Broadcom BRCM1036 802.11ag/Draft 802.11n WLAN PCI-E Minicard User Manual Manual 5

Broadcom Corporation 802.11ag/Draft 802.11n WLAN PCI-E Minicard Manual 5

Manual 5

Memory ModulesUser GuideAntenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
© Copyright 2007 Hewlett-PackardDevelopment Company, L.P.The information contained herein is subjectto change without notice. The onlywarranties for HP products and services areset forth in the express warranty statementsaccompanying such products and services.Nothing herein should be construed asconstituting an additional warranty. HP shallnot be liable for technical or editorial errorsor omissions contained herein.First Edition: January 2007Document Part Number: 431177-001Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Table of contentsAdding or replacing a memory moduleIndex ..................................................................................................................................................................... 5ENWW iiiAntenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
iv ENWWAntenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Adding or replacing a memory moduleThe computer has one memory module compartment, which is located on the bottom of the computer.The memory capacity of the computer can be upgraded by adding a memory module to the vacantexpansion memory module slot or by upgrading the existing memory module in the primary memorymodule slot.WARNING! To reduce the risk of electric shock and damage to the equipment, unplug thepower cord and remove all batteries before installing a memory module.CAUTION Electrostatic discharge (ESD) can damage electronic components. Beforebeginning any procedure, ensure that you are discharged of static electricity by touching agrounded metal object.To add or replace a memory module:1. Save your work.2. Shut down the computer and close the display.If you are not sure whether the computer is off or in the Sleep state, turn the computer on by pressingthe power button. Then shut down the computer through the operating system.3. Disconnect all external devices connected to the computer.4. Unplug the power cord from the AC outlet.5. Turn the computer upside down on a flat surface.6. Remove the battery from the computer.7. Loosen the 2 memory module compartment screws (1).ENWW 1Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/Vista version. If we ship with XP, this will say "in Standby"
8. Lift the memory module compartment cover (2) away from the computer.9. If you are replacing a memory module, remove the existing memory module:a. Pull away the retention clips (1) on each side of the memory module.The memory module tilts up.CAUTION To prevent damage to the memory module, hold the memory module bythe edges only. Do not touch the components on the memory module.b. Grasp the edge of the memory module (2), and gently pull the module out of the memorymodule slot.To protect a memory module after removal, place it in an electrostatic-safe container.2 Adding or replacing a memory module ENWWAntenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
10. Insert a new memory module:a. Align the notched edge (1) of the memory module with the tab in the memory module slot.CAUTION To prevent damage to the memory module, hold the memory module bythe edges only. Do not touch the components on the memory module.b. With the memory module at a 45-degree angle from the surface of the memory modulecompartment, press the module (2) into the memory module slot until it is seated.c. Gently press the memory module (3) down, applying pressure to both the left and right edgesof the memory module, until the retention clips snap into place.CAUTION To prevent damage to the memory module, be sure that you do not bendthe memory module.11. Align the tabs (1) on the memory module compartment cover with the notches on the computer.12. Close the cover (2).13. Tighten the 2 memory module compartment screws (3).ENWW 3Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
14. Replace the battery.15. Reconnect external power and external devices.16. Turn on the computer.4 Adding or replacing a memory module ENWWAntenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
IndexMmemoryadding memory modules 1replacing memory modules 1upgrading memory modules 1memory moduleadding 1inserting 3removing 2replacing 1upgrading 1memory module compartmentcoverremoving 2replacing 3ENWW Index 5Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Navigation menu