . . . . . . . . . . . 46Dell QuickSet Battery Meter . . . . . . . . . . . . 46Microsoft® Windows® Battery Meter . . . . . . . 47Low-Battery Warning . . . . . . . . . . . . . . . 47Conserving Battery Power . . . . . . . . . . . . . . . 47
Contents 5Configuring Power Management Settings . . . . . 47Using the Sleep Power State . . . . . . . . . . . 48Charging the Battery . . . . . . . . . . . . . . . . . . 48Replacing the Battery . . . . . . . . . . . . . . . . . . 49Storing a Battery . . . . . . . . . . . . . . . . . . . . 506 Using Multimedia . . . . . . . . . . . . . . . . . . 51Playing Media . . . . . . . . . . . . . . . . . . . . . . 51Playing Media Using Dell Travel Remote (Optional) . . 53Copying CD, DVD, and Blu-ray Disc™ (BD) Media . . . 54How to Copy a CD, DVD or BD . . . . . . . . . . . 55Using Blank CD, DVD, and BD Media . . . . . . . 55Helpful Tips . . . . . . . . . . . . . . . . . . . . . 56Adjusting the Volume . . . . . . . . . . . . . . . . . . 57Adjusting the Picture . . . . . . . . . . . . . . . . . . 58Using Dell MediaDirect™ . . . . . . . . . . . . . . . . 58Connecting Your Computer to a TV or Audio Device . . 59S-Video and Standard Audio . . . . . . . . . . . . 61S-Video and S/PDIF Digital Audio . . . . . . . . . 62Composite Video and Standard Audio . . . . . . . 64Composite Video and S/PDIF Digital Audio . . . . 66Component Video and Standard Audio . . . . . . 68Component Video and S/PDIF Digital Audio . . . . 71HDMI (Optional) . . . . . . . . . . . . . . . . . . 74Enabling the Display Settings for a TV . . . . . . . 75
6Contents7 Using the Optional Camera . . . . . . . . . . . 77Accessing the Camera’s Help File . . . . . . . . . . . 77Manually Adjusting the Camera Settings . . . . . . . . 78Creating a Picture or a Video . . . . . . . . . . . . . . 788 Using Cards . . . . . . . . . . . . . . . . . . . . . . . 81ExpressCards . . . . . . . . . . . . . . . . . . . . . . 81ExpressCard Blanks . . . . . . . . . . . . . . . . . . . 82Installing an ExpressCard . . . . . . . . . . . . . . . . 82Removing an ExpressCard or Blank . . . . . . . . . . . 83Memory Card Reader . . . . . . . . . . . . . . . . . . 83Memory Card Blanks . . . . . . . . . . . . . . . . 83Installing a Memory Card . . . . . . . . . . . . . . . . 84Removing a Memory Card or Blank . . . . . . . . . . . 859 Setting Up and Using Networks . . . . . . . 87Connecting a Network or Broadband Modem Cable . . 87Setting Up a Network . . . . . . . . . . . . . . . . . . 88Wireless Local Area Network . . . . . . . . . . . . . 88What You Need to Establish a WLAN Connection . 88Checking Your Wireless Network Card . . . . . . 89Setting Up a New WLAN Using a Wireless Router and a Broadband Modem . . . . . . . . . . . . . . . . . 89Connecting to a WLAN . . . . . . . . . . . . . . . 91
Contents 7Mobile Broadband (or Wireless Wide Area Network) . 92What You Need to Establish a Mobile Broadband Network Connection . . . . . . . . . . . . . . . . . . . . . 93Checking Your Dell Mobile Broadband Card . . . . 93Connecting to a Mobile Broadband Network . . . 94Enabling/Disabling the Dell Mobile Broadband Card 94Dell Wi-Fi Catcher™ Network Locator . . . . . . . . . 9510 Securing Your Computer . . . . . . . . . . . . . 97Security Cable Lock . . . . . . . . . . . . . . . . . . . 97Passwords . . . . . . . . . . . . . . . . . . . . . . . . 97If Your Computer Is Lost or Stolen . . . . . . . . . . . 9811 Troubleshooting . . . . . . . . . . . . . . . . . . 101Dell Technical Update Service . . . . . . . . . . . . . 101Dell Diagnostics . . . . . . . . . . . . . . . . . . . . . 101Dell Support Utility . . . . . . . . . . . . . . . . . . . 105Drive Problems . . . . . . . . . . . . . . . . . . . . . 106Optical drive problems . . . . . . . . . . . . . . . 106Hard drive problems . . . . . . . . . . . . . . . . 107E-Mail, Modem, and Internet Problems . . . . . . . . 108Error Messages . . . . . . . . . . . . . . . . . . . . . 109ExpressCard Problems . . . . . . . . . . . . . . . . . 114IEEE 1394 Device Problems . . . . . . . . . . . . . . . 115
8ContentsKeyboard Problems . . . . . . . . . . . . . . . . . . . 115External Keyboard problems . . . . . . . . . . . . 115Unexpected characters . . . . . . . . . . . . . . 116Lockups and Software Problems . . . . . . . . . . . . 117The computer does not start . . . . . . . . . . . . 117The computer stops responding . . . . . . . . . . 117A program stops responding or crashes repeatedly 117A program is designed for an earlier Microsoft® Windows® operating system . . . . . . . . . . . . . . . . . . 117A solid blue screen appears . . . . . . . . . . . . 118Dell MediaDirect problems . . . . . . . . . . . . . 118Other software problems . . . . . . . . . . . . . . 118Memory Problems . . . . . . . . . . . . . . . . . . . . 119Network Problems . . . . . . . . . . . . . . . . . . . . 120Mobile Broadband (Wireless Wide Area Network [WWAN]) 120Power Problems . . . . . . . . . . . . . . . . . . . . . 121Printer Problems . . . . . . . . . . . . . . . . . . . . . 122Scanner Problems . . . . . . . . . . . . . . . . . . . . 123Sound and Speaker Problems . . . . . . . . . . . . . . 124No sound from integrated speakers . . . . . . . . 124No sound from external speakers . . . . . . . . . 124No sound from headphones . . . . . . . . . . . . 125Touch Pad or Mouse Problems . . . . . . . . . . . . . 125Video and Display Problems . . . . . . . . . . . . . . 126If the display is blank . . . . . . . . . . . . . . . . 126If the display is difficult to read . . . . . . . . . . 126If only part of the display is readable . . . . . . . 127
Contents 9Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . 127What Is a Driver? . . . . . . . . . . . . . . . . . . 127Identifying Drivers . . . . . . . . . . . . . . . . . 128Reinstalling Drivers and Utilities . . . . . . . . . . 128Troubleshooting Software and Hardware Problems . . 131Restoring Your Operating System . . . . . . . . . . . . 131Using Microsoft Windows System Restore . . . . 132Using the Operating System Media . . . . . . . . 13312 Adding and Replacing Parts . . . . . . . . . 135Before You Begin . . . . . . . . . . . . . . . . . . . . 135Recommended Tools . . . . . . . . . . . . . . . . 135Turning Off Your Computer . . . . . . . . . . . . . 135Before Working Inside Your Computer . . . . . . . 136Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . 137Removing the Hard Drive . . . . . . . . . . . . . 138Replacing the Hard Drive . . . . . . . . . . . . . 139Returning a Hard Drive to Dell . . . . . . . . . . . 139Optical Drive . . . . . . . . . . . . . . . . . . . . . . 140Removing the Optical Drive . . . . . . . . . . . . 140Replacing the Optical Drive . . . . . . . . . . . . 141Hinge Cover . . . . . . . . . . . . . . . . . . . . . . . 141Removing the Hinge Cover . . . . . . . . . . . . . 141Replacing the Hinge Cover . . . . . . . . . . . . . 142Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . 142Removing the Keyboard . . . . . . . . . . . . . . 143Replacing the Keyboard . . . . . . . . . . . . . . 144
10 ContentsMemory . . . . . . . . . . . . . . . . . . . . . . . . . 144Removing Memory Module . . . . . . . . . . . . 144Replacing Memory Module . . . . . . . . . . . . 146Subscriber Identity Module (Optional) . . . . . . . . . 147Wireless Mini-Cards . . . . . . . . . . . . . . . . . . 148Removing Mini-Card . . . . . . . . . . . . . . . . 149Replacing Mini-Card . . . . . . . . . . . . . . . . 151Flash Cache Module . . . . . . . . . . . . . . . . . . . 152Removing the FCM . . . . . . . . . . . . . . . . . 152Replacing the FCM . . . . . . . . . . . . . . . . . 153Broadcom® Media PC Card . . . . . . . . . . . . . . . 153Internal Card With Bluetooth® Wireless Technology . 153Removing the Card . . . . . . . . . . . . . . . . . 154Replacing the Card . . . . . . . . . . . . . . . . . 15413 Traveling With Your Computer . . . . . . . . 155Identifying Your Computer . . . . . . . . . . . . . . . . 155Packing the Computer . . . . . . . . . . . . . . . . . . 155Travel Tips . . . . . . . . . . . . . . . . . . . . . . . . 156Traveling by Air . . . . . . . . . . . . . . . . . . . 15614 Getting Help . . . . . . . . . . . . . . . . . . . . . . 157Obtaining Assistance . . . . . . . . . . . . . . . . . . 157Technical Support and Customer Service . . . . . 158DellConnect . . . . . . . . . . . . . . . . . . . . . 158Online Services . . . . . . . . . . . . . . . . . . . 158
Contents 11AutoTech Service . . . . . . . . . . . . . . . . . 159Automated Order-Status Service . . . . . . . . . 159Problems With Your Order . . . . . . . . . . . . . . . 159Product Information . . . . . . . . . . . . . . . . . . . 160Returning Items for Warranty Repair or Credit . . . . . 160Before You Call . . . . . . . . . . . . . . . . . . . . . 161Contacting Dell . . . . . . . . . . . . . . . . . . . . . 16315 Specifications . . . . . . . . . . . . . . . . . . . . 165A Appendix . . . . . . . . . . . . . . . . . . . . . . . . 175Using the System Setup Program . . . . . . . . . . . . 175Viewing the System Setup Screen . . . . . . . . . 176System Setup Screen . . . . . . . . . . . . . . . 176Commonly Used Options . . . . . . . . . . . . . . 176Cleaning Your Computer . . . . . . . . . . . . . . . . 178Computer, Keyboard, and Display . . . . . . . . . 178Touch Pad . . . . . . . . . . . . . . . . . . . . . 178Mouse . . . . . . . . . . . . . . . . . . . . . . . 179Media . . . . . . . . . . . . . . . . . . . . . . . . 179Dell Technical Support Policy (U.S. Only) . . . . . . . 180Definition of "Dell-Installed" Software and Peripherals 180Definition of "Third-Party" Software and Peripherals 180FCC Notice (U.S. Only) . . . . . . . . . . . . . . . . . . 181FCC Class B . . . . . . . . . . . . . . . . . . . . . 181Macrovision Product Notice . . . . . . . . . . . . . . 182
12 ContentsGlossary 183Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Finding Information 13Finding Information NOTE: Some features may be optional and may not ship with your computer. Some features may not be available in certain countries. NOTE: Additional information may ship with your computer.What Are You Looking For? Find It Here• A diagnostic program for my computer• Drivers for my computer• Device documentation• Notebook System Software (NSS)Drivers and Utilities MediaDocumentation and drivers are already installed on your computer. You can use the Drivers and Utilities media to reinstall drivers (see "Reinstalling Drivers and Utilities" on page 128) or run the Dell Diagnostics (see "Dell Diagnostics" on page 101).Readme files may be included on your Drivers and Utilities media to provide last-minute updates about technical changes to your computer or advanced technical-reference material for technicians or experienced users.NOTE: Drivers and documentation updates can be found at support.dell.com.
14 Finding Information• Warranty information• Terms and Conditions (U.S. only)• Safety instructions• Regulatory information• Ergonomics information• End User License AgreementDell™ Product Information Guide• How to set up my computerSetup DiagramWhat Are You Looking For? Find It Here
Finding Information 15Service Tag and Express Service Code Microsoft Windows License LabelService Tag and Microsoft® Windows® LicenseThese labels are located on your computer.• Use the Service Tag to identify your computer when you use support.dell.com or contact support. • Enter the Express Service Code to direct your call when contacting support.NOTE: As an increased security measure, the newly designed Microsoft Windows license label incorporates a missing portion or "hole" to discourage removal of the label.What Are You Looking For? Find It Here
16 Finding Information• Solutions — Troubleshooting hints and tips, articles from technicians, online courses, and frequently asked questions• Community — Online discussion with other Dell customers• Upgrades — Upgrade information for components, such as the memory, hard drive, and operating system• Customer Care — Contact information, service call and order status, and warranty and repair information• Service and support — Service call status, support history, service contract, and online discussions with support• Dell Technical Update Service — Proactive e-mail notification of software and hardware updates for your computer• Reference — Computer documentation, details on my computer configuration, product specifications, and white papers• Downloads — Certified drivers, patches, and software updates• Notebook System Software (NSS) — If you reinstall the operating system on your computer, you should also reinstall the NSS utility. NSS automatically detects your computer and operating system, and installs the updates appropriate for your configuration, providing critical updates for your operating system and support for Dell 3.5-inch USB floppy drives, Intel® processors, optical drives, and USB devices. NSS is necessary for correct operation of your Dell computer.Dell Support Website — support.dell.comNOTE: Select your region or business segment to view the appropriate support site.To download Notebook System Software:1Go to support.dell.com, select your country/region, and then click Drivers & Downloads.2Enter your Service Tag or product model, and then click Go.3Select your operating system and language, and then click Find Downloads, or under Downloads Search, search for the keyword Notebook System Software.NOTE: The support.dell.com user interface may vary depending on your selections.What Are You Looking For? Find It Here
Finding Information 17• Software upgrades and troubleshooting hints — Frequently asked questions, hot topics, and general health of your computing environmentDell Support UtilityThe Dell Support Utility is an automated upgrade and notification system installed on your computer. This support provides real-time health scans of your computing environment, software updates, and relevant self-support information. Access the Dell Support Utility from the icon on the taskbar. For more information, see "Dell Support Utility" on page 105.• How to use Microsoft Windows Vista™• How to work with programs and files• How to personalize my desktopWindows Help and Support1Click the Windows Vista Start button , and then click Help and Support.2In Search Help, type a word or phrase that describes your problem, and then press <Enter> or click the magnifying glass.3Click the topic that describes your problem.4Follow the instructions on the screen.• Information on network activity, the Power Management Wizard, hotkeys, and other items controlled by Dell QuickSetDell QuickSet HelpTo view Dell QuickSet Help, right-click the QuickSet icon in the Microsoft® Windows® taskbar, and select Help. The taskbar is located in the lower-right corner of your screen.What Are You Looking For? Find It Here
18 Finding Information• How to reinstall my operating systemOperating System MediaThe operating system is already installed on your computer. To reinstall your operating system, use one of the following methods:• Microsoft Windows System Restore — Microsoft Windows System Restore returns your computer to an earlier operating state without affecting data files.• Operating System Installation Media — If you received operating system media with your computer, you can use it to restore your operating system.For more information, see "Restoring Your Operating System" on page 131.After you reinstall your operating system, use the Drivers and Utilities media to reinstall drivers for the devices that came with your computer.Your operating system product key label is located on your computer.NOTE: The color of your operating system installation media varies according to the operating system you ordered.What Are You Looking For? Find It Here
About Your Computer 19About Your ComputerFront View3415514 76172113 11 10 816912
20 About Your ComputerCAMERA INDICATOR —Indicates that the camera is on. Based on configuration selections you made when ordering your computer, your computer may not include a camera.CAMERA —Built-in camera for video capture, conferencing, and chat. Based on configuration selections you made when ordering your computer, your computer may not include a camera.DISPLAY —For more information about your display, see "Using the Display" on page 39.POWER BUTTON —Press the power button to turn on the computer or exit a power management mode (see "Configuring Power Management Settings" on page 50). NOTICE: To avoid losing data, turn off your computer by performing a Microsoft® Windows® operating system shutdown rather than by pressing the power button.If the computer stops responding, press and hold the power button until the computer turns off completely (may take several seconds).MEDIA CONTROL BUTTONS —Control CD, DVD, and Media Player playback.1camera indicator (optional) 2camera (optional)3display 4power button5media control buttons (7) 6keyboard7touch pad 88-in-1 media card reader9analog microphone 10 microphone connector11 headphone connectors (2) 12 consumer IR13 touch pad buttons (2) 14 device status lights15 Dell MediaDirect™ button 16 keyboard status lights17 digital array microphones (optional)Mute the sound Play the previous trackTurn the volume down Play the next trackTurn the volume up Stop
About Your Computer 21KEYBOARD —For more information about the keyboard, see "Using the Keyboard and Touchpad" on page 41. TOUCH PAD —Provides the functionality of a mouse (see "Touch Pad" on page 43).8-IN-1 MEDIA CARD READER —Provides a fast and convenient way to view and share digital photos, music, and videos stored on a media memory card. The computer ships with a plastic blank installed in the slot. The 8-in-1 memory card reader reads the following digital media memory cards:• Secure Digital (SD) memory card• Secure Digital Input Output (SDIO) card• MultiMediaCard (MMC)•Memory Stick • Memory Stick PRO • xD-Picture Card • Hi Speed-SD• Hi Density-SDANALOG MICROPHONE —Integrated single microphone for conferencing and chat.AUDIO CONNECTORSPlay or pauseAttach headphones to the connector
22 About Your ComputerCONSUMER IR — Infrared sensor for using the Dell travel remote control.TOUCH PAD BUTTONS —Use these buttons much like the buttons on a mouse when you use the touch pad to move the cursor on the display (see "Touch Pad" on page 43).DEVICE STATUS LIGHTSThe lights located on the palm rest towards the front of the computer indicate the following:Attach a microphone to the connectorPower light – Turns on when you turn on the computer, and blinks when the computer is in a power management mode. Hard drive activity light – Turns on when the computer reads or writes data. NOTICE: To avoid loss of data, never turn off the computer while the light is flashing.Battery status light – Turns on steadily or blinks to indicate battery charge status.
About Your Computer 23If the computer is connected to an electrical outlet, the light operates as follows:– Solid blue: The battery is charging.– Flashing blue: The battery is almost fully charged.– Off: The battery is adequately charged.If the computer is running on a battery, the light operates as follows:– Off: The battery is adequately charged (or the computer is turned off).– Flashing orange: The battery charge is low.– Solid orange: The battery charge is critically low.DELL MEDIADIRECT™ BUTTON —Press the Dell MediaDirect button to launch Dell MediaDirect (see "Using Dell MediaDirect™" on page 62).WiFi status light – Turns on when wireless networking is enabled. To enable or disable wireless networking, use the wireless switch (see "wireless switch" on page 27).Bluetooth® status light – Turns on when a card with Bluetooth wireless technology is enabled.NOTE: The card with Bluetooth wireless technology is an optional feature. The light turns on only if you ordered the card with your computer. For more information, see the documentation that came with your card.To turn off only the Bluetooth wireless technology functionality, right-click the icon in the notification area, and then click Disable Bluetooth Radio.To quickly enable or disable all wireless devices, use the wireless switch (see "wireless switch" on page 24).
24 About Your ComputerKEYBOARD STATUS LIGHTSThe blue lights located above the keyboard indicate the following:DIGITAL ARRAY MICROPHONES —Built-in microphone for conferencing and chat. NOTE: Digital array microphones are optional and may not be present in your computer unless you have ordered for the optional camera. Instead, your computer will have an integrated single analog microphone.Turns on when the numeric keypad is enabled.Turns on when the uppercase letter (caps lock) function is enabled.Turns on when the scroll lock function is enabled.9A
About Your Computer 25Left Side ViewSECURITY CABLE SLOT —Lets you attach a commercially available antitheft device to the computer (see "Security Cable Lock" on page 97).AC ADAPTER CONNECTOR —Attaches an AC adapter to the computer. The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned on or off.1security cable slot 2AC power adapter3USB connectors (2) 4video connector (VGA)5network connector (RJ-45) 6modem connector (RJ-11) (optional)7HDMI connector (optional) 8IEEE 1394a connector (optional)9hard drive127934 5 6 8
26 About Your Computer CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage. NOTICE: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly, but gently to help prevent damage to the cable. NOTE: Plug the power cord and the adapter firmly in, and ensure that the green LED is on.USB CONNECTORS VIDEO CONNECTORNETWORK CONNECTOR (RJ-45)MODEM CONNECTOR (RJ-11) NOTE: Your computer may not ship with a modem unless you have ordered one.Connect USB devices, such as a mouse, keyboard, or printer.Connects video devices, such as a monitor.Connects the computer to a network. The two lights next to the connector indicate status and activity for wired network connections.For information on using the network adapter, see the device user’s guide supplied with your computer.Connect the telephone line to the modem connector.For information on using the modem, see the online modem documentation supplied with your computer.
About Your Computer 27This port may be covered with a blank if your computer does not have a modem installed.HDMI CONNECTOR —HDMI (High-Definition Multimedia Interface) connector carries an uncompressed all digital signal to produce hi-definition video and audio.IEEE 1394 CONNECTOR —Connects devices supporting IEEE 1394a high-speed transfer rates, such as some digital video cameras.HARD DRIVE —Stores software and data.Right Side ViewWIRELESS SWITCH —When enabled through Dell QuickSet, this switch can scan for a wireless local area network (WLAN) in your vicinity. You can also use it to rapidly turn off or on any wireless devices such as WLAN cards and internal cards with Bluetooth wireless technology (see "Dell Wi-Fi Catcher™ Network Locator" on page 95).1wireless switch (optional) 2Wi-Fi Catcher light (optional)3ExpressCard slot 4optical drive5eject button 6S-video TV-out connector (optional)7USB connectors (2)NOTE: One of the two USB connectors is optional.1 5 67432
28 About Your ComputerEXPRESSCARD SLOT —Supports one ExpressCard. The computer ships with a plastic blank installed in the slot. For more information, see "Using Cards" on page 85.OPTICAL DRIVE —For more information about the optical drive, see "Using Multimedia" on page 55.EJECT BUTTON —Press the eject button to open the optical drive.1off Disables wireless devices2on Enables wireless devices3momentary Scans for WLAN networks (see "Dell Wi-Fi Catcher™ Network Locator" on page 95).4Wi-Fi Catcher light•Flashing blue: Searching for networks•Solid blue: Strong network found•Solid yellow: Weak network found•Off: No signal found1 2 34
About Your Computer 29S-VIDEO TV-OUT CONNECTORUSB CONNECTORS NOTE: Your computer may have one or two USB connectors depending on what you ordered.Back View CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire.AIR VENTS —The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating. The computer turns the fan on when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer.Connects your computer to a TV. Also connects digital audio-capable devices using the TV/digital audio adapter cable.Connect USB devices, such as a mouse, keyboard, or printer.1battery 2air vents21
30 About Your ComputerBottom ViewBATTERY —When a battery is installed, you can use the computer without connecting the computer to an electrical outlet (see "Using a Battery" on page 45).BATTERY RELEASE LATCH —Releases the battery (see "Replacing the Battery" on page 49 for instructions).PROCESSOR/MEMORY MODULE/MINI-CARD COMPARTMENT —Compartment that contains the memory modules, WLAN, WWAN, Ultra Wideband (UWB) cards or Flash Cache Module (FCM) (see "Wireless Mini-Cards" on page 148).HARD DRIVE —Stores software and data.OPTICAL DRIVE —For more information about the optical drive, see "Using Multimedia" on page 51.1battery 2battery release latch3processor/memory module/mini-card compartment4hard drive5optical drive2 3451
Setting Up Your Computer 31Setting Up Your ComputerConnecting to the Internet NOTE: Internet Service Providers (ISPs) and ISP offerings vary by country.To connect to the Internet, you need a modem or network connection and an Internet service provider (ISP). Your ISP will offer one or more of the following Internet connection options:• DSL connections that provide high-speed Internet access through your existing telephone line or cellular telephone service. With a DSL connection, you can access the Internet and use your telephone on the same line simultaneously.• Cable modem connections that provide high-speed Internet access through your local cable TV line.• Satellite modem connections that provide high-speed Internet access through a satellite television system.• Dial-up connections that provide Internet access through a telephone line. Dial-up connections are considerably slower than DSL, cable, and satellite modem connections.• Wireless Wide Area Network (WWAN) or Mobile Broadband technology provides a connection to the Internet using cellular technology at broadband rates.• Wireless Local Area Network (WLAN) connections use high-frequency radio waves to communicate. Typically, a wireless router is connected to the broadband cable or DSL modem that broadcasts the Internet signal to your computer.If you are using a dial-up connection, connect a telephone line to the modem connector on your computer and to the telephone wall jack before you set up your Internet connection. If you are using a DSL, cable, or satellite modem connection, contact your ISP or cellular telephone service for setup instructions. NOTE: Your computer may not ship with a modem unless you have ordered one.
32 Setting Up Your ComputerSetting Up Your Internet ConnectionTo set up an Internet connection with a provided ISP desktop shortcut:1Save and close any open files, and exit any open programs.2Double-click the ISP icon on the Microsoft® Windows® desktop.3Follow the instructions on the screen to complete the setup. NOTE: If you are having problems connecting to the Internet, see "E-Mail, Modem, and Internet Problems" on page 108. If you cannot connect to the Internet, but have successfully connected in the past, the ISP may have a service outage. Contact your ISP to check the service status, or try connecting again later. NOTE: Have your ISP information ready. If you do not have an ISP, the Connect to the Internet wizard can help you obtain one.If you do not have an ISP icon on your desktop or if you want to set up an Internet connection with a different ISP:1Save and close any open files, and exit any open programs.2Click Start , and then click Control Panel.3Under Network and Internet, click Connect to the Internet.The Connect to the Internet window appears.4Click either Broadband (PPPoE), Wireless, or Dial-up, depending on how you want to connect:• Choose Broadband if you will use a DSL modem, cable TV modem, or satellite modem.• Choose Wireless if you will use a wireless connection through a WLAN card.• Choose Dial-up if you will use a dial-up modem or ISDN. NOTE: If you do not know which type of connection to select, click Help me choose or contact your ISP.5Follow the instructions on the screen and use the setup information provided by your ISP to complete the setup.
Setting Up Your Computer 33Transferring Information to a New ComputerYou can transfer the following types of data from one computer to another:• E-mail messages• Toolbar settings• Window sizes• Internet bookmarksUse one of the following methods for transferring data:• Windows Easy Transfer wizard, an Easy Transfer Cable, and a USB port• Over a network• Removable media, such as a writable CDWindows Easy Transfer1Click Start → All Programs→ Accessories→ System Tools→ Windows Easy Transfer.2In the User Account Control dialog box, click Continue.3Click Next.4Click Start a new transfer or Continue a transfer in progress.5Follow the instructions in the Windows Easy Transfer wizard.Setting Up a Printer NOTICE: Complete the operating system setup before you connect a printer to the computer.See the documentation that came with the printer for setup information, including how to:• Obtain and install updated drivers.• Connect the printer to the computer.• Load paper and install the toner or ink cartridge.For technical assistance, refer to the printer owner's manual or contact the printer manufacturer.
34 Setting Up Your ComputerPrinter CableYour printer connects to your computer with a USB cable. Your printer may not come with a printer cable, so if you purchase a cable separately, ensure that it is compatible with your printer and computer. If you purchased a printer cable at the same time you purchased your computer, the cable may arrive in the computer’s shipping box.Connecting a USB Printer NOTE: You can connect USB devices while the computer is turned on.1Complete the operating system setup if you have not already done so.2Attach the USB printer cable to the USB connectors on the computer and the printer. The USB connectors fit only one way.1 USB connector on computer 2 USB connector on printer3 USB printer cable321
Setting Up Your Computer 353Turn on the printer, and then turn on the computer.If the Add New Hardware Wizard window appears, click Cancel.4Click Start , and then click Network. 5Click Add a printer to start the Add Printer Wizard. NOTE: To install the printer driver, see "Reinstalling Drivers and Utilities" on page 128 and the documentation that came with your printer.6Click Add a local printer or Add a network, wireless, or Bluetooth printer.7Follow the instructions in the Add Printer Wizard.Power Protection DevicesSeveral devices are available to protect against power fluctuations and failures:• Surge protectors• Line conditioners• Uninterruptible power supplies (UPS)Surge ProtectorsSurge protectors and power strips equipped with surge protection help prevent damage to your computer from voltage spikes that can occur during electrical storms or after power interruptions. Some surge protector manufacturers include warranty coverage for certain types of damage. Carefully read the device warranty when choosing a surge protector. A device with a higher joule rating offers more protection. Compare joule ratings to determine the relative effectiveness of different devices. NOTICE: Most surge protectors do not protect against power fluctuations or power interruptions caused by nearby lightning strikes. When lightning occurs in your area, disconnect the telephone line from the telephone wall jack and disconnect your computer from the electrical outlet.Many surge protectors have a telephone jack for modem protection. See the surge protector documentation for modem connection instructions. NOTICE: Not all surge protectors offer network adapter protection. Disconnect the network cable from the network wall jack during electrical storms.
36 Setting Up Your ComputerLine Conditioners NOTICE: Line conditioners do not protect against power interruptions.Line conditioners are designed to maintain AC voltage at a fairly constant level.Uninterruptible Power Supplies NOTICE: Loss of power while data is being saved to the hard drive may result in data loss or file damage. NOTE: To ensure maximum battery operating time, connect only your computer to a UPS. Connect other devices, such as a printer, to a separate power strip that provides surge protection.A UPS protects against power fluctuations and interruptions. UPS devices contain a battery that provides temporary power to connected devices when AC power is interrupted. The battery charges while AC power is available. See the UPS manufacturer documentation for information on battery operating time and to ensure that the device is approved by Underwriters Laboratories (UL).
Using the Display 37Using the DisplayAdjusting BrightnessWhen a Dell™ computer is running on battery power, you can conserve power by setting the display brightness to the lowest comfortable level.• Press <Fn> and the up-arrow key to increase brightness on the integrated display only (not on an external monitor).• Press <Fn> and the down-arrow key to decrease brightness on the integrated display only (not on an external monitor). NOTE: Brightness key combinations only affect the display on your portable computer, not monitors or projectors that you attach to your portable computer or docking device. If your computer is connected to an external monitor and you try to change the brightness level, the Brightness Meter may appear, but the brightness level on the external device does not change.Switching the Video Image From Your Computer Display To a ProjectorWhen you start the computer with an external device attached (such as an external monitor or projector) and turned on, the image may appear on either the computer display or the external device.Press <Fn><F8> to switch the video image between the display only, the external device only, or the display and the external device simultaneously.Setting Display Resolution and Refresh Rate NOTE: If you change the display resolution from the current settings, the image may appear blurry or text may be hard to read if you change the resolution to one not supported by your computer and display. Before you change any of the display settings, make a note of the current settings so you can change back to the previous settings if needed.
38 Using the DisplayYou can enhance the legibility of text and change the appearance of images on the screen by adjusting display resolution. As you increase resolution, items appear smaller on the screen. In contrast, lower resolution causes text and images to appear larger and can benefit people with vision impairments. To display a program at a specific resolution, both the video card and the display must support the program, and the necessary video drivers must be installed. NOTE: Use only the Dell-installed video drivers, which are designed to offer the best performance with your Dell-installed operating system.If you choose a resolution or color palette that is higher than the display supports, the settings adjust automatically to the closest supported values.To set the display resolution and refresh rate for your display:1Click Start → Control Panel.2Under Appearance and Personalization, click Adjust screen resolution.3In the Display Settings window, under Resolution, move the slide bar to the left or right to decrease/increase the screen resolution. NOTE: For additional instructions, click How do I get the best display?
Using the Keyboard and Touchpad 39Using the Keyboard and TouchpadNumeric KeypadThe numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, hold down <Fn> and press the desired key.• To enable the keypad, press <Num Lk>. The light indicates that the keypad is active.• To disable the keypad, press <Num Lk> again. numeric keypad9
40 Using the Keyboard and TouchpadKey CombinationsSystem FunctionsDisplay FunctionsBatteryPower Management<Ctrl><Shift><Esc> Opens the Task Manager window.<Fn><F8> Displays icons representing all currently available display options (display only, external monitor or projector only, both display and projector, etc). Highlight the desired icon to switch the display to that option.<Fn> and up-arrow key Increases brightness on the integrated display only (not on an external monitor).<Fn> and down-arrow key Decreases brightness on the integrated display only (not on an external monitor).<Fn><F3> Displays the Dell™ QuickSet Battery Meter (see "Dell QuickSet Battery Meter" on page 46).<Fn><Esc> Activates a power management mode. You can reprogram this keyboard shortcut to activate a different power management mode using the Advanced tab in the Power Options Properties window (see "Configuring Power Management Settings" on page 47).
Using the Keyboard and Touchpad 41Microsoft® Windows® Logo Key FunctionsDell™ QuickSet Key CombinationsIf Dell QuickSet is installed, you can use other shortcut keys for functions such as the Battery Meter or activating power management modes. For more information about Dell QuickSet key combinations, right-click the QuickSet icon in the notification area, and then click Help.Adjusting Keyboard SettingsTo adjust keyboard operation, such as the character repeat rate:1Click Start , and then click Control Panel.2Click Hardware and Sound.3Click Keyboard.Touch PadThe touch pad detects the pressure and movement of your finger to allow you to move the cursor on the display. Use the touch pad and touch pad buttons as you would use a mouse.Windows logo key and <m> Minimizes all open windows.Windows logo key and <Shift><m>Restores all minimized windows. This key combination functions as a toggle to restore minimized windows following the use of the Windows logo key and <m> combination. Windows logo key and <e> Starts Windows Explorer.Windows logo key and <r> Opens the Run dialog box.Windows logo key and <f> Opens the Search Results dialog box.Windows logo key and <Ctrl><f>Opens the Search Results-Computer dialog box (if the computer is connected to a network).Windows logo key and <Pause> Opens the System Properties dialog box.Windows logo key and <Tab> Opens the 3D Windows Flip on Windows Vista
42 Using the Keyboard and Touchpad• To move the cursor, lightly slide your finger over the touch pad.• To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch pad button.• To select and move (or drag) an object, position the cursor on the object and tap twice on the touch pad. On the second tap, leave your finger on the touch pad and move the selected object by sliding your finger over the surface. • To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch pad button twice.Customizing the Touch PadYou can use the Mouse Properties window to disable the touch pad or adjust the touch pad settings.1Click Start , and then click Control Panel.2Click Hardware and Sound.1 touch pad 2 scroll zones12
Using the Keyboard and Touchpad 433Click Keyboard.4In the Mouse Properties window:• Click the Device Select tab to disable the touch pad.• Click the Touch Pad tab to adjust touch pad settings.5Click OK to save the settings and close the window.
44 Using the Keyboard and Touchpad
Using a Battery 45Using a BatteryBattery Performance NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate paper warranty document that shipped with your computer.For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable computer with the main battery installed at all times. One battery is supplied as standard equipment in the battery bay. NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an electrical outlet the first time you use the computer. For best results, operate the computer with the AC adapter until the battery is fully charged. To view battery charge status, place the mouse cursor over the battery icon in the Windows notification area. NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how often the battery is used and the conditions under which it is used, you may need to purchase a new battery during the life of your computer. NOTE: It is recommended that you connect your computer to an electrical outlet when writing to media.Battery operating time varies depending on operating conditions. Operating time is significantly reduced when you perform operations including, but not limited to, the following:• Using optical drives.• Using wireless communications devices, ExpressCards, media memory cards, or USB devices.• Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as complex 3D graphics applications.• Running the computer in maximum performance mode (see "Configuring Power Management Settings" on page 47 for information about accessing Windows Power Options Properties or Dell QuickSet, which you can use to configure power management settings).
46 Using a BatteryYou can check the battery charge before you insert the battery into the computer. You can also set power management options to alert you when the battery charge is low. CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell computer. Do not use batteries from other computers with your computer. CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery (see "Battery Disposal" in the Product Information Guide). CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children. Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury or equipment damage. Checking the Battery ChargeYou can check the battery charge on your computer using any one of the following methods:• Dell QuickSet Battery Meter• Microsoft Windows battery meter icon located in the notification area• Low-battery warning pop-up windowDell QuickSet Battery MeterTo view the Dell QuickSet Battery Meter:• Double-click the Dell QuickSet icon in the taskbar, and then click Battery Meteror • Press <Fn><F3>The Battery Meter displays the status, battery health, charge level, and charge completion time for the battery in your computer. For more information about QuickSet, right-click the QuickSet icon, and then click Help.
Using a Battery 47Microsoft® Windows® Battery MeterThe battery meter indicates the remaining battery charge. To check the battery meter, double-click the icon in the notification area. Check the Battery HealthYou can check battery health by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the QuickSet icon in the notification area, and then click Help.Low-Battery Warning NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning, then connect the computer to an electrical outlet. If the battery runs completely out of power, Sleep state begins automatically.A pop-up window warns you when the battery charge is approximately 90 percent depleted. The computer enters Sleep state when the battery charge is at a critically low level.You can change the settings for the battery alarms in Dell QuickSet or the Power Options window (see "Configuring Power Management Settings" on page 47).Conserving Battery PowerTo conserve battery power on your portable computer, do any of the following:• Connect the computer to an electrical outlet when possible; battery life is largely determined by the number of times the battery is used and recharged.• Configure the power management settings using either Dell QuickSet or Microsoft Windows Power Options to optimize your computer’s power usage (see "Configuring Power Management Settings" on page 47). • Use the Sleep power state when you leave the computer unattended for long periods of time (see "Using the Sleep Power State" on page 48).Configuring Power Management SettingsYou can use Dell QuickSet or Windows Power Options to configure the power management settings on your computer.
48 Using a Battery• For information on how to use the Dell QuickSet Power Management wizard, right-click the QuickSet icon in the notification area, click Help, and then select Power Management.• To use Windows Power Options, do one of the following:•Click Start → Control Panel→ Hardware and Sound→ Power Options, and then select a power plan in the Select a power plan window.or•Click the icon in the notification area, click Power Options, and then select a plan in the Select a power plan window.Using the Sleep Power StateRather than shutting down your portable computer, use the Sleep power state to conserve power. Sleep automatically saves your work to your hard drive, and then returns you to your previous work session without restarting your computer. NOTICE: If your computer loses AC and battery power while in Sleep state, it may lose data.To enter Sleep state:•Click Start , click , and then click Sleep.or• Depending on how you set the power management options in the Windows Power Options or Dell QuickSet, use one of the following methods:• Press the power button.• Close the display.• Press <Fn><Esc>.To exit Sleep state, press the power button.Charging the Battery NOTE: Charge time is longer with the computer turned on. You can leave the battery in the computer for as long as you like. The battery’s internal circuitry prevents the battery from overcharging.
Using a Battery 49When you connect the computer to an electrical outlet or install a battery while the computer is connected to an electrical outlet, the computer checks the battery charge and temperature. If necessary, the AC adapter then charges the battery and maintains the battery charge.If the battery is hot from being used in your computer or being in a hot environment, the battery may not charge when you connect the computer to an electrical outlet.The battery is too hot to start charging if the battery light flashes alternately blue and amber. Disconnect the computer from the electrical outlet and allow the computer and the battery to cool to room temperature, then connect the computer to an electrical outlet to continue charging the battery.For more information about resolving problems with a battery, see "Power Problems" on page 121.Replacing the Battery CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell computer. Do not use batteries from other computers with your computer. CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and the computer, and remove any other external cables from the computer. NOTICE: You must remove all external cables from the computer to avoid possible connector damage. NOTICE: If you choose to replace the battery with the computer in Sleep state, you have up to 1 minute to complete the battery replacement before the computer shuts down and loses any unsaved data.To remove the battery:1Ensure that the computer is turned off.2Turn the computer over.3Slide the battery release latch toward the side of the computer until it is engaged.
50 Using a Battery4Slide the battery out of the bay.To replace the battery, follow the removal procedure in reverse order.Storing a BatteryRemove the battery when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a long storage period, recharge the battery fully (see "Charging the Battery" on page 48) before you use it.1 battery 2 battery release latch21
Using Multimedia 51Using MultimediaPlaying Media NOTICE: Do not press down on the optical drive tray when you open or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer while playing media. NOTE: To prevent vibration and noise do not stick any additional labels or stickers on the media.1Press the eject button on the front of the drive.2Place the disc, label side up, in the center of the tray and snap the disc onto the spindle.3Push the tray back into the drive.
52 Using MultimediaTo format media for storing or copying data, see the media software that came with your computer. NOTE: Ensure that you follow all copyright laws when copying media.A CD player includes the following basic buttons:A DVD player includes the following basic buttons:For more information on playing media, click Help on the media player (if available).Play.Move backward within the current track.Pause.Move forward within the current track.Stop.Go to the previous track.Eject.Go to the next track.Stop.Restart the current chapter.Play.Fast forward.Pause.Fast reverse.Advance a single frame while in pause mode.Go to the next title or chapter.Continuously play the current title or chapter.Go to the previous title or chapter.Eject.
Using Multimedia 53Playing Media Using Dell Travel Remote (Optional)The Dell Travel Remote is designed to control Dell Media Direct and Windows Vista Media Center. It can work only with specified computers. For more details, refer to the Dell Support website at support.dell.com.To play media using Dell Travel Remote:1Install a coin-cell battery into your remote control.2Launch Windows Vista™ Media Center from Start → Programs.3Use the remote control buttons to play media.123456789141312111017151816
54 Using MultimediaCopying CD, DVD, and Blu-ray Disc™ (BD) Media NOTE: Ensure that you observe all copyright laws while copying media. NOTE: The types of optical drives offered by Dell may vary by country.This section applies only to computers that have a DVD+/-RW, Combo, or BD-RE drive.The following instructions explain how to make an exact copy of a CD, DVD or BD using Roxio Creator. You can also use Roxio Creator for other purposes, such as creating music CDs from audio files stored on your computer or backing up important data. For help, open Roxio Creator, and then press <F1>.The DVD drives and BD drives installed in Dell computers do not support HD-DVD media. For a list of supported media formats, see "Using Blank CD, DVD, and BD Media" on page 55.1Infrared Transmitter 2Arrow Up3OK/Enter/Select 4Arrow Right5Arrow Down 6Play/Pause7Forward 8Skip Forward9Stop 10 Skip Back11 Reverse 12 Back13 Arrow Left 14 Mute 15 Volume Down 16 Page Down17 Volume Up 18 Page Up
Using Multimedia 55How to Copy a CD, DVD or BD NOTE: Most commercial DVDs and BDs have copyright protection and cannot be copied using Roxio Creator Plus. NOTE: BD media can only be copied to other BD media. NOTE: Copying a BD-R to BD-RE does not produce an exact copy.1Click Start → All Programs → Roxio Creator→ Projects → Copy.2Under the Copy tab, click Copy Disc.3To copy the CD, DVD or BD:•If you have one optical drive, insert the source disc into the drive, ensure that the settings are correct, and then click the Copy Disc button to continue. The computer reads your source disc and copies the data to a temporary folder on your computer hard drive.When prompted, insert a blank disc into the drive and click OK.•If you have two optical drives, select the drive into which you have inserted your source disc and click the Copy Disc button to continue. The computer copies the data from the source disc to the blank disc.Once you have finished copying the source disc, the disc that you have created automatically ejects.Using Blank CD, DVD, and BD MediaDVD-writable drives can write to both CD and DVD recording media. BD-writable drives can write to CD, DVD and BD recording media.Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you cannot write to that CD-R again (see the Sonic documentation for more information). Use a blank CD-RW if you plan to erase, rewrite, or update information on that disc later.Blank DVD+/-R or BD-R media can be used to permanently store large amounts of information. After you create a DVD+/-R or BD-R, you may not be able to write to that disc again if the disc is finalized or closed during the final stage of the disc creation process. Use blank DVD+/-RW or BD-RE media if you plan to erase, rewrite, or update information on that disc later.
56 Using MultimediaDVD-Writable and Combo DrivesBlu-ray DrivesHelpful Tips• Use Microsoft® Windows® Explorer to drag and drop files to a CD-R or CD-RW only after you start Roxio Creator and open a Creator project.• Do not burn a blank CD-R or CD-RW to its maximum capacity; for example, do not copy a 650-MB file to a blank 650-MB CD. The CD-RW drive needs 1–2 MB of the blank space to finalize the recording. Media Type Read Write RewritableCD-R Yes Yes NoCD-RW Yes Yes YesDVD+R Yes Yes NoDVD-R Yes Yes NoDVD+RW Yes Yes YesDVD-RW Yes Yes YesDVD+R DL Yes Yes NoDVD-R DL Yes Yes NoMedia Type Read Write RewritableCD-R Yes Yes NoCD-RW Yes Yes YesDVD+R Yes Yes NoDVD-R Yes Yes NoDVD+RW Yes Yes YesDVD-RW Yes Yes YesDVD+R DL Yes Yes NoDVD-R DL Yes No NoBD-R Yes Yes NoBD-RE Yes Yes Yes
Using Multimedia 57• Use CD-Rs to burn music CDs that you want to play in regular stereos. CD-RWs do not play in most home or car stereos.• Music MP3 files can be played only on MP3 players or on computers that have MP3 software installed.• Use a blank CD-RW to practice CD recording until you are familiar with CD recording techniques. If you make a mistake, you can erase the data on the CD-RW and try again. You can also use blank CD-RWs to test music file projects before you record the project permanently to a blank CD-R.• You cannot create audio DVDs with Roxio Creator.• Commercially available DVD players used in home theater systems may not support all available DVD formats. For a list of formats supported by your DVD player, see the documentation provided with your DVD player or contact the manufacturer.• Commercially available BD players used in home theater systems may not support all available BD formats. For a list of formats supported by your BD player, see the documentation provided with your BD player or contact the manufacturer.• See the Roxio website at www.sonic.com.Adjusting the Volume NOTE: When the speakers are muted, you do not hear the media playing.1Right-click the volume icon in the notification area.2Click Open Volume Mixer.3Click and drag the bar to slide it up or down to increase or decrease the volume.For more information on volume control options, click Help in the Volume Mixer window.The Volume Meter displays the current volume level, including mute, on your computer. Either click the QuickSet icon in the notification area and select or deselect Disable On Screen Volume Meter, or press the volume control buttons to enable or disable the Volume Meter on the screen.
58 Using MultimediaAdjusting the PictureIf an error message notifies you that the current resolution and color depth are using too much memory and preventing media playback, adjust the display properties:1Click Start → Control Panel→ Appearance and Personalization.2Under Personalization, click Adjust screen resolution.3On Display Settings, click and drag the bar to reduce the resolution setting.4In the drop-down menu under Color quality, click Medium (16 bit).5Click OK.Using Dell MediaDirect™ Dell MediaDirect is an instant-on multimedia playback mode for digital media. Press the Dell MediaDirect button, located on the hinge cover, to launch Dell MediaDirect. When your computer is turned off or in Sleep state, you can press the Dell MediaDirect button to start the computer and automatically launch the Dell MediaDirect application. 1 Dell MediaDirect button1
Using Multimedia 59 NOTE: You cannot reinstall Dell MediaDirect if you voluntarily reformat the hard drive. You need the installation software to reinstall Dell MediaDirect. Contact Dell for assistance (see "Contacting Dell" on page 163). For more information on using Dell MediaDirect, use the Help menu in the Dell MediaDirect application.Connecting Your Computer to a TV or Audio Device NOTE: Video and audio cables for connecting your computer to a TV or other audio device may not be included with your computer. Cables and TV/digital audio adapter cables are available for purchase from Dell.Your computer may have an optional S-video TV-out connector and optional HDMI out connector that, together with a standard S-video cable, a composite video adapter cable, HDMI cable (available from Dell) or a component video adapter cable (available from Dell), enable you to connect the computer to a TV.Your TV has either an S-video input connector, HDMI input connector, a composite video-input connector, or a component video-input connector. Depending on what type of connector is available on your TV, you can use a commercially available S-video cable, composite video cable, HDMI cable, or component video cable to connect your computer to your TV. 1 S-video TV-out connector 2 S-video connector12
60 Using MultimediaIf you want to connect your computer to a TV or audio device, it is recommended that you connect video and audio cables to your computer in one of the following combinations:• S-video and standard audio• Composite video and standard audio• Component-out video and standard audio NOTE: See the diagrams at the beginning of each subsection to help you determine which method of connection you should use.1 S-video TV-out connector 2 composite video adapter3 S/PDIF digital audio connector 4 composite video-output connector5 S-video connector1 S-video TV-out connector 2 component video adapter3 S/PDIF digital audio connector 4 Pr (red) component video-output connector5 Pb (blue) component video-output connector6 Y (green) component video-output connector54321543126
Using Multimedia 61When you finish connecting the video and audio cables between your computer and your TV, you must enable your computer to work with the TV. See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV. Additionally, if you are using S/PDIF digital audio, see "Enabling S/PDIF Digital Audio" on page 74.S-Video and Standard Audio 1Turn off the computer and the TV and/or audio device that you want to connect.1 audio connector 2 S-video TV-out connector1 standard S-video cable 2 standard audio cable1212
62 Using Multimedia NOTE: If your TV or audio device supports S-video but not S/PDIF digital audio, you can connect an S-video cable directly to the S-video TV-out connector on the computer (without the TV/digital audio adapter cable).2Plug one end of the S-video cable into the S-video output connector on the computer.3Plug the other end of the S-video cable into the S-video input connector on your TV.4Plug the single-connector end of the audio cable into the headphone connector on your computer.5Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your TV or other audio device.6Turn on the TV and any audio device that you connected (if applicable), and then turn on the computer.7See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.S-Video and S/PDIF Digital Audio1 2
Using Multimedia 631Turn off the computer and the TV and/or the audio device that you want to connect.2Connect the composite video adapter to the S-video TV-out connector on your computer.3Plug one end of the S-video cable into the S-video output connector on the composite video adapter.4Plug the other end of the S-video cable into the S-video input connector on the TV.5Plug one end of the S/PDIF digital audio cable into the digital audio connector on the composite video adapter cable.1 S-video TV-out connector 2 composite video adapter1 composite video adapter 2 S-video cable3 S/PDIF digital audio cable1 composite video adapter 2 S-video cable12312
64 Using Multimedia6Plug the other end of the S/PDIF digital audio cable into the audio input connector on your TV or audio device.7Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.8See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.Composite Video and Standard Audio1 composite video adapter 2 S/PDIF digital audio cable1 audio input connector 2 S-video TV-out connector3 composite video adapter1 2213
Using Multimedia 651Turn off the computer and the TV and/or audio device that you want to connect.2Connect the composite video adapter to the S-video TV-out connector on your computer.3Plug one end of the composite video cable into the composite video-output connector on the composite video adapter.4Plug the other end of the composite video cable into the composite video-input connector on the TV.1 composite video adapter 2 composite video cable3 standard audio cable1 composite video adapter 2 composite video cable12321
66 Using Multimedia5Plug the single-connector end of the audio cable into the headphone connector on the computer.6Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your TV or other audio device.7Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.8See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.Composite Video and S/PDIF Digital Audio1 S-video TV-out connector 2 composite video adapter1 2
Using Multimedia 671Turn off the computer and the TV and/or audio device that you want to connect.2Connect the composite video adapter to the S-video TV-out connector on the computer.3Plug one end of the composite video cable into the composite video-input connector on the composite video adapter.4Plug the other end of the composite video cable into the composite video-input connector on the TV.5Plug one end of the S/PDIF digital audio cable into the S/PDIF audio connector on the composite video adapter.1 composite video adapter 2 composite video cable3 standard audio cable1 composite video adapter 2 composite video cable12321
68 Using Multimedia6Plug the other end of the digital audio cable into the S/PDIF input connector on your TV or other audio device.7Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.8See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.Component Video and Standard Audio1 composite video adapter 2 S/PDIF digital audio cable1 S-video TV-out connector 2 component video adapter 1 221
Using Multimedia 691Turn off the computer and the TV and/or audio device that you want to connect.2Connect the component video adapter to the S-video TV-out connector on your computer.3Plug all three ends of the component video cable into the component video-output connectors on the component video adapter. Make sure that the red, green, and blue colors of the cable match the corresponding adapter ports.1 component video adapter 2 component video cable3 standard audio cable123
70 Using Multimedia4Plug all three connectors from the other end of the component video cable into the component video-input connectors on the TV. Make sure that the red, green, and blue colors of the cable match the colors of the TV input connectors.5Plug the single-connector end of the audio cable into the headphone connector on the computer. 6Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your TV or audio device.7Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.8See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.1 component video adapter 2 component video cable21
Using Multimedia 71Component Video and S/PDIF Digital Audio1 S-video TV-out connector 2 component video adapter 1 2
72 Using Multimedia1Turn off the computer and the TV and/or audio device that you want to connect.2Connect the component video adapter to the S-video TV-out connector on the computer.3Plug all three ends of the component video cable into the component video-output connectors on the component video adapter. Make sure that the red, green, and blue colors of the cable match the corresponding adapter ports.1 component video adapter 2 component video cable3 standard audio cable123
Using Multimedia 734Plug all three connectors from the other end of the component video cable into the component video-input connectors on the TV. Make sure that the red, green, and blue colors of the cable match the colors of the TV input connectors.5Plug one end of the S/PDIF digital audio cable into the S/PDIF audio connector on the component video adapter.6Plug the other end of the digital audio cable into the S/PDIF input connector on your TV or other audio device.7Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.8See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.1 component video adapter 2 component video-output connectors3 component video cable1 component video adapter 2 S/PDIF digital audio cable31221
74 Using MultimediaEnabling S/PDIF Digital Audio1Double-click the speaker icon in the Windows notification area.2Click the Options menu and then click Advanced Controls.3Click Advanced.4Click S/PDIF Interface.5Click Close.6Click OK.HDMI (Optional)HDMI (High-Definition Multimedia Interface) connector carries an uncompressed all digital signal to produce hi-definition video and audio.1Turn off the computer and the TV and/or audio device that you want to connect.2Plug one end of the HDMI cable into the HDMI output connector on the computer.3Plug the other end of the HDMI cable into the HDMI input connector on your TV.
Using Multimedia 754Turn on the TV and any audio device that you connected (if applicable), and then turn on the computer.5See "Enabling the Display Settings for a TV" on page 75 to ensure that the computer recognizes and works properly with the TV.Enabling the Display Settings for a TV NOTE: To ensure that the display options appear correctly, connect the TV to the computer before you enable the display settings.1Click Start , click Control Panel, and then click Appearance and Personalization.2Under Personalization, click Adjust Screen Resolution.The Display Properties window appears.3Click Advanced.4Click the tab for your video card. NOTE: To determine the type of video card installed in your computer, see Windows Help and Support. To access Help and Support, click Start → Help and Support. Under Pick a Task, click Use Tools to view your computer information and diagnose problems. Then, under My Computer Information, select Hardware.
76 Using Multimedia5In the display devices section, select the appropriate option for using either a single display or multiple displays, ensuring that the display settings are correct for your selection.
Using the Optional Camera 77Using the Optional CameraIf you ordered a camera when you bought your computer, the camera is integrated in the computer display. The camera and its integrated digital microphones allow you to take photos and videos and to communicate visually and verbally with other computer users. The blue camera light appears when the camera is turned on. For more information about camera features, see "Specifications" on page 165. NOTE: It is normal for the camera to be warm when the computer is running and when the camera is in use.Accessing the Camera’s Help FileTo access the camera’s Video Software Help file, right-click the icon in the notification area and click Launch Webcam Center. Click Help from the menu and select Contents.1camera indicator 2camera 3digital microphones (2)132
78 Using the Optional CameraManually Adjusting the Camera SettingsIf you do not want the camera to use automatic settings, you can manually adjust the camera settings.1Right-click the icon in the notification area and click Launch Webcam Console.2In the Webcam Console window:•Click the Camera tab to adjust video settings, such as contrast and brightness.•Click the Effects tab to adjust audio settings, such as the volume level.For more information about camera settings and other camera-related topics, see the camera’s Video Software Help file (see "Accessing the Camera’s Help File" on page 77).Creating a Picture or a Video1Click the icon in the notification area and click Launch Webcam Center.The QuickCapture window appears and the blue camera light turns on. You can now direct the camera to point at the object or person that you want to record. The QuickCapture window on the screen shows you the camera target view.2To take a picture, click the Photo Capture tab and then click Start.
Using the Optional Camera 79To record a video, click the Video Recording tab and then click Start.The blue camera light turns on. You can now direct the camera to point at the object or person that you want to record. The screen shows you the camera target view.3To take a picture, click Capture.To record a video, click Record. Unless you designate a different location, the picture or video is automatically saved to the My Documents →Dell Webcam Center folder on your hard drive. For more information about creating pictures or videos, see the camera’s Video Software Help file (see "Accessing the Camera’s Help File" on page 77).
80 Using the Optional Camera
Template Last Updated - 2/7/2007 Using Cards 81DELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYUsing CardsExpressCardsExpressCards provide additional memory, wired and wireless communications, multimedia and security features. For example, you can add an ExpressCard to make wireless wide area network (WWAN) connectivity available on your computer.ExpressCards support two form factors:• ExpressCard/34 (34 mm wide)• ExpressCard/54 (54 mm wide in an L-shape with a 34 mm connector)The 34 mm card fits into both the 34 mm and 54 mm card slots. The 54 mm card only fits into a 54 mm card slot.See "Specifications" on page 165 for information on supported ExpressCards. NOTE: An ExpressCard is not a bootable device.1 ExpressCard/34 2 ExpressCard/5412
82 Using CardsFILE LOCATION: C:\Projects\Spears\SpearsHTML\cards.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYExpressCard BlanksYour computer shipped with a plastic blank installed in the ExpressCard slot. Blanks protect unused slots from dust and other particles. Save the blank for use when no ExpressCard is installed in the slot; blanks from other computers may not fit your computer.Remove the blank before installing an ExpressCard. To remove the blank, see "Removing an ExpressCard or Blank" on page 83.Installing an ExpressCardYou can install an ExpressCard while the computer is running. The computer automatically detects the card.ExpressCards are generally marked with a symbol (such as a triangle or an arrow) or a label to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.To install an ExpressCard:1Hold the card with the top side of the card facing up.2Slide the card into the slot until the card is completely seated in its connector. If you encounter too much resistance, do not force the card. Check the card orientation and try again.
Using Cards 83FILE LOCATION: C:\Projects\Spears\SpearsHTML\cards.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYThe computer recognizes the ExpressCard and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the media that came with the ExpressCard.Removing an ExpressCard or Blank CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.Press the card or blank to remove it from its slot.Save a blank to use when no ExpressCard is installed in a slot. Blanks protect unused slots from dust and other particles.Memory Card ReaderThe memory card reader provides a fast and convenient way to view and share digital photos, music, and videos stored on a memory card. NOTE: A memory card is not a bootable device.The 8-in-1 memory card reader reads the following memory cards:• Secure Digital (SD)•SDIO• MultiMediaCard (MMC)• Memory Stick• Memory Stick PRO• xD-Picture Card• Hi Speed-SD• Hi Density-SDMemory Card BlanksYour computer shipped with a plastic blank installed in the memory card reader. Blanks protect unused slots from dust and other particles. Save the blank for use when no media memory card is installed in the slot; blanks from other computers may not fit your computer.Remove the blank before installing a media memory card. To remove the blank, see "Removing a Memory Card or Blank" on page 85.
84 Using CardsFILE LOCATION: C:\Projects\Spears\SpearsHTML\cards.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYInstalling a Memory CardYou can install a media memory card in the computer while the computer is running. The computer automatically detects the card.Memory cards are generally marked with a symbol (such as a triangle or an arrow) or a label to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.To install a memory card:1Hold the card with the top side of the card facing up. 2Slide the card into the slot until the card is completely seated in its connector. If you encounter too much resistance, do not force the card. Check the card orientation and try again. The computer recognizes the memory card and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the media that came with the memory card, if applicable.
Using Cards 85FILE LOCATION: C:\Projects\Spears\SpearsHTML\cards.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYRemoving a Memory Card or Blank CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: Click the icon in the notification area to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card, you could lose data. Press the card into the slot to release it from the card reader. When it is partially ejected, remove the card.
86 Using CardsFILE LOCATION: C:\Projects\Spears\SpearsHTML\cards.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY
Template Last Updated - 2/7/2007 Setting Up and Using Networks 87DELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYSetting Up and Using NetworksSetting up a computer network provides connectivity between your computer and the Internet, another computer, or a network. For example, with a network set up in a home or small office you can print to a shared printer, access drives and files on another computer, browse other networks, or access the Internet. You can set up a local area network (LAN) using a network or broadband modem cable or set up a wireless LAN (WLAN). The Microsoft® Windows Vista™ operating system provides a wizard to help guide you through the process of networking computers. For more information about Networking, access Windows Help and Support (click Start , and then click Help and Support).Connecting a Network or Broadband Modem CableBefore you connect your computer to a network, the computer must have a network adapter installed and a network cable connected to it.1Connect the network cable to the network adapter connector on the back of your computer. NOTE: Insert the cable connector until it clicks into place, and then gently pull on the cable to ensure that it is securely attached.2Connect the other end of the network cable to a network connection device or a network wall connector. NOTE: Do not use a network cable with a telephone wall connector.
88 Setting Up and Using NetworksFILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYSetting Up a Network1Click Start , and then click Connect To.2Click Set up a connection or network.3Select an option under Choose a connection option.4Click Next, and then follow the instructions in the wizard.Wireless Local Area NetworkA wireless local area network (WLAN) is a series of interconnected computers that communicate with each other over the air waves rather than through a network cable connected to each computer. In a WLAN, a radio communications device called an access point or wireless router connects network computers and provides Internet, or network access. The access point or wireless router and the wireless network card in the computer communicate by broadcasting data from their antennas over the air waves.What You Need to Establish a WLAN ConnectionBefore you can set up a WLAN, you need:• High-speed (broadband) Internet access (such as cable or DSL)• A broadband modem that is connected and working• A wireless router or access point• A wireless network card for each computer that you want to connect to your WLAN
Setting Up and Using Networks 89FILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY• A network cable with a network (RJ-45) connector Checking Your Wireless Network CardDepending on what you selected when you purchased your computer, the computer has a variety of configurations. To confirm that your computer has a wireless network card and to determine the type of card:• Use the Device Manager• Check the order confirmation for your computerDevice Manager1Click Start , and then click Control Panel.2Click Classic View on the menu on the left side of the Control Panel.3Double-click Device Manager. NOTE: The User Account Control window may open.4Click Continue on the User Account Control window if it opens. 5Click the + next to Network adapters to list the utility that manages your wireless network card.If a network adapter is not listed, you may not have a wireless network card.If a network adapter is listed, you have a wireless network card. To view detailed information about the wireless network card:1Right-click the name of the network adapter.2Click Properties.The Order Confirmation for Your ComputerThe order confirmation that you received when you ordered your computer lists the hardware and software that shipped with your computer.Setting Up a New WLAN Using a Wireless Router and a Broadband Modem1Contact your Internet service provider (ISP) to obtain specific information about the connection requirements for your broadband modem.
90 Setting Up and Using NetworksFILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY2Ensure that you have wired Internet access through your broadband modem before you attempt to set up a wireless Internet connection (see "Connecting a Network or Broadband Modem Cable" on page 87).3Install any software required for your wireless router. Your wireless router may have been shipped with installation media. Installation media usually contains installation and troubleshooting information. Install the required software according to the instructions provided by the router manufacturer. 4Shut down your computer and any other wireless-enabled computers in the vicinity through the Windows Vista Start button .5Disconnect your broadband modem power cable from the electrical outlet.6Disconnect the network cable from the computer and the modem.7Disconnect the AC adapter cable from your wireless router to ensure that there is no power connected to the router. NOTE: Wait for a minimum of 5 minutes after disconnecting your broadband modem before continuing with the network setup.8Insert a network cable into the network (RJ-45) connector on the unpowered broadband modem.9Connect the other end of the network cable into the Internet network (RJ-45) connector on the unpowered wireless router.10Ensure that no network or USB cables, other than the network cable connecting the modem and the wireless router, are connected to the broadband modem. NOTE: Restart your wireless equipment in the order described below to prevent a potential connection failure.11Tu rn o n only your broadband modem and wait for at least 2 minutes for the broadband modem to stabilize. After 2 minutes, proceed to step 12.12Turn on your wireless router and wait for at least 2 minutes for the wireless router to stabilize. After 2 minutes, proceed to the step 13.13Start your computer and wait until the boot process completes.14See the documentation that came with your wireless router to do the following in order to set up the wireless router:• Establish communication between your computer and your wireless router.
Setting Up and Using Networks 91FILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY• Configure your wireless router to communicate with your broadband router.• Find out your wireless router’s broadcast name. The technical term for the name of your router’s broadcast name is Service Set Identifier (SSID) or network name.15If necessary, configure your wireless network card to connect to the wireless network (see "Connecting to a WLAN" on page 91).Connecting to a WLAN NOTE: Before you connect to a WLAN, ensure that you have followed the instructions in "Wireless Local Area Network" on page 88. NOTE: The following networking instructions do not apply to internal cards with Bluetooth® wireless technology or cellular products.This section provides general procedures for connecting to a network using wireless technology. Specific network names and configuration details vary. See "Wireless Local Area Network" on page 88 for more information about how to prepare for connecting your computer to a WLAN. Your wireless network card requires specific software and drivers for connecting to a network. The software is already installed. NOTE: If the software is removed or corrupted, follow the instructions in the user documentation for your wireless network card. Verify the type of wireless network card installed in your computer and then search for that name on the Dell™ Support website at support.dell.com. For information on the type of wireless network card that is installed in your computer, see "Checking Your Wireless Network Card" on page 89.When you turn on your computer and a network (for which your computer is not configured) is detected in the area, a pop-up appears near the network icon in the Windows notification area. To connect to the network:1Click Start , and then click Network.2Click Network and Sharing on the navigation bar at the top of the Network folder.3Click Connect to a network under Tas k s.4Select your network from the list and click Connect.
92 Setting Up and Using NetworksFILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYOnce you have configured your computer for a wireless network, another pop-up notifies you that your computer is connected to that network.Thereafter, whenever you log on to your computer within the range of the wireless network that you selected, the same pop-up notifies you of the wireless network connection. NOTE: If you select a secure network, you must enter a WEP or WPA key when prompted. Network security settings are unique to your network. Dell cannot provide this information. NOTE: Your computer can take up to 1 minute to connect to the network. Monitoring the Status of the Wireless Network Card Through Dell QuickSetThe wireless activity indicator provides you with an easy way to monitor the status of your computer’s wireless devices. To turn the wireless activity indicator on or off, click the QuickSet icon in the taskbar and select Hotkey Popups. If Wireless Activity Indicator Off is not checked, the indicator is on. If Wireless Activity Indicator Off is checked, the indicator is off.The wireless activity indicator displays whether your computer’s integrated wireless devices are enabled or disabled. When you turn the wireless networking function on or off, the wireless activity indicator changes to display the status. For more information about the Dell QuickSet wireless activity indicator, right-click the QuickSet icon in the taskbar, and then select Help.Mobile Broadband (or Wireless Wide Area Network)A Mobile Broadband network, also known as a Wireless Wide Area Network (WWAN), is a high-speed digital cellular network that provides Internet access over a much wider geographical area than a WLAN, which typically covers only from 100 to 1000 feet. Your computer can maintain Mobile Broadband network access as long as the computer is within a cellular-data coverage zone. Contact your service provider for coverage of a high-speed digital cellular network. NOTE: Even if you are able to make a call from your cellular phone in a specific geographical location, that location may not necessarily be within a cellular-data coverage zone.
Setting Up and Using Networks 93FILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYWhat You Need to Establish a Mobile Broadband Network Connection NOTE: Depending on your computer, you can use either a Mobile Broadband ExpressCard or Mini-Card, but not both, to establish a Mobile Broadband network connection.To set up a Mobile Broadband network connection, you need: • A Mobile Broadband ExpressCard or Mini Card (depending on your computer’s configuration) NOTE: For instructions on using ExpressCards, see "Using Cards" on page 81.• An activated Mobile Broadband ExpressCard or activated Subscriber Identity Module (SIM) for your service provider• The Dell Mobile Broadband Card Utility (already installed on your computer if you purchased the card when you purchased your computer, or on the media that accompanied your card if purchased separately from your computer)If the utility is corrupted or deleted from your computer, see the Dell Mobile Broadband Card Utility user’s guide in Windows Help and Support (click Start , and then click Help and Support) or on the media that accompanied your card if you purchased it separately from your computer.Checking Your Dell Mobile Broadband CardDepending on what you selected when you purchased your computer, the computer has a variety of configurations. To determine your computer configuration, see one of the following:• Your order confirmation• Microsoft Windows Help and Support To check your Mobile Broadband card in Windows Help and Support:1Click Start → Help and Support→ Use Tools to view your computer information and diagnose problems.2Under Tools, click My Computer Information→ Find information about the hardware installed on this computer.On the My Computer Information - Hardware screen, you can view the type of Mobile Broadband card installed in your computer as well as other hardware components.
94 Setting Up and Using NetworksFILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY NOTE: The Mobile Broadband card is listed under Modems.Connecting to a Mobile Broadband Network NOTE: These instructions only apply to Mobile Broadband ExpressCards or Mini-Cards. They do not apply to internal cards with wireless technology. NOTE: Before you connect to the Internet, you must activate Mobile Broadband service through your cellular service provider. For instructions and for additional information about using the Dell Mobile Broadband Card Utility, see the user's guide available through Windows Help and Support (click Start , and then click Help and Support). The user's guide is also available on the Dell Support website at support.dell.com and on the media included with your Mobile Broadband card if you purchased the card separately from your computer.Use the Dell Mobile Broadband Card Utility to establish and manage a Mobile Broadband network connection to the Internet:1Click the Dell Mobile Broadband Card Utility icon in the Windows notification area to run the utility.2Click Connect. NOTE: The Connect button changes to the Disconnect button. 3Follow the instructions on the screen to manage the network connection with the utility.or1Click Start → All Programs→ Dell Wireless.2Click Dell Wireless Broadband and follow the instructions on the screen.Enabling/Disabling the Dell Mobile Broadband Card NOTE: If you are unable to connect to a Mobile Broadband network, ensure that you have all the components for establishing a Mobile Broadband connection (see "What You Need to Establish a Mobile Broadband Network Connection" on page 93), and then verify that your Mobile Broadband card is enabled by verifying the setting of the wireless switch.You can turn your Mobile Broadband card on and off using the wireless switch on your computer. You can turn your computer’s wireless devices on and off with the wireless switch on the left side of the computer (see "Left Side View" on page 25).
Setting Up and Using Networks 95FILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYIf the switch is in the on position, move the switch to the off position to disable the switch and the Mobile Broadband card. If the switch is in the off position, move the switch to the on position to enable the switch and the Dell Mobile Broadband card. For information about the wireless switch positions, see "" on page 29.To monitor the status of your wireless device, see "Monitoring the Status of the Wireless Network Card Through Dell QuickSet" on page 92.Dell Wi-Fi Catcher™ Network LocatorThe wireless switch on your Dell computer uses the Dell Wi-Fi Catcher Network Locator to scan specifically for wireless networks in your vicinity. To scan for a wireless network, slide and hold the wireless switch (see "wireless switch" on page 27) in the momentary position for a few seconds. The Wi-Fi Catcher Network Locator functions regardless of whether your computer is turned on or off, or in Sleep state, as long as the switch is configured through Dell QuickSet or the BIOS (system setup program) to control WiFi network connections. The Wi-Fi Catcher Network Locator is enabled and configured for use when your computer is shipped to you. For more information on the Wi-Fi Catcher Network Locator and to enable or disable the feature through Dell QuickSet, right-click the QuickSet icon in the notification area, and then select Help.
96 Setting Up and Using NetworksFILE LOCATION: C:\Projects\Spears\SpearsHTML\wireless.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY
Template Last Updated - 2/7/2007 Securing Your Computer 97DELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYSecuring Your ComputerSecurity Cable Lock NOTE: Your computer does not ship with a security cable lock.A security cable lock is a commercially available antitheft device. To use the lock, attach it to the security cable slot on your Dell computer. For more information, see the instructions included with the device. NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot on your computer.PasswordsPasswords prevent unauthorized access to your computer. When you first start your computer, you must assign a primary password at the prompt. If you do not enter a password within 2 minutes, the computer returns to its previous operating state.When using passwords, observe the following guidelines:
98 Securing Your ComputerFILE LOCATION: C:\Projects\Spears\SpearsHTML\security.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY• Choose a password that you can remember, but not one that is easy to guess. For example, do not use the names of family members or pets for passwords.• It is recommended that you do not write down your password. If you do write it down, however, ensure that the password is stored in a secure location.• Do not share your password with other people.• Ensure that people are not watching you when you type your password. NOTICE: Passwords provide a high level of security for data in your computer or hard drive. However, they are not foolproof. If you require more security, obtain and use additional forms of protection such as data encryption programs. Use the User Accounts option in the Control Panel in the Microsoft® Windows® operating system to create user accounts or to change passwords. Once you create a user password, you must enter it each time you turn on or unlock your computer. If you do not enter a password within 2 minutes, the computer returns to its previous operating state. For more information, see your Windows documentation.If you forget any of your hardware passwords, such as the hard drive and BIOS passwords, contact Dell (see "Contacting Dell" on page 163). For your protection, Dell technical support staff will ask you for proof of your identity to ensure that only an authorized person can use the computer.If Your Computer Is Lost or Stolen• Call a law enforcement agency to report the lost or stolen computer. Include the Service Tag in your description of the computer. Ask that a case number be assigned and write down the number, along with the name, address, and phone number of the law enforcement agency. If possible, obtain the name of the investigating officer. NOTE: If you know where the computer was lost or stolen, call a law enforcement agency in that area. If you do not know, call a law enforcement agency where you live.• If the computer belongs to a company, notify the security office of the company.
Securing Your Computer 99FILE LOCATION: C:\Projects\Spears\SpearsHTML\security.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY• Contact Dell customer service to report the missing computer. Provide the computer Service Tag, the case number, and the name, address, and phone number of the law enforcement agency to which you reported the missing computer. If possible, give the name of the investigating officer.The Dell customer service representative will log your report under the computer Service Tag and record the computer as missing or stolen. If someone calls Dell for technical assistance and gives your Service Tag, the computer is identified automatically as missing or stolen. The representative will attempt to get the phone number and address of the caller. Dell will then contact the law enforcement agency to which you reported the missing computer.
100 Securing Your ComputerFILE LOCATION: C:\Projects\Spears\SpearsHTML\security.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY
Troubleshooting 101TroubleshootingDell Technical Update ServiceThe Dell Technical Update service provides proactive e-mail notification of software and hardware updates for your computer. The service is free and can be customized for content, format, and how frequently you receive notifications.To enroll for the Dell Technical Update service, go to support.dell.com/technicalupdate.Dell Diagnostics CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.When to Use the Dell DiagnosticsIf you experience a problem with your computer, perform the checks in "Lockups and Software Problems" on page 117 and run the Dell Diagnostics before you contact Dell for technical assistance.It is recommended that you print these procedures before you begin. NOTE: The Dell Diagnostics only operate on Dell computers.Enter system setup, review your computer’s configuration information, and ensure that the device you want to test displays in system setup and is active (see "Using the System Setup Program" on page 175).Start the Dell Diagnostics from your hard drive or from your Drivers and Utilities media (see "Drivers and Utilities Media" on page 13).Starting the Dell Diagnostics From Your Hard DriveThe Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive. NOTE: If your computer cannot display a screen image, contact Dell (see "Contacting Dell" on page 163).
102 Troubleshooting NOTE: If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.1Ensure that the computer is connected to an electrical outlet that is known to be working properly.2Turn on (or restart) your computer.3Start the Dell Diagnostics in one of the following two ways:aWhen the DELL™ logo appears, press <F12> immediately. Select Diagnostics from the boot menu, and then press <Enter>. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then shut down your computer and try again. NOTE: Before attempting option B, the computer must be powered down completely.bPress and hold the <Fn> key while powering the computer on. NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from your Drivers and Utilities media.The computer runs the Pre-boot System Assessment, a series of initial tests of your system board, keyboard, hard drive, and display.• During the assessment, answer any questions that appear.• If a failure is detected, the computer stops and beeps. To stop the assessment and restart the computer, press <n>; to continue to the next test, press <y>; to retest the component that failed, press <r>. • If failures are detected during the Pre-boot System Assessment, write down the error code(s) and contact Dell.If the Pre-boot System Assessment completes successfully, you receive the message Booting Dell Diagnostic Utility Partition. Press any key to continue.4Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.Starting the Dell Diagnostics From the Drivers and Utilities Media1Insert your Drivers and Utilities media.2Shut down and restart the computer.
Troubleshooting 1033When the DELL logo appears, press <F12> immediately. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release <F12> in even intervals until the boot device menu appears.4At the boot device menu, use the up- and down-arrow keys to highlight CD/DVD/CD-RW, and then press <Enter>. NOTE: The Quickboot feature changes the boot sequence for the current boot only. Upon restart, the computer boots according to the boot sequence specified in system setup.5Select the Boot from CD-ROM option from the menu that appears, and then press <Enter>.6Ty p e 1 to start the Drivers and Utilities menu, and then press <Enter>.7Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.8At the Dell Diagnostics Main Menu, select the test you want to run. NOTE: Write down any error codes and problem descriptions exactly as they appear and follow the instructions on the screen.9After all tests have completed, close the test window to return to the Dell Diagnostics Main Menu.10Remove your Drivers and Utilities media, then close the Main Menu window to exit the Dell Diagnostics and restart the computer.Dell Diagnostics Main MenuAfter the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want. NOTE: It is recommended that you select Test System to run a complete test on your computer.Option FunctionTest Memory Run the stand-alone memory testTest System Run System DiagnosticsExit Exit Diagnostics
104 TroubleshootingAfter you have selected the Test System option from the main menu, the following menu appears. NOTE: It is recommended that you select Extended Test from the menu below to run a more thorough check of the devices in the computer.For any problem encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and problem description exactly as it appears and follow the instructions on the screen. If you cannot resolve the problem, contact Dell (see "Contacting Dell" on page 163). NOTE: The Service Tag for your computer is located at the top of each test screen. When contacting Dell support, have your Service Tag ready.The following tabs provide additional information for tests run from the Custom Test or Symptom Tree option:Option FunctionExpress Test Performs a quick test of system devices. The test typically takes 10 to 20 minutes and requires no interaction on your part. Run Express Test first to increase the possibility of tracing the problem quickly.Extended Test Performs a thorough check of system devices. The test typically takes an hour or more and periodically requires your input to answer specific questions.Custom Test Tests a specific device in the system and can be used to customize the tests you want to run.Symptom Tree Lists a number of common symptoms and allows you to select a test based on the symptom of the problem you are having.Tab FunctionResults Displays the results of the test and any error conditions encountered.Errors Displays error conditions encountered, error codes, and the problem description.
Troubleshooting 105Dell Support UtilityThe Dell Support Utility is customized for your computing environment. This utility provides self-support information, software updates, and health scans for your computer. Use this utility to do the following:• Check your computing environment • View the Dell Support Utility settings• Access the help file for the Dell Support Utility• View frequently asked questions• Learn more about the Dell Support Utility• Turn the Dell Support Utility offFor more information about the Dell Support Utility, click the question mark (?) at the top of the Dell Support window.To access the Dell Support Utility:• Click the Dell Support icon in the notification area. NOTE: The icon functions vary when clicking, double-clicking, or right-clicking.orHelp Describes the test and any requirements for running the test.Configuration Displays your hardware configuration for the selected device.The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on your computer or all devices attached to your computer.Parameters Allows you to customize the test by changing the test settings.Tab Function (continued)
106 Troubleshooting• Click the Start → All Programs→ Dell Support→ Dell Support Settings. Ensure that the Show icon on the taskbar option is checked. NOTE: If the Dell Support Utility is not available from the Start menu, go to support.dell.com and download the software. Drive Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.Fill out the "Diagnostics Checklist" on page 162 as you complete these checks.ENSURE THAT MICROSOFT® WINDOWS® RECOGNIZES THE DRIVE —• Click Start → Computer.If the drive is not listed, perform a full scan with your antivirus software to check for and remove viruses. Viruses can sometimes prevent Windows from recognizing the drive.TEST THE DRIVE —• Insert another floppy disk, CD, DVD, or BD to eliminate the possibility that the original media is defective.• Insert a bootable floppy disk and restart the computer.CLEAN THE DRIVE OR DISK —See "Cleaning Your Computer" on page 178.ENSURE THAT THE CD, DVD, OR BD MEDIA IS SNAPPED ONTO THE SPINDLECHECK THE CABLE CONNECTIONSCHECK FOR HARDWARE INCOMPATIBILITIES —See "Troubleshooting Software and Hardware Problems" on page 131.RUN THE DELL DIAGNOSTICS —See "Dell Diagnostics" on page 101.Optical drive problems NOTE: High-speed optical drive vibration is normal and may cause noise, which does not indicate a defect in the drive or the media. NOTE: Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives.
Troubleshooting 107Problems writing to a CD-RW, DVD+/-RW, or BD-RE driveCLOSE OTHER PROGRAMS —CD-RW, DVD+/-RW, and BD-RE drives must receive a steady stream of data when writing. If the stream is interrupted, an error occurs. Try closing all programs before you write to the drive.TURN OFF SLEEP STATE IN WINDOWS BEFORE WRITING TO A CD/DVD/BD DISC —See "Using the Sleep Power State" on page 48 for information on Sleep state.CHANGE THE WRITE SPEED TO A SLOWER RATE —See the help files for your CD, DVD, or BD creation software.The drive tray cannot eject1Ensure that the computer is shut down.2Straighten a paper clip and insert one end into the eject hole at the front of the drive, then push firmly until the tray is partially ejected.3Gently pull out the tray until it stops.The drive makes an unfamiliar scraping or grinding sound• Ensure that the sound is not caused by the program that is running.• Ensure that the disc is inserted properly.Hard drive problemsALLOW THE COMPUTER TO COOL BEFORE TURNING IT ON —A hot hard drive may prevent the operating system from starting. Try allowing the computer to return to room temperature before turning it on.RUN CHECK DISK —1Click Start → Computer.2Right-click Local Disk (C:).3Click Properties→ Tools→ Check Now. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action.4Click to check Scan for and attempt recovery of bad sectors, and then click Start.
108 TroubleshootingE-Mail, Modem, and Internet Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: Connect the modem to an analog telephone jack only. The modem does not operate while it is connected to a digital telephone network.CHECK THE MICROSOFT OUTLOOK® EXPRESS SECURITY SETTINGS —If you cannot open your e-mail attachments:1In Outlook Express, click Tools, click Options, and then click Security.2Click Do not allow attachments to remove the checkmark.CHECK THE TELEPHONE LINE CONNECTIONCHECK THE TELEPHONE JACKCONNECT THE MODEM DIRECTLY TO THE TELEPHONE WALL JACKUSE A DIFFERENT TELEPHONE LINE• Verify that the telephone line is connected to the jack on the modem (the jack has either a green label or a connector-shaped icon next to it). • Ensure that you hear a click when you insert the telephone line connector into the modem. • Disconnect the telephone line from the modem and connect it to a telephone, then listen for a dial tone. • If you have other telephone devices sharing the line, such as an answering machine, fax machine, surge protector, or line splitter, then bypass them and connect the modem directly to the telephone wall jack. If you are using a line that is 3 m (10 ft) or more in length, try a shorter one.RUN THE MODEM DIAGNOSTIC UTILITY —Click the Start → Programs→ Modem Diagnostic Tool→ Modem Diagnostic Utility. Follow the instructions on the screen to identify and resolve modem problems (Modem Diagnostic Utility is not available on certain computers).VERIFY THAT THE MODEM IS COMMUNICATING WITH WINDOWS —1Click the Start , and then click Control Panel.2Click Hardware and Sound.3Click Phone and Modem Options.4Click the Modems tab.
Troubleshooting 1095Click the COM port for your modem.6Click Properties, click the Diagnostics tab, and then click Query Modem to verify that the modem is communicating with Windows.If all commands receive responses, the modem is operating properly.ENSURE THAT YOU ARE CONNECTED TO THE INTERNET —Ensure that you have subscribed to an Internet service provider. With the Outlook Express e-mail program open, click File. If Work Offline has a checkmark next to it, click the checkmark to remove it, and then connect to the Internet. For help, contact your Internet service provider.SCAN THE COMPUTER FOR SPYWARE —If you are experiencing slow computer performance, you frequently receive pop-up advertisements, or you are having problems connecting to the Internet, your computer might be infected with spyware. Use an anti-virus program that includes anti-spyware protection (your program may require an upgrade) to scan the computer and remove spyware. For more information, go to support.dell.com and search for the keyword spyware.Error MessagesFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.If the message is not listed, see the documentation for the operating system or the program that was running when the message appeared.AUXILIARY DEVICE FAILURE —The touch pad or external mouse may be faulty. For an external mouse, check the cable connection. Enable the Pointing Device option in the system setup program (see "Using the System Setup Program" on page 175). If the problem persists, contact Dell (see "Contacting Dell" on page 163).BAD COMMAND OR FILE NAME —Ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct pathname.CACHE DISABLED DUE TO FAILURE —The primary cache internal to the microprocessor has failed. Contact Dell (see "Contacting Dell" on page 163).
110 TroubleshootingCD DRIVE CONTROLLER FAILURE —The CD drive does not respond to commands from the computer (see "Drive Problems" on page 106).DATA ERROR —The hard drive cannot read the data (see "Drive Problems" on page 106).DECREASING AVAILABLE MEMORY —One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144).DISK C: FAILED INITIALIZATION —The hard drive failed initialization. Run the hard drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101). DRIVE NOT READY —The operation requires a hard drive in the bay before it can continue. Install a hard drive in the hard drive bay (see "Hard Drive" on page 137). ERROR READING PCMCIA CARD —The computer cannot identify the ExpressCard. Reinsert the card or try another card (see "Using Cards" on page 81). EXTENDED MEMORY SIZE HAS CHANGED —The amount of memory recorded in NVRAM does not match the memory installed in the computer. Restart the computer. If the error appears again, contact Dell (see "Contacting Dell" on page 163).THE FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION DRIVE —The file that you are trying to copy is too large to fit on the disk, or the disk is full. Try copying the file to a different disk or use a larger capacity disk.A FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING CHARACTERS: \ / : * ? “ < > | — Do not use these characters in filenames.GATE A20 FAILURE —A memory module may be loose. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144). GENERAL FAILURE —The operating system is unable to carry out the command. The message is usually followed by specific information—for example, Printer out of paper. Take the appropriate action.HARD-DISK DRIVE CONFIGURATION ERROR —The computer cannot identify the drive type. Shut down the computer, remove the hard drive (see "Hard Drive" on page 137), and boot the computer from a CD. Then, shut down the computer, reinstall the hard drive, and restart the computer. Run the Hard Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101).
Troubleshooting 111HARD-DISK DRIVE CONTROLLER FAILURE 0—The hard drive does not respond to commands from the computer. Shut down the computer, remove the hard drive (see "Hard Drive" on page 137), and boot the computer from a CD. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101).HARD-DISK DRIVE FAILURE —The hard drive does not respond to commands from the computer. Shut down the computer, remove the hard drive (see "Hard Drive" on page 137), and boot the computer from a CD. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101). HARD-DISK DRIVE READ FAILURE —The hard drive may be defective. Shut down the computer, remove the hard drive (see "Hard Drive" on page 137), and boot the computer from a CD. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101).INSERT BOOTABLE MEDIA —The operating system is trying to boot to nonbootable media, such as a floppy disk or CD. Insert bootable media.INVALID CONFIGURATION INFORMATION-PLEASE RUN SYSTEM SETUP PROGRAM —The system configuration information does not match the hardware configuration. The message is most likely to occur after a memory module is installed. Correct the appropriate options in the system setup program (see "Using the System Setup Program" on page 175).KEYBOARD CLOCK LINE FAILURE —For external keyboards, check the cable connection. Run the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 101).KEYBOARD CONTROLLER FAILURE —For external keyboards, check the cable connection. Restart the computer, and avoid touching the keyboard or the mouse during the boot routine. Run the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 101).KEYBOARD DATA LINE FAILURE —For external keyboards, check the cable connection. Run the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 101).
112 TroubleshootingKEYBOARD STUCK KEY FAILURE —For external keyboards or keypads, check the cable connection. Restart the computer, and avoid touching the keyboard or keys during the boot routine. Run the Stuck Key test in the Dell Diagnostics (see "Dell Diagnostics" on page 101).LICENSED CONTENT IS NOT ACCESSIBLE IN MEDIADIRECT —Dell MediaDirect™ cannot verify the Digital Rights Management (DRM) restrictions on the file, so the file cannot be played (see "Dell MediaDirect problems" on page 118).MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE —A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144).MEMORY ALLOCATION ERROR —The software you are attempting to run is conflicting with the operating system, another program, or a utility. Shut down the computer, wait 30 seconds, and then restart it. Try to run the program again. If the error message still appears, see the software documentation.MEMORY DATA LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE —A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144).MEMORY DOUBLE WORD LOGIC FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE —A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144).MEMORY ODD/EVEN LOGIC FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE —A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144).MEMORY WRITE/READ FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE —A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory" on page 144).NO BOOT DEVICE AVAILABLE —The computer cannot find the hard drive. If the hard drive is your boot device, ensure that the drive is installed, properly seated, and partitioned as a boot device.NO BOOT SECTOR ON HARD DRIVE —The operating system may be corrupted. Contact Dell (see "Contacting Dell" on page 163).
Troubleshooting 113NO TIMER TICK INTERRUPT —A chip on the system board may be malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101). NOT ENOUGH MEMORY OR RESOURCES. EXIT SOME PROGRAMS AND TRY AGAIN —You have too many programs open. Close all windows and open the program that you want to use.OPERATING SYSTEM NOT FOUND —Reinstall the hard drive (see "Hard Drive" on page 137). If the problem persists, contact Dell (see "Contacting Dell" on page 163). OPTIONAL ROM BAD CHECKSUM —The optional ROM has failed. Contact Dell (see "Contacting Dell" on page 163).A REQUIRED .DLL FILE WAS NOT FOUND —The program that you are trying to open is missing an essential file. Remove and then reinstall the program.1Click Start → Control Panel.2Under Programs, click Uninstall a Program.3Select the program you want to remove.4Click Uninstall and follow the prompts on the screen.5See the program documentation for installation instructions.SECTOR NOT FOUND —The operating system cannot locate a sector on the hard drive. You may have a defective sector or corrupted FAT on the hard drive. Run the Windows error-checking utility to check the file structure on the hard drive. See Windows Help and Support for instructions (click Start → Help and Support). If a large number of sectors are defective, back up the data (if possible), and then reformat the hard drive.SEEK ERROR —The operating system cannot find a specific track on the hard drive. SHUTDOWN FAILURE —A chip on the system board may be malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101).TIME-OF-DAY CLOCK LOST POWER —System configuration settings are corrupted. Connect your computer to an electrical outlet to charge the battery. If the problem persists, try to restore the data by entering the system setup program, then immediately exit the program (see "Using the System Setup Program" on page 175). If the message reappears, contact Dell (see "Contacting Dell" on page 163).
114 TroubleshootingTIME-OF-DAY CLOCK STOPPED —The reserve battery that supports the system configuration settings may require recharging. Connect your computer to an electrical outlet to charge the battery. If the problem persists, contact Dell (see "Contacting Dell" on page 163).TIME-OF-DAY NOT SET-PLEASE RUN THE SYS TEM SETUP PROGRAM —The time or date stored in the system setup program does not match the system clock. Correct the settings for the Date and Time options (see "Using the System Setup Program" on page 175).TIMER CHIP COUNTER 2 FAILED —A chip on the system board may be malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101).UNEXPECTED INTERRUPT IN PROTECTED MODE —The keyboard controller may be malfunctioning, or a memory module may be loose. Run the System Memory tests and the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 101).X:\ IS NOT ACCESSIBLE. THE DEVICE IS NOT READY —Insert a disk into the drive and try again.WARNING: BATTERY IS CRITICALLY LOW —The battery is running out of charge. Replace the battery, or connect the computer to an electrical outlet; otherwise, activate hibernate mode or shut down the computer.ExpressCard Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.CHECK THE EXPRESSCARD —Ensure that the ExpressCard is properly inserted into the connector.CHECK THAT THE CARD IS RECOGNIZED BY WINDOWS —Double-click the Safely Remove Hardware icon in the Windows taskbar. Some cards do not support this feature. If the card supports this Windows feature, the card will be listed.IF YOU HAVE PROBLEMS WITH A DELL-PROVIDED EXPRESSCARD —Contact Dell (see "Contacting Dell" on page 163). Also, for Mobile Broadband (WWAN) ExpressCards, see "Mobile Broadband (Wireless Wide Area Network [WWAN])" on page 120.IF YOU HAVE PROBLEMS WITH AN EXPRESSCARD NOT PROVIDED BY DELL —Contact the ExpressCard manufacturer.
Troubleshooting 115IEEE 1394 Device Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.ENSURE THAT THE IEEE 1394 DEVICE IS RECOGNIZED BY WINDOWS —1Click Start → Control Panel→ System and Maintenance→ Device Manager. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action.If your IEEE 1394 device is listed, Windows recognizes the device.IF YOU HAVE PROBLEMS WITH A DELL-PROVIDED IEEE 1394 DEVICE —Contact Dell or the IEEE 1394 device manufacturer (see "Contacting Dell" on page 163). IF YOU HAVE PROBLEMS WITH AN IEEE 1394 DEVICE NOT PROVIDED BY DELL —Contact Dell or the IEEE 1394 device manufacturer (see "Contacting Dell" on page 163). Ensure that the IEEE 1394 device is properly inserted into the connector.Keyboard Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.Fill out the "Diagnostics Checklist" on page 162 as you perform the various checks. NOTE: Use the integrated keyboard when running the Dell Diagnostics or the system setup program. When you attach an external keyboard, the integrated keyboard remains fully functional.External Keyboard problems NOTE: When you attach an external keyboard, the integrated keyboard remains fully functional.CHECK THE KEYBOARD CABLE —Shut down the computer, disconnect the keyboard cable and check it for damage, then firmly reconnect the cable.If you are using a keyboard extension cable, disconnect it and connect the keyboard directly to the computer.
116 TroubleshootingCHECK THE EXTERNAL KEYBOARD —1Shut down the computer, wait 1 minute, and then turn it on again.2Verify that the numbers, capitals, and scroll lock lights on the keyboard blink during the boot routine.3From the Windows desktop, click Start → All Programs→ Accessories→ Notepad. 4Type some characters on the external keyboard and verify that they appear on the display.If you cannot verify these steps, you may have a defective external keyboard. TO VERIFY THAT THE PROBLEM IS WITH THE EXTERNAL KEYBOARD, CHECK THE INTEGRATED KEYBOARD —1Shut down the computer.2Disconnect the external keyboard.3Turn on the computer. 4From the Windows desktop, click Start → All Programs→ Accessories→ Notepad. 5Type some characters on the internal keyboard and verify that they appear on the display.If the characters appear now, but did not with the external keyboard, you may have a defective external keyboard. Contact Dell (see "Contacting Dell" on page 163).RUN THE KEYBOARD DIAGNOSTICS TESTS —Run the PC-AT Compatible Keyboards tests in the Dell Diagnostics (see "Dell Diagnostics" on page 101). If the tests indicate a defective external keyboard, contact Dell (see "Contacting Dell" on page 163).Unexpected charactersDISABLE THE NUMERIC KEYPAD —Press <Num Lk> to disable the numeric keypad if numbers are displayed instead of letters. Verify that the numbers lock light is not lit.
Troubleshooting 117Lockups and Software Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.The computer does not startCHECK THE AC ADAPTER —Ensure that the AC adapter is firmly connected to the computer and to the electrical outlet.The computer stops responding NOTICE: You might lose data if you are unable to perform an operating system shutdown.TURN THE COMPUTER OFF —If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off, then restart your computer. A program stops responding or crashes repeatedlyEND THE PROGRAM —1Press <Crtl><Shift><Esc> simultaneously.2Click the Applications tab and select the program that is no longer responding.3Click End Task. NOTE: The chkdsk program may run when you restart the computer. Follow the instructions on the screen. CHECK THE SOFTWARE DOCUMENTATION —If necessary, uninstall and then reinstall the program. Software usually includes installation instructions in its documentation or on a floppy disk or CD.A program is designed for an earlier Microsoft® Windows® operating systemRUN THE PROGRAM COMPATIBILITY WIZARD —Program compatibility is a mode in Windows that lets you run programs written for earlier versions of Windows. For more information, search for the keyword program compatibility wizard in Windows Help and Support.
118 TroubleshootingA solid blue screen appearsTURN THE COMPUTER OFF —If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off, then restart your computer. Dell MediaDirect problemsCHECK THE DELL MEDIADIRECT HELP FILE FOR INFORMATION —Use the Help menu to access Dell MediaDirect Help. TO PLAY MOVIES WITH DELL MEDIADIRECT, YOU MUST HAVE A DVD DRIVE AND THE DELL DVD PLAYER —If you purchased a DVD drive with your computer, this software should already be installed. VIDEO QUALITY PROBLEMS —Turn off the Use Hardware Acceleration option. This feature takes advantage of the special processing in some graphics cards to reduce processor requirements when playing DVDs and certain types of video files. CANNOT PLAY SOME MEDIA FILES —Because Dell MediaDirect provides access to media files outside the Windows operating system environment, access to licensed content is restricted. Licensed content is digital content that has Digital Rights Management (DRM) applied to it. The Dell MediaDirect environment cannot verify the DRM restrictions, so the licensed files cannot be played. Licensed music and video files have a lock icon next to them. You can access licensed files in the Windows operating system environment. ADJUSTING THE COLOR SETTINGS FOR MOVIES THAT CONTAIN SCENES THAT ARE TOO DARK OR TOO BRIGHT —Click EagleVision to use a video enhancement technology that detects video content and dynamically adjusts the brightness/contrast/saturation ratios. NOTICE: You cannot reinstall the Dell MediaDirect feature if you voluntarily reformat the hard drive. Contact Dell for assistance (see "Contacting Dell" on page 163). Other software problemsCHECK THE SOFTWARE DOCUMENTATION OR CONTACT THE SOFTWARE MANUFACTURER FOR TROUBLESHOOTING INFORMATION —• Ensure that the program is compatible with the operating system installed on your computer.
Troubleshooting 119• Ensure that your computer meets the minimum hardware requirements needed to run the software. See the software documentation for information.• Ensure that the program is installed and configured properly.• Verify that the device drivers do not conflict with the program.• If necessary, uninstall and then reinstall the program.BACK UP YOUR FILES IMMEDIATELYUSE A VIRUS-SCANNING PROGRAM TO CHECK THE HARD DRIVE, FLOPPY DISKS, OR CDSSAVE AND CLOSE ANY OPEN FILES OR PROGRAMS AND SHUT DOWN YOUR COMPUTER THROUGH THE START MENUSCAN THE COMPUTER FOR SPYWARE —If you are experiencing slow computer performance, you frequently receive pop-up advertisements, or you are having problems connecting to the Internet, your computer might be infected with spyware. Use an anti-virus program that includes anti-spyware protection (your program may require an upgrade) to scan the computer and remove spyware. For more information, go to support.dell.com and search for the keyword spyware.RUN THE DELL DIAGNOSTICS —If all tests run successfully, the error condition is related to a software problem (see "Dell Diagnostics" on page 101).Memory ProblemsFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.IF YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE —• Save and close any open files and exit any open programs you are not using to see if that resolves the problem.• See the software documentation for minimum memory requirements. If necessary, install additional memory (see "Memory" on page 144).• Reseat the memory modules to ensure that your computer is successfully communicating with the memory (see "Memory" on page 144).• Run the Dell Diagnostics (see "Dell Diagnostics" on page 101).
120 TroubleshootingIF YOU EXPERIENCE OTHER MEMORY PROBLEMS —• Reseat the memory modules to ensure that your computer is successfully communicating with the memory (see "Memory" on page 144).• Ensure that you are following the memory installation guidelines (see "Memory" on page 144).• Run the Dell Diagnostics (see "Dell Diagnostics" on page 101). Network ProblemsFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.CHECK THE NETWORK CABLE CONNECTOR —Ensure that the network cable is firmly inserted into both the network connector on the back of the computer and the network jack.CHECK THE NETWORK LIGHTS ON THE NETWORK CONNECTOR —No light indicates that no network communication exists. Replace the network cable.RESTART THE COMPUTER AND LOG ON TO THE NETWORK AGAINCHECK YOUR NETWORK SETTINGS —Contact your network administrator or the person who set up your network to verify that your network settings are correct and that the network is functioning.Mobile Broadband (Wireless Wide Area Network [WWAN]) NOTE: The Dell Mobile Broadband Card Utility user’s guide and the Mobile Broadband ExpressCard user’s guide are available through Windows Help and Support (click Start → Help and Support). You can also download the Dell Mobile Broadband Card Utility user’s guide from support.dell.com. NOTE: The icon appears in the notification area if the computer has a Dell WWAN device installed. Double-click the icon to launch the utility.ACTIVATE THE MOBILE BROADBAND EXPRESSCARD —You must activate the Mobile Broadband ExpressCard before you can connect to the network. Position the mouse over the icon in the notification area to verify the status of the connection. If the card is not activated, follow the card activation instructions located within the Dell Mobile Broadband Card
Troubleshooting 121Utility. To access the utility, double-click the icon located in the taskbar, at the lower-right corner of your screen. If your ExpressCard is not a Dell-branded card, see the manufacturer’s instructions for your card.CHECK NETWORK CONNECTION STATUS IN THE DELL MOBILE BROADBAND CARD UTILITY —Double-click the icon to launch the Dell Mobile Broadband Card Utility. Check the status in the main window:•No card detected — Restart the computer, and launch the Dell Mobile Broadband Card Utility again. •Check your WWAN service — Contact your cellular service provider to verify your plan coverage and supported services.Power ProblemsFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.CHECK THE POWER LIGHT —When the power light is lit or blinking, the computer has power. If the power light is blinking, the computer is in Sleep state—press the power button to exit Sleep state. If the light is off, press the power button to turn on the computer. NOTE: For information on Sleep power state, see "Using the Sleep Power State" on page 48.CHARGE THE BATTERY —The battery charge may be depleted.1Reinstall the battery.2Use the AC adapter to connect the computer to an electrical outlet.3Turn on the computer. NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how often the battery is used and the conditions under which it is used, you may need to purchase a new battery during the life of your computer.CHECK THE BATTERY STATUS LIGHT —If the battery status light flashes amber or is a steady amber, the battery charge is low or depleted. Connect the computer to an electrical outlet.
122 TroubleshootingIf the battery status light flashes blue and amber, the battery is too hot to charge. Shut down the computer, disconnect the computer from the electrical outlet, and then let the battery and computer cool to room temperature.If the battery status light rapidly flashes amber, the battery may be defective. Contact Dell (see "Contacting Dell" on page 163).CHECK THE BATTERY TEMPERATURE —If the battery temperature is below 0°C (32°F), the computer will not start.TEST THE ELECTRICAL OUTLET —Ensure that the electrical outlet is working by testing it with another device, such as a lamp.CHECK THE AC ADAPTER —Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on.CONNECT THE COMPUTER DIRECTLY TO AN ELECTRICAL OUTLET —Bypass power protection devices, power strips, and extension cables to verify that the computer turns on.ELIMINATE POSSIBLE INTERFERENCE —Turn off nearby fans, fluorescent lights, halogen lamps, or other appliances.ADJUST THE POWER PROPERTIES —See "Configuring Power Management Settings" on page 47.RESEAT THE MEMORY MODULES —If the computer power light turns on, but the display remains blank, reinstall the memory modules (see "Memory" on page 144).Printer ProblemsFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: If you need technical assistance for your printer, contact the printer’s manufacturer.CHECK THE PRINTER DOCUMENTATION —See the printer documentation for setup and troubleshooting information.ENSURE THAT THE PRINTER IS TURNED ONCHECK THE PRINTER CABLE CONNECTIONS —
Troubleshooting 123• See the printer documentation for cable connection information.• Ensure that the printer cables are securely connected to the printer and the computer. TEST THE ELECTRICAL OUTLET —Ensure that the electrical outlet is working by testing it with another device, such as a lamp.VERIFY THAT THE PRINTER IS RECOGNIZED BY WINDOWS —1Click Start → Control Panel→ Hardware and Sound→ Printers.2Right-click the printer icon.3Click Properties, and then click the Ports tab. For a parallel printer, ensure that the Print to the following port(s): setting is LPT1 (Printer Port). For a USB printer, ensure that the Print to the following port(s): setting is USB.REINSTALL THE PRINTER DRIVER —See the printer documentation for instructions.Scanner Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: If you need technical assistance for your scanner, contact the scanner’s manufacturer.CHECK THE SCANNER DOCUMENTATION —See the scanner documentation for setup and troubleshooting information.UNLOCK THE SCANNER —Ensure that your scanner is unlocked.RESTART THE COMPUTER AND TRY THE SCANNER AGAINCHECK THE CABLE CONNECTIONS —• See the scanner documentation for cable connection information.• Ensure that the scanner cables are securely connected to the scanner and the computer.VERIFY THAT THE SCANNER IS RECOGNIZED BY MICROSOFT WINDOWS —Click Start → Control Panel→ Hardware and Sound→ Scanners and Cameras. If your scanner is listed, Windows recognizes the scanner.REINSTALL THE SCANNER DRIVER —See the scanner documentation for instructions.
124 TroubleshootingSound and Speaker ProblemsFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.No sound from integrated speakersADJUST THE WINDOWS VOLUME CONTROL —Double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned up and that the sound is not muted. Adjust the volume, bass, or treble controls to eliminate distortion.ADJUST THE VOLUME USING KEYBOARD SHORTCUTS —Press <Fn><End> to disable (mute) or re-enable the integrated speakers.REINSTALL THE SOUND (AUDIO) DRIVER —See "Reinstalling Drivers and Utilities" on page 128.No sound from external speakersENSURE THAT THE SUBWOOFER AND THE SPEAKERS ARE TURNED ON —See the setup diagram supplied with the speakers. If your speakers have volume controls, adjust the volume, bass, or treble to eliminate distortion.ADJUST THE WINDOWS VOLUME CONTROL —Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned up and that the sound is not muted.DISCONNECT HEADPHONES FROM THE HEADPHONE CONNECTOR —Sound from the speakers is automatically disabled when headphones are connected to the headphone connector.TEST THE ELECTRICAL OUTLET —Ensure that the electrical outlet is working by testing it with another device, such as a lamp.ELIMINATE POSSIBLE INTERFERENCE —Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.REINSTALL THE AUDIO DRIVER —See "Reinstalling Drivers and Utilities" on page 128. RUN THE DELL DIAGNOSTICS —See "Dell Diagnostics" on page 101.
Troubleshooting 125 NOTE: The volume control in some MP3 players overrides the Windows volume setting. If you have been listening to MP3 songs, ensure that you did not turn the player volume down or off.No sound from headphonesCHECK THE HEADPHONE CABLE CONNECTION —Ensure that the headphone cable is securely inserted into the headphone connector (see "Right Side View" on page 27).ADJUST THE WINDOWS VOLUME CONTROL —Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned up and that the sound is not muted.Touch Pad or Mouse ProblemsCHECK THE TOUCH PAD SETTINGS —1Click Start → Control Panel→ Hardware and Sound→ Mouse.2Adjust the settings, as needed.CHECK THE MOUSE CABLE —Shut down the computer, disconnect the mouse cable and check it for damage, then firmly reconnect the cable.If you are using a mouse extension cable, disconnect it and connect the mouse directly to the computer.TO VERIFY THAT THE PROBLEM IS WITH THE MOUSE, CHECK THE TOUCH PAD —1Shut down the computer.2Disconnect the mouse.3Turn on the computer. 4At the Windows desktop, use the touch pad to move the cursor around, select an icon, and open it.If the touch pad operates correctly, the mouse may be defective.CHECK THE SYSTEM SETUP PROGRAM SETTINGS —Verify that the system setup program lists the correct device for the pointing device option (the computer automatically recognizes a USB mouse without making any setting adjustments).
126 TroubleshootingTEST THE MOUSE CONTROLLER —To test the mouse controller (which affects pointer movement) and the operation of the touch pad or mouse buttons, run the Mouse test in the Pointing Devices test group in the "Dell Diagnostics" on page 101. REINSTALL THE TOUCH PAD DRIVER —See "Reinstalling Drivers and Utilities" on page 128.Video and Display ProblemsFill out the "Diagnostics Checklist" on page 162 as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.If the display is blank NOTE: If you are using a program that requires a higher resolution than your computer supports, it is recommended that you attach an external monitor to your computer.CHECK THE BATTERY —If you are using a battery to power your computer, the battery charge may be depleted. Connect the computer to an electrical outlet using the AC adapter, and then turn on the computer.TEST THE ELECTRICAL OUTLET —Ensure that the electrical outlet is working by testing it with another device, such as a lamp.CHECK THE AC ADAPTER —Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on.CONNECT THE COMPUTER DIRECTLY TO AN ELECTRICAL OUTLET —Bypass power protection devices, power strips, and extension cables to verify that the computer turns on.ADJUST THE POWER PROPERTIES —Search for the keyword sleep in Windows Help and Support.SWITCH THE VIDEO IMAGE —If your computer is attached to an external monitor, press <Fn><F8> to switch the video image to the display.If the display is difficult to readADJUST THE BRIGHTNESS —Press <Fn> and the up- or down-arrow key.
Troubleshooting 127MOVE THE EXTERNAL SUBWOOFER AWAY FROM THE COMPUTER OR MONITOR —If your external speaker system includes a subwoofer, ensure that the subwoofer is at least 60 cm (2 ft) away from the computer or external monitor.ELIMINATE POSSIBLE INTERFERENCE —Turn off nearby fans, fluorescent lights, halogen lamps, or other appliances.ROTATE THE COMPUTER TO FACE A DIFFERENT DIRECTION —Eliminate sunlight glare, which can cause poor picture quality.ADJUST THE WINDOWS DISPLAY SETTINGS —1Click Start → Control Panel→ Appearance and Personalization→ Personalization→ Display Settings.2Click the area you want to change or click the Display icon.Try different settings for Resolution and Colors.RUN THE VIDEO DIAGNOSTICS TESTS —If no error message appears and you still have a display problem, but the display is not completely blank, run the Video device group in the "Dell Diagnostics" on page 101, then contact Dell (see "Contacting Dell" on page 163).SEE "ERROR MESSAGES"—If an error message appears, see "Error Messages" on page 109.If only part of the display is readableCONNECT AN EXTERNAL MONITOR —1Shut down your computer and connect an external monitor to the computer.2Turn on the computer and the monitor, and then adjust the monitor brightness and contrast controls.If the external monitor works, the computer display or video controller may be defective. Contact Dell (see "Contacting Dell" on page 163).DriversWhat Is a Driver?A driver is a program that controls a device such as a printer, mouse, or keyboard. All devices require a driver program.
128 TroubleshootingA driver acts like a translator between the device and any other programs that use the device. Each device has its own set of specialized commands that only its driver recognizes.Dell ships your computer to you with required drivers already installed—no further installation or configuration is needed. NOTICE: Your Drivers and Utilities media may contain drivers for operating systems that are not on your computer. Ensure that you are installing software appropriate for your operating system.Many drivers, such as the keyboard driver, come with your Microsoft® Windows® operating system. You may need to install drivers if you:• Upgrade your operating system.• Reinstall your operating system.• Connect or install a new device.Identifying DriversIf you experience a problem with any device, identify whether the driver is the source of your problem and, if necessary, update the driver.1Click Start , and then right-click Computer.2Click Properties, and then click Device Manager. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue.Scroll down the list of devices and check for an exclamation point (a circle with a [!]) next to the device name. If an exclamation point is next to the device name, you may need to reinstall the driver or install a new driver (see "Reinstalling Drivers and Utilities" on page 128).Reinstalling Drivers and Utilities NOTICE: The Dell Support website at support.dell.com and your Drivers and Utilities media provide approved drivers for Dell computers. If you install drivers obtained from other sources, your computer might not work correctly.
Troubleshooting 129Using Windows Device Driver RollbackIf a problem occurs on your computer after you install or update a driver, use Windows Device Driver Rollback to replace the driver with the previously installed version.1Click Start , and then right-click Computer.2Click Properties, and then click Device Manager. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to enter the Device Manager.3Right-click the device for which the new driver was installed and click Properties.4Click the Drivers tab, and then click Roll Back Driver.If Device Driver Rollback does not resolve the problem, use System Restore (see "Restoring Your Operating System" on page 131) to return your computer to the operating state that existed before you installed the new driver.Using the Drivers and Utilities MediaIf using Device Driver Rollback or System Restore (see "Restoring Your Operating System" on page 131) does not resolve the problem, reinstall the driver from your Drivers and Utilities media.1With the Windows desktop displayed, insert your Drivers and Utilities media.If this is your first time to use your Drivers and Utilities media, continue to step 2. If not, proceed to step 5.2When the Drivers and Utilities installation program starts, follow the prompts on the screen. NOTE: In most cases, the Drivers and Utilities program starts running automatically. If it does not, start Windows Explorer, click your media drive directory to display the media contents, and then double-click the autorcd.exe file.3When the InstallShield Wizard Complete window appears, remove the Drivers and Utilities disc and click Finish to restart the computer.
130 Troubleshooting4When you see the Windows desktop, reinsert the Drivers and Utilities disc.5At the Welcome Dell System Owner screen, click Next. NOTE: The Drivers and Utilities program displays drivers only for hardware that came installed in your computer. If you installed additional hardware, the drivers for the new hardware might not be displayed. If those drivers are not displayed, exit the Drivers and Utilities program. For drivers information, see the documentation that came with the device.A message stating that the Drivers and Utilities program is detecting hardware in your computer appears.The drivers that are used by your computer are automatically displayed in the My Drivers—The ResourceCD has identified these components in your system window. 6Click the driver that you want to reinstall and follow the instructions on the screen. If a particular driver is not listed, then that driver is not required by your operating system.Manually Reinstalling Drivers NOTE: If your computer has a Consumer IR port and you are reinstalling a Consumer IR driver, you must first enable the Consumer IR port in the system setup program (see "Using the System Setup Program" on page 175) before continuing with the driver installation (see "Reinstalling Drivers and Utilities" on page 128). For information about components installed on your computer, see "Front View" on page 19.1After extracting the driver files to your hard drive, as described in the previous section, click Start , and then right-click Computer.2Click Properties, and then click Device Manager.3Double-click the type of device for which you are installing the driver (for example, Modems or Infrared devices).4Double-click the name of the device for which you are installing the driver.5Click Driver tab, and then click Update Driver.6Click Install from a list or specific location (Advanced), and then click Next.
Troubleshooting 1317Click Browse and browse to the location to which you previously copied the driver files.8When the name of the appropriate driver appears, click Next.9Click Finish, and then restart your computer.Troubleshooting Software and Hardware ProblemsIf a device is either not detected during the operating system setup or is detected but incorrectly configured, use Windows Vista Help and Support to resolve the incompatibility:1Click Start → Help and Support.2Ty p e hardware troubleshooter in the search field, then press <Enter>.3In the search results, select the option that best describes the problem and follow the remaining troubleshooting steps.Restoring Your Operating SystemYou can restore your operating system in the following ways:• Microsoft Windows Vista System Restore returns your computer to an earlier operating state without affecting data files. Use System Restore as the first solution for restoring your operating system and preserving data files. For instructions, see "Using Microsoft Windows System Restore" on page 132.• Dell PC Restore by Symantec restores your hard drive to the operating state it was in when you purchased the computer. Dell PC Restore permanently deletes all data on the hard drive and removes any applications installed after you received the computer. Use PC Restore only if System Restore did not resolve your operating system problem. For instructions, see "Using the Operating System Media" on page 133.
132 Troubleshooting• If you received Operating System media with your computer, you can use it to restore your operating system. However, using the Operating System media also deletes all data on the hard drive. Use the media only if System Restore did not resolve your operating system problem. For instructions, see "Using the Operating System Media" on page 133.Using Microsoft Windows System RestoreThe Windows operating system provides System Restore to allow you to return your computer to an earlier operating state (without affecting data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. Any changes that System Restore makes to your computer are completely reversible. NOTICE: Make regular backups of your data files. System Restore does not monitor your data files or recover them. NOTE: The procedures in this document were written for the Windows default view, so they may not apply if you set your Dell computer to the Windows Classic view.1Click Start → Help and Support.2Ty p e System Restore in the search field, then press <Enter>. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action.3Click Next and follow the remaining prompts on the screen.In the event that System Restore did not resolve the issue, you may undo the last system restore.Undoing the Last System Restore NOTICE: Before you undo the last system restore, save and close all open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete.1Click Start → Help and Support.2Ty p e System Restore in the search field and press <Enter>.3Click Undo my last restoration, and then click Next.
Troubleshooting 133Using the Operating System MediaBefore You BeginIf you are considering reinstalling the Windows operating system to correct a problem with a newly installed driver, first try using Windows Device Driver Rollback (see "Using Windows Device Driver Rollback" on page 129). If Device Driver Rollback does not resolve the problem, then use System Restore to return your operating system to the operating state it was in before you installed the new device driver (see "Using Microsoft Windows System Restore" on page 132). NOTICE: Before performing the installation, back up all data files on your primary hard drive. For conventional hard drive configurations, the primary hard drive is the first drive detected by the computer.To reinstall Windows, you need the following items:•Dell Operating System media•Dell Drivers and Utilities media NOTE: Your Drivers and Utilities media contains drivers that were installed during assembly of the computer. Use your Drivers and Utilities media to load any required drivers, including the drivers required if your computer has a RAID controller. Reinstalling Windows The reinstallation process can take 1 to 2 hours to complete. After you reinstall the operating system, you must also reinstall the device drivers, virus protection program, and other software. NOTICE: The Operating System media provides options for reinstalling Windows. The options can overwrite files and possibly affect programs that are installed on your hard drive. Therefore, do not reinstall Windows unless a Dell technical support representative instructs you to do so.1Save and close any open files and exit any open programs.2Insert the Operating System media.3Click Exit if the Install Windows message appears.
134 Troubleshooting4Restart the computer.When the DELL logo appears, press <F12> immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program.5When the boot device list appears, highlight CD/DVD/CD-RW Drive, and then press <Enter>.6Press any key to Boot from CD-ROM.7Follow the instructions on the screen to complete the installation.
Template Last Updated - 2/7/2007 Adding and Replacing Parts 135DELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYAdding and Replacing PartsBefore You BeginThis chapter provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist:• You have performed the steps in "Turning Off Your Computer" on page 135 and "Before Working Inside Your Computer" on page 136.• You have read the safety information in your Dell Product Information Guide.• A component can be replaced—or if purchased separately—installed by performing the removal procedure in reverse order.Recommended ToolsThe procedures in this document may require the following tools:• Small flat-blade screwdriver• Phillips screwdriver• Small plastic scribe• Flash BIOS update (see the Dell Support website at support.dell.com)Turning Off Your Computer NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn off your computer.1Save and close any open files and exit any open programs.2Click Start , click the arrow , and then click Shut Down.The computer turns off after the operating system shutdown process finishes.3Ensure that the computer and any attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for at least 8 to 10 seconds until the computer turns off.
136 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYBefore Working Inside Your ComputerUse the following safety guidelines to help protect your computer from potential damage and to help ensure your own personal safety. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins. NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the computer, perform the following steps before you begin working inside the computer. 1Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.2Turn off your computer (see "Turning Off Your Computer" on page 135). NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack.3Disconnect any telephone or network cables from the computer.4Disconnect your computer and all attached devices from their electrical outlets. NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you service the computer. NOTE: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.
Adding and Replacing Parts 137FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY5Turn the computer over.6Slide the battery release latch toward the side of the computer until it is engaged.7Slide the battery out of the battery bay.8Turn the computer top-side up, open the display, and press the power button to ground the system board. 9Remove any installed cards from the ExpressCard slot (see "Removing an ExpressCard or Blank" on page 83) and the 8-in-1 memory card reader (see "Removing a Memory Card or Blank" on page 85). Hard Drive CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To prevent data loss, turn off your computer (see "Turning Off Your Computer" on page 135) before removing the hard drive. Do not remove the hard drive while the computer is on or in Sleep state. NOTICE: Hard drives are extremely fragile. Exercise care when handling the hard drive.1battery release latch 2battery21
138 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell. NOTE: If you are installing a hard drive from a source other than Dell, you need to install an operating system, drivers, and utilities on the new hard drive (see "Restoring Your Operating System" on page 131 and "Reinstalling Drivers and Utilities" on page 128).Removing the Hard Drive1Follow the procedures in "Before You Begin" on page 135. 2Turn the computer over and remove the two hard drive screws. NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge" in the Product Information Guide).3Slide the hard drive out of the computer.1screws (2) 2hard drive21
Adding and Replacing Parts 139FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing the Hard Drive1Remove the new drive from its packaging.Save the original packaging for storing or shipping the hard drive. NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.2Slide the hard drive into the bay until it is fully seated.3Replace and tighten the two screws.4Install the operating system for your computer, as needed (see "Restoring Your Operating System" on page 131).5Install the drivers and utilities for your computer, as needed (see "Reinstalling Drivers and Utilities" on page 128). Returning a Hard Drive to DellReturn your old hard drive to Dell in its original, or comparable, foam packaging. Otherwise, the hard drive may be damaged in transit.1foam packaging 2hard drive21
140 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYOptical Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.Removing the Optical Drive1Follow the procedures in "Before You Begin" on page 135. 2Turn the computer over.3Remove the locking screw from the optical drive.4Using a plastic scribe, push the notch to release the optical drive from the bay. 5Slide the optical drive out of the bay. 1locking screw 2notch3optical drive231
Adding and Replacing Parts 141FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing the Optical Drive1Slide the optical drive into the bay. 2Replace and tighten the locking screw.Hinge Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.Removing the Hinge Cover1Follow the procedures in "Before You Begin" on page 135.2Open the display as far as it will open. NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously.3Insert a plastic scribe into the indent to lift the hinge cover on the right side.4Ease the hinge cover up, moving from right to left, and remove it.
142 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing the Hinge Cover1Insert the left edge of the hinge cover.2Press from left to right until the cover snaps into place.KeyboardFor more information about the keyboard, see "Using the Keyboard and Touchpad" on page 39. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. 1hinge cover 2scribe12
Adding and Replacing Parts 143FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYRemoving the Keyboard1Follow the procedures in "Before You Begin" on page 135.2Remove the hinge cover (see "Hinge Cover" on page 141).3Remove the two screws at the top of the keyboard. NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard.4Lift the keyboard and hold it up and slightly forward to access to the keyboard connector. 5To disconnect the keyboard cable from the keyboard connector on the system board, rotate the keyboard connector latch toward the front of the computer.6Slide the keyboard cable out of the keyboard connector. 1screws (2) 2keyboard3keyboard tabs (5) 4keyboard cable5keyboard connector latch12435
144 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing the Keyboard1Slide the keyboard cable into the keyboard connector.2Rotate the keyboard connector latch to secure the cable. 3Hook the tabs along the front edge of the keyboard into the palmrest.4Press on the right edge near the top to snap the keyboard into place.5Replace the two screws on the top of the keyboard.Memory CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.You can increase your computer memory by installing memory modules on the system board. See "Specifications" on page 165 for information on the memory supported by your computer. Install only memory modules that are intended for your computer. NOTE: Memory modules purchased from Dell are covered under your computer warranty.Your computer has two user-accessible SODIMM sockets, DIMM A and DIMM B, accessed from the bottom of the computer. NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMMA” before you install a module in the connector labeled “DIMMB.”Removing Memory ModuleThe memory modules are located under the memory module cover on the bottom of the computer.1Follow the procedures in "Before You Begin" on page 135. 2Turn the computer upside-down, loosen the five captive screws on the cover (see "Bottom View" on page 30), and remove the cover.
Adding and Replacing Parts 145FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).3Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. 4Remove the module from the connector.1cover 2captive screws (5)21
146 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing Memory Module NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).1Align the notch in the module edge connector with the tab in the connector slot. 2Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure.1securing clips (2) 2memory module1 2
Adding and Replacing Parts 147FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.3Replace the memory module cover.4Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.5Turn on the computer.As the computer boots, it detects the additional memory and automatically updates the system configuration information.To confirm the amount of memory installed in the computer, click Start → Help and Support→ Dell System Information.Subscriber Identity Module (Optional)Subscriber Identity Modules (SIM) identify users uniquely through an International Mobile Subscriber Identity. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.1tab 2notch12
148 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY NOTE: Only GSM (HSDPA) type cards need a SIM. EVDO cards do not use a SIM.1Follow the procedures in "Before You Begin" on page 135.2In the battery bay, slide the SIM into the compartment with the cut-off corner of the card facing away from the compartment.Wireless Mini-Cards CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. If you ordered a wireless Mini-Card with your computer, the card is already installed. Your computer supports three types of wireless Mini-Cards:• Wireless Local Area Network (WLAN)1SIM 2battery bay12
Adding and Replacing Parts 149FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY• Ultra-Wideband (UWB) card• Mobile Broadband or Wireless Wide Area Network (WWAN) Removing Mini-Card1Follow the procedures in "Before You Begin" on page 135. 2Turn the computer over.3Loosen the five captive screws securing the cover and remove the cover.1cover 2captive screws (5)21
150 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY4Disconnect the antenna cables from the Mini-card. NOTE: The Mini-card may have two or three connectors, depending on the type of card you ordered.5Release the Mini-card by removing the securing screw.6Lift the card out of its system board connector.1antenna cable connectors 2securing screw12
Adding and Replacing Parts 151FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing Mini-Card NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. NOTICE: To avoid damage to the Mini-card, never place cables under the card.1Insert the card connector into the system board connector at a 45-degree angle.2Press the other end of the card down into the slot on the system board until the card clicks into place.3Replace the securing screw.4Connect the cables to the Mini-Card, ensuring that you route the cables correctly. NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mini Card.5Secure unused antenna cables in the protective mylar sleeve.6Replace the cover and tighten the five captive screws.1Mini-card1
152 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYFlash Cache ModuleThe Flash Cache Module or FCM, is an internal memory card that helps improve the performance of your computer. The FCM card is also known as Intel Turbo Memory and the Intel Flash Cache Logic Chip Mini-card. NOTE: This card is only compatible with the Microsoft Windows Vista™ operating system and Intel platform. If you ordered an FCM with your computer, it is already installed.Removing the FCM1Follow the procedures in "Before You Begin" on page 135. 2Turn the computer over and remove the cover on the Mini Card compartment.3Ground yourself by touching one of the metal connectors on the back of the computer. NOTE: If you leave the area, ground yourself again when you return to the computer. 4Remove the M2 x 3-mm securing screw.5Remove the FCM.21
Adding and Replacing Parts 153FILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYReplacing the FCM NOTICE: Install the FCM in the WWAN slot. Do not install an FCM in the WLAN card slot. Doing so may cause damage to your computer.1Insert the FCM connector at a 45-degree angle into the system board connector labeled "FCM".2Press the other end of the FCM down into the slot on the system board until the card clicks into place.3Replace the M2 x 3-mm securing screw.Broadcom® Media PC CardThe Broadcom Media PC card is used in conjunction with blu-ray optical drives to render high definition content.The Broadcom Media PC card can be installed either in the UWB or WWAN Mini-Card slots. You can remove and replace the Media PC card the same way you would remove or replace FCM. For more information, see "Flash Cache Module" on page 152.Internal Card With Bluetooth® Wireless Technology CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.1FCM Card 2M2 x 3-mm securing screw
154 Adding and Replacing PartsFILE LOCATION: C:\Projects\Spears\SpearsHTML\parts.fmDELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLYRemoving the Card1Follow the procedures in "Before You Begin" on page 135.2Remove the hinge cover (see "Hinge Cover" on page 141).3Remove the screw securing the card.4Grasp the connector end of the card and slide it out from under the securing tabs.5Disconnect the cable from the card. Replacing the Card1Replace the screw securing the card and insert the card at an angle to slide it in the card compartment.2Connect the cable to the card. 1securing screw 2card12
Traveling With Your Computer 155Traveling With Your ComputerIdentifying Your Computer• Attach a name tag or business card to the computer.• Write down your Service Tag and store it in a safe place away from the computer or carrying case. Use the Service Tag if you need to report a loss or theft to law enforcement officials and to Dell.• Create a file on the Microsoft® Windows® desktop called if_found. Place information such as your name, address, and phone number in this file.• Contact your credit card company and ask if it offers coded identification tags.Packing the Computer• Remove any external devices attached to the computer and store them in a safe place.• Fully charge the main battery and any spare batteries that you plan to carry with you.• Shut down the computer.• Disconnect the AC adapter. NOTICE: When the display is closed, extraneous items on the keyboard or palm rest could damage the display.• Remove any extraneous items, such as paper clips, pens, and paper, from the keyboard and palm rest and close the display.• Use the optional Dell carrying case to pack the computer and its accessories together safely.• Avoid packing the computer with items such as shaving cream, colognes, perfumes, or food. NOTICE: If the computer has been exposed to extreme temperatures, allow it to acclimate to room temperature for 1 hour before turning it on.
156 Traveling With Your Computer• Protect the computer, the batteries, and the hard drive from hazards such as extreme temperatures and overexposure to sunlight, dirt, dust, or liquids.• Pack the computer so that it does not slide around in the trunk of your car or in an overhead storage compartment.Travel Tips NOTICE: Do not move the computer while using the optical drive to prevent loss of data. NOTICE: Do not check the computer as baggage.• Consider disabling wireless activity on your computer to maximize battery operating time. To disable wireless activity, use the wireless switch (see "" on page 29).• Consider changing your power management options to maximize battery operating time (see "Configuring Power Management Settings" on page 47).• If you are traveling internationally, carry proof of ownership—or of your right to use the computer if it is company-owned—to speed your passage through customs. Investigate the customs regulations of the countries you plan to visit, and consider acquiring an international carnet (also known as a merchandise passport) from your government.• Find out what type of electrical outlets are used in the countries you will visit, and have appropriate power adapters.• Check with your credit card company for information about the kinds of emergency travel assistance it offers to users of portable computers.Traveling by Air NOTICE: Do not walk the computer through a metal detector. Send the computer through an X-ray machine or have it hand-inspected.• Ensure that you have a charged battery available in case you are asked to turn on the computer.• Prior to entering the airplane, verify that using a computer is permitted. Some airlines forbid the use of electronic devices during flight. All airlines forbid the use of electronic devices during takeoff and landing.
Getting Help 157Getting HelpObtaining Assistance CAUTION: If you need to remove the computer cover, first disconnect the computer power and modem cables from all electrical outlets.If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem:1See "Troubleshooting" on page 101 for information and procedures that pertain to the problem your computer is experiencing.2See "Dell Diagnostics" on page 101 for procedures on how to run Dell Diagnostics.3Fill out the "Diagnostics Checklist" on page 162.4Use Dell's extensive suite of online services available at Dell Support (support.dell.com) for help with installation and troubleshooting procedures. See "Online Services" on page 158 for a more extensive list of Dell Support online.5If the preceding steps have not resolved the problem, see "Contacting Dell" on page 163. NOTE: Call Dell Support from a telephone near or at the computer so that the support staff can assist you with any necessary procedures. NOTE: Dell's Express Service Code system may not be available in all countries.When prompted by Dell's automated telephone system, enter your Express Service Code to route the call directly to the proper support personnel.For instructions on using the Dell Support, see "Technical Support and Customer Service" on page 158. NOTE: Some of the following services are not always available in all locations outside the continental U.S. Call your local Dell representative for information on availability.
158 Getting HelpTechnical Support and Customer ServiceDell's support service is available to answer your questions about Dell™ hardware. Our support staff uses computer-based diagnostics to provide fast, accurate answers.To contact Dell's support service, see "Before You Call" on page 161, and then see the contact information for your region or go to support.dell.com.DellConnectDellConnect is a simple online access tool that allows a Dell service and support associate to access your computer through a broadband connection, diagnose your problem and repair it all under your supervision. For more information, go to support.dell.com and click DellConnect.Online ServicesYou can learn about Dell products and services on the following websites:www.dell.comwww.dell.com/ap (Asian/Pacific countries only)www.dell.com/jp (Japan only)www.euro.dell.com (Europe only)www.dell.com/la (Latin American and Caribbean countries)www.dell.ca (Canada only)You can access Dell Support through the following websites and e-mail addresses:• Dell Support websitessupport.dell.comsupport.jp.dell.com (Japan only)support.euro.dell.com (Europe only)• Dell Support e-mail addressesmobile_support@us.dell.comsupport@us.dell.com
Getting Help 159la-techsupport@dell.com (Latin America and Caribbean countries only)apsupport@dell.com (Asian/Pacific countries only)• Dell Marketing and Sales e-mail addressesapmarketing@dell.com (Asian/Pacific countries only)sales_canada@dell.com (Canada only)• Anonymous file transfer protocol (FTP)ftp.dell.comLog in as user: anonymous, and use your e-mail address as your password.AutoTech ServiceDell's automated support service—AutoTech—provides recorded answers to the questions most frequently asked by Dell customers about their portable and desktop computers.When you call AutoTech, use your touch-tone telephone to select the subjects that correspond to your questions. For the telephone number to call for your region, see "Contacting Dell" on page 163.Automated Order-Status ServiceTo check on the status of any Dell products that you have ordered, you can go to support.dell.com, or you can call the automated order-status service. A recording prompts you for the information needed to locate and report on your order. For the telephone number to call for your region, see "Contacting Dell" on page 163.Problems With Your OrderIf you have a problem with your order, such as missing parts, wrong parts, or incorrect billing, contact Dell for customer assistance. Have your invoice or packing slip handy when you call. For the telephone number to call for your region, see "Contacting Dell" on page 163.
160 Getting HelpProduct InformationIf you need information about additional products available from Dell, or if you would like to place an order, visit the Dell website at www.dell.com. For the telephone number to call for your region or to speak to a sales specialist, see the "Contacting Dell" on page 163.Returning Items for Warranty Repair or CreditPrepare all items being returned, whether for repair or credit, as follows:1Call Dell to obtain a Return Material Authorization Number, and write it clearly and prominently on the outside of the box.For the telephone number to call for your region, see "Contacting Dell" on page 163.2Include a copy of the invoice and a letter describing the reason for the return.3Include a copy of the Diagnostics Checklist (see "Diagnostics Checklist" on page 162), indicating the tests that you have run and any error messages reported by the Dell Diagnostics (see "Dell Diagnostics" on page 101).4Include any accessories that belong with the item(s) being returned (power cables, software floppy disks, guides, and so on) if the return is for credit.5Pack the equipment to be returned in the original (or equivalent) packing materials.You are responsible for paying shipping expenses. You are also responsible for insuring any product returned, and you assume the risk of loss during shipment to Dell. Collect On Delivery (C.O.D.) packages are not accepted.Returns that are missing any of the preceding requirements will be refused at Dell’s receiving dock and returned to you.
Getting Help 161Before You Call NOTE: Have your Express Service Code ready when you call. The code helps Dell’s automated-support telephone system direct your call more efficiently. You may also be asked for your Service Tag (located on the back or bottom of your computer).Remember to fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 162). If possible, turn on your computer before you call Dell for assistance and call from a telephone at or near the computer. You may be asked to type some commands at the keyboard, relay detailed information during operations, or try other troubleshooting steps possible only at the computer itself. Ensure that the computer documentation is available. CAUTION: Before working inside your computer, follow the safety instructions in your Product Information Guide.
162 Getting HelpDiagnostics ChecklistName:Date:Address:Phone number:Service Tag (bar code on the back or bottom of the computer):Express Service Code:Return Material Authorization Number (if provided by Dell support technician):Operating system and version:Devices:Expansion cards:Are you connected to a network? Yes NoNetwork, version, and network adapter:Programs and versions:See your operating system documentation to determine the contents of the system’s start-up files. If the computer is connected to a printer, print each file. Otherwise, record the contents of each file before calling Dell.Error message, beep code, or diagnostic code:Description of problem and troubleshooting procedures you performed:
Getting Help 163Contacting DellFor customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, Contacting Dell techsheet, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:1Visit support.dell.com.2Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page. 3Click Contact Us on the left side of the page.4Select the appropriate service or support link based on your need.5Choose the method of contacting Dell that is convenient for you.
164 Getting Help
Specifications 165Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start , click Help and Support, and then select the option to view information about your computer.ProcessorProcessor type AMD® Tu r i o n ™ 64 X2 Dual-Core Mobile TechnologyAMD® Athlon™ 64 X2 Dual-Core Mobile TechnologyAMD® Sempron™ Mobile TechnologyIntel® Celeron™Intel® Core™ DuoIntel® Core™ 2 DuoIntel® Core™ 2 Duo T5250Intel® Core™ 2 Duo T5450L1 cache 128 KB per core (AMD)32 KB per instruction, 32 KB data cache per core (Intel)L2 cache 256 KB or 512 KB per core depending on model (AMD)1 MB, 2 MB, or 4 MB per core depending on model (Intel)External bus frequency Front Side Bus 1600 MT HyperTransport(AMD)533/667/800 MHz (Intel)System InformationSystem chipset AMD M690T Chipset with ATI™ Radeon® X1270 GraphicsMobile Intel Express GM 965
166 SpecificationsData bus width 64 bitsDRAM bus width dual-channel (2) 64-bit busesProcessor address bus width 36 bits (Intel) and 32 bits (AMD)Flash EPROM 2 MBPCI bus 32 bitsExpressCardNOTE: The ExpressCard slot is designed only for ExpressCards. It does NOT support PC Cards.ExpressCard controller ATI RS690TIntel ICH8MExpressCard connector one ExpressCard slot (54 mm)Cards supported ExpressCard/34 (34 mm) ExpressCard/54 (54 mm)1.5 V and 3.3 VExpressCard connector size 26 pins8-in-1 Memory Card Reader8-in-1 memory card controller Ricoh R5C8338-in-1 memory card connector 8-in-1 combo card connectorCards supported• Secure Digital (SD)•SDIO• MultiMediaCard (MMC)•Memory Stick• Memory Stick PRO• xD-Picture Card• Hi Speed-SD• Hi Density-SDMemoryMemory module connector two user-accessible SODIMM connectorsSystem Information (continued)
Specifications 1671 Four USB connectors for the upsell version of the computerMemory module capacities 512 MB, 1 GB, 2 GBMemory type 667 MHz SODIMM DDR2Minimum memory 512 MBMaximum memory 4 GBNOTE: In order to take advantage of the dual channel bandwidth capability, both memory slots must be populated and must match in size.NOTE: The available memory displayed does not reflect the complete maximum memory installed because some memory is reserved for system files.Ports and ConnectorsAudio microphone connector, stereo headphone/speakers connectorIEEE 1394a 4-pin serial connector (optional)Consumer IR sensor compatible with Philips RC6 (receive only)Mini Card three Type IIIA Mini-Card slots (two slots are standard and one is optional)Modem RJ-11 port (optional)Network adapter RJ-45 portS-video TV-out optional 7-pin mini-DIN connector (optional S-video to composite video adapter cable)USB three 14-pin USB 2.0-compliant connectorsVideo 15-hole connectorHDMI (optional) one 29 pin Type B HDMI connector.CommunicationsModem (optional):Ty p ev.92 56K Data/FAX MDCControllersoftmodemMemory (continued)
168 SpecificationsInterfaceIntel High-Definition AudioNetwork adapter 10/100 Ethernet LAN on system boardWireless internal WLAN, WWAN, UWB (optional) Mini CardsWWAN ExpressCardBluetooth® wireless technologyVideoVideo type: integrated ATI graphics with 64 MB local frame bufferVideo controllerATI Radeon® X1270 Graphics Controller (AMD)orIntel 965 GM (Intel)Video memorydynamic based on system memory capacityLCD interfaceLVDSTV supportNTSC or PAL in S-video, composite, and component modesAudioAudio type two-channel high-definition audio codecAudio controller Sigmatel STAC9228 CodecStereo conversion 24-bit (analog-to-digital and digital-to-analog)Interfaces:InternalIntel High Definition AudioExternalmicrophone-in connector, stereo headphones/speakers connectorSpeaker two 4-ohm speakersInternal speaker amplifier 1 Watt per channel into 4 ohmsVolume controls program menus, media control buttonsCommunications (continued)
Specifications 169DisplayType (active-matrix TFT) 15.4-inch WXGA15.4-inch WXGA with TrueLife15.4-inch WXGA+ with TrueLife15.4-inch WSXGA+with TrueLifeDimensions:Height207.0 mm (8.1 in) Width331.2 mm (13.0 in)Diagonal391.2 mm (15.4 in) Maximum resolutions:WXGA1280 x 800 at 262 K colorsWXGA with TrueLife1280 x 800 at 262 K colorsWXGA+ with TrueLife1440 x 900 at 262 K colorsWSXGA+with TrueLife1680 x 1050 at 262 K colorsRefresh rate 60 HzOperating angle 0° (closed) to 155°Viewing angles:Horizontal±40° (WXGA)±40° (WXGA with TrueLife)±55° (WXGA+ with TrueLife) ±60° (WSXGA+ with TrueLife)Vertical+15°/–30° (WXGA)+15°/–30° (WXGA with TrueLife)±45° (WXGA+ with TrueLife) +40°/–50° (WSXGA+ with TrueLife)Pixel pitch:WXGA0.258 mmWXGA with TrueLife0.258 mmWXGA+ with TrueLife0.2304 mmWSXGA+with TrueLife0.197 mm
170 SpecificationsControls brightness can be controlled through keyboard shortcuts (see "Display Functions" on page 40)MediaDrive DVD combo, DVD+RW, Blu-ray® (need Broadcom Media PC card to support Blu-ray disc)Interface Roxio® Creator Plus®, Dell MediaDirect™ 3.3KeyboardNumber of keys 87 (U.S. and Canada); 88 (Europe); 91 (Japan)Layout QWERTY/AZERTY/KanjiCamera (optional)Pixel 2.0 mega pixelVideo Resolution 640x480 at 30fpsDiagonal Viewing Angle 60°Touch PadX/Y position resolution (graphics table mode) 240 cpiSize:Width73.7-mm (2.9-in) sensor-active area Height34.0-mm (1.3-in) rectangleDisplay (continued)
Specifications 171BatteryType 9-cell "smart" lithium ion 6-cell "smart" lithium ion4-cell "smart" lithium ionDimensions:Depth57.2 mm (2.25 in) (4/6 cell)76.7 mm (3.01 in) (9 cell)Height20 mm (0.78 in)Width205.1 mm (8.07 in) (4/6 cell)221 mm (8.7 in) (9 cell)Weight 0.35 kg (0.77 lb) (6 cell) 0.51 kg (1.12 lb) (9 cell)Voltage 11.1 VDC (6/9 cell)14.8 VDC (4 cell)Charge time (approximate):Computer off4 hoursOperating time Battery operating time varies depending on operating conditions and can be significantly reduced under certain power-intensive conditions (see "Power Problems" on page 121). See "Using a Battery" on page 45 for more information on battery life.Life span (approximate) 300 discharge/charge cyclesTemperature range:Operating0° to 35°C (32° to 95°F)Storage–40° to 65°C (–40° to 149°F)Coin-cell battery CR-2032AC AdapterInput voltage 100–240 VAC
172 SpecificationsInput current (maximum) 1.5 AInput frequency 50–60 HzOutput current 3.34 A (continuous)4.34 A (peak for 4-second pulse)Output power 65 WRated output voltage 19.5 VDC +/– 5%Dimensions:Height28.2 mm (1.11 in) Width57.9 mm (2.28 in) Depth137.2 mm (5.4 in) Weight (with cables)0.4 kg (0.9 lb) Temperature range:Operating0° to 35°C (32° to 95°F) Storage–40° to 65°C (–40° to 149°F)PhysicalHeight 25.4 mm to 37.8 mm (1in to 1.48 in) Width 357 mm (14.05 in)Depth 256 mm (10.08 in)Weight (with 4-cell battery):Configurable to less than2.7 kg (5.9 lb)AC Adapter (continued)
Specifications 173EnvironmentalTemperature range:Operating0° to 35°C (32° to 95°F)Storage–40° to 65°C (–40° to 149°F)Relative humidity (maximum):Operating10% to 90% (noncondensing)Storage5% to 90% (noncondensing)Maximum vibration (using a random vibration spectrum that simulates user environment):Operating0.66 GRMSMaximum shock (Measured with hard drive in operating but not accessing data status and a 3-ms half-sine pulse for operating. Also measured with hard drive in head-parked position and a 2-ms halfsine pulse for storage):Operating"X & Y axes (parallel to system bottom): 30G"Z axis (perpendicular to system bottom): 40GStorage163 GMaximum bench handling height (Measured with hard drive in idle mode, lifting the system by one edge, placing the opposite edge on the table and then releasing the system to impact against the table): 10 cmAltitude (maximum):Operating–15.2 to 3048 m (–50 to 10,000 ft)Storage–15.2 to 10,668 m (–50 to 35,000 ft)
174 Specifications
Appendix 175AppendixUsing the System Setup Program NOTE: Your operating system may automatically configure most of the options available in system setup, thus overriding options that you set through system setup. An exception is the External Hot Key option, which you can disable or enable only through system setup. For more information on configuring features for your operating system, see Windows Help and Support (click Start , and then click Help and Support).You can use system setup as follows:• To set or change user-selectable features such as your computer password• To verify information about the computer's current configuration such as the amount of system memoryAfter you set up the computer, run system setup to familiarize yourself with your system configuration information and optional settings. You may want to write down the information for future reference.The system setup screens display the current setup information and settings for your computer, such as:• System configuration• Boot order• Boot (start-up) configuration • Basic device configuration settings• System security and hard drive password settings NOTE: Unless you are an expert computer user or are directed to do so by Dell technical support, do not change the system setup settings. Certain changes might make your computer work incorrectly.
176 AppendixViewing the System Setup Screen1Turn on (or restart) your computer.2When the DELL logo appears, press <F2> immediately.If you wait too long and the Microsoft Windows logo appears, continue to wait until you see the Windows desktop, then shut down your computer and try again.System Setup Screen NOTE: For information about a specific item on a system setup screen, highlight the item and see the Help area on the screen.On each screen, the system setup options are listed at the left. To the right of each option is the setting or value for that option. You can change settings that appear as white type on the screen. Options or values that you cannot change (because they are determined by the computer) appear less bright.The upper-right corner of the screen displays help information for the currently highlighted option; the lower-right corner displays information about the computer. System setup key functions are listed across the bottom of the screen.Commonly Used OptionsCertain options require that you reboot the computer for new settings to take effect.Changing the Boot SequenceThe boot sequence, or boot order, tells the computer where to look to find the software needed to start the operating system. You can control the boot sequence and enable/disable devices using the Boot Order page of the system setup program. NOTE: To change the boot sequence on a one-time-only basis, see "Performing a One-Time Boot" on page 177.The Boot Order page displays a general list of the bootable devices that may be installed in your computer, including but not limited to the following:• Diskette Drive• Internal HDD
Appendix 177• USB Storage Device• CD/DVD/CD-RW drive• Modular bay HDD NOTE: Only devices that are preceded by a number are bootable.During the boot routine, the computer starts at the top of the list and scans each enabled device for the operating system start-up files. When the computer finds the files, it stops searching and starts the operating system. To control the boot devices, select (highlight) a device by pressing the down-arrow or up-arrow key, and then enable or disable the device or change its order in the list.• To enable or disable a device, highlight the item and press the space bar. Enabled items are preceded by a number; disabled items are not preceded by a number.• To reorder a device in the list, highlight the device and press <u> to move the device up the list or <d> to move a device down the list.Boot sequence changes take effect as soon as you save the changes and exit the system setup program.Performing a One-Time BootYou can set a one-time-only boot sequence without entering the system setup program (you can also use this procedure to boot the Dell Diagnostics on the diagnostics utility partition on your hard drive).1Shut down the computer through the Start menu.2Connect the computer to an electrical outlet.3Turn on the computer. When the DELL logo appears, press <F12> immediately.If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop, then shut down your computer and try again.4When the boot device list appears, highlight the device from which you want to boot and press <Enter>.The computer boots to the selected device.The next time you reboot the computer, the previous boot order is restored.
178 AppendixCleaning Your Computer CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.Computer, Keyboard, and Display CAUTION: Before you clean your computer, disconnect the computer from the electrical outlet and remove any installed batteries. Clean your computer with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.• Use a can of compressed air to remove dust from between the keys on the keyboard and to remove any dirt or lint from the display. NOTICE: To help prevent damage to the computer or display, do not spray cleaning solution directly onto the display. Only use products specifically designed for cleaning displays, and follow the instructions that are included with the product.• Moisten a soft, lint-free cloth with either water or a display cleaner. Do not use alcohol or an ammonia-based cleaner. Wipe the display gently working from the center to the edges until it is clean and any fingerprints are removed. Do not use excessive pressure. NOTICE: To prevent damage to the antiglare coating, do not wipe the display with soap or alcohol.• Moisten a soft, lint-free cloth with water and wipe the computer and keyboard. Do not allow water from the cloth to seep between the touch pad and the surrounding palm rest.• To clean your monitor screen, lightly dampen a soft, clean cloth with water. You can also use a special screen-cleaning tissue or solution suitable for the monitor’s antistatic coating.• Wipe the keyboard, computer, and monitor plastics with a soft cleaning cloth moistened with a solution of three parts water and one part dishwashing detergent.Do not soak the cloth or let water drip inside your computer or keyboard.Touch Pad1Shut down and turn off your computer (see "Turning Off Your Computer" on page 135).
Appendix 1792Disconnect any attached devices from the computer and from their electrical outlets.3Remove any installed batteries (see "Battery Performance" on page 45).4Moisten a soft, lint-free cloth with water, and wipe it gently across the surface of the touch pad. Do not allow water from the cloth to seep between the touch pad and the surrounding palm rest. Mouse NOTICE: Disconnect the mouse from the computer before cleaning the mouseIf your screen cursor skips or moves abnormally, clean the mouse. Cleaning an Optical MouseClean the outside casing of the mouse with a cloth moistened with a mild cleaning solution. Media NOTICE: Always use compressed air to clean the lens in the optical drive, and follow the instructions that come with the compressed air product. Never touch the lens in the drive.If you notice problems, such as skipping, with the playback quality of your media, try cleaning the discs.1Hold the disc by its outer edge. You can also touch the inside edge of the center hole. NOTICE: To help prevent damage to the surface, do not wipe in a circular motion around the disc.2With a soft, lint-free cloth, gently wipe the bottom of the disc (the unlabeled side) in a straight line from the center to the outer edge of the disc.For stubborn dirt, try using water or a diluted solution of water and mild soap. You can also purchase commercial products that clean discs and provide some protection from dust, fingerprints, and scratches. Cleaning products for CDs are also safe to use on DVDs.
180 AppendixDell Technical Support Policy (U.S. Only)Technician assisted technical support requires the cooperation and participation of the customer in the troubleshooting process and provides for restoration of the operating system, software programs, and hardware drivers to the original default configuration as shipped from Dell, as well as the verification of appropriate functionality of the computer and all Dell-installed hardware. In addition to this technician assisted technical support, online technical support is available at support.dell.com. Additional technical support options may be available for purchase.Dell provides limited technical support for the computer and any "Dell-installed" software and peripherals1. Support for third-party software and peripherals is provided by the original manufacturer, including those purchased and/or installed through Dell Software and Peripherals, Readyware, and Custom Factory Integration2.1 Repair services are provided pursuant to the terms and conditions of your limited warranty and any optional support service contract purchased with the computer.2 All Dell-standard components included in a Custom Factory Integration (CFI) project are covered by the standard Dell limited warranty for your computer. However, Dell also extends a parts replacement program to cover all nonstandard, third-party hard-ware components integrated through CFI for the duration of the computer’s service contract.Definition of "Dell-Installed" Software and PeripheralsDell-installed software includes the operating system and some of the software programs that are installed on the computer during the manufacturing process (Microsoft Office, Norton Antivirus, etc).Dell-installed peripherals include any internal expansion cards, or Dell-branded module bay or ExpressCard accessories. In addition, any Dell-branded monitors, keyboards, mice, speakers, microphones for telephonic modems, docking stations/port replicators, networking products, and all associated cabling are included.Definition of "Third-Party" Software and PeripheralsThird-party software and peripherals include any peripheral, accessory, or software program sold by Dell not under the Dell brand (printers, scanners, cameras, games, etc). Support for all third-party software and peripherals is provided by the original manufacturer of the product.
Appendix 181FCC Notice (U.S. Only)FCC Class BThis equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient the receiving antenna.• Relocate the system with respect to the receiver.• Move the system away from the receiver.• Plug the system into a different outlet so that the system and the receiver are on different branch circuits. If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions. The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
182 AppendixMacrovision Product NoticeThis product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.Product name: Dell™ Inspiron™ 1525/1526Model number: PP29LCompany name: Dell Inc.Worldwide Regulatory Compliance & Environmental AffairsOne Dell WayRound Rock, TX 78682 USA512-338-4400
Glossary 183GlossaryTerms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer.AAC — alternating current — The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet.ACPI — advanced configuration and power interface — A power management specification that enables Microsoft® Windows® operating systems to put a computer in standby or hibernate mode to conserve the amount of electrical power allocated to each device attached to the computer.AGP — accelerated graphics port — A dedicated graphics port that allows system memory to be used for video-related tasks. AGP delivers a smooth, true-color video image because of the faster interface between the video circuitry and the computer memory.AHCI — Advanced Host Controller Interface — An interface for a SATA hard drive Host Controller which allows the storage driver to enable technologies such as Native Command Queuing (NCQ) and hot plug.ALS — ambient light sensor — A feature that helps to control display brightness.AMT — Intel® Active Management Technology— Delivers more secure systems management capabilities whether or not the computer is powered up or turned off, or the operating system is not responding.antivirus software — A program designed to identify, quarantine, and/or delete viruses from your computer.ASF — alert standards format — A standard to define a mechanism for reporting hardware and software alerts to a management console. ASF is designed to be platform- and operating system-independent.Bbattery life span — The length of time (years) during which a portable computer battery is able to be depleted and recharged.battery operating time — The length of time (minutes or hours) that a portable
184 Glossarycomputer battery powers the computer.BD — See Blu-ray Disc. BIOS — basic input/output system — A program (or utility) that serves as an interface between the computer hardware and the operating system. Unless you understand what effect these settings have on the computer, do not change them. Also referred to as system setup.bit — The smallest unit of data interpreted by your computer.Bluetooth® wireless technology — A wireless technology standard for short-range (9 m [29 feet]) networking devices that allows for enabled devices to automatically recognize each other.Blu-ray Disc — Blu-ray Disc (BD) is an optical disc format jointly developed by the Blu-ray Disc Association (BDA). A BD records and plays high-definition video (HD), and stores large amounts of data: five times the storage capacity of a DVD and can hold up to 25GB on a single-layer disc and 50GB on a dual-layer disc.BD-R — Blu-ray Disc recordable refers to two optical disc formats that can be recorded with an optical disc recorder. BD-R discs can be written to once.BD-RE — Blu-ray Disc RE can be erased and re-recorded multiple times.boot sequence — Specifies the order of the devices from which the computer attempts to boot.bootable CD — A CD that you can use to start your computer. In case your hard drive is damaged or your computer has a virus, ensure that you always have a bootable CD or floppy disk available. Your Drivers and Utilities media is a bootable CD.bootable disk — A disk that you can use to start your computer. In case your hard drive is damaged or your computer has a virus, ensure that you always have a bootable CD or floppy disk available.bps — bits per second — The standard unit for measuring data transmission speed.BTU — British thermal unit — A measurement of heat output.bus — A communication pathway between the components in your computer.bus speed — The speed, given in MHz, that indicates how fast a bus can transfer information.byte — The basic data unit used by your computer. A byte is usually equal to 8 bits.CC — Celsius — A temperature measurement scale where 0° is the freezing point and 100° is the boiling point of water.
Glossary 185cache — A special high-speed storage mechanism which can be either a reserved section of main memory or an independent high-speed storage device. The cache enhances the efficiency of many processor operations.L1 cache — Primary cache stored inside the processor.L2 cache — Secondary cache which can either be external to the processor or incorporated into the processor architecture.carnet — An international customs document that facilitates temporary imports into foreign countries. Also known as a merchandise passport.CD-R — CD recordable — A recordable version of a CD. Data can be recorded only once onto a CD-R. Once recorded, the data cannot be erased or written over.CD-RW — CD rewritable — A rewritable version of a CD. Data can be written to a CD-RW disc, and then erased and written over (rewritten).CD-RW drive — A drive that can read CDs and write to CD-RW (rewritable CDs) and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, but you can write to CD-R discs only once.CD-RW/DVD drive — A drive, sometimes referred to as a combo drive, that can read CDs and DVDs and write to CD-RW (rewritable CDs) and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, but you can write to CD-R discs only once.clock speed — The speed, given in MHz, that indicates how fast computer components that are connected to the system bus operate. CMOS — A type of electronic circuit. Computers use a small amount of battery-powered CMOS memory to hold date, time, and system setup options. COA — Certificate of Authenticity — The Windows alpha-numeric code located on a sticker on your computer. Also referred to as the Product Key orProduct ID.Consumer IR — Sensor for using Dell Travel remote control.Control Panel — A Windows utility that allows you to modify operating system and hardware settings, such as display settings.controller — A chip that controls the transfer of data between the processor and memory or between the processor and devices.CRIMM — continuity rambus in-line memory module — A special module that has no memory chips and is used to fill unused RIMM slots.cursor — The marker on a display or screen that shows where the next keyboard, touch pad, or mouse action will occur. It often is a blinking solid line, an underline character, or a small arrow.
186 GlossaryDDDR SDRAM — double-data-rate SDRAM — A type of SDRAM that doubles the data burst cycle, improving system performance.DDR2 SDRAM — double-data-rate 2 SDRAM — A type of DDR SDRAM that uses a 4-bit prefetch and other architectural changes to boost memory speed to over 400 MHz.device — Hardware such as a disk drive, printer, or keyboard that is installed in or connected to your computer.device driver — See driver.DIMM — dual in-line memory module — A circuit board with memory chips that connects to a memory module on the system board.DIN connector — A round, six-pin connector that conforms to DIN (Deutsche Industrie-Norm) standards; it is typically used to connect PS/2 keyboard or mouse cable connectors.disk striping — A technique for spreading data over multiple disk drives. Disk striping can speed up operations that retrieve data from disk storage. Computers that use disk striping generally allow the user to select the data unit size or stripe width. DMA — direct memory access — A channel that allows certain types of data transfer between RAM and a device to bypass the processor.DMTF — Distributed Management Task Force — A consortium of hardware and software companies who develop management standards for distributed desktop, network, enterprise, and Internet environments.domain — A group of computers, programs, and devices on a network that are administered as a unit with common rules and procedures for use by a specific group of users. A user logs on to the domain to gain access to the resources.DRAM — dynamic random-access memory — Memory that stores information in integrated circuits containing capacitors.driver — Software that allows the operating system to control a device such as a printer. Many devices do not work properly if the correct driver is not installed in the computer.DSL — Digital Subscriber Line — A technology that provides a constant, high-speed Internet connection through an analog telephone line. dual-core — An Intel® technology in which two physical computational units exist inside a single processor package, thereby increasing computing efficiency and multi-tasking ability.dual display mode — A display setting that allows you to use a second monitor as an
Glossary 187extension of your display. Also referred to as extended display mode.DVD-R — DVD recordable — A recordable version of a DVD. Data can be recorded only once onto a DVD-R. Once recorded, the data cannot be erased or written over.DVD+RW — DVD rewritable — A rewritable version of a DVD. Data can be written to a DVD+RW disc, and then erased and written over (rewritten). (DVD+RW technology is different from DVD-RW technology.)DVD+RW drive — drive that can read DVDs and most CD media and write to DVD+RW (rewritable DVDs) discs.DVI — digital video interface — A standard for digital transmission between a computer and a digital video display.EECC — error checking and correction — A type of memory that includes special circuitry for testing the accuracy of data as it passes in and out of memory.ECP — extended capabilities port — A parallel connector design that provides improved bidirectional data transmission. Similar to EPP, ECP uses direct memory access to transfer data and often improves performance.EIDE — enhanced integrated device electronics — An improved version of the IDE interface for hard drives and CD drives.EMI — electromagnetic interference — Electrical interference caused by electromagnetic radiation.ENERGY STAR® — Environmental Protection Agency requirements that decrease the overall consumption of electricity.EPP — enhanced parallel port — A parallel connector design that provides bidirectional data transmission.ESD — electrostatic discharge — A rapid discharge of static electricity. ESD can damage integrated circuits found in computer and communications equipment.expansion card — A circuit board that installs in an expansion slot on the system board in some computers, expanding the capabilities of the computer. Examples include video, modem, and sound cards.expansion slot — A connector on the system board (in some computers) where you insert an expansion card, connecting it to the system bus.ExpressCard — A removable I/O card adhering to the PCMCIA standard. Modems and network adapters are common types of ExpressCards. ExpressCards support both the PCI Express and USB 2.0 standard.Express Service Code — A numeric code located on a sticker on your Dell™
188 Glossarycomputer. Use the Express Service Code when contacting Dell for assistance. Express Service Code service may not be available in some countries.extended display mode — A display setting that allows you to use a second monitor as an extension of your display. Also referred to as dual display mode.extended PC Card — A PC Card that extends beyond the edge of the PC Card slot when installed.FFahrenheit — A temperature measurement scale where 32° is the freezing point and 212° is the boiling point of water.FBD — fully-buffered DIMM — A DIMM with DDR2 DRAM chips and an Advanced Memory Buffer (AMB) that speeds communication between the DDR2 SDRAM chips and the system.FCC — Federal Communications Commission — A U.S. agency responsible for enforcing communications-related regulations that state how much radiation computers and other electronic equipment can emit.fingerprint reader — A strip sensor that uses your unique fingerprint to authenticate your user identity to help secure your computer. folder — A term used to describe space on a disk or drive where files are organized and grouped. Files in a folder can be viewed and ordered in various ways, such as alphabetically, by date, and by size.format — The process that prepares a drive or disk for file storage. When a drive or disk is formatted, the existing information on it is lost.FSB — front side bus — The data path and physical interface between the processor and RAM.FTP — file transfer protocol — A standard Internet protocol used to exchange files between computers connected to the Internet.GG — gravity — A measurement of weight and force.GB — gigabyte — A measurement of data storage that equals 1024 MB (1,073,741,824 bytes). When used to refer to hard drive storage, the term is often rounded to 1,000,000,000 bytes.GHz — gigahertz — A measurement of frequency that equals one thousand million Hz, or one thousand MHz. The speeds for computer processors, buses, and interfaces
Glossary 189are often measured in GHz.graphics mode — A video mode that can be defined as x horizontal pixels by y vertical pixels by z colors. Graphics modes can display an unlimited variety of shapes and fonts.GUI — graphical user interface — Software that interacts with the user by means of menus, windows, and icons. Most programs that operate on the Windows operating systems are GUIs.Hhard drive — A drive that reads and writes data on a hard disk. The terms hard drive and hard disk are often used interchangeably.heat sink — A metal plate on some processors that helps dissipate heat.hibernate mode — A power management mode that saves everything in memory to a reserved space on the hard drive and then turns off the computer. When you restart the computer, the memory information that was saved to the hard drive is automatically restored.HTTP — hypertext transfer protocol — A protocol for exchanging files between computers connected to the Internet. Hyper-Threading — Hyper-Threading is an Intel technology that can enhance overall computer performance by allowing one physical processor to function as two logical processors, capable of performing certain tasks simultaneously.Hz — hertz — A unit of frequency measurement that equals 1 cycle per second. Computers and electronic devices are often measured in kilohertz (kHz), megahertz (MHz), gigahertz (GHz), or terahertz (THz).IIC — integrated circuit — A semiconductor wafer, or chip, on which thousands or millions of tiny electronic components are fabricated for use in computer, audio, and video equipment. IDE — integrated device electronics — An interface for mass storage devices in which the controller is integrated into the hard drive or CD drive.IEEE 1394 — Institute of Electrical and Electronics Engineers, Inc. — A high-performance serial bus used to connect IEEE 1394-compatible devices, such as digital cameras and DVD players, to the computer. infrared sensor — A port that allows you to transfer data between the computer and infrared-compatible devices without using a cable connection.
190 Glossaryintegrated — Usually refers to components that are physically located on the computer’s system board. Also referred to as built-in.I/O — input/output — An operation or device that enters and extracts data from your computer. Keyboards and printers are I/O devices. I/O address — An address in RAM that is associated with a specific device (such as a serial connector, parallel connector, or expansion slot) and allows the processor to communicate with that device.IrDA — Infrared Data Association — The organization that creates international standards for infrared communications.IRQ — interrupt request — An electronic pathway assigned to a specific device so that the device can communicate with the processor. Each device connection must be assigned an IRQ. Although two devices can share the same IRQ assignment, you cannot operate both devices simultaneously.ISP — Internet service provider — A company that allows you to access its host server to connect directly to the Internet, send and receive e-mail, and access websites. The ISP typically provides you with a software package, user name, and access phone numbers for a fee. KKb — kilobit — A unit of data that equals 1024 bits. A measurement of the capacity of memory integrated circuits.KB — kilobyte — A unit of data that equals 1024 bytes but is often referred to as 1000 bytes.key combination — A command requiring you to press multiple keys at the same time.kHz — kilohertz — A measurement of frequency that equals 1000 Hz.LLAN — local area network — A computer network covering a small area. A LAN usually is confined to a building or a few nearby buildings. A LAN can be connected to another LAN over any distance through telephone lines and radio waves to form a wide area network (WAN).LCD — liquid crystal display — The technology used by portable computer and flat-panel displays.LED — light-emitting diode — An electronic component that emits light to indicate the status of the computer.
Glossary 191local bus — A data bus that provides a fast throughput for devices to the processor.LPT — line print terminal — The designation for a parallel connection to a printer or other parallel device. MMb — megabit — A measurement of memory chip capacity that equals 1024 Kb.Mbps — megabits per second — One million bits per second. This measurement is typically used for transmission speeds for networks and modems.MB — megabyte — A measurement of data storage that equals 1,048,576 bytes. 1 MB equals 1024 KB. When used to refer to hard drive storage, the term is often rounded to 1,000,000 bytes.MB/sec — megabytes per second — One million bytes per second. This measurement is typically used for data transfer ratings.media bay — A bay that supports devices such as optical drives, a second battery, or a Dell TravelLite™ module.memory — A temporary data storage area inside your computer. Because the data in memory is not permanent, it is recommended that you frequently save your files while you are working on them, and always save your files before you shut down the computer. Your computer can contain several different forms of memory, such as RAM, ROM, and video memory. Frequently, the word memory is used as a synonym for RAM.memory address — A specific location where data is temporarily stored in RAM.memory mapping — The process by which the computer assigns memory addresses to physical locations at start-up. Devices and software can then identify information that the processor can access.memory module — A small circuit board containing memory chips, which connects to the system board.MHz — megahertz — A measure of frequency that equals 1 million cycles per second. The speeds for computer processors, buses, and interfaces are often measured in MHz.Mini PCI — A standard for integrated peripheral devices with an emphasis on communications such as modems and NICs. A Mini PCI card is a small external card that is functionally equivalent to a standard PCI expansion card.Mini-Card — A small card designed for integrated peripherals, such as communication NICs. The Mini-Card is functionally equivalent to a standard PCI expansion card.Mobile Broadband network — (also known as a WWAN) is a series of interconnected
192 Glossarycomputers that communicate with each other through wireless cellular technology and provides Internet access in the same varied locations from which cellular telephone service is available. Your computer can maintain the Mobile Broadband network connection regardless of its physical location, as long as the computer remains in the service area of your cellular service provider.modem — A device that allows your computer to communicate with other computers over analog telephone lines. Three types of modems include: external, PC Card, and internal. You typically use your modem to connect to the Internet and exchange e-mail.module bay — See media bay.MP — megapixel — A measure of image resolution used for digital cameras.ms — millisecond — A measure of time that equals one thousandth of a second. Access times of storage devices are often measured in ms.Nnetwork adapter — A chip that provides network capabilities. A computer may include a network adapter on its system board, or it may contain a PC Card with an adapter on it. A network adapter is also referred to as a NIC (network interface controller).NIC — See network adapter.notification area — The section of the Windows taskbar that contains icons for providing quick access to programs and computer functions, such as the clock, volume control, and print status. Also referred to as system tray.ns — nanosecond — A measure of time that equals one billionth of a second.NVRAM — nonvolatile random access memory — A type of memory that stores data when the computer is turned off or loses its external power source. NVRAM is used for maintaining computer configuration information such as date, time, and other system setup options that you can set.Ooptical drive — A drive that uses optical technology to read or write data from CDs, DVDs, or DVD+RWs. Example of optical drives include CD drives, DVD drives, CD-RW drives, and CD-RW/DVD combo drives.
Glossary 193Pparallel connector — An I/O port often used to connect a parallel printer to your computer. Also referred to as an LPT port.partition — A physical storage area on a hard drive that is assigned to one or more logical storage areas known as logical drives. Each partition can contain multiple logical drives.PC Card — A removable I/O card adhering to the PCMCIA standard. Modems and network adapters are common types of PC Cards.PCI — peripheral component interconnect — PCI is a local bus that supports 32-and 64-bit data paths, providing a high-speed data path between the processor and devices such as video, drives, and networks.PCI Express — A modification to the PCI interface that boosts the data transfer rate between the processor and the devices attached to it. PCI Express can transfer data at speeds from 250 MB/sec to 4 GB/sec. If the PCI Express chip set and the device are capable of different speeds, they will operate at the slower speed.PCMCIA — Personal Computer Memory Card International Association — The organization that establishes standards for PC Cards.PIO — programmed input/output — A method of transferring data between two devices through the processor as part of the data path.pixel — A single point on a display screen. Pixels are arranged in rows and columns to create an image. A video resolution, such as 800 x 600, is expressed as the number of pixels across by the number of pixels up and down.Plug-and-Play — The ability of the computer to automatically configure devices. Plug and Play provides automatic installation, configuration, and compatibility with existing hardware if the BIOS, operating system, and all devices are Plug and Play compliant.POST — power-on self-test — Diagnostics programs, loaded automatically by the BIOS, that perform basic tests on the major computer components, such as memory, hard drives, and video. If no problems are detected during POST, the computer continues the start-up.processor — A computer chip that interprets and executes program instructions. Sometimes the processor is referred to as the CPU (central processing unit).PS/2 — personal system/2 — A type of connector for attaching a PS/2-compatible keyboard, mouse, or keypad.PXE — pre-boot execution environment — A WfM (Wired for Management) standard that allows networked computers that do not have an operating system to be configured and started remotely.
194 GlossaryRRAID — redundant array of independent disks — A method of providing data redundancy. Some common implementations of RAID include RAID 0, RAID 1, RAID 5, RAID 10, and RAID 50.RAM — random-access memory — The primary temporary storage area for program instructions and data. Any information stored in RAM is lost when you shut down your computer.readme file — A text file included with a software package or hardware product. Typically, readme files provide installation information and describe new product enhancements or corrections that have not yet been documented.read-only — Data and/or files you can view but cannot edit or delete. A file can have read-only status if:• It resides on a physically write-protected floppy disk, CD, or DVD.• It is located on a network in a directory and the system administrator has assigned rights only to specific individuals.refresh rate — The frequency, measured in Hz, at which your screen's horizontal lines are recharged (sometimes also referred to as its vertical frequency). The higher the refresh rate, the less video flicker can be seen by the human eye.resolution — The sharpness and clarity of an image produced by a printer or displayed on a monitor. The higher the resolution, the sharper the image.RFI — radio frequency interference — Interference that is generated at typical radio frequencies, in the range of 10 kHz to 100,000 MHz. Radio frequencies are at the lower end of the electromagnetic frequency spectrum and are more likely to have interference than the higher frequency radiations, such as infrared and light.ROM — read-only memory — Memory that stores data and programs that cannot be deleted or written to by the computer. ROM, unlike RAM, retains its contents after you shut down your computer. Some programs essential to the operation of your computer reside in ROM.RPM — revolutions per minute — The number of rotations that occur per minute. Hard drive speed is often measured in rpm.RTC — real time clock — Battery-powered clock on the system board that keeps the date and time after you shut down the computer.RTCRST — real-time clock reset — A jumper on the system board of some computers that can often be used for troubleshooting problems.
Glossary 195SSAS — serial attached SCSI — A faster, serial version of the SCSI interface (as opposed to the original SCSI parallel architecture).SATA — serial ATA — A faster, serial version of the ATA (IDE) interface.ScanDisk — A Microsoft utility that checks files, folders, and the hard disk’s surface for errors. ScanDisk often runs when you restart the computer after it has stopped responding.SCSI — small computer system interface — A high-speed interface used to connect devices to a computer, such as hard drives, CD drives, printers, and scanners. The SCSI can connect many devices using a single controller. Each device is accessed by an individual identification number on the SCSI controller bus.SDRAM — synchronous dynamic random-access memory — A type of DRAM that is synchronized with the optimal clock speed of the processor.serial connector — An I/O port often used to connect devices such as a handheld digital device or digital camera to your computer.Service Tag — A bar code label on your computer that identifies your computer when you access Dell Support at support.dell.com or when you call Dell for customer service or technical support.setup program — A program that is used to install and configure hardware and software. The setup.exe or install.exe program comes with most Windows software packages. Setup program differs from system setup.shortcut — An icon that provides quick access to frequently used programs, files, folders, and drives. When you place a shortcut on your Windows desktop and double-click the icon, you can open its corresponding folder or file without having to find it first. Shortcut icons do not change the location of files. If you delete a shortcut, the original file is not affected. Also, you can rename a shortcut icon.SIM — Subscriber Identity Module — A SIM card contains a microchip that encrypts voice and data transmissions. SIM cards can be used in phones or portable computers.smart card — A card that is embedded with a processor and a memory chip. Smart cards can be used to authenticate a user on computers equipped for smart cards.S/PDIF — Sony/Philips Digital Interface — An audio transfer file format that allows the transfer of audio from one file to another without converting it to and from an analog format, which could degrade the quality of the file.standby mode — A power management mode that shuts down all unnecessary computer operations to save energy.Strike Zone™ — Reinforced area of the platform base that protects the hard drive by acting as a dampening device when a computer experiences resonating shock or is
196 Glossarydropped (whether the computer is on or off).surge protectors — Prevent voltage spikes, such as those that may occur during an electrical storm, from entering the computer through the electrical outlet. Surge protectors do not protect against lightning strikes or against brownouts, which occur when the voltage drops more than 20 percent below the normal AC-line voltage level.Network connections cannot be protected by surge protectors. Always disconnect the network cable from the network connector during electrical storms.SVGA — super-video graphics array — A video standard for video cards and controllers. Typical SVGA resolutions are 800 x 600 and 1024 x 768.
Glossary 197The number of colors and resolution that a program displays depends on the capabilities of the monitor, the video controller and its drivers, and the amount of video memory installed in the computer.S-video TV-out — A connector used to attach a TV or digital audio device to the computer.SXGA — super-extended graphics array — A video standard for video cards and controllers that supports resolutions up to 1280 x 1024.SXGA+ — super-extended graphics array plus — A video standard for video cards and controllers that supports resolutions up to 1400 x 1050.system board — The main circuit board in your computer. Also known as the motherboard.system setup — A utility that serves as an interface between the computer hardware and the operating system. System setup allows you to configure user-selectable options in the BIOS, such as date and time or system password. Unless you understand what effect the settings have on the computer, do not change the settings for this program.TTAPI — telephony application programming interface — Enables Windows programs to operate with a wide variety of telephony devices, including voice, data, fax, and video.text editor — A program used to create and edit files that contain only text; for example, Windows Notepad uses a text editor. Text editors do not usually provide word wrap or formatting functionality (the option to underline, change fonts, and so on).TPM — trusted platform module — A hardware-based security feature that when combined with security software enhances network and computer security by enabling features such as file and e-mail protection.travel module — A plastic device designed to fit inside the module bay of a portable computer to reduce the weight of the computer.UUAC — user account control— Microsoft Windows® Vista™ security feature that, when enabled, provides an added layer of security between user accounts and access to operating system settings.UMA — unified memory allocation — System memory dynamically allocated to
198 Glossaryvideo.UPS — uninterruptible power supply — A backup power source used when the electrical power fails or drops to an unacceptable voltage level. A UPS keeps a computer running for a limited amount of time when there is no electrical power. UPS systems typically provide surge suppression and may also provide voltage regulation. Small UPS systems provide battery power for a few minutes to enable you to shut down your computer.USB — universal serial bus — A hardware interface for a low-speed device such as a USB-compatible keyboard, mouse, joystick, scanner, set of speakers, printer, broadband devices (DSL and cable modems), imaging devices, or storage devices. Devices are plugged directly in to a 4-pin socket on your computer or in to a multi-port hub that plugs in to your computer. USB devices can be connected and disconnected while the computer is turned on, and they can also be daisy-chained together.UTP — unshielded twisted pair — Describes a type of cable used in most telephone networks and some computer networks. Pairs of unshielded wires are twisted to protect against electromagnetic interference, rather than relying on a metal sheath around each pair of wires to protect against interference.UXGA — ultra extended graphics array — A video standard for video cards and controllers that supports resolutions up to 1600 x 1200.Vvideo controller — The circuitry on a video card or on the system board (in computers with an integrated video controller) that provides the video capabilities—in combination with the monitor—for your computer.video memory — Memory that consists of memory chips dedicated to video functions. Video memory is usually faster than system memory. The amount of video memory installed primarily influences the number of colors that a program can display.video mode — A mode that describes how text and graphics are displayed on a monitor. Graphics-based software, such as Windows operating systems, displays in video modes that can be defined as x horizontal pixels by y vertical pixels by z colors. Character-based software, such as text editors, displays in video modes that can be defined as x columns by y rows of characters.video resolution — See resolution.virus — A program that is designed to inconvenience you or to destroy data stored on your computer. A virus program moves from one computer to another through an infected disk, software downloaded from the Internet, or e-mail attachments. When an infected program starts, its embedded virus also starts.
Glossary 199A common type of virus is a boot virus, which is stored in the boot sectors of a floppy disk. If the floppy disk is left in the drive when the computer is shut down and then turned on, the computer is infected when it reads the boot sectors of the floppy disk expecting to find the operating system. If the computer is infected, the boot virus may replicate itself onto all the floppy disks that are read or written in that computer until the virus is eradicated.V — volt — The measurement of electric potential or electromotive force. One V appears across a resistance of 1 ohm when a current of 1 ampere flows through that resistance.WW — watt — The measurement of electrical power. One W is 1 ampere of current flowing at 1 volt.WHr — watt-hour — A unit of measure commonly used to indicate the approximate capacity of a battery. For example, a 66-WHr battery can supply 66 W of power for 1 hour or 33 W for 2 hours.wallpaper — The background pattern or picture on the Windows desktop. Change your wallpaper through the Windows Control Panel. You can also scan in your favorite picture and make it wallpaper.WLAN — wireless local area network. A series of interconnected computers that communicate with each other over the air waves using access points or wireless routers to provide Internet access.write-protected — Files or media that cannot be changed. Use write-protection when you want to protect data from being changed or destroyed. To write-protect a 3.5-inch floppy disk, slide its write-protect tab to the open position.WPAN — wireless personal area network. A computer network used for communica-tion among computer devices (including telephones and personal digital assistants) close to one person.WWAN — wireless wide area network. A wireless high-speed data network using cellular technology and covering a much larger geographic area than WLAN. WXGA — wide-aspect extended graphics array — A video standard for video cards and controllers that supports resolutions up to 1280 x 800."XXGA — extended graphics array — A video standard for video cards and controllers that supports resolutions up to 1024 x 768.
200 GlossaryZZIF — zero insertion force — A type of socket or connector that allows a computer chip to be installed or removed with no stress applied to either the chip or its socket.Zip — A popular data compression format. Files that have been compressed with the Zip format are called Zip files and usually have a filename extension of .zip. A special kind of zipped file is a self-extracting file, which has a filename extension of .exe. You can unzip a self-extracting file by double-clicking it.Zip drive — A high-capacity floppy drive developed by Iomega Corporation that uses 3.5-inch removable disks called Zip disks. Zip disks are slightly larger than regular floppy disks, about twice as thick, and hold up to 100 MB of data.
Index 201IndexNumerics8-in-1 memory card reader, 83Aaudio deviceconnecting, 59enabling, 74audio. See soundBbatterycharging, 48checking the charge, 46performance, 45power meter, 47removing, 49storing, 50blank cardsExpressCards, 82memory card, 83removing, 83, 85Bluetooth wireless technology carddevice status light, 23installing, 153Blu-ray Disc, 57boot sequence, 176brightnessadjusting, 37Ccamera, 20carnet, 156CDblank, 55CD-RW drive problems, 107drive problems, 106Check Disk, 107cleaningtouch pad, 178computercrashes, 117-118restore to previous operating state, 132slow performance, 109, 119specifications, 165stops responding, 117connectingaudio device, 59Mobile Broadband network, 92TV, 59copying CDshelpful tips, 56how to, 55copying DVDs
202 Indexhelpful tips, 56how to, 55DDell Diagnosticsabout, 101starting from the Drivers and Utilities media, 102starting from your hard drive, 101Dell MediaDirectabout, 23problems, 118Dell support site, 16DellConnect, 158Device Driver Rollback, 129device latch releasedescription, 30device status lightsdescription, 22diagnosticsDell, 101digital array microphones, 24displayadjusting brightness, 37description, 20resolution, 37switching the video image, 37documentationEnd User License Agreement, 14ergonomics, 14online, 16Product Information Guide, 14regulatory, 14safety, 14warranty, 14Dolby headphones, setting up, 75driversabout, 127identifying, 128reinstalling, 128Drivers and Utilities CDDell Diagnostics, 101Drivers and Utilities media, 13about, 129drivesproblems, 106See also hard driveSee also optical driveDVDblank, 55drive problems, 106EEnd User License Agreement, 14ergonomics information, 14error messages, 109ExpressCard slotdescription, 28ExpressCards, 81blanks, 82-83installing, 82
Index 203removing, 83FFCM. See Flash Cache ModuleFlash Cache Module, 152Hhard driveproblems, 107replacing, 137returning to Dell, 139hardwareDell Diagnostics, 101Hardware Troubleshooter, 131hinge coverremoving, 141IIEEE 1394 connectordescription, 27problems, 115Internet connectionabout, 31options, 31setting up, 32Kkeyboardnumeric keypad, 39problems, 115removing, 142shortcuts, 40keyboard status lightsdescription, 24keypadnumeric, 39LlabelsMicrosoft Windows, 15Service Tag, 15lost computer, 98Mmediaplaying, 51media control buttonsDell MediaDirect button, 58description, 20media memory cards, 83installing, 84reader, 21types, 83memoryinstalling, 144removing, 145memory cardblanks, 83
204 Indexmemory card reader, 83memory cardsblanks, 85removing, 85messageserror, 109microphonedirectional, 77Mini Cardinstalling, 148WLAN, 148WPAN, 148WWAN, 148Mobile Broadbandnetwork connections, 92See also wireless switchMobile Broadband (WWAN)problems, 120modem connectordescription, 30monitor. See displayNnetworkinstalling WLAN Mini Card, 148Mobile Broadband (WWAN), 120problems, 120network connectordescription, 26Ooperating systemreinstalling Windows Vista, 132Ppowerline conditioners, 35problems, 121protection devices, 35surge protectors, 35UPS, 35power buttondescription, 20power lightconditions, 121printercable, 34connecting, 33problems, 122setting up, 33USB, 34problemsblue screen, 118CD drive, 106CD-RW drive, 107computer crashes, 117-118computer does not start up, 117computer stops responding, 117Dell Diagnostics, 101Dell MediaDirect, 118drives, 106DVD drive, 106
Index 205error messages, 109hard drive, 107IEEE 1394 connector, 115keyboard, 115lockups, 117network, 120power, 121power light conditions, 121printer, 122program crashes repeatedly, 117program stops responding, 117programs and Windows compatibility, 117restore computer to previous operating state, 132restore operating system to previous state, 131scanner, 123slow computer performance, 109, 119software, 117-118sound and speakers, 124speakers, 124spyware, 109, 119Product Information Guide, 14QQuickSet Help, 17RRAM. See memoryregulatory information, 14reinstallingWindows Vista, 132resolutionsetting, 37SS/PDIF digital audioenabling, 74Safely Remove Hardware icon, 114safety instructions, 14scannerproblems, 123screen. See displaysecurity cable slotdescription, 25Service Tag, 15SIM. See Subscriber Identity Modulesoftwareproblems, 117-118software and hardware incompatibilities, 131soundproblems, 124volume, 124speakersproblems, 124volume, 124specifications, 165
206 Indexspyware, 109, 119stolen computer, 98Subscriber Identity Module, 147support website, 16S-video TV-out connectordescription, 29System Restore, 131-132system setup programcommonly used options, 176screens, 176viewing, 176TtaskbarDell Mobile Broadband Card Utility, 121Dell Support Utility, 17Safely Remove Hardware, 114wireless activity indicator, 92touch pad, 41cleaning, 178customizing, 42touch pad buttonsdescription, 22track stick/touch pad buttonsdescription, 21transferring information to a new computer, 33traveling with the computerby air, 156identification tag, 155packing, 155tips, 156troubleshootingDell Diagnostics, 101Hardware Troubleshooter, 131restore computer to previous operating state, 131-132TVconnecting, 59Uuninterruptible power supply. See UPSUPS, 35Vvideoproblems, 126video controllerdetermining configuration, 19volumeadjusting, 124Wwarranty information, 14Windows Easy Transfer wizard, 33Windows VistaDevice Driver Rollback, 129
Index 207Program Compatibility wizard, 117reinstalling, 132System Restore, 131-132Windows Easy Transfer wizard, 33wizardsProgram Compatibility wizard, 117Windows Easy Transfer, 33WLANinstalling Mini Card, 148WWANSee also Mobile Broadband
208 Index

Navigation menu