Broadcom BRCM1075 802.11abgn/acWLAN+Bluetooth 4.0 NGFF2230 Mini Card User Manual

Broadcom Corporation 802.11abgn/acWLAN+Bluetooth 4.0 NGFF2230 Mini Card Users Manual

Users Manual

User GuideThinkPad E450 and E455Compliance ID: TP00067A
Note: Before using this information and the product it supports, be sure to read and understand the following:•Safety, Warranty, and Setup Guide•Regulatory Notice• “Important safety information” on page vi• Appendix E “Notices” on page 145The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. Torefer to them, go to http://www.lenovo.com/UserManual and follow the instructions on the screen.First Edition (November 2014)© Copyright Lenovo 2014.LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration“GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
ContentsRead this first . . . . . . . . . . . . . . vImportant safety information . . . . . . . . . . viConditions that require immediate action . . viiSafety guidelines . . . . . . . . . . . . viiChapter 1. Product overview . . . . . . 1Locating computer controls, connectors, andindicators. . . . . . . . . . . . . . . . . . 1Front view. . . . . . . . . . . . . . . . 1Right-side view. . . . . . . . . . . . . . 3Left-side view . . . . . . . . . . . . . . 4Bottom view . . . . . . . . . . . . . . . 6Status indicators . . . . . . . . . . . . . 6Locating important product information . . . . . . 8Machine type and model label. . . . . . . . 8FCC ID and IC Certification number label . . . 8Certificate of Authenticity label . . . . . . . 9Genuine Microsoft label . . . . . . . . . 10Features . . . . . . . . . . . . . . . . . 10Specifications . . . . . . . . . . . . . . . 11Operating environment . . . . . . . . . . . 12Lenovo programs . . . . . . . . . . . . . 12Accessing Lenovo programs on the Windows7 operating system . . . . . . . . . . . 12Accessing Lenovo programs on the Windows8.1 operating system . . . . . . . . . . 13An introduction to Lenovo programs . . . . 14Chapter 2. Using your computer . . . 17Registering your computer . . . . . . . . . . 17Frequently asked questions . . . . . . . . . 17Using the multi-touch screen . . . . . . . . . 19Special keys . . . . . . . . . . . . . . . 21Function keys and key combinations . . . . 21Windows key . . . . . . . . . . . . . 23Using the ThinkPad pointing device . . . . . . 23Using the TrackPoint pointing stick . . . . . 24Using the trackpad . . . . . . . . . . . 24Power management . . . . . . . . . . . . 27Checking the battery status. . . . . . . . 27Using the ac power adapter. . . . . . . . 28Charging the battery . . . . . . . . . . 29Maximizing the battery life . . . . . . . . 29Managing the battery power . . . . . . . 29Power-saving modes . . . . . . . . . . 29Handling the battery. . . . . . . . . . . 30Connecting to the network . . . . . . . . . . 32Ethernet connections . . . . . . . . . . 32Wireless connections . . . . . . . . . . 32Using an external display . . . . . . . . . . 34Connecting an external display . . . . . . 35Choosing a display mode . . . . . . . . 35Changing display settings . . . . . . . . 36Using audio features . . . . . . . . . . . . 36Using the camera . . . . . . . . . . . . . 37Using a flash media card. . . . . . . . . . . 37Inserting a flash media card. . . . . . . . 37Removing a flash media card . . . . . . . 38Chapter 3. Enhancing yourcomputer . . . . . . . . . . . . . . . 39Finding ThinkPad options . . . . . . . . . . 39ThinkPad OneLink Dock . . . . . . . . . . . 39ThinkPad OneLink Pro Dock . . . . . . . . . 40Chapter 4. Security . . . . . . . . . . 43Attaching a mechanical lock . . . . . . . . . 43Using passwords. . . . . . . . . . . . . . 43Typing passwords . . . . . . . . . . . 43Power-on password . . . . . . . . . . . 43Supervisor password . . . . . . . . . . 44Hard disk passwords . . . . . . . . . . 46Hard disk security . . . . . . . . . . . . . 48Using the fingerprint reader. . . . . . . . . . 48Notice on deleting data from your hard disk drive,hybrid drive, or solid-state drive . . . . . . . . 50Using firewalls . . . . . . . . . . . . . . . 51Protecting data against viruses . . . . . . . . 51Chapter 5. Advanced configuration . . 53Installing a new operating system . . . . . . . 53Installing the Windows 7 operating system . . 53Installing the Windows 8.1 operating system . 54Installing device drivers . . . . . . . . . . . 55Using the ThinkPad Setup program . . . . . . 55Main menu . . . . . . . . . . . . . . 55Config menu. . . . . . . . . . . . . . 56Date and Time menu . . . . . . . . . . 60Security menu . . . . . . . . . . . . . 60Startup menu . . . . . . . . . . . . . 64Restart menu . . . . . . . . . . . . . 66Updating your system UEFI BIOS . . . . . 66Chapter 6. Preventing problems . . . 67© Copyright Lenovo 2014 i
General tips for preventing problems . . . . . . 67Making sure device drivers are current . . . . . 68Taking care of your computer . . . . . . . . . 69Cleaning the cover of your computer . . . . 70Chapter 7. Troubleshooting computerproblems . . . . . . . . . . . . . . . 73Diagnosing problems . . . . . . . . . . . . 73Troubleshooting . . . . . . . . . . . . . . 73Computer stops responding . . . . . . . 73Spills on the keyboard . . . . . . . . . . 74Error messages . . . . . . . . . . . . 74Errors without messages . . . . . . . . . 76Beep errors . . . . . . . . . . . . . . 77Memory module problems . . . . . . . . 78Networking problems . . . . . . . . . . 78Problems with the keyboard and other pointingdevices. . . . . . . . . . . . . . . . 80Problems with the display and multimediadevices. . . . . . . . . . . . . . . . 81Fingerprint reader problems. . . . . . . . 86Battery and power problems . . . . . . . 86Problems with drives and other storagedevices. . . . . . . . . . . . . . . . 89A software problem . . . . . . . . . . . 89Problems with ports and connectors . . . . 90Chapter 8. Recovery overview . . . . 91Recovery overview for the Windows 7 operatingsystem. . . . . . . . . . . . . . . . . . 91Creating and using a recovery media . . . . 91Performing backup and recovery operations . 92Using the Rescue and Recovery workspace . 93Creating and using a rescue medium . . . . 94Reinstalling preinstalled programs and devicedrivers . . . . . . . . . . . . . . . . 95Solving recovery problems . . . . . . . . 96Recovery overview for the Windows 8.1 operatingsystems . . . . . . . . . . . . . . . . . 96Refreshing your computer . . . . . . . . 96Resetting your computer to the factory defaultsettings. . . . . . . . . . . . . . . . 97Using the advanced startup options . . . . 97Recovering your operating system if Windows8.1 fails to start. . . . . . . . . . . . . 97Creating and using recovery media . . . . . 97Chapter 9. Replacing devices . . . . . 99Static electricity prevention. . . . . . . . . . 99Replacing the coin-cell battery . . . . . . . . 99Replacing the hard disk drive, hybrid drive, orsolid-state drive . . . . . . . . . . . . . . 102Replacing the memory module . . . . . . . . 106Replacing a wireless LAN card . . . . . . . . 109Replacing the keyboard . . . . . . . . . . . 113Chapter 10. Getting support . . . . 119Before you contact Lenovo . . . . . . . . . . 119Getting help and service . . . . . . . . . . . 119Using diagnostic programs . . . . . . . . 120Lenovo Support Web site. . . . . . . . . 120Calling Lenovo . . . . . . . . . . . . . 120Purchasing additional services . . . . . . . . 121Chapter 11. You and yourcomputer . . . . . . . . . . . . . . 123Accessibility and comfort . . . . . . . . . . 123Ergonomic information. . . . . . . . . . 123Comfort . . . . . . . . . . . . . . . 124Accessibility information . . . . . . . . . 124Traveling with your computer . . . . . . . . . 128Travel tips . . . . . . . . . . . . . . . 128Travel accessories . . . . . . . . . . . 128Appendix A. Regulatoryinformation . . . . . . . . . . . . . 131Wireless related information . . . . . . . . . 131Location of the UltraConnect wirelessantennas . . . . . . . . . . . . . . . 132Locating wireless regulatory notices . . . . 132Export classification notice . . . . . . . . . . 133Electronic emission notices. . . . . . . . . . 133Federal Communications CommissionDeclaration of Conformity . . . . . . . . 133Industry Canada Class B emission compliancestatement . . . . . . . . . . . . . . . 133European Union - Compliance to theElectromagnetic Compatibility Directive . . . 134German Class B compliance statement . . . 134Korea Class B compliance statement . . . . 135Japan VCCI Class B compliance statement . . 135Japan compliance statement for productswhich connect to the power mains withrated current less than or equal to 20 A perphase . . . . . . . . . . . . . . . . 135Lenovo product service information forTaiwan . . . . . . . . . . . . . . . . 135Eurasian compliance mark . . . . . . . . 135Brazil regulatory notice. . . . . . . . . . 135Mexico regulatory notice . . . . . . . . . 135Appendix B. WEEE and recyclingstatements . . . . . . . . . . . . . 137Important WEEE information . . . . . . . . . 137Japan recycling statements . . . . . . . . . 137Recycling information for Brazil . . . . . . . . 138ii User Guide
Battery recycling information for the EuropeanUnion . . . . . . . . . . . . . . . . . . 138Battery recycling information for Taiwan. . . . . 139Battery recycling information for the United Statesand Canada. . . . . . . . . . . . . . . . 139Recycling information for China . . . . . . . . 139Appendix C. Restriction of HazardousSubstances Directive (RoHS) . . . . 141European Union RoHS . . . . . . . . . . . 141China RoHS. . . . . . . . . . . . . . . . 141India RoHS . . . . . . . . . . . . . . . . 141Turkish RoHS . . . . . . . . . . . . . . . 141Ukraine RoHS . . . . . . . . . . . . . . . 142Appendix D. ENERGY STAR modelinformation . . . . . . . . . . . . . 143Appendix E. Notices . . . . . . . . . 145Trademarks . . . . . . . . . . . . . . . . 146© Copyright Lenovo 2014 iii
iv User Guide
Read this firstBe sure to follow the important tips given here to get the most use and enjoyment out of your computer.Failure to do so might lead to discomfort or injury, or cause your computer to fail.Protect yourself from the heat that your computer generates.When your computer is turned on or the battery is charging, the base, the palmrest, and some other parts may become hot. The temperature they reachdepends on the amount of system activity and the level of charge in the battery.Extended contact with your body, even through clothing, could causediscomfort or even a skin burn.• Avoid keeping your hands, your lap, or any other part of your body incontact with a hot section of the computer for any extended time.• Periodically take hands from using the keyboard by lifting your hands fromthe palm rest.Protect yourself from the heat generated by the ac power adapter.When the ac power adapter is connected to an electrical outlet and yourcomputer, it generates heat.Extended contact with your body, even through clothing, may cause a skinburn.• Do not place the ac power adapter in contact with any part of your bodywhile it is in use.• Never use it to warm your body.Prevent your computer from getting wet.To avoid spills and the danger of electrical shock, keep liquids away from yourcomputer.Protect the cables from being damaged.Applying strong force to cables may damage or break them.Route communication lines, or the cables of an ac power adapter, a mouse, akeyboard, a printer, or any other electronic device, so that they cannot be walkedon, tripped over, pinched by your computer or other objects, or in any waysubjected to treatment that could interfere with the operation of your computer.© Copyright Lenovo 2014 v
Protect your computer and data when moving it.Before moving a computer equipped with a hard disk drive or hybrid drive, doone of the following:• Turn it off.• Put it in sleep mode.• Put it in hibernation mode.This will help to prevent damage to the computer, and possible loss of data.Handle your computer gently.Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects onyour computer, display, or external devices.Carry your computer carefully.• Use a quality carrying case that provides adequate cushioning and protection.• Do not pack your computer in a tightly packed suitcase or bag.• Before putting your computer in a carrying case, make sure that it is off, in sleepmode, or in hibernation mode. Do not put a computer in a carrying case while itis turned on.Important safety informationNote: Read the important safety information first.This information can help you safely use your notebook computer. Follow and retain all information includedwith your computer. The information in this document does not alter the terms of your purchase agreementor the Lenovo®Limited Warranty. For more information, see “Warranty Information” in the Safety, Warranty,and Setup Guide that comes with your computer.Customer safety is important. Our products are developed to be safe and effective. However, personalcomputers are electronic devices. Power cords, power adapters, and other features can create potentialsafety risks that can result in physical injury or property damage, especially if misused. To reduce theserisks, follow the instructions included with your product, observe all warnings on the product and in theoperating instructions, and review the information included in this document carefully. By carefully followingthe information contained in this document and provided with your product, you can help protect yourselffrom hazards and create a safer computer work environment.Note: This information includes references to power adapters and batteries. In addition to notebookcomputers, some products (such as speakers and monitors) ship with external power adapters. If you havesuch a product, this information applies to your product. In addition, computer products contain a coin-cellbattery that provides power to the system clock even when the computer is unplugged, so the batterysafety information applies to all computer products.vi User Guide
Conditions that require immediate actionProducts can become damaged due to misuse or neglect. Some product damage is serious enoughthat the product should not be used again until it has been inspected and, if necessary, repaired byan authorized servicer.As with any electronic device, pay close attention to the product when it is turned on. On very rareoccasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or youmight hear sounds like popping, cracking or hissing. These conditions might merely mean that aninternal electronic component has failed in a safe and controlled manner. Or, they might indicatea potential safety issue. However, do not take risks or attempt to diagnose the situation yourself.Contact the Customer Support Center for further guidance. For a list of Service and Support phonenumbers, see the following Web site:http://www.lenovo.com/support/phoneFrequently inspect your computer and its components for damage or wear or signs of danger.If you have any question about the condition of a component, do not use the product. Contactthe Customer Support Center or the product manufacturer for instructions on how to inspect theproduct and have it repaired, if necessary.In the unlikely event that you notice any of the following conditions, or if you have any safetyconcerns with your product, stop using the product and unplug it from the power source andtelecommunication lines until you can speak to the Customer Support Center for further guidance.• Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that arecracked, broken, or damaged.• Signs of overheating, smoke, sparks, or fire.• Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreignsubstances on the battery.• A cracking, hissing or popping sound, or strong odor that comes from the product.• Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord orpower adapter.• The computer product, power cord, or power adapter has been exposed to water.• The product has been dropped or damaged in any way.• The product does not operate normally when you follow the operating instructions.Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured foror by Lenovo, stop using that product until you can contact the product manufacturer for further instructions,or until you get a suitable replacement.Safety guidelinesAlways observe the following precautions to reduce the risk of injury and property damage.Service and upgradesDo not attempt to service a product yourself unless instructed to do so by the Customer Support Center oryour documentation. Only use a Service Provider who is approved to repair your particular product.Note: Some computer parts can be upgraded or replaced by the customer. Upgrades typically arereferred to as options. Replacement parts approved for customer installation are referred to as CustomerReplaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate forcustomers to install options or replace CRUs. You must closely follow all instructions when installing orreplacing parts. The Off state of a power indicator does not necessarily mean that voltage levels inside aproduct are zero. Before you remove the covers from a product equipped with a power cord, always make© Copyright Lenovo 2014 vii
sure that the power is turned off and that the product is unplugged from any power source. If you haveany questions or concerns, contact the Customer Support Center.Although there are no moving parts in your computer after the power cord has been disconnected, thefollowing warnings are required for your safety.CAUTION:Hazardous moving parts. Keep fingers and other body parts away.CAUTION:Before you open the computer cover, turn off the computer and wait several minutes until thecomputer is cool.Power cords and power adaptersDANGERUse only the power cords and power adapters supplied by the product manufacturer.The power cords shall be safety approved. For Germany, it shall be H05VV-F, 3G, 0.75 mm2, orbetter. For other countries, the suitable types shall be used accordingly.Never wrap a power cord around a power adapter or other object. Doing so can stress the cord inways that can cause the cord to fray, crack, or crimp. This can present a safety hazard.Always route power cords so that they will not be walked on, tripped over, or pinched by objects.Protect power cords and power adapters from liquids. For instance, do not leave your power cordor power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers.Liquids can cause a short circuit, particularly if the power cord or power adapter has been stressedby misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connectorterminals on a power adapter, which can eventually result in overheating.Always connect power cords and signal cables in the correct order and ensure that all power cordconnectors are securely and completely plugged into receptacles.Do not use any power adapter that shows corrosion at the ac input pins or shows signs ofoverheating (such as deformed plastic) at the ac input pins or anywhere on the power adapter.Do not use any power cords where the electrical contacts on either end show signs of corrosion oroverheating or where the power cord appears to have been damaged in any way.viii User Guide
Extension cords and related devicesEnsure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you useare rated to handle the electrical requirements of the product. Never overload these devices. If power stripsare used, the load should not exceed the power strip input rating. Consult an electrician for more informationif you have questions about power loads, power requirements, and input ratings.Plugs and outletsDANGERIf a receptacle (power outlet) that you intend to use with your computer equipment appears to bedamaged or corroded, do not use the outlet until it is replaced by a qualified electrician.Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtaina replacement.Do not share an electrical outlet with other home or commercial appliances that draw large amountsof electricity; otherwise, unstable voltage might damage your computer, data, or attached devices.Some products are equipped with a three-pronged plug. This plug fits only into a groundedelectrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it intoa non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for anapproved outlet adapter or to replace the outlet with one that enables this safety feature. Neveroverload an electrical outlet. The overall system load should not exceed 80 percent of the branchcircuit rating. Consult an electrician for more information if you have questions about power loadsand branch circuit ratings.Be sure that the power outlet you are using is properly wired, easily accessible, and located closeto the equipment. Do not fully extend power cords in a way that will stress the cords.Be sure that the power outlet provides the correct voltage and current for the product you areinstalling.Carefully connect and disconnect the equipment from the electrical outlet.Power supply statementDANGERNever remove the cover on a power supply or any part that has the following label attached.Hazardous voltage, current, and energy levels are present inside any component that has this labelattached. There are no serviceable parts inside these components. If you suspect a problem withone of these parts, contact a service technician.© Copyright Lenovo 2014 ix
External devicesCAUTION:Do not connect or disconnect any external device cables other than USB and 1394 cables while thecomputer power is on; otherwise, you might damage your computer. To avoid possible damage toattached devices, wait at least five seconds after the computer is shut down to disconnect externaldevices.General battery noticeDANGERPersonal computers manufactured by Lenovo contain a coin-cell battery to provide power tothe system clock. In addition, many mobile products, such as notebook computers, utilize arechargeable battery to provide system power when in portable mode. Batteries supplied byLenovo for use with your product have been tested for compatibility and should only be replacedwith approved parts.Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries orshort circuit the metal contacts. Do not expose the battery to water or other liquids. Only rechargethe battery strictly according to instructions included in the product documentation.Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flameto “vent” from the battery or coin-cell battery. If your battery is damaged, or if you notice anydischarge from your battery or the buildup of foreign materials on the battery leads, stop using thebattery and obtain a replacement from the battery manufacturer.Batteries can degrade when they are left unused for long periods of time. For some rechargeablebatteries (particularly Lithium Ion batteries), leaving a battery unused in a discharged state couldincrease the risk of a battery short circuit, which could shorten the life of the battery and also canpose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or storethese batteries in a discharged state.Lithium coin-cell battery noticeDANGERDanger of explosion if battery is incorrectly replaced.When replacing the lithium coin-cell battery, use only the same or an equivalent type that isrecommended by the manufacturer. The battery contains lithium and can explode if not properlyused, handled, or disposed of.Do not:• Throw or immerse into water• Heat to more than 100°C (212°F)• Repair or disassembleDispose of the battery as required by local ordinances or regulations.The following statement applies to users in the state of California, U.S.A.California Perchlorate Information:xUser Guide
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate.Perchlorate Material - special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchlorateBuilt-in rechargeable battery noticeDANGERDo not attempt to replace the built-in rechargeable lithium-ion batteries. Contact Lenovo Supportfor factory replacement.Heat and product ventilationDANGERComputers, ac power adapters, and many accessories can generate heat when turned on and whenbatteries are charging. Notebook computers can generate a significant amount of heat due to theircompact size. Always follow these basic precautions:• When your computer is turned on or the battery is charging, the base, the palm rest, and someother parts may become hot. Avoid keeping your hands, your lap, or any other part of yourbody in contact with a hot section of the computer for any extended length of time. When youuse the keyboard, avoid keeping your palms on the palm rest for a prolonged period of time.Your computer generates some heat during normal operation. The amount of heat depends onthe amount of system activity and the battery charge level. Extended contact with your body,even through clothing, could cause discomfort or even a skin burn. Periodically take breaksfrom using the keyboard by lifting your hands from the palm rest; and be careful not to usethe keyboard for any extended length of time.• Do not operate your computer or charge the battery near flammable materials or in explosiveenvironments.• Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, andreliable operation. These features might inadvertently become blocked by placing the product ona bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features.• When the ac power adapter is connected to an electrical outlet and your computer, it generatesheat. Do not place the adapter in contact with any part of your body while using it. Never use theac power adapter to warm your body. Extended contact with your body, even through clothing,may cause a skin burn.For your safety, always follow these basic precautions with your computer:• Keep the cover closed whenever the computer is plugged in.• Regularly inspect the outside of the computer for dust accumulation.• Remove dust from vents and any perforations in the bezel. More frequent cleanings might berequired for computers in dusty or high-traffic areas.• Do not restrict or block any ventilation openings.• Do not operate your computer inside furniture, as this might increase the risk of overheating.• Airflow temperatures into the computer should not exceed 35°C (95°F).© Copyright Lenovo 2014 xi
Electrical current safety informationDANGERElectric current from power, telephone, and communication cables is hazardous.To avoid a shock hazard:• Do not use your computer during a lightning storm.• Do not connect or disconnect any cables or perform installation, maintenance, or reconfigurationof this product during an electrical storm.• Connect all power cords to a properly wired and grounded electrical outlet.• Connect to properly wired outlets any equipment that will be attached to this product.• Whenever possible, use one hand only to connect or disconnect signal cables.• Never turn on any equipment when there is evidence of fire, water, or structural damage.• Disconnect the attached power cords, battery, and all the cables before you open the devicecovers, unless instructed otherwise in the installation and configuration procedures.• Do not use your computer until all internal parts enclosures are fastened into place. Never usethe computer when internal parts and circuits are exposed.DANGERConnect and disconnect cables as described in the following procedures when installing, moving,or opening covers on this product or attached devices.To connect:1. Turn everything OFF.2. First, attach all cables to devices.3. Attach signal cables to connectors.4. Attach power cords to outlets.5. Turn devices ON.To disconnect:1. Turn everything OFF.2. First, remove power cords from outlets.3. Remove signal cables from connectors.4. Remove all cables from devices.The power cord must be disconnected from the wall outlet or receptacle before installing all otherelectrical cables connected to the computer.The power cord may be reconnected to the wall outlet or receptacle only after all other electricalcables have been connected to the computer.Liquid crystal display (LCD) noticeCAUTION:The LCD is made of glass, and rough handling or dropping the computer can cause the LCD to break.If the LCD breaks and the internal fluid gets into your eyes or on your hands, immediately washthe affected areas with water for at least 15 minutes; if any symptoms are present after washing,get medical care.Note: For products with mercury-containing fluorescent lamps (for example, non-LED), the fluorescent lampin the liquid crystal display (LCD) contains mercury; dispose of according to local, state, or federal laws.xii User Guide
Using headphones or earphonesCAUTION:Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment ofthe equalizer to maximum increases the earphone and headphone output voltage and the soundpressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level.Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if theoutput of the headphone or earphone connectors do not comply with specifications of EN 50332-2. Theheadphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specificationlimits the computer’s maximum wide band true RMS output voltage to 150 mV. To help protect againsthearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN50332-2 can be dangerous due to excessive sound pressure levels.If your Lenovo computer came with headphones or earphones in the package, as a set, the combination ofthe headphones or earphones and the computer already complies with the specifications of EN 50332-1.If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due toexcessive sound pressure levels.Additional safety informationDANGERPlastic bags can be dangerous. Keep plastic bags away from babies and children to avoid dangerof suffocation.Notice for users in the U.S.A.Many personal computer products and accessories contain cords, cables or wires, such as power cords orcords to connect the accessory to a personal computer. If this product has such a cord, cable or wire, thenthe following warning applies:WARNING: Handling the cord on this product or cords associated with accessories sold with this productwill expose you to lead, a chemical known to the State of California to cause cancer, and birth defects orother reproductive harm. Wash hands after handling.Save these instructions.© Copyright Lenovo 2014 xiii
xiv User Guide
Chapter 1. Product overviewThis chapter provides information about connector locations, important product labels, computer features,specifications, operating environment, and preinstalled programs.This chapter contains the following topics:• “Locating computer controls, connectors, and indicators” on page 1• “Locating important product information” on page 8• “Features” on page 10• “Specifications” on page 11• “Operating environment” on page 12• “Lenovo programs” on pageLocating computer controls, connectors, and indicatorsThis section introduces the computer hardware features to give you the basic information you need tostart using the computer.Front viewFigure 1. ThinkPad E450 and E455 front view1Microphones 2Camera3Power button 4TrackPoint®pointing stick5System status indicator 6Fingerprint reader (available on some models)7ThinkPad®trackpad 8Media-card slot9Screen (multi-touch screen available on some models)© Copyright Lenovo 2014 1
1MicrophonesThe built-in microphones capture sound and voice when used with a program capable of handling audio.Depending on your model, your computer might come with one microphone.2CameraSome models have an integrated camera. Use the camera to take pictures or hold a video conference.For details, see “Using the camera” on page 37.3Power buttonUse the power button to turn on the computer.To turn off the computer, use the Start menu shutdown option on the Microsoft®Windows®7 operatingsystem. For the Microsoft Windows 8.1 operating system, move the pointer to the top-right or bottom-rightcorner of the screen to bring up the charms. Then click Settings ➙Power ➙Shut down.If your computer stops responding and you cannot turn it off, press and hold the power button for fourseconds or more. If the computer still is not responding, remove the ac power adapter, the supportedThinkPad OneLink Dock, or ThinkPad OneLink Pro Dock to reset the computer.You also can program the power button so that by pressing the power button you can shut down thecomputer or put it into sleep or hibernation mode. To achieve this, you must change your power plansettings. To access power plan settings, do the following:• For Windows 7: Start the Power Manager program and then click the Power Plan tab. For instructionson how to start the Power Manager program, see “Accessing Lenovo programs on the Windows 7operating system” on page .• For Windows 8.1: Go to the desktop. Right-click the battery-status icon in the Windows notification areaand click More power options ➙Choose what the power button does.ThinkPad pointing device4TrackPoint pointing stick7ThinkPad trackpadThe keyboard contains the ThinkPad pointing device. Pointing, selecting, and dragging are all part of a singleprocess that you can perform without moving your fingers from a typing position. For more information, see“Using the ThinkPad pointing device” on page 23.5System status indicatorThe illuminated dot on the ThinkPad logo functions as a system status indicator. For the detailed informationabout the indicator, see “Status indicators” on page 6.6Fingerprint reader (available on some models)Some models have a fingerprint reader. Fingerprint authentication technology provides a simple and secureuser access by associating your fingerprint with a password. For more information about the fingerprintreader, see “Using the fingerprint reader” on page 48.8Media-card slotYour computer is equipped with a media card reader, which provides a media-card slot. Insert your flashmedia card into the media-card slot to read the data on the card. For more information about the supportedcards, see “Using a flash media card” on page 37.2User Guide
9Screen (multi-touch screen available on some models)For more information, see “Using the multi-touch screen” on page .Right-side viewFigure 2. ThinkPad E450 and E455 right-side view1USB 3.0 connectors 2High Definition Multimedia Interface (HDMI™)connector3Ethernet connector 4ac power connector5Lenovo OneLink connector1USB 3.0 connectorsThe USB 3.0 connectors are used for connecting USB-compatible devices, such as a USB printer ora digital camera.Note: When you attach a USB cable to this USB connector, ensure that the USB mark is facing upward.Otherwise the connector might be damaged.2HDMI connectorUse the high-definition multimedia interface (HDMI) connector to connect the computer to aHDMI-compatible audio device or video monitor, such as an high-definition television (HDTV).Note: If you connect the computer to a supported ThinkPad OneLink Dock, use the HMDI connector onthe dock, not the one on the computer.3Ethernet connectorConnect the computer to a local area network (LAN) with the Ethernet connector.Chapter 1.Product overview 3
DANGERTo avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector.You can only connect an Ethernet cable to this connector.The Ethernet connector has two indicators that show the status of the network connection. When thegreen indicator is on, the computer is connected to a LAN. When the yellow indicator blinks, data is beingtransmitted.Note: If the computer is connected to the ThinkPad OneLink Dock or ThinkPad OneLink Pro Dock, use theEthernet connector on the docking station instead of the one on the computer.4ac power connector5Lenovo OneLink connectorWhen the ac power adapter is connected to the ac power connector, it provides power to the computerand charges the battery. When a supported ThinkPad OneLink Dock or ThinkPad OneLink Pro Dock isconnected to the Lenovo OneLink connector, it can not only extend the computer capabilities but alsoprovide ac power to the computer and charge the battery.To use the Lenovo OneLink connector, you need to remove the connector cover from the Lenovo OneLinkconnector first.Note: Ensure that you keep the connector cover. Reattach it to the Lenovo OneLink connector whenyou are not using the Lenovo OneLink connector.Left-side viewFigure 3. ThinkPad E450 and E455 left-side view1Security-lock slot 2Fan louvers3Always-on USB connector 4Combo audio connector4User Guide
1Security-lock slotPurchase a security cable lock that fits this security-lock slot to lock your computer to a stationary object toprotect your computer from theft.2Fan louversThe fan louvers and the internal fan enable air to circulate in the computer to ensure proper cooling,especially the cooling of the microprocessor.Note: To ensure proper airflow, do not place any obstacle in front of the fan louvers.3Always-on USB connectorBy default, the Always On Universal Serial Bus (USB) connector enables you to charge some mobile digitaldevices and smartphones in the following situations:• When your computer is on or in sleep mode• When your computer is in hibernation mode or is turned off, but connected to ac powerIf you want to charge these devices when your computer is in hibernation mode or is turned off, and thecomputer is not connected to ac power, do the following:• For Windows 7: Start the Power Manager program and click the Global Power Settings tab. Thenselect the Enable USB charge from the computer battery even when the computer is off checkbox, and click OK or Apply.• For Windows 8.1: Press the Windows key to go to the Start screen. Click Lenovo Settings ➙Power.Then move the switch to the On position in the Enable Always On USB area and select the Enable evenwhen the computer is off check box, and click OK or Apply.Attention: When you attach a USB cable to this USB connector, ensure that the USB mark is facing upward.Otherwise the connector might be damaged.4Combo audio connectorTo listen to the sound from your computer, connect a headphone or a headset that has a 3.5 mm, 4-poleplug to the combo audio connector.Notes:• If you are using a headset with a function switch, do not press this switch while using the headset. Ifyou press it, the headset microphone will be disabled, and the integrated microphones on the computerwill be enabled instead.• The combo audio connector does not support a conventional microphone. For more information, see“Using audio features” on page 36.Chapter 1.Product overview 5
Bottom viewFigure 4. ThinkPad E450 and E455 bottom view1Wireless LAN card slot 2Memory-upgrade slot3Speakers 4Built-in battery5Hard disk drive, hybrid drive, or solid-state drive1Wireless LAN card slotYour computer might have a wireless LAN card installed for you to establish wireless LAN connections.2Memory-upgrade slotYou can increase the amount of memory in your computer by installing a memory module in thememory-upgrade slot. Memory modules are available as options from Lenovo.3SpeakersYour computer is equipped with a pair of stereo speakers.4BatteryUse your computer with the battery power whenever ac power is unavailable.5Hard disk drive, hybrid drive, or solid-state driveDepending on the model, the computer might have a large-capacity, customer-upgradable hard disk drive,hybrid drive, or solid-state drive that can meet various storage demands.Note: The hidden service partition is the reason why there is less free space than expected on your harddisk drive, hybrid drive, or solid-state drive. This reduction is more noticeable on the solid-state drivebecause of its smaller capacity.Status indicatorsYour computer has several status indicators showing the status of your computer.Note: Your computer keyboard might look different from the following illustration.6User Guide
1Fn Lock indicatorThe Fn Lock indicator shows the status of Fn Lock function. For more information, see “Special keys ”on page 21.2Speaker-mute indicatorWhen the speaker-mute indicator is on, the speakers are muted.3Microphone-mute indicatorWhen the microphone-mute indicator is on, the microphones are muted.4Camera-status indicatorWhen the camera-status indicator is on, the camera is in use.5 6 System-status indicatorsThe illuminated dots, one in the ThinkPad logo on the outer lid of your computer and the other on the palmrest, show the system status of your computer:•Blinks for three times: The computer is initially connected to the power.•On: The computer is on (in normal mode).•Blinks fast: The computer is entering hibernation mode.•Blinks slowly: The computer is in sleep mode.Chapter 1.Product overview 7
•Off: The computer is off or in hibernation mode.Locating important product informationThis section provides information to help you locate the machine type and model label, the FCC ID and ICCertification label, the Windows Certificate of Authenticity label, and the Genuine Microsoft label.Machine type and model labelThe machine type and model label identifies your computer. When you contact Lenovo for help, the machinetype and model information helps support technicians to identify your computer and provide faster service.The following figure shows the location of the machine type and model of your computer:FCC ID and IC Certification number labelThere is no FCC ID or IC Certification number for the wireless communication cards shown on the enclosureof the computer. On some models, Lenovo provides you the information about the location of the FCC IDand IC Certification number label on the computer back cover assembly.The following figure shows the location of the FCC ID and IC Certification number label of the computer.8User Guide
The FCC ID and IC Certification number labels are affixed on the wireless LAN card 1installed in thewireless communication card slots of the computer.The following figure shows the location of the FCC ID and IC Certification number labels of your computer.To remove the wireless LAN card for repair or replacement, see “Replacing a wireless LAN card” on page 109.Note: Use only Lenovo-authorized wireless communication cards for the computer. If you install anunauthorized wireless communication card that is not approved for use in your computer, an error messagewill be displayed and the computer will beep when you turn on the computer.Certificate of Authenticity labelThe Certificate of Authenticity label is provided on models that are licensed to use a Windows 7operating system. The licensed Windows version and product key associated with the computer are printedon this label. Record this information and keep it in a safe place. You might need these numbers to startyour computer or reinstall the Windows 7 operating system. Depending on the model, the Certificate ofAuthenticity label can be on the computer cover, under the battery, or on the power adapter.For more information about the Certificate of Authenticity label, go to:http://www.microsoft.com/en-us/howtotell/Hardware.aspxThe following figure shows the location of the Certificate of Authenticity label on the computer cover:Chapter 1.Product overview 9
Genuine Microsoft labelThe Genuine Microsoft label is provided on models that are licensed to use a Windows 8.1 operating system.The version of the operating system is printed on the label. If your computer model is licensed to usethe Windows 8.1 Pro operating system, that license also permits you to use the Windows 7 Professionaloperating system in place of the Windows 8.1 Pro operating system if you prefer. Lenovo computers thatare licensed for use with a Windows 8.1 operating system are shipped with the corresponding license keydigitally encoded into the computer hardware. Depending on the computer model, the Genuine Microsoftlabel can be on the computer cover, under the battery, or on the power adapter.For more information about the Genuine Microsoft label, go to:http://www.microsoft.com/en-us/howtotell/Hardware.aspxThe following figure shows the location of the Genuine Microsoft label on the computer cover:FeaturesThis topic lists the features of your computer.To view the system properties of your computer, do the following:• For Windows 7: Click Start and right-click Computer. Then click Properties.• For Windows 8.1: Move the pointer to the top-right or bottom-right corner of the screen to bring up thecharms. Then click Settings ➙PC info.Memory• Double data rate 3 low voltage synchronous dynamic random access memory modules (DDR3 LV SDRAM)Storage device• 2.5-inch form factor, 7-mm height hard disk drive• 2.5-inch form factor, 7-mm height hybrid drive• 2.5-inch form factor, 7-mm height solid-state driveDisplayThe color display uses the Thin Film Transistor (TFT) technology.• Size: 14.0 inches (355.6 mm)• Resolution:– LCD: Up to 1366 x 768 or 1600 x 900, depending on the model10 User Guide
– External monitor: Up to 2048 x 1536• Brightness control• Integrated camera• MicrophonesKeyboard• 6-row keyboard• ThinkPad pointing device• Function keysInterface• External monitor connector (HDMI connector)• Combo audio connector• Two USB 3.0 connectors• One Always On USB connector (USB 2.0)• RJ45 Ethernet connector• 4-in-1 media-card slot• Lenovo OneLink connector• ac power connectorWireless features• Integrated wireless LAN• Integrated BluetoothSecurity features• Fingerprint reader (available on some models)SpecificationsThis section lists the physical specifications for your computer.Size• Width: 339 mm (13.35 inches)• Depth: 239 mm (9.41 inches)• Height: 24.4 mm (9.61 inches) for the non-touch model; 26.4 mm (10.39 inches) for the touch modelHeat output• 45W (154 Btu/hr) or 65 W (222 Btu/hr) maximum (depending on the model)Power source (ac power adapter)• Sine-wave input at 50 to 60 Hz• Input rating of the ac power adapter: 100 to 240 V ac, 50 to 60 HzChapter 1.Product overview 11
Operating environmentThis section provides information about the operating environment of your computer.Environment:• Maximum altitude without pressurization: 3048 m (10 000 ft)• Temperature– At altitudes up to 2438 m (8000 ft)– Operating: 5.0°C to 35.0°C (41°F to 95°F)– Storage: 5.0°C to 43.0°C (41°F to 109°F)– At altitudes above 2438 m (8000 ft)– Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F)Note: When you charge the battery, its temperature must be at least 10°C (50°F).• Relative humidity:– Operating: 8% to 80%– Storage: 5% to 95%If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.Attention:• Keep electrical appliances such as an electric fan, radio, air conditioner, and microwave oven awayfrom the computer. The strong magnetic fields generated by these appliances can damage the monitorand data on the hard disk drive or hybrid drive.• Do not place any beverages on top of or beside the computer or other attached devices. If liquid is spilledon or in the computer or an attached device, a short circuit or other damage might occur.• Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage.Lenovo programsYour computer comes with Lenovo programs to help you work easily and securely.Note: The available programs are subject to change without notice.To learn more about the programs and other computing solutions offered by Lenovo, go to:http://www.lenovo.com/supportAccessing Lenovo programs on the Windows 7 operating systemYou can access Lenovo programs on the Windows 7 operating system through Windows Search or fromControl Panel. The icon name displayed in the search result or Control Panel might be different from theprogram name. You can find the program by its program name or icon name as shown in the Lenovoprograms available on the Windows 7 operating system table.Note: If you do not find the program you need, open the Lenovo ThinkVantage®Tools program to find thedimmed icon for the program. Then double-click the icon to install the program.To access Lenovo programs through Windows Search, do the following:1. Click the Start button and then type the program name or the icon name into the search box.12 User Guide
2. Locate the program by the program name or the icon name and then click the program to launch it.To access Lenovo programs from Control Panel, do the following:Note: Some Lenovo programs might not be displayed in Control Panel. To find these programs, useWindows Search.1. Click Start ➙Control Panel. Change the view of Control Panel from Category to Large icons or Smallicons.2. Locate the program by the icon name and then click the program to launch it.Depending on the model, your computer might support the following Lenovo programs:Note: The available programs are subject to change without notice.Table 1. Lenovo programs available on the Windows 7 operating systemProgram name Icon nameAccess Connections™Lenovo - Internet ConnectionActive Protection System™Lenovo - Airbag ProtectionCommunications Utility Lenovo - Web ConferencingFingerprint Manager Pro or Lenovo FingerprintManagerLenovo - Fingerprint Manager Pro or Lenovo - FingerprintManagerLenovo Microphone Mute Lenovo-Microphone MuteLenovo QuickCast Lenovo QuickCastLenovo QuickControl Lenovo QuickControlLenovo QuickDisplay Lenovo QuickDisplayLenovo Solution Center Lenovo - System Health and DiagnosticsLenovo ThinkVantage Tools Lenovo ThinkVantage ToolsMessage Center Plus Messages from LenovoPassword Manager Lenovo - Password VaultPower Manager Lenovo - Power ControlsRecovery Media Lenovo - Factory Recovery Disks or Create Recovery MediaRescue and Recovery®Lenovo - Enhanced Backup and RestoreSystem Update Lenovo - Update and DriversAccessing Lenovo programs on the Windows 8.1 operating systemYou can access Lenovo programs on the Windows 8.1 operating system from the Start screen or theApps screen.Press the Windows key to go to the Start screen. Click a Lenovo program to launch it. If you cannot findthe program you need, click the arrow icon to go to the Apps screen. Find the desired program in thelist or search for the program in the search box.Note: If you do not find the program you need, go to Lenovo PC Experience ➙Lenovo Tools. Then youcan find the program you need.Depending on the model, your computer might support the following Lenovo programs:Note: The available programs are subject to change without notice.Chapter 1.Product overview 13
• Active Protection System• Fingerprint Manager Pro• Lenovo Companion• Lenovo Microphone Mute• Lenovo QuickCast• Lenovo QuickControl• Lenovo Settings• Lenovo Solution Center• Lenovo Support• Lenovo PC Experience• Password Manager• System UpdateAn introduction to Lenovo programsThis topic provides a brief introduction to some Lenovo programs.Note: The available programs are subject to change without notice.•Access Connections (Windows 7)The Access Connections program is a connectivity assistant program for creating and managing locationprofiles. Each location profile stores all the network and Internet configuration settings needed forconnecting to a network infrastructure from a specific location such as a home or an office.By switching between location profiles as you move your computer from place to place, you can quicklyand easily connect to a network with no need to manually reconfigure your settings and restart thecomputer each time.•Communications Utility (Windows 7)The Communications Utility program enables you to configure settings for the integrated camera andaudio devices.•Lenovo QuickDisplay (Windows 7)The Lenovo QuickDisplay program enables you to establish a connection between your computer and aWi-Fi display projector. This provides you with a quick and easy way to make presentations.•Lenovo ThinkVantage Tools (Windows 7)The Lenovo ThinkVantage Tools program helps you work more easily and securely by providing easyaccess to various program, such as Lenovo Fingerprint Manager, Lenovo Solution Center, and so on.•Message Center Plus (Windows 7)The Message Center Plus program automatically displays messages to inform you about important noticesfrom Lenovo, such as alerts on system updates and alerts on conditions that require your attention.•Mobile Broadband Connect (Windows 7)The Mobile Broadband Connect program enables you to connect the computer to the mobile broadbandnetwork through a supported wireless WAN card.•Power Manager (Windows 7)The Power Manager program provides convenient, flexible, and complete power management for thecomputer. It enables you to adjust your computer power settings to achieve the best balance betweenperformance and power saving.14 User Guide
•Recovery Media (Windows 7)The Recovery Media program enables you to restore the contents of the hard disk drive, solid-statedrive, or hybrid drive to the factory default settings.•Rescue and Recovery (Windows 7)The Rescue and Recovery program is a one-button recovery and restore solution. It includes a set ofself-recovery tools to help you diagnose computer problems, get help, and recover from system crashes,even if you cannot start the Windows operating system.•Lenovo Companion (Windows 8.1)Through the Lenovo Companion program, you can get the information about the accessories for yourcomputer, view blogs and articles about your computer, and check for other recommended programs.•Lenovo Settings (Windows 8.1)The Lenovo Settings program enables you to enhance your computing experience by turning yourcomputer into a portable hotspot, configuring camera and audio settings, optimizing your power settings,and creating and managing multiple network profiles.•Lenovo Support (Windows 8.1)The Lenovo Support program enables you to register your computer with Lenovo, download and viewuser manuals, get the warranty information of your computer, and explore help and support information.•Lenovo PC Experience (Windows 8.1)The Lenovo PC Experience program helps you work more easily and securely by providing easy access tovarious programs, such as Active Protection System, User Guide, and Lenovo Solution Center.•Active Protection System (Windows 7 and Windows 8.1)The Active Protection System program protects your hard disk drive when the shock sensor inside yourcomputer detects a condition that could damage the drive, such as system tilt, excessive vibration, orshock. The hard disk drive is less vulnerable to damage when it is not operating. This is because whenthe hard disk drive is not operating, the system stops it from spinning, and might also move the readand write heads of the drive to areas that do not contain data. As soon as the shock sensor sensesthat the environment is stable again (minimal change in system tilt, vibration, or shock), it turns on thehard disk drive.•Fingerprint Manager Pro or Lenovo Fingerprint Manager (Windows 7 and Windows 8.1)If your computer comes with a fingerprint reader, the Fingerprint Manager Pro program or LenovoFingerprint Manager program enables you to enroll your fingerprint and associate it with your passwords.As a result, the fingerprint authentication can replace your password and enable simple and secureuser access.•Lenovo Microphone Mute (Windows 7 and Windows 8.1)The Lenovo Microphone Mute program enables you to set which recording devices will be controlled bythe microphone-mute key on your computer. By pressing the microphone-mute key, you can mute orunmute the recording devices that you have selected in the Lenovo Microphone Mute program.•Lenovo QuickCast (Windows 7 and Windows 8.1)The Lenovo QuickCast program provides you with a quick and easy way to send files and uniformresource locators (URLs) between two devices.•Lenovo QuickControl (Windows 7 and Windows 8.1)The Lenovo QuickControl program enables you to control your computer remotely from yoursmartphone. You can control the mouse, enter text, control movies and music, give presentations, andmore.Chapter 1.Product overview 15
•Lenovo Solution Center (Windows 7 and Windows 8.1)The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. Itcombines diagnostic tests, system information collection, security status, and support information, alongwith hints and tips for optimal system performance.•Password Manager (Windows 7 and Windows 8.1)The Password Manager program automatically captures and fills in authentication information forWindows programs and Web sites.•System Update (Windows 7 and Windows 8.1)The System Update program enables you to keep the software on the computer up-to-date bydownloading and installing software packages, including ThinkVantage programs, device drivers, UnifiedExtensible Firmware Interface (UEFI) basic input/output system (BIOS) updates, and other third-partyprograms.16 User Guide
Chapter 2. Using your computerThis chapter provides information on using some of the computer components.This chapter contains the following topics:• “Registering your computer” on page 17• “Frequently asked questions” on page 17• “Special keys ” on page 21• “Using the ThinkPad pointing device” on page 23• “Power management” on page 27• “Connecting to the network” on page 32• “Using an external display” on page 34• “Using audio features” on page 36• “Using the camera” on page 37• “Using a flash media card” on page 37Registering your computerWhen you register your computer, information is entered into a database, which enables Lenovo to contactyou in case of a recall or other severe problem. In addition, some locations offer extended privileges andservices to registered users.When you register your computer with Lenovo, you also will receive the following benefits:• Quicker service when you call Lenovo for help• Automatic notification of free software and special promotional offersTo register your computer with Lenovo, go to http://www.lenovo.com/register and follow the instructions onthe screen to register your computer.If you are using a Windows 7 operating system, you also can register your computer through the preinstalledLenovo Product Registration program. The program launches automatically after you have used yourcomputer for a period of time. Follow the instructions on the screen to register your computer.Frequently asked questionsThe following are a few tips that will help you optimize the use of your computer.To ensure that you receive the best performance from your computer, go to the following Web page to findinformation such as aids for troubleshooting and answers to frequently asked questions:http://www.lenovo.com/support/faqCan I get my user guide in another language?• To download the user guide in another language, go to http://www.lenovo.com/support. Then followthe instructions on the screen.How do I use battery power more effectively when I am on the go?© Copyright Lenovo 2014 17
• To conserve power, or to suspend operation without exiting programs or saving files, see “Power-savingmodes” on page 29.• To achieve the best balance between performance and power saving, create and apply power plans.See “Managing the battery power” on page 29• If your computer will be turned off for an extended period of time, you can prevent battery powerfrom draining by removing the battery. Look for more information about using the battery in “Powermanagement” on page 27.How do I securely dispose of data stored on the hard disk drive, hybrid drive, or solid-state drive?• Study Chapter 4 “Security” on page 43 section to find out how you can protect your computer fromtheft and unauthorized use.• Use the Password Manager program to protect the data stored on your computer. For details, see thehelp information system of the program.• Before you dispose of the data on the hard disk drive, hybrid drive, or solid-state drive, be sure to read“Notice on deleting data from your hard disk drive, hybrid drive, or solid-state drive” on page 50.How do I get connected in different locations?• To troubleshoot a wireless networking issue, go to:http://www.lenovo.com/support/faq• Take advantage of the networking features provided by the Access Connections program (on theWindows 7 operating system) or Location Awareness program in Lenovo Settings (on the Windows8.1 operating system).• To learn more about using the wireless features of your computer, refer to “Wireless connections” onpage 32.• To travel more confidently, be sure to check the tips in “Traveling with your computer” on page 128.• Press F8 to enable or disable the wireless features.How do I give presentations or attach an external monitor often?• Ensure that you follow the procedure for “Connecting an external monitor” on page .• With the Extend desktop function, you can display output on both the computer display and an externalmonitor.How do I attach or replace a device?• See Chapter 9 “Replacing devices” on page 99 for more information about replacing the devices ofyour computer.I have been using the computer for some time already, and it is getting slower. What should I do?• Follow the “General tips for preventing problems” on page 67.• Diagnose problems yourself by using the preinstalled diagnostic software.• Check for recovery solutions in Chapter 8 “Recovery overview” on page 91.Print the following sections and keep them with your computer in case you are unable to access this onlineuser guide when necessary.• “Installing a new operating system” on page 53• “Computer stops responding” on page 73• “Power problems” on page 8718 User Guide
Using the multi-touch screenThis topic provides instructions on how to use the multi-touch screen that is available on some models.Note: Your computer screen might look different from the following illustrations.Touch gesture (touch modelsonly)DescriptionTouch: Tap.Mouse action: Click.Function: Open an app or perform an action on an open app, such as Copy,Save, and Delete, depending on the app.Supported operating systems: Windows 7 and Windows 8.1Touch: Tap and hold.Mouse action: Right-click.Function: Open a menu with multiple options.Supported operating systems: Windows 7 and Windows 8.1Touch: Slide.Mouse action: Scroll the mouse wheel, move the scroll bar, or click the scrollarrow.Function: Scroll through items, such as lists, pages, and photos.Supported operating systems: Windows 7 and Windows 8.1Touch: Drag an item to the desired location.Mouse action: Click, hold, and drag an item.Function: Move an object.Supported operating systems: Windows 7 and Windows 8.1Touch: Move two fingers closer together.Mouse action: Press the Ctrl key while scrolling the mouse wheel backward.Function: Zoom out.Supported operating systems: Windows 7 and Windows 8.1Touch: Move two fingers farther apart.Mouse action: Press the Ctrl key while scrolling the mouse wheel forward.Function: Zoom in.Supported operating systems: Windows 7 and Windows 8.1Chapter 2.Using your computer 19
Touch gesture (touch modelsonly)DescriptionTouch: Put two or more fingers on an item and then rotate your fingers clockwiseor counterclockwise (supported only on some apps).Mouse action: If the app supports rotation, click the rotation icon.Function: Rotate an item.Supported operating systems: Windows 7 and Windows 8.1Touch: Swipe in from the right edge.Mouse action: Move the pointer to the bottom-right or top-right corner of yourscreen.Function: Display the charms that contain system commands, such as Start,Settings,Search,Share, and Devices.Supported operating system: Windows 8.1Touch: Swipe in from the left edge.Mouse action: Move the pointer to the top-left corner of your screen, and thenclick. Keep clicking to cycle through the open apps.Function: Cycle through and switch to open apps.Supported operating system: Windows 8.1Touch: Swipe in and out on the left edge.Mouse action: Move the pointer to the top-left corner of the screen, and thenmove the pointer downward along the left edge. To make a selection, click thedesired app.Function: View the recently used apps or select an active app from the list.Supported operating system: Windows 8.1Touch: Swipe up to the top edge.Mouse action: Click the downward arrow ( ) located near the bottom-left cornerof the Start screen.Function: View all apps on the Start screen.Supported operating system: Windows 8.1Touch: Swipe in from the top or bottom edge of the Start screen, tap Customize,and then tap the desired icon.Mouse action: Right-click a blank area on the Start screen, click Customize,and then click the desired icon.Function: Customize tiles on the Start screen, or uninstall an app.Supported operating system: Windows 8.120 User Guide
Touch gesture (touch modelsonly)DescriptionTouch: Swipe in from the top or bottom edge of an open app.Mouse action: Right-click anywhere on an open app.Function: View the app commands on an open app, such as Copy,Save, andDelete, depending on the app.Supported operating system: Windows 8.1Touch: Swipe in from the top edge to the bottom on an open app.Mouse action: From the top edge of the screen, click, hold, and move the pointerto the bottom of the screen. Then, release the button.Function: Close the current app.Supported operating system: Windows 8.1Tips on using the multi-touch screen• The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place anymetallic object on the screen, which might damage the touch panel or cause it to malfunction.• Do not use fingernails, gloved fingers, or inanimate objects for input on the screen.• Regularly calibrate the accuracy of the finger input to avoid a discrepancy.Tips on cleaning the multi-touch screen• Turn off the computer before cleaning the multi-touch screen.• Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from themulti-touch screen. Do not apply solvents to the cloth.• Gently wipe the screen using a top-down motion. Do not apply any pressure on the screen.Special keysYour computer has several special keys to help you work more easily and effectively.Function keys and key combinationsThe keyboard has several function keys, which consist of the Fn key 1and the other function keys 2.Chapter 2.Using your computer 21
• + : Press Fn+Esc to enable or disable the Fn Lock function.When the Fn Lock function is disabled: The Fn Lock indicator is off (default mode). To initiate thespecial function of each key, press the function keys directly. To input F1-F12, press the Fn key and thecorresponding function key.When the Fn Lock function is enabled: The Fn Lock indicator turns on. To input F1-F12, press thefunction keys directly. To initiate the special function of each key, press the Fn key and the correspondingfunction key.•: Mutes or unmutes the speakers. When the speakers are muted, the speaker mute indicator turns on.If you mute the sound and turn off your computer, the sound will remain muted when you turn on yourcomputer again. To turn on the sound, press F1, F2, or F3.•: Decreases the speaker volume.•: Increases the speaker volume.•: Mutes or unmutes the microphones. When the microphones are muted, the microphone-muteindicator turns on.•: Darkens the display.•: Brightens the display.You can temporarily change the computer display brightness by pressing the two keys. To change thedefault brightness level, right-click the battery status icon in the Windows notification area. Then clickAdjust screen brightness and make changes as desired.•: Switches the display output location between the computer display and an external monitor. Formore information, refer to “Using an external display” on page 34.Note: To switch between the computer display and an external monitor, the Windows+P key combinationalso is available.•: Enables or disables the built-in wireless networking features. For more information on the wirelessfeatures, refer to “Wireless connections” on page 32.•:For Windows 8.1: Opens the Settings charm.For Windows 7: Opens Control Panel.22 User Guide
• :For Windows 8.1: Opens the Search charm.For Windows 7: Opens Windows Search.•: Views the programs that you have opened.•:For Windows 8.1: Views all the programs.For Windows 7: Opens Computer.•Fn+B: Has the same function as the Break key.•Fn+P: Has the same function as the Pause key.•Fn+S: Has the same function as the SysRq key.•Fn+K: Has the same function as the ScrLK key.Windows keyOn the Windows 7 operating system, press the Windows key to open the Start menu. On the Windows 8.1operating systems, press the Windows key to switch between the current workspace and the Start screen.For information about using the Windows key with other keys, refer to the help information system of theWindows operating system.Using the ThinkPad pointing deviceThe ThinkPad pointing device consists of a pointing stick 1on the keyboard and the trackpad 2.You can customize the ThinkPad pointing device to achieve the extended functions of the ThinkPadpointing device.To customize the ThinkPad pointing device, do the following:1. Go to Control Panel.2. Click Hardware and Sound ➙Mouse, and then the Mouse Properties window opens.3. In the Mouse Properties window, click ThinkPad.4. Follow the instructions on the screen.Chapter 2.Using your computer 23
Using the TrackPoint pointing stickTo use the TrackPoint pointing stick, apply pressure to the nonslip cap on the pointing stick in any directionparallel to the keyboard. Then you can move the pointer. But the pointing stick itself does not move. Thespeed at which the pointer moves depends on the pressure you apply to the pointing stick.The cap 1on the end of the TrackPoint pointing stick is removable. After you use the cap for a periodof time, you can replace the cap with a new one.Note: The TrackPoint cap used in your computer has grooves aas shown in the following illustration.Ensure that you replace the TrackPoint cap with a correct one that has such grooves.Using the trackpadThe whole trackpad is an active area sensitive to finger movement. The left click zones 1and right clickzones 3work as the left and right mouse buttons on a conventional mouse. The scroll zone 2enables youto scroll Web pages or documents in any direction.The following table introduces some trackpad gestures to help you use the trackpad more effectively.Note: If you use more than one finger, ensure that the fingers are slightly apart from each other.24 User Guide
Table 2. Trackpad gesturesGesture DescriptionAction: Tap anywhere on the trackpad with one finger.Function: Primary click (perform the actions of the left mouse button).Supported operating systems: Windows 7 and Windows 8.1.Action: Swipe in from the top edge of the trackpad with one finger.Function: Display the app menu.Supported operating system: Windows 8.1.Note: This gesture is only supported on the Start screen.Action: Swipe in from the right edge of the trackpad with one finger.Function: Display the charms.Supported operating system: Windows 8.1.Action: Swipe in from the left edge of the trackpad with one finger.Function: Show previous app.Supported operating system: Windows 8.1.Action: Swipe in from the top edge of the trackpad to the bottom with one finger.Function:• Start screen: Close current app.• Desktop: Switch to the Start screen.Supported operating system: Windows 8.1.Action: Swipe in and out from the right edge of the trackpad with one finger.Function: Display and hide the charms.Supported operating system: Windows 8.1.Action: Tap anywhere on the trackpad with two fingers.Function: Secondary click (perform the actions of the right mouse button).Supported operating systems: Windows 7 and Windows 8.1.Chapter 2.Using your computer 25
Table 2. Trackpad gestures (continued)Gesture DescriptionAction: Put two fingers on the trackpad, and then swipe leftward.Function: Scroll right.Supported operating systems: Windows 7 and Windows 8.1.Action: Put two fingers on the trackpad, and then swipe rightward.Function: Scroll left.Supported operating systems: Windows 7 and Windows 8.1.Action: Put two fingers on the trackpad, and then swipe upward.Function: Scroll down.Supported operating systems: Windows 7 and Windows 8.1.Action: Put two fingers on the trackpad, and then swipe downward.Function: Scroll up.Supported operating systems: Windows 7 and Windows 8.1.Action: Put two fingers on the trackpad, and then slide your fingers clockwise.Function: Rotate clockwise.Supported operating systems: Windows 7 and Windows 8.1.Note: Some apps do not support rotate.Action: Put two fingers on the trackpad, and then slide your fingers counterclockwise.Function: Rotate counterclockwise.Supported operating systems: Windows 7 and Windows 8.1.Note: Some apps do not support rotate.Action: Put two fingers on the trackpad, and then slide them farther apart.Function: Zoom in.Supported operating systems: Windows 7 and Windows 8.1.26 User Guide
Table 2. Trackpad gestures (continued)Gesture DescriptionAction: Put two fingers on the trackpad, and then slide them closer together.Function: Zoom out.Supported operating systems: Windows 7 and Windows 8.1.Action: Put three fingers on the trackpad, and then swipe leftward.Function: Next page.Supported operating systems: Windows 7 and Windows 8.1.Action: Put three fingers on the trackpad, and then swipe rightward.Function: Previous page.Supported operating systems: Windows 7 and Windows 8.1.Action: Put four fingers on the trackpad, and then swipe upward.Function: View and choose recently used apps.Supported operating systems: Windows 7 and Windows 8.1.Action: Put four fingers on the trackpad, and then swipe downward.Function: Show desktop.Supported operating systems: Windows 7 and Windows 8.1.Power managementWhen you use your computer away from electrical outlets, you depend on battery power to keep yourcomputer running. Different computer components consume power at different rates. The more you use thepower-intensive components, the faster you consume battery power.Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by enablingyou to take your work wherever you go. With ThinkPad batteries, you will be able to work longer withoutbeing tied to an electrical outlet.Checking the battery statusThe battery status icon in the Windows notification area displays the percentage of battery power remaining.Chapter 2.Using your computer 27
The rate at which you use battery power will determine how long you can use the battery of your computerbetween charges. Because each computer user has different habits and needs, it is difficult to predict howlong a battery charge will last. There are two main factors:• How much energy is stored in the battery when you begin to work.• The way you use your computer:– How often you access the hard disk drive, hybrid drive, or solid-state drive.– How bright you make the computer display.– How often you use the wireless features.To check for detailed battery status information, do the following:• For Windows 7: Open the Power Manager program and click the Battery tab.• For Windows 8.1: Open the Lenovo Settings program and click Power.Enabling the battery alarm on the Windows 7 operating systemFor the Windows 7 operating system, you can program your computer so that when the battery power fallsbelow a certain level, three events occur: the alarm goes off, a message is displayed, and the LCD isturned off.To enable the battery alarm, do the following:1. Start the Power Manager program.2. Click the Global Power Settings tab.3. For Low battery alarm or Critically low battery alarm, set the percentage of the power level and setthe action.Note: If your computer enters sleep or hibernation mode when the battery is low, but the alarm messagehas not yet been displayed, the message will be displayed when the computer resumes. To resume normaloperation, when the message is displayed, click OK.Using the ac power adapterThe power to run your computer can come either from the lithium-ion (Li-ion) battery of your computer, orfrom ac power through the ac power adapter. While you use ac power, the battery charges automatically.The ac power adapter that comes with your computer has two basic components:• The transformer pack that converts ac power for use with the computer.• The power cord that plugs into the ac outlet and into the transformer pack.Attention: Using an improper power cord could cause severe damage to your computer.Connecting the ac power adapterTo connect the ac power adapter, do the following.Note: Ensure that you perform the actions in the following order:1. Connect the power cord to the ac power adapter.2. Connect the ac power adapter to the power connector of the computer.3. Connect the power cord to an electrical outlet.Tips on using the ac power adapter• When the ac power adapter is not in use, disconnect it from the electrical outlet.28 User Guide
• Do not bind the power cord tightly around the ac power adapter transformer pack when it is connected tothe transformer.• Before you charge the battery, make sure that its temperature is at least 10°C (50°F).• You can charge the battery when the ac power adapter is connected to the computer and the battery isinstalled. You need to charge the battery in any of the following conditions:– A new battery is installed.– The percentage of power remaining is low.– The battery has not been used for a long time.Charging the batteryWhen you find that the percentage of power remaining is low or when the power alarm alerts you that theremaining power is low, you need to charge your battery or replace it with a charged battery.If an ac outlet is convenient, plug the ac power adapter into it, and then insert the connector into thecomputer. The battery will be fully charged in about three to six hours. This is affected by the battery sizeand the physical environment. You can check the battery charging status at any time through the batterystatus icon in the Windows notification area.Note: To maximize the life of the battery, the computer does not start recharging the battery if the remainingpower is greater than 95%.Maximizing the battery lifeTo maximize the life of the battery, do the following:• Use the battery until the charge is completely depleted.• Recharge the battery completely before using it. You can see whether the battery is fully charged from thebattery status icon in the Windows notification area.• Always use power management features such as power-saving modes.Managing the battery powerTo achieve the best balance between performance and power saving, adjust your power plan settings.To access power plan settings, do the following:1. Move your pointer to the bottom of the screen to display the taskbar and then click the battery-statusicon.2. Click More power options ➙Change plan settings.3. Follow the instructions on the screen.For more information, refer to the help information system of the program.Power-saving modesThere are several modes that you can use at any time to conserve power. This section introduces eachmode and gives tips on the effective use of battery power.•Screen blank mode (for Windows 7 only)The computer display requires considerable battery power. To turn off the power to the display and makethe computer enter screen blank mode, right-click the battery gauge icon in the Windows notification areaand select Power off display.Chapter 2.Using your computer 29
•Sleep modeIn sleep mode, your work is saved to memory, and then the hard disk drive, hybrid drive, or solid-statedrive and the computer display are turned off. When your computer wakes up, your work is restoredwithin seconds.Depending on the model, your computer might support the 30 Day Standby function. When this functionis enabled, the computer consumes even less power in sleep mode and takes only seconds to resumenormal operation when you press the power button. For more information about the 30 Day Standbyfunction, do the following:– For Windows 7: Refer to the help information system of the Power Manager program. For instructionson how to start the Power Manager program, see “Accessing Lenovo programs on the Windows 7operating system” on page .– For Windows 8.1: Open the Lenovo Settings program and click Power ➙30 Day Standby.To put your computer into sleep mode, do the following:– For Windows 7: Use the Start menu shutdown option.– For Windows 8.1: Move the pointer to the top-right or bottom-right corner of the screen to bring up thecharms. Then click Settings ➙Power ➙Sleep.•Hibernation modeBy using this mode, you can turn off your computer completely without saving files or exiting anyprograms that are running. When the computer enters hibernation mode, all open programs, folders, andfiles are saved to the hard disk drive, hybrid drive, or solid-state drive, and then the computer turns off.If you put your computer into hibernation mode with the wake-up function disabled, the computer doesnot consume any power. The wake-up function is disabled by default. If you put your computer intohibernation mode with the wake-up function enabled, the computer consumes a small amount of power.To enable the wake-up function, do the following:1. Go to Control Panel and click System and Security.2. Click Administrative Tools.3. Click Task Scheduler. If you are prompted for an administrator password or confirmation, type thepassword or provide confirmation.4. From the left pane, select the task folder for which you want to enable the wake-up function. Thescheduled tasks are displayed.5. Click a scheduled task, and then click the Conditions tab.6. Under Power, select the check box for Wake the computer to run this task.To put the computer into hibernation mode, change your power plan settings by doing the following:– For Windows 7: Start the Power Manager program and then click the Power Plan tab. Then followthe instructions on the screen. For instructions on how to start the Power Manager program, see“Accessing Lenovo programs on the Windows 7 operating system” on page .– For Windows 8.1: Go to the desktop. Right-click the battery status icon in the Windows notificationarea and click Power Options, click Change plan settings that is next to your power plan. Thenfollow the instructions on the screen.•Wireless offWhen you are not using the wireless features, such as Bluetooth or wireless LAN, turn them off. Thiswill help conserve power. To turn off the wireless features, press F8.Handling the batteryThis system supports only batteries specially designed for this specific system and manufactured by Lenovoor an authorized builder. The system does not support unauthorized batteries or batteries designed for other30 User Guide
systems. If an unauthorized battery or a battery designed for another system is installed, the system willnot charge.Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, andprovides no warranties for failures or damage arising out of their use.Note: If an unauthorized battery is installed, the following message will be displayed: “The battery installedis not supported by this system and will not charge. Please replace the battery with the correct Lenovobattery for this system.”DANGERDo not attempt to disassemble or modify the battery.Attempting to do so can cause an explosion, or liquid leakage from the battery.A battery other than the one specified by Lenovo, or a disassembled or modified battery is notcovered by the warranty.DANGERIf the rechargeable battery is incorrectly replaced, there is danger of an explosion. The batterycontains a small amount of harmful substances. To avoid possible injury:• Replace only with a coin-cell battery of the type recommended by Lenovo.• Keep the battery away from fire.• Do not expose it to excessive heat.• Do not expose it to water or rain.• Do not short-circuit it.• Store it in a cool dry place.• Keep it away from children.The battery is a consumable supply. If your battery begins to discharge too quickly, replace the batterywith a new one of the type recommended by Lenovo. For more information about replacing the battery,contact your Customer Support Center.DANGERDo not drop, crush, or puncture the battery, or make it subject to strong forces. Battery abuse ormishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from thebattery or coin-cell battery. If your battery is damaged, or if you notice any discharge from yourbattery or the buildup of foreign materials on the battery leads, stop using the battery and obtain areplacement from the battery manufacturer.DANGEROnly recharge the battery strictly according to instructions included in the product documentation.Chapter 2.Using your computer 31
DANGERDo not put the battery in trash that is disposed of in landfills. When disposing of the battery, complywith local ordinances or regulations and your company's safety standards.DANGERThere is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium batterycontains lithium and can explode if it is not properly handled, or disposed of. Replace only with abattery of the same type. To avoid possible injury or death, do not: (1) throw or immerse into water,(2) allow it to heat to more than 100°C (212°F), or (3) attempt to repair or disassemble it. Dispose ofit as required by local ordinances or regulations and your company's safety standards.Connecting to the networkYour computer has one or more network cards that enable you to connect your computer to the Internetand other network connections.Ethernet connectionsYou can connect your computer to a local network or a broadband connection by using the built-in Ethernetfeature of the computer.DANGERYour computer has an Ethernet connector. To avoid the risk of electrical shock, do not connectthe telephone cable to the Ethernet connector.Wireless connectionsWireless connection is the transfer of data without the use of cables but by means of radio waves only.Attention:• If you want to use the wireless features on an airplane, check the wireless services with the airline beforeboarding the airplane.• If there are restrictions on the use of computer wireless features on an airplane, you need to disable thewireless features of your computer before boarding.Depending on the wireless devices installed on your computer, you might be able to use the followingwireless networks:• Wireless LAN connection• Bluetooth connectionUsing the wireless LAN connectionA wireless local area network (LAN) covers a relatively small geographic area, such as an office building or ahouse. Devices based on the 802.11 standards can connect to this type of network.Your computer comes with a built-in wireless network card and a configuration utility to help you establishwireless connections and monitor the connection status. This enables you to stay connected to your networkwhile you are at the office, in a meeting room, or at home, with no need for a wired connection.32 User Guide
To establish a wireless LAN connection, do the following:For Windows 7:1. Press F8 and follow the instructions on the screen to enable the wireless feature.2. Click the wireless-network-connection-status icon in the Windows notification area. A list of availablewireless networks is displayed.3. Double-click a network to connect to it. Provide required information if needed.For Windows 8.1:1. Go to the desktop and click the wireless-network-connection-status icon in the Windows notificationarea. A list of available wireless networks is displayed.Note: To display the list, ensure that airplane mode (flight mode) is set to off.2. Double-click a network to connect to it. Provide required information if needed.If you need to connect to different wireless networks in different locations, use the following software tomanage multiple network profiles so that the computer automatically connects to an available network whenthe location changes:• For Windows 7: Use the Access Connections program. For more information, see “Accessing Lenovoprograms on the Windows 7 operating system” on page .• For Windows 8.1: Open the Lenovo Settings program and click Location Awareness. For moreinformation, see “Accessing Lenovo programs on Windows 8.1 operating system” on page .Tips for using the wireless LAN featureTo achieve the best connection, use the following guidelines:• Place your computer so that there are as few obstacles as possible between the wireless LAN accesspoint and the computer.• Open your computer lid to an angle of slightly more than 90 degrees.• If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a Bluetoothoption, the data transmission speed can be delayed and the performance of the wireless feature can bedegraded.Checking the wireless-LAN connection statusYou can check the wireless-LAN connection status through the wireless-network-connection-status icon inthe Windows notification area. The more bars encompassed, the better the signal is.For the Windows 7 operating system, you also can check the Access Connections gauge, the AccessConnections status icon, or the Access Connections wireless status icon in the Windows notification area.Access Connections gauge:•Power to the wireless radio is off or no signal.•Power to the wireless radio is on. The signal strength of the wireless connection is poor. Toimprove signal strength, move your computer closer to the wireless access point.•Power to the wireless radio is on. The signal strength of the wireless connectionis marginal.•Power to the wireless radio is on. The signal strength of the wireless connectionis excellent.Chapter 2.Using your computer 33
Access Connections status icon:•No location profile is active or none exists.•Current location profile is disconnected.•Current location profile is connected.Access Connections wireless status icon•Power to the wireless radio is off.•Power to the wireless radio is on. No association.•Power to the wireless radio is on. No signal.•Power to the wireless radio is on. The signal strength of the wireless connection is excellent.•Power to the wireless radio is on. The signal strength of the wireless connection is marginal.•Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improvesignal strength, move your computer closer to the wireless access point.Using BluetoothBluetooth can connect devices a short distance from one another, and is commonly used for connectingperipheral devices to a computer, transferring data between hand-held devices and a personal computer, orremotely controlling and communicating with devices such as mobile phones.Depending on the model, your computer might support the Bluetooth feature. To transfer data throughthe Bluetooth feature, do the following:Note: If you use the wireless feature (the 802.11 standards) of your computer simultaneously with aBluetooth option, the data transmission speed can be delayed and the performance of the wireless featurecan be degraded.•For Windows 7:1. Press F8 and then follow the instructions on the screen to enable the Bluetooth feature.2. Right-click the data that you want to send.3. Select Send To ➙Bluetooth Devices.4. Select a Bluetooth device, and then follow the instructions on the screen.•For Windows 8.1:1. Go to the desktop, and then right-click the data that you want to send.2. Select Send To ➙Bluetooth Devices.3. Select a Bluetooth device, and then follow the instructions on the screen.For more information, refer to the Windows help information system and the Bluetooth help informationsystem.Using an external displayYou can use an external display such as a projector or a monitor to give presentations or to expand yourworkspace. This topic introduces how to connect an external display, choose display modes, and changedisplay settings.Your computer supports the following video resolution, provided that the external monitor also supports thatresolution.34 User Guide
• Up to 1920 x 1200, with an external display connected to the VGA connector• Up to 2560 x 1600, with an external display connected to the mini DisplayPort connectorFor more information about the external display, refer to the manuals provided with it.Connecting an external displayYou can use either a wired display or a wireless display. The wired display can be connected to the HDMI,VGA, or mini DisplayPort connector by a cable. The wireless display can be added through the Wi-Di orMiracast function.•Connecting a wired displayNote: When you connect an external monitor, a video interface cable with a ferrite core is required.1. Connect the external display to an appropriate video connector on your computer, such as the VGAconnector, mini DisplayPort connector, or HDMI connector.2. Connect the external display to an electrical outlet.3. Turn on the external display.If your computer cannot detect the external display, right-click on the desktop, then click Screenresolution ➙Detect.•Connecting a wireless displayNote: To use a wireless display, ensure that both your computer and the external display support theWi-Di or Miracast feature.–For Windows 7Open the Lenovo QuickDisplay program and follow the instructions on the screen. For how to accessthe Lenovo QuickDisplay program, see “Lenovo programs” on page 12.–For Windows 8.11. Move your pointer to the top-right or bottom-right corner of the screen to display the charms.2. Click Devices ➙Projector ➙Add a wireless display.3. Select the desired wireless display and follow the instructions on the screen.For more information, see the help information systems of the Lenovo QuickDisplay program and theWindows 8.1 operating system.Choosing a display modeYou can display your desktop and apps on the computer display, the external display, or both. To choosehow to display the video output, press the display-mode switching key and then select a displaymode you prefer.There are four display modes:•Disconnect: Displays the video output only on your computer screen.Note: Depending on the situation, you might see Disconnect,PC screen only,Computer only, orDisconnect projector.•Duplicate: Displays the same video output on both your computer screen and an external display.•Extend: Extends the video output from your computer display to an external display. You can drag andmove items between the two displays.•Projector only: Shows the video output only on an external display.Chapter 2.Using your computer 35
Note: Depending on the situation, you might see Projector only or Second screen only.Note: If you show DOS or programs using DirectDraw or Direct3D®in full-screen mode, only the maindisplay shows the video output.Changing display settingsYou can change the display settings, such as the display resolution, font size, and so on.To change the display settings, do the following:1. Go to Control Panel and click Appearance and Personalization.2. Click Display for further configuration.3. Click Apply. The change will take effect after you log off.Using audio featuresYour computer is equipped with the following items:• Speakers• Microphones• Combo audio connector, 3.5 mm (0.14 inch) in diameterYour computer also has an audio chip that enables you to enjoy various multimedia audio features, suchas the following:• Compliant with Intel High Definition Audio• Playback of Musical Instrument Digital Interface (MIDI) and Moving Picture Experts Group Audio Layer-3(MP3) files• Recording and playback of pulse-code modulation (PCM) and Waveform Audio File Format (WAV) files• Recording from various sound sources, such as a headset attachedThe following table shows the supported functions of the audio devices attached to the computer, theThinkPad OneLink Dock, or ThinkPad OneLink Pro Dock.Table 3. Audio feature listConnector Headset with a 3.5–mm,4-pole plugConventional headphone Conventional microphoneCombo audio connector Headphone andmicrophone functionssupportedHeadphone functionsupportedNot supportedCombo audio connectorof the supported ThinkPadOneLink Dock or ThinkPadOneLink Pro DockHeadphone andmicrophone functionssupportedHeadphone functionsupportedNot supportedConfiguring for sound recordingTo configure the microphone for optimal sound recording, use the SmartAudio program. To start theprogram, go to Control Panel and click Hardware and Sound ➙SmartAudio.36 User Guide
Using the cameraIf your computer has an integrated camera, you can use the camera to preview your video image andtake a snapshot of your current image.To start the camera and configure the camera settings, do the following:• For Windows 7: Open the Communications Utility program.• For Windows 8.1: Click Camera from the Start screen.When the camera is started, the green camera-in-use indicator turns on.You also can use the integrated camera with other programs that provide features such as photographing,video capturing, and video conferencing. To use the integrated camera with other programs, open one of theprograms and start the photographing, video capturing, or video conferencing function. Then, the camerawill start automatically and the camera status indicator turns on green. For more information about using thecamera with a program, refer to the documentation that came with the program.Configuring camera settingsYou can configure the camera settings to meet your needs, such as adjusting the quality of the video output.To configure the camera settings, do the following:• For Windows 8.1, do one of the following:– Configure the camera settings directly from the program that is using the camera. For more information,see the help information system of the program.– Open the Lenovo Settings program. Then click Camera. Follow the instructions on the screen toconfigure the camera settings as desired.• For Windows 7: Start the Communications Utility program and configure the camera settings as desired.Using a flash media cardYour computer has one media-card slot.The media-card slot supports the following four types of cards:• MultiMediaCard (MMC)• Secure Digital eXtended-Capacity (SDXC) card• Secure Digital (SD) card• Secure Digital High-Capacity (SDHC) cardNote: Your computer does not support the CPRM feature for the SD card.Attention: While transferring data to or from a flash media card, such as an SD card, do not put yourcomputer into sleep or hibernation mode before the data transfer completes; otherwise, your data couldbecome damaged.Inserting a flash media cardAttention: Before you start installing a flash media card, touch a metal table or a grounded metal object.This action reduces any static electricity from your body.To insert a flash media card, do the following:Chapter 2.Using your computer 37
1. Locate the appropriate type of slot for your card. See “Locating computer controls, connectors, andindicators” on page 1.2. Ensure that the metal contacts are facing down and pointing toward to the card slot.3. Press the card firmly into the card slot.If the plug-and-play feature is not enabled, do the following:1. Go to Control Panel.2. Click Hardware and Sound.3. Click Device Manager. If you are prompted for an administrator password or confirmation, type thepassword or provide confirmation.4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.5. Follow the instructions on the screen.Removing a flash media cardAttention:• Stop all the activities involving the card before removing it. Otherwise, data on the card might bedamaged or lost.• Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the systemmight not respond when you try to resume operation.To remove a flash media card, do the following:1. Click the triangular icon in the Windows notification area to show hidden icons.2. Right-click the Safely Remove Hardware and Eject Media icon.3. Select the corresponding item to eject the card from the Windows operating system.4. Press the card to eject it from your computer.5. Remove the card and store it safely for future use.Note: If you do not remove the card from your computer after you eject the card from the Windows operatingsystem, the card can no longer be accessed. To access the card, you must remove it first, then insert it again.38 User Guide
Chapter 3. Enhancing your computerThis chapter provides instructions on how to use hardware devices to expand your computer capabilities.• “Finding ThinkPad options” on page 39• “ThinkPad OneLink Dock” on page 39• “ThinkPad OneLink Pro Dock” on page 40Finding ThinkPad optionsIf you want to expand the capabilities of your computer, Lenovo has a number of hardware accessoriesand upgrades to meet your needs. Options include memory modules, storage devices, network cards, portreplicators, batteries, power adapters, printers, scanners, keyboards, mice, and more.You can shop at Lenovo 24 hours a day, 7 days a week directly over the World Wide Web. All you need is anInternet connection and a credit card.To shop at Lenovo, go to:http://www.lenovo.com/accessories/services/index.htmlThinkPad OneLink DockDepending on the model, your computer might support the ThinkPad OneLink Dock (hereafter referred to asthe dock). Attach your computer to the dock to expand the working capability.This topic provides basic information about the dock. For detailed information about using the dock, referto the documentation that comes with the dock.Note: Depending on the model, your dock might look slightly different from the illustrations in this topic.Front view1Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such asa Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or othernon-permanent fixture.© Copyright Lenovo 2014 39
2USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.3Always-on USB connector: By default, the Always-on USB connector enables you to charge somemobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode,or is off. For more information, refer to the documentation that comes with the dock.4Combo audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch),4-pole plug.5System-status indicator: The indicator on the illuminated ThinkPad logo functions the same as the oneson the computer. For details, see “Status indicators” on page 6.6Power button: The power button on the dock functions the same as the one on the computer.Rear view1USB 2.0 connector: Used to connect devices that are compatible with USB 2.0.2Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connectorhave the same function as the ones on the computer.3HDMI connector: Used to connect a digital audio device or video monitor that is compatible with HDMI.4Power connector: Used to connect the ac power adapter.5Lenovo OneLink connector: Connect the Lenovo OneLink connector to the computer.ThinkPad OneLink Pro DockDepending on the model, your computer might support the ThinkPad OneLink Pro Dock (hereafter referred toas the dock). Attach your computer to the dock to expand the working capability.This topic provides basic information about the dock. For detailed information about using the dock, referto the documentation that comes with the dock.Note: Depending on the model, your dock might look slightly different from the illustrations in this topic.40 User Guide
Front view1Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such asa Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or othernon-permanent fixture.2USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.3Always-on USB connector: By default, the Always-on USB connector enables you to charge somemobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode,or is off. For more information, refer to the documentation that comes with the dock.4Combo audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch),4-pole plug.5System-status indicator: The indicator on the illuminated ThinkPad logo functions the same as the oneson the computer. For details, see “Status indicators” on page 6.6Power button: The power button on the dock functions the same as the one on the computer.Rear viewChapter 3.Enhancing your computer 41
1USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0.2USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0 and USB 2.0.3Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connectorhave the same function as the ones on the computer.4DisplayPort®connector: Used to attach a high-performance monitor, a direct-drive monitor, or otherdevices that use a DisplayPort connector.5Power connector: Used to connect the ac power adapter.6DVI connector: Used to connect a monitor that supports Digital Visual Interface (DVI) connection.7Lenovo OneLink connector: Connect the Lenovo OneLink connector to the computer.42 User Guide
Chapter 4. SecurityThis chapter provides information about how to protect your computer from theft and unauthorized use.• “Attaching a mechanical lock” on page 43• “Using passwords” on page 43• “Hard disk security” on page 48• “Using the fingerprint reader” on page 48• “Notice on deleting data from your hard disk drive, hybrid drive, or solid-state drive” on page 50• “Using firewalls” on page 51• “Protecting data against viruses” on page 51Attaching a mechanical lockYou can attach a mechanical lock to your computer, to help prevent it from being removed without yourpermission.Attach a mechanical lock to the keyhole of the computer; then secure the chain on the lock to a stationaryobject. Refer to the instructions shipped with the mechanical lock.Note: You are responsible for evaluating, selecting, and implementing the locking device and securityfeature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performanceof the locking device and security feature.Using passwordsYou can help prevent your computer from unauthorized use by using passwords. Once you set a password,a prompt is displayed on the screen each time you turn on the computer. Enter your password at the prompt.You cannot use the computer unless you type the correct password.If you have set a power-on password, a supervisor password, or a hard disk password, it unlocksautomatically when the computer resumes from sleep mode.Note: If a Windows password has been set, you will be prompted to enter it.Typing passwordsWhen this icon is displayed, type a power-on password or a supervisor password.When this icon is displayed, type a user hard disk password. To type a master hard disk password,press F1. When the icon changes to , type the master hard disk passwordNote: To return to the icon , press F1 again.Power-on passwordYou can set a power-on password to help protect your computer against unauthorized access.© Copyright Lenovo 2014 43
If you set a power-on password, the password prompt is displayed on the screen whenever you turn on thecomputer. You must enter the correct password to start using the computer.Setting, changing, or removing a power-on passwordBefore you start, print these instructions.To set, change, or remove a power-on password, do the following:1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.3. Select Security ➙Password ➙Power-on Password by using the directional keys.4. Depending on your need, do one of the following:• To set a password, do the following:a. In the Enter New Password field, type a desired password and press Enter.b. In the Confirm New Password field, retype the password and press Enter.• To change a password, do the following:a. In the Enter Current Password field, type the current power-on password and press Enter.b. In the Enter New Password field, type the new power-on password and press Enter; then retypethe password in the Confirm New Password field and Press Enter.• To remove a password, do the following:a. In the Enter Current Password field, type the current power-on password and press Enter.b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.5. A Setup Notice window is displayed. Press Enter to continue.6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changesand exit.Note: You might want to record your password and store it in a safe place. Otherwise, if you forget thepassword, you have to take your computer to a Lenovo reseller or a marketing representative to havethe password canceled.Supervisor passwordThe supervisor password protects the system information stored in the ThinkPad Setup program. If you haveset a supervisor password, no one can change the configuration of the computer without the password. Itprovides the following security features:• If only a supervisor password is set, a password prompt is displayed when you try to start the ThinkPadSetup program. Unauthorized users cannot access the ThinkPad Setup program without the password.• The system administrator can use the supervisor password to access a computer even if the user of thatcomputer has set a power-on password. The supervisor password overrides the power-on password.• If both a supervisor password and a power-on password are set, you can do the following only if youhave the supervisor password:– Changing or deleting the power-on password– Changing or deleting the supervisor password– Changing date and time– Specifying the minimum length for power-on password and hard disk password– Changing the setting for the security chip– Erasing the fingerprint data44 User Guide
– Enabling or disabling the following features:– Wake on LAN and Flash over LAN– Lock UEFI BIOS Settings– Password at unattended boot– Boot Device List F12 Option– Boot Order Lock– Flash BIOS Updating by End-Users– Internal network device– Internal wireless device– Internal Bluetooth device– Internal Network Option ROM– Security mode– Fingerprint reader priorityNotes:• The system administrator can set the same supervisor password on many ThinkPad notebook computersto make administration easier.• When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To changethe settings, a supervisor password is required.Setting, changing, or removing a supervisor passwordBefore you start, print these instructions.Only a system administrator can set, change, or remove a supervisor password. To set, change, or remove asupervisor password, do the following:1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.3. Select Security ➙Password ➙Supervisor Password by using the directional keys.4. Depending on your needs, do one of the following:• To set a password, do the following:a. In the Enter New Password field, type a desired password and press Enter.b. In the Confirm New Password field, retype the password and press Enter.• To change a password, do the following:a. In the Enter Current Password field, type the current supervisor password and press Enter.b. In the Enter New Password field, type the new supervisor password and press Enter; then retypethe password in the Confirm New Password field and press Enter.• To remove a password, do the following:a. In the Enter Current Password field, type the current supervisor password and press Enter.b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.5. A Setup Notice window is displayed. Press Enter to continue.6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changesand exit.Chapter 4.Security 45
Note: You might want to record your password and store it in a safe place. The next time you open theThinkPad Setup program, you will be prompted to type your supervisor password to proceed. If you forgetyour supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovoreseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase isrequired, and a fee will be charged for parts and service.Hard disk passwordsThe following two types of hard disk passwords can help protect the information stored on the hard diskdrive, hybrid drive, or solid-state drive:•User hard disk passwordIf a user hard disk password has been set, but no master hard disk password has been, the user mustenter the user hard disk password to access files and applications on the hard disk drive, hybrid drive, orsolid-state drive.•Master hard disk passwordThe master hard disk password also requires a user hard disk password. The master hard disk passwordis usually set and used by a system administrator. It enables the administrator to access any hard diskdrive, hybrid drive, or solid-state drive in a system like a master key. The administrator sets the masterpassword; then assigns a user password for each computer in the network. The user can then change theuser password as desired, but the administrator still can get access by using the master password.When a master hard disk password is set, only the administrator can remove the user hard disk password.Setting a hard disk passwordBefore you start, print these instructions.To set a hard disk password, do the following:1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.3. Select Security ➙Password ➙Hard disk 1 Password by using the directional keys.4. A password window is displayed. You are prompted to select User or User + Master. Select User ifyou want to set only one hard disk password. Select User + Master if you want to set a user hard diskpassword and a master hard disk password, for example if you are an administrator or a supervisor.• If you select User, do the following:a. When a window for typing the new password opens, type your new password in the Enter NewPassword field and press Enter.b. In the Confirm New Password field, retype the password you just entered and press Enter.• If you select User + Master, do the following:a. First, set a user hard disk password. When a message window prompts you to set the user harddisk password, press Enter to continue. Type your new user hard disk password in the EnterNew Password field and press Enter. Retype the password in the Confirm New Passwordfield and press Enter.b. Then, set a master hard disk password. When a message window prompts you to set the masterhard disk password. Press Enter to continue. Type your new master hard disk password in theEnter New Password field and press Enter. Retype the password in the Confirm New Passwordfield and press Enter.5. A Setup Notice window is displayed. Press Enter to continue.6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changesand exit.46 User Guide
The next time you turn on your computer, type the user or master hard disk password to start your computerand access the operating system.Changing or removing a hard disk passwordTo change or remove the hard disk password, do the following:• If you are in User + Master hard disk mode, you can select either User HDP or Master HDP to changethe password, depending on your needs.– If you select User HDP mode, follow the following steps to change the user hard disk password:1. Type the current user hard disk password in the Enter Current Password field and press Enter.2. Type the new password in the Enter New Password field and press Enter; then retype thepassword in the Confirm New Password field and press Enter.3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk passwordis changed.Note: The hard disk password cannot be removed in User HDP mode.– If you select Master HDP mode, follow the following steps to change the master hard disk password:1. Type the current master hard disk password in the Enter Current Password field and press Enter.2. Type the new master hard disk password in the Enter New Password field and press Enter; thenretype the new password you just entered in the Confirm New Password field and press Enter.3. A Setup Notice window is displayed. Press Enter to continue. The master hard disk password ischanged.Note: If you leave the Enter New Password and Confirm New Password fields blank and press Entertwice, both the user and master hard disk passwords are removed.• If you are in User hard disk mode, follow the following steps to change the user hard disk password:1. Follow steps 1 through 7 in “Setting a hard disk password” on page 46, typing your password to getaccess to the ThinkPad Setup program.2. Type the current user hard disk password in the Enter Current Password field and press Enter.3. Type the new password in the Enter New Password field and press Enter; then retype the newpassword in the Confirm New Password field and press Enter.4. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password ischanged.Note: If you leave the Enter New Password and Confirm New Password fields blank and press Entertwice, the user hard disk password is removed.Tips on using the hard disk passwords• You can set the minimum length of a hard disk password through the Security menu.• If you set a hard disk password of over seven characters, the hard disk drive, hybrid drive, or solid-statedrive can be used only with a computer that can recognize a hard disk password of over seven characters.If you then install the hard disk drive, hybrid drive, or solid-state drive in a computer that cannot recognizea hard disk password that contains more than seven characters, you cannot access the drive.• Record your password and store it in a safe place. If you forget the user hard disk password, or bothuser and master hard disk passwords, Lenovo cannot reset your passwords or recover data from thehard disk drive, hybrid drive, or solid-state drive. You must take your computer to a Lenovo reseller or amarketing representative to have the hard disk drive, hybrid drive, or solid-state drive replaced. Proof ofpurchase is required, and a fee will be charged for parts and service.Chapter 4.Security 47
Hard disk securityTo protect passwords from unauthorized security attacks, refer to the following tips to maximize security:• Set a power-on password as well as a hard disk password for your internal hard disk drive, hybrid drive,or solid-state drive. Refer to the procedures in “Power-on password” on page 43 and “Hard diskpasswords” on page 46. For security, a longer password is recommended.• If a Disk Encryption hard disk drive, Disk Encryption hybrid drive, or a Disk Encryption solid-state drive isinstalled in your computer, be sure to protect the contents of your computer memory from unauthorizedaccess by use of drive encryption software.• Before you dispose of, sell, or hand over your computer, delete the data stored on it. For more information,refer to “Notice on deleting data from your hard disk drive, hybrid drive, or solid-state drive” on page 50.The hard disk drive, hybrid drive, or solid-state drive built into your computer can be protected by UEFI BIOS.Disk Encryption hard disk drive, Disk Encryption hybrid drive, and Encryption solid-state driveSome models contain the Disk Encryption hard disk drive, Disk Encryption hybrid drive, or Encryptionsolid-state drive. This feature helps to protect your computer against security attacks on media, NAND flash,or device controllers by use of a hardware encryption chip. For the efficient use of the encryption feature, seta hard disk password for the internal storage device.Using the fingerprint readerDepending on the model, your computer might have a fingerprint reader. Fingerprint authentication canreplace your Windows password. In this way, you can log on to your computer simply and securely. Toenable fingerprint authentication, enroll your fingerprints first.Enrolling your fingerprintTo enroll your fingerprints, do the following:1. Start the Lenovo Fingerprint Manager program. For instructions on how to start the Fingerprint ManagerPro program, see “Lenovo programs” on page .2. Enter the Windows password as required.3. Click the icon for the finger that you want to enroll, and constantly swipe your corresponding fingeracross the fingerprint reader until the enrollment completes. For more information, see “Swiping yourfinger over the fingerprint reader” on page 48.4. Click Finish. Your fingerprint is enrolled successfully.Note: It is recommended that you enroll more than one fingerprint in case of any injuries to your fingers.Swiping your finger over the fingerprint readerTo swipe your finger over the reader, do the following:48 User Guide
1. Place the top joint of your finger on the sensor.2. Apply light pressure and swipe your finger toward you across the the reader in one smooth motion.Do not lift your finger when you are swiping it.Maintaining the fingerprint readerThe following actions could damage the fingerprint reader or cause it not to work properly:• Scratching the surface of the reader with a hard, pointed object.• Scraping the surface of the reader with your fingernail or anything hard.• Using or touching the reader with a dirty finger.If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-freecloth:• The surface of the reader is dirty or stained.• The surface of the reader is wet.Chapter 4.Security 49
• The reader often fails to enroll or authenticate your fingerprint.If your finger has any of the following conditions, you might not be able to register or authenticate it:• Your finger is wrinkled.• Your finger is rough, dry, or injured.• Your finger is stained with dirt, mud, or oil.• The surface of your finger is different from when you enrolled your fingerprint.• Your finger is wet.• A finger is used that has not been enrolled.To improve the situation, try the following:• Clean or wipe your hands to remove any excess dirt or moisture from the fingers.• Enroll and use a different finger for authentication.• If your hands are dry, apply lotion to them.For more information on how to use the fingerprint reader, refer to the help system of the Lenovo FingerprintManager program.Notice on deleting data from your hard disk drive, hybrid drive, orsolid-state driveSome of the data stored on the hard disk drive, hybrid drive, or solid-state drive might be sensitive. Handingyour computer over to someone else without deleting the loaded software, such as operating systems andapplication software, might even violate license agreements. Be sure to delete data stored on the hard diskdrive, hybrid drive, or solid-state drive before you dispose of, sell, or hand over your computer.You can use the following methods to delete data from the hard disk drive, hybrid drive, or solid-state drive:• Move the data to the Recycle Bin, and then empty the Recycle Bin.• Delete the data.• Format your hard disk drive, hybrid drive, or solid-state drive, using the software for initializing it.• Use the recovery program provided by Lenovo to bring the hard disk drive, hybrid drive, or solid-statedrive back to the factory default settings.These operations, however, only change the file location of the data; they do not delete the data itself. Inother words, the data retrieval processing is disabled under an operating system such as Windows. Thedata is still there, even though it seems to be lost. Thus, it is sometimes possible to read the data by use ofspecial software for data recovery. There is a risk that people of bad faith might read and misuse the criticaldata on hard disk drives, hybrid drives, or solid-state drives for unexpected purposes.To prevent leakage of data, it is important that you delete all the data from the hard disk drive or hybrid drivewhen you dispose of, sell, or hand over your computer. You can destroy the data physically by smashing thehard disk drive or hybrid drive with a hammer, or magnetically by means of strong magnetic power, thusmaking the data unreadable. But it is recommended that you use the software (payware) or service (payservice) developed for that purpose. The process might take several hours.For disposing of data on the solid-state drive, Lenovo provides the Drive Erase Utility for Resetting theCryptographic Key and Erasing the Solid State Drive tool. For disposing of data on the hard disk drive, Lenovoprovides the Secure Data Disposal™tool. Go to http://www.lenovo.com/support to download these tools.50 User Guide
If a Disk Encryption hard disk drive, a Disk Encryption hybrid drive, or an Encryption solid-state drive or issupported and installed in your computer, you can logically dispose of all the data on the drive in a shorttime by erasing the cryptographic key. The data encrypted with the old key is not physically erased butremains on the drive; however, it cannot be decrypted without the old key. This feature is also available withthe Drive Erase Utility for Resetting the Cryptographic Key and Erasing the Solid State Drive tool.Using firewallsIf your system is preinstalled with a firewall program, it protects against computer Internet security threats,unauthorized access, intrusions, and Internet attacks. It also protects your privacy.For more information about how to use the firewall program, refer to the help information system thatcomes with the program.Protecting data against virusesYour computer is preinstalled with an antivirus program so you can detect and eliminate viruses. Theantivirus program is designed to help you detect and eliminate viruses.Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After30 days, you must renew the license to continue receiving the antivirus software updates.For more information about how to use your antivirus software, refer to the help information system ofyour antivirus software.Chapter 4.Security 51
52 User Guide
Chapter 5. Advanced configurationThis chapter provides the following information to help you configure the computer:• “Installing a new operating system” on page 53• “Installing device drivers” on page 55• “Using the ThinkPad Setup program” on page 55Installing a new operating systemIn some situations, you might need to install a new operating system. This topic provides instructions onhow to install a new operating system.Installing the Windows 7 operating systemBefore you start, print these instructions.Attention: The process of installing a new operating system deletes all the data on your hard disk drive,hybrid drive, or solid-state drive, including the data that were stored in a hidden folder.To install the Windows 7 operating system, do the following:1. Copy all the subdirectories and files in the  directory to a removable storage device.• The supplement files for the Windows 7 operating system are in the  directory.• The device drivers are in the  directory.• The preinstalled programs are in the  directory.2. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 55.3. Select Startup ➙UEFI/Legacy Boot. Then do one of the following:• To install the Windows 7 (32-bit) operating system, select Legacy Only or Both.• To install the Windows 7 (64-bit) operating system in Legacy mode, select Legacy Only.• To install the Windows 7 (64-bit) operating system in UEFI mode, select UEFI Only.4. Press the F10 key to exit the ThinkPad Setup program.5. Insert the Windows 7 operating system installation DVD into the external optical drive, and restart thecomputer.6. Restore the  directory that you backed up before installing the Windows 7 operating system.7. Install the device drivers. See “Installing device drivers” on page 55.8. Install the Windows 7 fix modules. You can find the Windows 7 fix modules in the directory. For more information, go to the Microsoft Knowledge Base home page at:http://support.microsoft.com/9. Install the registry patches, for example the Enabling Wake on LAN from Standby for ENERGY STARpatch. To download and install the registry patches, go to the Lenovo Support Web site at:http://www.lenovo.com/supportNote: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in theThinkPad Setup program. Otherwise the operating system will not start correctly.When you install the Windows 7 operating system, you might need one of the following country or regioncodes:© Copyright Lenovo 2014 53
Country or region Code Country or region CodeChina SC Netherlands NLDenmark DK Norway NOFinland FI Spain SPFrance FR Sweden SVGermany GR Taiwan and Hong Kong TCItaly IT United States USJapan JPInstalling the Windows 8.1 operating systemBefore you start, print these instructions.Attention: The process of installing a new operating system deletes all the data on your hard disk drive,hybrid drive, or solid-state drive, including the data that were stored in a hidden folder.To install the Windows 8.1 operating system, do the following:1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 55.2. Select Startup ➙Boot to display the Boot Priority Order submenu.3. Select the drive that contains the Windows 8.1 operating system installation program, for exampleUSB HDD.4. Press the F10 key to exit the ThinkPad Setup program.5. Connect the drive that contains the Windows 8.1 operating system installation program to the computer,and restart the computer.6. Install the Windows 8.1 fix modules. Go to the Microsoft Knowledge Base home page athttp://support.microsoft.com/. Type the number of the fix module in the search field, then click Search.7. Install the registry patches, for example the Enabling Wake on LAN from Standby for ENERGY STARpatch. To download and install the registry patches, go to the Lenovo Support Web site at:http://www.lenovo.com/support8. Install the device drivers. See “Installing device drivers” on page 55.Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in theThinkPad Setup program. Otherwise, the operating system will not start correctly.When you install the Windows 8.1 operating system, you might need one of the following country or regioncodes:Country or region Code Country or region CodeChina SC Netherlands NLDenmark DK Norway NOFinland FI Spain SPFrance FR Sweden SVGermany GR Taiwan and Hong Kong TCItaly IT United States USJapan JP54 User Guide
Installing device driversDevice driver is the program that operates a particular hardware device of the computer. If a device doesnot perform well or you install a new device, you need to install or update the corresponding device driver.For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need todownload and install the USB 3.0 driver.To download the latest device drivers, do the following:1. Go to http://www.lenovo.com/ThinkPadDrivers.2. Select your product name to view all the device drivers for your computer.3. Select the device drivers you that you need, and follow the instructions on the screen.Attention: Do not download the device drivers from the Windows Update Web. Always download the devicedrivers from:http://www.lenovo.com/ThinkPadDriversIf you use the Windows 7 operating system, you also can find the device drivers in the directory on your hard disk drive or solid-state drive. For more information, see “Reinstalling preinstalledprograms and device drivers” on page 95.Using the ThinkPad Setup programThe ThinkPad Setup program enables you to select various setup configurations for your computer throughconfiguring the BIOS.To configure the BIOS of your computer, do the following:1. Turn on the computer. When the ThinkPad logo is displayed, press F1. The ThinkPad Setup programstarts.If you are required to enter the supervisor password, enter the correct password. You also can pressEnter to skip the password prompt and start the ThinkPad Setup program. If you do not enter thepassword, you cannot change the configurations that are protected by the supervisor password. Formore information, refer to “Using passwords” on page 43.2. Use the cursor keys to select a tab; or use the cursor keys to locate an item and press Enter to select it.Then a submenu is displayed.Note: Some menu items are displayed only if the computer supports the corresponding features.3. Set the value of an item by doing one of the following:• Press the F6 key to change to a higher value.• Press the F5 key to change to a lower value.Note: Default values are in boldface.4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.5. When you complete the configuration, press the F10 key to save and exit. You also can select theRestart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.Note: You can press the F9 key to restore to the default settings.Main menuWhen you enter the ThinkPad Setup program, you will first see the Main menu as follows:•UEFI BIOS VersionChapter 5.Advanced configuration 55
•UEFI BIOS Date (Year-Month-Day)•Embedded Controller Version•ME Firmware Version (available on models with the Intel CPU)•Machine Type Model•System-unit serial number•System board serial number•Asset Tag•CPU Type•CPU Speed•Installed memory•UUID•MAC address (Internal LAN)•Preinstalled OS License•UEFI Secure BootConfig menuTo change the configuration of your computer, select the Config tab from the ThinkPad Setup menu.The following table lists the Config menu items.Attention: The default configurations are already optimized for you. Improper change of the configurationsmight cause unexpected results.Table 4. Config menu itemsMenu item Submenu item Selection CommentsWake On LAN • Disabled•AC Only• AC and BatteryEnable the computer topower on when the Ethernetcontroller receives a magicpacket (a special networkmessage).If you select AC Only, Wakeon LAN is enabled onlywhen the ac power adapteris attached.If you select AC andBattery, Wake on LAN isenabled with any powersources.Notes:• The magic packet typeWake on LAN requiresac power.• The Wake on LANfunction does notwork when a hard diskpassword is set.Ethernet LAN Option ROM • Disabled Loads the Ethernet LANOption ROM to enableNetwork56 User Guide
Table 4. Config menu items (continued)Menu item Submenu item Selection Comments(for Legacy Only bootmode or Both with Legacyfirst)•Enabled startup from an integratednetwork device.UEFI IPv4 Network Stack(for UEFI Only boot modeor Both with UEFI first)• Disabled•EnabledEnable or disable InternetProtocol Version 4 (IPv4)network stack for the UEFIenvironment.UEFI IPv6 Network Stack(for UEFI Only boot modeor Both with UEFI first)• Disabled•EnabledEnable or disable InternetProtocol Version 6 (IPv6)network stack for UEFIenvironment.UEFI PXE Boot Priority(for Both with UEFI firstboot mode, and IPv6and IPv4 stacks are bothenabled.)• IPv6 First•IPv4 FirstSelect network stackpriority for UEFI PXE boot.USB UEFI BIOS Support • Disabled•EnabledEnables or disables bootsupport for USB storagedevices.Always On USB • Disabled•EnabledIf you select Disabled,the external USB devicescannot be charged throughUSB connectors.Always On USB Charge inbattery mode•Disabled• EnabledIf you select Enabled, theAlways On USB connectorenables you to charge somemobile digital devices andsmartphones when thecomputer is powered off orin hibernation mode on thecondition that the ac poweradapter is connected.USBUSB 3.0 Mode • Disabled• Enabled•AutoSet the USB 3.0 controllermode for the ports sharedbetween USB 2.0 and USB3.0 controllers.If you select Auto, it enablesyou to connect and routeappropriate USB 3.0 orUSB 2.0 connectors.If you select Enabled, itenables USB 3.0 modeand allows USB 3.0 to besupported in the operatingsystem.If you select Disabled, itdisables and hides the USB3.0 controller, and USB 3.0Chapter 5.Advanced configuration 57
Table 4. Config menu items (continued)Menu item Submenu item Selection Commentsconnectors will work asUSB 2.0 connectors.Keyboard/Mouse Fn and Ctrl Key swap •Disabled• EnabledIf you select Enabled, theFn key works as the Ctrlkey, and the Ctrl key worksas the Fn key.Note: Even when Enabledis selected, you need topress the Fn key to resumethe computer from sleepmode to normal operation.Boot Display Device •ThinkPad LCD• Analog (VGA)• HDMI• Display on DockSelect the display devicethat is to be activated atboot time. This selectionis effective for boot time,password prompt, andThinkPad Setup.DisplayTotal Graphics Memory •256 MB• 512 MBAllocate total memorywhich Intel® internalgraphics device shares.Notes:• If you select 512 MB,the maximum usablememory may be reducedon the 32-bit operatingsystem.• This sub-menu isavailable on modelswith an Intel CPU.Intel SpeedStep®technology• Disabled•EnabledSelect the mode of IntelSpeedStep technology atruntime.•MaximumPerformance: Alwayshighest speed•Battery Optimized:Always lowest speed•Disabled: No runtimesupport, lowest speedNote: This sub-menu isavailable on models with anIntel CPU.Adaptive ThermalManagementScheme for AC•Maximize Performance• BalancedScheme for Battery• Maximize PerformanceIf you select MaximizePerformance, it reducesCPU throttling. If you selectBalanced, it balances thefan sound, the computertemperature, and thecomputer performance.Power58 User Guide
Table 4. Config menu items (continued)Menu item Submenu item Selection Comments•Balanced Note: This sub-menu isavailable on models with anIntel CPU.CPU Power Management • Disabled•EnabledEnable or disable thepower-saving feature thatstops the microprocessorclock automatically whenthere are no computeractivities. Normally, it is notnecessary to change thesetting.Intel (R) Rapid StartTechnology• Disabled•EnabledEnter after:• Immediately• 1 minute• 2 minutes• 5 minutes• 10 minutes• 15 minutes• 30 minutes• 1 hour• 2 hours•3 hoursTo use this feature, a specialpartition on the solid-statedrive is required.When enabled, thecomputer enters a lowerpower state after thespecified time in sleepstate. And it takes onlyseconds to resume normaloperation.Note: This sub-menu isavailable on models with anIntel CPU.Disable Built-in Battery • Yes• NoTemporary disable batteryfor servicing the system.After selecting this item, thesystem will be automaticallypowered off, then readyto be serviced. Note: thebattery will be automaticallyenabled when the ACadapter is recoonected.Password Beep • Disabled• EnabledEnable this option to havea beep sound when thesystem is waiting for apower-on, hard disk, orsupervisor password.Different beeps will soundwhen the entered passwordmatches or does not matchthe configured password.Beep and AlarmKeyboard Beep • Disabled•EnabledEnable this option tohave a beep soundwhen unmanageable keycombination are pressed.Chapter 5.Advanced configuration 59
Date and Time menuTo change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.Then do the following:1. Use the cursor keys to select System Date or System Time.2. Type a date or time.Security menuTo change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.The following table lists the Security menu items. Default values are in boldface.Attention: The default configurations are already optimized for you. Improper change of the configurationsmight cause unexpected results.Table 5. Security menu itemsMenu item Submenu item Selection CommentsSupervisor Password •Disabled• EnabledRefer to “Supervisorpassword” on page 44.Lock UEFI BIOS Settings •Disabled• EnabledEnable or disable thefunction that protectsitems in ThinkPad Setupfrom being changed by auser who does not havethe supervisor password.By default, this is set toDisabled. If you set thesupervisor password andenable this function, noone but you can changeitems in the ThinkPad Setupprogram.Password at UnattendedBoot• Disabled•EnabledIf you select and enablePassword at unattendedboot, a password promptis displayed when thecomputer is turned on,from either a power-offstate or hibernation state.If you select Disabled,no password prompt isdisplayed; the computergoes ahead and loadsthe operating system.To prevent unauthorizedaccess, set the userauthentication on theoperating system.Password at Restart • Disabled• EnabledIf you select and enablePassword at restart,a password prompt isdisplayed when you restartthe computer. If you selectDisabled, no passwordprompt is displayed; thecomputer goes ahead andPassword60 User Guide
Table 5. Security menu items (continued)Menu item Submenu item Selection Commentsloads the operating system.To prevent unauthorizedaccess, set the userauthentication on theoperating system.Password at Boot DeviceList•Disabled• EnabledIf the Security passwordis set, this option is usedto specify whether theSecurity password mustbe entered to display theF12 boot device list. SelectEnabled to prompt forthe Security password.Select Disabled to proceedwithout any user actionrequired.Password Count ExceededError• Disabled•EnabledSelect Enabled to showthe POST 0199 error andprompt for the Securitypassword. Select Disabledto hide the POST 0199 errorand proceed without anyuser action required.Set Minimum Length •Disabled• Password length optionsSpecify a minimum lengthfor the power-on passwordand hard disk password.By default, this is set toDisabled. If you set thesupervisor password andspecify a minimum lengthfor passwords, no one butyou can change the length.Power-On Password •Disabled• EnabledRefer to “Power-onpassword” on page 43.Hard Disk1 Password • Disabled• EnabledRefer to “Hard diskpasswords” on page46.Flash BIOS Updating byEnd-Users• Disabled•EnabledIf you select Enabled,all users can update theUEFI BIOS. If you selectDisabled, only the personwho knows the supervisorpassword can update theUEFI BIOS.UEFI BIOS Update OptionSecure RollBack Prevention • Disabled• EnabledDisabled is the defaultvalue when OS Optimisezdis set toDisabled.Enabledis the default value whenOS Optimisezd is settoEnabled.If you select Disabled, youcan flash the older versionUEFI BIOS.Chapter 5.Advanced configuration 61
Table 5. Security menu items (continued)Menu item Submenu item Selection CommentsMemory Protection Execution Prevention • Disabled•EnabledSome computer virusesand worms cause memorybuffers to overflow byrunning code where onlydata is allowed. If theData Execution Preventionfeature can be used withyour operating system, thenby selecting Enabled youcan protect your computeragainst attacks by suchviruses and worms. If afterchoosing Enabled you findthat a program does not runcorrectly, select Disabledand reset the setting.Intel VirtualizationTechnology•Disabled• EnabledIf you select Enabled, aVirtual Machine Monitor(VMM) can utilize theadditional hardwarecapabilities provided byVirtualization Technology.Note: This sub-menu isavailable on models with anIntel CPU.Intel VT-d Feature • Disabled• EnabledIntel VT-d is IntelVirtualization Technologyfor Directed I/O. Whenenabled, a VMM can utilizethe platform infrastructurefor I/O virtualization.Note: This sub-menu isavailable on models with anIntel CPU.VirtualizationAMD-V™Technology •Disabled• EnabledIf you select Disable,a VMM can utilize theadditional hardwarecapabilities providedby AMD Virtualizationtechnology.Note: This sub-menu isavailable on models with anAMD CPU.62 User Guide
Table 5. Security menu items (continued)Menu item Submenu item Selection CommentsEthernet LAN • Disabled•EnabledIf you select Enabled, youcan use the Ethernet LANdevice.Wireless LAN • Disabled•EnabledIf you select Enabled,you can use wireless LANdevices.Bluetooth • Disabled•EnabledIf you select Enabled, youcan use Bluetooth devices.USB Port • Disabled•EnabledIf you select Enabled, youcan use USB connectors.Memory Card Slot • Disabled•EnabledIf you select Enabled, youcan use the memory cardslots.Integrated Camera • Disabled•EnabledIf you select Enabled, youcan use the integratedcamera.I/O Port AccessMicrophone • Disabled•EnabledIf you select Enabled, youcan use the microphones(internal, external, orline-in).Anti-Theft Computrace ModuleActivation• Disabled•Enabled• Permanently DisabledEnable or disable the UEFIBIOS interface to activatethe computrace module.Computrace is an optionalmonitoring service fromAbsolute Software.Note: If you set theComputrace moduleactivation to PermanentlyDisabled, you will beunable to enable thissetting again.Secure Boot • Disabled• EnabledDisabled is the defaultvalue when OS Optimisezdis set toDisabled.Enabledis the default value whenOS Optimisezd is settoEnabled.Enable or disable theUEFI Secure Boot feature.Select Enable to preventunauthorized operatingsystems from running atboot time. Select Disabledto allow any operatingsystems to run at boot time.Note: To enable SecureBoot, you need to set thestartup setting as UEFISecure BootChapter 5.Advanced configuration 63
Table 5. Security menu items (continued)Menu item Submenu item Selection CommentsOnly and set CSM Supportas No.Platform Mode • Setup Mode•User ModeSpecify the systemoperating mode.Secure Boot Mode • Standard Mode• Custom ModeSpecify the systemoperating mode.Reset to Setup Mode • Yes• NoThis option is used to clearthe current platform keyand put the system intoSetup Mode. You caninstall your own platformkey and customize theSecure Boot signaturedatabases in Setup Mode.Secure Boot mode will beset to Custom Mode.Restore Factory keys • Yes• NoThis option is used torestore all keys andcertificates in SecureBoot databases to factorydefaults. Any customizedSecure Boot settingswill be erased, and thedefault platform key will bere-established along withthe original signaturedatabases includingcertificate for Windows8.1 operating system.Clear All Secure Boot Keys • Yes• NoThis option is used to clearall keys and certificates inSecure Boot databases.You can install your ownkeys and certificates afterselecting this option.Startup menuTo change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu.Attention:• After you change the startup sequence, ensure that you select a correct device during a copy, a save, or aformat operation. Otherwise your data might be erased or overwritten.• If you are using the BitLocker™drive encryption, do not change the startup sequence. BitLocker driveencryption locks the computer from starting once detects the change of startup sequence.To change the startup sequence temporarily so that the computer starts from a desired drive, do the following:1. Turn off the computer.2. Turn on the computer. When the ThinkPad logo is displayed, press the F12 key.3. Select the device that you want the computer to start from.64 User Guide
Note: The Boot menu will be displayed if the computer cannot start from any devices or the operatingsystem cannot be found.The following table lists the Startup menu items. Default values are in boldface.Note: Some items are displayed on the menu only if the computer supports the corresponding features.Table 6. Startup menu itemsMenu item Selection CommentsBoot Select the boot device when youpress the power button to turn on thecomputer.Network Boot Select the boot device when thecomputer wakes from LAN. If WakeOn LAN is enabled, a networkadministrator can turn on all of thecomputers in a LAN remotely by useof network management software.UEFI/Legacy Boot •Both• UEFI Only• Legacy OnlyUEFI/Legacy Boot Priority• UEFI First•Legacy FirstCSM Support (for UEFI Only)• No•YesSelect system boot capability.•Both: Select priority of bootoptions between UEFI and Legacy.•UEFI Only: The computer will startfrom the UEFI-enabled operatingsystem.•Legacy Only: The computer willboot from any operating systemother than the UEFI-enabled one.Note: If you select UEFI Only, thecomputer cannot start from thebootable devices that do not have theUEFI-enabled operating system.Compatibility Support Module (CSM)is required for starting the legacyoperating system. If you select UEFIOnly,CSM Support is selectable.For Both or Legacy Only mode, CSMSupport is not selectable.Boot Mode •Quick• DiagnosticsScreen during the POST:•Quick: The ThinkPad Logo screenis displayed.•Diagnostics: Test messages aredisplayed.Note: You can also enter Diagnosticmode by pressing Esc during POST.Option Key Display • Disabled•EnabledIf you select Disabled, then themessage “To interrupt normal startup,press Enter” is not displayed duringthe POST.Chapter 5.Advanced configuration 65
Table 6. Startup menu items (continued)Menu item Selection CommentsBoot Device List F12 Option • Disabled•EnabledIf you select Enabled, the F12 keyis recognized and the Boot Menuwindow is displayed.Boot Order Lock •Disabled• EnabledIf you select Disabled, your computerwill boot using the default priority. Ifyou select Enabled, your computerwill boot using the priority you havecustomized.Restart menuTo exit the ThinkPad Setup program and restart the computer, select Restart from the ThinkPad Setup menu.The following submenu items are displayed:•Exit Saving Changes: Save the changes and restart the computer.•Exit Discarding Changes: Discard the changes and restart the computer.•Load Setup Defaults: Restore to the factory default settings.Note: Enable OS Optimized Defaults to meet the Windows 8.1 certification requirements. When youchange this setting, some other settings are changed automatically, such as CSM Support,UEFI/LegacyBoot,Secure Boot, and Secure RollBack Prevention.•Discard Changes: Discard the changes.•Save Changes: Save the changes.Updating your system UEFI BIOSThe UEFI BIOS is the first program that the computer runs when the computer is turned on. The UEFI BIOSinitializes the hardware components, and loads the operating system and other programs.You can update the UEFI BIOS by starting your computer from a flash update optical disc or a flash updateprogram running in the Windows environment. When you install a new program, a device driver, or hardware,you might be informed to update the UEFI BIOS.For instructions on how to update the UEFI BIOS, go to:http://www.lenovo.com/ThinkPadDrivers66 User Guide
Chapter 6. Preventing problemsAn important part of owning a ThinkPad notebook computer is maintenance. With proper care, you canavoid common problems. The chapter provides information that can help you keep your computer runningsmoothly.• “General tips for preventing problems” on page 67• “Making sure device drivers are current” on page 68• “Taking care of your computer” on page 69General tips for preventing problems• Check the capacity of your , hybrid drive, or solid-state drive from time to time. If the , hybrid drive, orsolid-state drive gets too full, the Windows operating system will slow down and might produce errors.To check the capacity of the hard disk drive, hybrid drive, or solid-state drive, do the following:– For Windows 7: Click Start ➙Computer.– For Windows 8.1: Open the File Explorer.• Empty your recycle bin on a regular basis.• Use disk defragment tool regularly on your hard disk drive, hybrid drive, or solid-state drive to improvedata seek and read times.• To free up disk space, uninstall unused application programs.Note: You also might want to look for program duplication or overlapping versions.• Clean out your Inbox, Sent, and Trash folders from your e-mail client program.• Back up your data at least once a week. If critical data is present, it is a good idea to perform a dailybackup operation. Lenovo has many backup options available for your computer. Rewritable externaloptical drives are available for most machines and are easily installed.• Schedule system restore operations to take a system snapshot periodically. For more information aboutsystem restore, see Chapter 8 “Recovery overview” on page 91.• Update device drivers and the UEFI BIOS when needed.• Profile your machine at http://www.lenovo.com/support to keep up to date with current drivers andrevisions.• Keep up to date for device drivers on other non-Lenovo hardware. You might want to read the devicedriver information release notes prior to updating for compatibility or known issues.• Keep a log book. Entries might include major hardware or software changes, driver updates, minor issuesyou have experienced, and how you resolved the minor issues.• If you ever need to run a recovery on your computer to return the preinstalled contents onto the machine,the following tips might help along the way:– Remove all external devices such as the printer, keyboard, and so on.– Make sure that your battery is charged and your computer has the ac power connected.– Access ThinkPad Setup and load the default settings.– Restart the computer and start the recovery operation.– If your computer uses discs as the recovery media, do not remove the disc from the drive untilprompted to do so.© Copyright Lenovo 2014 67
• For suspected hard disk drive, hybrid drive, or solid-state drive issues, refer to “Diagnosing problems”on page 73 and run a diagnostic test for the drive before you call the Customer Support Center.If your computer does not start up, download the files to create a bootable self-test medium fromhttp://www.lenovo.com/hddtest. Run the test and record any messages or error codes. If the test returnsany failing error codes or messages, call the Customer Support Center with the codes or messages andthe computer in front of you. A technician will assist you further.• If required, you can find the contact information about the Customer Support Center for your countryor region at http://www.lenovo.com/support/phone. When calling the Customer Support Center, makesure that you have your machine model type, serial number, and the computer in front of you. Also, if thecomputer is producing error codes, it is helpful to have the error screen on or the messages written down.Making sure device drivers are currentDevice drivers are programs that contain instructions for the operating system about how to operate or“drive” a certain piece of hardware. Each hardware component on your computer has its own specific driver.If you add a new component, the operating system needs to be instructed on how to operate that pieceof hardware. After you install the driver, the operating system can recognize the hardware componentand understand how to use it.Note: Because drivers are programs, like any other file on your computer, they are susceptible to corruptionand might not perform correctly if corruption occurs.It is not always necessary to download the latest drivers. However, you should download the latest driverfor a component if you notice poor performance from that component or if you added a new component.This might eliminate the driver as the potential cause of a problem.Getting the latest drivers from the Web siteYou can download and install updated device drivers from the Lenovo Web site by doing the following:1. Go to http://www.lenovo.com/ThinkPadDrivers.2. Select the entry for your computer and then follow the instructions on the screen to download andinstall necessary software.Getting the latest drivers using System UpdateThe System Update program helps you keep the software on your computer up-to-date. Update packagesare stored on Lenovo servers and can be downloaded from the Lenovo Support Web site. Update packagescan contain applications, device drivers, UEFI BIOS flashes, or software updates. When the System Updateprogram connects to the Lenovo Support Web site, the System Update program automatically recognizesthe machine type and model of your computer, the installed operating system, and the language of theoperating system to determine what updates are available for your computer. The System Update programthen displays a list of update packages and categorizes each update as critical, recommended, or optional tohelp you understand the importance. You have complete control of which updates to download and install.After you select the update packages you want, the System Update program automatically downloads andinstalls the updates without any further intervention from you.The System Update program is preinstalled on your computer and is ready to run. The only prerequisite isan active Internet connection. You can start the program manually, or you can use the schedule featureto enable the program to search for updates automatically at specified intervals. You also can predefinescheduled updates to search by severity (critical updates, critical and recommended updates, or all updates)so the list you choose from contains only those update types that are of interest to you.For more information about how to use the System Update program, refer to the help information systemof the program.68 User Guide
Taking care of your computerAlthough your computer is designed to function reliably in normal work environments, you need to usecommon sense in handling it. By following the important tips in this topic, you will get the most use andenjoyment out of your computer.Be careful about where and how you work• Store packing materials safely out of the reach of children to prevent the risk of suffocation from plasticbags.• Keep your computer away from magnets, activated cellular phones, electrical appliances, or speakers(more than 13 cm or 5 inches).• Avoid subjecting your computer to extreme temperatures (below 5°C/41°F or above 35°C/95°F).• Some appliances, such as certain portable desktop fans or air purifiers, can produce negative ions. If acomputer is close to such an appliance, and is exposed for an extended time to air containing negativeions, it might become electrostatically charged. Such a charge might be discharged through your handswhen you touch the keyboard or other parts of the computer, or through connectors on I/O devicesconnected to it. Even though this kind of electrostatic discharge (ESD) is the opposite of a discharge fromyour body or clothing to the computer, it poses the same risk of a computer malfunction.Your computer is designed and manufactured to minimize any effects of electrostatic charge. An electrostaticcharge above a certain limit, however, can increase the risk of ESD. Therefore, when using the computerclose to an appliance that can produce negative ions, give special attention to the following:• Avoid directly exposing your computer to the air from an appliance that can produce negative ions.• Keep your computer and peripherals as far as possible from such an appliance.• Wherever possible, ground your computer to facilitate safe electrostatic discharge.Note: Not all such appliances cause a significant electrostatic charge.Be gentle with your computer• Avoid placing any objects (including paper) between the display and the keyboard or the palm rest.• Your computer display is designed to be opened and used at an angle slightly greater than 90 degrees.Do not open the display beyond 135 degrees, as this might damage the computer hinge.• Do not turn your computer over while the ac power adapter is plugged in. This could break the adapterplug.Carry your computer properly• Before moving your computer, be sure to remove any media, turn off attached devices, and disconnectcords and cables.• When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer bythe display.Handle storage media and drives properly• When installing the hard disk drive, hybrid drive, or solid-state drive, follow the instructions shipped withyour hardware, and apply pressure only where needed on the device.• After you replace the primary hard disk drive, hybrid drive, or solid-state drive, reattach the cover of thedrive slot.• When replacing the hard disk drive, hybrid drive, or solid-state drive reattach the cover of the drive slot.• Store your external and removable hard disk drive, hybrid drive, or solid-state drive in the appropriatecontainers or packaging when they are not being used.Chapter 6.Preventing problems 69
• Before you install any of the following devices, touch a metal table or a grounded metal object. This actionreduces any static electricity from your body. The static electricity could damage the device.Note: Not all listed devices are included in your computer.– Memory module– Mini-PCI card– Memory card, such as an SD card, SDHC card, SDXC card, and a MultiMediaCardThis action reduces any static electricity from your body. The static electricity could damage the device.• When transferring data to or from a flash media card, such as an SD card, do not put your computer insleep or hibernation mode before the data transfer is complete. To do so might cause damage to yourdata.Taking care when setting passwords• Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, andyou might have to replace your system board, hard disk drive, hybrid drive, or solid-state drive.Taking care of the fingerprint readerThe following actions could damage the fingerprint reader or cause it not to work properly:• Scratching the surface of the fingerprint reader with a hard, pointed object.• Scraping the surface of the fingerprint reader with your fingernail or anything hard.• Using or touching the fingerprint reader with a dirty finger.If you notice any of the following conditions, gently clean the surface of the fingerprint reader with a dry,soft, lint-free cloth:• The surface of the fingerprint reader is dirty or stained.• The surface of the fingerprint reader is wet.• The fingerprint reader often fails to enroll or authenticate your fingerprint.Registering your computer• Register your ThinkPad computer with Lenovo at http://www.lenovo.com/register. For more information,see “Registering your computer” on page 17.Be sure not to modify your computer• Only an authorized ThinkPad repair technician should disassemble and repair your computer.• Do not modify or tape the latches to keep the display open or closed.Cleaning the cover of your computerOccasionally clean your computer by doing the following:1. Prepare a mixture of a gentle kitchen-use detergent. The detergent must not contain abrasive powder orstrong chemicals such as acid or alkaline. Use five parts water to one part detergent.2. Absorb the diluted detergent into a sponge.3. Squeeze excess liquid from the sponge.4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.5. Wipe the surface to remove the detergent.6. Rinse the sponge with clean running water.7. Wipe the cover with the clean sponge.70 User Guide
8. Wipe the surface again with a dry, soft, lint-free cloth.9. Wait for the surface to dry completely and remove any fibers from the cloth.Cleaning your computer keyboardTo clean the computer keyboard, do the following:1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth.Note: Avoid spraying cleaner directly onto the keyboard.2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time,the cloth might hook onto an adjacent key and possibly damage it. Make sure that no liquid drips ontoor between the keys.3. Allow to dry.4. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brushor cool air from a hair dryer.Cleaning your computer displayTo clean the computer display, do the following:1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, itmight be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover waspressed from the outside.2. Wipe or dust the stain gently with a soft, dry cloth.3. If the stain remains, moisten a soft, lint-free cloth with water or a 50-50 mixture of isopropyl alcohol andwater that does not contain impurities.Note: Avoid spraying cleaner directly onto the keyboard.4. Wring out as much of the liquid as you can.5. Wipe the display again; do not let any liquid drip into the computer.6. Be sure to dry the display before closing it.Chapter 6.Preventing problems 71
72 User Guide
Chapter 7. Troubleshooting computer problemsThis chapter provides information on what to do if you experience a problem with your computer.• “Diagnosing problems” on page 73• “Troubleshooting” on page 73Diagnosing problemsIf you experience problems with your computer, use the Lenovo Solution Center program as a startingpoint for solving them.The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. Itcombines diagnostic tests, system information collection, security status, and support information, alongwith hints and tips for optimal system performance.Notes:• The Lenovo Solution Center program also is available for downloaded at:http://www.lenovo.com/diags• If you are using other Windows operating system rather than Windows 7 or Windows 8.1, you can find thelatest information about diagnostics for your computer at:http://www.lenovo.com/diagnoseIf your computer is installed with the Windows 7 operating system, when you are setting up your computer,the Lenovo Solution Center program prompts you to create recovery media. You can use the recoverymedia to restore the hard disk drive, hybrid drive, or solid-state drive to the factory default state. For moreinformation, see “Creating and using a recovery media” on page 91.To run the Lenovo Solution Center program, see “Accessing Lenovo programs on the Windows 7 operatingsystem” on page .For additional information, refer to the Lenovo Solution Center help system.Note: If you are unable to isolate and repair the problem yourself after running Lenovo Solution Centerprogram, save and print the log files created by the program. You will need the log files when you speak to aLenovo technical support representative.TroubleshootingIf your computer has an error, it typically displays a message or an error code, or makes a beep whenyou turn it on. When you experience a problem, refer to the corresponding sections in this topic to try tosolve the problem by yourself.Computer stops respondingPrint these instructions now and keep it with your computer for reference later.If your computer is completely unresponsive (you cannot use the ThinkPad pointing device or the keyboard),do the following:1. Press and hold the power button until the computer turns off. After the computer is turned off, restart bypressing the power button. If the computer does not turn on, continue with step 2.© Copyright Lenovo 2014 73
Note: Do not remove the battery and the ac power adapter to reset the computer.2. While the computer is turned off, remove all power sources from the computer (battery and the ac poweradapter). Hold down the power button for 10 seconds. Plug in the ac power adapter while keeping thebattery out of the computer. If the computer does not turn back on, continue with step 3.Note: Once the computer starts up and enters the Windows environment, use the proper shutdownprocedure to turn the computer off. Once the computer is off, reattach the battery and restart thecomputer. If the computer does not start with the battery reattached, remove the battery and againstart with step 2. If the computer starts with ac power but does not start when the battery is attached,call the Customer Support Center for support.3. While the computer is off, remove all sources of power (battery and the ac power adapter). Remove allexternal devices that are attached to your computer (keyboard, mouse, printer, scanner, and so on).Repeat step 2. If step 2 is unsuccessful, continue with step 4.Note: The following steps involve removing static sensitive components from your computer. Make surethat you are properly grounded and remove all sources of power attached to the computer. If you areuncomfortable or unsure about removing components, call the Customer Support Center for assistance.4. While the computer is off, remove all sources of power and external hardware. Remove any non-originalmemory module added to your computer. After removing the extra memory module and reinstalling theoriginal memory module, repeat step 2. If the computer still does not turn on, consult the user manualfor other customer-replaceable components that are attached to your computer.If the computer still does not start up, call the Customer Support Center and a Customer Support Specialistwill assist you.Spills on the keyboardWith a mobile computer, there are increased chances of spilling liquids on the keyboard. Because mostliquids conduct electricity, liquid spilled on the keyboard could create numerous short circuits, potentiallycausing irreparable damage to your computer.If you spill something on your computer:Attention: Be sure that no liquid creates a short circuit between you and the ac power adapter (if in use).Although you might lose some data or work by turning off the computer immediately, leaving the computeron might make your computer unusable.1. Carefully unplug the ac power adapter immediately.2. Turn off the computer immediately. If the computer does not turn off, remove the battery. The morequickly you stop the current from passing through the computer the more likely you will reduce damagefrom short circuits.3. Wait until you are certain that all the liquid is dry before turning on your computer.Note: If you want to replace your keyboard, you can purchase a new one.Error messages•Message: 0177: Bad SVP data, stop POST task.Solution: Checksum of the supervisor password in the EEPROM is not correct. The system boardshould be replaced. Have the computer serviced.•Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup.74 User Guide
Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setupto check security settings, Press F10 and then press Enter to restart the system. If you still have aproblem, have the computer serviced.•Message: 0187: EAIA data access error.Solution: The access to EEPROM is failed. Have the computer serviced.•Message: 0188: Invalid RFID Serialization Information Area.Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced,and the box serial number needs to be reinstalled. Have the computer serviced.•Message: 0189: Invalid RFID configuration information area.Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced,and the UUID needs to be reinstalled. Have the computer serviced.•Message: 0190: Critical low-battery error.Solution: The computer turns off, because the battery is low. Connect the ac power adapter to thecomputer and charge the battery, or replace the battery with a fully charged one.•Message: 0191: System Security - Invalid remote change requested.Solution: The system configuration change has failed. Confirm the operation and try again. To clear theerror, enter the ThinkPad Setup program.•Message: 0199: System Security - Security password retry count exceeded.Solution: This message is displayed if you enter a wrong supervisor password more than three times.Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Setup program.•Message: 0251: System CMOS checksum bad.Solution: The system CMOS might have been corrupted by a program. The computer uses the defaultsettings. Run ThinkPad Setup to reconfigure the settings. If you still see the same error code, havethe computer serviced.•Message: 0253: EFI Variable Block Data was destroyed.Solution: The system EFI Variable Block Data might have been corrupted. The computer uses thedefault settings. Run ThinkPad Setup to reconfigure the settings. If you still see the same error code,have the computer serviced.•Message: 0271: Real time clock error.Solution: Have the computer serviced.•Message: 1802: Unauthorized network card is plugged in.Solution: The network card is not supported on this computer. Remove it.•Message: 1820: More than one external fingerprint readers are attached.Solution: Power off and remove all but the reader that you set up within your main operating system.•Message: 2000: ThinkVantage Active Protection sensor diagnostics failed.Solution: ThinkVantage Active Protection sensor is not working correctly. Have the computer serviced.•Message: 2100: Detection error on HDD0 (Main HDD).Chapter 7.Troubleshooting computer problems 75
Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid driveserviced.•Message: 2101: Detection error on HDD1 (Ultrabay HDD)).Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid driveserviced.•Message: 2102: Detection error on HDD2 (Mini SATA).Solution: The Mini SATA device is not working. Have the Mini SATA device serviced.•Message: 2110: Read error on HDD0 (Main HDD).Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid driveserviced.•Message: 2111: Read error on HDD1 (Ultrabay HDD)Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid driveserviced.•Message: 2112: Read error on HDD2 (Mini SATA)Solution: The Mini SATA device is not working. Have the Mini SATA device serviced.•Message: 2200: Machine Type and Serial Number are invalid.Solution: Machine Type and Serial Number are invalid. Have the computer serviced.•Message: 2201: Machine UUID is invalid.Solution: Machine UUID is invalid. Have the computer serviced.•Message: Fan errorSolution: Cooling fan has failed. Shut down the computer immediately and have the computer serviced.•Message: Thermal sensing errorSolution: The thermal sensor is not functioning correctly. Shut down the computer immediately andhave the computer serviced.•Message: This system does not support batteries that are not genuine Lenovo-made or authorized. Thesystem will continue to boot, but may not charge unauthorized batteries. Press the ESC key to continue.Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, andprovides no warranties for failures or damage arising out of their use.Solution: Replace the battery with the correct Lenovo battery for this computer. If you still see the sameerror message, contact Lenovo service to have the computer serviced.•Message: The battery installed is not supported by this system and will not charge. Please replace thebattery with the correct Lenovo battery for this system. Press the ESC key to continue.Solution: Replace the battery with the correct Lenovo battery for this computer. If you still see the sameerror message, contact Lenovo service to have the computer serviced.Errors without messages•Problem: My screen keeps blanking when I do not want it to.Solution: If you computer is preinstalled with the Windows 7 operating system, you can disable anysystem timers, such as the LCD turn-off timer or the blank timer by doing the following:76 User Guide
1. Start Power Manager.2. Click the Power plan tab, and then select Maximum Performance from the predefined power plans.•Problem: When I turn on the computer, nothing is displayed on the screen and the computer does notbeep while starting up.Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding thepower button for four seconds or more. Then turn on the computer and listen again.Solution: Make sure that:– The battery is installed correctly.– The ac power adapter is connected to the computer and the power cord is plugged into a workingelectrical outlet.– The computer is turned on. (Press the power button again for confirmation.)– The brightness level of the screen is appropriately set.If a power-on password is set, press any key to display the prompt for the power-on password andthen type the correct password and press Enter.If these items are correctly set, and the screen remains blank, have the computer serviced.•Problem: When I turn on the computer, only a white cursor is displayed on a blank screen.Solution: If you have modified a partition on your hard disk drive, hybrid drive, or solid-state drive by usingpartition software, information about that partition, or the master boot record might have been destroyed.1. Turn off the computer, and then turn it on again.2. If you still see only the cursor on the screen, do the following:– If you have used the partition software, examine the partition on the hard disk drive, hybrid drive,or solid-state drive by using the software, and recover the partition if required.– Use the recovery solutions to restore the system to the factory default state.If the problem persists, have the computer serviced.•Problem: My screen goes blank while the computer is on.Solution: Your screen saver or power management might have been enabled. Do either of the following:– Touch the TrackPoint pointing device or the ThinkPad trackpad, or press a key to exit the screen saver.– Press the power button to resume the computer from sleep or hibernation mode.Beep errorsTable 7. Beep errorsProblem SolutionOne short beep, pause, three short beeps, pause, threemore short beeps, and one short beepMake sure that memory modules are installed correctly. Ifthey are, and you still hear the beeps, have the computerserviced.Three short beeps, pause, one short beep, pause, onemore short beep, and three short beepsPCI resource allocation failure. Power off the computerand remove the device from the ExpressCard Slot. If thebeeps persist, have the computer serviced.Five short beeps, pause, Five short beeps, pause The Security Chip has a problem. Have the computerserviced.Four cycles of four short beeps The Security Chip has a problem. Have the computerserviced.Chapter 7.Troubleshooting computer problems 77
Table 7. Beep errors (continued)One long and two short beeps The video function has a problem. Have the computerserviced.Five short beeps The system board has a problem. Have the computerserviced.Memory module problemsPrint these instructions now and keep it with your computer for reference later.If your memory module is not operating properly, check the following items:1. Verify that the memory module is installed and seated correctly in your computer.It might be necessary to remove all added memory modules to test the computer with only thefactory-installed memory modules, and then reinstall the memory module one at a time to ensurea proper connection.2. Check for error messages during startup.Follow the appropriate corrective actions for power-on self-test (POST) error messages.3. Verify that the latest UEFI BIOS for your model has been installed.4. Verify the proper memory configuration and compatibility including the maximum memory size and thememory speed.5. Run diagnostic programs. See “Diagnosing problems” on page 73.Networking problemsThe following are the most common networking problems:Ethernet problems•Problem: Your computer cannot connect to the network.Solution: Make sure that:– The cable is installed correctly.The network cable must be securely connected both to the Ethernet connector of your computer andto the RJ45 connector of the hub. The maximum allowable distance from the computer to hub is100 meters. If the cable is connected and the distance is within acceptable limits but the problempersists, try a different cable.– You are using the correct device driver. To install the correct driver, do the following:1. Go to Control Panel and click Hardware and Sound ➙Device Manager. If you are prompted foran administrator password or confirmation, type the password or provide confirmation.2. If the exclamation mark !is displayed next to the adapter name under Network adapters, youmight not be using the correct driver or the driver might have been disabled. To update the driver,right-click the highlighted adapter.3. Click Update Driver Software, and then follow the instructions on the screen.– The switch port and the adapter have the same duplex setting.If you configured the adapter for full duplex, make sure that the switch port also is configured for fullduplex. Setting wrong duplex mode can degrade performance, cause data loss, or result in lostconnections.– You have installed all networking software that is necessary for your network environment.Check with your LAN administrator for the necessary networking software.78 User Guide
•Problem: The adapter stops working for no apparent reason.Solution: The network driver files might be corrupt or missing. Update the driver by referring to the abovesolution for the procedure to make sure that the correct device driver is installed.•Problem: If your computer is a Gigabit Ethernet model and you use a speed of 1000 Mbps, theconnection fails or errors occur.Solution:– Use Category 5 wiring and make sure that the network cable is securely connected.– Connect to a 1000 BASE-T hub/switch (not 1000 BASE-X).•Problem: The Wake on LAN feature is not working.Solution:– Make sure that Wake on LAN is enabled in ThinkPad Setup.– If it is, check with your LAN administrator for the necessary settings.•Problem: If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps.Instead, it connects at 100 Mbps.Solution:– Try another cable.– Make sure that the link partner is set to auto-negotiate.– Make sure that the switch is 802.3ab-compliant (gigabit over copper).A wireless LAN problemProblem: I cannot connect to the network using the built-in wireless network card.Solution: Make sure that:• Your wireless LAN driver is the latest version.• Your computer is within range of a wireless access point.• The wireless radio is enabled.Note: If you are using the Windows 7 operating system, click Show hidden icons on the Windowsnotification area. The Access Connections icon is displayed. For more information about the icon, refer tothe Access Connections help information system.For the Windows 7 operating system, check the Network Name (SSID) and your encryption information. Usethe Access Connections program to verify this case-sensitive information.Bluetooth problemsNote: Check your connection anytime and make sure that no other Bluetooth-enabled device is searching forthe device to which you want to connect. Simultaneous searching is not allowed in the Bluetooth connection.•Problem: Sound does not come from the Bluetooth headset/headphone but comes from the localspeaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile.Solution: Do the following:1. Exit the application that uses the sound device (for example, Windows Media Player).2. Go to Control Panel and click Hardware and Sound ➙Sound ➙Playback.3. If you are using a Headset profile, select Bluetooth Hands-free Audio and click the Set Defaultbutton. If you are using an AV profile, select Stereo Audio and click the Set Default button.Chapter 7.Troubleshooting computer problems 79
4. Click OK to close the Sound window.•Problem: PIM items sent from the Windows 7 operating systems cannot be received correctly into theaddress book of any other Bluetooth-enabled device.Solution: The Windows 7 operating system sends PIM items in XML format, but most Bluetooth-enableddevices handle PIM items in vCard format. If another Bluetooth-enabled device can receive a file throughBluetooth, a PIM item sent from the Windows 7 might be saved as a file with the extension .contact.Problems with the keyboard and other pointing devicesThe following are the most common problems with keyboards and other pointing devices.ThinkPad pointing device problems•Problem: The pointer drifts when the computer is turned on or after it resumes normal operation.Solution: The pointer might drift when you are not using the TrackPoint pointing device during normaloperation. This is a normal characteristic of the TrackPoint pointing device and is not a defect. Pointerdrifting might occur for several seconds under the following conditions:– When the computer is turned on– When the computer resumes normal operation– When the TrackPoint pointing device is kept pressed for a long time– When the temperature changes•Problem: The TrackPoint pointing device or ThinkPad trackpad does not work.Solution: Make sure that the TrackPoint pointing device or ThinkPad trackpad is enabled in the ThinkPadpointing device setting window.Note: To open the ThinkPad pointing device window, go to Control Panel and click Hardware andSound ➙Mouse, and then click the ThinkPad tab.Keyboard problems•Problem: All or some keys on the keyboard do not work.Solution: If an external numeric keypad is connected:1. Turn off the computer.2. Remove the external numeric keypad.3. Turn on the computer and try using the keyboard again.If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the externalkeyboard. Make sure that you have seated the connectors correctly.If the problem persists, make sure that the correct device driver is installed by doing the following:1. Open Control Panel. Change the view of Control Panel from Category to Large icons or Small icons.2. Click Keyboard.3. Select the Hardware tab. In the Device Properties pane, make sure that you see this message:      If keys on the keyboard still do not work, have the computer serviced.•Problem: A number is displayed when you type a letter.Solution: The numeric lock function is on. To disable it, press Fn+NumLock.•Problem: All or some keys on the external numeric keypad do not work.80 User Guide
Solution: Make sure that the external numeric keypad is correctly connected to the computer.Problems with the display and multimedia devicesThis topic includes the most common problems with displays and multimedia devices, including thecomputer display, the external monitor, and audio devices.Computer screen problems•Problem: The screen is blank.Solution: Do the following:– Press F7 to bring up the image.– If you are using the ac power adapter, or using the battery and the battery gauge shows that the batteryis not depleted, press F6 to make the screen brighter.– If your computer is in sleep mode, press Fn to resume from the sleep mode.– If the problem persists, follow the solution for the following problem.•Problem: The screen is unreadable or distorted.Solution: Make sure that:– The display device driver is installed correctly.– The screen resolution and color quality are correctly set.– The monitor type is correct.To check these settings, do the following:1. Connect the external monitor to your computer, and then connect the monitor to an electrical outlet.2. Turn on the external monitor.3. Right-click on the desktop, and click Screen resolution.Note: If your computer cannot detect the external monitor, click the Detect button.4. Select the external monitor and set Resolution.5. Click Advanced Settings.6. Click the Monitor tab. Check the monitor information to make sure that the monitor type is correct.If the monitor type is correct, click OK to close the window; otherwise proceed with the following steps.1. If more than two monitor types are displayed, select Generic PnP Monitor or Generic Non-PnPMonitor.2. Click Properties. If you are prompted for an administrator password or confirmation, type the passwordor provide confirmation.3. Click the Driver tab.4. Click Update Driver.5. Click Browse my computer for driver software, and then click Let me pick from a list of devicedrivers on my computer.6. Clear the Show compatible hardware check box.7. Select the correct manufacturer and model for the external monitor. If you cannot find your monitor onthe list, stop the installation of this driver and use the driver shipped with your monitor.8. After updating the driver, click Close.9. For the Windows 7 operating system, to change the color settings, right-click on the desktop, and clickScreen resolution. Click Advanced Settings, select the Monitor tab, then set Colors.Chapter 7.Troubleshooting computer problems 81
10. Click OK.•Problem: Incorrect characters are displayed on the screen.Solution: Did you install the operating system or program correctly? If they are installed and configuredcorrectly, have the computer serviced.•Problem: The screen stays on even after you turn off your computer.Solution: Press and hold the power button for four seconds or more to turn off your computer; thenturn it on again.•Problem: Missing, discolored, or bright dots appear on the screen every time you turn on your computer.Solution: This is an intrinsic characteristic of the TFT technology. Your computer display containsmultiple thin-film transistors (TFTs). A small number of missing, discolored, or bright dots on the screenmight exist all the time.External monitor problems•Problem: The external monitor is blank.Solution: To bring up the image, press F7 and select the desired monitor. If the problem persists, dothe following:1. Connect the external monitor to another computer to make sure that it works.2. Reconnect the external monitor to your computer.3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates thatare supported.– If the external monitor supports the same resolution as the computer display or a higher resolution,view output on the external monitor or on both the external monitor and the computer display.– If the external monitor supports a lower resolution than the computer display, view output on theexternal monitor only. (If you view output on both the computer display and the external monitor,the external monitor screen will be blank or distorted.)•Problem: You cannot set a higher resolution than the present one on your external monitor.Solution: Make sure that the monitor information is correct. Do the following:1. Right-click on the desktop, and click Screen resolution.Note: If your computer cannot detect the external monitor, click the Detect button.2. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).3. Click Advanced Settings.4. Click the Adapter tab.5. Make sure that the correct device driver name is shown in the adapter information window.Note: The device driver name depends on the video chip that has been installed on your computer.6. Click OK.If the information is incorrect, reinstall the device driver.– Check the monitor type and, if necessary, update the driver by doing the following:1. Connect the external monitor to the monitor connector, and then connect the monitor to anelectrical outlet.2. Turn on the external monitor and the computer.3. Right-click on the desktop, and click Screen resolution.82 User Guide
Note: If your computer cannot detect the external monitor, click the Detect button.4. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).5. Click Advanced Settings.6. Click the Monitor tab. Check the monitor information window to make sure that the monitor typeis correct. If it is, click OK to close the window; otherwise do the following.7. If more than one monitor type is displayed, select Generic PnP Monitor or Generic Non-PnPMonitor.8. Click Properties. If you are prompted for an administrator password or confirmation, type thepassword or provide confirmation.9. Click the Driver tab.10. Click Update Driver.11. Click Browse my computer for driver software, and then click Let me pick from a list ofdevice drivers on my computer.12. Clear the Show compatible hardware check box.13. Select your monitor manufacturer and model.14. After updating the driver, click Close.15. Set Resolution.Note: To change the color settings, select the Monitor tab, then set Colors.16. Click OK.•Problem: The screen is unreadable or distorted.Solution: Make sure that:– The monitor information is correct and the appropriate monitor type is selected. Refer to the solutionto the above problem.– Make sure that an appropriate refresh rate is selected by doing the following:1. Connect the external monitor to the monitor connector, and then connect the monitor to anelectrical outlet.2. Turn on the external monitor and the computer.3. Right-click on the desktop, and click Screen resolution.Note: If your computer cannot detect the external monitor, click the Detect button.4. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).5. Click Advanced Settings.6. Click the Monitor tab.7. Select the correct screen refresh rate.•Problem: Wrong characters are displayed on the screen.Solution: Did you follow the correct procedure when installing the operating system or program? If youdid, have the external monitor serviced.•Problem: The Extend desktop function does not work.Solution: Enable the Extend desktop function by doing the following:1. Connect the external monitor to the monitor connector, and then connect the monitor to an electricaloutlet.2. Turn on the external monitor and the computer.Chapter 7.Troubleshooting computer problems 83
3. Right-click on the desktop, and click Screen resolution.4. Click the Monitor-2 icon.5. Select Extend these displays for multiple displays.6. Click the Monitor-1 icon (for the primary display, the computer display).7. Set the resolution for the primary display.8. Click the Monitor-2 icon (for the external monitor).9. Set the screen resolution for the secondary display.10. Set the relative position of each monitor by dragging its icon. You can set the monitors in any relativeposition, but the icons must touch each other.11. Click OK to apply the changes.Note: To change the color settings, right-click on the desktop, and click Screen resolution. ClickAdvanced Settings, select the Monitor tab, then set Colors.•Problem: If you use the Extend desktop function, you cannot set a higher resolution or higher refreshrate on the secondary display.Solution: Change the resolution and the color depth to lower settings for the primary display. Referto the solution to the above problem.•Problem: Display switching does not work.Solution: If you use the Extend desktop function, disable it, and change the display output location. Ifa DVD movie or a video clip is playing, stop the playback, close the program, and then change thedisplay output location.•Problem: The screen position on the external monitor is incorrect when that monitor is set for a highresolution.Solution: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left orright on the screen. To correct this, first make sure that your external monitor supports the display mode(the resolution and the refresh rate) that you have set. If it does not, set a display mode that the monitorsupports. If it does support the display mode you have set, go to the setup menu for the monitor itselfand adjust the settings there. Usually the external monitor has buttons for access to the setup menu. Fordetails, see the documentation that comes with the monitor.Audio problems•Problem: Wave or MIDI sound does not play correctly.Solution: Make sure that the built-in audio device is configured correctly.1. Open Control Panel.2. Click Hardware and Sound.3. Click Device Manager. If you are prompted for an administrator password or confirmation, type thepassword or provide confirmation.4. Double-click Sound, video and game controllers.5. Make sure that the following device is enabled and configured correctly:– Conexant CX20672 SmartAudio HD•Problem: Recordings made using the microphone input are not loud enough.Solution: Make sure that the Microphone Boost function is turned on and set by doing the following:1. Open Control Panel.84 User Guide
2. Click Hardware and Sound.3. Click Sound.4. Click the Recording tab in the Sound window.5. Select Microphone, and click the Properties button.6. Click the Levels tab, and move the Microphone Boost slider upwards.7. Click OK.Note: For details about controlling volume, refer to your Windows online help.•Problem: A volume or balance slider cannot be moved.Solution: The slider might be grayed out. This means that its position is fixed by the hardware andcannot be changed.•Problem: The volume sliders do not stay in place when some audio programs are used.Solution: It is normal for the sliders to change position when certain sound applications are used. Theapplications are aware of the settings in the Volume Mixer window and are allowed to change the settingsthemselves. An example is the Windows Media Player. Usually the program has sliders available tocontrol the sound from within the program.•Problem: The balance slider cannot completely mute one channel.Solution: The control is designed to compensate for minor differences in balance and does notcompletely mute either channel.•Problem: There is no volume control for MIDI sound in the Volume Mixer window.Solution: Use the hardware volume control. This is because the built-in synthesizer software doesnot support the control.•Problem: The sound cannot be turned off even if you set the Master volume control at minimum.Solution: You still can hear some sound even though you have set the Master volume control at minimum.To turn off the sound completely, go to the Master volume control and select Mute speakers.•Problem: When you connect a headphone to your computer while playing sound, a speaker does notproduce sound.Solution: Once the headphone is attached, the streaming is automatically redirected to it. If you wantto listen to sound from the speakers again, be sure to set those speakers as the default device. Theprocedure is as follows:1. Open Control Panel.2. Click All Control Panel Items.3. Click the SmartAudio icon. The SmartAudio window opens.4. Look at the playback devices. If you have attached a headphone, the headphone will be automaticallyset as the default device, and the icon for that headphone will be checked.5. To set a different device as the default, double-click the icon for those speakers. That icon willnow have a check mark.6. Play any sound by use of a music program such as Windows Media Player. Make sure that soundcomes from the speakers.For details, refer to the help information system for SmartAudio.Chapter 7.Troubleshooting computer problems 85
Fingerprint reader problems•Problem: The surface of the reader is dirty, stained, or wet.Solution: Gently clean the surface of the reader with a dry, soft, lint-free cloth.•Problem: The reader often fails to enroll or authenticate your fingerprint.Solution: If the surface of the reader is dirty, stained, or wet, gently clean the surface of the readerwith a dry, soft, lint-free cloth.For tips on how to maintain the fingerprint reader, refer to Maintaining the fingerprint reader.Battery and power problemsThis topic contains instructions on troubleshooting battery and power problems.Battery problems•Problem: The battery cannot be fully charged in the standard charge time when the computer is poweredoff.Solution: The battery might be over-discharged. Do the following:1. Turn off the computer.2. Make sure that the over-discharged battery is in the computer.3. Connect the ac power adapter to the computer and let it charge.If a quick charger is available, use it to charge the over-discharged battery.If the battery cannot be fully charged in 24 hours, use a new battery.•Problem: Your computer shuts down before the battery status icon in the Windows notification areashows empty, or your computer operates after the battery status icon in the Windows notification areashows empty.Solution: Discharge and recharge the battery.•Problem: The operating time for a fully charged battery is short.Solution: Discharge and recharge the battery. If your battery operating time is still short, use a new battery.•Problem: The computer does not operate with a fully charged battery.Solution: The surge protector in the battery might be active. Turn off the computer for one minute to resetthe protector; then turn on the computer again.•Problem: The battery cannot be charged.Solution: You cannot charge the battery when it is too hot. If the battery feels hot, remove it from thecomputer and allow it to cool to room temperature. After it cools, reinstall it and recharge the battery. If itstill cannot be charged, have it serviced.An ac power adapter problemProblem: The ac power adapter is connected to the computer and the working electrical outlet, but thepower adapter (power plug) icon is not displayed in the Windows notification area.Solution: Do the following:1. Make sure that the connection of the ac power adapter is correct. For instructions on connecting the acpower adapter, see Safety, Warranty, and Setup Guide that comes with your computer.86 User Guide
2. If the connection of the ac power adapter is correct, turn off the computer, then disconnect the ac poweradapter and remove the main battery.3. Reinstall the battery and reconnect the ac power adapter, then turn on the computer.4. If the power adapter icon still is not displayed in the Windows notification area and the system statusindicator does not blink three times when an ac power source is connected, have the ac power adapterand your computer serviced.Note: If you are using the Windows 7 operating system, to display the power adapter (power plug) icon, clickShow hidden icons in the Windows notification area.Power problemsPrint these instructions now and keep it with your computer for reference later.If your computer is getting no power at all, check the following items:1. Verify the power button. The power button is lit whenever the computer is on.2. Check all power connections. Remove any power strips and surge protectors to connect the ac poweradapter directly to the ac power outlet.3. Inspect the ac power adapter. Check for any physical damage, and make sure that the power cable isfirmly attached to the adapter brick and the computer.4. Verify the ac power source is working by attaching another device to the outlet.5. Remove all devices and then test for system power with minimal devices attached.a. Disconnect the ac power adapter and all cables from the computer.b. Close the computer display and turn the computer over.c. Remove the bottom cover and disconnect the battery cable. Refer to “Replacing the hard disk drive,hybrid drive, or solid-state drive” on page 102.d. Remove the memory module. Refer to “Replacing the memory module” on page 106.e. Remove the Wireless LAN card. Refer to “Replacing a wireless LAN card” on page 109.f. Remove the hard disk drive, hybrid drive, or solid-state drive. Refer to “Replacing the hard disk drive,hybrid drive, or solid-state drive” on page 102.g. Wait for 30 seconds, and then reinstall the memory module and the known good battery or the acpower adapter to test the computer with minimal devices attached first.h. Reinstall each device one at a time that you have removed in the earlier steps.If your computer does not run on battery power, disconnect and reconnect the battery cable. Refer to“Replacing the hard disk drive, hybrid drive, or solid-state drive” on page 102A power button problemProblem: The system does not respond, and you cannot turn off the computer.Solution: Turn off the computer by pressing and holding the power button for 4 seconds or more. If thesystem is still not reset, remove the ac power adapter and the battery.Boot problemsPrint these instructions now and keep them with your computer for reference later.If you receive an error message before the operating system loads, follow the appropriate corrective actionsfor POST error messages.Chapter 7.Troubleshooting computer problems 87
If you receive an error message while the operating system is loading the desktop configuration after thePOST is completed, check the following items:1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message.2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for theerror message.Sleep and hibernation problems•Problem: The computer enters sleep mode unexpectedly.Solution: If the microprocessor overheats, the computer automatically enters sleep mode to allow thecomputer to cool and to protect the microprocessor and other internal components. Check the settingsfor sleep mode.•Problem: The computer enters sleep mode (the system status indicator blinks slowly immediately afterthe power-on self-test.Solution: Make sure that:– The battery is charged.– The operating temperature is within the acceptable range. Refer to “Operating environment” on page12.If the battery is charged and the temperature is within range, have the computer serviced.•Problem: A critical low-battery error occurs, and the computer immediately turns off.Solution: The battery power is getting low. Connect the ac power adapter to the computer and plug itinto an electrical outlet, or replace the battery with a charged one.•Problem: The computer display remains blank after you press Fn to return from sleep mode.Solution: Check whether an external monitor was disconnected or turned off while the computer wasin sleep mode. If you disconnected or turned off the external monitor, connect it or turn it on beforeresuming the computer from the sleep mode. When resuming the computer from the sleep modewithout attaching the external monitor or turning it on, and the computer display remains blank, pressF7 to bring up the computer display.•Problem: The computer does not return from sleep mode, or the system status indicator blinks slowlyand the computer does not work.Solution: If the system does not return from sleep mode, it might have entered sleep or hibernation modeautomatically because the battery is depleted. Check the system status indicator.– If the system status indicator blinks slowly, your computer is in sleep mode. Connect the ac poweradapter to the computer; then press Fn.– If the system status indicator is off, your computer is in power-off state or hibernation mode. Connectthe ac power adapter to the computer; then press the power button to resume operation.If the system still does not return from sleep mode, your system might stop responding and you might notbe able to turn off the computer. In this case, you need to reset the computer. If you have not saved yourdata, it might be lost. To reset the computer, press and hold the power button for 4 seconds or more. Ifthe system is still not reset, remove the ac power adapter and the battery.•Problem: Your computer does not enter sleep or hibernation mode.Solution: Check whether any option has been selected to disable your computer from entering sleepor hibernation mode.88 User Guide
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USBconnector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USBdevice.•Problem: The battery discharges slightly while the computer is in hibernation mode.Solution: If the wakeup function is enabled, the computer consumes a small amount of power. This is nota defect. For details, refer to “Power-saving modes” on page 29.Problems with drives and other storage devicesThis section includes hard disk drive problems, hybrid drive problems, solid-state drive problems.Hard disk drive and hybrid drive problems•Problem: The hard disk drive or hybrid drive makes a rattling noise intermittently.Solution: The rattling noise might be heard:– When the hard disk drive or hybrid drive begins or finishes getting access to data.– When you carry the hard disk drive or hybrid drive.– When you carry your computer.This is a normal characteristic of a hard disk drive or hybrid drive and is not a defect.•Problem: The hard disk drive or hybrid drive does not work.Solution: On the Boot menu of ThinkPad Setup, make sure that the hard disk drive or hybrid drive is onthe Boot priority order list. If it is on the Excluded from boot order list, it is disabled. Select the entryfor it on the list and press the Shift+1 key. This moves the entry to the Boot priority order list.•Problem: After setting a hard disk password on the hard disk drive or hybrid drive of the computer, youmoved the drive to another computer. Now you cannot unlock the hard disk password.Solution: Your computer supports an enhanced password algorithm. Computers older than yours mightnot support such a security function.A solid-state drive problemProblem: When you compress files or folders by use of the data compression function in Windows, andthen decompress them, the process of writing to or reading from the files or folders is slow.Solution: Apply the disk defragmentation tool in Windows for faster access to the data.A software problemProblem: A application does not run correctly.Solution: Make sure that the problem is not being caused by the application.Check that your computer has the minimum required memory to run the application. Refer to the manualssupplied with the application.Check the following:• The application is designed to operate with your operating system.• Other applications run correctly on your computer.• The necessary device drivers are installed.• The application works when it is run on some other computer.Chapter 7.Troubleshooting computer problems 89
If an error message is displayed while you are using the application, refer to the manuals supplied with theapplication.If the application still does not run correctly, contact your place of purchase or a service representativefor help.Problems with ports and connectorsThe following are the most common problems with ports and connectors.A USB problemProblem: A device connected to the USB connector does not work.Solution: Open the Device Manager window. Make sure that the USB device setup is correct, and that theassignment of computer resource and the installation of the device driver are correct. To open the DeviceManager window, go to Control Panel and click Hardware and Sound ➙Device Manager. If you areprompted for an administrator password or confirmation, type the password or provide confirmation.A dock problemProblem: The computer does not start when you try to turn it on, and does not respond when you try toresume operation.Solution: Make sure that:• The ThinkPad OneLink Dock or ThinkPad OneLink Pro Dock is connected to power.• The computer is correctly connected to the ThinkPad OneLink Dock or ThinkPad OneLink Pro Dock.90 User Guide
Chapter 8. Recovery overviewThis chapter provides information about the recovery solutions provided by Lenovo.• “Recovery overview for the Windows 7 operating system” on page 91• “Recovery overview for the Windows 8.1 operating systems” on page 96Recovery overview for the Windows 7 operating systemThis section provides information about the recovery solutions provided by Lenovo on the Windows 7operating system.Notes:• There are a variety of methods to choose from when considering how to recover in the event of a software-or hardware-related problem. Some methods vary depending on the type of your operating system.• The product on the recovery media might be used only for the following purposes:– Restore the product preinstalled on your computer– Reinstall the product– Modify the product using the Additional FilesTo prevent potential performance risks or unexpected behavior that might be caused by the new hard diskdrive technology, it is recommended that you use one of the following software programs for backup:• ThinkVantage Rescue and Recovery 4.52 or later• Symantec Norton Ghost version 15 or laterTo start the Symantec Norton Ghost program, do the following:1. Click Start ➙Run. The Run window opens.2. Type  in the field. Then click OK.3. Type   and press Enter.• Acronis True Image 2010 or later• Paragon Backup & Recovery 10 Suit or later, Paragon Backup & Recovery 10 Home or laterCreating and using a recovery mediaYou can use recovery media to restore the hard disk drive, hybrid drive, or solid-state drive to the factorydefault settings. Recovery media are useful if you transfer the computer to another area, sell the computer,recycle the computer, or put the computer in an operational state after all other methods of recovery havefailed. As a precautionary measure, it is important to create recovery media as early as possible.Note: The recovery operations you can perform using recovery media vary depending on the operatingsystem from which the recovery media were created. The recovery media might contain a boot mediumand a data medium. Your Microsoft Windows license permits you to create only one data medium, so it isimportant that you store the recovery media in a safe place after you have made them.Creating recovery mediaThis section provides instructions on how to create recovery media.Note: You can create recovery media using discs or external USB storage devices.© Copyright Lenovo 2014 91
To create recovery media, click Start ➙All Programs ➙Lenovo ThinkVantage Tools ➙Factory RecoveryDisks. Then, follow the instructions on the screen.Using recovery mediaThis section provides instructions on how to use recovery media on different operating systems.• You can use recovery media to restore the computer to the factory default settings only. You can userecovery media to put the computer in an operational state after all other methods of recovery have failed.Attention: When you use recovery media to restore the computer to the factory default settings, all thefiles currently on the hard disk drive, hybrid drive, or solid-state drive will be deleted and replaced bythe factory default settings.To use recovery media, do the following:1. Depending on the type of your recovery media, connect the boot medium (memory key or other USBstorage device) to the computer, or insert the boot disc into the external optical drive.2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menuwindow opens, release the F12 key.3. Select the desired startup device and press Enter. The restore process begins.4. Follow the instructions on the screen to complete the operation.Notes:1. After restoring your computer to the factory default settings, you might have to reinstall device driversfor some devices. See “Reinstalling preinstalled programs and device drivers” on page 95.2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recoveror reinstall your Microsoft Office or Microsoft Works programs, you must use the Microsoft Office CDor Microsoft Works CD. These discs are provided only with computers preinstalled with MicrosoftOffice or Microsoft Works.Performing backup and recovery operationsThe Rescue and Recovery program enables you to back up all your hard disk drive, hybrid drive, orsolid-state drive contents including the operating system, data files, software programs, and personalsettings. You can designate where the Rescue and Recovery program stores the backup:• In a protected area of your hard disk drive, hybrid drive, or solid-state drive• On the secondary hard disk drive, hybrid drive, or solid-state drive if a secondary hard disk drive, hybriddrive, or solid-state drive is installed in your computer• On an attached external USB hard disk drive or solid-state drive• On a network drive• On recordable discs (a recordable external optical drive is required for this option)After you have backed up the contents on the hard disk drive, you can restore the complete contents ofthe hard disk drive, hybrid drive, or solid-state drive restore only the selected files, or restore only theWindows operating system and applications.Performing a backup operationThis section provides instructions on how to perform a backup operation using the Rescue and Recoveryprogram.1. From the Windows desktop, click Start ➙All Programs ➙Lenovo ThinkVantage Tools ➙EnhancedBackup and Restore. The Rescue and Recovery program opens.2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.92 User Guide
3. Click Back up your hard drive and select backup operation options. Then, follow the instructions onthe screen to complete the backup operation.Performing a recovery operationThis section provides instructions on how to perform a recovery operation using the Rescue and Recoveryprogram.1. From the Windows desktop, click Start ➙All Programs ➙Lenovo ThinkVantage Tools ➙EnhancedBackup and Restore. The Rescue and Recovery program opens.2. In the Rescue and Recovery program main window, click the Launch advanced Rescue and Recoveryarrow.3. Click the Restore your system from a backup icon.4. Follow the instructions on the screen to complete the recovery operation.For more information about performing a recovery operation from the Rescue and Recovery workspace, see“Using the Rescue and Recovery workspace” on page 93.Using the Rescue and Recovery workspaceThe Rescue and Recovery workspace resides in a protected, hidden area of your hard disk drive, hybriddrive, or solid-state drive that operates independently from the Windows operating system. This enables youto perform recovery operations even if you cannot start the Windows operating system. You can perform thefollowing recovery operations from the Rescue and Recovery workspace:•Rescue files from your hard disk drive or from a backupThe Rescue and Recovery workspace enables you to locate files on your hard disk drive, hybrid drive, orsolid-state drive and transfer them to a network drive or other recordable media, such as a USB device ora disc. This solution is available even if you did not back up your files or if changes were made to thefiles since your last backup operation. You also can rescue individual files from a Rescue and Recoverybackup located on your local hard disk drive, a USB device, or a network drive.•Restore your hard disk drive from a Rescue and Recovery backupIf you have backed up your hard disk drive, hybrid drive, or solid-state drive using the Rescue andRecovery program, you can restore the hard disk drive, hybrid drive, or solid-state drive from a Rescueand Recovery backup, even if you cannot start the Windows operating system.•Restore your hard disk drive to the factory default settingsThe Rescue and Recovery workspace enables you to restore the complete contents of your hard diskdrive, hybrid drive, or solid-state drive to the factory default settings. If you have multiple partitions onyour hard disk drive, hybrid drive, or solid-state drive you have the option to restore the factory defaultsettings to the C: partition and leave the other partitions intact. Because the Rescue and Recoveryworkspace operates independently from the Windows operating system, you can restore the factorydefault settings even if you cannot start the Windows operating system.Attention: If you restore the hard disk drive, hybrid drive, or solid-state drive from a Rescue and Recoverybackup or restore the hard disk drive, hybrid drive, or solid-state drive to the factory default settings, allfiles on the primary hard disk drive partition (usually drive C:) will be deleted in the recovery process. Ifpossible, make copies of important files. If you are unable to start the Windows operating system, you canuse the rescue files feature of the Rescue and Recovery workspace to copy files from your hard disk drive,hybrid drive, or solid-state drive to other media.To start the Rescue and Recovery workspace, do the following:1. Make sure that the computer is turned off.2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps orsee a logo screen, release the F11 key.Chapter 8.Recovery overview 93
3. If you have set a Rescue and Recovery password, type your password when prompted. The Rescueand Recovery workspace opens after a short delay.Note: If the Rescue and Recovery workspace fails to open, see “Solving recovery problems” on page 96.4. Do one of the following:• To rescue files from your hard disk drive, hybrid drive, or solid-state drive or from a backup, clickRescue files and follow the instructions on the screen.• To restore your hard disk drive, hybrid drive, or solid-state drive from a Rescue and Recovery backupor to restore your hard disk drive, hybrid drive, or solid-state drive to the factory default settings, clickRestore your system and follow the instructions on the screen.For more information about the features of the Rescue and Recovery workspace, click Help.Notes:1. After restoring your hard disk drive, hybrid drive, or solid-state drive to the factory default settings, youmight have to reinstall device drivers for some devices. See “Reinstalling preinstalled programs anddevice drivers” on page 95.2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recoveror reinstall your Microsoft Office or Microsoft Works programs, you must use the Microsoft Office CDor Microsoft Works CD. These discs are provided only with computers preinstalled with MicrosoftOffice or Microsoft Works.Creating and using a rescue mediumWith a rescue medium, such as a disc or a USB hard disk drive, you can recover the computer fromfailures that prevent you from gaining access to the Rescue and Recovery workspace on your hard diskdrive, hybrid drive, or solid-state drive.Notes:1. The recovery operations you can perform using a rescue medium vary depending on the operatingsystem.2. The rescue disc can be started in all types of optical drives.Creating a rescue mediumThis section provides instructions on how to create a rescue medium.1. From the Windows desktop, click Start ➙All Programs ➙Lenovo ThinkVantage Tools ➙EnhancedBackup and Restore. The Rescue and Recovery program opens.2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.3. Click the Create Rescue Media icon. The Create Rescue and Recovery Media window opens.4. In the Rescue Media area, select the type of the rescue medium you want to create. You can create arescue medium using a disc, a USB hard disk drive, or a secondary internal hard disk drive.5. Click OK and follow the instructions on the screen to create a rescue medium.Using a rescue mediumThis section provides instructions on how to use the rescue medium you have created.• If you have created a rescue medium using a disc, use the following instructions to use the rescue medium:1. Turn off your computer.2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menuwindow opens, release the F12 key.94 User Guide
3. In the Boot Menu window, select the desired external optical drive as the first boot device. Then,insert the rescue disc into the external optical drive and press Enter. The rescue medium starts.• If you have created a rescue medium using a USB hard disk drive, use the following instructions touse the rescue medium:1. Attach the USB hard disk drive to one of the USB connectors on your computer.2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menuwindow opens, release the F12 key.3. In the Boot Menu window, select the USB hard disk drive as the first boot device and press Enter.The rescue medium starts.When the rescue medium starts, the Rescue and Recovery workspace opens. The help information foreach feature is available from the Rescue and Recovery workspace. Follow the instructions to completethe recovery process.Reinstalling preinstalled programs and device driversYour computer has provisions that enable you to reinstall selected factory-installed programs and devicedrivers.Reinstalling preinstalled programsTo reinstall some preinstalled application programs, do the following:1. Turn on your computer.2. Go to the  directory.3. Open the APPS folder. The folder contains several subfolders named for the various preinstalledapplications.4. Open the subfolder for the application you want to reinstall.5. Double-click Setup, and then follow the on-screen steps to reinstall the application.Reinstalling preinstalled device driversAttention: When you reinstall device drivers, you are changing the current configuration of your computer.Reinstall device drivers only when it is necessary to correct a problem with your computer.To reinstall a device driver for a factory-installed device, do the following:1. Turn on your computer.2. Go to the  directory.3. Open the DRIVERS folder. The folder contains several subfolders named for the various devicesinstalled in your computer (for example, AUDIO and VIDEO).4. Open the subfolder for the device.5. Reinstall the device driver by one of the following methods:• In the subfolder for the device, look for a text file (a file with the extension .txt). The text file containsinformation on how to reinstall that device driver.• If the subfolder for the device contains a file of setup information (a file with the extension .inf), youcan use the Add New Hardware program (in the Windows Control Panel) to reinstall the device driver.Not all device drivers can be reinstalled by use of this program. In the Add New Hardware program,when prompted for the device driver you want to install, click Have Disk and Browse. Then selectthe device driver file from the device subfolder.• In the subfolder for the device, look for the executable file (a file with the extension .exe). Double-clickthe file, and follow the instructions on the screen.Chapter 8.Recovery overview 95
Attention: If you need updated device drivers for your computer, do not download them from the WindowsUpdate Web site. Obtain them from Lenovo. For more information, see “Making sure device drivers arecurrent” on page 68.Solving recovery problemsIf you are unable to access the Rescue and Recovery workspace or the Windows environment, do oneof the following:• Use a rescue medium to start the Rescue and Recovery workspace. See “Creating and using a rescuemedium” on page 94.• Use recovery media if all other methods of recovery have failed and you need to restore the harddisk drive, hybrid drive, or solid-state drive to the factory default settings. See “Creating and using arecovery media” on page 91.Note: If you are unable to access the Rescue and Recovery workspace or the Windows environmentfrom a rescue medium or recovery media, you might not have the rescue device (an internal hard diskdrive, a disc, a USB hard disk drive, or other external devices) set as the first boot device in the startupdevice sequence. You must first make sure that your rescue device is set as the first boot device in thestartup device sequence in the ThinkPad Setup program. For detailed information on how to temporarily orpermanently change the startup device sequence, see “Startup menu” on page 64.It is important to create a rescue medium and a set of recovery media as early as possible and store themin a safe place for future use.Recovery overview for the Windows 8.1 operating systemsThis section provides information about the recovery solutions for the Windows 8.1 operating systems.A Windows recovery image is preinstalled in the recovery partition on your computer. The Windows recoveryimage enables you to refresh your computer, or reset your computer to the factory default settings.You can create recovery media as backups or replacement for the Windows recovery image. With therecovery media, you can troubleshoot and fix the problems on your computer even if you cannot start theWindows 8.1 operating system. It is recommended that you create recovery media as early as possible. Formore information, see “Creating and using recovery media” on page 97.Refreshing your computerIf your computer does not perform well and the problem might be caused by a recently installed program,you can refresh your computer without losing your personal files or changing your settings.Attention: If you refresh your computer, the programs that came with your computer and the programs thatyou installed from Windows Store will be reinstalled, but all other programs will be removed.To refresh your computer, do the following:1. Move your pointer to the top-right or bottom-right corner of the screen to display the charms. ClickSettings ➙Change PC settings ➙Update and recovery ➙Recovery.2. In the Refresh your PC without affecting your files section, click Get started.3. Follow the instructions on the screen to refresh your computer.96 User Guide
Resetting your computer to the factory default settingsIf you want to recycle your computer or just start over, you can reset your computer to the factory defaultsettings. Resetting the computer will reinstall the operating system, reinstall all the programs that came withyour computer, and reset all the settings to the factory default settings.Attention: If you reset the computer to the factory default settings, all your personal files and settings will bedeleted. To avoid data loss, make a backup copy of all the data that you want to keep.To reset your computer to the factory default settings, do the following:1. Move your pointer to the top-right or bottom-right corner of the screen to display the charms. ClickSettings ➙Change PC settings ➙Update and recovery ➙Recovery.2. In the Remove everything and reinstall Windows section, click Get started. Then click Next toconfirm the operation.3. Depending on your needs, do one of the following:• To perform a quick format, click Just remove my files to start the process. The process will takeseveral minutes.• To perform a complete format, click Fully clean the drive to start the process. The process willtake several hours.4. Follow the instructions on the screen to reset your computer to the factory default settings.Using the advanced startup optionsWith the advanced startup options, you can change the firmware settings of the computer, change thestartup settings of the Windows operating system, start the computer from an external device, or restore theWindows operating system from a system image.To use the advanced startup options, do the following:1. Move your pointer to the top-right or bottom-right corner of the screen to display the charms. ClickSettings ➙Change PC settings ➙Update and recovery ➙Recovery.2. In the Advanced startup section, click Restart now ➙Troubleshoot ➙Advanced options.3. Select a desired startup option, then follow the instructions on the screen.Recovering your operating system if Windows 8.1 fails to startThe Windows recovery environment on your computer is capable of operating independently from theWindows 8.1 operating system. This enables you to recover or repair the operating system even if theWindows 8.1 operating system fails to start.After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Thenyou can choose repair and recovery options by following the instructions on the screen.Note: Ensure that your computer is connected to ac power during the recovery process.Creating and using recovery mediaYou can create recovery media as backups for the Windows recovery environment and the Windowsrecovery image. If you cannot start the computer, you can use recovery media to troubleshoot and fix theproblems on your computer.It is recommended that you create recovery media as early as possible. Once you create recovery media,keep them in a safe place and do not use them to store other data.Chapter 8.Recovery overview 97
Creating recovery mediaTo create recovery media, you need a USB drive with at least 8 GB of storage. The required USB capacitydepends on the size of the recovery image.Attention: Creating recovery media will delete anything stored on the USB drive. To avoid data loss, make abackup copy of all the data that you want to keep.To create recovery media, do the following:Note: Ensure that your computer is connected to ac power.1. Move your pointer to the top-right or bottom-right corner of the screen to display the charms, andclick Search.2. Type  in the Search field and click the Search button. Then click Create a recovery drive.3. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start.4. Ensure that you select the Copy the recovery partition from the PC to the recovery drive. option.Then click Next.Important: If you clear the Copy the recovery partition from the PC to the recovery drive. option,you will create recovery media without the recovery partition content. You still can start the computerfrom the recovery media, but you might be unable to recover your computer if the recovery partition onyour computer is damaged.5. Connect a proper USB drive then click Next.6. Click Create in the Recovery Drive window. The creation of the recovery media starts.7. When the creation of the recovery media finishes, do one of the following:• To keep the recovery partition on your computer, click Finish.• To delete the recovery partition on your computer, click Delete the recovery partition.Attention: If you delete the recovery partition on your computer, do keep the recovery media in asafe place. The Windows recovery image will not be stored in your computer anymore, and you willneed the recovery media to refresh or reset your computer.8. Remove the USB drive. The recovery media are created successfully.Using recovery mediaIf you cannot start your computer, or if you cannot start the Windows recovery image on your computer, userecovery media to recover your computer.To use recovery media, do the following:Note: Ensure that your computer is connected to ac power.1. Turn on or restart the computer. Before the Windows operating system starts, repeatedly press the F12key. The Boot Menu window opens.2. Select the recovery drive as the boot device.3. Select a preferred language and then select a preferred keyboard layout.4. Click Troubleshoot to display the optional recovery solutions.5. Select a corresponding recovery solution according to your situation. For example, select Reset yourPC if you want to reset your computer to the factory default settings.For more information about the recovery solutions provided by the Windows 8.1 operating system, go to:http://go.microsoft.com/fwlink/?LinkID=26380098 User Guide
Chapter 9. Replacing devicesThis chapter provides instructions on how to install or replace hardware for your computer.• “Static electricity prevention” on page 99• “Replacing the coin-cell battery” on page 99• “Replacing the hard disk drive, hybrid drive, or solid-state drive” on page 102• “Replacing the memory module” on page 106• “Replacing a wireless LAN card” on page 109• “Replacing the keyboard” on page 113Static electricity preventionStatic electricity, although harmless to you, can seriously damage computer components and options.Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option ora CRU, do not open the static-protective package that contains the part until the instructions direct youto install the part.When you handle options or CRUs, or perform any work inside the computer, take the following precautionsto avoid static-electricity damage:• Limit your movement. Movement can cause static electricity to build up around you.• Always handle components carefully. Handle adapters, memory modules, and other circuit boards by theedges. Never touch exposed circuitry.• Prevent others from touching components.• When you install a static-sensitive option or CRU, touch the static-protective package that contains thepart to a metal expansion-slot cover or other unpainted metal surface on the computer for at least twoseconds. This reduces static electricity in the package and your body.• When possible, remove the static-sensitive part from the static-protective package and install the partwithout setting it down. When this is not possible, place the static-protective package on a smooth,level surface and place the part on the package.• Do not place the part on the computer cover or other metal surface.Replacing the coin-cell batteryBefore you start, print these instructions.Prerequisites for the procedureDANGERIf the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell batterycontains a small amount of harmful substances. To avoid possible injury:• Replace only with a battery of the type recommended by Lenovo.• Keep the battery away from fire.• Do not expose it to excessive heat.• Do not expose it to water or rain.© Copyright Lenovo 2014 99
• Do not short-circuit it.• Do not drop, crush, or puncture the battery, or make it subject to strong forces. Battery abuseor mishandling can cause the battery to overheat, which can cause gasses or flame to “vent”from the battery or coin-cell battery.To replace the coin-cell battery, do the following:1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Waitseveral minutes to let the computer cool.2. Close the computer display and turn the computer over.3. Loosen the screws 1and then remove the cover 2.4. Disconnect the battery connector.100 User Guide
5. Detach the connector 1. Then remove the coin-cell battery 2.6. Install the coin-cell battery 1. Then attach the connector 2.7. Connect the battery cable.Chapter 9.Replacing devices 101
8. Attach the cover 1and pivot it downwards 2. Then tighten the screws 3.9. Turn the computer over again. Connect the ac power adapter and all cables.Replacing the hard disk drive, hybrid drive, or solid-state driveBefore you start, print these instructions.Attention: The hard disk drive, hybrid drive, or solid-state drive is very sensitive. Incorrect handling cancause damage and permanent loss of data. Observe the following guidelines:• Replace the hard disk drive, hybrid drive, or solid-state drive only if you upgrade it or have it repaired.The connectors and slot of the hard disk drive, hybrid drive, or solid-state drive are not designed forfrequent changes or drive swapping.• Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, thatabsorbs any physical shocks.• Do not apply pressure to the cover of the drive.• Do not touch the connector.• Before removing the hard disk drive, hybrid drive, or solid-state drive, make a backup copy of all theinformation on it and then turn off the computer.• Never remove the drive while the computer is operating, in sleep mode, or in hibernation mode.To replace the hard disk drive, hybrid drive, or solid-state drive, do the following:1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer. Waitseveral minutes to let the computer cool.2. Close the computer display and turn the computer over.102 User Guide
3. Loosen the screws 1and then remove the cover 2.4. Disconnect the battery connector.Chapter 9.Replacing devices 103
5. Remove the screws that secure the hard disk drive, hybrid drive, or solid-state drive.6. Lift the tab and remove the hard disk drive, hybrid drive, or solid-state drive.7. Insert the hard disk drive, hybrid drive, or solid-state drive into the slot 1and position the hard diskdrive, hybrid drive, or solid-state drive firmly into place 2.104 User Guide
8. Install the screws to secure the hard disk drive, hybrid drive, or solid-state drive.9. Connect the battery cable.Chapter 9.Replacing devices 105
10. Attach the cover 1and pivot it downwards 2. Then tighten the screws 3.11. Turn the computer over. Connect the ac power adapter and all cables.Replacing the memory moduleBefore you start, print these instructions.Increasing memory capacity is an effective way to make programs run faster. To replace or add a memorymodule, read the following prerequisites and then the instructions.When replacing a memory module, be sure to follow the precautions.Note: The operating speed of the memory module has dependency on the system configuration. In someconditions, the memory module in your computer might not be able to operate at the maximum speed.Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. Thisaction reduces any static electricity from your body. The static electricity could damage the memory module.Replacing the memory moduleTo replace the memory module, do the following:1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer. Waitseveral minutes to let the computer cool.2. Close the computer display and turn it over.106 User Guide
3. Loosen the screws 1and then remove the cover 2.4. Disconnect the battery connector.Chapter 9.Replacing devices 107
5. Open the latches on both sides of the slot at the same time 1and then remove the memory module 2.6. Place the notched end of the new memory module toward the contact edge side of the memory slot,and insert the memory module 1into the slot at an angle of about 20 degrees. Pivot the memorymodule downward until it snaps into place 2. Ensure that the memory module is firmly installed inthe slot and cannot be moved easily.Attention: Do not touch the contact edge of the memory module. Otherwise the memory modulemight be damaged.108 User Guide
7. Connect the battery cable.8. Attach the cover 1and pivot it downwards 2. Then tighten the screws 3.9. Turn the computer over. Connect the ac power adapter and all cables.Replacing a wireless LAN cardBefore you start, print these instructions.Attention: Before you start installing a wireless LAN card, touch a metal table or a grounded metal object.This action reduces any static electricity from your body. The static electricity could damage the card.To replace the wireless LAN card, do the following:1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer. Waitseveral minutes to let the computer cool.2. Close the computer display and turn the computer over.Chapter 9.Replacing devices 109
3. Loosen the screws 1and then remove the cover 2.4. Disconnect the battery connector.110 User Guide
5. If a tool is provided with the new card to help you disconnect cables, use the tool to disconnect thecables from the old card. If no such a tool is provided, hold the cable connector with your fingers andgently disconnect each cable from the old card.6. Remove the screw 1. The card pops up. Then remove the card 2.Chapter 9.Replacing devices 111
7. Align the contact edge of the new card with the corresponding socket 1. Pivot the new card downwardand then install the screw to secure the new card 2.8. Connect the antenna cables to the new card as shown.9. Connect the battery cable.112 User Guide
10. Attach the cover 1and pivot it downwards 2. Then tighten the screws 3.11. Turn the computer over. Connect the ac power adapter and all cables.Replacing the keyboardRemoving the keyboardTo remove the keyboard, do the following:1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer. Waitseveral minutes to let the computer cool.2. Close the computer display and turn the computer over.3. Loosen the screws 1and then remove the cover 2.Chapter 9.Replacing devices 113
4. Disconnect the battery connector.5. Remove the screws that secure the keyboard.6. Push hard in the direction shown to unlatch the keyboard.114 User Guide
7. Pivot the keyboard slightly upward 1until you can see the connectors on the bottom side of thekeyboard. Then turn over the keyboard as shown 2.8. Gently put the keyboard on the palm rest and detach the connectors. Then remove the keyboard.Installing the keyboardTo install the keyboard, do the following:Chapter 9.Replacing devices 115
1. Attach the connectors and then turn over the keyboard.2. Insert the keyboard into the space under the keyboard-bezel frame as shown. Ensure that the edge ofthe keyboard is under the keyboard-bezel frame as shown.116 User Guide
3. Slide the keyboard in the direction shown by the arrows.4. Install the screws to secure the keyboard.5. Connect the battery cable.Chapter 9.Replacing devices 117
6. Attach the cover 1and pivot it downwards 2. Then tighten the screws 3.7. Turn the computer over. Connect the ac power adapter and all cables.118 User Guide
Chapter 10. Getting supportThis chapter provides information about getting help and support from Lenovo.• “Before you contact Lenovo” on page 119• “Getting help and service” on page 119• “Purchasing additional services” on page 121Before you contact LenovoOften, you can solve your computer problems by referring to the information in the explanations of errorcodes, running diagnostic programs, or by consulting the Lenovo Web site.Registering your computerRegister your computer with Lenovo. For more information, see “Registering your computer” on page 17.Downloading system updatesDownloading updated software might resolve problems you experience with your computer.To download updated software, go to the following Web site and follow the instructions on the screen:http://www.lenovo.com/supportRecording informationBefore you talk to a Lenovo representative, record the following important information about your computer.Recording problem symptoms and detailsCollect the answers to the questions below before you call for help. Then, you will be able to get helpas quickly as possible.• What is the problem? Is it continuous or intermittent?• Is there an error message? What is the error code, if any?• What operating system are you using? Which version?• Which software programs were running at the time of the problem?• Can the problem be reproduced? If so, how?Recording system informationThe serial number label is on the bottom of your computer. Record the machine type and the serial number.• What is the name of your Lenovo product?• What is the machine type?• What is the serial number?Getting help and serviceIf you need help, service, technical assistance, or just want more information about Lenovo products, youwill find a wide variety of sources available from Lenovo to assist you. This section contains informationabout where to go for additional information about Lenovo and our products, what to do if you experience aproblem with your computer, and whom to call for service should it be necessary.© Copyright Lenovo 2014 119
Information about your computer and preinstalled software, if any, is available in the documentation thatcomes with your computer. The documentation includes printed books, online books, readme files, and helpfiles. In addition, information about Lenovo products is available on the World Wide Web.Microsoft Service Packs are the latest software source for Windows product updates. They are availablethrough Web download (connection charges might apply) or through disc. For more specific information andlinks, go to http://www.microsoft.com. Lenovo offers technical assistance with installation of, or questionsrelated to, Service Packs for your Lenovo-preinstalled Microsoft Windows product. For information, contactthe Customer Support Center.Using diagnostic programsMany computer problems can be solved without outside assistance. If you experience a problem with yourcomputer, the first place to start is the troubleshooting information in your computer documentation. If yoususpect a software problem, see the documentation, including readme files and help information systems,that comes with the operating system or application program.ThinkPad notebook computers come with a set of diagnostic programs that you can use to help you identifyhardware problems. See “Diagnosing problems” on page 73 for instructions on how to use the diagnosticprograms.The troubleshooting information or the diagnostic programs might tell you that you need additional orupdated device drivers or other software. You can get the latest technical information and download devicedrivers and updates from the Lenovo Web site at http://www.lenovo.com/support.Lenovo Support Web siteTechnical support information is available on the Lenovo Support Web site at:http://www.lenovo.com/supportThis Web site is updated with the latest support information such as the following:• Drivers and software• Diagnostic solutions• Product and service warranty• Product and parts details• User guides and manuals• Knowledge base and frequently asked questionsCalling LenovoIf you have tried to correct the problem yourself and still need help, during the warranty period, you canget help and information by telephone through the Customer Support Center. The following services areavailable during the warranty period:• Problem determination - Trained personnel are available to assist you with determining if you have ahardware problem and deciding what action is necessary to fix the problem.• Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty,trained service personnel are available to provide the applicable level of service.• Engineering change management - Occasionally, there might be changes that are required after a producthas been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes(ECs) that apply to your hardware available.The following items are not covered:120 User Guide
• Replacement or use of parts not manufactured for or by Lenovo or nonwarranted partsNote: All warranted parts contain a 7-character or 10-character identification in the format FRU XXXXXXXor FRU XXXXXXXXXX.• Identification of software problem sources• Configuration of UEFI BIOS as part of an installation or upgrade• Changes, modifications, or upgrades to device drivers• Installation and maintenance of network operating systems (NOS)• Installation and maintenance of application programsFor the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product,see “Warranty information” in the Safety, Warranty, and Setup Guide that comes with your computer.If possible, be near your computer when you make your call in case the technical assistance representativeneeds to help you resolve a computer problem. Ensure that you have downloaded the most current driversand system updates, run diagnostics, and recorded information before you call. When calling for technicalassistance, have the following information available:• Machine type and model• Serial numbers of your computer, monitor, and other components, or your proof of purchase• Description of the problem• Exact wording of any error messages• Hardware and software configuration information for your systemTelephone numbersFor a list of the Lenovo Support phone numbers for your country or region, go tohttp://www.lenovo.com/support/phone or refer to the Safety, Warranty, and Setup Guide that comes withyour computer.Note: Phone numbers are subject to change without notice. The latest phone numbers are available athttp://www.lenovo.com/support/phone. If the number for your country or region is not provided, contactyour Lenovo reseller or Lenovo marketing representative.Purchasing additional servicesDuring and after the warranty period, you can purchase additional services, such as support for Lenovoand non-Lenovo hardware, operating systems, and application programs; network setup and configurationservices; upgraded or extended hardware repair services; and custom installations services. Serviceavailability and service name might vary by country.For more information about these services, go to:http://www.lenovo.com/accessories/services/index.htmlChapter 10.Getting support 121
122 User Guide
Chapter 11. You and your computerThis chapter provides information about accessibility, comfort, and travelling with your computer.Accessibility and comfortGood ergonomic practice is important to get the most from your personal computer and to avoid discomfort.Arrange your workplace and the equipment you use to suit your individual needs and the kind of workthat you perform. In addition, use healthy work habits to maximize your performance and comfort whileusing your computer.The following topics provide information about arranging your work area, setting up your computerequipment, and establishing healthy work habits.Lenovo is committed to providing the latest information and technology to our customers with disabilities.Refer to the accessibility information that outlines our efforts in this area. See “Accessibility information” onpage .Ergonomic informationWorking in the virtual office might mean adapting to frequent changes in your environment. For example,adapting to the surrounding lighting sources, proper seating, and the placement of your computer hardware,can help you improve your performance and achieve greater comfort.The following example shows someone in a conventional setting. Even when not in such a setting, you canfollow many of these tips. Develop good habits, and they will serve you well.General posture: Make minor modifications in your working posture to deter the onset of discomfortcaused by long periods of working in the same position. Frequent, short breaks from your work also helpto prevent minor discomfort associated with your working posture.Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches).Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the displayscreen clean and set the brightness to levels that enable you to see the screen clearly.© Copyright Lenovo 2014 123
Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments tobest suit your desired posture.Arm and hand position: Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position.Type with a soft touch without pounding the keys.Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.What if you are traveling?It might not be possible to observe the best ergonomic practices when you are using your computerwhile on the move or in a casual setting. Regardless of the setting, try to observe as many of the tips aspossible. Sitting properly and using adequate lighting, for example, will help you maintain desirable levelsof comfort and performance.Questions about vision?The visual display screens of ThinkPad notebook computers are designed to meet the highest standardsand to provide you with clear, crisp images and large, bright displays that are easy to see, yet easy on theeyes. Of course, any concentrated and sustained visual activity can be tiring. If you have questions on eyefatigue or visual discomfort, consult a vision-care specialist for advice.ComfortObserve the following guidelines to achieve greater comfort and improve performance.Active sitting and rest breaks: The longer you sit and work with your computer, the more important it is toobserve your working posture. Follow “Ergonomic information” on page 123 and practice “active sitting” toavoid discomfort associated with your working postures. Making minor voluntary postural changes andtaking short frequent work breaks are the key ingredients for healthy computing. Your computer is light andmobile; you can easily reposition your working surface to accommodate many posture modifications.Work area setup options: Familiarize yourself with all of your office furniture so that you know how to adjustyour work surface, seat, and other work tools to accommodate your preferences for comfort. If your workarea is not in an office setting, be sure to take special note of employing active sitting and taking workbreaks. Many ThinkPad product solutions are available to help you modify and expand your computer tobest suit your needs. You can find some of these options at http://www.lenovo.com/essentials. Explore youroptions for docking solutions and external products that provide the adjustability and features that you want.Accessibility informationLenovo is committed to providing people with disabilities greater access to information and technology.Some technologies are already provided in your operating system. Others can be purchased throughvendors.Users also can use the Ease of Access Center provided in the Windows operating system to configure theircomputers to suit their physical and cognitive needs. The Ease of Access Center is a central locationthat you can use to configure the accessibility settings and programs available in the Microsoft Windowsoperating system. To use the Ease of Access Center, open Control Panel and click Ease of Access➙Ease of Access Center.The following information provides ways to help users who have hearing, vision, and mobility limitations getthe most out of their computer experience.124 User Guide
On-screen notificationOn-screen notification helps hearing-impaired people be aware of the status of their computer. On-screennotification replaces sounds with visual cues or text captions to indicate that activity is happening on thecomputer. As a result, system alerts are noticeable even when they are not heard. For example, when youselect one object with your keyboard, the object is highlighted. When you move the pointer to one objectwith your mouse, the introductory text of the object is displayed.To use on-screen notification, open Control Panel, click Ease of Access ➙Ease of Access Center, andthen click Use text or visual alternative for sounds.Audio notificationAudio notification helps visually impaired people or people with weak sight be aware of the status of theircomputer.To use audio notification, open Control Panel, click Ease of Access ➙Ease of Access Center ➙Use thecomputer without a display, and then select Turn on Audio Description.NarratorNarrator is a screen reader that reads what is displayed on the screen aloud and describes events likeerror messages.To open Narrator, do the following:• For Windows 7: Click the Start button. Then, type  into the search field. In the list of results,click Narrator.• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type into the displayed search box. If you are using a keyboard, you can just start typing on the Start screen andthen the search box and search results are displayed automatically. In the list of results, click Narrator.For more information about how to use and configure Narrator, see the Windows Help and Supportinformation system.Screen-reader technologiesScreen-reader technologies are primarily focused on software program interfaces, help information systems,and a variety of online documents. For additional information about screen readers, see the following:• Using PDFs with screen readers:http://www.adobe.com/accessibility.html?promoid=DJGVE• Using the JAWS screen reader:http://www.freedomscientific.com/jaws-hq.asp• Using the NVDA screen reader:http://www.nvaccess.org/Speech RecognitionSpeech Recognition enables you to control your computer by voice.Using only your voice, you can start programs, open menus, click buttons and other objects on the screen,dictate text into documents, and write and send e-mails. Everything you do with the keyboard and mousecan be done with only your voice.To open Speech Recognition, do the following:• For Windows 7: Click the Start button. Then, type   into the search field. In the listof results, click Speech Recognition.Chapter 11.You and your computer 125
• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type  into the displayed search box. If you are using a keyboard, you can just start typing on theStart screen and then the search box and search results are displayed automatically. In the list of results,click Speech Recognition.For more information about how to use and configure Speech Recognition, see the Windows Help andSupport information system.Customizable text sizeDepending on your preference, you can change only the text size instead of changing the size of everythingon the desktop. To change the text size, open Control Panel and click Appearances and Personalization ➙Display. Then, go to Change only the text size and set a text size that meets your needs.MagnifierYour computer is equipped with the Microsoft Magnifier to help visually impaired people use the computermore comfortably. Magnifier is a useful utility that enlarges part or all of your screen so that you can see thewords and images better. Magnifier is part of the Ease of Access Center.To open Magnifier, do the following:• For Windows 7: Click the Start button, click All Programs ➙Accessories ➙Ease of Access, andthen click Magnifier.• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type into the displayed search box. If you are using a keyboard, you can just start typing on the Start screen andthen the search box and search results are displayed automatically. In the list of results, click Magnifier.For more information about how to use and configure Magnifier, see the Windows Help and Supportinformation system.Note: For touch-screen computer models, you also can zoom in and zoom out by using touch gesturesinstead of the keyboard. See “Zoom” on page 126.ZoomYou can use the zoom feature to enlarge or reduce the size of text, pictures, maps, or other objects.• From the keyboard:– Zoom in: Press the Windows logo key + the plus-sign key (+) to enlarge the size of text, pictures,maps, or other objects.– Zoom out: Press the Windows logo key + the minus-sign (-) key to reduce the size of text, pictures,maps, or other objects.• From the touch screen:– Zoom in: Move two fingers farther apart on the touch screen to enlarge the size of text, pictures,maps, or other objects.– Zoom out: Move two fingers closer together on the touch screen to reduce the size of text, pictures,maps, or other objects.Screen resolutionYou can make your documents easier to read by adjusting the screen resolution of your computer. To adjustthe screen resolution, right click anywhere on the desktop, click Screen resolution, and then adjust thesettings as you prefer.Note: Setting too low of a resolution might prevent some items from fitting on the screen.126 User Guide
For alternatives on increasing the size of text and other objects, see the following:• “Customizable text size” on page 126• “Magnifier” on page 126• “Zoom” on page 126Ease of Access keyboard shortcutsKeyboard shortcuts are combinations of two or more keys that you can use to perform a task that wouldtypically require a mouse or other pointing devices. Keyboard shortcuts provide an easier alternative tointeract with your computer as you work with the Windows operating system and most applications.The following table contains keyboard shortcuts that can help make your computer easier to use.Keyboard shortcut FunctionWindows logo key + U Open the Ease of Access CenterRight Shift for eight seconds Turn Filter Keys on or offShift five times Turn Sticky Keys on or offNum Lock for five seconds Turn Toggle Keys on or offLeft Alt+Left Shift+Num Lock Turn Mouse Keys on or offLeft Alt+Left Shift+PrtScn (or PrtSc) Turn High Contrast on or offFor more information, go to http://windows.microsoft.com/, and then type any of the following keywords forsearching:  , , , .On-Screen KeyboardIf you prefer to type or enter data into your computer without using a physical keyboard, you can useOn-Screen Keyboard. On-Screen Keyboard displays a visual keyboard with all the standard keys. You canselect keys using the mouse or another pointing device, or you can tap to select the keys if your computersupports multi-touch screen.To open On-Screen Keyboard, do the following:• For Windows 7: Click the Start button. Then, type   into the search field. In the list ofresults, click On-Screen Keyboard.• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type  into the displayed search box. If you are using a keyboard, you can just start typingon the Start screen and then the search box and search results are displayed automatically. In the list ofresults, click On-Screen Keyboard.For more information about how to use and configure On-Screen Keyboard, see the Windows Help andSupport information system.Personalized keyboardThe tactile bumps on the keyboard provide a reference point from which you can easily locate all keys onthe keyboard without visual assistance.To adjust your keyboard settings, open Control Panel, click Ease of Access ➙Ease of Access Center,and then click Make the keyboard easier to use.Chapter 11.You and your computer 127
Industry-standard connectorsYour computer provides industry-standard connectors that enable you to connect assistive devices,if needed.For more information on the location and function of each connector, see “” on page .Smart latchesThe smart latches on some ThinkPad notebook computer lid and the removable battery enable you toopen your computer lid and remove the removable battery using only one hand with physical strength ofless than 22.2 N.Documentation in accessible formatsLenovo provides electronic documentation in accessible formats. Lenovo electronic documentation, such asproperly tagged PDF files or HyperText Markup Language (HTML) files, is developed to ensure that visuallyimpaired users can read the documentation through a screen reader. Each image in the documentation alsoincludes adequate alternative text to explain the image so that visually impaired users can understand theimage when they use a screen reader.Traveling with your computerThis topic provides information to help you work with your computer when you are travelling.Travel tipsUse the following travel tips to travel more confidently and efficiently with your computer.• Although it is safe to allow your computer to go through the x-ray machines at airport security stations, itis important to keep your eyes on the computer at all times to prevent theft.• Consider bringing an electrical adapter for use in an airplane or automobile.• If you carry an ac power adapter, detach the ac cord from it to avoid damaging the cord.Travel tips on airplanesIf you carry your computer into an airplane, take note of the following tips:• If you intend to use your computer or wireless services (such as Internet and Bluetooth), check with theairline for restrictions and availability of services before boarding the airplane. If there are restrictionson the use of computers with wireless features on the airplane, you must abide by those restrictions. Ifnecessary, disable wireless features before boarding.• Be careful about the seat in front of you on airplanes. Angle your computer display so that it does not getcaught when the person in front of you leans back.• When taking off, remember to turn off your computer or put it into hibernate mode.Travel accessoriesThe following is a checklist of items to consider packing when you are going to travel:• ThinkPad ac power adapter• ThinkPad AC/DC Combo Adapter• External mouse, if you are accustomed to using one• Ethernet cable• Extra battery, charged• A quality carrying case that provides adequate cushion and protection128 User Guide
• External storage deviceIf you are traveling to another country, you might also want to consider the following items:• An ac power adapter for the country to which you are travelling• An adapter to connect to a phone line in that country (for models equipped with a modem)To purchase travel accessories, go to http://www.lenovo.com/essentials.Chapter 11.You and your computer 129
130 User Guide
Appendix A. Regulatory informationWireless related informationWireless interoperabilityWireless LAN Card is designed to be interoperable with any wireless LAN product that is based on DirectSequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal FrequencyDivision Multiplexing (OFDM) radio technology, and is compliant to:• The 802.11b/g Standard, 802.11a/b/g, 802.11n, or 802.11ac on Wireless LANs, as defined and approvedby the Institute of Electrical and Electronics Engineers.• The Wireless Fidelity (WiFi) certification as defined by the Wi-Fi Alliance.A Bluetooth device is designed to be interoperable with any Bluetooth products that are compliant toBluetooth Specification Specification 4.0 as defined by the Bluetooth SIG. The following profiles aresupported by Bluetooth devices:• Advanced Audio Distribution Profile (A2DP)• Audio/Video Control Transport Protocol (AVCTP)• Audio/Video Distribution Transport Protocol (AVDTP)• A/V Remote Control Profile (AVRCP)• Basic Imaging Profile (BIP)• Basic Printing Profile (BPP)• Dial-Up Networking Profile (DUN)• File Transfer Profile (FTP)• Generic Access Profile (GAP)• Generic A/V Distribution Profile (GAVDP)• Hardcopy Cable Replacement Profile (HCRP)• Headset Profile (HSP)• Hands-Free Profile (HFP)• Human Interface Device Profile (HID)• Message Access Profile (MAP)• Object Exchange Protocol (OBEX)• Object Push Profile (OPP)• Personal Area Networking Profile (PAN)• Phone Book Access Profile (PBAP)• Service Discovery Protocol (SDP)• Synchronization Profile (SYNC)• Video Distribution Profile (VDP)• Generic Attribute Profile (GATT)• Proximity Profile• Find Me Profile© Copyright Lenovo 2014 131
• Immediate Alert Profile• Battery Status ProfileUsage environment and your healthIntegrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, thelevel of energy emitted is far much less than the electromagnetic energy emitted by wireless devices likefor example mobile phones.Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safetystandards and recommendations, Lenovo believes they are safe for use by consumers. These standards andrecommendations reflect the consensus of the scientific community and result from deliberations of panelsand committees of scientists who continually review and interpret the extensive research literature.In some situation or environment, the use of integrated wireless cards might be restricted by the proprietorof the building or responsible representatives of the organization. These situations and areas might forexample include:• Using the integrated wireless cards on board of airplanes, in hospitals or near petrol stations, blastingareas (with electro-explosive devices), medical implants or body-worn electronic medical devices, suchas pace makers.• In any other environment where the risk of interference to other devices or services is perceived oridentified as harmful.If you are uncertain of the policy that applies to the use of wireless devices in a specific organization (such asairport or hospital), you are encouraged to ask for authorization to use integrated wireless cards prior toturning on the computer.Location of the UltraConnect wireless antennasThinkPad notebook computers feature an integrated UltraConnect™wireless antenna system built into thedisplay for optimal reception, enabling wireless communication wherever you are.Antenna location1Wireless LAN antenna2Wireless LAN antennaLocating wireless regulatory noticesFor more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with yourcomputer.132 User Guide
If your computer is shipped without the Regulatory Notice, you can find it on the Web site at:http://www.lenovo.com/UserManualExport classification noticeThis product is subject to the United States Export Administration Regulations (EAR) and has an ExportClassification Control Number (ECCN) of 4A994.b. It can be re-exported except to any of the embargoedcountries in the EAR E1 country list.Electronic emission noticesFederal Communications Commission Declaration of ConformityThe following information refers to the ThinkPad E450, machine type 20DC (Tx) and 20DD (Rx); ThinkPadE455, machine type 20DE.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult an authorized dealer or service representative for help.Lenovo is not responsible for any radio or television interference caused by using other than specified orrecommended cables and connectors or by unauthorized changes or modifications to this equipment.Unauthorized changes or modifications could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Responsible Party:Lenovo (United States) Incorporated1009 Think Place - Building OneMorrisville, NC 27560Phone Number: 919-294-5900Industry Canada Class B emission compliance statementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Appendix A. Regulatory information 133
European Union - Compliance to the Electromagnetic CompatibilityDirectiveThis product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on theapproximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannotaccept responsibility for any failure to satisfy the protection requirements resulting from a non-recommendedmodification of the product, including the installation of option cards from other manufacturers.This product has been tested and found to comply with the limits for Class B Information TechnologyEquipment according to European Standard EN 55022. The limits for Class B equipment were derivedfor typical residential environments to provide reasonable protection against interference with licensedcommunication devices.EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, SlovakiaGerman Class B compliance statementDeutschsprachiger EU Hinweis:Hinweis für Geräte der Klasse B EU-Richtlinie zur Elektromagnetischen VerträglichkeitDieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG (früher 89/336/EWG) zurAngleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaatenund hält die Grenzwerte der EN 55022 Klasse B ein.Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zubetreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden.Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produktohne Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohneEmpfehlung der Lenovo gesteckt/eingebaut werden.Deutschland:Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von BetriebsmittelnDieses Produkt entspricht dem „Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln“EMVG (früher „Gesetz über die elektromagnetische Verträglichkeit von Geräten“). Dies ist die Umsetzung derEU-Richtlinie 2004/108/EG (früher 89/336/EWG) in der Bundesrepublik Deutschland.Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeitvon Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetischeVerträglichkeit von Geräten), bzw. der EMV EG Richtlinie 2004/108/EC (früher 89/336/EWG), fürGeräte der Klasse B.Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen- CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo(Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart.Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4:Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.134 User Guide
Korea Class B compliance statementJapan VCCI Class B compliance statementJapan compliance statement for products which connect to the powermains with rated current less than or equal to 20 A per phaseLenovo product service information for TaiwanEurasian compliance markBrazil regulatory noticeOuvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.Mexico regulatory noticeAdvertencia: En Mexico la operación de este equipo estásujeta a las siguientes dos condiciones: (1) esposible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debeaceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.Appendix A. Regulatory information 135
136 User Guide
Appendix B. WEEE and recycling statementsLenovo encourages owners of information technology equipment to responsibly recycle their equipmentwhen it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners inrecycling their IT products. Information on product recycling offerings can be found on Lenovo's Internet siteat http://www.lenovo.com/social_responsibility/us/en/.Important WEEE informationThe WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for example,European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011). Appliances arelabeled in accordance with local regulations concerning waste electrical and electronic equipment (WEEE).These regulations determine the framework for the return and recycling of used appliances as applicablewithin each geography. This label is applied to various products to indicate that the product is not to bethrown away, but rather put in the established collection systems for reclaiming these end of life products.Users of electrical and electronic equipment (EEE) with the WEEE marking must not dispose of end of lifeEEE as unsorted municipal waste, but use the collection framework available to them for the return, recycle,and recovery of WEEE and to minimize any potential effects of EEE on the environment and human healthdue to the presence of hazardous substances. For additional WEEE information go to:http://www.lenovo.com/recyclingJapan recycling statementsCollecting and recycling a disused Lenovo computer or monitorIf you are a company employee and need to dispose of a Lenovo computer or monitor that is the propertyof the company, you must do so in accordance with the Law for Promotion of Effective Utilization ofResources. Computers and monitors are categorized as industrial waste and should be properly disposedof by an industrial waste disposal contractor certified by a local government. In accordance with the Lawfor Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting andRecycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details,visit the Lenovo Web site at http://www.lenovo.com/recycling/japan.Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling ofhome-used computers and monitors by the manufacturer was begun on October 1, 2003. This serviceis provided free of charge for home-used computers sold after October 1, 2003. For details, go tohttp://www.lenovo.com/recycling/japan.© Copyright Lenovo 2014 137
Disposing of Lenovo computer componentsSome Lenovo computer products sold in Japan may have components that contain heavy metals or otherenvironmental sensitive substances. To properly dispose of disused components, such as a printed circuitboard or drive, use the methods described above for collecting and recycling a disused computer or monitor.Disposing of disused lithium batteries from Lenovo computersA button-shaped lithium battery is installed inside your Lenovo computer to provide power to the computerclock while the computer is off or disconnected from the main power source. If you need to replace it with anew one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disusedlithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposaloperator, and follow their instructions.Disposal of a lithium battery must comply with local ordinances and regulations.Disposing of a disused battery from Lenovo notebook computersYour Lenovo notebook computer has a lithium ion battery or a nickel metal hydride battery. If you are acompany employee who uses a Lenovo notebook computer and need to dispose of a battery, contact theproper person in Lenovo sales, service, or marketing, and follow that person's instructions. You also canrefer to the instructions at http://www.lenovo.com/jp/ja/environment/recycle/battery/.If you use a Lenovo notebook computer at home and need to dispose of a battery, youmust comply with local ordinances and regulations. You also can refer to the instructions athttp://www.lenovo.com/jp/ja/environment/recycle/battery/.Recycling information for BrazilDeclarações de Reciclagem no BrasilDescarte de um Produto Lenovo Fora de UsoEquipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos decoleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresasespecializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, deacordo com a legislação local.A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos. Caso você possuaum produto Lenovo em situação de descarte, ligue para o nosso SAC ou encaminhe um e-mail para:reciclar@lenovo.com, informando o modelo, número de série e cidade, a fim de enviarmos as instruçõespara o correto descarte do seu produto Lenovo.Battery recycling information for the European Union138 User Guide
Notice: This mark applies only to countries within the European Union (EU).Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/ECconcerning batteries and accumulators and waste batteries and accumulators. The Directive determines theframework for the return and recycling of used batteries and accumulators as applicable throughout theEuropean Union. This label is applied to various batteries to indicate that the battery is not to be thrownaway, but rather reclaimed upon end of life per this Directive.In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicatethat they are to be collected separately and recycled at end of life. The label on the battery may alsoinclude a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd forcadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsortedmunicipal waste, but use the collection framework available to customers for the return, recycling, andtreatment of batteries and accumulators. Customer participation is important to minimize any potentialeffects of batteries and accumulators on the environment and human health due to the potential presence ofhazardous substances. For proper collection and treatment, go to:http://www.lenovo.com/lenovo/environmentBattery recycling information for TaiwanBattery recycling information for the United States and CanadaRecycling information for Chinahttp://support.lenovo.com.cn/activity/551.htmAppendix B. WEEE and recycling statements 139
140 User Guide
Appendix C. Restriction of Hazardous Substances Directive(RoHS)European Union RoHSLenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronicequipment (“RoHS recast” or “RoHS 2”).For more information about Lenovo progress on RoHS, go to:http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdfChina RoHSIndia RoHSRoHS compliant as per E-Waste (Management & Handling) Rules, 2011.Turkish RoHSThe Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Useof Certain Hazardous Substances in Electrical and Electronic Equipment (EEE).© Copyright Lenovo 2014 141
Ukraine RoHS142 User Guide
Appendix D. ENERGY STAR model informationENERGY STAR®is a joint program of the U.S. Environmental Protection Agency and the U.S. Departmentof Energy aimed at saving money and protecting the environment through energy efficient products andpractices.Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. Lenovocomputers of the following machine types, if the ENERGY STAR mark is affixed, have been designed andtested to conform to the ENERGY STAR program requirements for computers.20DC (Tx), 20DD (Rx), and 20DEBy using ENERGY STAR qualified products and taking advantage of the power-management featuresof your computer, you can help reduce the consumption of electricity. Reduced electrical consumptioncan contribute to potential financial savings, a cleaner environment, and the reduction of greenhouse gasemissions.For more information about ENERGY STAR, go to:http://www.energystar.govLenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. Tohelp in this endeavor, Lenovo has preset the following power-management features to take effect when yourcomputer has been inactive for a specified length of time:By using ENERGY STAR qualified products and taking advantage of the power-management featuresof the computer, you can help reduce the consumption of electricity. Reduced electrical consumptioncan contribute to potential financial savings, a cleaner environment, and the reduction of greenhouse gasemissions.For more information about ENERGY STAR, go to:http://www.energystar.govLenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. Tohelp in this endeavor, Lenovo has preset the following power-management features to take effect when thecomputer has been inactive for a specified length of time:Power plan: Energy Saver (settings when plugged into ac power)• Turn off the display: After 10 minutes• Put the computer into sleep: After 20 minutes• Advanced power settings:– Turn off hard disks: After 15 minutes– Hibernate: Never© Copyright Lenovo 2014 143
To awaken the computer from sleep mode, press the Fn key on your keyboard. For more information aboutthese settings, see the Windows Help and Support information on the computer.The Wake on LAN function is enabled when your Lenovo computer is shipped from the factory, and thesetting remains valid even when the computer is in sleep mode. If you do not need to have Wake on LANenabled while the computer is in sleep mode, you can reduce the power consumption and prolong the timein sleep mode, by disabling the setting of Wake on LAN for sleep mode.To disable the setting of Wake on LAN for sleep mode, do the following:1. Click Start ➙Control panel.2. Click Hardware and Sound ➙Device Manager.3. In the Device Manager window, expand Network adapters.4. Right-click your network adapter device, and click Properties.5. Click the Power Management tab.6. Clear the Allow this device to wake the computer check box.7. Click OK.144 User Guide
Appendix E. NoticesLenovo may not offer the products, services, or features discussed in this document in all countries. Consultyour local Lenovo representative for information on the products and services currently available in yourarea. Any reference to a Lenovo product, program, or service is not intended to state or imply that only thatLenovo product, program, or service may be used. Any functionally equivalent product, program, or servicethat does not infringe any Lenovo intellectual property right may be used instead. However, it is the user'sresponsibility to evaluate and verify the operation of any other product, program, or service.Lenovo may have patents or pending patent programs covering subject matter described in this document.The furnishing of this document does not give you any license to these patents. You can send licenseinquiries, in writing, to:Lenovo (United States), Inc.1009 Think Place - Building OneMorrisville, NC 27560U.S.A.Attention: Lenovo Director of LicensingLENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSOR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allowdisclaimer of express or implied warranties in certain transactions, therefore, this statement may not applyto you.This information could include technical inaccuracies or typographical errors. Changes are periodicallymade to the information herein; these changes will be incorporated in new editions of the publication.Lenovo may make improvements and/or changes in the product(s) and/or the application(s) described in thispublication at any time without notice.The products described in this document are not intended for use in implantation or other life supportapplications where malfunction may result in injury or death to persons. The information contained in thisdocument does not affect or change Lenovo product specifications or warranties. Nothing in this documentshall operate as an express or implied license or indemnity under the intellectual property rights of Lenovoor third parties. All information contained in this document was obtained in specific environments and ispresented as an illustration. The result obtained in other operating environments may vary.Lenovo may use or distribute any of the information you supply in any way it believes appropriate withoutincurring any obligation to you.Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not inany manner serve as an endorsement of those Web sites. The materials at those Web sites are not part ofthe materials for this Lenovo product, and use of those Web sites is at your own risk.Any performance data contained herein was determined in a controlled environment. Therefore, the resultobtained in other operating environments may vary significantly. Some measurements may have beenmade on development-level systems and there is no guarantee that these measurements will be the sameon generally available systems. Furthermore, some measurements may have been estimated throughextrapolation. Actual results may vary. Users of this document should verify the applicable data for theirspecific environment.© Copyright Lenovo 2014 145
TrademarksThe following terms are trademarks of Lenovo in the United States, other countries, or both:LenovoAccess ConnectionsActive Protection SystemSecure Data DisposalThinkPadThinkPad logoThinkVantageTrackPointUltraConnectIntel and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation or its subsidiaries inthe United States and other countries.Microsoft, Windows, Direct3D, and BitLocker are trademarks of the Microsoft group of companies.AMD and AMD-V are trademarks or registered trademark of Advanced Micro Devices, Inc.DisplayPort is a Trademark of the Video Electronics Standards Association.The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and other countries.Other company, product, and service names may be trademarks or service marks of others.146 User Guide

Navigation menu