Broadcom BRCM1030 802.11g WLAN PCI-E Mini Card User Manual BixbyUG Manual

Broadcom Corporation 802.11g WLAN PCI-E Mini Card BixbyUG Manual

BixbyUG Manual

Download:
Mirror Download [FCC.gov]
Document ID	1091028
Application ID	HOrxS1kF5ekzTEek0D+ZPw==
Document Description	BixbyUG Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	301.09kB (3763620 bits)
Date Submitted	2009-04-03 00:00:00
Date Available	2009-09-19 00:00:00
Creation Date	2009-02-03 19:27:52
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-02-03 20:20:54
Document Title	BixbyUG Manual
Document Creator	XSL Formatter V3.4 MR5a (3,4,2006,0718) for Windows : Windows Evaluation
Document Author:	gibsono

Mini User Guide
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
© Copyright 2009 Hewlett-Packard
Development Company, L.P.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Product notice
This user guide describes features that are
common to most models. Some features
may not be available on your device.
To obtain the latest information in the Mini
User Guide, go to the HP Web site at
http://www.hp.com/support.
First Edition: May 2009
Document Part Number: 530935-001
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place
the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface.
Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows
or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface,
such as pillows or rugs or clothing, during operation. The device and the AC adapter comply with the
user-accessible surface temperature limits defined by the International Standard for Safety of
Information Technology Equipment (IEC 60950).
iii
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
iv
Safety warning notice
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Table of contents
1 Knowing the parts
Identifying the hardware ....................................................................................................................... 1
Top components .................................................................................................................. 1
TouchPad ............................................................................................................ 1
Light .................................................................................................................... 2
Keys .................................................................................................................... 2
Front components ................................................................................................................ 3
Right-side components ........................................................................................................ 4
Left-side components .......................................................................................................... 5
Display components ............................................................................................................ 6
Bottom components ............................................................................................................. 7
Wireless antennas ............................................................................................................... 8
Additional hardware components ........................................................................................ 8
Identifying the labels ............................................................................................................................. 9
2 Power management
Setting power options ......................................................................................................................... 10
Using power-saving states ................................................................................................. 10
Initiating and exiting Standby ............................................................................ 10
Initiating and exiting Hibernation ....................................................................... 10
Using power schemes ....................................................................................................... 11
Viewing the current scheme .............................................................................. 11
Selecting a different power scheme .................................................................. 11
Customizing power schemes ............................................................................ 12
Setting password protection upon exiting Standby ............................................................ 12
Using external AC power .................................................................................................................... 12
Connecting the AC adapter ............................................................................................... 13
Using battery power ........................................................................................................................... 13
Displaying the remaining battery charge ........................................................................... 14
Inserting or removing the battery ....................................................................................... 14
Charging a battery ............................................................................................................. 15
Maximizing battery discharge time .................................................................................... 16
Managing low battery levels .............................................................................................. 16
Identifying low battery levels ............................................................................. 16
Resolving a low battery level ............................................................................. 17
Resolving a low battery level when external power is available ....... 17
Resolving a low battery level when a charged battery is
available ........................................................................................... 17
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Resolving a low battery level when no power source is
available ........................................................................................... 17
Resolving a low battery level when the device cannot exit
Hibernation ....................................................................................... 17
Calibrating a battery ........................................................................................................... 17
Step 1: Fully charge the battery ........................................................................ 17
Step 2: Disable Hibernation and Standby ......................................................... 18
Step 3: Discharge the battery ............................................................................ 18
Step 4: Fully recharge the battery ..................................................................... 19
Step 5: Reenable Hibernation and Standby ...................................................... 19
Conserving battery power .................................................................................................. 19
Storing a battery ................................................................................................................ 19
Disposing of a used battery ............................................................................................... 19
Shutting down the device ................................................................................................................... 20
3 Internet
Connecting to a wired network ........................................................................................................... 21
Connecting to a wireless network ....................................................................................................... 22
Using wireless devices ...................................................................................................... 22
Identifying wireless and network status icons ................................................... 22
Using the wireless controls ............................................................................... 23
Using the wireless switch .................................................................................. 23
Using HP Connection Manager software (select models only) ......................... 23
Using HP Wireless Assistant software .............................................................. 24
Using a WLAN ................................................................................................................... 24
Setting up a WLAN ............................................................................................ 25
Protecting your WLAN ....................................................................................... 25
Connecting to a WLAN ...................................................................................... 26
Roaming to another network ............................................................................. 27
Using HP Mobile Broadband (select models only) ............................................................................. 27
Inserting a SIM ................................................................................................................... 28
Removing a SIM ................................................................................................................ 29
Using the HP Mobile Broadband Setup Utility (select models only) ................................................... 29
4 Multimedia
Multimedia features ............................................................................................................................ 30
Identifying your multimedia components ........................................................................... 30
Adjusting the volume ......................................................................................................... 31
Multimedia software ........................................................................................................................... 32
Using other preinstalled multimedia software .................................................................... 33
Installing multimedia software from the Internet ................................................................ 33
Audio .................................................................................................................................................. 33
Connecting external audio devices .................................................................................... 33
vi
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Checking your audio functions ........................................................................................... 33
Video .................................................................................................................................................. 34
Connecting an external monitor or projector ...................................................................... 34
Webcam ............................................................................................................................................. 35
5 Security
Protecting the device .......................................................................................................................... 36
Using passwords ................................................................................................................................ 36
Passwords set in Windows ................................................................................................ 37
Passwords set in Setup Utility ........................................................................................... 37
Administrator password ..................................................................................... 38
Managing an administrator password ............................................... 38
Entering an administrator password ................................................. 38
Power-on password .......................................................................................... 38
Managing a power-on password ...................................................... 39
Entering a power-on password ......................................................... 39
Using antivirus software ..................................................................................................................... 39
Using firewall software ....................................................................................................................... 39
Installing critical updates .................................................................................................................... 40
6 Digital cards
Inserting a digital card ........................................................................................................................ 41
Stopping and removing a digital card ................................................................................................. 42
7 USB devices
Using a USB device ........................................................................................................................... 43
Connecting a USB device .................................................................................................. 43
Stopping and removing a USB device ............................................................................... 43
8 Pointing devices and keyboard
Setting pointing device preferences ................................................................................................... 45
Using pointing devices ....................................................................................................................... 45
Using the TouchPad .......................................................................................................... 45
Connecting an external mouse .......................................................................................... 45
Using the keyboard ............................................................................................................................ 45
Using hotkeys .................................................................................................................... 45
Initiating Standby (fn+f1) ................................................................................... 46
Switching the screen image (fn+f2) ................................................................... 47
Decreasing screen brightness (fn+f3) ............................................................... 47
Increasing screen brightness (fn+f4) ................................................................. 47
Initiating QuickLock (fn+f6) ................................................................................ 47
Muting speaker sound (fn+f8) ........................................................................... 47
Decreasing speaker sound (fn+f10) .................................................................. 48
vii
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Increasing speaker sound (fn+f11) .................................................................... 48
9 Drives
Identifying installed drives .................................................................................................................. 49
Handling drives ................................................................................................................................... 49
Using external drives .......................................................................................................................... 49
Using optional external devices ......................................................................................... 50
10 Memory modules
11 Updating software
Updating the BIOS ............................................................................................................................. 54
Determining the BIOS version ........................................................................................... 54
Downloading a BIOS update ............................................................................................. 55
Updating programs and drivers .......................................................................................................... 56
12 Setup Utility
Starting the Setup Utility ..................................................................................................................... 57
Using the Setup Utility ........................................................................................................................ 57
Changing the language of the Setup Utility ....................................................................... 57
Navigating and selecting in the Setup Utility ...................................................................... 57
Displaying system information ........................................................................................... 58
Restoring default settings in the Setup Utility .................................................................... 58
Exiting the Setup Utility ...................................................................................................... 58
Setup Utility menus ............................................................................................................................ 58
Main menu ......................................................................................................................... 59
Security menu .................................................................................................................... 59
System Configuration menu .............................................................................................. 59
Diagnostics menu .............................................................................................................. 60
Index ................................................................................................................................................................... 61
viii
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
1
Knowing the parts
Identifying the hardware
Components included with the device may vary by region and model. The illustrations in this chapter
identify the standard features on most device models.
To see a list of hardware installed in the device, follow these steps:
1.
Select Start > My Computer.
2.
In the left pane of the System Tasks window, select View system information.
3.
Select Hardware tab > Device Manager.
You can also add hardware or modify device configurations using Device Manager.
Top components
TouchPad
Component
Description
(1)
Left TouchPad button*
Functions like the left button on an external mouse.
(2)
TouchPad*
Moves the pointer and selects or activates items on the
screen.
(3)
TouchPad scroll zone
Scrolls up or down.
(4)
Right TouchPad button*
Functions like the right button on an external mouse.
*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Printers
and Other Hardware > Mouse.
Identifying the hardware
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Light
Component
Description
Caps lock light
On: Caps lock is on.
Keys
Component
(1)
Description
Function keys
Chapter 1 Knowing the parts
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Execute frequently used system functions when
pressed in combination with the fn key.
Component
Description
(2)
fn key
Executes frequently used system functions when
pressed in combination with a function key.
(3)
Windows® logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the
pointer.
Front components
Component
(1)
(2)
Description
Power light
Power switch
●
On: The device is on.
●
Blinking: The device is in Standby.
●
Off: The device is off or in Hibernation.
●
When the device is off, slide the switch to turn
on the device.
●
When the device is on, briefly slide the switch to
initiate Hibernation.
●
When the device is in Standby, briefly slide the
switch to exit Standby.
●
When the device is in Hibernation, briefly slide
the switch to exit Hibernation.
If the device has stopped responding and Windows
shutdown procedures are ineffective, slide and hold
the power switch for at least 5 seconds to turn off the
device.
To learn more about your power settings, select
Start > Control Panel > Performance and
Maintenance > Power Options.
(3)
Drive light
Blinking: The hard drive or flash drive is being
accessed.
Identifying the hardware
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Component
(4)
(5)
(6)
Description
Battery light
Wireless light
Wireless switch
●
On: A battery is charging.
●
Blinking: A battery that is the only available
power source has reached a low battery level.
When the battery reaches a critical battery level,
the battery light begins blinking rapidly.
●
Off: If the device is plugged into an external
power source, the light turns off when all
batteries in the device are fully charged. If the
device is not plugged into an external power
source, the light stays off until the battery
reaches a low battery level.
●
Blue: An integrated wireless device, such as a
wireless local area network (WLAN) device, is
on.
●
Amber: All wireless devices are off.
Turns the wireless feature on or off, but does not
establish a wireless connection.
NOTE: A wireless network must be set up in order
to establish a wireless connection.
Right-side components
Component
Description
(1)
USB ports (2)
Connect optional USB devices.
(2)
Digital Media Slot
Supports the following optional digital card formats:
●
Memory stick (MS)
●
MS/Pro
●
MultiMediaCard (MMC)
●
Secure Digital (SD) Memory Card
●
xD-Picture card
(3)
External monitor port
Connects an optional external display, such as a
monitor or projector, to the device.
(4)
RJ-45 (network) jack
Connects a network cable.
Chapter 1 Knowing the parts
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Left-side components
Component
(1)
Description
Security cable slot
Attaches an optional security cable to the device.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the device from being
mishandled or stolen.
(2)
Power connector
Connects an AC adapter.
(3)
Vent
Enables airflow to cool internal components.
NOTE: The device fan starts up automatically to
cool internal components and prevent overheating. It
is normal for the internal fan to cycle on and off during
routine operation.
(4)
USB port
Connects an optional USB device.
(5)
Audio-out (headphones) jack/Audio-in (microphone)
jack
Produces sound when connected to optional powered
stereo speakers, headphones, earbuds, a headset, or
television audio. Also connects an optional headset
microphone.
WARNING! To reduce the risk of personal injury,
adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety
information, refer to the Regulatory, Safety and
Environmental Notices.
NOTE: When an audio component is connected to
the jack, the device speakers are disabled.
The audio component cable must have a 4–conductor
connector.
Identifying the hardware
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Display components
Component
Description
(1)
Speakers (2)
Produce sound.
(2)
Internal display switch
Turns off the display if the display is closed while the
power is on.
NOTE: The display switch is not visible from the
outside of the device.
(3)
Webcam
Captures still photographs and videos.
NOTE: To capture videos, you will need to install
additional webcam software.
(4)
Webcam light
On: The webcam is in use.
(5)
Internal microphone
Records sound.
Chapter 1 Knowing the parts
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Bottom components
Component
Description
(1)
Battery bay
Holds the battery.
(2)
Battery release latches (2)
Release the battery from the battery bay.
(3)
Vent
Enables airflow to cool internal components.
NOTE: The device fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(4)
Memory module compartment
Contains the memory module slot.
Identifying the hardware
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Wireless antennas
Component
Description
(1)
WWAN antennas (2) (select models only)*
Send and receive wireless signals to communicate with wireless
wide-area networks (WWANs).
(2)
WLAN antennas (2)*
Send and receive wireless signals to communicate with wireless
local area networks (WLANs).
*The antennas are not visible from the outside of the device. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental
Notices that applies to your country or region. To access these notices, click Start > Help and
Support > User Guides.
Additional hardware components
Chapter 1 Knowing the parts
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Component
Description
(1)
Power cord*
Connects an AC adapter to an AC outlet.
(2)
AC adapter
Converts AC power to DC power.
(3)
Battery*
Powers the device when the device is not plugged into external
power.
*Batteries and power cords vary in appearance by region and country.
Identifying the labels
The labels affixed to the device provide information you may need when you troubleshoot system
problems or travel internationally with the device.
●
Service tag—Provides important information including the following:
◦
Product name (1). This is the product name affixed to the front of your device.
◦
Serial number (s/n) (2). This is an alphanumeric identifier that is unique to each product.
◦
Part Number/Product number (p/n) (3). This number provides specific information about the
hardware components of the product. The part number helps a service technician to determine
what components and parts are needed.
◦
Model description (4). This is the alphanumeric identifier you use to locate documents, drivers,
and support for your device.
◦
Warranty period (5). This number describes the duration (in years) of the warranty period for
this device.
Have this information available when you contact technical support. The service tag label is affixed
to the bottom of the device.
●
Microsoft® Certificate of Authenticity—Contains the Windows® Product Key. You may need the
Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom
of the device.
●
Regulatory label—Provides regulatory information about the device, including the following:
◦
Information about optional wireless devices and the approval markings of some of the
countries or regions in which the devices have been approved for use. An optional device may
be a wireless local area network (WLAN) device. You may need this information when
traveling internationally.
◦
The serial number of your HP Mobile Broadband Module (select models only).
The regulatory label is affixed inside the battery bay.
Is the reg label located inside the battery bay or on the bottom of the unit?
Identifying the labels
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
2
Power management
Setting power options
Using power-saving states
The device has two power-saving states enabled at the factory: Standby and Hibernation.
When Standby is initiated, the power light blinks and the screen clears. Your work is saved to memory.
Exiting Standby is faster than exiting Hibernation. If the device is in Standby for an extended period or
if the battery reaches a critical battery level while in Standby, the device initiates Hibernation.
When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the device
turns off.
CAUTION: To prevent possible audio and video degradation, loss of audio or video playback
functionality, or loss of information, do not initiate Standby or Hibernation while reading from or writing
to a disc or an external media card.
NOTE: You cannot initiate any type of networking connection or perform any device functions while
the device is in Standby or in Hibernation.
Initiating and exiting Standby
The system is set at the factory to initiate Standby after 10 minutes of inactivity when running on battery
power and 25 minutes of inactivity when running on external power.
Power settings and timeouts can be changed using Power Options in Windows Control Panel.
With the device on, you can initiate Standby in any of the following ways:
●
Press fn+f1.
●
Click Start > Turn Off Computer > Stand By.
To exit Standby:
▲
Briefly slide the power switch.
When the device exits Standby, the power light turns on and your work returns to the screen where
you stopped working.
NOTE: If you have set a password to be required when the device exits Standby, you must enter your
Windows password before your work will return to the screen.
Initiating and exiting Hibernation
The system is set at the factory to initiate Hibernation after 30 minutes of inactivity when running on
battery power or when the battery reaches a critical battery level.
NOTE:
The system will not initiate Hibernation when running on external power.
NOTE:
To reduce the risk of information loss, periodically save your work.
Power settings and timeouts can be changed using Power Options in Windows Control Panel.
10
Chapter 2 Power management
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To initiate Hibernation:
1.
Select Start > Turn Off Computer.
2.
Hold down the shift key and select Hibernate.
– or –
▲
If the device is on, briefly slide the power switch.
To exit Hibernation:
▲
Briefly slide the power switch.
When the device exits Hibernation, the power light turns on and your work returns to the screen where
you stopped working.
NOTE: If you have set a password to be required when the device exits Hibernation, you must enter
your Windows password before your work will return to the screen.
Using power schemes
A power scheme is a collection of system settings that manages how the device uses power. Power
schemes can help you conserve power and maximize device performance.
The following power schemes are available:
●
Portable/Laptop (recommended)
●
Home/Office Desk
●
Presentation
●
Always On
●
Minimal Power Management
●
Max Battery
You can change the settings of these power plans through Power Options.
Viewing the current scheme
▲
Click the Power Meter icon in the notification area, at the far right of the taskbar.
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options.
Selecting a different power scheme
▲
Click the Power Meter icon in the notification area, at the far right of the taskbar, and then select
a power scheme from the list.
– or –
a.
Select Start > Control Panel > Performance and Maintenance > Power Options.
b.
Select a power scheme from the Power schemes list.
c.
Click OK.
Setting power options
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
11
Customizing power schemes
1.
Select Start > Control Panel > Performance and Maintenance > Power Options.
2.
Select a power scheme from the Power schemes list.
3.
Modify the Plugged in and Running on batteries settings as needed.
4.
Click OK.
Setting password protection upon exiting Standby
To set the device to prompt for a password when the device exits Standby, follow these steps:
1.
Right-click the Power Meter icon in the notification area, and then click Adjust Power
Properties.
2.
Click the Advanced tab.
3.
Select the Prompt for password when computer resumes from standby check box.
4.
Click Apply.
Using external AC power
External AC power is supplied through one of the following devices:
WARNING! To reduce potential safety issues, use only the AC adapter provided with the device, a
replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
●
Approved AC adapter
●
Optional docking device or optional expansion product
Connect the device to external AC power under any of the following conditions:
WARNING! Do not charge the device battery while you are onboard aircraft.
●
When you are charging or calibrating a battery
●
When you are installing or modifying system software
●
When you are writing information to a CD or DVD
When you connect the device to external AC power, the following events occur:
●
The battery begins to charge.
●
If the device is turned on, the battery meter icon in the notification area changes appearance.
When you disconnect external AC power, the following events occur:
12
●
The device switches to battery power.
●
The display brightness is automatically decreased to save battery life. To increase display
brightness, press the fn+f4 hotkey or reconnect the AC adapter.
Chapter 2 Power management
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Connecting the AC adapter
WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the device by unplugging the power cord from the AC outlet (not by unplugging
the power cord from the device).
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
To connect the device to external AC power, follow these steps:
1.
Plug the AC adapter into the power connector (1) on the device.
2.
Plug the power cord into the AC adapter (2).
3.
Plug the other end of the power cord into an AC outlet (3).
Using battery power
When a charged battery is in the device and the device is not plugged into external power, the device
runs on battery power. When the device is plugged into external AC power, the device runs on AC
power.
If the device contains a charged battery and is running on external AC power supplied through the AC
adapter, the device switches to battery power if the AC adapter is disconnected from the device.
NOTE: The display brightness is decreased to save battery life when you disconnect AC power. To
increase display brightness, use the fn+f4 hotkey or reconnect the AC adapter.
You can keep a battery in the device or in storage, depending on how you work. Keeping the battery in
the device whenever the device is plugged into AC power charges the battery and also protects your
work in case of a power outage. However, a battery in the device slowly discharges when the device is
off and unplugged from external power.
WARNING! To reduce potential safety issues, use only the battery provided with the device, a
replacement battery provided by HP, or a compatible battery purchased from HP.
Device battery life varies, depending on power management settings, programs running on the device,
display brightness, external devices connected to the device, and other factors.
Using battery power
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
13
Displaying the remaining battery charge
▲
Double-click the Power Meter icon in the notification area, at the far right of the taskbar.
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options > Power
Meter tab.
Most charge indicators report battery status as both a percentage and as the number of minutes of
charge remaining:
●
The percentage indicates the approximate amount of charge remaining in the battery.
●
The time indicates the approximate running time remaining on the battery if the battery continues
to provide power at the current level. For example, the time remaining will decrease when a DVD
is playing and will increase when a DVD stops playing.
When a battery is charging, a lightning bolt icon may be superimposed over the battery icon on the
Power Meter screen.
Inserting or removing the battery
CAUTION: Removing a battery that is the sole power source may cause loss of information. To prevent
loss of information, save your work and initiate Hibernation or shut down the device through Windows
before removing the battery.
To insert the battery:
14
1.
Disconnect all external devices.
2.
If the device is connected to AC power, unplug the power cord from the AC outlet.
3.
Turn the device upside down on a flat surface.
4.
Align the tabs on the battery with the notches on the device, and then insert the battery into the
battery bay. The battery release latches automatically lock the battery into place.
Chapter 2 Power management
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To remove the battery:
1.
Disconnect all external devices.
2.
If the device is connected to AC power, unplug the power cord from the AC outlet.
3.
Turn the device upside down on a flat surface.
4.
Slide the battery release latches (1) to release the battery, and then remove the battery (2).
Charging a battery
WARNING! Do not charge the device battery while you are onboard aircraft.
The battery charges whenever the device is plugged into external power through an AC adapter, an
optional power adapter, an optional docking device, or an optional expansion product.
The battery charges whether the device is off or in use, but it charges faster when the device is off.
Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer
or cooler than room temperature.
To prolong battery life and optimize the accuracy of battery charge displays, follow these
recommendations:
●
If you are charging a new battery, charge it fully before turning on the device.
●
Charge the battery until the battery light turns off.
NOTE: If the device is on while the battery is charging, the battery meter in the notification area
may show 100 percent charge before the battery is fully charged.
●
Allow the battery to discharge below 5 percent of a full charge through normal use before charging
it.
●
If the battery has been unused for one month or more, calibrate the battery instead of simply
charging it.
Using battery power
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
15
The battery light displays charge status:
●
On: The battery is charging.
●
Blinking: The battery that is the only available power source has reached a low battery level. When
the battery reaches a critical battery level, the battery light begins blinking rapidly.
●
Off: The battery is fully charged, in use, or not installed.
Maximizing battery discharge time
Battery discharge time varies depending on the features you use while on battery power. Maximum
discharge time gradually shortens, as the battery storage capacity naturally degrades.
Tips for maximizing battery discharge time:
●
Lower the brightness on the display.
●
Remove the battery from the device when it is not being used or charged.
●
Store the battery in a cool, dry location.
Managing low battery levels
The information in this section describes the alerts and system responses set at the factory. Some lowbattery alerts and system responses can be changed using Power Options in Windows Control Panel.
Preferences set using Power Options do not affect lights.
Identifying low battery levels
When a battery that is the sole power source for the device reaches a low battery level, the battery light
blinks.
If a low battery level is not resolved, the device enters a critical battery level, and the battery light blinks
rapidly.
The device takes the following actions for a critical battery level:
16
●
If Hibernation is enabled and the device is on or in Standby, the device initiates Hibernation.
●
If Hibernation is disabled and the device is on or in Standby, the device remains briefly in Standby,
and then shuts down and loses any unsaved information.
Chapter 2 Power management
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Resolving a low battery level
CAUTION: To reduce the risk of losing information when the device reaches a critical battery level
and has initiated Hibernation, do not restore power until the power lights turn off.
Resolving a low battery level when external power is available
▲
Connect one of the following devices:
●
AC adapter
●
Optional expansion product or docking device
●
Optional power adapter
Resolving a low battery level when a charged battery is available
1.
Turn off the device or initiate Hibernation.
2.
Remove the discharged battery, and then insert a charged battery.
3.
Turn on the device.
Resolving a low battery level when no power source is available
▲
Initiate Hibernation.
– or –
Save your work and shut down the device.
Resolving a low battery level when the device cannot exit Hibernation
When the device lacks sufficient power to exit Hibernation, follow these steps:
1.
Insert a charged battery or plug the device into external power.
2.
Exit Hibernation by briefly sliding the power switch.
Calibrating a battery
Calibrate a battery under the following conditions:
●
When battery charge displays seem inaccurate
●
When you observe a significant change in battery run time
Even if a battery is heavily used, it should not need to be calibrated more than once a month. It is also
not necessary to calibrate a new battery.
Step 1: Fully charge the battery
WARNING! Do not charge the device battery while you are onboard aircraft.
NOTE:
is off.
The battery charges whether the device is off or in use, but it charges faster when the device
Using battery power
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
17
To fully charge the battery:
1.
Insert the battery into the device.
2.
Connect the device to an AC adapter, optional power adapter, optional expansion product, or
optional docking device, and then plug the adapter or device into external power.
The battery light on the device turns on.
3.
Leave the device plugged into external power until the battery is fully charged.
The battery light on the device turns off.
Step 2: Disable Hibernation and Standby
1.
Right-click the Power Meter icon in the notification area, at the far right of the taskbar, and then
click Adjust Power Properties.
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options.
2.
Record the 4 settings listed in the Running on batteries column and the Plugged in column so
that you can reset them after the calibration.
3.
Set the 4 options to Never.
4.
Click OK.
Step 3: Discharge the battery
The device must remain on while the battery is being discharged. The battery can discharge whether
or not you are using the device, but the battery will discharge faster while you are using it.
●
If you plan to leave the device unattended during the discharge, save your information before
beginning the discharge procedure.
●
If you use the device occasionally during the discharge procedure and have set energy-saving
timeouts, expect the following performance from the system during the discharge process:
◦
The monitor will not turn off automatically.
◦
Hard drive speed will not decrease automatically when the device is idle.
◦
System-initiated Hibernation will not occur.
To discharge a battery:
18
1.
Unplug the device from its external power source, but do not turn off the device.
2.
Run the device on battery power until the battery is discharged. The battery light begins to blink
when the battery has discharged to a low battery level. When the battery is discharged, the battery
light turns off and the device shuts down.
Chapter 2 Power management
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Step 4: Fully recharge the battery
To recharge the battery:
1.
Plug the device into external power and maintain external power until the battery is fully recharged.
When the battery is recharged, the battery light on the device turns off.
You can use the device while the battery is recharging, but the battery will charge faster if the device
is off.
2.
If the device is off, turn it on when the battery is fully charged and the battery light has turned off.
Step 5: Reenable Hibernation and Standby
CAUTION: Failure to reenable Hibernation after calibration may result in a full battery discharge and
information loss if the device reaches a critical battery level.
1.
Select Start > Control Panel > Performance and Maintenance > Power Options.
2.
Reenter the settings that you recorded for the items in the Plugged in column and the Running
on batteries column.
3.
Click OK.
Conserving battery power
●
Select low power-use settings through Power Options in Windows Control Panel.
●
Turn off wireless and local area network (LAN) connections and exit modem applications when you
are not using them.
●
Disconnect external devices that are not plugged into an external power source, when you are not
using them.
●
Stop, disable, or remove any external media cards that you are not using.
●
Use the fn+f3 and fn+f4 hotkeys to adjust screen brightness as needed.
●
If you leave your work, initiate Standby or Hibernation, or shut down the device.
Storing a battery
CAUTION:
of time.
To prevent damage to a battery, do not expose it to high temperatures for extended periods
If a device will be unused and unplugged from external power for more than 2 weeks, remove the battery
and store it separately.
To prolong the charge of a stored battery, place it in a cool, dry place.
NOTE: A stored battery should be checked every 6 months. If the capacity is less than 50 percent,
recharge the battery before returning it to storage.
Calibrate a battery before using it if it has been stored for one month or more.
Disposing of a used battery
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short
external contacts; do not dispose of in fire or water.
Refer to the Regulatory, Safety and Environmental Notices for battery disposal information.
Using battery power
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
19
Shutting down the device
CAUTION: Unsaved information will be lost when the device is shut down.
The Shut Down command closes all open programs, including the operating system, and then turns off
the display and device.
Shut down the device under any of the following conditions:
●
When you need to replace the battery or access components inside the device
●
When you are connecting an external hardware device that does not connect to a USB port
●
When the device will be unused and disconnected from external power for an extended period
To shut down the device, follow these steps:
NOTE: If the device is in Standby or in Hibernation, you must first exit Standby or Hibernation before
shutdown is possible.
1.
Save your work and close all open programs.
2.
Select Start > Turn Off Computer > Turn Off.
If the device is unresponsive and you are unable to use the preceding shutdown procedures, try the
following emergency procedures in the sequence provided:
20
●
Press ctrl+alt+delete. Then, click Shut Down > Turn Off.
●
Slide and hold the power switch for at least 5 seconds.
●
Disconnect the device from external power and remove the battery.
Chapter 2 Power management
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
3
Internet
Your device supports the following types of Internet access:
●
Wired—You can access the Internet by connecting to a broadband network using the RJ-45
(network) jack.
●
Wireless—For mobile Internet access, you can use a wireless connection. To learn about setting
up a wireless network or adding your device to an existing network, refer to the “Connecting to a
wireless network” section.
Connecting to a wired network
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the device.
To connect the network cable:
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem
cable or telephone cable into an RJ-45 (network) jack.
1.
Plug the network cable into the network jack (1) on the device.
Connecting to a wired network
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
21
2.
Plug the other end of the cable into a network wall jack (2).
Connecting to a wireless network
Using wireless devices
Wireless technology transfers data across radio waves instead of wires. Your device may be equipped
with one or more of the following wireless devices:
●
Wireless local area network (WLAN) device—Connects the device to wireless local area networks
(commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your
home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a
WLAN, each mobile wireless device communicates with a wireless router or a wireless access
point.
●
HP Mobile Broadband Module (select models only)—A wireless wide area network (WWAN) device
that provides access to information wherever mobile network operator service is available. In a
WWAN, each mobile device communicates to a mobile network operator’s base station. Mobile
network operators install networks of base stations (similar to cell phone towers) throughout large
geographic areas, effectively providing coverage across entire states, regions, or even countries.
The device supports the following IEEE industry standards:
●
802.11b, the first popular standard, supports data rates of up to 11 Mbps and operates at a
frequency of 2.4 GHz.
●
802.11g supports data rates of up to 54 Mbps and operates at a frequency of 2.4 GHz. An 802.11g
WLAN device is backward compatible with 802.11b devices, so they can operate on the same
network.
For more information on wireless technology, refer to the information and Web site links provided in
Help and Support.
Identifying wireless and network status icons
Icon
22
Name
Chapter 3 Internet
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Description
Will be
updated with
XP Home icon
for final doc.
Wireless (connected)
Identifies the location of the wireless light and the wireless switch
on the device. Also identifies that one or more of the wireless
devices are on.
Wireless (disconnected)
Indicates that all of the wireless devices are off.
Wireless network connection (connected)
Indicates that one or more of your WLAN devices are connected
to the network.
Wireless network connection (disconnected)
Indicates that one or more of your WLAN devices are not
connected to a network.
Network status (connected)
Indicates that one or more of your LAN drivers are installed and
one or more LAN devices are connected to the network.
Network status (disconnected)
Indicates that one or more of your LAN drivers are installed but
no LAN devices are connected to the network.
Using the wireless controls
You can control the wireless devices in your device using these features:
●
Wireless switch
●
Operating system controls
Using the wireless switch
The device has a wireless switch, one or more wireless devices, and one wireless light. All of the wireless
devices on your device are enabled at the factory, so the wireless light is on (blue) when you turn on
the device.
The wireless light indicates the overall power state of your wireless devices, not the status of individual
devices. If the wireless light is blue, at least one wireless device is on. If the wireless light is amber, all
wireless devices are off.
Because the wireless devices are enabled at the factory, you can use the wireless switch to turn on or
turn off all of the wireless devices simultaneously.
Using HP Connection Manager software (select models only)
Connection Manager allows you to manage your Internet profiles, SMS (Short Message Service)
messaging, connection devices and methods, and edit additional settings.
To start Connection Manager:
1.
Click the HP Connection Manager icon in the notification area, at the far right of the taskbar.
2.
Click Connect to turn on the wireless wide area network (WWAN) feature and use HP Mobile
Broadband.
Connecting to a wireless network
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
23
NOTE: Connection time varies. After the connection is established, a notification message is
displayed in the Connection Manager window.
NOTE: Connection Manager is minimized when first opened. To maximize the Connection Manager
window and view more information on connectivity status, click Details.
For more details about using Connection Manager, refer to the Connection Manager Help.
Using HP Wireless Assistant software
A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device is
disabled by the Setup Utility, it must be reenabled by the Setup Utility before it can be turned on or off
using Wireless Assistant.
NOTE: Enabling or turning on a wireless device does not automatically connect the device to a
network.
To view the state of the wireless devices, position the mouse pointer over the wireless icon in the
notification area, at the far right of the taskbar.
NOTE:
area.
To display the wireless icon, click the Show hidden icons icon (< or <<) in the notification
If the wireless icon is not displayed in the notification area, complete the following steps to change
Wireless Assistant properties:
1.
Click Start > Control Panel > Network and Internet Connections > HP Wireless Assistant.
2.
Click Properties.
3.
Select the check box next to Wireless Assistant icon in notification area.
4.
Click Apply.
For more information, refer to the Wireless Assistant software Help:
1.
Open Wireless Assistant by double-clicking the icon in the notification area.
2.
Click the Help button.
You can use the properties dialog box in Wireless Assistant to show the on/off controls for each installed
wireless device and control the devices separately. To show the on/off controls:
1.
Double-click the Wireless Assistant icon in the notification area, at the far right of the taskbar.
2.
Click Properties.
3.
Select the Independent controls for installed wireless devices check box, and then click
Apply.
4.
Click Turn off or Turn on to control each wireless device separately.
Using a WLAN
With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other
devices and accessories that are linked by a wireless router or a wireless access point.
24
Chapter 3 Internet
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
NOTE:
The terms wireless router and wireless access point are often used interchangeably.
●
A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points
that can accommodate a large number of devices and accessories and can separate critical
network functions.
●
A home or small office WLAN typically uses a wireless router, which allows several wireless and
wired devices to share an Internet connection, a printer, and files without requiring additional pieces
of hardware or software.
To use the WLAN device in your device, you must connect to a WLAN infrastructure (provided through
a service provider or a public or corporate network).
Setting up a WLAN
To set up a WLAN and connect to the Internet, you need the following equipment:
●
A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an
Internet service provider (ISP)
●
A wireless router (purchased separately) (2)
●
The wireless device (3)
The illustration below shows an example of a wireless network installation that is connected to the
Internet.
As your network grows, additional wireless and wired devices can be connected to the network to access
the Internet.
For help in setting up your WLAN, refer to the information provided by your router manufacturer or your
ISP.
Protecting your WLAN
It is essential to understand that because the WLAN standard was designed with only limited security
capabilities—basically to foil casual eavesdropping rather than more powerful forms of attack—WLANs
are vulnerable to well-known and well-documented security weaknesses.
WLANs in public areas, or “hotspots,” like coffee shops and airports may not provide any security. New
technologies are being developed by wireless manufacturers and hotspot service providers that make
the public environment more secure and anonymous. If you are concerned about the security of your
device in a hotspot, limit your network activities to noncritical e-mail and basic Internet surfing.
When you set up a WLAN or access an existing WLAN, always enable security features to protect your
network from unauthorized access. The common security levels are Wi-Fi Protected Access (WPA)Personal and Wired Equivalent Privacy (WEP). Because wireless radio signals travel outside the
network, other WLAN devices can pick up unprotected signals and either connect to your network
Connecting to a wireless network
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
25
(uninvited) or capture information being sent across it. However, you can take precautions to protect
your WLAN:
●
Use a wireless transmitter with built-in security
Many wireless base stations, gateways, or routers provide built-in security features such as
wireless security protocols and firewalls. With the correct wireless transmitter, you can protect your
network from the most common wireless security risks.
●
Work behind a firewall
A firewall is a barrier that checks both data and requests for data that are sent to your network,
and discards any suspicious items. Firewalls are available in many varieties, both software and
hardware. Some networks use a combination of both types.
●
Use wireless encryption
A variety of sophisticated encryption protocols is available for your WLAN. Find the solution that
works best for your network security:
●
◦
Wired Equivalent Privacy (WEP) is a wireless security protocol that encodes or encrypts all
network data before it is transmitted using a WEP key. Usually, you can allow the network to
assign the WEP key. Alternatively, you can set up your own key, generate a different key, or
choose other advanced options. Without the correct key, others will not be able to use the
WLAN.
◦
WPA (Wi-Fi Protected Access), like WEP, uses security settings to encrypt and decrypt data
that is transmitted over the network. However, instead of using one static security key for
encryptions as WEP does, WPA uses “temporal key integrity protocol” (TKIP) to dynamically
generate a new key for every packet. It also generates different sets of keys for each device
on the network.
Close your network
If possible, prevent your network name (SSID) from being broadcast by the wireless transmitter.
Most networks initially broadcast the name, telling any device nearby that your network is available.
By closing the network, other devices are less likely to know that your network exists.
NOTE: If your network is closed and the SSID is not broadcast, you will need to know or remember
the SSID to connect new devices to the network. Write down the SSID and store it in a secure
place before closing the network.
Connecting to a WLAN
To connect to the WLAN, follow these steps:
1.
Be sure that the WLAN device is on. If it is on, the wireless light is blue. If the wireless light is amber,
slide the wireless switch.
2.
Select Start > Connect to.
3.
Select your WLAN from the list, and then type the network security key, if required.
●
If the network is unsecured, meaning that anyone can access the network, a warning is
displayed. Click Connect Anyway to accept the warning and complete the connection.
●
If the network is a security-enabled WLAN, you are prompted to enter a network security key,
which is a security code. Type the code, and then click Connect to complete the connection.
NOTE: If no WLANs are listed, you are out of range of a wireless router or access point.
26
Chapter 3 Internet
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
NOTE: If you do not see the network you want to connect to, click Set up a connection or
network. A list of options is displayed. You can choose to manually search for and connect to a
network or to create a new network connection.
4.
After the connection is made, place the mouse pointer over the wireless network connection icon
in the notification area, at the far right of the taskbar, to verify the name, speed, strength, and status
of the connection.
NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation,
router manufacturer, and interference from other electronic devices or structural barriers such as walls
and floors.
More information about using a WLAN is available through the following resources:
●
Information from your ISP and the user guides included with your wireless router and other WLAN
equipment
●
Information and Web site links provided in Help and Support
For a list of public WLANs near you, contact your ISP or search the Web. Web sites that list public
WLANs include Cisco Internet Mobile Office Wireless Locations, Hotspotlist, and Geektools. Check with
each public WLAN location for cost and connection requirements.
Roaming to another network
When you move your device within range of another WLAN, Windows attempts to connect to that
network. If the attempt is successful, your device is automatically connected to the new network. If
Windows does not recognize the new network, follow the same procedure you used initially to connect
to your WLAN.
Using HP Mobile Broadband (select models only)
An HP Mobile Broadband Module is a wireless wide area network (WWAN) device that provides access
to information wherever mobile network operator service is available. Using HP Mobile Broadband
requires a network service provider (called a mobile network operator), which in most cases is a mobile
phone network operator. Coverage for HP Mobile Broadband is similar to mobile phone voice coverage.
When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay
connected to the Internet, send e-mail, or connect to your corporate network whether you are on the
road or outside the range of Wi-Fi hotspots.
HP Mobile Broadband supports the following technologies:
●
HSPA (High Speed Packet Access) module, which provides access to networks based on the
Global System for Mobile Communications (GSM) telecommunications standard.
●
EV-DO (Evolution Data Optimized), which provides access to networks based on the code division
multiple access (CDMA) telecommunications standard.
You may need the HP Mobile Broadband Module serial number to activate mobile broadband service.
The serial number is printed on a label inside the battery bay of your device. Some mobile network
operators require the use of a subscriber identity module (SIM). A SIM contains basic information about
you, such as a personal identification number (PIN), as well as network information. Some devices
include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be provided in
the packet of HP Mobile Broadband information provided with your device, or the mobile network
operator may provide it separately from the device.
For information on inserting and removing the SIM, refer to the “Inserting a SIM” and “Removing a SIM”
sections in this chapter.
Using HP Mobile Broadband (select models only)
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
27
For information on HP Mobile Broadband and how to activate service with a preferred mobile network
operator, refer to the HP Mobile Broadband information included with your device. For additional
information, see the HP Web site at http://www.hp.com/go/mobilebroadband (US only).
Inserting a SIM
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM:
1.
Shut down the device. If you are not sure whether the device is off or in Hibernation, turn the device
on by pressing the power button. Then shut down the device through the operating system.
2.
Close the display.
3.
Disconnect all external devices connected to the device.
4.
Unplug the power cord from the AC outlet.
5.
Turn the device upside down on a flat surface, with the battery bay toward you.
6.
Remove the battery.
7.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
8.
Replace the battery.
NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.
9.
Reconnect external power.
10. Reconnect external devices.
11. Turn on the device.
28
Chapter 3 Internet
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Removing a SIM
To remove a SIM:
1.
Shut down the device. If you are not sure whether the device is off or in Hibernation, turn the device
on by pressing the power button. Then shut down the device through the operating system.
2.
Close the display.
3.
Disconnect all external devices connected to the device.
4.
Unplug the power cord from the AC outlet.
5.
Turn the device upside down on a flat surface, with the battery bay toward you.
6.
Remove the battery.
7.
Press in on the SIM (1), and then remove it from the slot (2).
8.
Replace the battery.
9.
Reconnect external power.
10. Reconnect external devices.
11. Turn on the device.
Using the HP Mobile Broadband Setup Utility (select
models only)
The HP Mobile Broadband Setup Utility provides basic information about setting up HP Mobile
Broadband.
NOTE:
The HP Mobile Broadband Setup Utility is not available in all regions.
When you first turn on HP Mobile Broadband, the Getting Started with HP Mobile Broadband page
opens.
Using the HP Mobile Broadband Setup Utility (select models only)
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
29
4
Multimedia
Multimedia features
Your device includes multimedia features that allow you to listen to music, watch movies, and view
pictures. Your device may include the following multimedia components:
●
Integrated speakers for listening to music
●
Integrated webcam that allows you to capture photographs and videos
●
Preinstalled multimedia software that allows you to play and manage your music, movies, and
pictures
NOTE:
Your device may not include all of the components listed.
The following sections explain how to identify and use the multimedia components included with your
device.
Identifying your multimedia components
The following illustration and table describe the multimedia features of the device.
30
Chapter 4 Multimedia
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Component
(1)
Description
Webcam
Captures still photographs and videos.
NOTE: To capture videos, you will need to install additional
webcam software.
(2)
Webcam light
On: The webcam is in use.
(3)
Internal microphone
Records sound.
(4)
Speakers (2)
Produce sound.
(5)
Volume up hotkey
Increases speaker sound when pressed in combination with
the fn key.
(6)
Volume down hotkey
Decreases speaker sound when pressed in combination with
the fn key.
(7)
Volume mute hotkey
Mutes speaker sound when pressed in combination with the
fn key.
(8)
Audio-out (headphones) jack/Audio-in
(microphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, earbuds, a headset, or television
audio. Also connects an optional headset microphone.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,
Safety and Environmental Notices.
NOTE: When a device is connected to the jack, the device
speakers are disabled.
The audio component cable must have a 4–conductor
connector.
Adjusting the volume
You can adjust the volume using the following controls:
●
Device volume hotkey—A combination of the fn key (1) and either the f8 (2), f10 (3), or f11 (4)
function key:
◦
To mute or restore volume, press fn+f8.
◦
To decrease volume, press fn+f10.
Multimedia features
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
31
◦
●
To increase volume, press fn+f11.
Windows® volume control:
a.
Click the Volume icon in the notification area, at the far right of the taskbar.
b.
Increase or decrease the volume by moving the slider up or down. Select the Mute check box
to mute the volume.
– or –
a.
Double-click the Volume icon in the notification area.
b.
In the Volume Control column, you can increase or decrease the volume by moving the
Volume slider up or down. You can also adjust the balance or mute the volume.
If the Volume icon is not displayed in the notification area, follow these steps to add it:
●
a.
Select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio
Devices > Volume tab.
b.
Select the Place volume icon in the taskbar check box.
c.
Click Apply.
Program volume control:
Volume can also be adjusted within some programs.
Multimedia software
Your device includes preinstalled multimedia software that allows you to play music, watch movies, and
view pictures.
32
Chapter 4 Multimedia
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using other preinstalled multimedia software
To locate other preinstalled multimedia software:
▲
Select Start > All Programs, and then open the multimedia program you want to use. For example,
if you want to use Windows Media Player (select models only), click Windows Media Player.
NOTE:
Some programs may be located in subfolders.
Installing multimedia software from the Internet
▲
To install multimedia software from the Internet, go to the software manufacturer’s Web site and
follow the instructions.
NOTE: Software downloaded from the Internet may contain viruses. Refer to the “Security” chapter
for more information.
Audio
Your device has a variety of audio features that allow you to:
●
Play music using your device speakers and/or connected external speakers.
●
Record sound using the internal microphone or an optional external headset microphone.
●
Download music from the Internet.
●
Create multimedia presentations using audio and images.
●
Transmit sound and images with instant messaging programs.
Connecting external audio devices
WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and
Environmental Notices.
To connect external devices such as external speakers, headphones, or a headset microphone, refer
to the information provided with the device. For best results, remember the following tips:
●
Be sure that the device cable has 4–conductor connector that supports both audio-out
(headphones) and audio-in (microphone).
●
Be sure that the device cable is securely connected to the jack on your device.
●
Be sure to install any drivers required by the external device.
NOTE: A driver is a required program that acts like a translator between the device and the
programs that use the device.
Checking your audio functions
To check the system sound on your device, follow these steps:
1.
Select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio
Devices.
2.
When the Sound and Audio Device Properties window opens, click the Sounds tab. Under
Program events, select any sound event, such as a beep or alarm, and click the arrow button to
check the sound.
Audio
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
33
You should hear sound through the speakers or through connected headphones.
To check the record functions of the device, follow these steps:
1.
Select Start > All Programs > Accessories > Entertainment > Sound Recorder.
2.
Click the record button and speak into the microphone. Save the file to your desktop.
3.
Open a multimedia program and play back the sound.
NOTE: For best results when recording, speak directly into the microphone and record sound in a
setting free of background noise.
▲
To confirm or change the audio settings on your device, right-click the Volume icon on the taskbar,
or select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio
Devices.
Video
Your device enables you to use a variety of video features:
●
Watch movies
●
Play games over the Internet
●
Edit pictures and video to create presentations
●
Connect external video devices
Connecting an external monitor or projector
Use a VGA cable (purchased separately) to connect an external display, such as a monitor or projector,
to the external monitor port on the device.
To connect an external monitor or projector:
1.
Connect the optional VGA cable to the external monitor port on the device.
2.
Connect the external monitor or projector to the other end of the cable.
NOTE: If a properly connected external monitor or projector does not display a screen image, press
fn+f2 to transfer the image to the external display. Repeatedly pressing fn+f2 alternates the screen
image between the external display and the device.
34
Chapter 4 Multimedia
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Webcam
Your device includes an integrated webcam, located at the top of the display. The webcam is an input
device that allows you to capture still photographs and videos.
NOTE:
To record videos, you need to install additional webcam software.
To access the webcam:
1.
Click Start > My Computer, and then double-click the camera icon.
2.
Click Take a new picture to take a picture.
NOTE:
The picture is automatically saved in the My Documents folder.
Webcam
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
35
5
Security
Protecting the device
Standard security features provided by the Windows operating system and the non-Windows Setup
Utility can protect your personal settings and data from a variety of risks.
Follow the procedures in this chapter to use the following features:
●
Passwords
●
Firewall software
●
Antivirus support (Norton Internet Security)
●
Critical security updates
NOTE: Security solutions are designed to act as deterrents, but they may not deter software attacks
or prevent the device from being mishandled or stolen.
NOTE:
Before you send your device for service, remove all password settings.
Device risk
Security feature
Unauthorized use of the device
●
QuickLock
●
Power-on password
●
Firewall software
●
Windows updates
Unauthorized access to data
Unauthorized access to Setup Utility, BIOS settings, and other
system identification information
Administrator password
Ongoing or future threats to the device
Critical security updates from Microsoft
Unauthorized access to a Windows user account
User password
Using passwords
A password is a group of characters that you choose to secure your device information. Several types
of passwords can be set, depending on how you want to control access to your information. Passwords
can be set in Windows or in the non-Windows Setup Utility preinstalled on the device.
CAUTION: To prevent being locked out of the device, record each password you set. Because most
passwords are not displayed as they are set, changed, or deleted, it is essential to record each password
immediately and store it in a secure place.
You can use the same password for a Setup Utility feature and for a Windows security feature. You can
also use the same password for more than one Setup Utility feature.
36
Chapter 5 Security
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Use the following guidelines when setting a password in Setup Utility:
●
A password can be any combination of up to 8 letters and numbers and is case sensitive.
●
A password set in the Setup Utility must be entered at a Setup Utility prompt. A password set
in Windows must be entered at a Windows prompt.
Use the following tips for creating and saving passwords:
●
When creating passwords, follow requirements set by the program.
●
Write down your passwords and store them in a secure place away from the device.
●
Do not store passwords in a file on the device.
●
Do not use your name or other personal information that could be easily discovered by an outsider.
The following sections list Windows and Setup Utility passwords and describe their functions. For
additional information about Windows passwords, such as screen-saver passwords, select Start > Help
and Support.
Passwords set in Windows
Password
Function
Administrator password
Protects administrator-level access to device contents.
NOTE: This password cannot be used to access Setup Utility
contents.
User password
Protects access to a Windows user account. It also protects
access to the device contents and must be entered when you
exit Standby or Hibernation.
QuickLock
Protects the device by requiring a password to be entered in
the Windows Log On dialog box before you access the device.
After you set a user or administrator password, follow these
steps:
1.
Initiate QuickLock by pressing fn+f6.
2.
Exit QuickLock by entering your Windows user or
administrator password.
Passwords set in Setup Utility
Password
Function
Administrator password*
●
Protects access to Setup Utility.
●
After this password is set, it must be entered each time
you access Setup Utility.
CAUTION: If you forget your administrator password, you
cannot access Setup Utility.
Using passwords
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
37
Password
Function
Power-on password*
●
Protects access to the device contents.
●
After this password is set, it must be entered each time
you turn on or restart the device, or exit Hibernation.
CAUTION: If you forget your power-on password, you
cannot turn on or restart the device, or exit Hibernation.
*For details about each of these passwords, refer to the following topics.
Administrator password
Your administrator password protects the configuration settings and system identification information in
Setup Utility. After this password is set, you must enter it each time you access Setup Utility.
Your administrator password is not interchangeable with an administrator password set in Windows,
nor is it displayed as it is set, entered, changed, or deleted. Be sure that you record your password and
store it in a safe place.
Managing an administrator password
To set, change, or delete this password, follow these steps:
1.
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Set Administrator Password, and then press enter.
3.
●
To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press enter.
●
To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press enter.
●
To delete an administrator password, type your current password in the Enter Password field,
and then press enter 4 times.
To save your changes and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes.
Your changes go into effect when the device restarts.
Entering an administrator password
At the Enter Password prompt, type your administrator password, and then press enter. After 3
unsuccessful attempts to enter the administrator password, you must restart the device and try again.
Power-on password
Your power-on password prevents unauthorized use of the device. After this password is set, it must
be entered each time you turn on or restart the device, or exit Hibernation. A power-on password is not
displayed as it is set, entered, changed, or deleted.
38
Chapter 5 Security
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Managing a power-on password
To set, change, or delete this password, follow these steps:
1.
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Set Power-On Password, and then press enter.
3.
●
To set a power-on password, type your password in the Enter New Password and Confirm
New Password fields, and then press enter.
●
To change a power-on password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press enter.
●
To delete a power-on password, type your current password in the Enter Current
Password field, and then press enter 4 times.
To save your changes and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes.
Your changes go into effect when the device restarts.
Entering a power-on password
At the Enter Password prompt, type your password, and then press enter. After 3 unsuccessful attempts
to enter the password, you must restart the device and try again.
Using antivirus software
When you use the device for e-mail or Internet access, you expose it to computer viruses that can disable
the operating system, programs, or utilities or cause them to function abnormally.
Antivirus software can detect most viruses, destroy them, and in most cases, repair damage they have
caused. To provide ongoing protection against newly discovered viruses, antivirus software must be
kept up to date.
Norton Internet Security, an antivirus program, is preinstalled on the device.
●
Your version of Norton Internet Security includes 60 days of free updates. It is strongly
recommended that you protect the device against new viruses beyond 60 days by purchasing
extended update service. Instructions for using and updating Norton Internet Security software and
for purchasing extended update service are provided within the program.
●
To access Norton Internet Security, or to get more information about it, click Start > All
Programs > Norton Internet Security.
NOTE:
HP recommends that always update the antivirus software to help protect your device.
NOTE: For more information about computer viruses, type viruses in the Search box in Help and
Support.
Using firewall software
When you use the device for e-mail, network, or Internet access, unauthorized persons may be able to
gain access to the device, your personal files, and information about you. Use the firewall software
preinstalled on the device to protect your privacy.
Using antivirus software
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
39
Firewall features include logging and reporting of network activity, and automatic monitoring of all
incoming and outgoing traffic. Refer to the firewall user guide or contact your firewall manufacturer for
more information.
NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printer
or file sharing on a network, or block authorized e-mail attachments. To temporarily resolve the problem,
disable the firewall, perform the task that you want to perform, and then reenable the firewall. To
permanently resolve the problem, reconfigure the firewall.
Installing critical updates
CAUTION: Microsoft sends alerts regarding critical updates. To protect the device from security
breaches and device viruses, install all critical updates from Microsoft as soon as you receive an alert.
Updates to the operating system and other software may have become available after the device was
shipped. To be sure that all available updates are installed on the device, observe these guidelines:
40
●
Run Windows Update as soon as possible after you set up your device. Use the update link at
Start > All Programs > Windows Update.
●
Run Windows Update at regular intervals, such as once a month.
●
Obtain updates to Windows and other Microsoft programs, as they are released, from the Microsoft
Web site and through the updates link in Help and Support.
Chapter 5 Security
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
6
Digital cards
Optional digital cards provide secure data storage and convenient data sharing. These cards are often
used with digital media–equipped cameras and PDAs as well as with other devices.
The Digital Media Slot supports the following formats:
●
Memory Stick (MS)
●
MS/Pro
●
MultiMediaCard (MMC)
●
Secure Digital (SD) Memory Card
●
xD-Picture card
Inserting a digital card
CAUTION: To avoid damaging the digital card or the device, do not insert any type of adapter into the
Digital Media Slot.
CAUTION:
To prevent damage to the digital card connectors, use minimal force to insert a digital card.
1.
Hold the digital card label-side up, with the connectors facing the device.
2.
Insert the card into the Digital Media Slot, and then push in on the card until it is firmly seated.
You will hear a sound when the device has been detected, and a menu of options may be displayed.
Inserting a digital card
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
41
Stopping and removing a digital card
CAUTION: To prevent loss of data or an unresponsive system, stop a digital card before removing it.
1.
Save your information and close all programs associated with the digital card.
NOTE: To stop a data transfer, click Cancel in the operating system Copying window.
2.
Stop the digital card:
a.
Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon
(< or <<) in the notification area.
3.
42
b.
Click the name of the digital card in the list.
c.
Click Stop, and then click OK.
Press in on the digital card (1), and then remove the card from the slot (2).
Chapter 6 Digital cards
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
7
USB devices
Using a USB device
Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to
the system, an optional docking device, or an optional expansion product.
Some USB devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturer's instructions.
The device has 3 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices. An optional USB
hub, optional docking device, or an optional expansion product provides additional USB ports that can
be used with the device.
Connecting a USB device
CAUTION:
▲
To prevent damage to a USB connector, use minimal force to connect a USB device.
To connect a USB device, connect the USB cable for the device to the USB port.
You will hear a sound when the device has been detected.
NOTE: When you connect a USB device, you may see a message in the notification area to let you
know that the device is recognized by the system.
Stopping and removing a USB device
CAUTION: To prevent loss of information or an unresponsive system, stop a USB device before
removing it.
CAUTION:
To prevent damage to a USB connector, do not pull on the cable to remove the USB device.
Using a USB device
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
43
To stop and remove a USB device:
1.
Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or
<<) in the notification area.
2.
Click the name of the device in the list.
NOTE: If the USB device is not listed, you do not have to stop the device before you remove it.
44
3.
Click Stop, and then click OK.
4.
Remove the device.
Chapter 7 USB devices
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
8
Pointing devices and keyboard
Setting pointing device preferences
Use Mouse Properties in Windows® to customize settings for pointing devices, such as button
configuration, click speed, and pointer options.
To access Mouse Properties, select Start > Control Panel > Printers and Other Hardware >
Mouse.
Using pointing devices
Using the TouchPad
To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer
to go. Use the TouchPad buttons like the corresponding buttons on an external mouse. To scroll up and
down using the TouchPad vertical scroll zone, slide your finger up or down over the lines.
NOTE: If you are using the TouchPad to move the pointer, you must lift your finger off the TouchPad
before moving it to the scroll zone. Simply sliding your finger from the TouchPad to the scroll zone will
not activate the scrolling function.
Connecting an external mouse
You can connect an external USB mouse to the device using one of the USB ports on the device.
Using the keyboard
Using hotkeys
Hotkeys are combinations of the fn key (1) and one of the function keys (2).
The icons on the f1 through f4, and f6, f8, f10, and f11 keys represent the hotkey functions. Hotkey
functions and procedures are discussed in the following sections.
Setting pointing device preferences
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
45
Function
Hotkey
Initiate Standby.
fn+f1
Switch the image.
fn+f2
Decrease screen brightness.
fn+f3
Increase screen brightness.
fn+f4
Initiate QuickLock.
fn+f6
Mute or restore speaker.
fn+f8
Decrease speaker sound.
fn+f10
Increase speaker sound.
fn+f11
To use a hotkey command on the device keyboard, follow either of these steps:
●
Briefly press the fn key, and then briefly press the second key of the hotkey command.
– or –
●
Press and hold down the fn key, briefly press the second key of the hotkey command, and then
release both keys at the same time.
Initiating Standby (fn+f1)
Press fn+f1 to initiate Standby.
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the device is in Standby, the power light blinks.
CAUTION: To reduce the risk of information loss, save your work before initiating Standby.
The device must be on before you can initiate Standby.
46
Chapter 8 Pointing devices and keyboard
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
NOTE: If a critical battery level occurs while the device is in Standby, the device initiates Hibernation
and the information stored in memory is saved to the hard drive. The factory setting for critical battery
action is Hibernate, but this setting can be changed in advanced power settings.
To exit Standby, briefly slide the power switch.
The function of the fn+f1 hotkey can be changed. For example, you can set the fn+f1 hotkey to initiate
Hibernation instead of Standby.
NOTE: In all Windows operating system windows, references to the sleep button apply to the fn+f1
hotkey.
Switching the screen image (fn+f2)
Press fn+f2 to switch the screen image among display devices connected to the system. For example,
if a monitor is connected to the device, pressing fn+f2 alternates the screen image from device display
to monitor display to simultaneous display on both the device and the monitor.
NOTE: You must use a VGA cable (purchased separately) to connect an external display, such as a
monitor or projector, to the external monitor port on the device.
Most external monitors receive video information from the device using the external VGA video standard.
The fn+f2 hotkey can also alternate images among other devices receiving video information from the
device.
The following video transmission types, with examples of devices that use them, are supported by the
fn+f2 hotkey:
●
LCD (device display)
●
External VGA (most external monitors)
Decreasing screen brightness (fn+f3)
Press fn+f3 to decrease screen brightness. Hold down the hotkey to decrease the brightness level
incrementally.
Increasing screen brightness (fn+f4)
Press fn+f4 to increase screen brightness. Hold down the hotkey to increase the brightness level
incrementally.
Initiating QuickLock (fn+f6)
Press fn+f6 to initiate the QuickLock security feature.
QuickLock protects your information by displaying the operating system Log On window. While the Log
On window is displayed, the device cannot be accessed until a Windows user password or a Windows
administrator password is entered.
NOTE: Before you can use QuickLock, you must set a Windows user password or a Windows
administrator password. For instructions, refer to Help and Support.
To use QuickLock, press fn+f6 to display the Log On window and lock the device. Then follow the
instructions on the screen to enter your Windows user password or your Windows administrator
password and access the device.
Muting speaker sound (fn+f8)
Press fn+f8 to mute speaker sound. Press the hotkey again to restore speaker sound.
Using the keyboard
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
47
Decreasing speaker sound (fn+f10)
Press fn+f10 to decrease speaker sound. Hold down the hotkey to decrease speaker sound
incrementally.
Increasing speaker sound (fn+f11)
Press fn+f11 to increase speaker sound. Hold down the hotkey to increase speaker sound
incrementally.
48
Chapter 8 Pointing devices and keyboard
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
9
Drives
Identifying installed drives
To view the drives installed on the device, select Start > My Computer.
Handling drives
Drives are fragile device components that must be handled with care. Refer to the following cautions
before handling drives. Additional cautions are included with the procedures to which they apply.
CAUTION: To reduce the risk of damage to the device, damage to a drive, or loss of information,
observe these precautions:
Before you move a device that is connected to an external hard drive, initiate Standby and allow the
screen to clear, or properly disconnect the external hard drive.
Before handling a drive, discharge static electricity by touching the unpainted metal surface of the drive.
Do not touch the connector pins on a removable drive or on the device.
Handle a drive carefully; do not drop a drive or place items on it.
Before removing or inserting a drive, shut down the device. If you are unsure whether the device is off,
in Standby, or in Hibernation, turn the device on and then shut it down through the operating system.
Do not use excessive force when inserting a drive into a drive bay.
Do not type on the keyboard or move the device while an optional optical drive is writing to a disc. The
write process is sensitive to vibration.
When the battery is the only source of power, be sure that the battery is sufficiently charged before
writing to media.
Avoid exposing a drive to temperature or humidity extremes.
Avoid exposing a drive to liquids. Do not spray the drive with cleaning products.
Remove media from a drive before removing the drive from the drive bay, or traveling with, shipping, or
storing a drive.
If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging
and label the package “FRAGILE.”
Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walkthrough devices and security wands. The airport security devices that check carry-on luggage, such as
conveyor belts, use X-rays instead of magnetism and will not damage a drive.
Using external drives
Removable external drives expand your options for storing and accessing information. .
Identifying installed drives
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
49
USB drives include the following types:
●
1.44-megabyte diskette drive
●
Hard drive module (a hard drive with an adapter attached)
●
DVD-ROM Drive
●
DVD/CD-RW Combo Drive
●
DVD+RW/R and CD-RW Combo Drive
●
DVD±RW/R and CD-RW Combo Drive
Using optional external devices
NOTE: For more information about required software and drivers, or to learn which device port to use,
refer to the manufacturer's instructions.
To connect an external device:
CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be
sure that the device is turned off and the AC power cord is unplugged.
1.
Connect the device.
2.
If you are connecting a powered device, plug the device power cord into a grounded AC outlet.
3.
Turn on the device.
To disconnect an unpowered external device, turn off the device, and then disconnect it. To disconnect
a powered external device, turn off the device, disconnect it, and then unplug the AC power cord.
50
Chapter 9 Drives
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
10 Memory modules
The device has one memory module compartment, which is located on the bottom of the device. The
memory capacity of the device can be upgraded by replacing the existing memory module in the primary
memory module slot.
WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord
and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
To add or replace a memory module:
1.
Save your work.
2.
Shut down the device and close the display.
If you are not sure whether the device is off or in Hibernation, turn the device on by sliding the
power switch. Then shut down the device through the operating system.
3.
Disconnect all external devices connected to the device.
4.
Unplug the power cord from the AC outlet.
5.
Turn the device upside down on a flat surface.
6.
Remove the battery from the device.
7.
Using a small Phillips screwdriver, loosen the 2 cover screws (1).
8.
Lift the memory module compartment cover (2) away from the device.
51
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
9.
Remove the existing memory module:
a.
Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
CAUTION: To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b.
Grasp the edge of the memory module (2), and gently pull the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
10. Insert a new memory module:
CAUTION: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module, and do not bend the memory module.
52
a.
Align the notched edge (1) of the memory module with the tab in the memory module slot.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
Chapter 10 Memory modules
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
c.
Gently press the memory module (3) down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
CAUTION: To prevent damage to the memory module, be sure that you do not bend the
memory module.
11. Align the tabs on the memory module compartment cover with the notches on the device, and then
close the cover (1).
12. Tighten the 2 cover screws (2).
13. Replace the battery.
14. Turn the device right-side up, and then reconnect external power and external devices.
15. Turn on the device.
53
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
11 Updating software
Updated versions of the software provided with your device may be available on the HP Web site.
Most software and BIOS updates on the HP Web site are packaged in compressed files called
SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file.
To update the software, follow these steps, which are explained in the remainder of this guide:
1.
Identify your device model, product category, and series or family. Prepare for a system BIOS
update by identifying the BIOS version currently installed on the device.
If your device is connected to a network, consult the network administrator before installing any
software updates, especially system BIOS updates.
NOTE: The device system BIOS is stored on the system ROM. The BIOS initializes the operating
system, determines how the device will interact with the hardware devices, and provides for data
transfer among hardware devices, including the time and date.
2.
Access the updates on the HP Web site at http://www.hp.com.
3.
Install the updates.
Updating the BIOS
To update the BIOS, first determine what BIOS version you currently have and then download and install
the new BIOS.
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently installed
on the device, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be displayed by opening
the Setup Utility.
To display the BIOS information:
1.
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
If the Setup Utility does not open with the system information displayed, use the arrow keys to
select the Main menu.
When the Main menu is selected, BIOS and other system information is displayed.
3.
54
To exit the Setup Utility, use the arrow keys to select Exit > Exit Discarding Changes, and then
press enter.
Chapter 11 Updating software
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Downloading a BIOS update
CAUTION: To prevent damage to the device or an unsuccessful installation, download and install a
BIOS update only when the device is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the device is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow
these instructions:
Do not disconnect power from the device by unplugging the power cord from the AC outlet.
Do not shut down the device or initiate Standby or Hibernation.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
To download a BIOS update:
1.
Access the page on the HP Web site that provides software for your device:
Select Start > Help and Support, and then select the software and drivers update.
2.
Follow the instructions on the screen to identify your device and access the BIOS update you want
to download.
3.
At the download area, follow these steps:
a.
Identify the BIOS update that is later than the BIOS version currently installed on your device.
Make a note of the date, name, or other identifier. You may need this information to locate
the update later, after it has been downloaded to your hard drive.
b.
Follow the instructions on the screen to download your selection to the hard drive.
Make a note of the path to the location on your hard drive where the BIOS update will be
downloaded. You will need to access this path when you are ready to install the update.
NOTE: If you connect your device to a network, consult the network administrator before installing
any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the
download is complete. If no instructions are displayed, follow these steps:
1.
Open Windows Explorer by selecting Start > My Computer.
2.
Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3.
Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the
update.
4.
Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5.
Complete the installation by following the instructions on the screen.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded
file from your hard drive.
Updating the BIOS
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
55
Updating programs and drivers
To download and install software other than a BIOS update, follow these steps:
1.
Access the page on the HP Web site that provides software for your device:
Select Start > Help and Support, and then select the software and drivers update.
2.
Follow the instructions on the screen to find the software you want to update.
3.
At the download area, select the software you want to download and follow the instructions on the
screen.
NOTE: Make a note of the path to the location on your hard drive where the software will be
downloaded. You will need to access this path when you are ready to install the software.
4.
When the download is complete, open Windows Explorer by selecting Start > My Computer.
5.
Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).
6.
Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the
update.
7.
Double-click the file that has an .exe extension (for example, filename.exe).
The installation begins.
8.
Complete the installation by following the instructions on the screen.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded
file from your hard drive.
56
Chapter 11 Updating software
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
12 Setup Utility
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working.
The utility reports information about the device and provides settings for startup, security, and other
preferences.
To start the Setup Utility:
▲
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select System Configuration > Language, and then press enter.
3.
Use the arrow keys to select a language, and then press enter.
4.
When a confirmation prompt with your language selected is displayed, press enter.
5.
To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
Your change goes into effect immediately.
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or f5 or f6.
●
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while the Setup Utility is open, press
f1.
Starting the Setup Utility
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
57
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1.
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Select the Main menu. System information such as the system time and date, and identification
information about the device is displayed.
3.
To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation is displayed, press enter.
4.
To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the device restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.
Exiting the Setup Utility
You can exit the Setup Utility with or without saving changes.
●
To exit the Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
●
To exit the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
After either choice, the device restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE:
58
Some of the Setup Utility menu items listed in this chapter may not be supported by your device.
Chapter 12 Setup Utility
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Main menu
Select
To do this
System information
●
View and change the system time and date.
●
View identification information about the device.
●
View specification information about the processor, memory size,
and system BIOS.
Security menu
Select
To do this
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
System Configuration menu
Select
To do this
Language Support
Change the Setup Utility language.
Processor C4 State
Enable/disable the processor C4 sleep state.
Boot Options
Set the following boot options:
●
f10 and f12 Delay (sec.)―Set the delay for the f10 and f12 functions
of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●
Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●
Boot Order―Set the boot order for:
◦
Internal hard drive (select models only)
◦
USB Floppy
◦
USB CD/DVD ROM Drive
◦
USB flash drive
◦
USB Hard drive
◦
USB Card Reader
◦
Network adapter
NOTE: Only the devices attached to the system will appear
in the boot order menu.
Setup Utility menus
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
59
Diagnostics menu
60
Select
To do this
Hard Disk Self Test (select models only)
Run a comprehensive self-test on the hard drive.
Memory Test
Run a diagnostic test on the system memory.
Chapter 12 Setup Utility
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Index
AC adapter
connecting 13
identifying 9
administrator password
creating 38
entering 38
managing 38
airport security devices 49
antennas 8
applications key, Windows 3
audio devices, connecting
external 33
audio functions, checking 33
audio-in (microphone) jack 5, 31
audio-out (headphones) jack 5,
31
battery
calibrating 17
charging 15, 17
conserving power 19
discharging 16
disposing 19
identifying 9
inserting 14
low battery levels 16
recharging 19
removing 14
storing 19
battery bay, identifying 7
battery light 4, 15, 16
battery power 13
battery release latches 7, 14
battery temperature 19
bay, battery 7
BIOS, updating 54
boot options 59
boot order 59
button, volume mute 31
buttons
left TouchPad 1
right TouchPad 1
cables
LAN 21
USB 43
VGA 34
calibrating battery 17
caps lock light, identifying 2
CD drive 50
changing the Setup Utility
language 57
charging batteries 15, 17
checking audio functions 33
compartments, memory
module 7
components
additional hardware 8
bottom 7
display 6
front 3
left-side 5
right-side 4
TouchPad 1
connecting to a WLAN 26
connection, external power 13
conservation, power 19
cord, power 9
corporate WLAN connection 26
critical battery level 16
Diagnostics menu 60
digital card
inserting 41
removing 42
stopping 42
Digital Media Slot, identifying 4
diskette drive 50
display
image, switching 47
screen brightness hotkeys 47
display switch, identifying 6
displaying system information 58
drive light, identifying 3
drive media 10
drives
diskette 50
external 49
hard 49
optical 50
drives, boot order 59
DVD drive 50
earbuds 5, 31
encryption 26
entering a power-on
password 39
entering an administrator
password 38
exiting the Setup Utility 58
external audio devices,
connecting 33
external drive 49
external monitor port 34
external monitor port,
identifying 4
firewall 26
fn key 3, 45
function keys 2, 45
hard disk drive, external 49
hard drive self test 60
hard drive, external 49
hardware, identifying 1
headphones 5, 31
headphones (audio-out) jack 5,
31
Hibernation
exiting 10
initiated during critical battery
level 16
initiating 10
hotkeys
decreasing screen
brightness 47
Index
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
61
decreasing speaker sound 48
description 45
increasing screen
brightness 47
increasing speaker volume 48
initiating QuickLock 47
initiating Standby 46
muting speaker sound 47
switching screen image 47
using 46
HP Mobile Broadband Module 27
HP Mobile Broadband,
disabled 28
hubs 43
icons
network status 22
wireless 22
internal display switch,
identifying 6
internal microphone,
identifying 6, 31
Internet connection setup 25
jacks
audio-in (microphone) 5, 31
audio-out (headphones) 5,
31
RJ-45 (network) 4
keyboard hotkeys, identifying 45
keys
fn 3
function 2
Windows applications 3
Windows logo 3
labels
Microsoft Certificate of
Authenticity 9
regulatory 9
service tag 9
language support 59
latches, battery release 7
left TouchPad button,
identifying 1
62
lights
battery 4
caps lock 2
drive 3
power 3
webcam 6
wireless 4
local area network (LAN)
cable required 21
connecting cable 21
low battery level 16
Main menu 59
managing a power-on
password 39
managing an administrator
password 38
memory module
inserting 52
removing 52
memory module compartment
cover
removing 51
replacing 53
memory module compartment,
identifying 7
memory test 60
microphone (audio-in) jack 5, 31
monitor, connecting 34
mouse, external
connecting 45
setting preferences 45
multimedia components,
identifying 30
multimedia software
installing 33
using 33
mute button 31
mute hotkey, identifying 31
navigating in the Setup Utility 57
network cable
connecting 21
noise suppression circuitry 21
network jack, identifying 4
network status icon 22
noise suppression circuitry, network
cable 21
Index
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
operating system
optical drive 50
20
passwords
administrator 38
power-on 38
set in Setup Utility 37
set in Windows 37
ports
external monitor 34
USB 4, 5, 43
power
connecting 13
conserving 19
power connector, identifying 5
power cord, identifying 9
power light, identifying 3
power switch, identifying 3
power-on password
creating 39
entering 39
managing 39
Processor C4 State 59
product name and number,
device 9
programs, updating 56
projector, connecting 34
public WLAN connection 26
QuickLock 37
QuickLock hotkey 47
readable media 10
regulatory information
HP Mobile Broadband Module
serial number 9
regulatory label 9
wireless 9
release latches
battery 7, 15
restoring default settings 58
right TouchPad button,
identifying 1
RJ-45 (network) jack,
identifying 4
S
screen brightness hotkeys 47
screen image, switching 47
security cable slot, identifying 5
Security menu 59
security, cable slot 5
security, wireless 25
selecting in the Setup Utility 57
serial number, device 9
service tag 9
setup of WLAN 25
Setup Utility, passwords set in 37
setup, device 1
shut down 20
SIM
inserting 28
removing 29
software
installing 33
multimedia 33
Windows Media Player 33
speakers, identifying 6, 31
Standby
exiting 10
initiating 10
Standby hotkey 46
storing battery 19
switches
power 3
wireless 4
System Configuration menu 59
system information 59
temperature 19
TouchPad
buttons 1
identifying 1
using 45
TouchPad scroll zone,
identifying 1
traveling with the device 19
turning off the device 20
removing 43
stopping 43
USB hubs 43
USB ports, identifying
4, 5, 43
vents, identifying 5, 7
video transmission types 47
volume down hotkey,
identifying 31
volume mute button 31
volume up hotkey, identifying 31
volume, adjusting 31
webcam light, identifying 6, 31
webcam, identifying 6, 31
Windows applications key,
identifying 3
Windows logo key, identifying 3
Windows, passwords set in 37
wireless antennas 8
wireless controls
button 23
operating system 23
wireless icon 22
wireless light, identifying 4, 23
wireless network (WLAN)
connecting 26
corporate WLAN
connection 26
equipment needed 25
functional range 27
public WLAN connection 26
security 25
wireless network, connecting 22
wireless switch, identifying 4, 23
WLAN antennas, identifying 8
WLAN device 22
writable media 10
WWAN antennas, identifying 8
unresponsive system 20
USB cable, connecting 43
USB devices
connecting 43
description 43
Index
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
63
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : XSL Formatter V3.4 MR5a (3,4,2006,0718) for Windows : Windows Evaluation
Modify Date                     : 2009:02:03 20:20:54-06:00
Create Date                     : 2009:02:03 19:27:52-06:00
Metadata Date                   : 2009:02:03 20:20:54-06:00
Format                          : application/pdf
Creator                         : gibsono
Title                           : 
Document ID                     : uuid:a62eb385-fa0a-4891-9f35-b82fcde01eb5
Instance ID                     : uuid:e4a95ed4-cdd2-4ff0-b881-afd823eb39fe
Has XFA                         : No
Page Count                      : 72
Author                          : gibsono

EXIF Metadata provided by EXIF.tools

Broadcom BRCM1030 802.11g WLAN PCI-E Mini Card User Manual BixbyUG Manual

Broadcom Corporation 802.11g WLAN PCI-E Mini Card BixbyUG Manual

Contents

BixbyUG Manual

FCC ID Filing: QDS-BRCM1030

Navigation menu

Namespaces

Views

Navigation